Air Pollution Control Regulations

Total Page:16

File Type:pdf, Size:1020Kb

Air Pollution Control Regulations STATE OF VERMONT AGENCY OF NATURAL RESOURCES AIR POLLUTION CONTROL REGULATIONS INCLUDING AMENDMENTS TO THE REGULATIONS ADOPTED THROUGH: AUGUST 31, 2018 AIR QUALITY & CLIMATE DIVISION DEPARTMENT OF ENVIRONMENTAL CONSERVATION AGENCY OF NATURAL RESOURCES DAVIS 2 ONE NATIONAL LIFE DRIVE MONTPELIER, VERMONT 05620-3802 TELEPHONE: (802) 828-1288 WEBSITE: http://dec.vermont.gov/air-quality PERSONS REQUIRING ADDITIONAL INFORMATION REGARDING THESE REGULATIONS OR OTHER MATTERS RELATING TO AIR POLLUTION IN VERMONT SHOULD WRITE TO: HEIDI HALES, DIRECTOR AIR QUALITY & CLIMATE DIVISION DAVIS 2 ONE NATIONAL LIFE DRIVE MONTPELIER, VERMONT 05620-3802 VAPCR Adopted August 2018 [ii] VERMONT AIR POLLUTION CONTROL REGULATIONS TABLE OF CONTENTS TABLE OF CONTENTS..........................................................iii SUBCHAPTER I. DEFINITIONS*..................................................1 5-101 AS USED IN THIS PART, ALL TERMS NOT DEFINED HEREIN SHALL HAVE THE MEANING GIVEN THEM IN THE ACT................................1 SUBCHAPTER II. PROHIBITIONS................................................16 5-201 OPEN BURNING PROHIBITED.........................................16 5-202 PERMISSIBLE OPEN BURNING........................................16 5-203 PROCEDURES FOR LOCAL AUTHORITIES TO BURN NATURAL WOOD...........17 5-204 WOOD STOVES AND CENTRAL HEATERS.................................17 5-205 [REPEALED] Repealed eff. October 1, 2009........................24 5-211 PROHIBITION OF VISIBLE AIR CONTAMINANTS.........................24 5-221 PROHIBITION OF POTENTIALLY POLLUTING MATERIALS IN FUEL..........25 5-231 PROHIBITION OF PARTICULATE MATTER...............................29 5-241 PROHIBITION OF NUISANCE AND ODOR................................32 5-251 CONTROL OF NITROGEN OXIDES EMISSIONS............................33 5-252 CONTROL OF SULFUR DIOXIDE EMISSIONS.............................34 5-253 CONTROL OF VOLATILE ORGANIC COMPOUNDS...........................34 5-253.1 Petroleum Liquid Storage in Fixed Roof Tanks....................34 5-253.2 Bulk Gasoline Terminals.........................................36 5-253.3 Bulk Gasoline Plants............................................38 5-253.4 Gasoline Tank Trucks............................................40 5-253.5 Stage I Vapor Recovery Controls at Gasoline Dispensing Facilities......................................................42 5-253.6 Volatility of Gasoline..........................................49 5-253.7 [REPEALED] Repealed pursuant to 10 V.S.A. §583(a), eff. January 1, 2013.................................................49 5-253.8 Industrial Adhesives............................................49 5-253.9 Offset Lithographic and Letterpress Printing....................61 5-253.10 Paper Coating...................................................64 5-253.11 Perchloroethylene Dry Cleaning..................................66 5-253.12 Coating of Flat Wood Paneling...................................73 VAPCR Adopted August 2018 [iii] 5-253.13 Coating of Miscellaneous Metal and Plastic Parts................76 5-253.l4 Solvent Metal Cleaning..........................................91 5-253.15 Cutback and Emulsified Asphalt................................9696 5-253.16 Wood Furniture Manufacturing....................................97 5-253.17 Industrial Cleaning Solvents................................110110 5-253.18 Reserved.......................................................114 5-253.19 Reserved.......................................................114 5-253.20 Other Sources That Emit Volatile Organic Compounds.............114 5-261 CONTROL OF HAZARDOUS AIR CONTAMINANTS..........................116 5-271 CONTROL OF AIR CONTAMINANTS FROM STATIONARY RECIPROCATING INTERNAL COMBUSTION ENGINES.................................118118 SUBCHAPTER III. AMBIENT AIR QUALITY STANDARDS.............................120 5-301 SCOPE..........................................................120 5-302 SULFUR OXIDES (SULFUR DIOXIDE).................................120 5-303 RESERVED.......................................................120 5-304 PARTICULATE MATTER PM2.5 ........................................120 5-305 RESERVED.......................................................120 5-306 PARTICULATE MATTER PM10 ........................................120 5-307 CARBON MONOXIDE................................................121 5-308 OZONE..........................................................121 5-309 NITROGEN DIOXIDE...............................................121 5-310 LEAD...........................................................121 5-311 RESERVED.......................................................121 5-312 SULFATES.......................................................121 SUBCHAPTER IV. OPERATIONS AND PROCEDURES..................................122 5-401 CLASSIFICATION OF AIR CONTAMINANT SOURCES......................122 5-402 WRITTEN REPORTS WHEN REQUESTED.................................123 5-403 CIRCUMVENTION..................................................123 5-404 METHODS FOR SAMPLING AND TESTING OF SOURCES....................124 5-405 REQUIRED AIR MONITORING........................................124 5-406 REQUIRED AIR MODELING..........................................124 5-407 PREVENTION OF AIR CONTAMINANT EMISSIONS........................125 5-408 CHANGE IN OWNERSHIP OR OPERATIONAL CONTROL......................125 5-409 FALSE/MISLEADING INFORMATION...................................125 VAPCR Adopted August 2018 [iv] SUBCHAPTER V. REVIEW OF NEW AIR CONTAMINANT SOURCES.......................126 5-501 REVIEW OF CONSTRUCTION OR MODIFICATION OF AIR CONTAMINANT SOURCES........................................................126 5-502 MAJOR STATIONARY SOURCES AND MAJOR MODIFICATIONS...............128 5-503 [REPEALED] Repealed eff. February 8, 2011......................133 5-504 PERMIT FEES....................................................133 SUBCHAPTER VI. [REPEALED] Repealed eff. December 15, 2016..................135 SUBCHAPTER VII. MOTOR VEHICLE EMISSIONS...................................136 5-701 MAINTENANCE AND REMOVAL OF CONTROL DEVICES.....................136 5-702 EXCESSIVE EMISSIONS FROM MOTOR VEHICLES........................136 5-703 INSPECTION OF CONTROL DEVICES..................................136 SUBCHAPTER VIII. REGISTRATION OF AIR CONTAMINANT SOURCES..................137 5-801 DEFINITIONS....................................................137 5-802 REQUIREMENT OF REGISTRATION....................................137 5-803 REGISTRATION PROCEDURE.........................................138 5-804 COMMENCEMENT OR RECOMMENCEMENT OF OPERATION....................139 5-805 TRANSFER OF OPERATION OR OWNERSHIP.............................139 5-806 FEES...........................................................139 5-807 DETERMINATION OF FEE...........................................139 SUBCHAPTER IX. CONTROL OF OZONE-DEPLETING CHEMICALS.......................141 5-901 DEFINITIONS....................................................141 5-911 MOTOR VEHICLE AIR CONDITIONING.................................141 5-921 REGULATION OF OZONE-DEPLETING PRODUCTS.........................142 SUBCHAPTER X. OPERATING PERMITS...........................................143 5-1001 PURPOSE AND AUTHORITY..........................................143 5-1002 DEFINITIONS....................................................143 5-1003 APPLICABILITY..................................................147 5-1004 DUTY TO APPLY..................................................147 5-1005 TIMELY APPLICATIONS............................................147 5-1006 COMPLETE APPLICATION...........................................148 VAPCR Adopted August 2018 [v] 5-1007 PUBLIC PARTICIPATION...........................................152 5-1008 SECRETARY'S POWERS AND DUTIES..................................154 5-1009 ACTION ON OPERATING PERMIT APPLICATIONS........................156 5-1010 REASONABLY AVAILABLE CONTROL TECHNOLOGY (RACT).................156 5-1011 TERM OF OPERATING PERMIT.......................................157 5-1012 PERMIT EXPIRATION AND RENEWAL..................................157 5-1013 OPERATING PERMIT AMENDMENTS....................................157 5-1014 OPERATIONAL FLEXIBILITY........................................158 5-1015 PERMIT CONTENT.................................................159 5-1016 LIMITING ALLOWABLE EMISSIONS...................................162 SUBCHAPTER XI. LOW EMISSION VEHICLE PROGRAM...............................163 5-1101 DEFINITIONS....................................................163 5-1102 INCORPORATION BY REFERENCE.....................................165 5-1103 NEW VEHICLE EMISSION REQUIREMENTS..............................165 5-1104 WARRANTY.......................................................166 5-1105 RECALL.........................................................167 5-1106 MANUFACTURER FLEET REQUIREMENTS................................167 5-1107 MANUFACTURER REPORTING REQUIREMENTS............................168 5-1108 INSPECTIONS....................................................169 5-1109 SEVERABILITY...................................................169 APPENDICES AND TABLES......................................................171 APPENDIX A RULES OF EVIDENCE, OFFICIAL NOTICE.............................172 APPENDIX B HAZARDOUS AIR CONTAMINANTS.....................................173 APPENDIX C HAZARDOUS AMBIENT AIR STANDARDS................................183 APPENDIX
Recommended publications
  • Warning: the Following Lecture Contains Graphic Images
    What the новичок (Novichok)? Why Chemical Warfare Agents Are More Relevant Than Ever Matt Sztajnkrycer, MD PHD Professor of Emergency Medicine, Mayo Clinic Medical Toxicologist, Minnesota Poison Control System Medical Director, RFD Chemical Assessment Team @NoobieMatt #ITLS2018 Disclosures In accordance with the Accreditation Council for Continuing Medical Education (ACCME) Standards, the American Nurses Credentialing Center’s Commission (ANCC) and the Commission on Accreditation for Pre-Hospital Continuing Education (CAPCE), states presenters must disclose the existence of significant financial interests in or relationships with manufacturers or commercial products that may have a direct interest in the subject matter of the presentation, and relationships with the commercial supporter of this CME activity. The presenter does not consider that it will influence their presentation. Dr. Sztajnkrycer does not have a significant financial relationship to report. Dr. Sztajnkrycer is on the Editorial Board of International Trauma Life Support. Specific CW Agents Classes of Chemical Agents: The Big 5 The “A” List Pulmonary Agents Phosgene Oxime, Chlorine Vesicants Mustard, Phosgene Blood Agents CN Nerve Agents G, V, Novel, T Incapacitating Agents Thinking Outside the Box - An Abbreviated List Ammonia Fluorine Chlorine Acrylonitrile Hydrogen Sulfide Phosphine Methyl Isocyanate Dibotane Hydrogen Selenide Allyl Alcohol Sulfur Dioxide TDI Acrolein Nitric Acid Arsine Hydrazine Compound 1080/1081 Nitrogen Dioxide Tetramine (TETS) Ethylene Oxide Chlorine Leaks Phosphine Chlorine Common Toxic Industrial Chemical (“TIC”). Why use it in war/terror? Chlorine Density of 3.21 g/L. Heavier than air (1.28 g/L) sinks. Concentrates in low-lying areas. Like basements and underground bunkers. Reacts with water: Hypochlorous acid (HClO) Hydrochloric acid (HCl).
    [Show full text]
  • Section 2. Hazards Identification OSHA/HCS Status : This Material Is Considered Hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200)
    SAFETY DATA SHEET Nonflammable Gas Mixture: Arsine / Helium / Phosgene Section 1. Identification GHS product identifier : Nonflammable Gas Mixture: Arsine / Helium / Phosgene Other means of : Not available. identification Product use : Synthetic/Analytical chemistry. SDS # : 006605 Supplier's details : Airgas USA, LLC and its affiliates 259 North Radnor-Chester Road Suite 100 Radnor, PA 19087-5283 1-610-687-5253 24-hour telephone : 1-866-734-3438 Section 2. Hazards identification OSHA/HCS status : This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200). Classification of the : GASES UNDER PRESSURE - Compressed gas substance or mixture ACUTE TOXICITY (inhalation) - Category 4 GHS label elements Hazard pictograms : Signal word : Warning Hazard statements : Contains gas under pressure; may explode if heated. May displace oxygen and cause rapid suffocation. Harmful if inhaled. Precautionary statements General : Read and follow all Safety Data Sheets (SDS’S) before use. Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at hand. Close valve after each use and when empty. Use equipment rated for cylinder pressure. Do not open valve until connected to equipment prepared for use. Use a back flow preventative device in the piping. Use only equipment of compatible materials of construction. Prevention : Use only outdoors or in a well-ventilated area. Avoid breathing gas. Response : IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or physician if you feel unwell. Storage : Protect from sunlight when ambient temperature exceeds 52°C/125°F. Store in a well- ventilated place.
    [Show full text]
  • Inorganic Arsenic Compounds Other Than Arsine Health and Safety Guide
    OS INTERNATiONAL I'ROGRAMME ON CHEMICAL SAFETY Health and Safety Guide No. 70 INORGANIC ARSENIC COMPOUNDS OTHER THAN ARSINE HEALTH AND SAFETY GUIDE i - I 04 R. Q) UNEP UNITED NATIONS INTERNATIONAL ENVIRONMENT I'R( )GRAMME LABOUR ORGANISATION k\s' I V WORLD HEALTH ORGANIZATION WORLD HEALTH ORGANIZATION, GENEVA 1992 IPcs Other H EA LTH AND SAFETY GUIDES available: Aerytonitrile 41. Clii rdeon 2. Kekvau 42. Vatiadiuni 3 . I Bula not 43 Di meLhyI ftirmatnide 4 2-Buta101 44 1-Dryliniot 5. 2.4- Diehlorpheiioxv- 45 . Ac rylzi mule acetic Acid (2.4-D) 46. Barium 6. NIcihylene Chhride 47. Airaziiie 7 . ie,i-Buia nol 48. Benlm'.ie 8. Ep Ichioroli) Olin 49. Cap a 64 P. ls.ihutaiiol 50. Captaii I o. feiddin oeth N lene Si. Parai.tuat II. Tetradi ion 51 Diquat 12. Te nacelle 53. Alpha- and Betal-lexachloro- 13 Clils,i (lane cyclohexanes 14 1 kpia Idor 54. Liiidaiic IS. Propylene oxide 55. 1 .2-Diciilroetiiane Ethylene Oxide 5t. Hydrazine Eiulosiillaii 57. F-orivaldehydc IS. Die h lorvos 55. MLhyI Isobu I V I kcloiic IV. Pculaehloro1heiiol 59. fl-Flexaric 20. Diiiiethoaie 61), Endrin 2 1 . A iii in and Dick) 0in 6 I . I sh IIZiLI1 22. Cyperniellirin 62. Nicki. Nickel Caution I. and some 23. Quiiiloieiic Nickel Compounds 24. Alkthrins 03. Hexachlorocyclopeuladiene 25. Rsiiiethii ins 64. Aidicaib 26. Pyr rot ii,id inc Alkaloids 65. Fe nitrolhioit 27. Magnetic Fields hib. Triclilorlon 28. Phosphine 67. Acroleiii 29. Diiiiethyl Sull'ite 68. Polychlurinated hiphenyls (PCBs) and 30. Dc lianteth nil polyc h In ruiated letlilienyls (fs) 31.
    [Show full text]
  • Arsine Final AEGL Document
    Acute Exposure Guideline Levels for Selected Airborne Chemicals Volume 1 Subcommittee on Acute Exposure Guideline Levels Committee on Toxicology Board on Environmental Studies and Toxicology Commission of Life Sciences National Research Council NATIONAL ACADEMY PRESS Washington, DC NATIONAL ACADEMY PRESS 2101 Constitution Ave., N.W. Washington, D.C. 20418 NOTICE: The project that is the subject of this report was approved by the Governing Board of the National Research Council, whose members are drawn from the councils of the National Academy of Sciences, the National Academy of Engineering, and the Institute of Medicine. The members of the committee responsible for the report were chosen for their special competences and with regard for appropriate balance. This project was supported by Contract Nos. DAMD17-89-C-9086 and DAMD17-99-C-9049 between the National Academy of Sciences and the U.S. Army. Any opinions, findings, conclusions, or recommendations expressed in this publication are those of the author(s) and do not necessarily reflect the view of the organizations or agencies that provided support for this project. International Standard Book Number 0-309-07294-8 Additional copies of this report are available from: National Academy Press 2101 Constitution Ave., NW Box 285 Washington, DC 20055 800-624-6242 202-334-3313 (in the Washington metropolitan area) http://www.nap.edu Copyright 2000 by the National Academy of Sciences. All rights reserved. Printed in the United States of America The National Academy of Sciences is a private, nonprofit, self-perpetuating society of distinguished scholars engaged in scientific and engineering research, dedicated to the furtherance of science and technology and to their use for the general welfare.
    [Show full text]
  • 0163 Date: June 1998 Revision: February 2008 DOT Number: UN 2188
    Right to Know Hazardous Substance Fact Sheet Common Name: ARSINE Synonyms: Arsenic Hydride; Hydrogen Arsenide CAS Number: 7784-42-1 Chemical Name: Arsine RTK Substance Number: 0163 Date: June 1998 Revision: February 2008 DOT Number: UN 2188 Description and Use EMERGENCY RESPONDERS >>>> SEE BACK PAGE Arsine is a colorless gas with a garlic-like odor. It is used in Hazard Summary making electronic components, in organic synthesis, in making Hazard Rating NJDOH NFPA lead acid storage batteries, and as a military poison gas. HEALTH - 4 FLAMMABILITY - 4 Exposure to Arsine often occurs when Arsine is formed as a REACTIVITY - 2 by-product of a chemical reaction between Arsenic, or a Base CARCINOGEN Metal containing Arsenic impurities, and an acid or strong alkali FLAMMABLE AND REACTIVE (base). POISONOUS GASES ARE PRODUCED IN FIRE CONTAINERS MAY VENT RAPIDLY AND EXPLODE IN FIRE Hazard Rating Key: 0=minimal; 1=slight; 2=moderate; 3=serious; Reasons for Citation 4=severe f Arsine is on the Right to Know Hazardous Substance List because it is cited by OSHA, ACGIH, DOT, NIOSH, NTP, f Arsine can affect you when inhaled. DEP, IARC, IRIS, NFPA and EPA. f Arsine is a CARCINOGEN. HANDLE WITH EXTREME f This chemical is on the Special Health Hazard Substance CAUTION. List. f Skin and eye contact with liquid can cause frostbite. f Inhaling Arsine can irritate the lungs. Higher exposures may cause a build-up of fluid in the lungs (pulmonary edema), a medical emergency. f High exposure to Arsine can destroy red blood cells SEE GLOSSARY ON PAGE 5. (hemolysis), causing anemia.
    [Show full text]
  • Toxic Exposures Kathy L
    8 MODULE 8 Toxic Exposures Kathy L. Leham-Huskamp / William J. Keenan / Anthony J. Scalzo / Shan Yin 8 Toxic Exposures Kathy L. Lehman-Huskamp, MD William J. Keenan, MD Anthony J. Scalzo, MD Shan Yin, MD InTrODUcTIOn The first large-scale production of chemical and biological weapons occurred during the 20th century. World War I introduced the use of toxic gases such as chlorine, cyanide, an arsine as a means of chemical warfare. With recent events, such as the airplane attacks on the World Trade Center in New York City, people have become increasingly fearful of potential large-scale terrorist attacks. Consequently, there has been a heightened interest in disaster preparedness especially involving chemical and biological agents. The U.S. Federal Emergency Management Agency (FEMA) recommends an "all-hazards" approach to emergency planning. This means creating a simultaneous plan for intentional terrorist events as well as for the more likely unintentional public health emergencies, such as earthquakes, floods, hazardous chemical spills, and infectious outbreaks. Most large-scale hazardous exposures are determined by the type of major industries that exist and/or the susceptibility to different types of natural disasters in a given area. For example, in 1984 one of the greatest man-made disasters of all times occurred in Bhopal, India, when a Union Carbide pesticide plant released tons of methylisocyanate gas over a populated area, killing scores of thousands and injuring well over 250,000 individuals. The 2011 earthquake and tsunami in Japan demonstrated the vulnerability of nuclear power stations to natural disasters and the need to prepare for possible widespread nuclear contamination and radiation exposure.
    [Show full text]
  • Investigation and Risk Assessment of Ships Loaded with Chemical Ammunition Scuttled in Skagerrak
    Investigation and risk assessment of ships loaded with chemical ammunition scuttled in Skagerrak TA-1907/2002 Tørnes John Aa, Voie Øyvind A, Ljønes Marita, Opstad Aase M, Bjerkeseth Leif Haldor, Hussain Fatima Investigation and risk assessment of ships loaded with chemical ammunition scuttled in Skagerrak (TA-1907/2002) Preface The current report gives a description of the investigation carried out by Forsvarets forskningsinstitutt (FFI) of the wrecks dumped in Skagerrak after World War II with chemical ammunition on board. The aim of the investigation was to give an evaluation of the conditions of the dumped wrecks and to assess whether the chemical warfare agents have leaked out from the wrecks. This was done by using a remote-operated vehicle with video cameras. Sediment samples were collected and analysed with respect to chemical warfare agents and some related compounds. Temperature and sea current at the sea bottom was measured. This made it possible to give a rough estimate of the risks associated with leaking ammunition. Some recommendation for further work is also given. FFI, Kjeller, November 2002 Bjørn A Johnsen Director of Research 3 Investigation and risk assessment of ships loaded with chemical ammunition scuttled in Skagerrak (TA-1907/2002) 4 Investigation and risk assessment of ships loaded with chemical ammunition scuttled in Skagerrak (TA-1907/2002) Contents 1. Summary..................................................................................................7 1.1 Background .................................................................................................................
    [Show full text]
  • Analysis of Arsine and Phosphine in Ethylene and Propylene Using the Agilent Arsine Phosphine GC/MS Analyzer with a High Effi Ciency Source
    Analysis of Arsine and Phosphine in Ethylene and Propylene Using the Agilent Arsine Phosphine GC/MS Analyzer with a High Effi ciency Source Application Note Petrochemical Authors Abstract Angela Smith Henry and Bruce Quimby The Agilent Arsine Phosphine GC/MS analyzer enables detection at single-digit Agilent Technologies Inc. parts per billion (ppb) concentrations and long-term signal stability of arsine, Wilmington, DE phosphine, and other contaminants in ethylene and propylene, with relative standard deviations of ~5 % or less. Introduction Instruments The Agilent Arsine Phosphine GC/MS analyzer (G3440B with Developments in the area of metallocene catalysts have option SP1 789 0-0667) uses the Agilent 7890B GC and the signifi cantly increased productivity for the polymerization of Agilent 5977B Series GC/MSD System HES with hydrogen ethylene and propylene. However, these catalysts can also cleaning (Figure 1). Thick fi lm columns provide resolution of be more susceptible to impurities such as arsine (AsH ), 3 the four contaminants in ethylene and three contaminants phosphine (PH3), hydrogen sulfi de (H2S), and carbonyl sulfi de (PH3, AsH3, and H2S) in propylene. Table 1 lists the analysis (COS). This sensitivity to contaminants has driven a need to conditions. monitor impurities at the lowest possible detection levels. Contaminants can degrade a polymerization catalyst sooner 2-Port valve system than desired, and can potentially shut down the production SCIS process for catalyst replacement. Precise, low-level detection 5 4 3 H2 6 3 4 2 of these contaminants during the production process offers 1 2 1 the ability for olefi n producers to take steps to mitigate these He contaminants.
    [Show full text]
  • Appendix a – Prohibited Chemicals
    Appendix A – Prohibited Chemicals NFPA NFPA NFPA NFPA Name Formula CAS #Reactive Health Flammable Special 2-Butanol C2H5CH(OH)CH3 78-92-2 0 1 3 (Sec-Butyl Alcohol) Acetal 023 Acetaldehyde CH3CHO5 75-07-0 2 3 4 Acetyl Chloride CH3COCl 75-36-5 2 3 3 W Acetyl Nitrate Acrolein CH2CHCHO 107-02-8 3 4 3 Acrylic Acid H2CCHCO2H 79-10-7 2 2 2 Acrylonitrile CH2CHCN 107-13-1 2 4 3 Alcohols (Allylic, Benzylic) Alkly-Substituted Cycloaliphatics Aluminum Hydrophosphide Aluminum Phosphide AlP 20859-73- 2 4 4 W Amatol Ammonal Ammonium Bromate Ammonium Chlorate Ammonium Hexanitrocobaltate Ammonium Nitrite Ammonium Perchlorate NH4ClO4 7790-98-9 4 1 0 OX Ammonium Periodate Ammonium Permanganate 300 OX Ammonium Tetraperoxychromate A - 1 Appendix A – Prohibited Chemicals NFPA NFPA NFPA NFPA Name Formula CAS #Reactive Health Flammable Special Antimony Compounds Arsenic And Arsenic Compounds Azides Azidocarbonyl Guanidine Barium Ba 2 2 1 W Barium Chlorate Ba(ClO3)2*H2O 13477-00- 1 2 0 OX Barium Oxide (Anhydrous) BaO 1304-28-5 2 3 0 Barium Peroxide BaO2 1304-29-6 0 1 0 OX Benzene C6H6 71-43-2 0 2 3 Benzene Diazonium Chloride Benzotriazole C6H5N3 95-14-7 0 2 1 Benzoyl Peroxide (C6H5CO)2O2 94-36-0 4 1 4 OX Benzyl Alcohol C6H5CH2OH 100-51-6 0 2 1 Bismuth Nitrate Bi(NO3)3*5H2O 10035-06- 3 1 0 OX Borane,Boranes, Diboranes Boron Tribromide 230 W Boron Trifluoride 140 Bromine Pentafluoride Brf5 7789-30-2 3 4 0 W,O Bromine Trifluoride 3 4 0 W,O Butadiene C4H6/CH2=(CH)2=CH 106-99-0 0 2 4 Butenetroil Trinitrate Cadmium and Cadmium Compounds Calcium Nitrate, Anhydrous Ca(NO3)2
    [Show full text]
  • Website F Repeated Skin Contact Can Cause Thickened Skin And/Or ( Or in Your Facility’S RTK Patchy Areas of Darkening and Loss of Pigment
    Right to Know Hazardous Substance Fact Sheet Common Name: ARSENIC TRISULFIDE Synonyms: Arsenic Sesquisulfide; Arsenous Sulfide; King’s Gold CAS Number: 1303-33-9 Chemical Name: Arsenic Sulfide RTK Substance Number: 0162 Date: December 1998 Revision: July 2008 DOT Number: UN 1557 Description and Use EMERGENCY RESPONDERS >>>> SEE BACK PAGE Arsenic Trisulfide is an odorless, yellow or orange, crystalline Hazard Summary powder. It is used in the manufacture of glass, oil cloth, Hazard Rating NJDOH NFPA linoleum, electrical semi-conductors, photoconductors, and HEALTH - 3 fireworks, as a pigment, and in tanning and pesticides. FLAMMABILITY - 0 REACTIVITY - 0 CARCINOGEN POISONOUS GASES ARE PRODUCED IN FIRE DOES NOT BURN Hazard Rating Key: 0=minimal; 1=slight; 2=moderate; 3=serious; Reasons for Citation 4=severe f Arsenic Trisulfide is on the Right to Know Hazardous Substance List because it is cited by OSHA, ACGIH, DOT, f Arsenic Trisulfide can affect you when inhaled and by NIOSH, NTP, DEP, IARC, IRIS, NFPA and EPA. passing through the skin. f This chemical is on the Special Health Hazard Substance f Arsenic Trisulfide is a CARCINOGEN. HANDLE WITH List. EXTREME CAUTION. f Skin contact can cause irritation, burns, rash and loss of pigment f Eye contact can cause irritation and burns. f Inhaling Arsenic Trisulfide can irritate the nose and throat and can cause an ulcer or hole in the “bone” (septum) dividing the inner nose. SEE GLOSSARY ON PAGE 5. f Exposure to Arsenic Trisulfide can cause weakness, poor appetite, headache, and even death. FIRST AID f Arsenic Trisulfide may damage the nervous system and Eye Contact the liver.
    [Show full text]
  • Arsine Phosphine GC/MS Analyzer
    Robust Solution for Routine Monitoring of Arsine and Phosphine in Olefin Production Agilent Arsine Phosphine GC/MS Analyzer Metallocene catalysts used in the polymerization of ethylene (or propylene) to polyethylene (or polypropylene) are preferred for their very high activity but are very sensitive to impurities, even at low levels. Degradation of the catalyst can cause the production process to be shut down earlier than planned in order to replace the deactivated catalyst. To monitor and maximize the lifetime of the catalyst, both Use of innovative technology leads to excellent ethylene/propylene producers and consumers need to monitor analytical performance: impurities at the lowest possible levels, such as low part-per- – Single-digit ppb detection limits for arsine and billion (ppb) concentrations for arsine and phosphine. Detection phosphine in monomer-grade ethylene and of these impurities at low-ppb levels is typically only achievable propylene with a GC/ICP-MS (or GC/ICP-MS/MS), and labs often send – Innovative High Efficiency Source maximizes samples to contract labs for analysis. the number of ions that are transferred into the quadrupole analyzer, for highest sensitivity Measure impurities with confidence, in-house – Patented JetClean Self-Cleaning Ion Source ensures Agilent’s Arsine Phosphine GC/MS analyzer provides long-term stability and high precision, along with a robust solution for routine monitoring of arsine and reducing manual source cleaning frequency phosphine impurities in olefin production at single-digit – Agilent Inert Flow Path solutions ensure better ppb concentrations. Based on 8890 GC and 5977B mass results, and allow you to process more samples spectrometry platforms, each system is factory pre-tested and without unplanned maintenance and recalibration pre-configured to perform sensitive analysis in monomer-grade – Fully automated calibration system ensures ethylene and propylene.
    [Show full text]
  • Safetygram 34: the Toxic Metal Hydrides
    Safetygram #34 The Toxic Metal Hydrides Arsine, Diborane, Germane, Hydrogen Selenide, Phosphine General These products are members of the compound to 17237 kPa). In addition to their extreme toxic- family called metal hydrides. Hydrides are com- ity, these products are also highly flammable. pounds of hydrogen with a more electropositive Toxic metal hydrides are commonly used in the element. Arsine, diborane, germane, hydrogen manufacture of semiconductors, as they are used selenide, and phosphine are members of a subset to deposit the base element into the structures of family called toxic metal hydrides because of their semiconductor circuits to change the properties or significant toxicity. The scope of this Safetygram grow crystals. will be limited to these five products, which are all liquefied compressed gases. Liquefied compressed The highly toxic nature of these products has moti- gases are gases that, when compressed in a con- vated many regulatory and code organizations to tainer, partially liquefy at ordinary temperatures develop strict rules for the storage and use of these and pressures ranging from 25 to 2500 psig (172 products. Because of their hazardous properties, the purchase of these products is controlled. Table 1 Physical and Chemical Properties Property Arsine Diborane Germane Hydrogen Phosphine Selenide Molecular Formula AsH3 B2H6 GeH4 H2Se PH3 Molecular Weight 77.95 27.67 76.62 80.98 34.0 Specific Gravity (air=1) 2.691 0.96 2.66 2.12 1.174 Vapor Pressure @ 70ºF psia 217.9 536.55* 640 137.78 493.2 @ 21.1ºC kPa, abs 1502 3699* 4413 950 3400 Boiling Point ºF -79.9 -134.8 -127.3 -42 -126 ºC -62 -93 -88.5 -41 -88 Specific Volume (scf/lb) 4.91 13.86 5.05 4.8 11.3 (m3/kg) 0.306 0.865 0.315 0.299 0.705 Gas Density (lb/scf) 0.204 0.072 0.2 0.209 0.088 (kg/m3) 3.268 1.153 3.204 3.348 1.41 *vapor pressure is at 60ºF (15.6ºC) Warning: Improper storage, handling, or use of toxic metal hydrides can result in serious injury and/or property damage.
    [Show full text]