DOCSLIB.ORG

Mikuni Hsr40 Hsr42 Hsr45 Jet Assortments

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Mikuni Hsr40 Hsr42 Hsr45 Jet Assortments MIKUNI CARBURETOR JETS MIKUNI 4/042 TYPE MAIN JET SHOP KITS MIKUNI VM28/486 TYPE K&L carries a variety of Mikuni type main PILOT JETS jets to fit most popular motorcycles. These Sold pk/5. TOOLS high precision brass jets meet OEM 18-4739 #15 18-4749 #30 specifications. Made in Japan. 18-4742 #17.5 18-4750 #35 KITS INCLUDE QTY-1/PK(of 5) of the sizes listed. #20 #40 SHOP EQUIPMENT 18-4743 18-4751 Each jet size also Sold in Pk/5, (see below). 18-4745 #22.5 18-4752 #45 18-4747 #25 18-4753 #50 18-9202 18-4748 #27.5 TYPE JET K&L P/N QTY/JET JET SIZES INCREMENTS Mikuni Large Hex 18-9201 Pk/5 130 ~ 205 5 Mikuni Large Hex 18-9202 Pk/5 210 ~ 370 10 MIKUNI BS30/96 TYPE PILOT JETS CV Carbs. Sold pk/5.. MIKUNI 4/042 TYPE LARGE HEX MAIN JETS 18-4818 #30 18-4824 #45 HARD PARTS NOTE: K&L jets are sold pk/5, O.E.M. Sold each 18-4819 #32.5 18-4826 #47.5 18-4820 #35 18-4828 #50 K&L(Pk/5) SIZE 18-4821 #37.5 18-4829 #52.5 18-4412 #115 18-4822 #40 18-4830 #55 18-4413 #120 18-4415 #130 18-4823 #42.5 18-4416 #135 18-4417 #140 18-4412 18-4418 #145 MIKUNI N102/221 TYPE #150 18-4419 K&L(Pk/5) SIZE O.E.M.(ea.) SMALL ROUND MAIN JETS 18-4420 #155 18-4441 #310 18-4533 Sold pk/5. 18-4421 #160 18-4442 #320 18-4531 18-4720 #110 18-4730 #135 CARB & FUEL CARB 18-4422 #165 18-4443 #330 18-4529 18-4423 #170 18-4721 #112.5 18-4731 #137.5 18-4444 #340 18-4527 18-4424 #175 18-4722 #115 18-4732 #140 18-4445 #350 18-4525 18-4425 #180 18-4723 #117.5 18-4733 #142.5 18-4446 #360 ——— 18-4426 #185 18-4724 #120 18-4734 #145 18-4447 #370 18-4523 18-4427 #190 18-4725 #122.5 18-4735 #147.5 18-4448 #380 18-4516 18-4428 #195 18-4726 #125 18-4736 #150 18-4449 #390 18-4515 18-4429 #200 18-4728 #130 18-4715 18-4450 #400 18-4511 18-4430 #205 18-4451 #410 18-4501 18-4431 #210 18-4452 #420 18-4371 18-4432 #220 ——— #430 18-4397 MIKUNI VM22/210 TYPE 18-4433 #230 ——— #440 18-4399 18-4434 #240 PILOT JETS ——— #450 18-4348 18-4435 #250 Sold pk/5. IGNITION/ELECTRICAL ——— #460 18-4499 18-4436 #260 18-4660 #15 18-4363 #40 ——— #470 18-4498 18-4437 #270 18-4661 #20 18-4364 #45 ——— #480 18-4497 18-4438 #280 #25 #50 ——— #490 18-4495 18-4360 18-4365 18-4439 #290 #30 #55 ——— #500 18-4492 18-4361 18-4366 18-4660 18-4440 #300 18-4362 #35 MIKUNI N100/604 TYPE LARGE ROUND MAIN JETS MIKUNI N151.067 TYPE CONTROL NOTE: K&L jets are sold pk/5 PILOT JETS O.E.M. are sold each. CV Carbs. Sold pk/5. K&L(Pk/5) SIZE O.E.M.(ea.) 18-4368 #90 ——— 18-4832 #30 18-4836 #40 18-4370 #95 ——— 18-4833 #32.5 18-4837 #42.5 18-4372 #100 ——— 18-4834 #35 18-4838 #45 18-4373 #102.5 ——— 18-4368 18-4835 #37.5 18-4839 #47.5 18-4374 #105 18-4491 18-4375 #107.5 18-4490 K&L(Pk/5) SIZE O.E.M.(ea.) KEIHIN MAIN JET SHOP KITS 18-4376 #110 18-4489 18-4388 #140 18-4028 K&L carries a variety of Keihin 18-4377 #112.5 18-4488 18-4389 #142.5 18-4004 type type main jets for most SUSPENSION 18-4378 #115 18-4487 18-4390 #145 18-4014 popular motorcycles. These 18-4379 #117.5 18-4485 18-4391 #147.5 18-4017 high precision brass jets meet or 18-4380 #120 18-4349 18-4392 #150 18-4018 exceed OEM specifications. 18-4381 #122.5 ——— 18-4394 #155 ——— Made in Japan. 18-4382 #125 18-4350 18-4395 #157.5 ——— 18-4383 #127.5 18-4351 18-4396 #160 ——— NOTE: Each jet size in kit comes 18-4384 #130 18-4352 18-4398 #165 ——— in pk/5. 18-4385 #132.5 18-4369 18-4400 #170 ——— 18-9199 18-4386 #135 18-4026 18-4402 #175 ——— 18-4387 #137.5 18-4027 18-4404 #180 ——— TYPE JET K&L P/N QTY/JET JET SIZES INCREMENTS Keihin Hex 18-9199 Pk/5 125 ~ 175 5 ACCESSORIES Keihin Hex 18-9200 Pk/5 122 ~ 172 4 or 6 Keihin Round 18-9197 Pk/5 90 ~ 150 5 Keihin Round 18-9198 Pk/5 88 ~ 148 4 or 6 800.727.6767262 carb & fuel 1-800-727-6767 | kLsupply.com KEIHIN CARBURETOR JETS SHOP EQUIPMENT MOTION PRO JET WRENCHES TOOLS These steel jet wrenches have a rubber snap-off lid over a storage area for extra jets. Handle is 35-4180 35-4182 knurled for secure grip. Sold each. 35-4180 Motion Pro Jet Wrench for 6mm round jets 35-4182 Motion Pro Jet Wrench for 6mm hex jets KEIHIN 99101-393 TYPE KEIHIN 99101-357 TYPE ROUND MAIN JETS KEIHIN OE TYPE SLOW JET HEX MAIN JETS Honda VB, VD and VE series. CR, FCR, PJ, PWK, PWM, PE, PD, Honda 12- 2 type. Commonly found in All Honda and Kawasaki CV & HARD PARTS CL/CB Twins and Harley®. CVK series. Some Honda PD and K&L(Pk/5) SIZE K&L(Pk/100) NOTE: K&L jets are sold pk/5 PE series. Main Air Jet for FCR. 18-3783 #35 18-4596 O.E.M. are sold each. NOTE: K&L jets are sold pk/5 18-3784 #38 18-4597 O.E.M. are sold each. 18-3785 #40 18-4598 K&L(Pk/5) SIZE O.E.M.(ea.) 18-3786 #42 18-4599 18-4550 #100 ——— K&L(Pk/5) SIZE O.E.M.(ea.) 18-4552 #105 ——— 18-4512 #90 ——— KEIHIN OE TYPE KEIHIN 99101-187 TYPE 18-4554 #110 ——— 18-4514 #95 ——— SLOW JET HEX MAIN JETS 18-4556 #115 ——— ——— #98 18-4481 #120 Honda 12- 0 type. Commonly found in Z50R, CRF50F 18-4558 ——— ——— #100 18-4453 #125 & FUEL CARB Commonly found in and many 50cc Scooter models. 18-4560 ——— ——— #102 18-4414 CB350/00/ 550F and K&L(Pk/10) SIZE K&L(Pk/10) SIZE 18-4561 #128 ——— 18-4518 #105 18-4411 18-4562 #130 ——— CB50K models. 18-9785 #55 18-9790 #70 ——— #108 18-4410 18-4563 #132 ——— K&L(Pk/10) SIZE 18-9786 #58 18-9791 #75 18-4520 #110 18-4409 18-4564 #135 ——— 18-4858 #38 18-9787 #62 18-9792 #78 ——— #112 18-4408 18-4566 #140 ——— 18-4859 #40 18-9788 #65 18-9793 #80 18-4522 #115 18-4407 18-4568 #145 ——— 18-4862 #42 18-9789 #68 ——— #118 18-4406 18-4569 #148 ——— 18-4524 #120 18-4405 KEYSTER PRESSFIT JETS 18-4570 #150 ——— ——— #122 18-4403 The ester press fit jets are designed to allo a ualified mechanic to 18-4571 #152 ——— 18-4526 #125 18-4401 IGNITION/ELECTRICAL replace the pressed in slo jet found in man ’s and ’s onda models 18-4572 #155 ——— ——— #128 18-4484 CB ours are just a fe of the models that use the pressed in 18-4573 #158 ——— 18-4528 #130 18-4482 lo et These jets are not aailale from onda This can sae a caruretor 18-4574 #160 18-4311 18-4530 #135 ——— alloing the slo jet to e remoed for proper car od cleaning and 18-4575 #162 18-4312 18-4532 #140 ——— then e replaced ith a rand ne jet upon reasseml old in pacs of 18-4576 #165 18-4313 18-4534 #145 ——— K&L(Pk/5) DESCRIP TYPE 18-4577 #168 18-4314 18-4536 #150 ——— 18-4538 #155 ——— 18-5862 Press Fit #35 Slow Jet 47 18-4578 #170 18-4325 18-4540 #160 ——— 18-5863 Press Fit #38 Slow Jet 47 18-4579 #172 18-4326 18-5864 Press Fit #40 Slow Jet 47 18-4580 #175 18-4328 #178 18-5865 Press Fit #42 Slow Jet 47 Type 47 18-4581 18-4459 18-4582 #180 18-4458 KEIHIN N424-25 TYPE 18-5866 Press Fit #45 Slow Jet 47 ——— #182 18-4457 18-5915 Press Fit #35 Slow Jet 49 SLOW JET 18-4584 #185 18-4456 CONTROL 18-5916 Press Fit #38 Slow Jet 49 ——— #188 18-4455 18-5917 Press Fit #40 Slow Jet 18-4586 #190 18-4454 18-5918 Press Fit #42 Slow Jet 49 Type 49 18-4590 #200 ——— 18-5919 Press Fit #45 Slow Jet 49 KEIHIN N424-21 TYPE KEIHIN TYPE SLOW For Harley-Keihin, Kawasaki CV, JETS N424-26 CVK and FCR carbs SLOW JET NOTE: K&L jets are sold pk/5. PJ, PWK, PWM, PE20/22 and For VB, VD carbs. Sold pk/5. O.E.M. are sold each. some smoothbores. K&L(Pk/5) SIZE K&L(Pk/5) SIZE NOTE: K&L jets are sold pk/5 18-4802 #40 18-4809 #58 K&L(Pk/5) SIZE O.E.M.(ea.) O.E.M. are sold each. 18-4803 #42 18-4812 #60 18-4783 #35 18-4478 SUSPENSION K&L(Pk/5) SIZE O.E.M.(ea.) 18-4804 #45 18-4813 #62 18-4784 #38 18-4480 18-4754 #35 ——— 18-4805 #48 18-4814 #65 18-4785 #40 18-4477 18-4755 #38 18-4464 18-4806 #50 18-4815 #68 18-4786 #42 18-4476 18-4756 #40 18-4463 18-4808 #55 18-4817 #70 18-4787 #45 18-4470 18-4759 #42 18-4462 18-4788 #48 18-4469 18-4763 #45 18-4461 18-4789 #50 ——— 18-4765 #48 18-4460 ——— #52 18-4466 18-4768 #50 18-4547 ——— #55 18-4465 18-4771 #52 18-4546 PILOT JETS for YAMAHA 18-4792 #58 ——— 18-4772 #55 18-4539 18-4795 #65 ——— HITACHI CARBS 18-4798 #70 ——— ACCESSORIES 18-4776 #58 18-4339 Made in Japan.
Load more

Recommended publications
  • Auto Parts Canadian Settlements
    AUTO PARTS CANADIAN SETTLEMENTS Settlement Amount Action Settled Defendant(s) (CDN) Approved Hearing Date (unless otherwise indicated) Air Conditioning DENSO Corporation et al $4,943,000 Feb 28/20 n/a Systems Panasonic Corporation et al $126,000 n/a May 13/21 Marelli Corporation (f/k/a $878,935.99 n/a May 13/21 Calsonic Kansei Corporation) et al Air Flow Meters Hitachi, Ltd., et al $725,000 May 1/17 n/a DENSO Corporation et al $150,000 Feb 28/20 n/a Alternators Hitachi, Ltd., et al $950,000 May 1/17 n/a Mitsubishi Electric $2,200,000 Sept 21/18 n/a Corporation et al DENSO Corporation et al $5,120,000 Feb 28/20 n/a ATF Warmers and Oil T.RAD Co., Ltd. et al $113,476.33 Jun 19/18 n/a Coolers DENSO Corporation et al $302,000 Feb 28/20 n/a Marelli Corporation (f/k/a $64,867.52 n/a May 13/21 Calsonic Kansei Corporation) et al Autolights Mitsuba Corporation et al $150,000 May 28/19 n/a Koito Manufacturing Co., $3,666,000 Aug 27/20 n/a Ltd. et al. Automotive Brake Hitachi Metals, Ltd. et al $175,000 Feb 28/20 n/a Hoses Toyoda Gosei Co., Ltd. $97,419.03 Aug 27/20 n/a Automotive Constant- Toyo Tire & Rubber Co., $258,969.19 Aug 27/20 n/a Velocity-Joint Boot Ltd. et al Products Toyoda Gosei Co., Ltd. $105,846.66 Aug 27/20 n/a Automotive Exhaust DENSO Corporation et al $150,000 Feb 28/20 n/a Systems NGK Spark Plugs (U.S.A.), $66,510 Feb 28/20 n/a Inc., et al Eberspächer Gruppe GmbH $190,000 Aug 27/20 n/a & Co.
    [Show full text]
  • Published on 7 October 2016 1. Constituents Change the Result Of
    The result of periodic review and component stocks of TOPIX Composite 1500(effective 31 October 2016) Published on 7 October 2016 1. Constituents Change Addition( 70 ) Deletion( 60 ) Code Issue Code Issue 1810 MATSUI CONSTRUCTION CO.,LTD. 1868 Mitsui Home Co.,Ltd. 1972 SANKO METAL INDUSTRIAL CO.,LTD. 2196 ESCRIT INC. 2117 Nissin Sugar Co.,Ltd. 2198 IKK Inc. 2124 JAC Recruitment Co.,Ltd. 2418 TSUKADA GLOBAL HOLDINGS Inc. 2170 Link and Motivation Inc. 3079 DVx Inc. 2337 Ichigo Inc. 3093 Treasure Factory Co.,LTD. 2359 CORE CORPORATION 3194 KIRINDO HOLDINGS CO.,LTD. 2429 WORLD HOLDINGS CO.,LTD. 3205 DAIDOH LIMITED 2462 J-COM Holdings Co.,Ltd. 3667 enish,inc. 2485 TEAR Corporation 3834 ASAHI Net,Inc. 2492 Infomart Corporation 3946 TOMOKU CO.,LTD. 2915 KENKO Mayonnaise Co.,Ltd. 4221 Okura Industrial Co.,Ltd. 3179 Syuppin Co.,Ltd. 4238 Miraial Co.,Ltd. 3193 Torikizoku co.,ltd. 4331 TAKE AND GIVE. NEEDS Co.,Ltd. 3196 HOTLAND Co.,Ltd. 4406 New Japan Chemical Co.,Ltd. 3199 Watahan & Co.,Ltd. 4538 Fuso Pharmaceutical Industries,Ltd. 3244 Samty Co.,Ltd. 4550 Nissui Pharmaceutical Co.,Ltd. 3250 A.D.Works Co.,Ltd. 4636 T&K TOKA CO.,LTD. 3543 KOMEDA Holdings Co.,Ltd. 4651 SANIX INCORPORATED 3636 Mitsubishi Research Institute,Inc. 4809 Paraca Inc. 3654 HITO-Communications,Inc. 5204 ISHIZUKA GLASS CO.,LTD. 3666 TECNOS JAPAN INCORPORATED 5998 Advanex Inc. 3678 MEDIA DO Co.,Ltd. 6203 Howa Machinery,Ltd. 3688 VOYAGE GROUP,INC. 6319 SNT CORPORATION 3694 OPTiM CORPORATION 6362 Ishii Iron Works Co.,Ltd. 3724 VeriServe Corporation 6373 DAIDO KOGYO CO.,LTD. 3765 GungHo Online Entertainment,Inc.
    [Show full text]
  • Auto Parts Price-Fixing Class Actions Between 1995 and 2021, Did You Or Your Company
    PROPOSED SETTLEMENTS IN CANADIAN AUTO PARTS PRICE-FIXING CLASS ACTIONS BETWEEN 1995 AND 2021, DID YOU OR YOUR COMPANY: 1. Purchase and/or lease, directly or indirectly, a new or used automotive vehicle in Canada or for import into Canada; and/or 2. Purchase, directly or indirectly, any of the automotive parts listed in the chart below in Canada. If so, you might be affected by settlements reached in related class actions. SETTLEMENTS ACHIEVED The following settlements have been achieved: Defendants Relevant Part Relevant Period Amount Alps Electric Co., Ltd., Alps Electric (North Heater Control Panels 2000 to 2016 $425,000.00 America), Inc., and Alps Automotive Inc. Faurecia SA, Faurecia Emissions Control Automotive Exhaust Systems 2002 to 2019 $207,962.04 Technologies Canada, Ltd., Faurecia Emissions Control Technologies, USA, LLC, Faurecia Exhaust Systems, LLC (misnamed as Faurecia Exhaust Systems, Inc.), and Faurecia Systèmes d’Èchappement INOAC Corporation, INOAC USA, Inc., INOAC Plastic Interior Trim 2004 to 2020 USD$325,000 Interior Systems LLC, INOAC Interior Systems LP, and INOAC Canada Limited1 Kayaba Industry Co. Ltd. d/b/a KYB Corporation Shock Absorbers 1995 to 2019 $4,840,000 and KYB Americas Corporation Marelli Corporation (formerly known as Calsonic Air Conditioning Systems 2001 to 2019 $878,935.99 Kansei Corporation) and Marelli North America, Automatic Transmission Fluid 2002 to 2017 $64,867.52 Inc. (formerly known as Calsonic Kansei North Warmers and Oil Coolers America, Inc.) Heater Control Panels 2000 to 2016 $50,000.00
    [Show full text]
  • Happiness Is a Small, Warm Off-Roader
    Happiness is a small, warm off-roader . OMPETITION among makers of light- weight trail bikes is as fierce as in any C other class of machinery. This intensity results in continually improving products, much to the customer’s benefit. An example of the constant development of these sporty dual purpose machines is Bridgestone’s new 100 Trail, a mount that reflects the trend toward greater sophistication among small displacement trail motorcycles. The 100’s predecessor, the 90 Mountaineer (CW, Feb. ‘66), was a tough little performer, but the new bike includes a number of refinements. Most obvious, as the name of the machine reveals, is an increase in piston displacement, to an actual capacity of 99 cc. Equally important is the change from the pressed steel backbone type frame of the 90, to the full cradle tubular frame of the 100. This vital modification makes the 100 Trail a really strong mount for the treatment it may have to take in the backwoods. The frame, combined with good suspension character- istics, keeps the bike on tine in the roughest going, absorbing jolts that might throw lesser machines off course. Sophistication is evident in many other components. The engine is a disc valve unit, and consequently enjoys a wide spread of power. The four-speed gearbox operates on a rotary pattern, so that when the bike is in top gear, a depression of the lever moves the box into neutral, and a successive downward pedal movement returns it to first gear. The main benefit of the system lies in reduced gear changing in city traffic, but some riders apparently dislike the rotary pattern, claiming that it is confusing.
    [Show full text]
  • (DAT-3) Datsun 240Z-HSR 2015
    HSR Supplemental Regulations (DAT-3): (last revised 12/28/14) Datsun (Nissan) 240Z (1969-1973) HSR Group 3 Class: HP7 Historic Production Category (SCCA C/P) The following cars are covered under these regulations: 1969-1973 Datsun 240Z (2393cc, SOHC I-6) Note: chassis may be updated or backdated to achieve proper specifications ------------------------------------------------------------------------------------------------------------------------------------------------------------- Engines: .047” (1.2mm) maximum overbore allowed L24 (2393cc) Bore x stroke 3.2677” x 2.90” Head material……….aluminum Block material………cast iron Carburetion…………. (3) 44PHH Mikuni or (2) Hitachi HJG 46W or SU equivalent. ------------------------------------------------------------------------------------------------------------------------------------------------------------- Transmissions: Datsun/Nissan…………………….4 or 5 speeds, ratios free ------------------------------------------------------------------------------------------------------------------------------------------------------------- Chassis: 2 door, uni-body coupe, steel body, independent rear suspension Wheelbase: 90.7” Track dimension: front…54”, +/- 2” rear…54”, +/- 2” Wheels: 7” x 14” Brakes, pre-1973 (CP): 11” discs, iron calipers; front 9” drums; rear Suspension: MacPherson strut w/coil spring; front hydraulic strut w/coil spring; rear ------------------------------------------------------------------------------------------------------------------------------------------------------------- Official
    [Show full text]
  • Multi Technology System INC. Company Profile
    Multi Technology System INC. Company Profile Best technology, automation systems, Quality and safety. Solutions for Automation To provide customers excellent-quality Products and service Table of Contents 1 GREETINGS 2 BRIEF HISTORY 3 COMPANY BROCHURE 4 M’Tech System Demo Staion 5 CUSTOMER 6 MAJOR ITEM 7 MAJOR PROJECTS To manufacture 8 PURGE TESTING PROCEDURE best-quality products 9 INSPECTION that customers rely on 10 QUALITY Greetings The First step“ of control starts with the precise measurement of value. Since it’s establishment in 2002, MTECH has been engaged in manufacturing of the PLC & HMI System and Air Purge Panel. We are realizing defect-free production through supplying and accurate and effcient system to various area industrial work places and the latest equipment MTECH has developed it’s own technology and quality to meet international standards and will continue to find new way for better the service to our customers. ALL of MTECH employees are committed to serve their customers with integrity and diligence. We will try it’s utmost until it can solve problem in any place and anytime at the request of customers. Thank you. President Suck Chul KANG BRIEF HISTORY Going to get The Certificate INNOBIZ Obtained The Certificate of R&D Center M'TECH System Factoy Extension Rockwell RcSI (AB PLC) Certificate Samsung Total Certificate Headquarter has just acquired a new office for the extent and move KGS Certificate for Technical Capability & Production Organization SK Energy Certificate Venture Business Certificate Obtained The Certificate of ISO 9001:2000 Established M Tech System INC. COMPANY BROCHURE HEAD OFFICE FACTORY COMPANY BROCHURE The conference room is provided for your convenience and are equipped with everything they could to make our customers feel welcome.
    [Show full text]
  • Vehicle Industry Review and Outlook Alixpartners Proprietary
    Vehicle Industry Review and Outlook AlixPartners Proprietary Agenda State of the Industry (OEMs/suppliers) Troubled Suppliers Globalization/China Quality/Warranty Entry level segment Summary 2 AlixPartners Proprietary AlixPartners - Introduction 3 AlixPartners Proprietary AlixPartners Has Worked With Vehicle Manufacturers and Suppliers Globally AZ Automotive Corp. 4 AlixPartners Proprietary AlixPartners Offers Three Key Differentiators Experienced staff, with practical, real-world experience Small Senior Teams Small Senior Teams Significant senior leadership time High company ownership Components of compensation based on results AlignedAligned IncentivesIncentives Results are driven to the bottom line Success is definitive and measurable Experienced implementers ProvenProven ResultsResults Culture and approach built on speed and urgency Results focus—not reports 5 AlixPartners Proprietary The 2006 AlixPartners Automotive Benchmarking Survey Includes 104 Suppliers, 22 Auto and 18 Heavy Truck OEMs Ford, General BMW, DaimlerChrysler, Fiat, Chongqing Changan, Dongfeng, Fuji, Honda, Motors Peugeot, Porsche, Renault, Hyundai, Isuzu, KIA, Mazda, Mitsubishi, Volkswagen Nissan, Shanghai Automotive, Suzuki, Toyota Caterpillar, Deere, Navistar, CNH, Man AG, Scania, Volvo Ashok Leyland, Changchun Faw-Sihuan, Hino Oshkosh Truck, Paccar Motors, Inner Mongolia North Hauler, Komatsu, Mahindra & Mahindra, Mitsubishi Heavy, Tata, Yangzhou Yaxing AmericasAmericas EuropeEurope AsiaAsia American Axle, ArvinMeritor, Autoliv, Bosch Automotive,
    [Show full text]
  • List of Exhibitors (As of November 4, 2011)
    THE 42ND TOKYO MOTOR SHOW 2011 LIST OF EXHIBITORS (AS OF NOVEMBER 4, 2011) Passenger Cars ALPINA (Germany) MERCEDES-BENZ (Germany) AMG (Germany) MINI (U.K.) AUDI (Germany) NISSAN BMW (Germany) MITSUBISHI CITROËN (France) PEUGEOT (France) DAIHATSU PORSCHE (Germany) HONDA RANGE ROVER (U.K.) JAGUAR (U.K.) RENAULT (France) KTM (Austria) *including motorcycles SMART (Germany) LAND ROVER (U.K.) SUBARU LEXUS SUZUKI *including motorcycles LOTUS (U.K.) TOYOTA MAYBACH (Germany) VOLKSWAGEN (Germany) MAZDA Commercial Vehicles HINO MITSUBISHI-FUSO HYUNDAI (Korea) UD TRUCKS ISUZU VOLVO TRUCKS (Sweden) Motorcycles ADIVA (Italy) KYMCO(Taiwan) HONDA YAMAHA KAWASAKI Carrozzeria CAMPAGNA MOTORS (Canada) RESC D ART SMILE PARK KOWA TMSUK SUNNYSIDE GARAGE NIHON AUTOMOBILE COLLEGE TAKAYAMA CARS RADICAL SPORTSCARS (U.K.) TEAM PROMINENCE Vehicle Bodies (Indoors) KANTO AUTO WORKS TOYOTA AUTO BODY NISSAN SHATAI Vehicle Bodies (Outdoors) <JABIA Joint Exhibition> Fuji Heavy Industries Ltd. ShinMaywa Industries, Ltd. Kyokuto Kaihatsu Kogyo Co., Ltd. Sugawa Shatai Co., Ltd. Nippon Fruehauf Co., Ltd. Tadano Ltd. Nippon Trex Co., Ltd. Japan Auto-Body Industries Association Inc. Pabco Co., Ltd. Parts, Machinery and Tools Advics Co., Ltd. Kyoto Tool Co., Ltd. Ahresty Corp. Kyowa Kogyo Co., Ltd. Aisin AI Co., Ltd. MAHLE Engine Components Japan Corp. Aisin AW Co., Ltd. MAHLE Filter Systems Japan Corp. Aisin Chemical Co., Ltd. MAHLE GmbH (Germany) Aisin Seiki Co., Ltd. Maeda Metal Industries, Ltd. Aisin Takaoka Co., Ltd Matsui Universal Joint Corp. Akebono Brake Industry Co., Ltd. Midori Hokuyo Co., Ltd. Amon Industry Co., Ltd. Mikuni Corp. Anden Co., Ltd. Militec Corp. (U.S.A.) Asahi Denso Co., Ltd. Mito Tool Mfg. Co., Inc.
    [Show full text]
  • Notice of Hearing in Canadian Auto Parts Price-Fixing Class Actions
    NOTICE OF HEARING IN CANADIAN AUTO PARTS PRICE-FIXING CLASS ACTIONS If you bought or leased, directly or indirectly, a new or used Automotive Vehicle or certain automotive parts, since January 1995 you should read this notice carefully. It may affect your legal rights. A. WHAT IS A CLASS ACTION? A class action is a lawsuit filed by one person on behalf of a large group of people. B. WHAT ARE THESE CLASS ACTIONS ABOUT? Class actions have been started in Canada claiming that many companies participated in conspiracies to fix the prices of automotive parts sold in Canada and/or sold to manufacturers for installation in Automotive Vehicles1 sold in Canada. This notice is about proposed settlements relating to 18 automotive parts (see Part D) and a proposed distribution relating to 17 automotive parts (see Part J) (the “Relevant Parts”). A description of the Relevant Parts is included in Schedule A hereto. The class actions were started in British Columbia, Ontario and/or Quebec, but include Canadian residents in all provinces and territories. The class actions claim that the companies that sell the Relevant Parts were involved in conspiracies to illegally increase the prices of these products. These class actions ask the applicable Courts to require these companies to return any extra money they may have received due to the alleged conspiracies. C. WHO IS AFFECTED BY THE CLASS ACTIONS? These class actions were certified as class proceedings as against the Settling Defendants for the purposes of implementing the settlement agreements. You are affected by the class actions mentioned above and/or are a “member” of the settlement class of those actions if you are a person in Canada who, during the relevant class period (see Schedule A): purchased or leased, directly or indirectly, a new or used Automotive Vehicle in Canada; purchased a new or used Automotive Vehicle for import into Canada; or purchased, directly or indirectly, a Relevant Part in Canada.
    [Show full text]
  • Mikuni VM Roundslides X Mikuni VM Roundslides H a U S T C H E M I C a L S I N T a K E C O N T R O L S U S P E N S I O N E N G I N E
    Exhaust Chemicals Intake Control Suspension Engine Electrical Vintage Tools Watercraft 48 VM Roundslides VM Roundslides f-road vehicles where pollution laws are not in wide range of tuning components are available to A Mikuni Mikuni if you have modifications, it is necessary to follow the guidelines to insure receiving the , ype of Carburetor (Clamp-On, Spigot Mount, Flange Mount, Flat-Slide, etc.) Climate Conditions (Indicate if high altitude) T Carburetor Size (mm) WEB: WWW.SUDCO.COM WEB: WWW.SUDCO.COM E-MAIL: [email protected] 7. 6. of Fuel Used Type 2. 5. of Motorcycle Use (Street, drag, Road Race, Motocross, Enduro, etc.) Type 1. 4. Modifications on motorcycle (Explain) 3. and Cubic Centimeters) Year Application (Model, Changes and jetting modifications are for use only on racing machines or similar of proper jetting at the closest range. Most popular settings are already available. However Sudco can “Special Jet” any Mikuni Carburetor for your particular application. Below is the information you will need to provide our Carburetor so they can provide you with the correct carburetor and jetting. Technicians Specialist allow precise fuel mixture These are the most popular high performance single carburetors in the sport of motorcycling. Mikuni’s VM Series round slide single carburetors These are the most popular high performance single carburetors in the sport of motorcycling. Mikuni’s application for motocross, enduro, and trail ATV have proven themselves as the performance standard for use in any cylinder motorcycle and riding, to flat track racing and road racing on both 2-stroke and 4-stroke engines. Performance features for the VM Series Carburetors include a large selection of bore sizes for increased fuel mixture flow to match engine modifications.
    [Show full text]
  • Fuel Injection Systems Second Consolidated Amended Class
    2:13-cv-02203-MOB Doc # 271 Filed 03/29/17 Pg 1 of 129 Pg ID 8917 REDACTED UNITED STATES DISTRICT COURT EASTERN DISTRICT OF MICHIGAN SOUTHERN DIVISION ____________________________________________ ) ) In Re: AUTOMOTIVE PARTS ) 12-md-02311 ANTITRUST LITIGATION ) Honorable Marianne O. Battani ____________________________________________ ) ) 2:13-cv-02203-MOB-MKM In re: FUEL INJECTION SYSTEMS ) ____________________________________________ ) SECOND CONSOLIDATED AMENDED ) CLASS ACTION COMPLAINT THIS RELATES TO: ) ) JURY TRIAL DEMANDED ALL END-PAYOR ACTIONS ) ) [REDACTED] ____________________________________________ ) 2:13-cv-02203-MOB Doc # 271 Filed 03/29/17 Pg 2 of 129 Pg ID 8918 REDACTED Plaintiffs Ifeoma Adams, Halley Ascher, Gregory Asken, Melissa Barron, Kimberly Bennett, David Bernstein, Ron Blau, Tenisha Burgos, Kent Busek, Jennifer Chase, Rita Cornish, Nathan Croom, Lori Curtis, Jessica Decastro, Theresia Dillard, Alena Farrell, Jane Fitzgerald, Carroll Gibbs, Dori Gilels, Jason Grala, Ian Groves, Curtis Gunnerson, Tom Halverson, Curtis Harr, Andrew Hedlund, Gary Arthur Herr, John Hollingsworth, Carol Ann Kashishian, Elizabeth Kaufman, Robert Klingler, Kelly Klosterman, James Marean, Michelle McGinn, Rebecca Lynn Morrow, Edward Muscara, Stacey Nickell, Sophie O’Keefe-Zelman, Roger Olson, William Picotte, Whitney Porter, Cindy Prince, Janne Rice, Robert Rice, Jr., Frances Gammell-Roach, Darrel Senior, Meetesh Shah, Darcy Sherman, Erica Shoaf, Arthur Stukey, Kathleen Tawney, Jane Taylor, Keith Uehara, Michael Wick, and Phillip Young (“Plaintiffs”), on behalf of themselves and all others similarly situated (the “Classes” as defined below), upon personal knowledge as to the facts pertaining to themselves and upon information and belief as to all other matters, and based on the investigation of counsel, bring this class action for damages, injunctive relief, and other relief pursuant to federal antitrust laws and state antitrust, unfair competition, consumer protection, and unjust enrichment laws, and allege as follows: NATURE OF ACTION 1.
    [Show full text]
  • 2021 AMA Amateur Competition Rulebook
    2021 RULEBOOK 2021 AMA Racing Rules Governing Pro/Am, Standard, ATV and Youth Competition An exclusive service to members of the American Motorcyclist Association The American Motorcyclist Association takes pride in its long record of achievement as the world’s largest sanctioning body for the sport of motorcycle competition. Since 1924 the objectives of the Association have been the same: to foster strong and fair competition, to provide reasonable guidelines for the various types of competition, and to provide an impartial competition program. The rules of competition are intended only as a guide for the conduct of the sport pursuant to uniform rules. Rules related to safety are made to make everyone concerned with safety. However, the AMA neither warrants safety if the rules are followed nor compliance with the enforcement of the rules. Moreover, each participant in competition has the responsibility to assess the safety aspects of facilities and conditions and must assume the risk of competition. Recognized and non-recognized districts, and organizations within a district, must submit any temporary or locally appropriate supplemental regulations for approval by the AMA Racing Department. Supplemental regulations may not be in conflict with national rules. In the event of a protest or appeal, the judgment will be based on information contained in the AMA national rules. Contact the AMA at (800) 262-5646 for the address of your district office. The American Motorcyclist Association (AMA) prohibits discrimination in all of its programs and activities (including all AMA-sanctioned events) on the basis of race, color, national origin, creed, religion, sex, age, disability, veteran status, marital status, familial status, parental status, sexual orientation, or any other category protected by applicable state or federal law.
    [Show full text]