DOCSLIB.ORG

Hand Tools Chisels and Nail Sets Chisels and Scrapers a M Supply

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text

Load more

A M Supply Co. Phone:(405) 947-6695 · (800) 825-7431 Hand Tools Chisels and Nail Sets Stanley Hand Tools Nail Sets Part # Overall Length Tip Size S58-111 4" 1/32" S58-112 4" 2/32" S58-113 4" 3/32" S58-930 3 1/32", 2/32", 3/32" Self Centering Screw Hole Punch Part # Overall Length Face Dia. S58-013 3-1/16" 3/8" Wood Chisel Set Part # # Pieces Sizes S16-300 3 1/2", 3/4", 1" S16-970 3 1/2", 3/4", 1" Wood Chisels Part # Blade Width Overall Length S16-304 1/4" 9" S16-308 1/2" 9" S16-312 3/4" 9" S16-316 1" 9" S16-320 1-1/4" 9" S16-324 1-1/2" 9" S16-973 1/4" 9" S16-974 3/8" 9" S16-975 1/2" 9" S16-976 5/8" 9" S16-977 3/4" 9" S16-978 1" 9" S16-979 1-1/4" 9" S16-980 1-1/2" 9" S16-981 2" 9" Chisels and Scrapers Chisels True Temper Ice Chisel Part # Blade Handle 81-106 3.75" x 6" 48" Ash Service After the Sale 1 www.am-supply.com A M Supply Co. Phone:(405) 947-6695 · (800) 825-7431 Hand Tools Chisels and Scrapers Scrapers True Temper Flexible Scraper Part # Blade Width Tool Length 24-516 14" 65" Floor Scraper Part # Blade Width Tool Length 24-514 22" 65" 24-515 18" 65" Sidewalk and Ice Scraper Part # Blade Handle 78-202 7" x 6" 54" Ash Clamps & Vises Bar Clamps Irwin Tools Parallel Jaw Clamp Part # Clamping Cap. Throat Depth IT2026500 24" 3-3/4" IT2026501 48" 3-3/4" Service After the Sale 2 www.am-supply.com A M Supply Co. Phone:(405) 947-6695 · (800) 825-7431 Hand Tools Concrete Tools Button Extension Handles Kraft Tools Aluminum Button Handles Part # Size Dia. CC289 6' Handle with Insert 1-3/4" CC291 10' Handle 1-3/4" CC292 12' Handle 1-3/4" Anodized Aluminum button Handles Part # Size Dia. CC289S 6' Handle 1-3/4" CC336 6' Handle 1-3/8" Button Handle Float Brackets Kraft Tools Converter Plate Part # Description Size CC287 Use to Convert a 4-Hole Mount to a 4" x 5" 2-Hole Mount Ezy-Tilt Part # CC290 Service After the Sale 3 www.am-supply.com A M Supply Co. Phone:(405) 947-6695 · (800) 825-7431 Hand Tools Concrete Tools Button Handle Float Brackets Kraft Tools Ezy-Tilt II Part # CC294 Knucklehead II Bull Float Bracket Part # CC296 Concrete Finish Brooms Kraft Tools All-Purpose Horsehair Floor & Finsih Broom Part # Size Bristle Material CC192 36" Black Horsehair Concrete Finishing Broom Aluminum Part # Size Bristle Material CC175 24" Medium-General Purpose (Black Poly) CC177 36" Medium-General Purpose (Black Poly) CC179 36" Extra Soft White Poly CC179-48SP 48" Extra Soft White Poly CC180 36" Natural Horsehair and Poly Blend Service After the Sale 4 www.am-supply.com A M Supply Co. Phone:(405) 947-6695 · (800) 825-7431 Hand Tools Concrete Tools Concrete Finish Brooms Kraft Tools Concrete Finishing Broom Wood Part # Size Bristle Material CC172 36" Medium-General Purpose (Black Poly) CC188 48" Plastic Extension Handle Broom Adapter Part # Description CC297 Attach paint rollers, brooms, etc., to molded thread extension handles. Concrete Finishing Trowels Kraft Tools Carbon Steel Part # Size Handle CF211PF 12" x 3" ProForm CF212PF 12" x 4" ProForm CF216C 14" x 3" Camel Back Wood CF217PF 14" x 4" ProForm CF221PF 16" x 3" ProForm CF232C 20" x 5" Camel Back Wood Concrete Kumalong and Rakes Kraft Tools Concrete Spreader Steel Part # Head CC903 19-1/2" x 5" Heavy Duty Steel Concrete Spreader Part # Handle CC902A 48" Wood Service After the Sale 5 www.am-supply.com A M Supply Co. Phone:(405) 947-6695 · (800) 825-7431 Hand Tools Concrete Tools Concrete Kumalong and Rakes Kraft Tools Lightweight Aluminum concrete Spreader Part # Description CC904 Spreader without Hook Assembled The Kumalong (Steel) Concrete Spreader Part # Size Hook CC106 19" x 4" No Concrete Tampers Kraft Tools Big Diamond Grill Pattern Part # Size CC879 36" x 8" CC881 48" x 8" Heavy Duty Tampers Part # Size Weight CC925 8" x 8" 11 lbs. Darbies Kraft Tools Extruded Magnesium Darby with Knob Handle Part # Size CF033 36" x 3-1/4" Service After the Sale 6 www.am-supply.com A M Supply Co. Phone:(405) 947-6695 · (800) 825-7431 Hand Tools Concrete Tools Darbies Kraft Tools Tapered Mahogany Darby Part # Size Hole Grips CF236 36" 1 CF237 36" 2 CF258 28" 1 CF259 45" 3 Flexible Blue Steel Edgers Kraft Tools Blue Steel Chamfer Tool Part # Size Lip Handle CF594PF 9" x 6" 3/4" ProForm Blue Steel Edgers Part # Size Radius Handle CF572 6" x 4" 1/4" Standard Wood Float and Fresno Brackets Kraft Tools Button Fresno or Broom Bracket Part # CC666 Threaded Handle Float Brackets Part # Description CC800 Complete 4-Hole bracket Service After the Sale 7 www.am-supply.com A M Supply Co. Phone:(405) 947-6695 · (800) 825-7431 Hand Tools Concrete Tools Fresno Trowels Kraft Tools All-Angle Steel Fresno Trowels Round Edn Part # Size CC853 48" x 5" All-Angle Steel Fresno Trowels Square End Part # Size CC907 30" x 5" CC908 36" x 5" CC910 48" x 5" Service After the Sale 8 www.am-supply.com A M Supply Co. Phone:(405) 947-6695 · (800) 825-7431 Hand Tools Concrete Tools Fresno Trowels Kraft Tools Bronze Fresno Trowel Groover Bits Part # Bit Depth CC623 1/4" Ezy-Tilt Fresno/Broom Adapter Part # CC295 Fresno Bracket Part # Description CC298 Bracket Complete Fresno Float Weight Part # Weight Description CC755 5 lb Fits over the 1/2" fresno bar Fresno Trowel with Ezy-Tilt Bracket Part # Size CC832 36" x 5" Fresno Trowel with Swivel Bracket Round End Part # Size CC636 36" x 5" Service After the Sale 9 www.am-supply.com A M Supply Co. Phone:(405) 947-6695 · (800) 825-7431 Hand Tools Concrete Tools Fresno Trowels Kraft Tools Stainless Steel Multi-Trac Fresno Part # Groove Spacing Size CC875 3/4" 24" x 5" Hand Floats Kraft Tools Bodark Wood Float Part # Size Handle CF642 16" x 2-1/4" Standard Wood CF643 16" x 3" Standard Wood CF644 20" x 3" Standard Wood Laminated Canvas-resin Float Square Ends Part # Size CF507 20" x 3-1/2" Redwood Float Part # Size CF251 12" x 5" Teakwood Float Part # Size CF269 18" x 3-1/4" Service After the Sale 10 www.am-supply.com A M Supply Co. Phone:(405) 947-6695 · (800) 825-7431 Hand Tools Concrete Tools Handles Kraft Tools 5 Ft. Wood Clevis Handle Part # Length Material CC386 5' Ash Knee Boards and Pads Kraft Tools Deluxe Heavy Duty Stainless Steel Knee Board Part # Size Qty CC151 28" x 8" Pair Denver Sliders Part # Size Qty CC152 28" x 8-1/2" Pair Lightweight Stainless Steel Knee Boards Part # Size Qty CC162 28" x 8" Pair Mag hand Floats Kraft Tools Round End Mag Float Part # Size Handle CF076PF 16" x 3-1/4" ProForm Service After the Sale 11 www.am-supply.com A M Supply Co. Phone:(405) 947-6695 · (800) 825-7431 Hand Tools Concrete Tools Mag hand Floats Kraft Tools Square End Mag Float Part # Size Handle CF012 12" x 3-1/4" Standard Wood CF016 16" x 3-1/4" Standard Wood CF016PF 16" x 3-1/4" ProForm CF018PF 18" x 3-1/4" ProForm Wide Mag Float Part # Size Handle CF015PF 16" x 3-1/2" ProForm Magnesium Screed Kraft Tools Aluminum Screeds Part # Size Length CC406 2" x 4" 6' CC410 2" x 4" 10' CC412 2" x 4" 12' CC414 2" x 4" 14' CC416 2" x 4" 16' CC424 2" x 5" 24' CC506 1" x 4" 6' CC508 1" x 4" 8' CC510 1" x 4" 10' Striker Screed Part # Size Length CC414AL 2" x 4" 14' Kraft Tools Rebar Bender Part # GG629 Service After the Sale 12 www.am-supply.com A M Supply Co. Phone:(405) 947-6695 · (800) 825-7431 Hand Tools Concrete Tools Kraft Tools Tie Wire Reel Part # GG309 Plaster Trowels Kraft Tools Trowel Bracket Part # Description CC658 Swivel Action Bracket Pool trowels Kraft Tools Blue Steel Shork Shanks Flexible Blade Part # Size Handle CF272BPF 14" x 3" ProForm CF277BPF 14" x 4" ProForm CF279BPF 16" x 4" ProForm Sidewalk and Curb Tools Kraft Tools Outside Nose Tool Part # Length width Radius Handle CF148 6" 4" 1" Standard Wood Service After the Sale 13 www.am-supply.com A M Supply Co. Phone:(405) 947-6695 · (800) 825-7431 Hand Tools Concrete Tools Stainless Steel Chamfer Tools Kraft Tools Single Lip Chamfer Tool Part # Size Lip Handle CF134 10" x 6" 3/4" Standard Wood Steel Edgers Kraft Tools Curb and Gutter Tools Part # Top Face Bottom Radius Curb Radius Gutter Handle CF511 6" 6" 6" 2" 3" Standard Wood Straightedges Kraft Tools Aluminum Pavers Straightedge Part # Size CC710 10' CC712 12' Threaded Extension Handles Kraft Tools Aluminum Handle Adapters Part # Description Dia. CC285 Female 1-3/4" CC286 Male 1-3/4" Aluminum threaded Extension Handles Part # Length Dia. CC239 10' 1-3/4" Service After the Sale 14 www.am-supply.com A M Supply Co. Phone:(405) 947-6695 · (800) 825-7431 Hand Tools Concrete Tools Threaded Extension Handles Kraft Tools Magnesium threaded Extension Handles Part # Length Dia. CC226 6' 1-3/4" Threaded to Button Handle Adapter Part # Description CC334 Male Universal Groover Kraft Tools Jumbo Hand Groover Part # Size Width Depth Handle CF119 6" x 4-3/4" 3/8" 1/2" Standard Wood Universal Hand Groover Part # Size Width Depth Handle CF118 6" x 3" 1/2" 1/2" Standard Wood Walking Groovers Kraft Tools 12" x 5" Hand Groover with Adjustable Groover Part # Radius Bit Depth Handle CF607 3/8" 1/2" Standard Wood Service After the Sale 15 www.am-supply.com A M Supply Co.
Recommended publications
  • Stnaley Catalog 2015

    Stnaley Catalog 2015

    HAND TOOLS CATALOG 2015 Stanley Black & Decker India Limited No. 28 “Akemps” 3rd Main, 1st Cross, Ashwini Layout, Koramangala Intermediate Ring Road, Bangalore - 560047 www.stanleyblackanddeckerindia.in www.stanleyrindia.in Helpline No. 1860-425-1111 Dealer’s Seal Rev CAT - 01/02/2015 Rev CAT www.stanleyindia.in 115 TOOLS THAT BUILD THE WORLD Since 1843, STANLEY® has been proudly offering quality and innovative tool solutions. For over a century, we have built a legacy by producing some of the most well known hand tools and storage products in the world, all to help you build a legacy of your own. We are committed to bringing you durable and quality tools that are inventive and distinct. With superior quality, constant innovation and rigorous operational improvements, STANLEY® defines excellence and is trusted by professionals around the globe. In 2013, STANLEY® embraced a new brand logo and identity, modernizing one of the most recognizable brands in the world. The new brand identity exemplifies STANLEY’s 170-year reputation for innovation, merit and performance. With the evolution of the brand logo, we are proud to offer you even more cutting edge products for all your job site needs. It is time to experience the power of innovation! THE HISTORY OF STANLEY® TOOLS 1863 1911 1936 1954 1980 Stanley introduced hammers Stanley began manufacturing Stanley manufactured its Time Magazine published a cover story titled The Stanley Works was presented the to their line-up. chisels and vises. first utility knife. “Do-It-Yourself – The New Million Dollar American Eagle Award from the American Hobby”.
  • Pipe Cutting Machines

    Pipe Cutting Machines

    PIPE CUTTING MACHINES YOUR PARTNER IN SUCCESS THROUGH INNOVATION Overview Vernon’s Commitment to Pipe Fabrication Table of Contents Pipe cutting technology has advanced rapidly Investment in design engineering, advanced Performance Engineered Products . .4-5 since the days of hand-held torches and technology, and experienced staff constitute Common Applications . .6-7 wraparound paper templates. A single cutting Vernon’s commitment to the fabrication market. machine can now supply enough pipe to satisfy Alignment of interests and continuous exchange Machine Configuration . .8-9 5 to 10 fit-up and welding stations. of information between Vernon and its Pipe Handling Equipment . .10-11 Knowledgeable business owners recognize that customers have forged relationships that have Turning Roll & Conveyor Assembly . .10 a centralized, efficient cutting operation governs existed for more than forty years. Loyalty and Entrance Conveyor . .11 all downstream operations. Speed, safety, and respect have bred a common goal of improving Discharge Conveyor . .11 quality have become the benchmarks of productivity and fostering innovation. Mechanized Cutting Assemblies . .12-13 profitable pipe fabrication, the same qualities While many of the basic cutting and material that describe Vernon pipe cutting machines. handling concepts are still valid today, Vernon Two-Torch Straight Cut-off Assembly . .12 In 1948, Vernon Tool Company acquired the continues to incorporate the newest technology Mechanical Pantograph Assembly . .13 rights to manufacture the Douglas cutting in its machines. Innovations like machine- Computerized Profiling Assemblies . .13 machine, a simple mechanical pantograph for mounted microprocessors, programmable logic Multi-Axes Controls . .14 burning straight cuts, simple miters and saddles. controls, and network-compatible operating Optional Accessories .
  • 866-Evo-Tool

    866-Evo-Tool

    ® ® 866-EVO-TOOL Evolution Industrial Full Range Catalog DOWNLOAD A FREE QR READER APP & SCAN THE QR CODE! Instantly watch all our HD Videos on your Smart Phone. Make sure the HD setting is turned on. If you don’t have a Smart Phone, you can also watch all the videos online at www.evolutionsteel.com. ® Company Profile Evolution is a leader in the steel and fabrication industry, offering industrial metal cutting products, metal drilling products and related accessories. With a strong focus on customer service and determination to achieve unmatched quality, Evolution offers the highest product value to a rapidly growing and changing market. Evolution's United States headquarters is based out of Davenport, Iowa, allowing centralized distribution for the entire North American customer base. Worldwide locations offer distribution in Europe, CONTENTS Asia, South America, Australia and Africa. “Innovation Defined” is the company motto and Evolution achieves this by continuously improving existing products and adding new Metal Cutting products to effectively complement Evolution’s current portfolio. EVOSAW185 - 7-1/4” Chop Saw ...........4 Quality Assurance & Warranty EVOSAW380 - 14” Chop Saw . .5 EVOSAW180HD - 7-1/4" Circular Saw . 6 All Evolution power tools are put through quality assurance EVOSAW230 - 9” Circular Saw . 7 testing and are guaranteed to be free of defects in workmanship Industrial Saw Blade Range . 8 or materials for three years from the date of purchase. Refer to Evolution's instruction manuals for full details. Industrial Magnetic Drilling All warranty claims must be submitted by the owner/user of the product and can only be evaluated and authorized by Evolution's EVOMAG28 - 1-1/8" x 2" Magnetic Drill .
  • Cut-Off Saw Cut-Off (Abrasive) Saw the Rules and Procedures in Force Where People Are at Work 1

    Cut-Off Saw Cut-Off (Abrasive) Saw the Rules and Procedures in Force Where People Are at Work 1

    0210 Safety Guidance 2 STROKE PETROL v:032017 Redistributed under licence from HAE by Power Tool Rentals Ltd. Licence expires on 30/06/2017 Using the Cut-off Saw Cut-off (Abrasive) Saw The rules and procedures in force where people are at work 1. Wear protective equipment including goggles and dust mask. may require the person responsible for this equipment to 2. Check that the cutting wheel is fitted securely, and that the guard is properly adjusted. carry out a specific risk assessment. 3. Always hold the machine securely with, both hands: left hand on the front handle, right hand on the rear. It is important to read all of this leaflet 4. Be prepared for the reactive force when the wheel contacts the surface to be cut: the BEFORE you use the Cut-off Saw machine will pull away from you, or pull up a vertical surface. 1. Plan your work and think ahead to make sure you will always 5. Use full throttle: make sure the wheel is running at full speed before lowering it carefully be working safely. onto the surface. 2. Petrol mixture is highly flammable. Take care not to cause a fire or explosion. 6. If the machine starts to labour and slow down do not force it so hard. Do not overload the machine. Long shallows cuts keeping the wheel speed up are more effective than 3. This cut-off saw is designed to cut concrete, masonry, asphalt, aggressive pressure. steel, cast iron and similar materials using the appropriate abrasive or diamond wheel.
  • 2021 Line Guide

    2021 Line Guide

    2021 Line Guide Trust | Excellence | Resourcefulness | Teamwork | Respect MARS SUPPLY ~ WHO WE ARE ● Mars was founded in 1924 to serve the iron mining, wood and paper industries in Northern Minnesota. Today, we do business in five states and offer an expanded and unique blend of products and services un- like any other local independent industrial distributor in our market. ● In 2013, Mars acquired the Walter Hammond Co. of Minneapolis. Custom Founded in 1945, Hammond is a full service distributor of cutting tools Blade and related tooling and is now a division of Mars. Welding ● In 2020, Mars acquired Machine Tool Supply of Eagan, MN. Estab- lished in 1953, Machine Tool Supply is well known in the industry as a premier Norton Abrasives distributor. ● Our Valued Services Include: Lenox Certified Bandsaw Blade Weld Center, Safety Audits and Training, Hydraulic Track Tool Repair, Air/ Hydraulic Hose Coupling. We also offer Air / Electric Power Tool Repair; which is in our Duluth location only. ● Our “Supply Management Solutions” SMS Group assists customers in developing supply chain programs that reduce costs and improve service levels in their facilities. Each one is unique, built around Power Tool Repair the customer’s priorities and goals and is designed to produce (Duluth Location Only) documented costs savings. ● Our Website contains thousands of our most popular items at the click of your fingertips. We have three distribution centers -- Bloomington, Minneapolis and Duluth. You will find both stock and non-stock items listed on our websites. Be sure to visit MarsSupply.com and for the quickest way to place an order.
  • Download the Penn Tool Product Guide!

    Download the Penn Tool Product Guide!

    Product Guide Quality Products • Superior Service • Competitive Pricing Penn Tool Sales & Service, Inc. • Abrasives • Tool Trailers • Air & Hydraulic Equipment Designed and Built to Your • Cutting Tools - All Makes & Models Specifications • Motorola Radios Supplied & Manned for Your • Safety Equipment & Supplies Outages or Turnarounds • Shipping to Any Location • Welding Supplies Youngstown, OH Lancaster, PA Ann Arbor, MI Cincinnati, OH 625 Bev Road 912 Links Avenue 1900 Highland Drive 2631 Crescentville Road Youngstown,OH 44512 Landisville, PA 17538 Ann Arbor, MI 48108 Sharonville, OH 45241 Phone 800-321-4010 Phone 800-258-9505 Phone 800-848-5577 Phone 800-842-3325 330-758-0845 717-898-3197 734-973-0004 513-772-8982 Fax 330-758-6028 Fax 717-898-9347 Fax 734-973-3220 Fax 513-772-8044 Chicago, IL St. Louis, MO Atlanta, GA Winston Salem, NC 9623 West 194th Street 9500-D Collinsville Road 3380 Town Point Drive 2431 Spaugh Industrial Dr Mokena, IL 60448 Collinsville, IL 62234 Kennesaw, GA 30144 Winston Salem, NC 27103 Phone 888-834-7616 Phone 800-786-2063 Phone 866-289-8917 Phone 800-958-5915 708-478-1254 618-343-0460 678-581-0020 336-774-2370 Fax 708-478-1355 Fax 618-343-0461 Fax 678-581-2828 Fax 336-774-2374 Houston, TX Riverside, MO Lexington, SC 16920 N. Texas Avenue 601 NW Business Park Ln 377 Riverchase Way Unit B Webster, TX 77598 Riverside ,Mo 64150 Lexington, SC. 29072 Phone 877-290-4294 Phone 855-855-3820 Phone 855-222-0292 281-316-6918 816-741-1010 803-794-0900 Fax 281-316-6963 Fax 816-741-1019 Fax 803-739-6940 www.penntoolsalesandservice.com
  • Best Practices for Cut-Off Saw Maintenance

    Best Practices for Cut-Off Saw Maintenance

    Best Practices for Cut-Off Saw Maintenance Fill your saw with fresh, quality fuel with Inspect saw for cracks in the blade little to no ethanol (non-oxygenated guard and belt guard, missing feet, gas/89 octane or higher). This will and working guard stops before improve saw performance and extend running. Inspect saw for loose nuts useful life. and bolts before running. Use of 2 cycle synthetic oil will help Inspect diamond blade for cracks in prolong the life of the saw. Synthetic segments and gullets. Inspect abrasive oils have better purity and stability so blade for fraying or warpage. Inspect they outperform conventional oils. flange for excessive wear, sharp edges You get what you pay for. and missing tabs. Replace both blade and flange if necessary before running. Run your saw out of fuel before storing Do not run wide open throttle for more for the winter. Always use fresh, properly than 10 seconds while not under load. mixed fuel in the spring. Clean saw after every use to avoid build Use saw blade (wheel) with correct arbor up of dust when dry cutting or slurry for safety and best performance. when wet cutting. Replace your air filter only when your Use water when cutting concrete/asphalt saw starts to lose power in the cut. to avoid silica exposure which can cause silicosis, a serious lung disease. Early replacement or blowing out or Call Esch for cutting equipment, diamond cleaning the filter can damage pistons/ and abrasive saw blades, cut-off saw cylinders because of dirt ingestion. parts and service, and expert advice.
  • United States Patent (10) Patent N0.: US 6,945,850 B2 Perrey (45) Date of Patent: Sep

    United States Patent (10) Patent N0.: US 6,945,850 B2 Perrey (45) Date of Patent: Sep

    US006945850B2 (12) United States Patent (10) Patent N0.: US 6,945,850 B2 Perrey (45) Date of Patent: Sep. 20, 2005 (54) SAW BLADE WITH ABRASIVE SURFACE 3,914,906 A * 10/1975 Barnes ...................... .. 30/514 4,369,685 A * 1/1983 Trigg ...... .. 76/112 Inventor: DavidCL Jefferson AI Perrey, City MO (Us)Brush Creek 4,675,975 A * 6/1987 Kucharczyk. .et . a1.. ........ .. .. 29/566 651’09_8832 ’ 5,018,276 A * 5/1991 Asada ....................... .. 30/347 5,115,796 A 5/1992 Schweickhardt ....... .. 125/13.01 . _ . 5,239,978 A * 8/1993 Plangetis ........ .. 125/16.01 (ak) Nome‘ sublecbto any dlsclalmer: the term Ofthls 5,518,443 A * 5/1996 Fisher ................. .. 125/15 Patent 15 extended or adlusted under 35 5,529,528 A 6/1996 Young 6161. .. 451/28 U-S-C- 154(b) by 181 days~ 5,704,828 A * 1/1998 Young et a1. 451/461 5,868,125 A * 2/1999 Maoujoud .... .. 125/15 (21) Appl, No_; 09/777,333 6,039,641 A * 3/2000 suug ......................... .. 125/22 (22) Filed: Feb 6, 2001 FOREIGN PATENT DOCUMENTS (65) Prior Publication Data GB 2195099 A * 3/1988 ......... .. B24B/21/00 US 2002/0106983 A1 Aug. 8, 2002 * Cited by examiner (51) Int. c1.7 .......................... .. B23F 21/03- B28D 1/02 Primary Ex“mi””—DaVid 13' Thomas (52) US. Cl. ................. .. 451/28- 125/1301- 125/1601- (74) Attorney’ Agent’ 0’ Fi””_Lathr°p 8‘ Gage LC 125/21; 83/835; 451/540 (57) ABSTRACT (58) Fleld 0f 41561é2i’7g6’2g; The present invention relates to a saW blade for cutting and 540 ’541 ’548_’ 125/’12 1’3 01 ’15 i6 01’ ?nishing the surface of a Work piece.
  • Investigation of Abrasive Saw Kickback

    Investigation of Abrasive Saw Kickback

    Investigation of abrasive saw kickback The MIT Faculty has made this article openly available. Please share how this access benefits you. Your story matters. Citation Burcat, Steven et al. "Investigation of abrasive saw kickback." International Journal of Occupational Safety and Ergonomics (July 2020): dx.doi.org/10.1080/10803548.2020.1770529 © 2020 Central Institute for Labour Protection–National Research Institute (CIOP- PIB) As Published http://dx.doi.org/10.1080/10803548.2020.1770529 Publisher Informa UK Limited Version Author's final manuscript Citable link https://hdl.handle.net/1721.1/128200 Terms of Use Creative Commons Attribution-Noncommercial-Share Alike Detailed Terms http://creativecommons.org/licenses/by-nc-sa/4.0/ Investigation of Abrasive Saw Kickback Steven Burcata, Brian Yuea, Alexander Slocuma & Tal Cohena,b,* aDepartment of Mechanical Engineering, Massachusetts Institute of Technology, USA; bDepartment of Civil and Environmental Engineering, Massachusetts Institute of Technology, USA 1 Abstract 2 Saw kickback can cause fatal injuries, but only woodcutting saws have 3 regulations and assessment methodologies for kickback. These regulations 4 do not apply to abrasive cutting saws, as their cutting mechanism and 5 dominant kickback mode differ from those of woodcutting saws. This work 6 combines theoretical and experimental tools to investigate abrasive saw 7 kickback. A theoretical model based on frictional engagement during a 8 pinch-based kickback event is shown to predict resultant kickback energy in 9 good agreement with experimental measurements. These measurements 10 were obtained using a specialized machine that generates pinch-based 11 kickback events and measures resultant kickback energy. Upon validating 12 the model, two representative saws, a circular cutoff saw and a chainsaw, 13 were tested using the prototype machine to evaluate their comparative 14 kickback risk.
  • Tube and Pipe Cutting Techniques; Advantages and Limitations Abrasive to Shear, Each Method Has Its Place

    Tube and Pipe Cutting Techniques; Advantages and Limitations Abrasive to Shear, Each Method Has Its Place

    TPJ ‐ The Tube & Pipe Journal® Tube and pipe cutting techniques; advantages and limitations Abrasive to shear, each method has its place By Leonard Eaton, Contributing Writer January 24, 2002 Many factors are involved in choosing a particular method or technology for cutting tube or pipe. Many factors are involved in choosing a particular method or technology for cutting tube or pipe. The basic factors that affect the cut are the tube or pipe material, wall thickness, squareness of ends, end‐conditioning requirements, and secondary process requirements. Other factors that play a role include production volume, cutting efficiency, overhead costs, and special requirements of the tube or pipe material. Abrasive Cutting Abrasive sawing is a basic, manual method of cutting‐to‐length product to the customer's specification in any alloy. An abrasive saw operates with a circular abrasive blade or resin‐ composition wheel—either wet or dry—that grinds through the product. Cut size capabilities depend on the machine. Some abrasive cutting machines can handle a solid round up to 4 in. outside diameter (OD). This general‐purpose method is useful for hand‐loading applications and small product runs that do not require critical end conditions. While an abrasive saw is easy to use and requires little or no setup time, it cannot provide a square cut or tight tolerances. Because the process uses a cutting or burning action, it is not efficient for thick‐walled material. It also might leave a heat‐affected zone (HAZ) that can affect secondary processing. While abrasive sawing is inexpensive and quick, it produces significant kerf and a heavy burr that might have to be removed by deburring.
  • 866-Evo-Tool

    866-Evo-Tool

    ® ® 866-EVO-TOOL Evolution Professional Full Range Catalog DOWNLOAD A FREE QR READER APP & SCAN THE QR CODE! Instantly watch all our HD Videos on your Smart Phone. Make sure the HD setting is turned on. If you don’t have a Smart Phone, you can also watch all the videos online at www.evolutionbuild.com. ® Company Profile Evolution is a leader in the steel and fabrication industry, offering industrial metal cutting products, metal drilling products and related accessories. With a strong focus on customer service and determination to achieve unmatched quality, Evolution offers the highest product value to a rapidly growing and changing market. Evolution's United States headquarters is based out of Davenport, Iowa, allowing centralized distribution for the entire North American customer base. Worldwide locations offer distribution in Europe, Asia, South America, Australia and Africa. CONTENTS “Innovation Defined” is the company motto and Evolution achieves this by continuously improving existing products and adding new products to effectively complement Evolution’s current portfolio. Multipurpose Cutting Quality Assurance & Warranty RAGEB - 7-1/4” Circular Saw .............3 RAGE2 - 14” Chop Saw....................4 All Evolution power tools are put through quality assurance RAGE4 - 7-1/4” Chop Saw...............5 testing and are guaranteed to be free of defects in workmanship RAGE3 - 10” Miter Saw . 6 or materials for three years from the date of purchase. RAGE3-DB - 10” Double Bevel Miter Saw...7 Refer to Evolution's instruction manuals for full details. Our Blade Range .................... 8-9 All warranty claims must be submitted by the owner/user of the 12" Electric Disc Cutter .................10 product and can only be evaluated and authorized by Evolution's Service Department.
  • A Sheffield Hallam University Thesis

    A Sheffield Hallam University Thesis

    Development of an expert system for cutting-off process selection. CHOW, K. L. Available from the Sheffield Hallam University Research Archive (SHURA) at: http://shura.shu.ac.uk/19464/ A Sheffield Hallam University thesis This thesis is protected by copyright which belongs to the author. The content must not be changed in any way or sold commercially in any format or medium without the formal permission of the author. When referring to this work, full bibliographic details including the author, title, awarding institution and date of the thesis must be given. Please visit http://shura.shu.ac.uk/19464/ and http://shura.shu.ac.uk/information.html for further details about copyright and re-use permissions. 101 536 557 4 36 ^ 3 0 2 . Sheffield Hallam University REFERENCE ONLY ProQuest Number: 10694345 All rights reserved INFORMATION TO ALL USERS The quality of this reproduction is dependent upon the quality of the copy submitted. In the unlikely event that the author did not send a com plete manuscript and there are missing pages, these will be noted. Also, if material had to be removed, a note will indicate the deletion. uest ProQuest 10694345 Published by ProQuest LLC(2017). Copyright of the Dissertation is held by the Author. All rights reserved. This work is protected against unauthorized copying under Title 17, United States C ode Microform Edition © ProQuest LLC. ProQuest LLC. 789 East Eisenhower Parkway P.O. Box 1346 Ann Arbor, Ml 48106- 1346 Development of an Expert System for Cutting-off Process Selection K. L. Chow A thesis submitted