DOCSLIB.ORG

Instruction Manual

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Instruction Manual ENGLISH MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL DDX395 (Region 1 – DVD Region Code 1 Area) DDX25BT (Region 1 – DVD Region Code 1 Area) DDX375BT (Region 1 – DVD Region Code 1 Area) DDX418BT (Region 4 – DVD Region Code 4 Area) DDX350BT (Region 1 – DVD Region Code 1 Area) This instruction manual is used to describe the models listed above. Model availability and features (functions) may differ depending on the country and sales area. Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new DVD-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model DDX395/DDX375BT/DDX350BT/DDX25BT/DDX418BT Serial number US Residents Only Register Online Register your Kenwood product at www.kenwood.com/usa/ © 2017 JVC KENWOOD Corporation B5A-2142-10 (KN/RN) 01_DDX_2018ST_KR_COVER.indd 1 9/5/2017 5:25:52 PM Important Notice To ensure proper use, please read through this CAUTIONS For DDX418BT: manual before using this product. It is especially important that you read and observe WARNINGS To care for the unit and CAUTIONS in this manual. • If you have parked the car for a long time in hot or Please keep the manual in a safe and accessible cold weather, wait until the temperature in the car place for future reference. becomes normal before operating the unit. To care for the monitor The marking of products using lasers The label is attached to the chassis/case and says WARNINGS • The monitor built into this unit has been produced with high precision, but it may have some ineffective that the component uses laser beams that have been To prevent accidents and damages dots. This is inevitable and is not considered classified as Class 1. It means that the unit is utilizing • DO NOT install any unit or wire any cable in a defective. laser beams that are of a weaker class. There is no location where; • Do not expose the monitor to direct sunlight. danger of hazardous radiation outside the unit. – it may obstruct the steering wheel and gearshift • Do not operate the touch panel using a ball-point lever operations. pen or similar tool with a sharp tip. For DDX395/DDX375BT/DDX350BT/DDX25BT: – it may obstruct the operation of safety devices such Touch the keys on the touch panel with your finger CAUTION as air bags. directly (if you are wearing a glove, take it off). Use of controls or adjustments or performance – it may obstruct visibility. • When the temperature is very cold or very hot... of procedures other than those specified herein • DO NOT raise the volume level too much, as this will – Chemical changes occur inside, causing may result in hazardous radiation exposure. In make driving dangerous by blocking outside sounds, malfunction. compliance with Federal Regulations, the following and may cause hearing loss. – Pictures may not appear clearly or may move are reproductions of labels on, or inside the product • DO NOT operate the unit while driving. If you need slowly. Pictures may not be synchronized with relating to laser product safety. to operate the unit while driving, be sure to look the sound or picture quality may decline in such around carefully. environments. • Stop the car before performing any complicated On the volume setting operations. • Digital devices produce very little noise compared • The driver must not watch the monitor while driving. with other sources. Lower the volume before playing these digital sources to avoid damaging the speakers Location : Top plate by sudden increase of the output level. i ENGLISH EN_DDX2018ST_KR.indb i 2017/05/17 9:27 Important Notice For DDX395/DDX375BT/DDX350BT/DDX25BT: FCC NOTE For DDX395/DDX375BT/DDX350BT/DDX25BT: CAUTION This equipment has been tested and found to comply IC (Industry Canada) Notice with the limits for a Class B digital device, pursuant This device complies with Industry Canada’s licence- This equipment complies with FCC/IC radiation to Part 15 of the FCC Rules. These limits are designed exempt RSSs. Operation is subject to the following two exposure limits set forth for an uncontrolled to provide reasonable protection against harmful conditions: environment and meets the FCC radio frequency interference in a residential installation. (1) This device may not cause interference; and (RF) Exposure Guidelines and RSS-102 of the IC radio This equipment may cause harmful interference to (2) This device must accept any interference, including frequency (RF) Exposure rules. This equipment has radio communications, if it is not installed and used interference that may cause undesired operation of very low levels of RF energy that is deemed to comply in accordance with the instructions. However, there the device. without maximum permissive exposure evaluation is no guarantee that interference will not occur in a (MPE). But it is desirable that it should be installed and particular installation. If this equipment does cause operated keeping the radiator at least 20 cm or more harmful interference to radio or television reception, away from person’s body. which can be determined by turning the equipment • Contains Transmitter Module off and on, the user is encouraged to try to correct the FCC ID: ZWY8811X interference by one or more of the following measures: • Contains Transmitter Module • Reorient or relocate the receiving antenna. IC: 12033A-8811X • Increase the separation between the equipment and receiver. For DDX395/DDX375BT/DDX350BT/DDX25BT: • Connect the equipment into an outlet on a FCC WARNING circuit different from that to which the receiver is This equipment may generate or use radio connected. frequency energy. Changes or modifications to this • Consult the dealer or an experienced radio/TV equipment may cause harmful interference unless technician for help. the modifications are expressly approved in the instruction manual. The user could lose the authority This transmitter must not be co-located or operated in to operate this equipment if an unauthorized change conjunction with any other antenna or transmitter. or modification is made. ENGLISH ii EN_DDX2018ST_KR.indb ii 2017/05/17 9:27 About this manual Contents The displays and panels shown in this manual are Component Names and Operations ...............3 Using an external component via ADS adapter— examples used to provide clear explanations of the Basic Operations .................................................4 OEM Features ................................................................................33 operations. For this reason, they may be different How to reset your unit .................................................................4 Bluetooth® .........................................................34 from the actual displays or panels. Turning on the power ..................................................................4 Information ......................................................................................34 Turning off the power ..................................................................4 Preparation .......................................................................................34 Illustrations of DDX395 are mainly used for Putting the unit in standby .......................................................4 Connection.......................................................................................34 explanation. Turning off the screen ..................................................................4 Bluetooth mobile phone .........................................................36 Adjusting the volume ...................................................................5 Bluetooth audio player .............................................................38 This manual mainly explains operations using the Attenuating the sound ...............................................................5 KENWOOD Music Mix ............................................................38 buttons on the monitor panel and keys on the Bluetooth settings .......................................................................39 touch panel. For operations using the remote Getting Started ...................................................5 controller, see page 48. Initial settings .....................................................................................5 Settings ..............................................................40 Setting the security function....................................................6 Audio settings ................................................................................40 < > indicates the various screens/menus/ Clock settings .....................................................................................6 Display settings ..............................................................................43 operations/settings that appear on the touch Various Screens and Operations .....................7 Input settings ..................................................................................45 System settings..............................................................................45 panel. Home screen ......................................................................................7 Source control screen ...................................................................8 Remote
Load more

Recommended publications
  • Dnx997xr Dnx697s Dnx577s
    DNX997XR DNX697S DNX577S GPS NAVIGATION SYSTEM INSTRUCTION MANUAL • Updated information (the latest Instruction Manual, system updates, new functions, etc.) is available from <https://www.kenwood.com/cs/ce/>. • The Instruction manual is subject to change for modification of specifications and so forth. Be sure to download the latest edition of the Instruction manual for reference. <http://manual.kenwood.com/edition/im402/> Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new GPS Navigation System. For your records Record the serial number, found on the top of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your KENWOOD dealer for information or service on the product. Model DNX997XR / DNX697S / DNX577S Serial number US Residence Only Register Online Register your KENWOOD product at www.kenwood.com/usa/ © 2020 JVCKENWOOD Corporation IM402_ref_K_En_10 (K) Important Notice on Software JVCKENWOOD Corporation, the original (English) of the license is presented. Ñ Software License on This EULA Product The software embedded in this product Ñ Software License Agreement comprises a number of independent software JVCKENWOOD Corporation (hereinafter called components, each of which is copyrighted by “Licensor”) holds either the copyright to the JVCKENWOOD Corporation or by a third party. embedded software or the right to sublicense it. This product uses software components that This agreement establishes the conditions under are based on an End-User License Agreement which the customer uses this “Licensed Software.” (hereinafter called “EULA”) stipulated by The customer shall agree to the terms of this JVCKENWOOD Corporation and by third parties.
    [Show full text]
  • Electronics System Coordinator
    Electronics System Coordinator RYOSAN CO., LTD. CORPORATE PROFILE 2020 Since its founding, Ryosan has conducted corporate activities based on the strong conviction that “a corporation is a public institution.” This phrase means that corporations are founded in order to benefit society in both the present and the future. Corporations are allowed to exist only if they are needed by society. In other words, corporations lose their meaning when they are no longer needed by society. Ryosan will continue its corporate activities with this strong conviction and firm resolution. “A corporation is a public institution.” Ryosan keeps this phrase firmly in its heart as the Company moves forward into the future. Ryosan History ~1960 1970 1980 1990 2000 2010~ 1953 1974 1981 1996 2000 2012 Ryosan Denki Co., Ltd. is established Hong Kong Ryosan Limited is The company name is changed to Ryosan Technologies USA Inc. The head office is moved to the current Ryosan Europe GmbH is established. in Kanda-Suehirocho, Chiyoda-ku, established. Ryosan Co., Ltd. is established. Head Office Building. Tokyo. Consolidated net sales exceed 300 2014 1976 1982 1997 billion yen. Ryosan India Pvt. Ltd. is established. 1957 Singapore Ryosan Private Limited Consolidated net sales exceed Zhong Ling International Trading The Company is reorganized as is established. 100 billion yen. (Shanghai) Co.,Ltd. is established. 2001 2016 a stock company as Korea Ryosan Corporation and Ryosan Engineering Headquarters obtain Ryosan Denki Co., Ltd. 1979 1983 1999 (Thailand) Co.,Ltd. are established. ISO9001 certification. Ryotai Corporation is established. Stock is listed on the Second Section Kawasaki Comprehensive Business 1963 of the Tokyo Stock Exchange.
    [Show full text]
  • Influencer Video Advertising in Tiktok
    MIT INITIATIVE ON THE DIGITAL ECONOMY 2021, VOL.4 INFLUENCER VIDEO ADVERTISING IN TIKTOK By Jeremy Yang, Juanjuan Zhang, Yuhan Zhang IN THIS BRIEF ik Tok is among the major online platforms blurring the line Tbetween content and commerce. Some creators of TikTok Influencer videos on the TikTok online videos, known as influencers, simultaneously entertain their platform have emerged as a major, multibillion- audiences and sell them products. dollar force in marketing. We explore what differentiates influencer videos that drive many Our research team studied the difference between TikTok sales from those that drive only a few. influencer video ads that drive many sales and ones that drive fewer sales. We also studied whether it’s possible to predict We develop an algorithm that can be used to which TikTok influencer video ads will drive more or fewer sales. predict the sales lift of TikTok influencer videos. This algorithm uses a Convolutional Neural To answer these and other related questions, we developed an Network to quantify the extent to which the algorithm that predicts TikTok influence video sales lift using a product is advertised in the most engaging new metric that we call motion score, or m-score, for short. This parts of the video, creating what we call a statistic is based on an algorithm that quantifies the extent to motion score, or m-score for short. which the product is advertised in the most engaging parts of the video. Videos with higher m-scores lift more sales, especially for products that are bought on We conclude that a one standard deviation increase in a TikTok impulse, are hedonic, or inexpensive.
    [Show full text]
  • Notes to Consolidated Financial Statements
    - 15 - Notes to consolidated financial statements: 1. The company's consolidated financial statements are prepared in conformity with U.S. generally accepted accounting principles (U.S. GAAP). 2. In order to be consistent with generally accepted financial reporting practices in Japan, operating profit is presented as net sales less cost of sales and selling, general and administrative expenses. The company believes that this is useful to investors in comparing the company's financial results with those of other Japanese companies. Please refer to the accompanying consolidated statement of income and Note 5 for U.S. GAAP reconciliation. 3. The company changed the measurement date to March 31 for those postretirement benefit plans with a December 31 measurement date in conformity with the provisions regarding the change in the measurement date of postretirement benefit plan of SFAS No. 158, “Employers’ Accounting for Defined Benefit Pension and Other Postretirement Plans – an amendment of FASB Statement No. 87, 88, 106, and 132(R).” With the change in the measurement date, beginning fiscal 2009 balance of “retained earnings” and pension liability adjustments of “accumulated other comprehensive income (loss)” has been reduced by 3,727 million yen and 73,571 million yen, respectively. 4. Comprehensive income was reported as a gain of 122,745 million yen for the six months ended September 30, 2008. Comprehensive income includes net income and increases (decreases) in accumulated other comprehensive income (loss) for this period. 5. Under U.S. GAAP, expenses associated with the implementation of early retirement programs at certain domestic and overseas companies are included as part of operating profit in the statement of income.
    [Show full text]
  • Published on 7 October 2016 1. Constituents Change the Result Of
    The result of periodic review and component stocks of TOPIX Composite 1500(effective 31 October 2016) Published on 7 October 2016 1. Constituents Change Addition( 70 ) Deletion( 60 ) Code Issue Code Issue 1810 MATSUI CONSTRUCTION CO.,LTD. 1868 Mitsui Home Co.,Ltd. 1972 SANKO METAL INDUSTRIAL CO.,LTD. 2196 ESCRIT INC. 2117 Nissin Sugar Co.,Ltd. 2198 IKK Inc. 2124 JAC Recruitment Co.,Ltd. 2418 TSUKADA GLOBAL HOLDINGS Inc. 2170 Link and Motivation Inc. 3079 DVx Inc. 2337 Ichigo Inc. 3093 Treasure Factory Co.,LTD. 2359 CORE CORPORATION 3194 KIRINDO HOLDINGS CO.,LTD. 2429 WORLD HOLDINGS CO.,LTD. 3205 DAIDOH LIMITED 2462 J-COM Holdings Co.,Ltd. 3667 enish,inc. 2485 TEAR Corporation 3834 ASAHI Net,Inc. 2492 Infomart Corporation 3946 TOMOKU CO.,LTD. 2915 KENKO Mayonnaise Co.,Ltd. 4221 Okura Industrial Co.,Ltd. 3179 Syuppin Co.,Ltd. 4238 Miraial Co.,Ltd. 3193 Torikizoku co.,ltd. 4331 TAKE AND GIVE. NEEDS Co.,Ltd. 3196 HOTLAND Co.,Ltd. 4406 New Japan Chemical Co.,Ltd. 3199 Watahan & Co.,Ltd. 4538 Fuso Pharmaceutical Industries,Ltd. 3244 Samty Co.,Ltd. 4550 Nissui Pharmaceutical Co.,Ltd. 3250 A.D.Works Co.,Ltd. 4636 T&K TOKA CO.,LTD. 3543 KOMEDA Holdings Co.,Ltd. 4651 SANIX INCORPORATED 3636 Mitsubishi Research Institute,Inc. 4809 Paraca Inc. 3654 HITO-Communications,Inc. 5204 ISHIZUKA GLASS CO.,LTD. 3666 TECNOS JAPAN INCORPORATED 5998 Advanex Inc. 3678 MEDIA DO Co.,Ltd. 6203 Howa Machinery,Ltd. 3688 VOYAGE GROUP,INC. 6319 SNT CORPORATION 3694 OPTiM CORPORATION 6362 Ishii Iron Works Co.,Ltd. 3724 VeriServe Corporation 6373 DAIDO KOGYO CO.,LTD. 3765 GungHo Online Entertainment,Inc.
    [Show full text]
  • Security Risks and Recommendations for Audio-Centric
    Mind Your Voice: Security Risks and Recommendations for Audio-centric Social Media Platforms Technical Brief With an estimated growth rate of about half-million users per day, or 6 million users per month,1 ClubHouse is probably the most popular audio-only social network at the moment, albeit not the only one: Riffr,2 Listen,3 Audlist,4 and HearMeOut5 are some of the alternatives, while we've been waiting for the upcoming Twitter Spaces.6 There’s also Discord,7 which we didn't consider in our analysis because, despite having audio features, it's not centered around audio. This technical brief aims to provide users, app creators, and social network service providers practical security recommendations about the security risks brought forth by audio-only social networks. In parallel and independent from the research8 published by the Stanford Internet Observatory (SIO), we analyzed the apps (primarily ClubHouse but also including Riffr, Listen, Audlist, and HearMeOut). Among other attacks, we also found that, under some circumstances, an attacker can passively collect sensitive information about ongoing conversations, even "locked" ones; including participants, their identifiers, names, photos, and so on, without the need to join that room. This poses a clear privacy risk. Some security risks that we highlight here are unique to the ephemeral nature of audio-only social networks, while some are shared with other modern social network platforms (audio-centered or not). This research has been conducted in February 8-11 of this year. At the time of publication, some of the issues described in this document might have been or are currently being fixed by the app vendors.
    [Show full text]
  • Vr-9070 Instruction Manual Kenwood Corporation
    AUDIO VIDEO SURROUND RECEIVER VR-9070 INSTRUCTION MANUAL KENWOOD CORPORATION About the supplied remote control Compared to standard remote controls, the remote control supplied with this receiver has several operation modes. These modes enable the remote control to control other audio/video components. In order to effectively use the remote control, it is important to read the operating instructions and obtain a proper understanding of the remote control and how to switch its operation modes (etc.). Using the remote control without completely understanding its design and how to switch the operation modes may result in incorrect operations. For the U.S.A. Register Online Register your Kenwood Home Audio product at www.kenwoodusa.com Plus opt in to receive e-mail updates and other offers when you register at our web site. B60-5553-00 00 CS (K, P) 0412 *5553/01-09/EN 1 05.2.8, 0:46 PM Caution : Read this page carefully to ensure safe Before applying the power operation. Units are designed for operation as follows. For the U.S.A. U.S.A. and Canada ........................................... AC 120 V only FCC WARNING Australia ........................................................... AC 240 V only This equipment may generate or use radio frequency energy. Europe ............................................................... AC 230 V only Changes or modifications to this equipment may cause harmful Other countries ............ AC 110-120 / 220-240 V switchable interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. NOTE: Safety precautions This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
    [Show full text]
  • Vrs-7100 Instruction Manual Kenwood Corporation
    AUDIO VIDEO SURROUND RECEIVER VRS-7100 INSTRUCTION MANUAL KENWOOD CORPORATION Quick Start Reference Please read the following pages so that you can enjoy the surround sound at the best condition. (These pages give shortcut explanations on how to connect the speaker system to the receiver, set up the speakers and play a source.) "Let's play DVD video software" )¡, ™£ About the supplied remote control Compared to standard remote controls, the remote control supplied with this receiver has several operation modes. These modes enable the remote control to control other audio/video components. In order to effectively use the remote control it is important to read the operating instructions and obtain a proper understanding of the remote control and how to switch its operation modes (etc.). Using the remote control without completely understanding its design and how to switch the operation modes may result in incorrect operations. B60-5462-10 02 MA ( K, P, E, X ) 0312 Before applying power Caution : Read this page carefully to ensure safe operation. Units are designed for operation as follows. U.S.A. and Canada ........................................... AC 120 V only Europe ............................................................... AC 230 V only Australia ........................................................... AC 240 V only Safety precautions WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO CAUTION NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE RISK OF ELECTRIC SHOCK DO NOT OPEN PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” WITHIN THE PROD- UCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
    [Show full text]
  • Proposal of a Data Processing Guideline for Realizing Automatic Measurement Process with General Geometrical Tolerances and Contactless Laser Scanning
    Proposal of a data processing guideline for realizing automatic measurement process with general geometrical tolerances and contactless laser scanning 2018/4/4 Atsuto Soma Hiromasa Suzuki Toshiaki Takahashi Copyright (c)2014, Japan Electronics and Information Technology Industries Association, All rights reserved. 1 Contents • Introduction of the Project • Problem Statements • Proposed Solution – Proposal of New General Geometric Tolerance (GGT) – Data Processing Guidelines for point cloud • Next Steps Copyright (c)2014, Japan Electronics and Information Technology Industries Association, All rights reserved. 2 Contents • Introduction of the Project • Problem Statements • Proposed Solution – Proposal of New General Geometric Tolerance (GGT) – Data Processing Guidelines for Point Cloud • Next Steps Copyright (c)2014, Japan Electronics and Information Technology Industries Association, All rights reserved. 3 Introduction of JEITA What is JEITA? The objective of the Japan Electronics and Information Technology Industries Association (JEITA) is to promote healthy manufacturing, international trade and consumption of electronics products and components in order to contribute to the overall development of the electronics and information technology (IT) industries, and thereby to promote further Japan's economic development and cultural prosperity. JEITA’s Policy and Strategy Board > Number of full members: 279> Number of associate members: 117(as of May 13, 2014) - Director companies and chair/subchair companies - Policy director companies (alphabetical) Fujitsu Limited (chairman Masami Yamamoto) Asahi Glass Co., Ltd. Nichicon Corporation Sharp Corporation Azbil Corporation IBM Japan, Ltd. Hitachi, Ltd. Advantest Corporation Nippon Chemi-Con Corporation Panasonic Corporation Ikegami Tsushinki Co., Ltd. Japan Aviation Electronics Industry, Ltd. SMK Corporation Mitsubishi Electric Corporation Nihon Kohden Corporation Omron Corporation NEC Corporation JRC Nihon Musen Kyocera Corporation Sony Corporation Hitachi Metals, Ltd KOA Corporation Fuji Xerox Co., Ltd.
    [Show full text]
  • Dv-502 Dvf-3050 Instruction Manual
    DVD / VCD / CD PLAYER DV-502 DVF-3050 INSTRUCTION MANUAL KENWOOD CORPORATION COMPACT DIGITAL VIDEO B60-5075-18 01 (K/P/T/M/Y) OC 01/03 2 Introduction DV-502/DVF-3050 (EN/K,P,T,M,Y) Before applying power Caution : Read this page carefully to ensure safe operation. Units are designed for operation as follows. U.S.A. and Canada ....................................................... AC 120V only Europe and U.K. ............................................................ AC 230V only Australia ....................................................................... AC 240 V only *Other countries .................... AC 110-120 / 220-240 V switchable For the United Kingdom Factory fitted moulded mains plug 1. The mains plug contains a fuse. For replacement, use only a 3-Amp ASTA-approved (BS 1362) fuse. 2. The fuse cover must be refitted when replacing the fuse in the moulded plug. 3. Do not cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach. Preparations A power point, then obtain an appropriate safety approved extension lead or adapter, or consult your dealer. If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent. Connection to the mains supply. IMPORTANT : The wires in the mains lead are coloured in accordance with the following code: Blue : Neutral Brown : Live Do not connect those leads to the earth terminal of a three-pin plug. Safety precautions Caution : Read this page carefully to ensure safe operation. WARNING :TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
    [Show full text]
  • SNAPCHAT for NONPROFITS Using Snapchat to Drive Social Change
    SNAPCHAT FOR NONPROFITS Using Snapchat to Drive Social Change. Snapchat has close to 178 million daily active users, who use the app on an average of more than 25 times per day. Snapchat is a mobile social media app that allows users to send short-lived photos and brief videos, called “Snaps,” to followers. It is an extremely visual and highly customizable platform that can turn small moments into a shareable story. Why Use Snapchat? Snapchat is ideal for organizations Connecting With looking to target younger audiences with If you have a lot of visual content you 85 percent of daily users aged 18 - 34. Your Audience would like to share, or if you frequently Once that you decide Snapchat is a good In fact, Snapchat is so popular with engage with your audience at in-person fit for your organization’s digital strategy young adults that 70 percent of 18- to events, Snapchat may be a good fit for and create an account, you can start 24-year-olds in the U.S. are already on the your organization. When considering any following users and begin to develop an platform. new social network, you need to determine audience of your own. if the platform will serve your strategic Individuals aren’t the only ones using You can drive followers to your new goals. Start by asking: Who are your target the app – more brands, businesses and Snapchat account by promoting it on your audiences, where can they be found and public figures use Snapchat than ever. other platforms. Posting exclusive content what do you want them to do? Nonprofits also are finding effective on Snapchat about contests or giveaways ways to use Snapchat.
    [Show full text]
  • Kenwood DMX4707S Owner's Manual
    DMX4707S DMX47S DMX5020S MONITOR WITH RECEIVER INSTRUCTION MANUAL • Updated information (the latest Instruction Manual, system updates, new functions, etc.) is available from <https://www.kenwood.com/cs/ce/>. Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your KENWOOD dealer for information or service on the product. Model DMX4707S / DMX47S / DMX5020S Serial number US Residence Only Register Online Register your KENWOOD product at www.kenwood.com/usa/ © 2020 JVCKENWOOD Corporation B5H-0358-00 EN (K/R) !B5H-0358-20_DMX_KR_En.indb 1 2020/04/20 8:11 Contents Before Use 4 Radio 18 Precautions ................................................................... 4 Radio Basic Operation ............................................18 How to read this manual ......................................... 4 Memory Operation ..................................................19 Selecting Operation ................................................19 Basic Operations 5 Traffic Information ...................................................20 Radio Setup ................................................................20 Functions of the Buttons on the Front Panel ... 5 Turning on the Unit ..................................................
    [Show full text]