CP 155-LS ARCHITECTURAL EXTENSIONS
TOGETHER FOR BETTER
1 13 oktober 2014 Context
Insight ‘The world is your wallpaper - extend your living room with the outside’ Architectural trend: indoor and outdoor are integrated. Boundaries disappear. Contemporary living spaces can benefit from large sliding elements: they create a visual extension to the outdoors, a sense of space and allow lots of light to enter.
Promise Our sophisticated sliding system CP 155-LS is now available with pocket solution to hide the sliding vents if opened, multi-rail to open up till 8 vents and zero-threshold for easy access. Designed to meet the needs of the North-American market, the novelties are also very attractive to other markets. Tested according to EN and ASTM standards.
2 13 oktober 2014 CP 155-LS ARCHITECTURAL EXTENSIONS Subject of the launch
Different extensions to CP 155-LS are available in a modular concept, allowing also the combination of these extensions. This creates a highly flexible system offering good performances.
Pocket solution The pocket solution is a modular system, which enables all vents to slide into your wall, creating an even greater open space without any visible elements. For optimal flush aesthetics in the open position, the vents can be provided the identical finish to the wall. The pocket solution is available for the lift and sliding systems in duo rail, 3-rail or up to 8-rail compositions and zero threshold as well.
Multi-rail An innovative clamping solution allows the expansion of the outer frames of the sliding system from 2 to up to 8 rails. These multi rail solutions allow designs with very large openings. Therefore special connection pieces are available to create outer frames which exceed 7 meter length.
Zero threshold For easy and unobstructed access, a additional zero threshold solution can be applied, in which the floor finishing can continue. The dedicated rail profiles are available in different heights depending on the floor finish. These separate rail profiles give the possibility to stop the rail where the element movement ends, thus improving the aesthetics of the floor finish.
The new extensions can be combined with the existing configurations.
3 13 oktober 2014 CP 155-LS ARCHITECTURAL EXTENSIONS Benefits
Fabricators Comfort of a modular system Modular system Multi-rail solution with only 1 clamping profile Minimal number of articles – maximum number of configurations
Architects Architectural flexibility Multiple configurations, including multi-rail and pocket Create sense of space and allow a lot of light Indoor and outdoor are integrated. Boundaries disappear. Large glass panels with a weight up to 400 kg
User Premium system designed for high end buildings Superior quality Best comfort: fulfilling most recent and near future market demands on insulation and performance Different access solutions to cover different needs and wishes Open up your complete sliding window and hide the vents in the wall
4 13 oktober 2014 CP 155-LS ARCHITECTURAL EXTENSIONS Business
Market (drivers)
•Main driver: Extension of architectural possibilities
•Main target market: High-end market of sliding doors in the North-American continent
•Focus markets (geographic) •USA •Canada
•Open to all markets: Other markets can also benefit!
5 13 oktober 2014 CP 155-LS ARCHITECTURAL EXTENSIONS Business
Segmentation Reynaers assortment
CP 130-LS CP 155-LS Price/value champion Performance champion Maximum weight 300 kg 400 kg Maximumheight 2700 mm 3000 mm Thermal performance Ud 2.1 2.0 *monorail XQ 2000 x 2180 Zero Threshold Multirail Zero Threshold Multirail
Performance (ASTM) AW 150Pa AW180Pa R-PG20 AW 220 Pa R-PG20 AW 220 Pa R-PG25 Performance (EN) Air 2 3 3 3 Wind C1 B2 C2 3A Water 2A (50 Pa) 4A (150 Pa) 8A (450PA) 7A (300 PA)
6 13 oktober 2014 CP 155-LS ARCHITECTURAL EXTENSIONS Business
PRICING
Price without with comparison pocket pocket POCKET
3-rail 100% 116%
Price zero comparison standard treshold 3-rail 100% 105%
standard 3-rail 4-rail 5-rail Price 100% 159% 217%
Surface 100% 133% 167%
Vent width 2000mm, Vent height 2500mm
7 13 oktober 2014 TECHNICAL INFORMATION Extensions on standard CP 155-LS
CP 155-LS
POCKET SOLUTION MULTI-RAIL ZERO THRESHOLD
8 13 oktober 2014 TECHNICAL INFORMATION MODULAR SYSTEM
POCKET MULTI-RAIL
ZERO TRESHOLD
9 13 oktober 2014 POCKET SOLUTION POCKET SOLUTION Concept
Vents slides behind wall indoor and outdoor are integrated. Flush .. (open and closed) Extra finishing Flush Modular system
11 13 oktober 2014 POCKET SOLUTION Concept Closed
Vents slides behind wall. indoor and outdoor are integrated. Boundaries disappear.
Opened
12 13 oktober 2014 Flush finishing. POCKET SOLUTION Concept
Flush finishing. Doors open Opened or closed flush finishing
Flush finishing.
3d
Doors closed
Flush finishing.
13 13 oktober 2014 POCKET SOLUTION Smaller interlock profile (006.1881.00) Concept
Extra finishing flush. different interlock profiles
Extra finishing (same as Flush finishing wall finishing)
14 13 oktober 2014 POCKET SOLUTION Concept
Modular system Same profile (006.1577.XX) only 2 profiles 2 – 3 – 4 - .. rail
15 13 oktober 2014 POCKET SOLUTION Modular
POCKET MULTI-RAIL
ZERO TRESHOLD
16 13 oktober 2014 POCKET SOLUTION Technical information
Built on standard CP 155-LS System Double interlock Wind and water tightness. Double brush inside and outside Wind and water tightness. Wall finishing profile. Distance from wall ensured. Consealed handle.
17 13 oktober 2014 POCKET SOLUTION Technical information
Built on standard CP 155-LS
CP 155-LS
18 13 oktober 2014 POCKET SOLUTION Main cover profile Technical information 006.1575.XX
Main cover profile
19 13 oktober 2014 Double interlock POCKET SOLUTION 006.1881.00 Technical information 006.1882.00
Double interlock Wind and water tightness.
20 13 oktober 2014 POCKET SOLUTION Double brush (081.9241.07) Technical information on both sides
Double brush inside and outside Wind and water tightness. 3d
21 13 oktober 2014 POCKET SOLUTION
Technical information Wall finishing profile 006.1880.XX
Wall finishing profile
22 13 oktober 2014 POCKET SOLUTION Technical information
Distance pieces Wind and water tightness. Perfect distance between wall and outer frame
Set Distance pieces 080.9790.04
23 13 oktober 2014 POCKET SOLUTION Technical information
Consealed handle 062.7866.PA 300 kg
24 13 oktober 2014 MULTI-RAIL MULTI-RAIL Concept
Multi-rail
Same profile
Same profile Standard 3-rail Same profile
26 13 oktober 2014 MULTI-RAIL Technical information
Frame connection bottom
Additional end piece per extra rail
End piece standard 3-rail
27 13 oktober 2014 MULTI-RAIL Technical information
Drainage principle parts can be milled separated
Space between parts
gasket
28 13 oktober 2014 MULTI-RAIL Modular
POCKET MULTI-RAIL
ZERO TRESHOLD
29 13 oktober 2014 ZERO THRESHOLD ZERO THRESHOLD Concept
Modular system with zero threshold finishing Separated rail profiles possibility to stop where wanted. Different heights rail profiles Clamping system expansion to multi-rail Drainage holes milled before clamping.
31 13 oktober 2014 ZERO THRESHOLD Concept
ZERO threshold finishing
Flush finishing.
Flush finishing.
32 13 oktober 2014 ZERO THRESHOLD Concept
Bottom drainage profiles
33 13 oktober 2014 ZERO THRESHOLD Concept
Separated rail profiles Different heights of rail profiles
Floor ≤ 25mm Floor ≤ 38mm
34 13 oktober 2014 ZERO THRESHOLD Concept
Rail profile only where needed continious floor
35 13 oktober 2014 ZERO THRESHOLD Concept
36 13 oktober 2014 ZERO THRESHOLD Concept
Drainage principle
37 13 oktober 2014 ZERO THRESHOLD Concept
Wind load deflection
Reinforcement piece
To keep vent on track
38 13 oktober 2014 ZERO THRESHOLD modular
POCKET MULTI-RAIL
ZERO TRESHOLD
39 13 oktober 2014 TEST RESULTS Performances tabel
CP 155-LS dimensions Results ASTM Results EN Zero treshhold (3-rail)
Air: class 3 3810 x 3000 AW 220Pa R-PG20 Wind: Class 2C Water: 450 Pa (class 8A)
Multirail (4-rail)
Air: class 3 5010 x 3000 AW220Pa R-PG25 Wind: Class 3A Water: 300 Pa (class 7A)
ZERO TRESHOLD
40 13 oktober 2014 TOGETHER FOR BETTER