Procedure Card for IDT9000S GENERAL ®

TM SCREENING INSTRUCTIONS TESTING KITS FOR DRUGS SNIFFER Test Kit As a precaution, gloves and eye protection should be worn when handling Read substances and using test units. Do not puncture any part of unit. Do not remove probe Before once a capsule is broken. In the unlikely event of a spill, rinse affected area thoroughly with water. Keep out of reach of children. All results are presumptive. If necessary, further Complete Steps 1-7 before proceeding. Use testing by a competent drug testing lab can provide additional identification.

Gently insert Remove the Smart- Remove the The kit is not for Cocaine or Marijuana testing. Use Cocaine/Crack Sniffer Test Kit Tip™ probe from cover paper the Accessory the appropriate from the Smart- (IDT1000S) or Marijuana/Hashish Sniffer Test Kit (IDT3300S) to test for those drugs. 1 into the Sniffer. 2 3 tion test kit. Tip™ probe. a Push until a click With thumb and forefinger, Gently shake test unit sound is heard. squeeze chamber 1 until epar for 2-3 seconds. r 8 9 CLICK! Do not capsule breaks.

touch the tion est P

T adhesive. Accessory Sniffer Chamber 1 Identifica Insert the Smart-Tip™ Collect particles from the probe into the Accessory with the adhesive area suspect surface. Vacuum 4 5 up to 10 seconds. tion facing out from the Sniffer. Important: a If a brown powder is present, the appearance of a purple-red color Adhesive Push down the Suspect Smart-TipTM strongly indicates the presence of Brown Heroin. epar located on the Surface r If a brown powder is not present, the appearance of a purple-red FRONT of probe until it is completely color indicates the presence of a drug listed in Chamber 2 Results.

est P the probe for T collecting locked into the Do not use If a purple-red color develops, proceed to Disposal. sampling unit. Results If no purple-red color develops, proceed to Step 10.

particles MAX power. Chamber 1 * Note: The liquid remaining the yellow color of the reagent or a blue-green color on the adhesive, does not indicate a positive result. STOP Remove the Smart-Tip™ Lock Smart-Tip™ probe into test unit. Do not probe from the Sniffer. With thumb and forefinger, Gently shake test unit 6 7 Press firmly. continue squeeze chamber 2 until tion unless

a for 2-3 seconds. probe is 10 capsule breaks. 11 locked tion epar r below the Flex Flex Pins and cannot est P

T Pins be removed Chamber 2

from the Identifica test unit.

CONTINUE TO KIT INSTRUCTIONS ON OTHER SIDE. The appearance of a purple-red color indicates the presence of one of the following drugs: • Use only Sniff & KnowTM Detection Kits with the Sniffer. Heroin, , , Ecstasy/MDMA, , , DMT, Ketamine, , • The Sniffer can be used for screening suspected people, clothing, hands, Methadone, , , mCPP, MDMAI, • packages, shipping containers, and vehicles. MDPBP, MDPV, MPA, PCP, Pentylone, PMA, PMMA, • The Sniffer is for relatively clean surfaces. 2-aminoindane, 3-Methylbutyrfentanyl, 3-Methylfentanyl, 4-Fluorobutyrfentanyl, 4-Fluoroisobutyrfentanyl, • Make sure to use the proper instructions. Testing procedures may vary for Results

Chamber 2 4-Methoxybutyrfentanyl, other synthetic/designer drugs. ting Notes

a • different types of detection kits. Using the wrong instructions may lead to If no purple-red color develops, • improper identification. the above listed drugs are not present.

Oper • For optimum Sniffer operation time, do not use maximum (MAX) power. * Note: The liquid remaining the yellow color of the reagent or a blue-green color on the adhesive, does not indicate a positive result. • For maintenance and troubleshooting see the Sniffer Operating Manual.

v2 Disposal The test kit is safe to dispose of in the trash. 30list 01-19

Manufactured by IDenta Ltd Manufactured by IDenta Ltd IDenta www.identa-corp.com IDenta www.identa-corp.com World Leader in Patented Technology • Made in Israel World Leader in Patented Technology • Made in Israel Forensic Products Forensic Products