Press Release June 7, 2013 No

Total Page:16

File Type:pdf, Size:1020Kb

Press Release June 7, 2013 No Press Release June 7, 2013 No. 59/13 Efficiency and performance for 50 years: the flat-six engines from Porsche “Engine of the Year Award” for the 2.7-litre flat-six engine Stuttgart. Once again, a flat-six engine from Porsche has been named “Engine of the Year”. This year, the international jury gave the renowned award to the 2.7-litre engine that is used in the Boxster and the Cayman for the 2.5 to 3.0-litre engine displacement class. “A brilliant engine for a brilliant car. This centrepiece of Porsche technology combines performance and a sporty pedigree with impressive fuel efficiency.” This is how Dean Slavnich of “Engine Technology International Magazine” supported the jury’s decision. The British trade magazine has been giving this award for excellent engines for 15 years now. The jury also praised the flexibility and responsiveness, performance and smooth running of the smallest-displacement flat engine from Porsche. The sport engine was derived from the 3.4-litre engine based on the downsizing principle, and together with the PDK transmission (Porsche Doppelkupplung) in the Cayman it offers a power of 275 hp (202 kW) combined with a NEDC fuel consumption of 7.7 l/100 km (180 g/km CO2). Its specific power of 101.6 hp/l means that this six-cylinder engine surpasses the magic limit of 100 hp per litre engine displacement. This is the fourth time that a flat engine from Porsche has won this competition between the best engines in the world. In 2007, Porsche has already won in the category of three to four-litre engines with the engine of the 911 Turbo. In 2008, the Dr. Ing. h.c. F. Porsche Aktiengesellschaft 1 of 6 Public Relations and Press Porscheplatz 1 Technical Communications 70435 Stuttgart Hermann-Josef Stappen Phone +49 (0)711 911 – 25231 Email [email protected] Press Release June 7, 2013 No. 59/13 turbocharged 3.6-litre flat engine with 480 hp even won in the open displacement class. In 2009, the 3.8-litre six-cylinder engine of the 911 Carrera S was named “Best New Engine”. The choice of “Engine of the Year” is made by 87 highly regarded automotive journalists from 35 countries who evaluate the engines in various categories. Along with power, fuel economy, driving properties and comfort, the use of innovative technologies is also assessed. Advantages: compact and light, high-revving and smooth – for 50 years The 50 years of Porsche 911 also represents 50 years of the flat-six engine. Not simply for tradition sake, but because of its advantages: it is very flat, lightweight and compact. The flat engine with six cylinders is very smooth running, and it has neither free moments nor free forces of inertia. In addition, horizontally opposed engines are very well suited to lowering a vehicle’s centre of gravity. The horizontal cylinders enable very low-profile construction. And the lower a vehicle’s centre of gravity, the sportier it can be driven. Another of the most prominent traits of the Porsche flat-six engines is their low fuel consumption in relation to their power. This excellent fuel efficiency is based on the overall concept that is influenced by motorsports. It is based on systematic lightweight design, high-revving and a large specific power as a result of its advantageous charge cycle. These basic traits were crucial in the decision to develop a six cylinder engine with an opposing cylinder layout for the first 911. This resulted in an air-cooled flat-six engine with axial blower and – due to its higher rev reserves and improved smooth running – one overhead camshaft per side. At first, the displacement was specified as two litres, and the engine was designed for potential increases up to 2.7 litres. In those days, no Porsche engine specialist could have predicted that this engine type would be continued in its basic form right up to the year 1998 and would finally reach 3.8 litres of displacement. Dr. Ing. h.c. F. Porsche Aktiengesellschaft 2 of 6 Public Relations and Press Porscheplatz 1 Technical Communications 70435 Stuttgart Hermann-Josef Stappen Phone +49 (0)711 911 – 25231 Email [email protected] Press Release June 7, 2013 No. 59/13 World premiere in 1963 with 130 hp from two litres of displacement At the world premiere of the 911, which was initially known as the 901 at the Frankfurt Motor Show (IAA) in 1963, the flat-six engine produced a power of 130 hp at 6,100/min from its two litres of displacement. The success of the new sports car quickly led to customer wishes for more power. Porsche responded, and the 911 S made its debut in model year 1967 with 160 hp at 6,600/min – the base model was soon designated the 911 L, and later the 911 E. At that time, the engineers were especially proud that despite the added power and a power-to-displacement ratio of 80 hp per litre, there were no compromises in terms of engine life. The 911 not only established itself on the world market based on its efficient performance, but also by its technological progress. In 1968, Porsche offered the sports car with an emissions control system for the USA. A special aspect of this system: Porsche was able to satisfy US emissions regulations – including the especially stringent rules for California – without any compromises in performance and with nearly identical driving comfort. Hazardous emissions were controlled by exhaust gas recirculation in the induction manifold and by thermal reactors. In its development work, Porsche was the first company in Europe to ever install roller dynamometers for emissions testing. In autumn 1968, Porsche introduced mechanical petrol injection with six-piston pump. In addition to increasing displacement, it also added more power and torque. In 1969, the six-cylinder engine first grew to 2.2 litres, then two years later to 2.4 litres. This resulted in 180 hp of power for the 911 S at first and then 190 hp. In 1971, engine compression was reduced so that all 911 cars could be powered by regular petrol worldwide. In close cooperation with Bosch, Porsche developed the K-Jetronic – an improved, continuous fuel injection system, which was first introduced in the US models in 1972. Dr. Ing. h.c. F. Porsche Aktiengesellschaft 3 of 6 Public Relations and Press Porscheplatz 1 Technical Communications 70435 Stuttgart Hermann-Josef Stappen Phone +49 (0)711 911 – 25231 Email [email protected] Press Release June 7, 2013 No. 59/13 In 1974, the 911 Turbo made its debut as the first production sports car with a turbocharger In 1973, all engines in the 911 generation designated as “G models” were converted to engine displacements of 2.7 litres, and operation with unleaded regular petrol was made possible – here Porsche proved once again that sports cars could be eco- friendly. In 1974, a legend made its first appearance: Porsche introduced the 911 Turbo, the first production sports car with a turbocharger. In this car, engineers transferred their extensive experience with turbocharged engines from motorsport into series production. The engine was based on the engine of the 911 Carrera RS 3.0 which produced 260 hp and a torque of 343 Newton metres which took the car to a top speed of over 250 km/h. Advanced development of the six cylinder engine brought displacement and power enhancements over several stages, combined with highly advanced emissions control technology. Porsche built the first flat engines with regulated catalytic converters in 1980. Three years later, a new generation of naturally aspirated engines was presented, which had 3.2 litres of displacement and digital engine electronics. All of the engines were now designed for unleaded regular petrol – in many European countries this fuel was still unavailable, but the engine design offered flexibility. In 1988, Porsche made further improvements to the combustion process and developed a cylinder head with two spark plugs per combustion chamber. The air-cooled flat engine reached its zenith with the naturally aspirated engine of the 993 model series, which produced 300 hp from 3.8 litres of displacement in the top model 911 Carrera RS in 1995. There was a limited edition series of the 911 GT2, a car derived from motorsport, whose 3.6-litre engine first developed 430 hp with the help of two turbochargers and then 450 hp in model year 1998. The 911 Turbo also adopted the biturbo concept, and another global innovation was the OBD II emissions control monitoring system. The now 408 hp engine was still based on the naturally aspirated 3.6-litre engine, but it had been modified so extensively that it was considered an independent design. Dr. Ing. h.c. F. Porsche Aktiengesellschaft 4 of 6 Public Relations and Press Porscheplatz 1 Technical Communications 70435 Stuttgart Hermann-Josef Stappen Phone +49 (0)711 911 – 25231 Email [email protected] Press Release June 7, 2013 No. 59/13 In 1996, the first water-cooled flat-six engine from Porsche celebrated its world premiere The engine of the new Boxster model series represented a quantum leap in the development history of the flat-six engines from Porsche at its world premiere in 1996. For the first time, Porsche implemented a water-cooled engine that had 2.5 litres of displacement and 204 hp of power. Freed of the restrictions of the previous six cylinder engine with air cooling, engine developers gave the new engine a cylinder head with two camshafts and four valves per cylinder.
Recommended publications
  • Sme1601 Advanced Internal Combustion Engineering
    SCHOOL OF MECHANICAL ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING SME1601 ADVANCED INTERNAL COMBUSTION ENGINEERING UNIT I INTRODUCTION TO I.C ENGINES I. INTRODUCTION TO I.C ENGINES Classification of I.C Engines-Thermodynamics of Air Standard Otto and Diesel Cycles – Working of 4 Stroke and 2 stroke –S.I and C.I engines– Comparison of S.I and C.I Engines-I.C engine fuels, types, Combustion of fuels-Rating of fuels – composition of petrol and diesel fuels - importance Of valve and port timing. As the name implies or suggests, the internal combustion engines (briefly written as IC engines) are those engines in which the combustion of fuel takes place inside the engine cylinder. These are petrol, diesel, and gas engines. CLASSIFICATION OF IC ENGINES The internal combustion engines may be classified in many ways, but the following are important from the subject point of view 1. According to the type of fuel used (a) Petrol engines. (b) Diesel engines or oil engines, and (c) Gas engines. 2. According to the method of igniting the fuel (a) Spark ignition engines (briefly written as S.1. engines), (b) Compression ignition engines (briefly written as C.I. engines), and (c) Hot spot ignition engines 3. According to the number of strokes per cycle (a) Four stroke cycle engines, and (b) Two stroke cycle engines. 4. According to the cycle of operation (a) Otto. cycle (also known as constant volume cycle) engines, (b) Diesel cycle (also known as constant pressure cycle) engines, and (c) Dual combustion cycle (also known as semi-diesel cycle) engines.
    [Show full text]
  • Introduction to Internal Combustion Engines
    k Chapter 1 Introduction to Internal Combustion Engines 1.1 INTRODUCTION The goals of this textbook are to describe how internal combustion engines work and provide insight into how engine performance can be modeled and analyzed. The main focus of the text is the application of the thermal sciences, including thermodynamics, combus- tion, fluid mechanics, and heat transfer, to internal combustion engines. An aspect upon which we will put considerable emphasis is the development of idealized models to repre- sent the actual features of an operating engine. Engineers use the methods and analyses introduced in the textbook to calculate the performance of proposed engine designs and to parameterize and correlate engines experiments. With the advent of high-speed computers and advanced measurement tech- niques, today’s internal combustion engine design process has evolved from being purely k k empirical to a rigorous semi-empirical process in which computer based engineering software is used to evaluate the performance of a proposed engine design even before the engine is built and tested. In addition to detailed analysis, the textbook contains numerous computer routines for calculating the various thermal and mechanical parameters that describe internal combustion engine operation. In this chapter we discuss the engineering parameters, such as thermal efficiency, mean effective pressure, and specific fuel consumption, that are used to characterize the over- all performance of internal combustion engines. Major engine cycles, configurations, and geometries are also covered. The following chapters will apply the thermal science princi- ples to determine an internal combustion engine’s temperature and pressure profiles, work, volumetric efficiency, and exhaust emissions.
    [Show full text]
  • Service Information 2009 Technik Introduction All Boxster/Cayman Models Cardiagn.Com
    ® cardiagn.com Service Information 2009 Technik Introduction All Boxster/Cayman Models cardiagn.com Important Notice: Some of the contents of this AfterSales Training brochure was originally written by Porsche AG for its rest-of- world English speaking market. The electronic text and graphic files were then imported by Porsche Cars N.A, Inc. and edited for content. Some equipment and technical data listed in this publication may not be applicable for our market. Specifications are sub- ject to change without notice. We have attempted to render the text within this publication to American English as best as we could. We reserve the right to make changes without notice. © 2009 Porsche Cars North America, Inc. All Rights Reserved. Reproduction or translation in whole or in part is not permitted without written authorization from publisher. AfterSales Training Publications Dr. Ing. h.c. F. Porsche AG is the owner of numerous trademarks, both registered and unregistered, including without limitation the Porsche Crest®, Porsche®, Boxster®, Carrera®, Cayenne®, Cayman™, Panamera®, Tiptronic®, VarioCam®, PCM®, 911®, 4S®, FOUR, UNCOMPROMISED.SM and the model numbers and distinctive shapes of Porsche's automobiles such as, the federally registered 911 and Boxster automobiles. The third party trademarks contained herein are the properties of their respective owners. Specifications, performance standards, options, and other elements shown are subject to change without notice. Some vehicles may be shown with non-U.S. equipment. Porsche recommends seat belt usage and observance of traffic laws at all times. Printed in the USA Part Number - PNA 987 021 09 Edition - 2/09 Foreword Since its North American launch in 1997, “Boxster” has quickly become synony- mous with the ultimate in roadster feeling.
    [Show full text]
  • Internal Combustion Engine T Alrayyes Internal Combustion Engine
    Internal combustion Engine T Alrayyes Internal Combustion Engine Total Credits 3 credits Course Type Optional Name of Instructor Dr. Taleb BakrAlrayyes Email:[email protected] Text Book Pulkrabek, Willard W. Engineering Fundamentals of the Internal Combustion Engine , Prentice Hall Topics covered • Operating characteristics • Engine Standard and real Cycles • Thermochemistry and fuel • Intake and exhaust • Combustion • Emissions and air pollusion • Heat transfer in Engines Engine main strokes Early history • Huygens (1673) developed piston mechanism, Papin (1695) first to use steam in piston mechaanism • Lenoir Engine (1860): driving the piston by the expansion of burning products - first practical engine, 0.5 HP later 4.5 kW engines with mech efficiency up to 5%. several hundred of these engine • Otto-Langen Engine (1867), Mechanical Efficiency 11%. • Otto was given credit for the first built 4 stroke internal combustion Engine • 1880s the internal combustion engine first appeared. • Also in this decade the two-stroke cycle engine became practical and was manufactured in large numbers. • Diesel Engine 1892: noisy, large, single cylinder. • 1920s multicylinder engines where introduced • Daimler/Maybach (1882) Incorporated IC engine in automobile Single cylinder Otto Engine Engine parts Valves: Minimum Two Valves pre Cylinder • Exhaust Valve lets the exhaust gases escape the combustion Chamber. (Diameter is smaller then Intake valve) • Intake Valve lets the air or air fuel mixture to enter the combustion chamber. (Diameter is larger
    [Show full text]
  • DOCUMENT RESUME TITLE Basic Principles of Marine Diesel.Engines, 8-2. Military Curriculum Materials for Vocational and Technical
    DOCUMENT RESUME ED 223 901 CE 034 541 TITLE Basic Principles of Marine Diesel.Engines, 8-2. Military Curriculum Materials for Vocational and Technical Education. INSTITUTION Army Transportation School, Fort Eustic, VA.;Ohio State Univ., Columbus. National Center for Research in Vocational Edudation. SPONS AGENCY Office of Education (DHEW), Washington, D.C. PUB DATE 78 NOTE 110p. PUB TYPE Guides - Classroom Use Materials (For Learner) (051) EDRS PRICE MF01/PC05 Plus Postage. DESCRIPTORS Behavioral Objectives; *Diesel Engines; Individualized Instruction; Learning Activities; *Mechanics (Process); Pacing; Postsecondary Education; Secondary Education; Tests; Textbooks; *Trade and Industrial Education IDENTIFIERS *Marine Equipment; Military Curriculum Project ABSTRACT This volume of student materials for a secondary/postsecondary level course in principles of marine diesel engines is,one of a number of.military-developed curriculumpackages selected for adaptation to vocational instruction andcurriculum development in a civilian setting. The purpose of theindividualized, self-paced course is to acquaint students with theoperating cycles and systems that make ,up a diesel engine. Itprovides theory that is useful in laboratory and on-the-job learningexperiences. The course is divided into two lessons: Diesel EngineConstruction, Principles, and Structural Parts; and Valve Gear, FuelInjection, and Governors. These materials are included: the reference text,"Basic Principles of Marine Diesel Engines" (five chapters and anappended glossary); and
    [Show full text]
  • The 996: First 911 with Water-Cooled Flat Engine
    The 996: First 911 with water-cooled flat engine With the fifth generation of the 911 introduced in 1997 – the type 996 – Porsche took the bold step to stop using air-cooled engines. After 34 years, the sports car manufacturer completely revamped its icon with the new 911 and in doing so solved a number of urgent challenges. As part of a process that had started with the predecessor, the focus was on reducing production costs through maximum compatibility of parts with other model series, such as the Boxster, as well as on meeting updated safety and emissions regulations. Porsche found its path into the future with the 996. It did this by preserving classic proportions and combining them with modern technology – in short, re-inventing a sports car legend and preparing it for the future. The 996 had a difficult legacy to follow, but it also represented the first chapter of a new era. That was already clear in the design. The result was a newly developed body, which impressed with an elegant, no-frills look. The dimensions also grew: The new 911 was now 18.5 centimetres longer, and the wheelbase was also lengthened for the second time in the history of the model series. This increased by 80 mm, while the body width also added another three centimetres. The interior also benefited from these changes: the 996 offered more elbow room and a more generous feeling of spaciousness. The dashboard also had a new look: the five round instruments merge into each other – another break with tradition.
    [Show full text]
  • EJ Engines 101.Pdf
    EJ Engines 101 Disclaimer: The below is for reference purposes only. It may not be accurate. It was collected from many sources and again, the below information is just informational. Please use at your own risk. Identifying An EJ A 10-digit engine code is used by Subaru: the first 2 characters identify the engine series. The 3rd & 4th identify displacement volume in liters. The 5th digit is a sub-series identifier and fuel system flag. The 6th digit identifies emissions regulations it conforms to, while the 7th digit shows the intended transmission it was mated with. The final 3 digits are minor production change codes. The series engine is also physically embossed on the top of the engine block, to the left of the alternator. EJ15 1.5 Litre SOHC Usage: * Impreza (JDM only, though often seen in gray market exports to eastern Europe and Russia.) EJ16 1.6 Litre SOHC, 90 hp (67 kW) @ 5600 rpm. Usage: * Impreza 93-94 (JDM only) * Impreza 93-06 (Europe & Middle East) * Impreza 93-97 (Australia) EJ18 1.8 Litre SOHC 110 hp (82 kW) @ 5600 rpm. Usage: * Impreza 93-99 * Legacy (non-USDM) 90-96 EJ20 2.0 Litre SOHC or DOHC EJ20T This is not actually a valid code from Subaru, but is mostly used by enthusiasts and also mechanics to describe the entire line of 2.0 litre turbocharged engines that have been available over time. When referring to the EJ20T, one is speaking of one of the following: EJ20G EJ20G fall in to 2 categories -early engines 1989-9/1996 -late wagon and automatic sedans from 1994/1996 and later to identify an early EJ20G * Coil on plug * Divorced idle air wer q Late model EJ20Gs are the same general design as the EJ20K 3a q3t Usage: * Legacy RS 89-93 * Legacy RS-RA 89-93 * Legacy GT 89-93 * Impreza WRX 92~96 * Impreza WRX Wagon 92~98 * Impreza WRX STi 94~96 227 hp (169 kW) @ 4000 rpm EJ20K to identify an EJ20K * Wasted spark coil pack on center of manifold * Inlet under manifold * Divorced idle air controller Usage: * Impreza WRX & STi 9/96~9/98 EJ205 This engine series is used for non-Japanese marketed WRX models in the world market as of 1999.
    [Show full text]
  • The History and Development of the V8 Engine
    The History and Development of the V8 Engine Abstract First developed in 1876 by Nicolaus Otto, the internal combustion engine has revolutionised personal transport since it was first fitted to a three­wheeled automobile ten years later. Obviously it has changed dramatically since then in terms on the technology applied in design and construction, but the basic principles of operation remain the same. Originally a single cylinder design, the number of cylinders has increased in attempts to increase smoothness and power. Several engine layout configurations have been developed, one of which is the V­ style engine. So why look at the V8 in particular? First produced in 1914, the V8 engine is a fairly compact layout for large engine sizes (which were needed in order to move heavy vehicles at sufficient speed) and proved to be the most popular engine layout (in terms of sales) in America since it was introduced and has become famous worldwide. One major reason for this is the noise. Although there have been many great sounding engines over the decades, from various cylinder layouts, almost all V8s sound special and are loved by car enthusiasts. This, along with a wide range of capacities (from under 2 litres to over 8 litres in mass produced form), has earned them places in a wide variety of vehicles ­ initially just in large saloons ­ but later in sports cars, off road vehicles, powerboats, the occasional aeroplane and even a motorbike. The passion towards the V8 design ensures that it will endure. Introduction The idea of an internal combustion engine was first designed in 1680 (although never built) by a Dutch physicist named Christian Huygens.
    [Show full text]
  • Introduction to Internal Combustion Engines
    Chapter 1 Introduction to Internal Combustion Engines 1.1 INTRODUCTION The main focus of this text is on the application of the engineering sciences, especially the thermal sciences, to internal combustion engines. The goals of the text are to familiarize the reader with engine nomenclature, describe how internal combustion engines work, and provide insight into how engine performance can be modeled and analyzed. An internal combustion engine is defined as an engine in which the chemical energy of the fuel is released inside the engine and used directly for mechanical work, as opposed to an external combustion engine in which a separate combustor is used to burn the fuel. In this chapter, we discuss the engineering parameters that are used to characterize the overall performance of internal combustion engines. Major engine cycles, configu- rations, and geometries are covered. The following chapters will apply the principles of thermodynamics, combustion, fluid flow, friction, and heat transfer to determine an inter- nal combustion engine’s temperature and pressure profiles, work, thermal efficiency, and exhaust emissions. An aspect upon which we have put considerable emphasis is the process of constructing idealized models to represent actual physical situations in an engine. Throughout the text, we will calculate the values of the various thermal and mechanical parameters that characterize internal combustion engine operation. With the advent of high-speed computers and advanced measurement techniques, today’s internal combustion engine design process has evolved from being purely empirical to a rigorous semiempirical process in which computer-based engineering software is used to evaluate the performance of a proposed engine design even before the engine is built and tested.
    [Show full text]
  • Design and Analysis of Cylinder and Cylinder Head of 4-Stroke SI Engine for Weight Reduction
    Ravindra R. Navthar et al. / International Journal of Engineering Science and Technology (IJEST) Design and Analysis of Cylinder and Cylinder head of 4-stroke SI Engine for weight reduction Ravindra R. Navthar 1 [email protected] Prashant A. Narwade 2 1 & 2 Asst. Prof. Dept. of Mechanical Engineering, P.D.V.V.P. College of Engineering Ahmednagar-414111, Maharashtra , India. Abstract The present paper deals with design of cylinder & cylinder head with air cooling system for 4 strokes 4 cylinder SI engine. The main objective of design is to reduce weight to power ratio & will result in producing high specific power. The authors have proposed preliminary design cylinder & cylinder head of a horizontally opposed SI engine, which develops 120 BHP and posses the maximum rotational speed of 6000rpm. Four stroke opposed engine is inherently well balanced due to opposite location of moving masses and also it provides efficient air cooling. For the requirement of weight reduction the material selected for design of cylinder and cylinder head is Aluminum alloy that is LM-13. The cylinder bore coating using NIKASIL coating was done to improve strength of cylinder with minimum weight.. 1.0 Introduction : Horizontally opposed four stroke four cylinder si engine:- A flat-4 or horizontally-opposed-4 is a flat engine with four cylinders arranged horizontally in two banks of two cylinders on each side of a central crankcase. The pistons are usually mounted on the crankshaft such that opposing pistons move back and forth in opposite directions at the same time. The general layout of this engine is shown in fig.
    [Show full text]
  • An Introduction to the M-14P for Flat-Engine Pilots by Fred
    An Introduction to the M-14P for Flat-Engine Pilots By Fred Abramson If you learned to fly in Russia, most of what is in this article is probably second nature to you. But if you, like me, learned to fly in the good old U.S. of A., sitting behind horizontally opposed Lycomings and Continentals, the M14P may have some surprises in store for you. Expensive surprises. Maybe even scary surprises. Now, lest anyone get the wrong impression, the M14P really is a wonderful engine. It's strong, robust, and has a lot of character. It is, of course, basically the same kind of animal as the aforementioned flat engines. It just has a different growl, different needs, and its table manners are a little more messy. I believe that the M14P is just as reliable as our flat engines, too. It's just a matter of knowing how to maintain and operate it. So, how did I get my experience with this wonderful engine? Well, I purchased a Sukhoi 26 in 1993, and have put well over a thousand hours on it since then. I've learned lots of things from reading and talking with folks since 1993. I've learned some things more vividly from my direct experience. I wish people had told me about these things before I learned them. What do they say? "Experience is the thing you get the moment after you needed to have it." Also, it's only fair to tell you that although I often get oil on my hands, and occasionally bust my knuckles, I'm not a mechanic.
    [Show full text]
  • And Six-Cylinder Engines
    70 years of Porsche Sports Cars Porsche AG 02. Juni 2017 70 Jahreyears of flat engines at Porsche Porsche AG 02. Juni 2017 1948: 356 “No. 1” Roadster First Porsche to get a Engine: Flat four-cylinder Displacement: 1,131 cm³ flat four-cylinder engine Output: 26 kW (35 hp) Max. torque: 69 Nm 0 - 100 km/h: 23.0 s Top speed: 135 km/h 1962: 356 B GS 2000 Carrera Fuhrmann engine with four camshafts Engine: Flat four-cylinder Displacement: 1,966 cm³ and vertical shafts; built 1953 to 1964 Output: 96 kW (130 hp) Max. torque: 162 Nm 0 - 100 km/h: 9.0 s Top speed: 200 km/h 1963: Original 911 – the birth of an icon First Porsche to get a Engine: Flat six-cylinder Displacement: 1,991 cm³ flat six-cylinder engine Output: 96 kW (130 hp) Max. torque: 174 Nm 0 - 100 km/h: 9.1 s Top speed: 210 km/h 1973: 911 (G model) – the next generation Bosch K-Ketronic Engine: Flat six-cylinder Displacement: 2,687 cm³ replaces mechanical manifold injection Output: 110 kW (150 hp) Max. torque: 235 Nm 0 - 100 km/h: 8.5 s Top speed: 210 km/h 1974: 911 Turbo First Porsche to get a flat six-cylinder Engine: Flat six-cylinder Displacement: 2,994 cm³ engine with turbocharging; starting in Output: 191 kW (260 hp) 1977 with 3.3 litres displacement, Max. torque: 343 Nm 300 hp and intercooler 0 - 100 km/h: 5.5 s Top speed: 250 km/h 1980: 911 SC (G model) Displacement increased to 3.0 litres Engine: Flat six-cylinder Displacement: 2,994 cm³ Output: 150 kW (204 hp) Max.
    [Show full text]