DOCSLIB.ORG

Cut-Off Saw Cut-Off (Abrasive) Saw the Rules and Procedures in Force Where People Are at Work 1

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Cut-Off Saw Cut-Off (Abrasive) Saw the Rules and Procedures in Force Where People Are at Work 1 0210 Safety Guidance 2 STROKE PETROL v:032017 Redistributed under licence from HAE by Power Tool Rentals Ltd. Licence expires on 30/06/2017 Using the Cut-off Saw Cut-off (Abrasive) Saw The rules and procedures in force where people are at work 1. Wear protective equipment including goggles and dust mask. may require the person responsible for this equipment to 2. Check that the cutting wheel is fitted securely, and that the guard is properly adjusted. carry out a specific risk assessment. 3. Always hold the machine securely with, both hands: left hand on the front handle, right hand on the rear. It is important to read all of this leaflet 4. Be prepared for the reactive force when the wheel contacts the surface to be cut: the BEFORE you use the Cut-off Saw machine will pull away from you, or pull up a vertical surface. 1. Plan your work and think ahead to make sure you will always 5. Use full throttle: make sure the wheel is running at full speed before lowering it carefully be working safely. onto the surface. 2. Petrol mixture is highly flammable. Take care not to cause a fire or explosion. 6. If the machine starts to labour and slow down do not force it so hard. Do not overload the machine. Long shallows cuts keeping the wheel speed up are more effective than 3. This cut-off saw is designed to cut concrete, masonry, asphalt, aggressive pressure. steel, cast iron and similar materials using the appropriate abrasive or diamond wheel. Do not use it for anything else. 7. When you come towards the end of the cut, release some of the pressure on the machine Carelessness or misuse could cause a serious or fatal accident. and be prepared for it to come free from the material. 4. This machine will damage property if it is not used carefully. Practice on some scrap 8. The machine can only cut in straight lines. Do not try to go round corners. material if you have not used it before. 9. Only use the machine up to shoulder height. Arrange a suitable working platform if you 5. Make sure that there are no hidden electricity cables, gas or water pipes where the cut is to need to cut higher than this. be made. Consider using a cable and/or pipe detector, ask the hire company for suitable types available. Ask the hire company for HAE leaflet no.1415 – cable location and 10. Watch out for signs that vibration from the work may be affecting your hands. If fingers start signal generator. to tingle or feel numb, take a short break from cutting work. Exercise fingers to encourage 6. The following items of personal protective equipment must be worn: goggles; dust mask- a blood circulation. Find out more about vibration. Ask the hire company for a copy of the minimum of FFP3 protection; ear muffs or plugs giving protection to reduce exposure to HAE leaflet no. 2150 – Hand-arm vibration or visit www.hse.gov.uk/vibration 87dB(A) at the ear; Safety boots; industrial gloves. 11. To help prevent vibration affecting hands, operate the machine for shorter periods. Keep 7. A personal first-aid kit should be available. hands warm – wearing gloves may help do this. 8. This machine must not be used by young persons, or by anyone under the influence of drugs 12. Stop the engine if leaving the machine unattended. or alcohol. 13. If the cut-off saw does not work properly do not attempt to repair it. Contact the hire 9. This machine is designed for operation by an able bodied adult. Anyone with either temporary company. or permanent disability must seek expert advice before using it. 14. You may want to read this leaflet again. Please keep it safely until you have finished work. 10.Although most cut-off saws are designed for one person operation you should always be careful not to lift beyond your own capabilities. 7 1 0 2 3 0 : v HHire Association Europe Telephone: 44 (0) 121 380 4600 Every effort has been made by HAE/EHA to ensure that the information given in this document and supporting material 2450 Regents Court Fax: 44 (0) 121 333 4109 is accurate and not misleading. HAE/EHA cannot accept responsibility for any loss or liability perceived The Crescent Email: [email protected] to have arisen from the use of any such document/material. Only Acts of Parliament and Statutory Instruments Birmingham Business Park website: www.hae.org.uk have the force of law and only the courts can authoritatively interpret the law. Solihull B37 7YE Solihull B37 7YE B37 Solihull website: www.hae.org.uk website: Birmingham Business Park Business Birmingham ©Copyright Hire Association Europe April 2011 April Europe Association Hire ©Copyright © Email: [email protected] Email: The Crescent The ax: 44 (0) 121 333 4109 333 121 (0) 44 ax: F 2450 Regents Court Regents 2450 n nuhrsdrpouto aulyo eetoial sSRCL prohibited STRICTLY is – electronically or manually – reproduction unauthorised Any lcrncly–i TITYprohibited STRICTLY is – electronically elephone: 44 (0) 121 380 4600 380 121 (0) 44 elephone: T Hire Association Europe Europe Association Hire onwards, given in the section starting from cold. from starting section the in given onwards, the controls before trying to start it. start to trying before controls the not use the cut-off saw. Contact the hire company. hire the Contact saw. cut-off the use not can to a cool, safe place. safe cool, a to can and guards. If anything is found to be damaged, do damaged, be to found is anything If guards. and 11. Put all fuel caps back on properly, and move the fuel the move and properly, on back caps fuel all Put found on most cut-off saws. Check the saw to find to saw the Check saws. cut-off most on found 4. Follow the rest of the instructions from instruction 5 instruction from instructions the of rest the Follow 1. Check your machine, including the engine, fuel tank fuel engine, the including machine, your Check 1. This section describes the controls and symbols and controls the describes section This straight away. straight 3. Set the choke lever to the off position. off the to lever choke the Set CUT-OFF SAW CUT-OFF CONTROLS 10. If any fuel is spilt on your clothes, change them change clothes, your on spilt is fuel any If the throttle is now in position ready to start. to ready position in now is throttle the it up or cover it with soil. with it cover or up it wear identical personal protective equipment. protective personal identical wear 2. 2. Now release the throttle, control lever and interlock: and lever control throttle, the release Now Before starting the machine, know how to stop it. stop to how know machine, the starting Before 9. If small amounts of fuel are spilt on the ground, wipe ground, the on spilt are fuel of amounts small If 6. Anybody who is working close by will also need to need also will by close working is who Anybody lever back to the starting position. starting the to back lever 11. Make sure that you understand all of the controls. the of all understand you that sure Make soaked cloth carefully. cloth soaked vibration or visit www.hse.gov.uk/vibration visit or vibration Whilst keeping these pressed in, pull the control the pull in, pressed these keeping Whilst containing asbestos. containing 8. Wipe any fuel off the machine. Dispose of fuel of Dispose machine. the off fuel any Wipe copy of the HAE leaflet no. 2150 – Hand-arm – 2150 no. leaflet HAE the of copy 1. Press the interlock and the throttle at the same time. same the at throttle the and interlock the Press 10. Do not use this machine to cut asbestos or materials or asbestos cut to machine this use not Do Ask the hire company for a for company hire the Ask effects of vibration - - vibration of effects yourself or the machine. the or yourself STARTING WHEN WARM WHEN STARTING and signal generator. signal and hands warm while working. Find out more about the about more out Find working. while warm hands 7. Use a funnel when refuelling. Do not spill any fuel on fuel any spill not Do refuelling. when funnel a Use starting work. starting company for HAE leaflet no.1415 – cable location cable – no.1415 leaflet HAE for company work, and wear industrial quality gloves to keep to gloves quality industrial wear and work, 6. Shake the fuel can to mix the petrol and oil. and petrol the mix to can fuel the Shake warm up by gently opening the throttle, before throttle, the opening gently by up warm company for suitable types available. Ask the hire the Ask available. types suitable for company hazardous. Warm hands up before commencing before up hands Warm hazardous. dirt falling into the fuel tank. fuel the into falling dirt 12. 12. In cold weather, you may need to let the engine the let to need may you weather, cold In using a cable and/or pipe detector, ask the hire the ask detector, pipe and/or cable a using 5. Vibration from using this machine can be can machine this using from Vibration 5. Clean the filter cap and the area around it to prevent to it around area the and cap filter the Clean or water pipes where the cut is to be made.
Load more

Recommended publications
  • Pipe Cutting Machines
    PIPE CUTTING MACHINES YOUR PARTNER IN SUCCESS THROUGH INNOVATION Overview Vernon’s Commitment to Pipe Fabrication Table of Contents Pipe cutting technology has advanced rapidly Investment in design engineering, advanced Performance Engineered Products . .4-5 since the days of hand-held torches and technology, and experienced staff constitute Common Applications . .6-7 wraparound paper templates. A single cutting Vernon’s commitment to the fabrication market. machine can now supply enough pipe to satisfy Alignment of interests and continuous exchange Machine Configuration . .8-9 5 to 10 fit-up and welding stations. of information between Vernon and its Pipe Handling Equipment . .10-11 Knowledgeable business owners recognize that customers have forged relationships that have Turning Roll & Conveyor Assembly . .10 a centralized, efficient cutting operation governs existed for more than forty years. Loyalty and Entrance Conveyor . .11 all downstream operations. Speed, safety, and respect have bred a common goal of improving Discharge Conveyor . .11 quality have become the benchmarks of productivity and fostering innovation. Mechanized Cutting Assemblies . .12-13 profitable pipe fabrication, the same qualities While many of the basic cutting and material that describe Vernon pipe cutting machines. handling concepts are still valid today, Vernon Two-Torch Straight Cut-off Assembly . .12 In 1948, Vernon Tool Company acquired the continues to incorporate the newest technology Mechanical Pantograph Assembly . .13 rights to manufacture the Douglas cutting in its machines. Innovations like machine- Computerized Profiling Assemblies . .13 machine, a simple mechanical pantograph for mounted microprocessors, programmable logic Multi-Axes Controls . .14 burning straight cuts, simple miters and saddles. controls, and network-compatible operating Optional Accessories .
    [Show full text]
  • 866-Evo-Tool
    ® ® 866-EVO-TOOL Evolution Industrial Full Range Catalog DOWNLOAD A FREE QR READER APP & SCAN THE QR CODE! Instantly watch all our HD Videos on your Smart Phone. Make sure the HD setting is turned on. If you don’t have a Smart Phone, you can also watch all the videos online at www.evolutionsteel.com. ® Company Profile Evolution is a leader in the steel and fabrication industry, offering industrial metal cutting products, metal drilling products and related accessories. With a strong focus on customer service and determination to achieve unmatched quality, Evolution offers the highest product value to a rapidly growing and changing market. Evolution's United States headquarters is based out of Davenport, Iowa, allowing centralized distribution for the entire North American customer base. Worldwide locations offer distribution in Europe, CONTENTS Asia, South America, Australia and Africa. “Innovation Defined” is the company motto and Evolution achieves this by continuously improving existing products and adding new Metal Cutting products to effectively complement Evolution’s current portfolio. EVOSAW185 - 7-1/4” Chop Saw ...........4 Quality Assurance & Warranty EVOSAW380 - 14” Chop Saw . .5 EVOSAW180HD - 7-1/4" Circular Saw . 6 All Evolution power tools are put through quality assurance EVOSAW230 - 9” Circular Saw . 7 testing and are guaranteed to be free of defects in workmanship Industrial Saw Blade Range . 8 or materials for three years from the date of purchase. Refer to Evolution's instruction manuals for full details. Industrial Magnetic Drilling All warranty claims must be submitted by the owner/user of the product and can only be evaluated and authorized by Evolution's EVOMAG28 - 1-1/8" x 2" Magnetic Drill .
    [Show full text]
  • Best Practices for Cut-Off Saw Maintenance
    Best Practices for Cut-Off Saw Maintenance Fill your saw with fresh, quality fuel with Inspect saw for cracks in the blade little to no ethanol (non-oxygenated guard and belt guard, missing feet, gas/89 octane or higher). This will and working guard stops before improve saw performance and extend running. Inspect saw for loose nuts useful life. and bolts before running. Use of 2 cycle synthetic oil will help Inspect diamond blade for cracks in prolong the life of the saw. Synthetic segments and gullets. Inspect abrasive oils have better purity and stability so blade for fraying or warpage. Inspect they outperform conventional oils. flange for excessive wear, sharp edges You get what you pay for. and missing tabs. Replace both blade and flange if necessary before running. Run your saw out of fuel before storing Do not run wide open throttle for more for the winter. Always use fresh, properly than 10 seconds while not under load. mixed fuel in the spring. Clean saw after every use to avoid build Use saw blade (wheel) with correct arbor up of dust when dry cutting or slurry for safety and best performance. when wet cutting. Replace your air filter only when your Use water when cutting concrete/asphalt saw starts to lose power in the cut. to avoid silica exposure which can cause silicosis, a serious lung disease. Early replacement or blowing out or Call Esch for cutting equipment, diamond cleaning the filter can damage pistons/ and abrasive saw blades, cut-off saw cylinders because of dirt ingestion. parts and service, and expert advice.
    [Show full text]
  • United States Patent (10) Patent N0.: US 6,945,850 B2 Perrey (45) Date of Patent: Sep
    US006945850B2 (12) United States Patent (10) Patent N0.: US 6,945,850 B2 Perrey (45) Date of Patent: Sep. 20, 2005 (54) SAW BLADE WITH ABRASIVE SURFACE 3,914,906 A * 10/1975 Barnes ...................... .. 30/514 4,369,685 A * 1/1983 Trigg ...... .. 76/112 Inventor: DavidCL Jefferson AI Perrey, City MO (Us)Brush Creek 4,675,975 A * 6/1987 Kucharczyk. .et . a1.. ........ .. .. 29/566 651’09_8832 ’ 5,018,276 A * 5/1991 Asada ....................... .. 30/347 5,115,796 A 5/1992 Schweickhardt ....... .. 125/13.01 . _ . 5,239,978 A * 8/1993 Plangetis ........ .. 125/16.01 (ak) Nome‘ sublecbto any dlsclalmer: the term Ofthls 5,518,443 A * 5/1996 Fisher ................. .. 125/15 Patent 15 extended or adlusted under 35 5,529,528 A 6/1996 Young 6161. .. 451/28 U-S-C- 154(b) by 181 days~ 5,704,828 A * 1/1998 Young et a1. 451/461 5,868,125 A * 2/1999 Maoujoud .... .. 125/15 (21) Appl, No_; 09/777,333 6,039,641 A * 3/2000 suug ......................... .. 125/22 (22) Filed: Feb 6, 2001 FOREIGN PATENT DOCUMENTS (65) Prior Publication Data GB 2195099 A * 3/1988 ......... .. B24B/21/00 US 2002/0106983 A1 Aug. 8, 2002 * Cited by examiner (51) Int. c1.7 .......................... .. B23F 21/03- B28D 1/02 Primary Ex“mi””—DaVid 13' Thomas (52) US. Cl. ................. .. 451/28- 125/1301- 125/1601- (74) Attorney’ Agent’ 0’ Fi””_Lathr°p 8‘ Gage LC 125/21; 83/835; 451/540 (57) ABSTRACT (58) Fleld 0f 41561é2i’7g6’2g; The present invention relates to a saW blade for cutting and 540 ’541 ’548_’ 125/’12 1’3 01 ’15 i6 01’ ?nishing the surface of a Work piece.
    [Show full text]
  • Investigation of Abrasive Saw Kickback
    Investigation of abrasive saw kickback The MIT Faculty has made this article openly available. Please share how this access benefits you. Your story matters. Citation Burcat, Steven et al. "Investigation of abrasive saw kickback." International Journal of Occupational Safety and Ergonomics (July 2020): dx.doi.org/10.1080/10803548.2020.1770529 © 2020 Central Institute for Labour Protection–National Research Institute (CIOP- PIB) As Published http://dx.doi.org/10.1080/10803548.2020.1770529 Publisher Informa UK Limited Version Author's final manuscript Citable link https://hdl.handle.net/1721.1/128200 Terms of Use Creative Commons Attribution-Noncommercial-Share Alike Detailed Terms http://creativecommons.org/licenses/by-nc-sa/4.0/ Investigation of Abrasive Saw Kickback Steven Burcata, Brian Yuea, Alexander Slocuma & Tal Cohena,b,* aDepartment of Mechanical Engineering, Massachusetts Institute of Technology, USA; bDepartment of Civil and Environmental Engineering, Massachusetts Institute of Technology, USA 1 Abstract 2 Saw kickback can cause fatal injuries, but only woodcutting saws have 3 regulations and assessment methodologies for kickback. These regulations 4 do not apply to abrasive cutting saws, as their cutting mechanism and 5 dominant kickback mode differ from those of woodcutting saws. This work 6 combines theoretical and experimental tools to investigate abrasive saw 7 kickback. A theoretical model based on frictional engagement during a 8 pinch-based kickback event is shown to predict resultant kickback energy in 9 good agreement with experimental measurements. These measurements 10 were obtained using a specialized machine that generates pinch-based 11 kickback events and measures resultant kickback energy. Upon validating 12 the model, two representative saws, a circular cutoff saw and a chainsaw, 13 were tested using the prototype machine to evaluate their comparative 14 kickback risk.
    [Show full text]
  • Tube and Pipe Cutting Techniques; Advantages and Limitations Abrasive to Shear, Each Method Has Its Place
    TPJ ‐ The Tube & Pipe Journal® Tube and pipe cutting techniques; advantages and limitations Abrasive to shear, each method has its place By Leonard Eaton, Contributing Writer January 24, 2002 Many factors are involved in choosing a particular method or technology for cutting tube or pipe. Many factors are involved in choosing a particular method or technology for cutting tube or pipe. The basic factors that affect the cut are the tube or pipe material, wall thickness, squareness of ends, end‐conditioning requirements, and secondary process requirements. Other factors that play a role include production volume, cutting efficiency, overhead costs, and special requirements of the tube or pipe material. Abrasive Cutting Abrasive sawing is a basic, manual method of cutting‐to‐length product to the customer's specification in any alloy. An abrasive saw operates with a circular abrasive blade or resin‐ composition wheel—either wet or dry—that grinds through the product. Cut size capabilities depend on the machine. Some abrasive cutting machines can handle a solid round up to 4 in. outside diameter (OD). This general‐purpose method is useful for hand‐loading applications and small product runs that do not require critical end conditions. While an abrasive saw is easy to use and requires little or no setup time, it cannot provide a square cut or tight tolerances. Because the process uses a cutting or burning action, it is not efficient for thick‐walled material. It also might leave a heat‐affected zone (HAZ) that can affect secondary processing. While abrasive sawing is inexpensive and quick, it produces significant kerf and a heavy burr that might have to be removed by deburring.
    [Show full text]
  • 866-Evo-Tool
    ® ® 866-EVO-TOOL Evolution Professional Full Range Catalog DOWNLOAD A FREE QR READER APP & SCAN THE QR CODE! Instantly watch all our HD Videos on your Smart Phone. Make sure the HD setting is turned on. If you don’t have a Smart Phone, you can also watch all the videos online at www.evolutionbuild.com. ® Company Profile Evolution is a leader in the steel and fabrication industry, offering industrial metal cutting products, metal drilling products and related accessories. With a strong focus on customer service and determination to achieve unmatched quality, Evolution offers the highest product value to a rapidly growing and changing market. Evolution's United States headquarters is based out of Davenport, Iowa, allowing centralized distribution for the entire North American customer base. Worldwide locations offer distribution in Europe, Asia, South America, Australia and Africa. CONTENTS “Innovation Defined” is the company motto and Evolution achieves this by continuously improving existing products and adding new products to effectively complement Evolution’s current portfolio. Multipurpose Cutting Quality Assurance & Warranty RAGEB - 7-1/4” Circular Saw .............3 RAGE2 - 14” Chop Saw....................4 All Evolution power tools are put through quality assurance RAGE4 - 7-1/4” Chop Saw...............5 testing and are guaranteed to be free of defects in workmanship RAGE3 - 10” Miter Saw . 6 or materials for three years from the date of purchase. RAGE3-DB - 10” Double Bevel Miter Saw...7 Refer to Evolution's instruction manuals for full details. Our Blade Range .................... 8-9 All warranty claims must be submitted by the owner/user of the 12" Electric Disc Cutter .................10 product and can only be evaluated and authorized by Evolution's Service Department.
    [Show full text]
  • A Sheffield Hallam University Thesis
    Development of an expert system for cutting-off process selection. CHOW, K. L. Available from the Sheffield Hallam University Research Archive (SHURA) at: http://shura.shu.ac.uk/19464/ A Sheffield Hallam University thesis This thesis is protected by copyright which belongs to the author. The content must not be changed in any way or sold commercially in any format or medium without the formal permission of the author. When referring to this work, full bibliographic details including the author, title, awarding institution and date of the thesis must be given. Please visit http://shura.shu.ac.uk/19464/ and http://shura.shu.ac.uk/information.html for further details about copyright and re-use permissions. 101 536 557 4 36 ^ 3 0 2 . Sheffield Hallam University REFERENCE ONLY ProQuest Number: 10694345 All rights reserved INFORMATION TO ALL USERS The quality of this reproduction is dependent upon the quality of the copy submitted. In the unlikely event that the author did not send a com plete manuscript and there are missing pages, these will be noted. Also, if material had to be removed, a note will indicate the deletion. uest ProQuest 10694345 Published by ProQuest LLC(2017). Copyright of the Dissertation is held by the Author. All rights reserved. This work is protected against unauthorized copying under Title 17, United States C ode Microform Edition © ProQuest LLC. ProQuest LLC. 789 East Eisenhower Parkway P.O. Box 1346 Ann Arbor, Ml 48106- 1346 Development of an Expert System for Cutting-off Process Selection K. L. Chow A thesis submitted
    [Show full text]
  • PICO 155 Precision Saw
    PICO 155 Precision Saw - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲ INSTRUCTION MANUAL 3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: [email protected] Web: http://www.metallographic.com Equipment Type: Precision Wafering Saw for 6-inch blades (will accept 3,4,5 and 7-inch blades) Model: PICO 155 Precision Saw Electrical Requirements: 110/220 Volts (single-phase) Frequency: 50/60 Hz Motor Horsepower: 125 watts Manual Revision Date: April 17, 2014 This instruction manual is provided with each piece of delivered equipment. Please read this instruction manual carefully and follow all installation, operating and safety guidelines. PICO 155 Precision Saw - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲ INSTRUCTION MANUAL 3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: [email protected] Web: http://www.metallographic.com WARRANTY Terms and Conditions applying to all PACE Technologies Products 1. LIMITED WARRANTY AND DISCLAIMER: PACE Technologies Products are warranted for one year from the purchase date to be free from defects in material and workmanship under correct use, normal operating conditions, and proper application. PACE Technologies obligation under this warranty shall be limited to the repair or exchange, at PACE Technologies option, of any PACE Technologies Product or part which proves to be defective as provided herein. PACE Technologies reserves the right to either inspect the product at Buyer’s location or require it to be returned to the factory for inspection. Buyer is responsible for freight to and from factory on all warranty claims. The above warranty does not extend to goods damaged or subjected to accident, abuse or misuse after release from PACE Technologies warehouse, nor goods altered or repaired by anyone other than specifically authorized PACE Technologies representatives.
    [Show full text]
  • Specifications & Fabrication Guidelines
    E-Mail: [email protected] 704-664-3223 Specifications & Fabrication Guidelines Table of Contents 1. Blue Alloy Steel International 4 Locations 5 What is Arcoplate? 6-7 Available Finishes 8 Arcoplate Advantage 9 2. Orange Frequently Asked Questions 10-13 Characteristics of Arcoplate 14-15 3. Purple Testing 16-22 Arcoplate Applications 23-27 Carry-Back Solutions 28-29 Arcoplate Thickness Solutions 30-33 4. Green Arcoplate Kits 34-38 5. Yellow Case Histories 40-43 Table of Contents 6. Red/ Fabrication Pink Fabrication Equipment 44-45, 82-83 Forming Arcoplate 46-50, 84-87 Attaching Arcoplate 51-61, 89-100 Joining Arcoplate 62-66, 101-111 Shear Force Protection 67 Polishing 68 69 Kit/ Design Information 70 Repairing Arcoplate 71 Cracks 7. Grey Technical Report 72-78 Arcoplate MSDS 79-80 Arcoweld MSDS 81 4 ALLOY STEEL INTERNATIONAL: Arcoplate’s 4home office and manufacturing facility are located in Perth, Western Aus- tralia. Operating for over 25 years, ASI is accredited to the latest ISO standards for production and design service. Satellite offices, outlets, and distributors across Australia, USA, Canada, Mexico, Brazil, India, Africa, Chile and Indonesia. Our American office is located in Mooresville, NC and is managed by Andrew Kostecki, President and Brand Development Manager of Alloy Steel North America LOCATIONS: *Contact ASNA for detailed list of locations 5 6 WHAT IS ARCOPLATE? A wear resistant fused alloy steel plate manufactured 6 by Alloy Steel International. Smooth dense, chromium carbide rich overlay
    [Show full text]
  • Vernon Abrasive
    Optional conveyors streamline material flow from either direction. ABRASIVE SAW SPECIFICATIONS CAPACITIES: Model VAS-0124 Pipe Diameter . 1"- 24" (25-610 mm) O.D. Structural Shapes . .. Up to 6" (150 mm) Bed Length (Std./Opt.) . 23'/64' (7/14 m) Min.-Max. Cut Length (Std/Opt) . 1/2"- 24'/44’ (12 mm - 7/14 m) Min. Length w/ Beveled Ends . 1/2" (12 mm) with pipe fixture; 6"- 24' (150 mm – 7.4 m) without pipe fixture Max. Weight per Foot . 150 lbs/ft (220 kg/m) to a maximum load of 3000 lbs. (1350 kg.) Cutting Method . Abrasive Wheel Max. Rotation Speed . 360 surface inches per minute Average Material Removal . 0.0328 cubic inches per second Motors: Cutter . 15 HP A.C. Motor Beveler . 7-1/2 HP A.C. Motor Pipe Rotation Drive . 1 HP D.C. Motor Hydraulic Power Unit . 5 HP Motor Dust Collection . 7-1/2 HP A.C. Motor Bearings . H.D. Pillow Block Temperature . 40-100 degrees ABRASIVE SAW Humidity (non-condensing) . 0-80% Raise/Lower Drive Rollers . Hydraulically Operated Pipe Hold-down Rollers . Pneumatically Operated Utility Requirements: Electrical. 460 VAC, 3Phase, 60 Hertz, 30KVA Air Supply . 100 psi Clean & Dry Shop Air @ 125 CFM 503 Jones Road, Oceanside, CA 92058 A Lincoln Electric Company. YOUR PARTNER IN SUCCESS THROUGH INNOVATION Specifications subject to change without notice. Phone: 760.433.5860 • Fax: 760.757.2233 © 2009 Vernon Tool Company. Printed in U.S.A. Web: www.vernnontool.com • E.mail: [email protected] Catalog: VAS-90.02 VERNON ABRASIVE SAW Abrasive wheels cut Speed, Simplicity, and Machine-like Quality and bevel all types of materials and Ideal for pipe & supply warehouses, mechanical contractors, and HVAC fabricators.
    [Show full text]
  • Hand Tools Chisels and Nail Sets Chisels and Scrapers a M Supply
    A M Supply Co. Phone:(405) 947-6695 · (800) 825-7431 Hand Tools Chisels and Nail Sets Stanley Hand Tools Nail Sets Part # Overall Length Tip Size S58-111 4" 1/32" S58-112 4" 2/32" S58-113 4" 3/32" S58-930 3 1/32", 2/32", 3/32" Self Centering Screw Hole Punch Part # Overall Length Face Dia. S58-013 3-1/16" 3/8" Wood Chisel Set Part # # Pieces Sizes S16-300 3 1/2", 3/4", 1" S16-970 3 1/2", 3/4", 1" Wood Chisels Part # Blade Width Overall Length S16-304 1/4" 9" S16-308 1/2" 9" S16-312 3/4" 9" S16-316 1" 9" S16-320 1-1/4" 9" S16-324 1-1/2" 9" S16-973 1/4" 9" S16-974 3/8" 9" S16-975 1/2" 9" S16-976 5/8" 9" S16-977 3/4" 9" S16-978 1" 9" S16-979 1-1/4" 9" S16-980 1-1/2" 9" S16-981 2" 9" Chisels and Scrapers Chisels True Temper Ice Chisel Part # Blade Handle 81-106 3.75" x 6" 48" Ash Service After the Sale 1 www.am-supply.com A M Supply Co. Phone:(405) 947-6695 · (800) 825-7431 Hand Tools Chisels and Scrapers Scrapers True Temper Flexible Scraper Part # Blade Width Tool Length 24-516 14" 65" Floor Scraper Part # Blade Width Tool Length 24-514 22" 65" 24-515 18" 65" Sidewalk and Ice Scraper Part # Blade Handle 78-202 7" x 6" 54" Ash Clamps & Vises Bar Clamps Irwin Tools Parallel Jaw Clamp Part # Clamping Cap.
    [Show full text]