DOCSLIB.ORG

VP IEC Júl 2012

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
VP IEC Júl 2012 NÁVRHY NORIEM IEC PREDLOŽENÝCH NA VEREJNÉ PREROKOVANIE za obdobie od 1. júla 2012 do 31. júla 2012 Documents Title Closing Date 1/2210A/FDIS Amendment 1 to IEC 60050-151: International Electrotechnical Vocabulary - Part 151: Electrical and magnetic devices (Proposed horizontal 2012-10-12 standard) 3/1108/CD IEC 61082/Ed.3: PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY, Part 1: Rules 2012-10-12 7/622/CD IEC 62774/Ed1: Conductors for overhead lines - Coated metallic wire for concentric lay stranded conductors 2012-10-12 9/1696A/CDV IEC 62724 Ed.1: Railway applications - Fixed installations - Electric traction - Insulating synthetic rope assemblies for support of overhead 2012-12-07 contact lines 9/1711/FDIS IEC 60571 Ed.3: Railway applications - Electronic equipment used on rolling stock 2012-09-21 9/1712/CD IEC 62290-1 Ed.2: Railway applications - Urban guided transport management and command/control systems - Part 1: System principles 2012-10-26 and fundamental concepts 9/1713/CD IEC 62290-2 Ed.2: Railway applications - Urban guided transport management and command/control systems - Part 2: Functional 2012-10-26 requirements specification 10/890/CD IEC 60839 Ed.3: Specifications for unused silicone insulating liquids for electrotechnical purposes 2012-10-19 17A/1018/CDV Amendment 1 to IEC 62271-109 Ed2: High-voltage switchgear and controlgear - Part 109: Alternating current series capacitor by-pass 2012-12-07 switches 17B/1783/CDV IEC 60947-6-1 am1 Ed. 2.0: Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment 2012-12-14 17B/1788/CDV IEC 62626-1 Ed.1: Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch outside the scope of IEC 60947-3 2013-01-04 for various applications, to provide isolation of electrical equipment during repair and maintenance work 17D/460/FDIS IEC 61439-4 Ed.1: Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction 2012-09-21 sites (ACS) Page 1 of 7 26/488/CD IEC 62135-2 Ed.2: Resistance welding equipment - Part 2: Electric compatibility (EMC) requirements 2012-10-26 26/489/CDV IEC 60974-3 Ed.3: Arc welding equipment - Part 3: Arc striking and stabilizing devices 2013-01-04 27/874/CD IEC/TS 62796 Ed. 1.0: Energy efficiency in electroheating installations 2012-09-28 29/779/CD Amendment 1 to IEC 62489-1: Electroacoustics - Audio-frequency induction loop systems for assisted hearing - Part 1: Methods of 2012-09-07 measuring and specifying the performance of system components 31/999/FDIS IEC 60079-1/Ed7: Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" 2012-09-07 31J/207/CDV IEC 60079-17/Ed5: Explosive atmospheres - Part 17: Electrical installations inspection and maintenance 2012-12-14 31J/208/CDV IEC 60079-14/Ed5: Explosive atmospheres - Part 14: Electrical installations design, selection and erection 2013-01-04 32A/295/CD Amendment 1 to IEC 60282-1/Ed7: High-voltage fuses - Part1: Current-limiting fuses 2012-11-09 34/170/CD IEC 62504 Ed 1: General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions 2012-09-14 34A/1589/CD IEC 60809 Ed.2 Amend 6: Lamps for road vehicles - Dimensional, electrical and luminous requirements 2012-10-12 34A/1591/CD IEC 60810 Ed.3 Amend 3: Lamps for road vehicles - Performance requirements 2012-10-12 34A/1595/PAS IEC/PAS 62815-1 ed.1: Cold Cathode Fluorescent Lamps - Part 1: Safety Specifications 2012-09-14 34A/1596/PAS IEC/PAS 62815-2 ed.1: Cold Cathode Fluorescent Lamps - Part 2: Performance Specifications 2012-09-14 34A/1597/PAS IEC/PAS 62816-1 ed.1: External Electrode Fluorescent Lamps - Part 1: Safety Specifications 2012-09-14 34A/1598/PAS IEC/PAS 62816-2 ed.1: External Electrode Fluorescent Lamps - Part 2: Performance Specifications 2012-09-14 Page 2 of 7 34A/1600/CDV Amendment 3 to IEC 62035 Ed.1: Discharge lamps (excluding fluorescent lamps) - Safety specifications 2013-01-04 34A/1601/CD IEC 62663-2 Ed.1: Non-ballasted LED lamps - Performance requirements 2012-11-02 34B/1648/CD IEC 60061 f53: Proposal for a new fit BA15d 3 (100°/130°) [IEC 60061-1, -2 and -3] 2012-09-21 34B/1649/CD IEC 60061 f54: Proposal for a new fit G(X)14.5 (IEC 60061-1,-2 and -3) 2012-09-21 34B/1650/CD IEC 60061 f46: Proposal for an introduction of GUZ5.3 cap and lampholder (IEC 60061-1 and -2) 2012-09-21 34C/1022/FDIS IEC 61347-2-9 ed.2: Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding 2012-09-28 fluorescent lamps) 34D/1072/CD IEC 60598-2-20 Ed 4: Luminaires - Part 2-20: Particular requirements - Lighting chains 2012-10-12 35/1302/CD IEC 60086-4/Ed4: Primary batteries - Part 4: Safety of lithium batteries 2012-09-14 38/436A/CD IEC 62689: Current and Voltage sensors or detectors, to be used for fault passage indication purposes - Part 1: General principles and 2012-11-02 requirements 40/2158B/CDV IEC 60393-2 Ed.3: Potentiometers for use in electronic equipment - Part 2: Sectional specification: lead-screw actuated and rotary preset 2012-11-09 potentiometers 40/2159B/CDV IEC 60393-5 Ed.3: Potentiometers for use in electronic equipment - Part 5: Sectional specification: single-turn rotary low-power wirewound 2012-11-09 and non-wirewound potentiometers 40/2160B/CDV IEC 60393-6 Ed.2: Potentiometers for use in electronic equipment - Part 6: Sectional specification: Surface mount preset potentiometers 2012-11-09 44/667A/CD IEC/TS 61496-4-3 Ed.1.Safety of machinery - Electro-sensitive protective equipment - Part 4-3: Particular requirements for equipment 2012-11-02 using vision based protective devices (VBPD) - additional requirements when using stereo techniques (VBPDST) 45A/886/FDIS IEC 62646 Ed.1: Nuclear power plants - Control rooms - Computer based procedures 2012-09-07 45A/887/FDIS IEC/IEEE 62582-3: Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring 2012-09-28 methods - Part 3: Elongation at break Page 3 of 7 45B/739/FDIS IEC 62755 Ed.1: Radiation protection instrumentation - Data format for radiation instruments used in the detection of illicit trafficking of 2012-09-28 radioactive materials 47A/888/CD IEC 62132-1: Integrated circuits - Measurement of electromagnetic immunity Part 1: General conditions and definitions 2012-10-12 47F/125/CD IEC 62047-16, Ed.1: Semiconductor devices - Micro-electromechanical devices - Part 16: Test methods for determining residual stresses of 2012-09-28 MEMS films - Wafer curvature and cantilever beam deflection methods 48B/2310/CD IEC 60512-29-100 Ed 1.0: Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 500 2012-10-19 MHz on M12 style connectors - Tests 29a to 29g 48B/2311/CD IEC 60512-1-101 Ed 1.0: Connectors for electronic equipment - Tests and measurements - Part 1-101: Blank detail specification 2012-10-26 49/1004/CDV IEC 60444-6 Ed.2: Measurement of quartz crystal unit parameters - Part 6 : Measurement of drive level dependence (DLD) 2013-01-04 51/1005/FDIS IEC 62358 Ed.2: Ferrite cores - Standard inductance factor for gapped cores and its tolerance 2012-09-14 51/1006/FDIS IEC 62674-1 Ed.1: High frequency inductive components - Part 1: Fixed surface mount inductors for use in electronic and 2012-09-14 telecommunication equipment 56/1476/FDIS IEC 62551/Ed1: Analysis techniques for dependability - Petri net techniques 2012-09-07 56/1479/PAS IEC/PAS 62814/Ed1: Dependability of Software Products Containing Reusable Components - Guidance for Functionality and Tests 2012-09-14 57/1263/CDV IEC 61970-453 Ed.2: Energy Management System Application Program Interface (EMS-API) - Part 453: Diagram Layout Profile 2013-01-04 57/1271/CDV IEC 61970-452 Ed.1: Energy Management System Application Program Interface (EMS-API) - Part 452: CIM Static Transmission Network 2013-01-04 Model Profiles 57/1272/FDIS IEC 61968-1 Ed.2: Application integration at electric utilities - System interfaces for distribution management - Part 1: Interface architecture 2012-09-28 and general recommendations 59A/168A/CD IEC 60436 Ed.4: Electric dishwashers for household use - Methods for measuring the performance (clarificatin on closing date for 2012-08-10 comments) 62A/824/FDIS Amendment 1 to IEC 60601-1-8: Medical electrical equipment - Part 1-8: General requirements for basic safety and essential performance - 2012-09-28 Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems Page 4 of 7 62B/888/FDIS IEC 60601-2-63: Medical electrical equipment - Part 2-63:Particular requirements for the basic safety and essential performance of dental 2012-09-07 extra-oral X-ray equipment 62B/889/FDIS IEC 60601-2-65: Medical electrical equipment - Part 2-65: Particular requirements for the basic safety and essential performance of dental 2012-09-07 intra-oral X-ray equipment 62D/1026/FDIS IEC 60601-2-24: Medical electrical equipment - Part 2-24: Particular requirements for basic safety and essential performance of infusion 2012-09-21 pumps and controller 64/1841/CD IEC 60364-7-753: Low-voltage electrical installations - Part 7-753: Requirements for special installations or locations - Heating cables and 2012-10-19 embedded heating systems 69/219/CD IEC 61851-1/Ed. 3: Electric vehicle conductive charging system - Part 1: General requirements 2012-10-12 69/220/CD IEC 61851-21-2/Ed.1: Electric vehicle conductive charging system -Part 21-2:EMC requirements for OFF board electric vehicle charging 2012-10-12 systems 76/474/CD IEC 60825-1: Safety of laser products - Part 1: Equipment classification and requirements 2012-09-21 78/959/CD IEC 61481-1: Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kv a.c.
Load more

Recommended publications
  • IEC-International Electrotechnical Commission
    Standards Manager Web Standards List IEC-International Electrotechnical Commission Id Number Title Year Organization Page 1 60034-2-3 Rotating electrical machines _ Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC 2020 IEC motors - Edition 1.0 2 60034-3 Rotating electrical machines _ Part 3: Specific requirements for synchronous generators driven by steam turbines or 2020 IEC combustion gas turbines and for synchronous compensators - Edition 7.0 3 60034-5 Rotating electrical machines _ Part 5: Degrees of protection provided by the integral design of rotating electrical machines 2020 IEC (IP code) _ Classification - Edition 5.0 4 60034-7 Rotating electrical machines _ Part 7: Classification of types of construction, mounting arrangements and terminal box 2020 IEC position (IM Code) - Edition 3.0 5 60034-11 Rotating electrical machines _ Part 11: Thermal protection - Edition 3.0 2020 IEC 6 60034-18-42 Rotating electrical machines _ Part 18-42: Partial discharge resistant electrical insulation systems (Type II) used in rotating 2020 IEC electrical machines fed from voltage converters _ Qualification tests - Edition 1.1; Consolidated Reprint 7 60045-1 Steam turbines _ Part 1: Specifications - Edition 2.0 2020 IEC 8 60050-113 NULL 2020 IEC AMD 2 9 60050-113 AMENDMENT 3 International Electrotechnical Vocabulary (IEV) _ Part 113: Physics for electrotechnology - Edition 1.0 2020 IEC AMD 3 10 60050-151 AMENDMENT 4 International Electrotechnical Vocabulary (IEV) _ Part 151: Electrical and magnetic devices
    [Show full text]
  • Nr. Standard Reference Title 1 IEC 60317-4:2015
    Nr. Standard reference Title Specifications for particular types of winding wires - Part 4: Solderable 1 IEC 60317-4:2015 polyurethane enamelled round copper wire, class 130 Appliance couplers for household and similar general purposes - Part 1: 2 IEC 60320-1:2015 General requirements Amendment 1 - Low-voltage electrical installations – Part 4-44: Protection IEC 60364-4- 3 for safety – Protection against voltage disturbances and electromagnetic 44:2007/AMD1:2015 PRV disturbances IEC 60364-5- Amendment 2 - Electrical installations of buildings – Part 5-53: Selection 4 53:2001/AMD2:2015 PRV and erection of electrical equipment – Isolation, switching and control Corrigendum 1 - High-voltage swithgear and controlgear - Part 200: AC IEC 62271- 5 metal-enclosed switchgear and controlgear for rated voltages above 1 kV 200:2011/COR1:2015 and up to and including 52 kV IEC/IEEE 62271-37- High-voltage switchgear and controlgear – Part 37-013: Alternating-current 6 013:2015 PRV generator circuit-breakers Photobiological safety of lamps and lamp systems - Part 5: Image 7 IEC 62471-5:2015 projectors LEDsi lamps for general lighting services with supply voltages not 8 IEC 62838:2015 PRV exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. – Safety specifications IEC Corrigendum 1 - Amendment 1 - Self-ballasted LED-lamps for general 9 62560:2011/AMD1:2015/CO lighting services by voltages >50 V - Safety specifications R1:2015 Electrical installations for lighting and beaconing of aerodromes – Safety 10 IEC 62870:2015 PRV secondary circuits in series circuits
    [Show full text]
  • SAV4118 Layout
    PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 41, #18 April 30, 2010 Contents American National Standards Call for Comment on Standards Proposals ................................................. 2 Call for Comment Contact Information ........................................................ 17 Call for Members (ANS Consensus Bodies)................................................ 19 Final Actions .................................................................................................. 23 Project Initiation Notification System (PINS)............................................... 25 International Standards ISO Draft Standards....................................................................................... 31 ISO Newly Published Standards................................................................... 32 Proposed Foreign Government Regulations................................................. 33 Information Concerning .................................................................................. 34 American National Standards Call for comment on proposals listed This section solicits public comments on proposed draft new Ordering Instructions for "Call-for-Comment" Listings American National Standards, including the national adoption of 1. Order from the organization indicated for the specific ISO and IEC standards as American National Standards, and on proposal. proposals to revise, reaffirm or withdraw approval of existing American National Standards. A draft
    [Show full text]
  • IEC 60601-1 Medical Electrical Equipment Part 1: General Requirements for Basic Safety and Essential Performance Report Reference No
    12 Test Report issued under the responsibility of: IEC 60601-1 Medical electrical equipment Part 1: General requirements for basic safety and essential performance Report Reference No. ..................... : 161100155SHA-001 Date of issue ................................... : 2017-01-06 Total number of pages ................... : 181 CB Testing Laboratory ................... : Intertek Testing Services Shanghai Address ........................................... : Building No.85 and 86, 1198 Qinzhou Road (North), 200233 Shanghai, China Applicant’s name ............................ : GlobTek, Inc. Address ........................................... : 186 Veterans Dr. Northvale, NJ 07647 USA Test specification: Standard .......................................... : IEC 60601-1:2005 (Third Edition) + CORR. 1:2006 + CORR. 2:2007 + A1:2012 (or IEC 60601-1: 2012 reprint) Test procedure................................ : CB Scheme Non-standard test method………..: N/A Test Report Form No. ..................... : IEC60601_1K Test Report Form Originator ......... : UL(US) Master TRF ...................................... : 2015-11 Copyright © 2015 Worldwide System for Conformity Testing and Certification of Electrotechnical Equipment and Components (IECEE), Geneva, Switzerland. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. If this Test Report Form is used by non-IECEE members, the IECEE/IEC logo and the reference to the CB Scheme procedure shall be removed. This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02. General disclaimer: The test results presented in this report relate only to the object tested.
    [Show full text]
  • Zephyr Overview 091520.Pdf
    Zephyr Project: Unlocking Innovation with an Open Source RTOS Kate Stewart @_kate_stewart [email protected] Copyright © 2020 The Linux Foundation. Made avaiilable under Attribution-ShareAlike 4.0 International Zephyr Project Open Source, RTOS, Connected, Embedded • Open source real time operating system Fits where Linux is too big • Vibrant Community participation • Built with safety and security in mind • Cross-architecture with broad SoC and Zephyr OS development board support. 3rd Party Libraries • Vendor Neutral governance Application Services • Permissively licensed - Apache 2.0 OS Services • Complete, fully integrated, highly Kernel configurable, modular for flexibility HAL • Product development ready using LTS includes security updates • Certification ready with Auditable Products Running Zephyr Today Grush Gaming hereO Proglove Rigado IoT Gateway Distancer Toothbrush Smartwatch Ellcie-Healthy Smart Intellinium Safety Anicare Reindeer GNARBOX 2.0 SSD Adero Tracking Devices Sentrius Connected Eyewear Shoes Tracker GEPS Point Home Alarm RUUVI Node HereO Core Box Safety Pod Zephyr Supported Hardware Architectures Cortex-M, Cortex-R & Cortex-A X86 & x86_64 32 & 64 bit Xtensa Coming soon: Native Execution on a POSIX-compliant OS • Build Zephyr as native Linux application • Enable large scale simulation of network or Bluetooth tests without involving HW • Improve test coverage of application layers • Use any native tools available for debugging and profiling • Develop GUI applications entirely on the desktop • Optionally connect
    [Show full text]
  • Page 1 of 24 Current Standards Activities 11/10/2011 Http
    Current Standards Activities Page 1 of 24 Browse By Group: View All 6 New Publications | Supplements | Amendments | Errata | Endorsements | Reaffirmations | Withdrawals | Formal Interpretations | Informs & Certification Notices | Previous Reports Last updated: November 10, 2011 New Publications This section lists new standards, new editions (including adoptions), and special publications that have been recently published. Clicking on "View Detail" will display the scope of the document and other details available on CSA’s Online store. Program Standard Title Date Posted Scope Electrical / CAN/CSA-C22.2 NO. Safety of household and similar appliances - Part 1: General 11/8/2011 View Detail Electronics 60335-1-11 requirements Tri-national standard, with NMX-J-521/1-ANCE and UL 60335-1 Electrical / CAN/CSA-C22.2 NO. Appareils électrodomestiques et analogues - Sécurité - Partie 1: 11/8/2011 View Detail Electronics 60335-1-11 Prescriptions generals norme trinationale avec NMX-J-521/1-ANCE et UL 60335-1 Construction ASME A112.19.5- Flush valves and spuds for water closets, urinals, and tanks 11/8/2011 View Detail Products and 2011/CSA-B45.15-11 Materials http://standardsactivities.csa.ca/standardsactivities/recent_infoupdate.asp 11/10/2011 Current Standards Activities Page 2 of 24 Construction ASSE 1016- Performance requirements for automatic compensating valves for 11/8/2011 View Detail Products and 2011/ASME individual showers and tub/shower combinations Materials A112.1016-2011/CSA B125.16-11 Energy C823-11 Rendement des appareils de traitement
    [Show full text]
  • International Standard Iec 60601-1
    INTERNATIONAL IEC STANDARD 60601-1 Third edition 2005-12 Medical electrical equipment – Part 1: General requirements for basic safety and essential performance This English-language version is derived from the original bilingual publication by leaving out all French-language pages. Missing page numbers correspond to the French- language pages. Reference number IEC 60601-1:2005(E) Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers 1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content reflects current technology. Information relating to this publication, including its validity, is available in the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in progress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued, is also available from the following: • IEC Web Site (www.iec.ch) • Catalogue of IEC publications The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to search by a variety of criteria including text searches, technical committees and date of publication.
    [Show full text]
  • Page 1 of 25 Current Standards Activities 9/16/2011 Http
    Current Standards Activities Page 1 of 25 Browse By Group: View All New Publications | Supplements | Amendments | Errata | Endorsements | Reaffirmations | Withdrawals | Formal Interpretations | Informs & Certification Notices | Previous Reports Last updated: September 16, 2011 New Publications This section lists new standards, new editions (including adoptions), and special publications that have been recently published. Clicking on "View Detail" will display the scope of the document and other details available on CSA’s Online store. Program Standard Title Date Posted Scope Electrical / C22.2 No. 0.22-11 Evaluation Methods for Arc Resistance Ratings of Enclosed Electrical 9/15/2011 View Detail Electronics Equipment Energy F378 SERIES-11 Solar collectors 9/12/2011 View Detail Contains Standards F378.1 and F378.2 Gas Equipment ANSI Z21.41- Quick Disconnect Devices For Use With Gas Fuel Appliances 9/12/2011 View Detail 2011/CSA 6.9-2011 Gas Equipment ANSI Z21.63- Portable Type Gas Camp Heaters 9/12/2011 View Detail 2011/CSA 11.3-2011 http://standardsactivities.csa.ca/standardsactivities/recent_infoupdate.asp 9/16/2011 Current Standards Activities Page 2 of 25 Gas Equipment ANSI Z21.72- Portable type gas camp stoves 9/12/2011 View Detail 2011/CSA 11.2-2011 Gas Equipment ANSI Z21.73- Portable type gas camp lights 9/12/2011 View Detail 2011/CSA 11.1-2011 Life Sciences Z94.4-11 Selection, use, and care of respirators 9/12/2011 View Detail Construction CAN/CSA-ISO Welding consumables - Wire electrodes and weld deposits for gas 9/12/2011 View Detail Products and 14341:11 shielded metal arc welding of non alloy and fine grain steels - Materials Classification Adopted ISO 14341:2010, second edition, 2010-02-15 Construction CAN/CSA-ISO Produits consommables pour le soudage - Fils-électrodes et métaux 9/12/2011 View Detail Products and 14341:11 d'apport déposés en soudage à l'arc sous protection gazeuse des aciers Materials non alliés et à grains fins - Classification norme ISO 14341:2010 adoptée, deuxième édition, 2010-02-15 Electrical / CAN/CSA-C22.2 NO.
    [Show full text]
  • Standards for Enabling Trade— Mapping and Gap Analysis Study
    Standards for Enabling Trade— Mapping and Gap Analysis Study An IA-CEPA Early Outcomes Initiative November 2017 Standards For Enabling Trade—Mapping and Gap Analysis Study 2 An IA-CEPA Early Outcomes Initiative – November 2017 Contents ListofFigures..............................................................................................................3 Abbreviations...............................................................................................................4 Terms..........................................................................................................................6 Acknowledgements......................................................................................................8 ExplanatoryNotes........................................................................................................8 Foreword.....................................................................................................................9 Recommendations.....................................................................................................10 ExecutiveSummary....................................................................................................11 Introduction................................................................................................................13 ProjectPurpose.........................................................................................................13 Objectives..................................................................................................................13
    [Show full text]
  • Mitigating Risk with IEC 62304 and Proven Medical Device Software
    System Design Considerations for Medical Device Manufacturers Jim McElroy Mark Prowten Director, Medical Director, OEM Embedded Industry Business Wireless, Silex Development, Green Hills Technology America Software © 2011 Green Hills Software, Inc. and Silex Technology , Inc. Slide 1 The Medical Device Manufacturer’s Goal Deliver innovative yet safe, effective and secure medical devices to market cost effectively © 2011 Green Hills Software, Inc. and Silex Technology , Inc. Slide 2 Device Development Challenges Regulatory - Increased oversight, regulation, and most important – Accountability . U.S. Medical Device Accountability Act most definitely will affect how software will be developed in the future . Submissions: FDA 510(k), PMA . Standards: IEC 62304, IEC 60601, ISO 14971, IEC 61508, IEC 62366 Technical - Medical devices are becoming increasingly complex . More capable, more connectivity, requiring less power, smaller footprint, lower cost to produce . More security, reliability, and safety . Many of these forces work against each other ( ex. security and safety vs. innovation and interoperability) © 2011 Green Hills Software, Inc. and Silex Technology , Inc. Slide 3 Client Applications – Connectivity on the Rise Anesthesia Hospital beds Automated External Defibrillator Medical dispensing (AED) Radiography Blood Analyzers Computed Tomography Imaging Ventilator (CT) Dialysis Positron Emission Tomography Infusion pumps Imaging (PET) Glucose monitoring Ultrasound Imaging Patient monitoring Respirator Surgical Navigation Sleep apnea Imaging Magnetic Resonance Imaging (MRI) © 2011 Green Hills Software, Inc. and Silex Technology , Inc. Slide 4 Technical Considerations Device Safety Classification – Class II, III Software Safety Classification under IEC 62304 – Class A, B, or C Security concerns Architecture of the device Leveraging SOUP in medical devices Power and mobility considerations Device Connectivity and Interoperability – Wired and/or Wireless .
    [Show full text]
  • Developing Open-Source Software RTOS with Functional Safety in Mind ? Anas Nashif, Intel Open-Source Technology Center Disclaimer
    Developing Open-Source Software RTOS with Functional Safety in Mind ? Anas Nashif, Intel Open-Source Technology Center Disclaimer: I am not a safety expert. Credit: https://unsplash.com/@rawpixel Can open-source software be used for Functional Safety? • Short answer is yes, using open-source software is very common, in all areas • But… • Open-source software usually require major transformation before it can be used • Mostly such transformation happens behind closed doors (if license allows that) • Complete disconnect between original source and “certified” code • Transformation of open-source code to be functionally safe is “expensive” • Following standards very early in a project life-cycle is key • There are many standards… Safety Standards “The nice thing about standards is that there are so many of them to choose from.” [Tanenbaum] Is this possible? Example: RTOS • Open source implementation • Small trusted code base (in terms of LoC) • Safety oriented architecture • Built in security model • POSIX compliant C library • Supports deterministic thread scheduling • Supports multi-core thread scheduling • Proof that ISO compliant development was done • Accountability for the implementation • Industry Adoption • Certification friendly interfaces Cathedral and the Bazaar • Open-source Software is not a problem in itself • It is difficult to map a stereotypical open-source development to the V- model • Specification of features • Comprehensive documentation • Traceability from requirements to source code • Number of committers and information known about them • Certification authority not familiar with open-source development V-Model: Software Development Quality Matters • Quality is a mandatory expectation for software across the industry. ... • Software Quality is not an additional requirement caused by functional ..
    [Show full text]
  • 60601 Checklist 1 Intro Rev33
    60601 Clause Checklist, Rev. 33 (05/2005) Medical Evaluation Package (IEC 60601-1 with National Deviations) IEC 60601-1, UL 60601-1, CSA C22.2 No. 601.1, EN 60601-1 (With National Deviations) Company: Contact: Product Type: Phone: Model: Email: Ratings: V, Hz, A, W VA Bat. BATTERY INSULATION DIAGRAM Table: to insulation diagram Area Insulation Reference Required Required Measured Measured Dielectric Remarks BOP, BI, SI, voltage creepage clearance creepage clearance Voltage DI/RI (V) (mm) (mm) (mm) (mm) (kV) A B C D E F G H I J K L M N O P MECA - Medical Equipment Compliance Associates, LLC (Download at http://60601-1.com/documents.htm ) Compiled by Brian R. Biersach 1 60601 Clause Checklist, Rev. 33 (05/2005) Medical Evaluation Package (IEC 60601-1 with National Deviations) EVALUATION PROCEDURE: Overall equipment description, accessories to equipment, area(s) equipment will be used , intended power supply, overall objectives ¡ ¡ MECA Project Proposal (Quote) ¡ PO # from Client to open project ¡ Preliminary i nvestigation ¡ Anticipated date samples will be ready for testing ¡ Anticipated equipment production date ¡ UL L-37 & L-40 forms signed Conduct Preliminary Evaluation to Identify Potential Noncompliances and Determine Critical Components and Test Plan ¡ Examine equipment, discuss its use, accessories, interconnection to other equipment, construction materials ¡ Determine if collateral or particular standards are required (See list of Collateral & Particular Standards) ¡ Document Classification of equipment (Per Clause 5) ¡ Examine
    [Show full text]