TOKYO SOKUTEIKIZAI CO., LTD.

Rotary Switch RS300 P. 5 RS400 P. 5 RS500 P. 5 MR8A P. 7

Code Switch DP P.11 MR8C P.15

Rotary Encoder RE29 P.19 RE25 P.21 RE24 P.23 RE23 P.25

Manual Pulse Generator RE45T P.29 RE45B P.31 RE46 P.33 RE47 P.35

Handy Manual Pulse Generator HT P.39 HC1 P.43 HM P.49 HR P.53 HS P.57

Trackball TB36 P.61

TOKYO SOKUTEIKIZAI CO., LTD.

Rotary Switch Catalogue

RS300P.05 high blocking voltage model available

RS400P.05 compact, shorting/non shorting selectable

RS500P.05 various step angles: 15/20/30/45/60 degrees

MR8AP.07 8mm square tiny rotary switch, waterproof model available

Rotary Switches RS300/400/500 Series Outline Our RS series embody the manufacturing history of our company. All series are sturdy and solid with high dependability designed for control units of plants, installations,audio equipments, etc. Features

● Free to change the number of switch positions by replacing self-tapping screws ● Various combinations of double shafted model available ● RoHS compliant

Specifications

RS300 RS400 RS500 Step Angles 15/20/30/60 30/60 15/20/30/45/60 15/20: Shorting Shorting and Non-shorting 15/20: Shorting Switching Mechanism 30/60: Non-shorting selectable 30/45/60: Non-shorting Water Proofing ------Adapter panel and rubber o-rings provided at requests Gold Contacts Available Available High-Voltage Withstanding ------(Up to 6,000V) Operating Temperature -20℃ +70℃ Storage Temperature -40℃ +C70℃ Rotational Torque 0.12N・m ~ 0.35N・m 0.10N・m ~ 0.25N・m Terminal Strength 10N Nut Tightening Torque 2N・m 10Hz ~ 55Hz ~ 10Hz/min (vibrated for 1.5mm to each XYZ direction) Vibration Resistance No defect found under conditions above Heat Resistance of Solder 350±10℃ , 3 seconds ±1 (1kHz±200Hz of voltage 20mV. 50mA or less) Contact Resistance 5mΩ max. 15mΩ max. 10mΩ max. After 1 min. of 500VDC terminal-terminal 1,000MΩ ≦ Insulation Resistance terminal-ground 50,000MΩ ≦ Withstanding Voltage 1,000VAC 1min. 500VAC 1min. AC 30V 3.0A/200V 0.5A 30V 1.0A/200V 0.2A 30V 1.5A/200V 0.2A Rated Value DC 20V 3.0A/200V 0.2A 20V 1.0A/200V 0.1A 20V 1.5A/200V 0.1A Durability at least 50,000 strokes

Part Number Designation RS 500 N 2 2 12 A P 15 16 R G

Switch Model Material Used Length of the RS300,RS400,RS500 P: Phenol shaft (mm) 16, 20 Mounting E: Epoxy N: Nut-locked at center Step Angle P: Waterproof V: Fastened with 2 screws 15, 20, 30, 60 (RS300) 30, 60 (RS400) Decks 15, 20, 30, 45, 60 (RS500) Total Poles Shape of the shaft Positions R: Round Whirl Stop Contact Type Gold contact L: Endless A: Non-shorting * Optional None: With whirl stop B: Shorting 㻮㼡㼟㼔㼕㼚㼓 㻼㼍㼚㼑㼘㻌㻹㼛㼡㼚㼠㼕㼚㼓㻌㻴㼛㼘㼑 㻰㼕㼙㼑㼚㼟㼕㼛㼚㼟㻌㻔㼙㼙㻕 䠌 䠏䠌 䠩䠕䠄䠬䠙䠌䠊䠓䠑䠅 䠮䠯䠉 䠧 䠨 䠩 䠪 䠦 䠫 䠬

䠥 㻌㻜 㻙㻜㻚 㻝 䠭 䃥㻟㻚㻞 䠤

䠣 㼼㻝

䠏 䠢 㻝㻟㻚㻡 䃥㻢

㻠㻟 䃥㻥㻚㻞 䠰

㻡㻞

䠟 䠳 䠞

䠴 㻾㻿㻟㻜㻜㻛㻠㻜㻜㻛㻡㻜㻜㻺㻌㼍㼏㼏㼑㼟㼟㼛㼞㼕㼑㼟 䚷㻹㻥㻌㻺㼡㼠㻌㻔㼠㻩㻞㼙㼙㻕 䚷㻹㻥㻌㼀㼛㼛㼠㼔㼑㼐㻌㼘㼛㼏㼗㻌㼣㼍㼟㼔㼑㼞㻌㻔㼠㻩㻝㼙㼙㻕 㻞 䚷㼃㼍㼟㼔㼑㼞㻌㻔㼠㻩㻜㻚㻡㼙㼙㻕 㻝㻟㻚㻡 㻤 㻞㻝 㻝㻝 RS300_Dimensions (mm) 㻟㻥㼼㻝 㻸㼼㻝 㼼䠎 㻠㻟㼼㻝 㻮㼡㼟㼔㼕㼚㼓 㼀㼣㼛㻌㼟㼏㼞㼑㼣㼟㻌㼒㼕㼤 㻼㼍㼚㼑㼘㻌㻹㼛㼡㼚㼠㼕㼚㼓㻌㻴㼛㼘㼑 㻼㼍㼚㼑㼘㻌㻹㼛㼡㼚㼠㼕㼚㼓㻌㻴㼛㼘㼑 㻰㼕㼙㼑㼚㼟㼕㼛㼚㼟㻌㻔㼙㼙㻕 㻰㼕㼙㼑㼚㼟㼕㼛㼚㼟㻌㻔㼙㼙㻕 䠌 㻴㼛㼘㼑㻌㼒㼛㼞㻌㼠㼣㼛㻌㼜㼛㼕㼚㼠㼟㻌㼒㼕㼤 䠏䠌 䠩䠕䠄䠬䠙䠌䠊䠓䠑䠅 䠏䠉䠩䠏㽢䠓䚷─䛽䛨 䠮䠯䠉 㻴㼛㼘㼑㻌㼒㼛㼞㻌㼠㼔㼞㼑㼑 䠧 䠨 䠩 䠪 䠦 䠫 㼜㼛㼕㼚㼠㼟㻌㼒㼕㼤 䠬

䠥 㻌㻜 㻙㻜㻚 㻝 䠭 䃥㻟㻚㻞 䠌䠌 䠤 䠮䠍䠒䚷䠍䠎䠌㼻ᐄ

䠣 㼼㻝 䠮䠯䠉䠏 䠩

䠏 䠨 䠪 䠢 㻝㻟㻚㻡 䃥㻢 䠧

㻠㻟 䃥㻥㻚㻞 䠫

䠰 䠦

䠡 䠬

㻡㻞 㻌㻜 㻙㻜㻚 㻝

䠱 䠥

䠠 䠭

䠲 䠤

䠟 䃥䠒䠊䠑

䠳 䠞 䠴 䠣 㻝㻞㻜㼻 㻾㻿㻟㻜㻜㻛㻠㻜㻜㻛㻡㻜㻜㻺㻌㼍㼏㼏㼑㼟㼟㼛㼞㼕㼑㼟 㼼㻌 㻝

㼼㻜㻚㻡

䠢 䃥㻢

䠱 㻡㻞

㻠㻟

䚷㻹㻥㻌㻺㼡㼠㻌㻔㼠㻩㻞㼙㼙㻕 䠠 㻠㻟

䠟 䠳 䠞

䚷㻹㻥㻌㼀㼛㼛㼠㼔㼑㼐㻌㼘㼛㼏㼗㻌㼣㼍㼟㼔㼑㼞㻌㻔㼠㻩㻝㼙㼙㻕 䠴 㻞 䚷㼃㼍㼟㼔㼑㼞㻌㻔㼠㻩㻜㻚㻡㼙㼙㻕 䠮䠍䠒 㻝㻟㻚㻡 㻤 㻞㻝 㻝㻝 㻟㻥㼼㻝 㻸㼼㻝 㼼䠎 㻠㻟㼼㻝 㻟㻥 㼼㻌㻝 㻞㻝 㻝㻝 㻾㻿㻟㻜㻜㼂㻌㼍㼏㼏㼑㼟㼟㼛㼞㼥 㻠㻟 㼼㻌㻝 㻸㼼㻝 㼼䠎 㼀㼔㼞㼑㼑㻌㻹㻟㼤㻣㻌㼟㼏㼞㼑㼣㼟 㻔㼒㼛㼞㻌㼠㼣㼛㻌㼜㼛㼕㼚㼠㼟㻌㼒㼕㼤㻘㻌㼣㼕㼠㼔㻌㼠㼣㼛㻌㼟㼏㼞㼑㼣㼟㻕 㼀㼣㼛㻌㼟㼏㼞㼑㼣㼟㻌㼒㼕㼤 㻼㼍㼚㼑㼘㻌㻹㼛㼡㼚㼠㼕㼚㼓㻌㻴㼛㼘㼑 㻰㼕㼙㼑㼚㼟㼕㼛㼚㼟㻌㻔㼙㼙㻕 㻴㼛㼘㼑㻌㼒㼛㼞㻌㼠㼣㼛㻌㼜㼛㼕㼚㼠㼟㻌㼒㼕㼤 䠏䠉䠩䠏㽢䠓䚷─䛽䛨 㻴㼛㼘㼑㻌㼒㼛㼞㻌㼠㼔㼞㼑㼑 㻸㼑㼚㼓㼠㼔 㼜㼛㼕㼚㼠㼟㻌㼒㼕㼤 䠄䡉䡉䠅 䠮䠍䠒䚷䠍䠎䠌㼻ᐄ 䠌䠌 㻿㼠㼍㼚㼐㼍㼞㼐㻌㼟㼔㼍㼒㼠㻌㼘㼑㼚㼓㼠㼔 䠮䠯䠉䠏 䠧 䠨 䠩 䠪 䠦 䠫 䠬 䠥 㻌㻜 㻙㻜㻚 㻝 䠨 䠭 䠍䠒 䠍䠔 䠎䠌 䠤 䃥䠒䠊䠑

㻝㻞㻜㼻 㻮㼡㼟㼔㼕㼚㼓 㼼㻌 㻝

㼼㻜㻚㻡

䠢 䃥㻢

䠱 㻡㻞

㻠㻟

䠠 㻠㻟

䠳 䠞 䠴 㻺㼡㼙㼎㼑㼞㻌㼛㼒㻌㻸㼍㼥㼑㼞㼟 䠍䠎䠏䠐 㻼㼍㼚㼑㼘㻌㻹㼛㼡㼚㼠㼕㼚㼓㻌㻴㼛㼘㼑 㻰㼕㼙㼑㼚㼟㼕㼛㼚㼟㻌㻔㼙㼙㻕 䠮䠍䠒 䠄䡉䡉䠅 䠎䠓 䠏䠔 䠐䠕 䠒䠌 䠩䠕䠄䠬䠙䠌䠊䠓䠑䠅 䠴 䠞 䠟 䠠 䠱 㻌 䃥㻟㻚㻞 䠡

䠰 㻌㻜 㻙㻜㻚 㻝

䠯 㻟㻥 㼼㻌㻝 㻞㻝 㻝㻝 㻾㻿㻟㻜㻜㼂㻌㼍㼏㼏㼑㼟㼟㼛㼞㼥 㼼㻝

䠏 㻝㻞 䠮 㻟㻞

䠤 䃥㻥㻚㻞

䃥㻢

䠭 㻟㻣 㼀㼔㼞㼑㼑㻌㻹㻟㼤㻣㻌㼟㼏㼞㼑㼣㼟 䠥

㻠㻟 㼼㻌㻝 㻸㼼㻝 㼼䠎 䠬 䠫

䠪 㻖䃥㻟㻚㻞㼔㼛㼘㼑㻌㼚㼛㼠㻌㼚㼑㼑㼐㼑㼐㻌㼒㼛㼞㻌㼣㼍㼠㼑㼞㼜㼞㼛㼛㼒 䠨

㻔㼒㼛㼞㻌㼠㼣㼛㻌㼜㼛㼕㼚㼠㼟㻌㼒㼕㼤㻘㻌㼣㼕㼠㼔㻌㼠㼣㼛㻌㼟㼏㼞㼑㼣㼟㻕 䠩 㻾㻿㻟㻜㻜㻛㻠㻜㻜㻛㻡㻜㻜㻺㻌㼍㼏㼏㼑㼟㼟㼛㼞㼕㼑㼟 㻞 䚷㻹㻥㻌㻺㼡㼠㻌㻔㼠㻩㻞㼙㼙㻕 㻝㻞 䚷㻹㻥㻌㼀㼛㼛㼠㼔㼑㼐㻌㼘㼛㼏㼗㻌㼣㼍㼟㼔㼑㼞㻌㻔㼠㻩㻝㼙㼙㻕 㻸㼑㼚㼓㼠㼔 㻤 㻝㻢 㻝㻜 䠄䡉䡉䠅 䠎䠑㼼䠍 䚷㼃㼍㼟㼔㼑㼞㻌㻔㼠㻩㻜㻚㻡㼙㼙㻕 㻿㼠㼍㼚㼐㼍㼞㼐㻌㼟㼔㼍㼒㼠㻌㼘㼑㼚㼓㼠㼔 RS400_Dimensions (mm) 㻸㼼㻝 㼼㻞 䠨 䠍䠒 䠍䠔 䠎䠌 㻮㼡㼟㼔㼕㼚㼓 㻺㼡㼙㼎㼑㼞㻌㼛㼒㻌㻸㼍㼥㼑㼞㼟 䠍䠎䠏䠐 㻼㼍㼚㼑㼘㻌㻹㼛㼡㼚㼠㼕㼚㼓㻌㻴㼛㼘㼑 㼀㼣㼛㻌㼟㼏㼞㼑㼣㼟㻌㼒㼕㼤 㻰㼕㼙㼑㼚㼟㼕㼛㼚㼟㻌㻔㼙㼙㻕 䠄䡉䡉䠅 䠎䠓 䠏䠔 䠐䠕 䠒䠌 㻼㼍㼚㼑㼘㻌㻹㼛㼡㼚㼠㼕㼚㼓㻌㻴㼛㼘㼑 䠩䠕䠄䠬䠙䠌䠊䠓䠑䠅 䠎䠉䠩䠎䠊䠏㽢䠒─䛽䛨 㻰㼕㼙㼑㼚㼟㼕㼛㼚㼟㻌㻔㼙㼙㻕 䠴 䠞 䠟 䠠 䠱 㻌 䃥㻟㻚㻞 䠡 㻙㻜㻚 㻝 䠰 㻌㻜

䠯 㼼㻝

䠏 㻝㻞 䠴 䠞 䠮

㻟㻞 䠟

䠤 䃥㻥㻚㻞 䃥㻢 䠭 䠠

㻟㻣 䠱 㻴㼛㼘㼑㻌㼒㼛㼞㻌㻹㻞㻚㻟㻌㼟㼏㼞㼑㼣 䠥 㻌 䠬 䠡

䠰 㻌㻜 㻙㻜㻚 㻝

䠫 䠢

䠪 㻖䃥㻟㻚㻞㼔㼛㼘㼑㻌㼚㼛㼠㻌㼚㼑㼑㼐㼑㼐㻌㼒㼛㼞㻌㼣㼍㼠㼑㼞㼜㼞㼛㼛㼒 䠨 䠩 䠯

㼼㻝 䠣

㼼㻜㻚㻡

䠮 䠤

䃥㻢

䠭 㻟㻣

㻾㻿㻟㻜㻜㻛㻠㻜㻜㻛㻡㻜㻜㻺㻌㼍㼏㼏㼑㼟㼟㼛㼞㼕㼑㼟 䠥

䠬 㻟㻞 㻟㻞

䠪 䠨

㻞 䚷㻹㻥㻌㻺㼡㼠㻌㻔㼠㻩㻞㼙㼙㻕 䠩 䃥䠒䠊䠑 㻝㻞 䚷㻹㻥㻌㼀㼛㼛㼠㼔㼑㼐㻌㼘㼛㼏㼗㻌㼣㼍㼟㼔㼑㼞㻌㻔㼠㻩㻝㼙㼙㻕 㻤 㻝㻢 㻝㻜 䚷㼃㼍㼟㼔㼑㼞㻌㻔㼠㻩㻜㻚㻡㼙㼙㻕 䠎䠑㼼䠍 㻔㻞㻡㻕 㻸㼼㻝 㼼㻞 㻝㻢 㻝㻜 㻾㻿㻠㻜㻜㼂㻌㼍㼏㼏㼑㼟㼟㼛㼞㼥 㼀㼣㼛㻌㻹㻞㻚㻟㼤㻢㻌㼟㼏㼞㼑㼣 㻸㼼㻝 㼼㻞 㼀㼣㼛㻌㼟㼏㼞㼑㼣㼟㻌㼒㼕㼤 㻼㼍㼚㼑㼘㻌㻹㼛㼡㼚㼠㼕㼚㼓㻌㻴㼛㼘㼑 㻸㼑㼚㼓㼠㼔 䠎䠉䠩䠎䠊䠏㽢䠒─䛽䛨 㻰㼕㼙㼑㼚㼟㼕㼛㼚㼟㻌㻔㼙㼙㻕 䠄䡉䡉䠅 㻿㼠㼍㼚㼐㼍㼞㼐㻌㼟㼔㼍㼒㼠㻌㼘㼑㼚㼓㼠㼔 䠴 䠞 䠟 䠠 䠱 㻴㼛㼘㼑㻌㼒㼛㼞㻌㻹㻞㻚㻟㻌㼟㼏㼞㼑㼣 㻌 䠨 䠡 䠍䠒 䠍䠔 䠎䠌

䠰 㻌㻜 㻙㻜㻚 㻝

㼼㻝 䠣

㼼㻜㻚㻡 㻮㼡㼟㼔㼕㼚㼓 䠮 䠤

䃥㻢

䠭 㻟㻣

䠬 㻟㻞 㻟㻞

䠨 䠩 䃥䠒䠊䠑 㻺㼡㼙㼎㼑㼞㻌㼛㼒㻌㻸㼍㼥㼑㼞㼟 䠍䠎䠏䠐 㻼㼍㼚㼑㼘㻌㻹㼛㼡㼚㼠㼕㼚㼓㻌㻴㼛㼘㼑 䠄䡉䡉䠅 䠎䠎䠄䠎䠒䠅 䠏䠎䠄䠐䠍䠅 䠐䠎䠄䠑䠒䠅 䠑䠎䠄䠓䠍䠅 㻰㼕㼙㼑㼚㼟㼕㼛㼚㼟㻌㻔㼙㼙㻕 㻔㻌㻌㻕㻌㻦㻌㼒㼛㼞㻌㼍㼘㼘㻌㼏㼛㼚㼠㼍㼏㼠㼟㻌㼠㼥㼜㼑 䠩䠕䠄䠬䠙䠌䠊䠓䠑䠅 㻔㻞㻡㻕 䠴 䠞 㻝㻢 㻝㻜 㻾㻿㻠㻜㻜㼂㻌㼍㼏㼏㼑㼟㼟㼛㼞㼥 䠟 䠠 䠱

㻌㻜 㻙㻜㻚 㻝 䃥㻟㻚㻞 䠡 䠰

㼀㼣㼛㻌㻹㻞㻚㻟㼤㻢㻌㼟㼏㼞㼑㼣 㻝

䠯 㼼

䠏 㻝㻞 䠮

㻸㼼㻝 㼼㻞 㻟㻞 䃥㻢

䠤 䃥㻥㻚㻞 䠭

䠥 㻟㻤

䠪 㻖䃥㻟㻚㻞㼔㼛㼘㼑㻌㼚㼛㼠㻌㼚㼑㼑㼐㼑㼐㻌㼒㼛㼞㻌㼣㼍㼠㼑㼞㼜㼞㼛㼛㼒 䠨 䠩 㻾㻿㻟㻜㻜㻛㻠㻜㻜㻛㻡㻜㻜㻺㻌㼍㼏㼏㼑㼟㼟㼛㼞㼕㼑㼟 䚷㻹㻥㻌㻺㼡㼠㻌㻔㼠㻩㻞㼙㼙㻕 㻸㼑㼚㼓㼠㼔 㻝㻞 㻞 䚷㻹㻥㻌㼀㼛㼛㼠㼔㼑㼐㻌㼘㼛㼏㼗㻌㼣㼍㼟㼔㼑㼞㻌㻔㼠㻩㻝㼙㼙㻕 䠄䡉䡉䠅 㻞㻢㼼㻝 㻤 㻝㻢 㻝㻜 䚷㼃㼍㼟㼔㼑㼞㻌㻔㼠㻩㻜㻚㻡㼙㼙㻕 㻿㼠㼍㼚㼐㼍㼞㼐㻌㼟㼔㼍㼒㼠㻌㼘㼑㼚㼓㼠㼔 RS500_Dimensions (mm) 㻟㻠㼼㻝 㻸 㼼㻝 㼼㻞 䠨 䠍䠒 䠍䠔 䠎䠌 㻮㼡㼟㼔㼕㼚㼓 㻺㼡㼙㼎㼑㼞㻌㼛㼒㻌㻸㼍㼥㼑㼞㼟 䠍䠎䠏䠐 㻼㼍㼚㼑㼘㻌㻹㼛㼡㼚㼠㼕㼚㼓㻌㻴㼛㼘㼑 㼀㼣㼛㻌㼟㼏㼞㼑㼣㼟㻌㼒㼕㼤 䠄䡉䡉䠅 㻰㼕㼙㼑㼚㼟㼕㼛㼚㼟㻌㻔㼙㼙㻕 㻼㼍㼚㼑㼘㻌㻹㼛㼡㼚㼠㼕㼚㼓㻌㻴㼛㼘㼑 䠎䠎䠄䠎䠒䠅 䠏䠎䠄䠐䠍䠅 䠐䠎䠄䠑䠒䠅 䠑䠎䠄䠓䠍䠅 䠎䠉䠩䠎䠊䠏─䛽䛨 㻰㼕㼙㼑㼚㼟㼕㼛㼚㼟㻌㻔㼙㼙㻕 㻔㻌㻌㻕㻌㻦㻌㼒㼛㼞㻌㼍㼘㼘㻌㼏㼛㼚㼠㼍㼏㼠㼟㻌㼠㼥㼜㼑 䠩䠕䠄䠬䠙䠌䠊䠓䠑䠅 䠴 䠞 䠟 䠠 䠱

㻌㻜 㻙㻜㻚 㻝 䃥㻟㻚㻞 䠡 䠰 䠴 䠞 㻝 䠟 䠯

㼼 䠠 䠏 䠱 䠩䠎䠊䠏

㻝㻞 㻌㻜 㻙㻜㻚 㻝 䠮 㻟㻞 䠡 䃥㻢

䠤 䃥㻥㻚㻞 䠰 䠭

䠥 㻟㻤

㼼㻝

㼼㻜㻚㻡

䠪 㻖䃥㻟㻚㻞㼔㼛㼘㼑㻌㼚㼛㼠㻌㼚㼑㼑㼐㼑㼐㻌㼒㼛㼞㻌㼣㼍㼠㼑㼞㼜㼞㼛㼛㼒

䠨 䠩 䃥㻢

䠥 㻟㻤 䠬 㻟㻞

㻟㻞

㻾㻿㻟㻜㻜㻛㻠㻜㻜㻛㻡㻜㻜㻺㻌㼍㼏㼏㼑㼟㼟㼛㼞㼕㼑㼟 䠫

䠪 䠨 䠩 䃥䠒䠊䠑 䚷㻹㻥㻌㻺㼡㼠㻌㻔㼠㻩㻞㼙㼙㻕 㻝㻞 㻞 䚷㻹㻥㻌㼀㼛㼛㼠㼔㼑㼐㻌㼘㼛㼏㼗㻌㼣㼍㼟㼔㼑㼞㻌㻔㼠㻩㻝㼙㼙㻕 䚷㼃㼍㼟㼔㼑㼞㻌㻔㼠㻩㻜㻚㻡㼙㼙㻕 㻞㻢㼼㻝 㻤 㻝㻢 㻝㻜 㻞㻢㼼㻝 㻾㻿㻡㻜㻜㼂㻌㼍㼏㼏㼑㼟㼟㼛㼞㼥 㻟㻠㼼㻝 㻸 㼼㻝 㼼㻞 㻟㻠㼼㻝 㻝㻢 㻝㻜 㼀㼣㼛㻌㻹㻞㻚㻟㼤㻢㻌㼟㼏㼞㼑㼣 㻸㼼㻝 㼼㻞 㼀㼣㼛㻌㼟㼏㼞㼑㼣㼟㻌㼒㼕㼤 㻼㼍㼚㼑㼘㻌㻹㼛㼡㼚㼠㼕㼚㼓㻌㻴㼛㼘㼑 䠎䠉䠩䠎䠊䠏─䛽䛨 㻰㼕㼙㼑㼚㼟㼕㼛㼚㼟㻌㻔㼙㼙㻕 㻸㼑㼚㼓㼠㼔 䠄䡉䡉䠅

䠴 䠞 㻿㼠㼍㼚㼐㼍㼞㼐㻌㼟㼔㼍㼒㼠㻌㼘㼑㼚㼓㼠㼔 䠟 䠠 䠱 䠩䠎䠊䠏 㻌㻜 㻙㻜㻚 㻝 䠡 䠰

䠢 䠨

䠯 䠍䠒 䠍䠔 䠎䠌 䠣

㼼㻝 䠮 㼼㻜㻚㻡

䃥㻢

䠥 㻟㻤 䠬 㻟㻞

㻟㻞

䠪 䠨

䠩 䃥䠒䠊䠑 㻺㼡㼙㼎㼑㼞㻌㼛㼒㻌㻸㼍㼥㼑㼞㼟 䠍䠎䠏䠐 䠄䡉䡉䠅 䠎䠒 䠏䠒 䠐䠒 䠑䠒 㻞㻢㼼㻝 㻾㻿㻡㻜㻜㼂㻌㼍㼏㼏㼑㼟㼟㼛㼞㼥 㻟㻠㼼㻝 㻝㻢 㻝㻜 㼀㼣㼛㻌㻹㻞㻚㻟㼤㻢㻌㼟㼏㼞㼑㼣 㻸㼼㻝 㼼㻞

㻸㼑㼚㼓㼠㼔 䠄䡉䡉䠅 㻿㼠㼍㼚㼐㼍㼞㼐㻌㼟㼔㼍㼒㼠㻌㼘㼑㼚㼓㼠㼔 䠨 䠍䠒 䠍䠔 䠎䠌

㻺㼡㼙㼎㼑㼞㻌㼛㼒㻌㻸㼍㼥㼑㼞㼟 䠍䠎䠏䠐 䠄䡉䡉䠅 䠎䠒 䠏䠒 䠐䠒 䠑䠒 Ultra Compact Rotary Switch MR8A Series

Outline MR8A is our tiniest rotary switch designed for compact devices, used for many different equipments which has very limited space inside.

Features

● 8mm square compact (8.0x8.0 mm) ● Gold plated contacts ● Monolithic sealed structure of the terminals to prevent entry of a soldering flux ● RoHS compliant ● Waterproofed model available

Specifications

-20℃~ +70℃ 500MΩmin. (250VDC): Between Operating temperature -4F ~ 158F Keep the body Insulation terminals -40℃~ +70℃ unfrozen Resistance 1000MΩmin. (500VDC): Between Storage temperature -40F ~ 158F Electrical Terminals and Ground Specification Rotational 300VAC 1min.: Between terminals 0.02±0.01N・m Torque Withstanding Voltage 300VAC 1min.: Between terminals and Terminal 3N (of static load applied to the tip of the ground Strength terminal once and in any direction) DC100V terminal – 100MΩ ≦ Rotation (1min later) terminal Insulation Resistance Stopper 0.4N・m DC500V terminal – Strength 500MΩ ≦ Mechanical (1minLater) ground Specification Panel Nut Weight 5.5g Tightening 0.8N・m Torque 50,000 strokes (Rotational Torque: ±20% the initial Heat Durability value, Contact Resistance: Not more Resistance of 300℃ ±10℃ , 3±1 sec. than 100mΩ, Insulation Resistance: Solder After 1min 250VDC electrification) Water Water resistant through the mounted Temperature : +40 ± 2℃ Resistance panel (2m deep in the water for 2h) Humidity Proof Relative Humidity : 90 ~ 95% Contact (Duration : 48 ± 2h) 0.4VA (AC&DC) Capacity Maximum 25V (AC&DC) Voltage Warranty Electrical ● 1 year from the date of shipment. Specification Working Electric 0.1mA ~ 50mA (AC&DC) Current Contact 80mΩ max. Resistance Part Number Designation 㻹㻾㻤 㻭㻙㼂㻝㻙 㻙㻙㻙㻜㻥 㻟㻜 㻸㻩㻝㻞 㻙㻙㻾㻿

㻿㼣㼕㼠㼏㼔㻌㻹㼛㼐㼑㼘 㻿㼠㼑㼜㻌㻭㼚㼓㼘㼑 㻟㻜㻦㻌㻟㻜㼻 㻯㼍㼠㼑㼓㼛㼞㼥 㻭㻦㻌㻾㼛㼠㼍㼞㼥㻌㻿㼣㼠㼕㼏㼔 㻸㼑㼚㼓㼠㼔㻌㼛㼒㻌㼠㼔㼑㻌㼟㼔㼍㼒㼠 㻝㻞㻦㻌㻝㻞㼙㼙 㻹㼛㼡㼚㼠㼕㼚㼓㻌㻰㼕㼞㼑㼏㼠㼕㼛㼚 㼂㻦㻌㼂㼑㼞㼠㼕㼏㼍㼘 㻿㼔㼍㼜㼑㻌㼛㼒㻌㼠㼔㼑㻌㼟㼔㼍㼒㼠 㻾㻦㻌㻾㼛㼡㼚㼐 㻼㼛㼘㼑㼟 㻝㻦㻌㻝㻌㼜㼛㼘㼑 㻻㼜㼠㼕㼛㼚㼍㼘㻌㻼㼍㼞㼠㼟 㻞㻦㻌㻞㻌㼜㼛㼘㼑㼟 㻺㼛㼚㼑㻦㻌㻺㼛㻌㼛㼜㼠㼕㼛㼚㻌㼍㼠㼠㼍㼏㼔㼑㼐 㻿㻦㻌㻾㼑㼏㼑㼕㼢㼑㼞㻌㼏㼘㼍㼙㼜 㻼㼛㼟㼕㼠㼕㼛㼚㼟 㻼㻦㻌㼃㼍㼠㼑㼞㼜㼞㼛㼛㼒㻌㼣㼍㼟㼔㼑㼞 㻜㻞䡚㻝㻞㻦㻌㻞䡚㻝㻞㻌㼜㼛㼟㼕㼠㼕㼛㼚㼟㻌㻔㻝㻌㼜㼛㼘㼑㻕 㻿㻼㻦㻌㻾㼑㼏㼑㼕㼢㼑㼞㻌㼏㼘㼍㼙㼜㻌㻒㻌㼃㼍㼠㼑㼞㼜㼞㼛㼛㼒㻌㼣㼍㼟㼔㼑㼞 㻜㻞䡚㻜㻢㻦㻌㻞䡚㻢㻌㼜㼛㼟㼕㼠㼕㼛㼚㼟㻌㻔㻞㻌㼜㼛㼘㼑㼟㻕

Dimensions (mm)

Standard With Support 㼃㼍㼟㼔㼑㼞 MR8A_ 㻹㼛㼡㼚㼠㼕㼚㼓㻌㻼㼍㼚㼑㼘㻌㻦㻌㼠㻩㻌㻟㻚㻟㼙㼙㻌㼙㼍㼤㻚 MR8A_S 㻹㼛㼡㼚㼠㼕㼚㼓㻌㻼㼍㼚㼑㼘㻌㻦㻌㼠㻩㻌㻞㻚㻤㼙㼙㻌㼙㼍㼤㻚 㻝 㻺㼡㼠 㻝㻚㻤 㼀㼛㼟㼛㼗㼡㻌㻸㼛㼓㼛 㼀㼛㼟㼛㼗㼡㻌㻸㼛㼓㼛 㻿㼡㼜㼜㼛㼞㼠㻌㻔㼠㻩㻜㻚㻡㻕 䠩㻢䠄㻼㻩㻜㻚㻣㻡䠅 䠩㻢䠄㻼㻩㻜㻚㻣㻡䠅 㻜 㻙㻜㻚 㻝 㻜 㻙㻜㻚㻝 㻡 㻤 㻤 䃥㻟㻚 㻞 䃥㻟㻚 㻞 㻜㻚 㻡 㻜㻚 㻡 䡐䠙㻜㻚 㻞 㻡 㻢 㻤㻚㻡 㻟㻚㻞 㻡 㻡㻚㻡 㻜㻚㻡 䡐䠙㻜㻚㻞 㻤 㻝㻞 㻥㻚㻝 㻝㻝㻚㻡 㻥 㻟㻚㻡

With Seal Washer (Front panel seal) With Support & Seal Washer (Front panel seal) 㻿㼑㼍㼘㻌㼃㼍㼟㼔㼑㼞㻌㻔㻞㻌㼜㼏㼟㻕 MR8A_P 㻹㼛㼡㼚㼠㼕㼚㼓㻌㻼㼍㼚㼑㼘㻌㻦㻌㼠㻩㻌㻞㻚㻥㼙㼙㻌㼙㼍㼤㻚㻌 MR8A_SP 㻹㼛㼡㼚㼠㼕㼚㼓㻌㻼㼍㼚㼑㼘㻌㻦㻌㼠㻩㻌㻞㼙㼙㻌㼙㼍㼤㻚㻌 㻝 㻿㼑㼍㼘㻌㼃㼍㼟㼔㼑㼞㻌㻔㻝㻌㼜㼏㻕 㻝㻚㻤 㼀㼛㼟㼛㼗㼡㻌㻸㼛㼓㼛 㻿㼡㼜㼜㼛㼞㼠㻌㻔㼠㻩㻜㻚㻡㻕 䠩㻢䠄㻼㻩㻜㻚㻣㻡䠅 㼀㼛㼟㼛㼗㼡㻌㻸㼛㼓㼛 䠩㻢䠄㻼㻩㻜㻚㻣㻡䠅 㻜 㻜 㻙㻜㻚㻝 㻙㻜㻚㻝 㻡 㻤 㻤 䃥㻟㻚 㻞 䃥㻟㻚 㻞 㻜㻚 㻡 㻜㻚 㻡 䡐䠙㻜㻚㻞 㻡 㻡㻚㻢 㻜㻚㻠 䡐䠙㻜㻚㻞 㻡 㻠㻚㻣 㻝㻚㻟 㻤 㻝㻝㻚㻢 㻤㻚㻥 㻟㻚㻞 㻥㻚㻝 㻝㻜㻚㻣 㻥㻚㻤 㻟㻚㻞 䈜㼁㼟㼑㻌㻞㻌㼟㼑㼍㼘㻌㼣㼍㼟㼔㼑㼞㼟 PWB Mounting Hole Dimensions (mm) Standard / With Seal Washer With Support (& Seal Washer) Seal Washer (2 pcs) 䈜Use 2 seal washers Seal Washer (2 pcs) 䈜Use 2 seal washers 㻝㻟䠉䃥㻜㻚㻤㻝㻠䠉䃥㻜㻚㻤 㻝㻟䠉䃥㻜㻚㻤 㻝㻠䠉䃥㻜㻚㻤 㻠㻙䃥㻝㻚㻞 㻠㻙䃥㻝㻚㻞 㻯㻞 㻝 㻞㻟㻟 㻯㻞 㻝 㻞 㻯㻞 㻝 㻞 㻟 㻯㻞 㻝 㻞 㻟 㻝㻚 㻢 㻝㻚 㻢 㻝㻚 㻢 㻝㻚 㻢 㻠 㻠 㻠 㻠 㻝㻞 㻡 㻝㻞 㻡 㻝㻞 㻡 㻝㻞 㻡 㻤 㻤 㻤 㻤 㻣㻚 㻟 㻝㻝 㻢 㻝㻝 㻢 㻝㻝 㻢 㻣㻚 㻟 㻝㻝 㻢 㻝㻜 㻝㻜 㻝㻜 㻝㻜 㻥㻤㻣㻥㻤㻣㻯㻝 㻥㻤㻣 㻯㻝 㻥㻤㻣 㻯㻝 㻝㻚㻢 㻝㻚㻢 㻝㻚㻢 㻝㻚㻢 㻤 㻤 㻤 㻤 㻤㻚㻢 㻤㻚㻢 Mounting Hole Dimension (mm) Accessories Standard / With Seal Washer With Support (& Seal Washer) Nut Washer Seal Washer (1 pc) 䈜䃥㻞㻚㻝

䃥㻢㻚㻞 㻡 䃥㻢㻚 㻞

㻡㻚㻞 㻤 㻢㻚㻞 㻢㻚㻞 㼃㼕㼠㼔㻌㼟㼑㼍㼘㻌㼣㼍㼟㼔㼑㼞㻘 㻤㻚㻡 㻤 㻝㻚 㻢 㻜㻚 㻡 㻌㼗㼑㼑㼜㻌㼠㼔㼑㻌㼔㼛㼘㼑㻌㼏㼘㼛㼟㼑㼐㻚 㻜㻚 㻠 TOKYO SOKUTEIKIZAI CO., LTD.

Code Switch Catalogue

DPP.11 hermetically sealed, long life, various options

MR8CP.15 tightly sealed, 2 types of mouting positions

Digital Code Switch DP Series

Outline DP – the market leading digital code switch – series are designed for use in wide range of industrial instruments.

Features

● High reliability with double gold-plated sliding contacts. ● Eco friendly: 1) Low cost and lesser parts by VA design 2) RoHS compliant ● Step angles: 13.85°, 15°, 20°, 27.69°, 30° ● Various types of codes: real binary, complementary binary, real gray, complementary gray (either inhibit and/or parity circuit enclosed in all codes for safety). Special codes also available. ● Duration of over 50000 switching cycles ● Waterproofed model available

Specifications

Items Rated Value DC250V/ Terminal to 500MΩ ≦ -20℃~ +70℃ After 1min terminal Operating temperature Insulation resistance (-4F ~ 158F) DC500V/ Terminal to Keep the body 5000MΩ ≦ -40℃~ +70℃ unfrozen After1min groung Storage temperature (-40F ~ 158F) AC250/1min Terminal to terminal Withstanding voltage Rotational torque 0.1N ~ 0.2N AC1500V/1min Terminal to ground Terminal strength 3N Load AC 5V 0.5A/ 48V 0.05A Panel nut tightening resistance DC 5V 0.25A/ 25V 0.05A 2N・m torque Rotational Over 50000 times rotations Stopper strength 3N・m Contact ≦ 150mΩ Range 10 ~ 55 ~ 10Hz/min Durability resistance Vibration No defect found after 2h of vibration stroke Insulation Durability DC250V/50mΩ ≦ ,(Over a min) for 1.5mm to each XYZ direction resistance Contact resistance ≦ 100mΩ Warranty ● 1 year from the date of shipment Part Number Designation DP P 01 0 20 J 20 R CB

Switch Model Connector Options Step Angle None: No Connector Attached N: Non Waterproof H: 13.85° CB: Vertically Attached P: Waterproof J: 15° CS: Horizontally Attached N: 30° Length of the Shaft Codes L: 20° 16: 16mm Shape of the Shaft 01: Real Binary Starting Position S: 27.69° 20: 20mm R: Round 02: Complimentary Binary Step Angle Range of the Staring/End Positions 03: Real Gray 04: Complimentary Gray End Position H 13.85° 0 ~ 25 J 15° 0 ~ 23 N 30° 0 ~ 11 L 20° 0 ~ 17 S 27.69° 0 ~ 12 Dimensions (mm)

DPN/DPP DPN/DPP with Connector CB DPN/DPP with Connector CS 㻟 㻟 㻟 㻿㼠㼛㼜㼜㼑㼞 㻿㼠㼛㼜㼜㼑㼞 㻿㼠㼛㼜㼜㼑㼞

䠤 䠤 䠤 䠡 䠥 䠡 䠥 䠡 䠥 䠠 䠠 䠠 䠟 䠟 䠟 㻝㻞 㻝㻞 㻝㻞

䠞 䠞 䠞 㻝㻡㻚 㻟 㻝㻡㻚 㻟 㻝㻡㻚 㻟

䠨 䠨 䠨

䠩 䠩 䠩

䠴 䠴 䠴 㻞㻡 㻞㻡 㻞㻡

䠪 䠪 䠪

䠪 䠪 䠪

䠝 䠝 䠝

䠬 䠬 䠬

䠝 䠝 䠝

䠫 䠫 䠫 䠦 䠦 䠦

䠬 䠬 䠬

䠱 䠱 䠱

䠭 䠭 䠭

䠰 䠰 䠰 䠮 䠮 䠮 䠯 䠯 䠯 㻞㻝 㻞㻝 㻞㻝

䠝 䠣 䠝 䠣 㻞㻚㻡㻠 㻟㻞 㻟㻞 㻟㻟㻚㻡 㻟㻞 㻟㻟㻚㻡 㻟㻟㻚㻡 㻟㻤 㻟㻤 㻟㻤

䠠 䠬䝇䜲䝑䝏 䠠 䠬䝇䜲䝑䝏 䠠 䠬䝇䜲䝑䝏 䠠䠬䠬䠌䠍䠌䠍䠍䠪䠍䠒䠮 䠠䠬䠬䠌䠍䠌䠍䠍䠪䠍䠒䠮 䠠䠬䠬䠌䠍䠌䠍䠍䠪䠍䠒䠮 䠨䡋䡐㻌㻌䉰䠍䠎䠏 䠨䡋䡐㻌㻌䉰䠍䠎䠏 䠌䠍䠪 䠩䠝䠠䠡䚷䠥䠪䚷䠦䠝䠬䠝䠪 䠨䡋䡐㻌㻌䉰䠍䠎䠏 䠌䠍䠪 䠩䠝䠠䠡䚷䠥䠪䚷䠦䠝䠬䠝䠪 䠌䠍䠪 䠩䠝䠠䠡䚷䠥䠪䚷䠦䠝䠬䠝䠪 䠣䠢 䠡䠠 䠟 䠞 䠝 䠣䠢 䠡䠠 䠟 䠞 䠝 䠣䠢 䠡䠠 䠟 䠞 䠝

䠣䠝 㻯㻮㻌㼏㼛㼚㼚㼑㼏㼠㼛㼞 䠣䠝 㻝㻥㻚㻥 㻔㻮㻣㻮㻙㼄㻴㻙㻭䠅 㻞 㻯㻿㻌㼏㼛㼚㼚㼑㼏㼠㼛㼞 㻹㻥㻩㻔㻼㻩㻜㻚㻣㻡㻕 㻞 㻝㻥㻚㻥 㻔㻿㻣㻮㻙㼄㻴㻙㻭㻕 㻹㻥㻩㻔㻼㻩㻜㻚㻣㻡㻕 㻞

㻌㻜 㻙㻜㻚 㻝 㻹㻥㻩㻔㻼㻩㻜㻚㻣㻡㻕 㻌㻜 㻙㻜㻚 㻝 䃥㻢 㻌㻜 㻙㻜㻚 㻝 䃥㻢 䃥㻢

㻤 㻔㻣㻕 㻔㻞㻣㻚㻣㻕 㻸㼼㻝 㻞㻠㼼㻞

㻸㻩㻝㻢㻘㻝㻤㻘㻞㻜 㻸㼼㻝 㻞㻥㼼㻞 㻔㻡㻚㻥 㻕 㻸㻩㻝㻢㻘㻝㻤㻘㻞㻜 㻤 㻔㻢㻚㻝㻕 㻸㼼㻝 㻞㻠㼼㻞 㻸㻩㻝㻢㻘㻝㻤㻘㻞㻜 DP Accessory Precautions

Adapter(for waterproof) ● How to connect panel 㻟㻚㻞 㻰㼛㼡㼎㼘㼑㻙㼟㼠㼕㼏㼗㻌㼠㼍㼜㼑 1. Peer double-sided tape off. 2. Stick double-sided tape to the panel (Pay attention to direction of 䃥㻟㻚㻞 adapter)

㻝㻝㻚 㻤 㻝㻞 䃥㻥㻚㻞 3. Use M9nut, toothed lock washer and washer to tighten panel and

㼼㻜㻚㻜㻡 adapter. 㻥㻚㻝 䈜㻼㼍㼚㼑㼘㻌㼠㼔㼕㼏㼗㼚㼑㼟㼟㻌 4. M9 nut tightening torque shall be up to 2N.m. 㻌㼕㼟㻌㼙㼍㼤㻌㻞㼙㼙㻘㻌㼕㼚㻌㼏㼍㼟㼑㻌 5. Use double-sided tape under clean condition. 㼛㼒㻌㼡㼟㼕㼚㼓㻌㼍㼐㼍㼜㼠㼑㼞㻚 PLEASE NOTE 㻟㻞 㼼㻜㻚㻟 㻜㻚㻤 㻝㻚㻡 㻯㼛㼚㼚㼑㼏㼠㼛㼞 1. Panel thickness shall be up to 2mm(to use adapter) 㻮㼞㼛㼣㼚䠖㻭 㻔㼄㻴㻼㻙㻣㻕 Wire Harness 㻭㼃㻳㻞㻠 2. Panel thickness shall be up to 4mm(without adapter) 㻾㼑㼐䠖㻮 㻭 㻼㻛㻺㻸㻔㼏㼙㻕 㻻㼞㼍㼚㼓㼑䠖㻯 㻮 ● Mounting hole dimensions 㻭㻜㻡㻡㻜 㼅㼑㼘㼘㼛㼣䠖㻰 㻯 㻰

㻭㻝㻡 㻝㻡㻜 㻳㼞㼑㼑㼚䠖㻱 㻱 㻔㻝㻥㻚㻤㻕 1. Make φ9.2 dimensions hole at the panel(to use adapter) 㻭㻟㻜 㻟㻜㻜 㻲 㻮㼘㼡㼑䠖㻲 㻳 2. Check out left example to use without adapter 㻼㼡㼜㼘㼑䠖㻳 㻸 㻔㻣㻚㻣㻕 㻔㻡㻚㻣㻕

Ultra Compact Code Switch MR8C Series

Outline MR8C is an ultra compact rotary code switch with resin enclosure designed especially for – but not limited to - usage in devices with limited space for switch units inside.

Features

● 8mm square compact (8.0x8.0 mm) ● Two different step angles; (22.5°,30) ● Gold plated contacts ● Monolithic sealed structure of the terminals to prevent entry of a soldering flux ● RoHS compliant ● Dripproofed model available

Specifications

-20℃~ +70℃ 100MΩminimum (100VDC 1min.): Operating temperature -4F ~ 158F Keep the body Insulation Between terminals -40℃~ +70℃ unfrozen Resistance 500MΩminimum (500VDC 1min.): Storage temperature -40F ~ 158F Electrical Between Terminals and Ground Specification Rotational 100VAC 1min.: Between terminals 0.02±0.01N・m Torque Withstanding Voltage 500VAC 1min.: Between terminals and Terminal 5N (of static load applied to the tip of the ground Strength terminal once and in any direction) Weight 3.5g Rotation 30,000 strokes Stopper 0.4N・m (Rotational Torque: ±50% the initial Strength Mechanical Durability value, Contact Resistance: Not more Specification Panel Nut than 1Ω, Insulation Resistance: After Tightening 0.6N・m 1min 100VDC electrification) Torque Temperature : +40 ± 2℃ Heat Humidity Proof Relative Humidity : 90 ~ 95% Resistance of 350℃ ±10℃ , 3±1 sec. (Duration : 48 ± 2h) Solder Water Water resistant through the mounted Resistance panel (1m deep in the water for 2h) Warranty Contact ● 1 year from the date of shipment 0.2VA (AC&DC) Capacity Maximum 15V (AC&DC) Voltage Electrical Specification Working Electric 0.1mA ~ 20mA (AC&DC) Current Contact 200mΩ max. Resistance Part Number Designation

㻹㻾㻤 㻯㻙㼂㻜㻙㻙㻟㻜㻙㻙㻭㻝㻙 㻹 㻞㻾㻙㻙㻿

㻿㼣㼕㼠㼏㼔㻌㻹㼛㼐㼑㼘 㻿㼠㼑㼜㻌㻭㼚㼓㼘㼑 㻯㼍㼠㼑㼓㼛㼞㼥 㻹㻦㻌㻞㻞㻚㻡㼻 㻺㻦㻌㻟㻜㼻 㻯㻦㻌㻯㼛㼐㼑㻌㻿㼣㼠㼕㼏㼔 㻹㼛㼡㼚㼠㼕㼚㼓㻌㻰㼕㼞㼑㼏㼠㼕㼛㼚 㻸㼑㼚㼓㼠㼔㻌㼛㼒㻌㼠㼔㼑㻌㼟㼔㼍㼒㼠 㼂㻦㻌㼂㼑㼞㼠㼕㼏㼍㼘 㻝㻞㻦㻌㻝㻞㼙㼙 㻿㼔㼍㼜㼑㻌㼛㼒㻌㼠㼔㼑㻌㼟㼔㼍㼒㼠 㻯㼛㼐㼑㻌㼀㼥㼜㼑 㻾㻦㻌㻾㼛㼡㼚㼐 㻜㻟㻦㻌㻾㼑㼍㼘㻌㻳㼞㼍㼥㻌㻯㼛㼐㼑 㻻㼜㼠㼕㼛㼚㼍㼘㻌㻼㼍㼞㼠㼟 㻿㼠㼍㼞㼠㻌㻼㼛㼟㼕㼠㼕㼛㼚 㻺㼛㼚㼑㻦㻌㻺㼛㻌㼛㼜㼠㼕㼛㼚㻌㼍㼠㼠㼍㼏㼔㼑㼐 㻜䡚㻲㻦㻿㼑㼠㻌㼍㼚㻌㼛㼜㼠㼕㼛㼚㼍㼘㻌㼜㼛㼟㼕㼠㼕㼛㼚㻌㼎㼑㼠㼣㼑㼑㼚㻌㻜䡚㻲㻌㻔㻞㻞㻚㻡㼻㻕 㻿㻦㻌㻾㼑㼏㼑㼕㼢㼑㼞㻌㼏㼘㼍㼙㼜 㻜䡚㻮㻦㻿㼑㼠㻌㼍㼚㻌㼛㼜㼠㼕㼛㼚㼍㼘㻌㼜㼛㼟㼕㼠㼕㼛㼚㻌㼎㼑㼠㼣㼑㼑㼚㻌㻜䡚㻮㻌㻔㻟㻜㼻㻕 㻼㻦㻌㼃㼍㼠㼑㼞㼜㼞㼛㼛㼒㻌㼣㼍㼟㼔㼑㼞 㻿㻼㻦㻌㻾㼑㼏㼑㼕㼢㼑㼞㻌㼏㼘㼍㼙㼜㻌㻒㻌㼃㼍㼠㼑㼞㼜㼞㼛㼛㼒㻌㼣㼍㼟㼔㼑㼞 㻱㼚㼐㻌㻼㼛㼟㼕㼠㼕㼛㼚 㻜䡚㻲㻦㻿㼑㼠㻌㼍㼚㻌㼛㼜㼠㼕㼛㼚㼍㼘㻌㼜㼛㼟㼕㼠㼕㼛㼚㻌㼎㼑㼠㼣㼑㼑㼚㻌㻜䡚㻲㻌㻔㻞㻞㻚㻡㼻㻕 㻜䡚㻮㻦㻿㼑㼠㻌㼍㼚㻌㼛㼜㼠㼕㼛㼚㼍㼘㻌㼜㼛㼟㼕㼠㼕㼛㼚㻌㼎㼑㼠㼣㼑㼑㼚㻌㻜䡚㻮㻌㻔㻟㻜㼻㻕

Dimensions (mm)

㻹㼛㼡㼚㼠㼕㼚㼓㻌㻼㼍㼚㼑㼘㻌㻦㻌㼠㻩㻌㻞㻚㻤㼙㼙㻌㼙㼍㼤㻚 㻝 Standard 㼃㼍㼟㼔㼑㼞 㻹㼛㼡㼚㼠㼕㼚㼓㻌㻼㼍㼚㼑㼘㻌㻦㻌㼠㻩㻌㻟㻚㻟㼙㼙㻌㼙㼍㼤㻚 With Support 㼀㼛㼟㼛㼗㼡㻌㻸㼛㼓㼛 㻺㼡㼠 㻝㻚㻤 㻿㼡㼜㼜㼛㼞㼠㻌㻔㼠㻩㻜㻚㻡㻕 MR8C_ 㼀㼛㼟㼛㼗㼡㻌㻸㼛㼓㼛 MR8C_S 䠩㻢䠄㻼㻩㻜㻚㻣㻡䠅 䠡䠝 䠩㻢䠄㻼㻩㻜㻚㻣㻡䠅 䠡䠝 㻡 㻌㻜 㻙㻜㻚 㻝 㻌㻜 㻙㻜㻚 㻝 㻤 㻜㻚 㻡 㻤 㻜㻚 㻡 㼠㻩㻜㻚 㻞 㼠㻩㻜㻚 㻞 䃥㻟㻚 㻞 䃥㻟㻚 㻞 䠠 䠟 䠞 䠠 䠟 䠞 㻡 㻢㻤㻚㻡 㻟 㻡 㻡㻚㻡 㻜㻚㻡 㻟 㻤 㻝㻞 㻥㻚㻝 㻝㻝㻚㻡 㻥㻟㻚㻡

With Seal Washer With Support & Seal Washer (Front panel seal) 㻹㼛㼡㼚㼠㼕㼚㼓㻌㻼㼍㼚㼑㼘㻌㻦㻌㼠㻩㻌㻞㻚㻥㼙㼙㻌㼙㼍㼤㻚㻌 (Front panel seal) 㻿㼑㼍㼘㻌㼃㼍㼟㼔㼑㼞㻌㻔㻝㻌㼜㼏㻕 㻝 㻿㼑㼍㼘㻌㼃㼍㼟㼔㼑㼞㻌㻔㻞㻌㼜㼏㼟㻕 MR8C_P 㼀㼛㼟㼛㼗㼡㻌㻸㼛㼓㼛 MR8C_SP 㻹㼛㼡㼚㼠㼕㼚㼓㻌㻼㼍㼚㼑㼘㻌㻦㻌㼠㻩㻌㻞㼙㼙㻌㼙㼍㼤㻚 㼀㼛㼟㼛㼗㼡㻌㻸㼛㼓㼛 䠡䠝 䠩㻢䠄㻼㻩㻜㻚㻣㻡䠅 㻝㻚㻤 㻿㼡㼜㼜㼛㼞㼠㻌㻔㼠㻩㻜㻚㻡㻕 䠡䠝 䠩㻢䠄㻼㻩㻜㻚㻣㻡䠅 㻌㻜 㻙㻜㻚 㻝 㻡 㻤 㻜㻚 㻡 㻌㻜 㻙㻜㻚 㻝 㻤 㼠㻩㻜㻚 㻞 㻜㻚 㻡 䃥㻟㻚 㻞 㼠㻩㻜㻚 㻞 䠠 䠟 䠞 䃥㻟㻚 㻞 㻡 㻡㻚㻢 㻜㻚㻠 㻟 䠠 䠟 䠞 㻤 㻝㻝㻚㻢 㻤㻚㻥 㻡 㻠㻚㻣㻝㻚㻟 㻟 㻥㻚㻝 㻝㻜㻚㻣 㻥㻚㻤 㻟㻚㻝 䈜㼁㼟㼑㻌㻞㻌㼟㼑㼍㼘㻌㼣㼍㼟㼔㼑㼞㼟 PWB Mounting Hole Dimensions (mm) Code table Standard / With Seal Washer With Suppoet (+ Seal Washer) 㻞㻞㻚㻡㼻㻿㼠㼑㼜㻌㼍㼚㼓㼘㼑 㻡㻙䃥㻜㻚㻤 㻡㻙䃥㻜㻚㻤 䖃㼕㼚㼐㼕㼏㼍㼠㼑㼟㻌㼠㼑㼞㼙㼕㼚㼍㼘 䠐䠉䃥䠍䠊䠎 㻯㼛㼐㼑㻌㼀㼥㼜㼑㻌㻜㻟㻌㻔㻾㼑㼍㼘㻌㼓㼞㼍㼥㻌㼏㼛㼐㼑㻕 䚷㻌㼏㼛㼚㼚㼑㼏㼠㼕㼛㼚㻌㼠㼛㻌㼏㼛㼙㼙㼛㼚 㼀㼑㼞㼙㼕㼚㼍㼘 㻮㼕㼠㻌㻺㼛㻚 㻿㼣㼕㼠㼏㼔㻌㻼㼛㼟㼕㼠㼕㼛㼚 㻺㼛㻚 䠌䠍䠎䠑䠏 䠐䠒䠓䠔䠕䠞䠝 㻯㻰㻱 㻲 䠡 䠝 䠡 䠝 䈜㻝 㻭 㻝 䖃䖃 䖃䖃 䖃䖃 䖃 䖃 㻱 㻞 䖃䖃䖃䖃 䖃 䖃 䖃 䖃

㻤㻚㻠 䖃䖃䖃䖃䖃 䖃 䖃 䖃

㻤㻚 㻠 㻣㻚 㻟 䠞 㻠 䠠䠟䠞 䠠䠟䠞 䠠 㻤 䖃 䖃 䖃䖃䖃 䖃 䖃䖃 䠟 㼏㼛㼙㼙㼛㼚

㻞㻞 㻞㻞 㻟㻜㼻㻿㼠㼑㼜㻌㼍㼚㼓㼘㼑 䖃㼕㼚㼐㼕㼏㼍㼠㼑㼟㻌㼠㼑㼞㼙㼕㼚㼍㼘 㻤㻚㻢 㻯㼛㼐㼑㻌㼀㼥㼜㼑㻌㻜㻟㻌㻔㻾㼑㼍㼘㻌㼓㼞㼍㼥㻌㼏㼛㼐㼑㻕 䚷㻌㼏㼛㼚㼚㼑㼏㼠㼕㼛㼚㻌㼠㼛㻌㼏㼛㼙㼙㼛㼚 㼀㼑㼞㼙㼕㼚㼍㼘 㻮㼕㼠㻌㻺㼛㻚 㻿㼣㼕㼠㼏㼔㻌㻼㼛㼟㼕㼠㼕㼛㼚 㻺㼛㻚 䠌䠍䠎䠑䠏 䠐䠒䠓䠔䠕䠞䠝 䈜㻝 㻱 㻝 䖃䖃 䖃䖃 䖃䖃 㻭 㻞 䖃䖃䖃䖃 䖃 䖃 䠞 㻠 䖃䖃䖃䖃䖃 䖃 䖃 䖃 Mounting Hole Dimension (mm) 䠠 㻤 䖃 䖃 䖃䖃 䠟 㼏㼛㼙㼙㼛㼚 Standard / With Seal Washer With Suppoet (+ Seal Washer) 䖃㼕㼚㼐㼕㼏㼍㼠㼑㼟㻌㼠㼑㼞㼙㼕㼚㼍㼘 㻯㼛㼐㼑㻌㼀㼥㼜㼑㻌㻜㻝㻌㻔㻾㼑㼍㼘㻌㼎㼕㼚㼍㼞㼥㻌㼏㼛㼐㼑㻕䚷㻌㼏㼛㼚㼚㼑㼏㼠㼕㼛㼚㻌㼠㼛㻌㼏㼛㼙㼙㼛㼚 㼀㼑㼞㼙㼕㼚㼍㼘 㻮㼕㼠㻌㻺㼛㻚 㻿㼣㼕㼠㼏㼔㻌㻼㼛㼟㼕㼠㼕㼛㼚 䈜䃥㻞㻚㻝 㻺㼛㻚 䠌䠍䠎䠑䠏 䠐䠒䠓䠔䠕䠞䠝 㻰 㻝 䖃䖃䖃䖃䖃䖃 㻮 㻞 䖃䖃 䖃 䖃 䖃 䖃 䃥㻢㻚㻞 㻱 㻠 䖃䖃䖃䖃 㻭 㻤 䖃䖃䖃䖃

㻡 㻯 㼏㼛㼙㼙㼛㼚 㻭㼠㼠㼑㼚㼠㼕㼛㼚㻦㻌㼀㼑㼞㼙㼕㼚㼍㼘㻌㻭㻌㼍㼚㼐㻌㻱㻌㼛㼒㻌㻟㻜㼻㼕㼟㻌㼞㼑㼢㼑㼞㼟㼑㻌㼠㼛㻌㻞㻞㻚㻡㼻㻚 䃥㻢㻚 㻞

㻡㻚㻞 㼃㼕㼠㼔㻌㼟㼑㼍㼘㻌㼣㼍㼟㼔㼑㼞㻘 㼗㼑㼑㼜㻌㼠㼔㼑㻌㼔㼛㼘㼑㻌㼏㼘㼛㼟㼑㼐㻚 TOKYO SOKUTEIKIZAI CO., LTD.

Rotary Encoder Catalogue

RE29P.19 thin, lightweight, resin shaft/case

RE25P.21 waterproof model available, operated at 3.3V/5V

RE24P.23 dual (inner/outer) shaft: inner for push button, outer for rotation

RE23P.25 push button function added to the rotating shaft, low price

Ultra Slimline Rotary Encoder with Push Switch RE29 Series Outline RE29 series pack compact rotary encoder with dual-functional resin shaft into the space-saving resin enclosure. RE29 is recommended for wide range of machines including measurement components, medical and telecommunication devices.

Features

● Extremely thin (6.6mm) and lightweight (7g) ● Multi-functional with 2 way acting – push switch function and rotating function – shaft ● Eco friendly: 1) Low cost and lesser parts by VA design 2) RoHS compliant ● Designed to be soldered to printed circuit board

Specifications

1. Electrical and Mechanical specifications 2. Reliability and Environmental Specifications Items Rated Value Items Rated Value Number of Pulses 6 PPR Thrust Push 100N Durability of Number of Clicks 24 Clicks direction Pull 50N operating area DC3.3V ± 5% ≦ 20mA 6mA TYP Radial 1N・m Supply Voltage DC5V ± 5% ≦ 10mA 4mA TYP Rotational durability 1 million strokes (No load) Channel A/B: Square Wave CMOS Screw Torque Not more than 1N・m Output Signals Rotary chip Heat resistance Solder bit temp.: Encoder Within 3 seconds for each terminal Output High (Supply Voltage - 2.5V) ≦ of solder MAX 350℃ Voltage Low ≦ 0.5V -0℃ +55℃ Operating temperature ~ Response 32F 131F 100Hz Frequency - 40℃ +85℃ Storage temperature ~ Rotational - 40F 185F 4 ± 2 mN・m Torque Resistance Rating of contact ≦ DC12V 0.1 ~ 10mA Push ( load ) Output Waveform switch Travel of switch 0.2 ± 0.1 mm 1) Turning the shaft clockwise will generate the signal A when the signal B Operational ± 2 N outputs a low voltage (0); Weight 7g 2) Rotating the shaft counter-clockwise will generate the signal A when the signal B outputs a high voltage(1); 3) Either signal A or B switches from 0→1 or 1→0 for every single click (Quad edge evaluation spec).

㻯㼘㼛㼏㼗㼣㼕㼟㼑 㻯㼛㼡㼚㼠㼑㼞㼏㼘㼛㼏㼗㼣㼕㼟㼑 㻝 㻼㼔㼍㼟㼑㻌㻭 㻜 㻝 㻼㼔㼍㼟㼑㻌㻮 㻜

㻯㼘㼕㼏㼗㻌㼜㼛㼟㼕㼠㼕㼛㼚 Part Number Designation

RE29 N F 6 S H 8 R B

Series 6 pulses Power Voltage Push switch A 5V operational force : 5N Non Waterproof B 3.3V

Rotational Torque : Rouond shaft 4mN ・ m Front Attach Supply 8 ; 8mm 12 ; 12mm

Dimensions (mm)

㻼㼃㻮㻌㻔㼙㼍㼤㻌㻞㼙㼙㻕㻼㼃㻮㻌㻔㼙㼍㼤㻌㻞㼙㼙㻕 㻸㼛㼠㻌㻺㼛㻸㼛㼠㻌㻺㼛㻚 㻚

䠮䠡䠎䠕䚷䠒䠬 䠮䠡䠎䠕䚷䠒䠬 㻥㻚 㻡 㻌㻜 㻙㻜㻚 㻝 㻥㻚 㻡 䠒䠯䠤䚷䠍䠎䠏 䃥㻢 㻌㻜 㻙㻜㻚 㻝

㻞㻡㻚 㻡 䠒䠯䠤䚷䠍䠎䠏 㻝㻝㻚 㻣 䃥㻢 䠩 䠍䠎䠕䠐䠲䠉䠌䕦 㻞㻡㻚 㻡 䠑䠲 䠝 䠞 䠯 䠯 䠌䠲

㻝㻝㻚 㻣 䠩 䠍䠎䠕䠐䠲䠉䠌䕦 䠒 䠑䠍䠐 䠏 䠎 䠍䠒䠎䠏䠐䠑 㻝㻡 䕕㻜㻚㻢㻟 㻟㻚㻝 㻝㻤㻚㻢 㻟㻚㻡 䠑䠲 䠝 䠞 䠯 䠯 䠌䠲 㻠㻚㻡 㻢㻚㻞 䠒 䠑䠍䠐 䠏 䠎 㻸㼼㻝 㻢㻚㻢 䠍䠒䠎䠏䠐䠑 㻝㻡 䕕㻜㻚㻢㻟 㻟㻚㻝 㻝㻤㻚㻢 㻟㻚㻡 㻠㻚㻡 㻢㻚㻞 PWB mounting hole dimensions (mm) 㻸㼼㻝 㻢㻚㻢

Circuitry 㻢

5V 3.3V PWB mounting䃥㻤㻚 㻠hole dimensions (mm) 㻝㻚㻗㼂 㻗㼂 㻝㻜㻙䃥㻝 㻤㻚 㻞 䠍 䠏䠊䠏䠲䠋䠑䠲 㻿㼡㼜㼜㼘㼥 㻝㻠 㻌㻭 䠎 䠝 㻿㼕㼓㼚㼍㼘㻌㻭 㻝㻤㻚㻟 㻞㻚㻭 䠏 䠞 㻿㼕㼓㼚㼍㼘㻌㻮 㻌㻮 䠯 㻼㼡㼟㼔㻌㻿㼣㼕㼠㼏㼔

䠐 㻢 㻌㻿 㻝㻞㻚㻡 㻟㻚㻮 䠑 䠯 㻼㼡㼟㼔㻌㻿㼣㼕㼠㼏㼔 㻌㻿 䠒 䠌䠲 㻳㼞㼛㼡㼚㼐 㻠㻚㻜㼂 㻜㼂 㻡㻚㻿 䃥㻤㻚㻠 㻝㻜㻙䃥㻝 㻤㻚 㻞 㻢㻚㻿 㻝㻠 Precautions Warranty 㻝㻤㻚㻟 ● 1 year from the date of shipment Use buffering amplifier when extending Wiring lead wire over 30cm. 㻝㻞㻚㻡 Do not put a load on the terminal area Soldering during and immediately after soldering. Do not use flow/reflow soldering Operation machines. Use under specified power voltage and Power connect properly. Optical Rotary Encoder RE25 Series Outline RE25 is a VA designed eco friendly – power-saving and low cost with lesser parts – rotary encoder. Its size, mounting procedures and inner-structures have been designed for a wide-array of uses; measurement devices, medical equipments, industrial machineries, telecommunication devices and machine tools. Features

● Eco friendly: 1) Power-saving 2) Low cost and lesser parts by VA design 3) RoHS compliant ● Thin-line (18.8x25.5x8.9mm) and lightweight (18g) ● Various types of models with options: lead wire with or without connector, clamp for horizontal/vertical mounting ● Long-lasting without “contact chatter” due to its optical switching function ● Waterproofed model available

Specifications

1. Electrical and Mechanical specifications 2. Reliability and Environmental specifications Items Rated Value Items Rated Value Number of pulses 16PPR, 25PPR Thrust Push 100N Durability of 3.3V±10% 5V±10% direction Pull 50N Supply voltage operating area 20mA 10mA Radial 1N・m Output signals Channel A/B: Square Wave CMOS chip Light: S High Supply Voltage(3.3V): - 0.3V ≦ , (5V): - 0.5V ≦ Rotational Standard: C 1 million strokes (No load) Output voltage Low ≦ 0.4V durability Medium: M Response frequency 200Hz High: H 100 thousand strokes (No load) Light: S 4±1mN・m Screw Torque Not more than 1N・m Standard: C 6±2mN・m Heat resistance Solder bit temp.: Rotational Within 3 seconds for each terminal Torque Medium: M 10.5±3.5mN・m of solder MAX 350℃ 0℃ +55℃ High: H 16±5mN・m Operating temperature ~ 32F 131F Weight 18g - 40℃ +85℃ Storage temperature ~ - 40F 185F Output Waveform

1) Turning the shaft clockwise will generate the signal A when the signal B outputs a low voltage (0); 2) Rotating the shaft counter-clockwise will generate the signal A when the signal B outputs a high voltage(1); 3) Detent positions are where both signal A and B are low (0).

㻯㼘㼛㼏㼗㼣㼕㼟㼑 㻯㼛㼡㼚㼠㼑㼞㼏㼘㼛㼏㼗㼣㼕㼟㼑 㻝 㻼㼔㼍㼟㼑㻌㻭 㻜 㻝 㻼㼔㼍㼟㼑㻌㻮 㻜

㻰㼑㼠㼑㼚㼠㻌㼜㼛㼟㼕㼠㼕㼛㼚 RE25 5V Waterproofing Power Operation Soldering Wiring 㼀㼑㼞㼙㼕㼚㼍㼘㻌㼚㼡㼙㼎㼑㼞 㼀㼑㼞㼙㼕㼚㼍㼘㻌㼚㼡㼙㼎㼑㼞 Precautions Circuitry RE25NC /RE25PC(withwire RE25NS/RE25PS Series C N V P S F 䠐䠏䠎䠍 䠐䠏䠎䠍 㻝㻤㻚㻤 㻝㻤㻚㻤 Vortical Mount 㻝㻡 㻝㻡 Front Mount Waterproof RE25 With wire Standard more than 1.5N more of Do notfastentighter withthetorque connect properly. Use underspecifiedpowervoltage and machines. soldering Do notuseflow/reflow during andimmediatelyaftersoldering. area Do notputaloadontheterminal over30cm. lead wire amplifierwhenextending Use buffering Wiring Yes No 㻠㻙䃥㻝 㻠㻙䃥㻞

㻠㻚㻜㼂 㻟㻚㻮 㻞㻚㻭 㻝㻚㻗㼂 㻝㻝㻚㻣 㻥㻚㻡 㻝㻝㻚㻣 㻥㻚㻡 㻞㻡㻚㻡 㻞㻡㻚㻡 ) RE25 3.3V ・ N m. 㻌㻜 㻌㻜

䃥㻢 㻙㻜㻚㻝 㻹㻥㻌㼀㼛㼛㼠㼔㼑㼐㻌㼘㼛㼏㼗㻌㼣㼍㼟㼔㼑㼞

䃥㻢 㻙㻜㻚㻝 㻹㻥㻌㼀㼛㼛㼠㼔㼑㼐㻌㼘㼛㼏㼗㻌㼣㼍㼟㼔㼑 㻹㻥䠄㻼㻩㻜㻚㻣㻡䠅 㻹㻥䠄㻼㻩㻜㻚㻣㻡䠅 㻹㻥㻌㼃㼍㼟㼔㼑㼞 㻹㻥㻌㼃㼍㼟㼔㼑㼞 㻹㻥㻌㻺㼡㼠 㻹㻥㻌㻺㼡㼠 㻝㻢㼛㼞㻞㻜 㻝㻢㼛㼞㻞㻜 Part NumberDesignation Part S 㻤 㻤 Non 25 16 M C H S 㻼㼍㼚㼑㼘㻌㼠㼔㼕㼏㼗㼚㼑㼟㼟㻌㻦㻌㼠㻩㻟㻚㻡㼙㼙㻌㼙㼍㼤㻚 Dimensions (mm) 㻤㻚㻥 㼃㼍㼟㼔㼑㼞㻌㼒㼛㼞㻌㼣㼍㼠㼑㼞㼜㼞㼛㼛 㻤㻚㻥 Ckick W/O With 㻠㻚㻜㼂 㻟㻚㻮 㻞㻚㻭 㻝㻚㻗㼂 25 25PPR 16PPR Pulse 㼒

䃥㻥㻚㻞 㻝㻡㻜㼙㼍㼤㻚 PWB mountingholedimensions(mm) Te Rotation Torque ● 䠍 䠐 䠏 䠎 㻤㻙䃥㻝 Warranty ≦4mN・m r 05N・m ・ 10.5mN 1 year from thedateofshipment. 1yearfrom 6N・m ・ 16mN minal number 䠌䠲 㼀㼑㼞㼙㼕㼚㼍㼘㻌㼚㼡㼙㼎㼑㼞 㼀㼑㼞㼙㼕㼚㼍㼘㻌㼚㼡㼙㼎㼑㼞 m m ・ 6mN 4mN m 㻞㻚㻡㽢㻟 䠞䠝 㻝㻤㻚㻢 RE25NV/RE25PV (ver RE25NF (fro C 䠏䠊䠏䠲䠋䠑 䠑䠲 RE25NF 䠌䠲 䠞 䠝 䠲 䠐䠏䠎䠍 㻝㻝 㻢 䠐䠏䠎 㻝㻤㻚㻤 㻝㻤㻚㻤 㻝㻡 㻝㻠 㻝㻡 nt mount) 20 䠍 㻿㼕㼓㼚㼍㼘㻌 㻿㼕㼓㼚㼍㼘㻌 㻳㼞㼛㼡㼚㼐 㻿㼡㼜㼜㼘㼥 㻤㻙䃥㻝 䠑䠲 㻠㻙䕕㻜㻚㻢㻠 㻠㻙䕕㻜㻚㻢㻠 㻞㻚㻡㽢㻟 䠝 㻝㻤㻚㻢 㻮 㻭 tical mount) 䠞 㻝㻝㻚㻣 㻥㻚㻡 㻝㻝㻚㻣 㻥㻚㻡 䠌䠲 RE25_V 㻞㻡㻚㻡 㻞㻡㻚㻡 R

㻝㻟㻚㻢 㻤㻚㻢 㻝㻠 㻌㻜 Mounting holedimensions(mm) 䃥㻢 㻙㻜㻚㻝 㻹㻥㻌㼀㼛㼛㼠㼔㼑㼐㻌㼘㼛㼏㼗㻌㼣㼍㼟㼔㼑㼞 㻤㻚㻞 㻌㻜

䃥㻢 㻙㻜㻚㻝 㻹㻥㻌㼀㼛㼛㼠㼔㼑㼐㻌㼘㼛㼏㼗㻌㼣㼍㼟㼔㼑㼞 㻹㻥䠄㻼㻩㻜㻚㻣㻡䠅 20 16 A B A R 㻹㻥㻌㼃㼍㼟㼔㼑㼞 㻹㻥㻌㻺㼡㼠 㻹㻥䠄㻼㻩㻜㻚㻣㻡䠅 㻝㻢㼛㼞㻞㻜 㻹㻥㻌㼃㼍㼟㼔㼑㼞 㻹㻥㻌㻺㼡㼠 Power Voltage 㻝㻢㼛㼞㻞㻜 Shaft Shape Shaft length 䃥㻥㻚㻞 㻤 㻤 Round 20mm 16mm 㻼㼃㻮㻌㼠㼔㼕㼏㼗㼚㼑㼟㼟㻌㻦㻌㼠㻩㻞㻚㻜㼙㼙㻌㼙㼍㼤㻚 3.3V 㻼㼍㼚㼑㼘㻌㼠㼔㼕㼏㼗㼚㼑㼟㼟㻌㻦㻌㼠㻩㻟㻚㻡㼙㼙㻌㼙㼍㼤㻚 5V 㻥㻚㻤 㻤㻚㻥 㻟㻚㻟 㻞㻚㻣 㻥㻚㻠 㻼㼃㻮㻌㼠㼔㼕㼏㼗㼚㼑㼟㼟㻌㻦㻌㼠㻩㻞㻚㻜㼙㼙㻌㼙㼍㼤㻚 㻞㻚㻣 Rotary Encoder with Dual Functional Shaft RE24 Series Outline RE24 rotary encoder series contain unique mechanism for its shaft; its rotational outer axis for rotary encoder and the inner axis for push switch. RE24 is designed for use in various industrial areas: measurement component, medical equipment, industrial machinery, telecommunication device and machine tool. Features

● Dual inner/outer axes mechanism to help prevent misoperation ● Eco friendly: 1) Low cost and lesser parts by VA design 2) RoHS compliant ● Thin-line (18.8x25.5x8.9mm) and lightweight (18g) ● Long-lasting without “contact chatter” due to its optical switching function ● Specially designed knob (GG60) available

Specifications

1. Electrical and Mechanical specifications 2. Reliability and Environmental specifications Items Rated Value Items Rated Value Number of pulses 16PPR, 25PPR Thrust Push 100N Durability of 3.3V±10% 5V±10% direction Pull 50N Supply voltage operating area 20mA 10mA Radial 1N・m Output signals two square wave output (A/B), CMOS chip Light: S High (Supply Voltage - 0.5V) ≦ Rotational Standard: C 1 million strokes (No load) Output voltage Low ≦ 0.5V durability Medium: M Response frequency 200Hz High: H 100 thousand strokes (No load) Light: S 4±1mN・m Screw Torque Not more than 1N・m Standard: C 6±2mN・m Heat resistance Solder bit temp.: Rotational Within 3 seconds for each terminal torque Medium: M 10.5±3.5mN・m of solder MAX 350℃ 0℃ +55℃ High: H 16±5mN・m Operating temperature ~ 32F 131F Rating of ≦ DC12V 0.1 ~ 10mA - 40℃ +85℃ contact Storage temperature ~ - 40F 185F Travel of 0.2±0.1mm Push switch switch S 3.2±1N Operational Output Waveform M 4.0±1N Force 1) Turning the shaft clockwise will generate the signal A when the signal B H 5.0±1N outputs a low voltage (0); Weight 18g 2) Rotating the shaft counter-clockwise will generate the signal A when the Note : In case Rotational Torque M or H, Operational Torque should be either M or H. signal B outputs a high voltage(1); 3) Detent positions are where both signal A and B are low (0).

㻯㼘㼛㼏㼗㼣㼕㼟㼑 㻯㼛㼡㼚㼠㼑㼞㼏㼘㼛㼏㼗㼣㼕㼟㼑 㻝 㻼㼔㼍㼟㼑㻌㻭 㻜 㻝 㻼㼔㼍㼟㼑㻌㻮 㻜

㻰㼑㼠㼑㼚㼠㻌㼜㼛㼟㼕㼠㼕㼛㼚 Part Number Designation

RE24 N S 25 C S 16/24 R A

Series Pulse Push Switch Power Voltage Waterproof 16 16PPR Force A 5V N No 25 25PPR S 3.2N B 3.3V H 5N Shaft Shape Ckick Rotation Torque Wiring F Flat S Standard S 4mN ・ m C With Code C 6mN ・ m With Shaft length F Front Mount M 10.5mN ・ m 16 16mm (inner) V Vortical Mount H 16mN ・ m 20 24mm (outer) Non W/O ≦4mN・m 㼀㼑㼞㼙㼕㼚㼍㼘㻌㼚㼡㼙㼎㼑㼞 䠍 䠏䠊䠏䠲䠋䠑䠲 㟁※㟁ᅽ Dimensions (mm) 䠎 䠝 䠝┦ฟຊ 䠏 䠞 䠞┦ฟຊ 㻹㻥㻌㼃㼍㼟㼔㼑㼞 䠐 䠌䠲 䠌䠲 RE24NS 㻹㻥㻌㼀㼛㼛㼠㼔㼑㼐㻌㼘㼛㼏㼗㻌㼣㼍㼟㼔㼑㼞 㻼㼍㼚㼑㼘㻌㼠㼔㼕㼏㼗㼚㼑㼟㼟㻌㻦㻌㼠㻩㻟㻚㻡㼙㼙㻌㼙㼍㼤㻚 RE24NF (front mount) 㻹㻥㻌㼃㼍㼟㼔㼑㼞 㻹㻥㻌㻺㼡㼠 㻹㻥㻌㼀㼛㼛㼠㼔㼑㼐㻌㼘㼛㼏㼗㻌㼣㼍㼟㼔㼑㼞 㻼㼃㻮㻌㼠㼔㼕㼏㼗㼚㼑㼟㼟㻌㻦㻌㼠㻩㻞㻚㻜㼙㼙㻌㼙㼍㼤㻚 䠑 䠯 䝥䝑䝅䝳䝇䜲䝑䝏 㻹㻥䠄㻼㻩㻜㻚㻣㻡䠅 㻹㻥㻌㻺㼡㼠 䠯 㻣 㻣 㻹㻥䠄㻼㻩㻜㻚㻣㻡䠅 䠒 䝥䝑䝅䝳䝇䜲䝑䝏 㻣 㻣 㻥㻚 㻡 㻥㻚 㻡 㻞㻡㻚 㻡 㻟 㻞㻡㻚 㻡 㻝㻝㻚 㻣 㻟 䃥㻠 㻡㻚 㻟 䃥㻢 㻝㻝㻚 㻣 䃥㻠 䃥㻢 㻡㻚 㻟

䠒䠍䠑䠐䠏䠎 㻢㻙䃥㻞 㻤 㻝㻡 䠒䠍䠑䠐䠏䠎 㻢㻙䃥㻝 㻝㻢 㻝㻡 㻤 㼀㼑㼞㼙㼕㼚㼍㼘㻌㼚㼡㼙㼎㼑㼞 㻝㻤㻚㻤 㻢㻙䕕㻜㻚㻢㻠 㻞㻚㻣 㻞㻠 㻤㻚㻥 㼀㼑㼞㼙㼕㼚㼍㼘㻌㼚㼡㼙㼎㼑㼞 㻝㻤㻚㻤 㻝㻢 㻞㻠 㻟㻚㻟 㻥㻚㻠

㻹㻥㻌㼃㼍㼟㼔㼑㼞 㻹㻥㻌㼃㼍㼟㼔㼑㼞 RE24NF (front mount) 㻹㻥㻌㼀㼛㼛㼠㼔㼑㼐㻌㼘㼛㼏㼗㻌㼣㼍㼟㼔㼑㼞 㻼㼍㼚㼑㼘㻌㼠㼔㼕㼏㼗㼚㼑㼟㼟㻌㻦㻌㼠㻩㻟㻚㻡㼙㼙㻌㼙㼍㼤㻚 RE24NV (vertical mount) 㻹㻥㻌㼀㼛㼛㼠㼔㼑㼐㻌㼘㼛㼏㼗㻌㼣㼍㼟㼔㼑㼞 㻼㼍㼚㼑㼘㻌㼠㼔㼕㼏㼗㼚㼑㼟㼟㻌㻦㻌㼠㻩㻟㻚㻡㼙㼙㻌㼙㼍㼤㻚 㻹㻥㻌㻺㼡㼠 㻹㻥㻌㻺㼡㼠 㻹㻥䠄㻼㻩㻜㻚㻣㻡䠅 㻹㻥䠄㻼㻩㻜㻚㻣㻡䠅 㻣 㻣 㻣 㻣 㻼㼃㻮㻌㼠㼔㼕㼏㼗㼚㼑㼟㼟㻌㻦㻌㼠㻩㻞㻚㻜㼙㼙㻌㼙㼍㼤㻚 㻥㻚 㻡 㻥㻚 㻡 㻟 㻞㻡㻚 㻡 㻞㻡㻚 㻡 䃥㻠 㻝㻝㻚 㻣 㻡㻚 㻟 䃥㻢 㻝㻝㻚 㻣 䃥㻠 䃥㻢 㻝㻡㻜㼙㼍㼤 㻚 㻡㻚 㻟

䠒䠍䠑䠐䠏䠎 㻤 䠒䠍䠑䠐䠏䠎 㻤 㻝㻡 㻝㻢 㻝㻡 㻝㻢 㻤㻚㻥 㼀㼑㼞㼙㼕㼚㼍㼘㻌㼚㼡㼙㼎㼑㼞 㻝㻤㻚㻤 㻞㻠 㻤㻚㻥 㻝㻤㻚㻤 㻞㻠 㻥㻚㻤 㻞㻚㻣

Circuitry

RE24 5V RE24 3.3V Terminal number 㻗㼂 㻗㼂 䠍 䠏䠊䠏䠲䠋䠑䠲 㻿㼡㼜㼜㼘㼥 Mounting hole dimensions (mm) 䠎 䠝 㻿㼕㼓㼚㼍㼘㻌㻭 䃥㻥㻚㻞 㻭 㻭 䠏 䠞 㻿㼕㼓㼚㼍㼘㻌㻮 㻤㻚 㻞 䠐 䠌䠲 㻳㼞㼛㼡㼚㼐 㻮 㻮 䠑 䠯 㻼㼡㼟㼔㻌㻿㼣㼕㼠㼏㼔 䠒 䠯 㻼㼡㼟㼔㻌㻿㼣㼕㼠㼏㼔 㻜㼂 㻜㼂 㻿 㻿

㻿 㻿 PWB mounting hole dimensions (mm)

㻝㻜㻙䃥㻝 Precautions 㻝㻜㻙䃥㻝 㻤㻚 㻢 㻢 Use buffering amplifier when extending Wiring 䃥㻥㻚㻞

lead wire over 30cm. 㻝㻝 㻝㻠 㻝㻠 Do not put a load on the terminal area 㻝㻟㻚 㻢 Soldering 䠯䠯䠌䠲 䠞䠝䠑䠲 䠑䠲 䠝 䠞 䠌䠲 䠯 䠯 during and immediately after soldering. 㻞㻚㻡㽢㻡 㻞㻚㻡㽢㻡 Do not use flow/reflow soldering 㻝㻤㻚㻢 㻝㻤㻚㻢 Operation machines. RE24NF RE24NV Use under specified power voltage and Power connect properly. Warranty Do not fasten tighter with the torque of Waterproofing ● 1 year from the date of shipment. more than 1.5N・m. 09.12 Optical Rotary Encoder with Push Switch RE23 Series Outline RE23 series are optical rotary encoders with dual functions of pushing and rotating on its shaft. Its size, mounting procedures and inner-structures have been designed for a wide-array of uses; measurement devices, medical equipments, industrial machineries, telecommunication devices and machine tools.

Features

● Multi-functional with 2 way acting – pushing and rotating – shaft ● Eco friendly: 1) Low cost and lesser parts by VA design 2) RoHS compliant ● Thin-line (18.8x25.5x8.9mm) and lightweight (18g) ● Various types of models with options: lead wire with or without connector, clamp for horizontal/vertical mounting ● Long-lasting without “contact chatter” due to its optical switching function

Specifications

1. Electrical and Mechanical specifications 2. Reliability and Environmental specifications Items Rated Value Items Rated Value Number of pulses 16PPR, 25PPR Thrust Push 100N Durability of 3.3V±10% 5V±10% direction Pull 50N Supply voltage operating area 20mA 10mA Radial 1N・m Output signals Channel A/B: Square Wave CMOS chip Light: S High (Supply Voltage - 0.5V) ≦ Rotational Standard: C 1 million strokes (No load) Output voltage Low ≦ 0.5V durability Medium: M Response frequency 200Hz High: H 100 thousand strokes (No load) Light: S 4±1mN・m Screw Torque Not more than 1N・m Standard: C 6±2mN・m Heat resistance Solder bit temp.: Rotational Within 3 seconds for each terminal torque Medium: M 10.5±3.5mN・m of solder MAX 350℃ 0℃ +55℃ High: H 16±5mN・m Operating temperature ~ 32F 131F Rating of ≦ DC12V 0.1 ~ 10mA - 40℃ +85℃ contact Storage temperature ~ - 40F 185F Travel of 0.2±0.1mm Push switch switch S 3.2±1N Operational Output Waveform M 4.0±1N Force 1) Turning the shaft clockwise will generate the signal A when the signal B H 5.0±1N outputs a low voltage (0); Weight 18g 2) Rotating the shaft counter-clockwise will generate the signal A when the Note : In case Rotational Torque M or H, Operational Torque should be either M or H. signal B outputs a high voltage(1); 3) Detent positions are where both signal A and B are low (0).

㻯㼘㼛㼏㼗㼣㼕㼟㼑 㻯㼛㼡㼚㼠㼑㼞㼏㼘㼛㼏㼗㼣㼕㼟㼑 㻝 㻼㼔㼍㼟㼑㻌㻭 㻜 㻝 㻼㼔㼍㼟㼑㻌㻮 㻜

㻰㼑㼠㼑㼚㼠㻌㼜㼛㼟㼕㼠㼕㼛㼚 Part Number Designation

RE23 N S 25 C S 20 R A

Series Pulse Push Switch Power Voltage Waterproof 16 16PPR Force A 5V N No 25 25PPR S 3.2N B 3.3V H 5N Shaft Shape Ckick Rotation Torque Wiring R Round S Standard S 4mN ・ m C With wire C 6mN ・ m With Shaft length F Front Mount M 10.5mN ・ m 16 16mm V Vortical Mount H 16mN ・ m 20 20mm Non W/O ≦4mN・m

Dimensions (mm)

㻼㼍㼚㼑㼘㻌㼠㼔㼕㼏㼗㼚㼑㼟㼟㻌㻦㻌㼠㻩㻟㻚㻡㼙㼙㻌㼙㼍㼤㻚 RE23NS 㻹㻥㻌㼃㼍㼟㼔㼑㼞 RE23NF (front mount) 㻼㼃㻮㻌㼠㼔㼕㼏㼗㼚㼑㼟㼟㻌㻦㻌㼠㻩㻞㻚㻜㼙㼙㻌㼙㼍㼤㻚 㻹㻥㻌㼀㼛㼛㼠㼔㼑㼐㻌㼘㼛㼏㼗㻌㼣㼍㼟㼔㼑㼞 㻹㻥㻌㼃㼍㼟㼔㼑㼞 㻹㻥㻌㻺㼡㼠 㻹㻥㻌㼀㼛㼛㼠㼔㼑㼐㻌㼘㼛㼏㼗㻌㼣㼍㼟㼔㼑㼞 㻹㻥䠄㻼㻩㻜㻚㻣㻡䠅 㻹㻥㻌㻺㼡㼠 㻹㻥䠄㻼㻩㻜㻚㻣㻡䠅 㻥㻚 㻡 㻥㻚 㻡 㻌㻜 㻙㻜㻚㻝 㻌㻜 㻙㻜㻚 㻝 䃥㻢 䃥㻢 㻞㻡㻚 㻡 㻞㻡㻚 㻡 㻝㻝㻚 㻣 㻝㻝㻚 㻣

䠒䠍䠑䠐䠏䠎 㻢㻙䃥㻞 㻤 㻝㻡 㻝㻢㼛㼞㻞㻜 㻤㻚㻥 䠒䠍䠑 䠐䠏䠎 㼀㼑㼞㼙㼕㼚㼍㼘㻌㼚㼡㼙㼎㼑㼞 㻝㻤㻚㻤 㻢㻙䃥㻝 㻝㻡 㻢㻙䕕㻜㻚㻢㻠 㻞㻚㻣 㼀㼑㼞㼙㼕㼚㼍㼘㻌㼚㼡㼙㼎㼑㼞 㻝㻤㻚㻤 㻟㻚㻟 㻤 㻥㻚㻠 㻝㻢㼛㼞㻞㻜

㻼㼍㼚㼑㼘㻌㼠㼔㼕㼏㼗㼚㼑㼟㼟㻌㻦㻌㼠㻩㻟㻚㻡㼙㼙㻌㼙㼍㼤㻚 RE23NC (with wire) 㻹㻥㻌㼃㼍㼟㼔㼑㼞 RE23NV (vertical mount) 㻹㻥㻌㼃㼍㼟㼔㼑㼞 㻼㼍㼚㼑㼘㻌㼠㼔㼕㼏㼗㼚㼑㼟㼟㻌㻦㻌㼠㻩㻟㻚㻡㼙㼙㻌㼙㼍㼤㻚 㻹㻥㻌㼀㼛㼛㼠㼔㼑㼐㻌㼘㼛㼏㼗㻌㼣㼍㼟㼔㼑㼞 㻹㻥㻌㼀㼛㼛㼠㼔㼑㼐㻌㼘㼛㼏㼗㻌㼣㼍㼟㼔㼑㼞 㻹㻥㻌㻺㼡㼠 㻹㻥㻌㻺㼡㼠 㻹㻥䠄㻼㻩㻜㻚㻣㻡䠅 㻹㻥䠄㻼㻩㻜㻚㻣㻡䠅 㻼㼃㻮㻌㼠㼔㼕㼏㼗㼚㼑㼟㼟㻌㻦㻌㼠㻩㻞㻚㻜㼙㼙㻌㼙㼍㼤㻚 㻥㻚 㻡 㻥㻚 㻡 㻌㻜 㻙㻜㻚㻝 㻌㻜 㻙㻜㻚 㻝 䃥㻢 䃥㻢 㻞㻡㻚 㻡 㻞㻡㻚 㻡 㻝㻡㻜㼙㼍㼤 㻚 㻝㻝㻚 㻣 㻝㻝㻚 㻣

䠒䠍䠑 䠐䠏䠎 㻤 䠒䠍䠑䠐䠏䠎 㻝㻡 㻝㻢㼛㼞㻞㻜 㻤㻚㻥 㻝㻡 㻤 㻤㻚㻥 㼀㼑㼞㼙㼕㼚㼍㼘㻌㼚㼡㼙㼎㼑㼞 㻝㻤㻚㻤 㻝㻤㻚㻤 㻝㻢㼛㼞㻞㻜 㻥㻚㻤 㻞㻚㻣

Circuitry

RE23 5V RE23 3.3V Terminal number 㻝㻚㻗㼂 㻝㻚㻗㼂 䠍 䠏䠊䠏䠲䠋䠑䠲 㻿㼡㼜㼜㼘㼥 Mounting hole dimensions (mm) 䠎 䠝 㻿㼕㼓㼚㼍㼘㻌㻭 䃥㻥㻚㻞 㻞㻚㻭 㻞㻚㻭 䠏 䠞 㻿㼕㼓㼚㼍㼘㻌㻮 㻤㻚 㻞 䠐 䠌䠲 㻳㼞㼛㼡㼚㼐 㻟㻚㻮 㻟㻚㻮 䠑 䠯 㻼㼡㼟㼔㻌㻿㼣㼕㼠㼏㼔 䠒 䠯 㻼㼡㼟㼔㻌㻿㼣㼕㼠㼏㼔 㻠㻚㻜㼂 㻠㻚㻜㼂 㻡㻚㻿 㻡㻚㻿

㻢㻚㻿 㻢㻚㻿 PWB mounting hole dimensions (mm)

㻝㻜㻙䃥㻝 㻝㻜㻙䃥㻝

Precautions 㻤㻚 㻢 㻢

Use buffering amplifier when extending 䃥㻥㻚㻞

Wiring 㻝㻝 㻝㻠 㻝㻠

lead wire over 30cm. 㻝㻟㻚 㻢 Do not put a load on the terminal area 䠯䠯䠌䠲 䠞䠝䠑䠲 䠑䠲 䠝 䠞 䠌䠲 䠯 䠯 Soldering during and immediately after soldering. 㻞㻚㻡㽢㻡 㻞㻚㻡㽢㻡 㻝㻤㻚㻢 㻝㻤㻚㻢 Do not use flow/reflow soldering Operation machines. RE23NF RE23NV Use under specified power voltage and Power connect properly. Warranty Do not fasten tighter with the torque of Waterproofing ● 1 year from the date of shipment. more than 1.5N・m. 09.12 TOKYO SOKUTEIKIZAI CO., LTD.

Manual Pulse Generator Catalogue

RE45TP.29 thin (8.5㎜), hermetically sealed

RE45BP.31 long life, various options

RE46 P.33 large wheel, yet thin

RE47 P.35 most compact and thin

Manual Pulse Generator RE45T series Outline RE45T/V series are compact optical manual pulse generators that allow accurate and smooth manual motion for NC machine tools, industrial machines etc. Features ● Eco friendly: RoHS compliant ● Various Options -terminal block mounted type/direct moulding type -output circuit: CMOS, open collector, line driver ● Enclosed structure design ● Protection from flux ● 100PPR, 25PPR available ● Long life use

Specifications

RE645T***5 RE45T***1 RE45T***D RE45***T2 Model RE45V***5 Application 5V input 12V input Differential line Photo coupler Power Voltage DC5V±10% DC12V±10% DC5V±10% DC10.8Vto 26.4V Current Power ≦ 80mA ≦ 60mA ≦ 150mA (90mAtyp) ≦ 60mA Current Power ≦ 30mA ≦ 40mA (Open collector) CMOS (45T) 2.2KΩpull-up Open collector Out put 330Ωpull-up RS-422A or open collector (Current out put type) or open collector (Line driver) Receiver's terminator : 100Ω for each Out put voltage level 1: (Power voltage –0.5V) ≦ level 1: TR is ON signal Out put voltage (Pull up) level 0: ≦ 0.4V (No-load) level 0: TR is OFF Collector voltage not more than DC30V or not more than DC30V or 50mA (Open collector) 50mA Pulse per revolution 100pulse/100Click or 25Pulse/100Click S: (Soft torque) 8 ~ 16mN.m Click torque C: (Standard) 32 ~ 64mN.m Rotational Durability Over a million times 2m water resistant (2h) Protection against water (Do not push or rotate under the water) -10℃ 60℃ Operating Temperature ~ 14F 140F

Part number designation Models Supply Out-put Pulse Per Revolution RE45T1_M5 5V 5V 100PPR Standard Model for 5V RE45T 1 C M 1 B 1 RE45T1_R1 12V 12V 100PPR Standard Model for 12V ① ② ③ ④ ⑤ ⑥ RE45T1_O5 5V OC 100PPR RE45T1_O1 12V OC 100PPR ① Number of pulses ③ Output ⑤ Dial Knob RE45T1_O2 24V OC* 100PPR 12V ~ 24V input, photo coupler only 1: 100PPR M: CMOS B: 15mm, with Tosoku logo RE45T1_D5 5V Differential Line* 100PPR Special model for noise resistance 2: 25PPR O: Open Collector C: 15mm, without logo RE45T2_M5 5V 5V 25PPR D: Line Driver D: 15mm, with customer logo RE45T2_M1 12V 5V* 25PPR 12V input, 5Voutput ② Click R: Pull up H: 25mm with Tosoku logo C: Standard J: 25mm without logo RE45T2_O1 12V OC 25PPR S: Soft ④ Supply Voltage K: 25mm, with customer logo RE45T2_O2 24V OC* 25PPR 12V ~ 24V input, photo coupler only Blank: without click 1: 12V RE45T2_D5 5V Differential Line* 25PPR Special model for noise resistance 2: 24V ⑥ Dial base / Shaft length *Differential Line: Connect with terminating resistance 100Ω(Based on RS-422 line receiver). 5: 5V Blank: W/O dial base,16mm *5V: power voltage = 12V. Output voltage = 5V 0: W/O dial base, 18mm *OC( For photo coupler): Out put voltage/0level=transistor /OFF=Current/0 1: With dial base, 18mm Dimensions (mm)

㻻㼚㻌㼠㼑㼞㼙㼕㼚㼍㼘㻌㼎㼘㼛㼏㼗 䠄㻸㼕㼚㼑㻌㼐㼞㼕㼢㼑㼞㻕

䠩䠕䠄䠬䠙䠌䠊䠓䠑䠅

㻞㻥 䃥䠑䠊䠕

䃥㻢 䠮䠡䠐䠑䠰 䠮䠡䠐䠑䠰 㻔㻢㻟㻕 㻝㻥

㻟㻠 䠇䠲 䠞 䠝 䠌䠲 䠇䠑䠲 䠞 䠞 䠝 䠝 䠌䠲

㻞 㻝㻚㻢 㻢 㻟 㻸 㻝㻜㻚㻝 㻟㻤㻚㻤 㻠㻙㻹㻟㻌㼟㼏㼞㼑㼣 㻢㻙㻹㻟㻌㼟㼏㼞㼑㼣 㻠㻢 䠨䠙䠍䠒㻌㼛㼞㻌䠍䠔

䕔Dial 䕔Dial base 䕔Dial attached on the dial base 㻼㼍㼚㼑㼘㻌㻨㻞 㻤 㻟㻚㻡 㻾㻟㻢㻚㻡 㻰㼕㼍㼘㻌㼎㼍㼟㼑 㻡㻚㻡 㻝㻚㻡 㻰㼕㼍㼘 䠌 䠌 䠕䠌 䠍䠌 䠕䠌 䠩䠐䚷㻿㼏㼞㼑㼣 䃥㻥 䠍䠌 䠩䠐㻌㻿㼏㼞㼑㼣

䠔䠌 䠔䠌

䠎䠌 䠎䠌

䠓䠌 䠓䠌

䠏䠌 䠏䠌

䠒䠌

䠒䠌 䠌 䠐

䠐䠌

䠑䠌 䠑䠌

䃥㻠㻤 㻞㻠 㻥㻚㻡 䠎䠐 㼛㼞 䃥㻢㻜㻚㻤 䃥㻠㻤 㼛㼞 㻝㻠㻚㻢 䃥㻢㻜 㻝㻡 㻝㻢㻚㻣 䃥㻢㻢 䃥㻢㻢 㻝㻡 㻞㻝㻚㻤

䕔Mounting hole dimensions (mm)

䃥㻥㻚㻞 Precautions

Soldering Temperature Time Manual 㻝㻥 Up to 350° Within 3 seconds for each terminal Soldering Flow soldering Up to 260° Within 5 seconds for each terminal 䃥㻟㻚㻟㻰㼑㼜㼠㼔㻝㻚㻤 NOTE: Do not put pressure on terminal during heating or soon after.

䕔Circuitry 䖃CMOS (M) 䖃Open Collector (O) 䖃Pull up (R) 䖃Line driver (D) 䠇䠲 䠇䠲 䠇䠲 䠇䠲

䠝䠋䠞 䠝䠋䠞 䠝䠋䠞 䠝䠋䠞 䠝䠋䠞 䠰䠟䠐䠌䠑䠌 䠎䠒䠟䠏䠍 䠌䠲 䠌䠲 䠌䠲 䠌䠲

䕔 㻯㼘㼛㼏㼗㼣㼕㼟㼑 㻯㼛㼡㼚㼠㼑㼞㼏㼘㼛㼏㼗㼣㼕㼟㼑 Output Waveform 㻝 㻿㼕㼓㼚㼍㼘㻌㻭 1) Turning the shaft clockwise would generate the signal A when the 㻜 signal B outputs a low voltage (0); 㻝 㻿㼕㼓㼚㼍㼘㻌㻮 2) Rotating the shaft counter-clockwise would generate the signal A when 㻜 the signal B outputs a high voltage(1); 㻞㻡㻼㻼㻾㻌㻰㼑㼠㼑㼚㼠㻌㻼㼛㼟㼕㼠㼕㼛㼚㼟

㻝㻜㻜㻼㻼㻾㻌㻰㼑㼠㼑㼚㼠㻌㻼㼛㼟㼕㼠㼕㼛㼚㼟 Manual Pulse Generator

RE45B series

Outline RE45B series are optical manual pulse generator developed for NC machine tools Features

● Eco friendly: RoHS compliant ● Comfortable wide knob ● Various Options ● Printing Logo type on the wheel cover upon request ● Long life use

Specifications

Application 5V input 2V input Differential line Photo coupler Power Voltage DC5V±10% DC12V±10% DC5V±10% DC10.8V to 26.4V Current power (pull up) ≦ 80mA ≦ 60mA ≦ 150mA (90mAtyp) ≦ 60mA Current power(Open collector) ≦ 30mA ≦ 40mA Open collector Output 330ΩPull-up or Open collector 2.2KΩPull-up or Open collector RS-422A (Line driver) (Current output type) Terminating register at receiver Output voltage 1 level:(Power voltage –0.5V) ≦ 1level:Transistor/ON :100Ω/phrase Output voltage (pull up) 0 level: ≦ 0.4V (No-load) 0level:Transistor/OFF Collector voltage ≦ DC30V ≦ 30V Collector voltage (Open corrector) ≦ 40mA ≦ 50mA Pulse per revolution 100pulse/100Click or 25pulse/100Click A,B,C : 8 ~ 16mN.m Click torque D: 32 ~ 64mN.m Rotational Durability Over a million rotations D type only: 2m water resistant (2h) Water resistance (Do not push or rotate under the water) -10℃ 60℃ Operating Temperature ~ 14F 140F

Part number designation

RE45B A 1 R 5 B Models Supply Pulse Per Revolution ① ② ③ ④ ⑤ RE45B_1R5 5V 5V 100PPR RE45B_1R1 12V 12V 100PPR Type ① RE45B_1O5 5V OC 100PPR A: With φ 80 dial / mounted by 3 nuts ④ Supply Voltage RE45B_1O1 12V OC 100PPR C: With φ 66 dial / mounted by 1 nut 5: 5V RE45B_1O2 24V OC* 100PPR D: Without Dial 1: 12V RE45B_1D5 5V Differential Line* 100PPR 2: 24V RE45B_2R5 5V 5V 25PPR ② Number of pulses RE45B_2R1 12V 5V* 25PPR RE45B_2O5 12V OC 25PPR 1: 100PPR ⑤ Dial Knob (color:black) RE45B_2O1 12V OC 25PPR 2: 25PPR B: 15mm, with Tosoku logo RE45B_2O2 24V OC* 25PPR C: 15mm, without logo RE45B_2D5 5V Differential Line* 100PPR Output ③ D: 15mm, with customer logo *Differential Line: Connect with terminating resistance 100Ω(Based on R: Voltage Output H: 24mm with Tosoku logo RS-422 line receiver). O: Open Collector J: 24mm without logo *5V:Supple voltage=12V, Output voltage=5V D: Line Driver K: 24mm, with customer logo *OC:For photo coupler only, Supply voltage 12 〜 24V Dimensions (mm)

䖃Type A (with 80 dial / mounted by 3 nuts) 䕔Type A, Mounting hole dimensions (mm)

㻼㼍㼚㼑㼘㻌㼠㼔㼕㼏㼗㼚㼑㼟㼟㻌㻦㻌㼠㻩㻟㻌㼙㼍㼤㻚 䠰䡁䡎䡉䡅䡊䠽䡈䚷䠞䡈䡋䠿䡇䚷䡓䡅䡐䡄䚷䠟䡋䡒䡁䡎 䠏䠉䠩䠐䚷䠯䡐䡑䡀䡏䚷䠨䠙䠔 䠬䠊䠟䠊䠠䚷䠓䠎 䠏䠉䃥䠐䠊䠑䡄䡋䡈䡁䡏 䃥㻣㻞 䃥㻢㻞㼼㻜㻚㻡 䠌 㼻 䠕䠌 䠍䠌 㻜 㻞 㻝 㻠㻝㻚 㻡 䠔䠌 䠇䠑䠲㻻㼂䠝 䠞

䠎䠌

䠓䠌 䠏䠌 䠮䠡䠐䠑䠞 䠩䠝䠪䠱䠝䠨䚷䠬䠱䠨䠯䠡䚷䠣䠡䠪䠡䠮䠝䠰䠫䠮

䠰䠵䠬䠡 䠮䠡䠐䠑䠞䠝䠍䠮䠑

䠒䠌 䠨䠫䠰䚷䠪䡋䠊

䠐䠌 䠰䠫䠧䠵䠫䚷䠯䠫䠧䠱䠰䠡䠥䠧䠥䠶䠝䠥䚷䠟䡋䠊䠈䠨䠰䠠䠊

䠠䠟䠑䠲㼼䠍䠌䠂䚷䠔䠌䡉䠝䡉䠽䡔 䠦䠝䠬䠝䠪 䠑䠌

㻝 㻞 㻜 㼻 䃥㻡㻟 䠬䠽䠿䡇䡅䡊䡃䚷 䃥㻢㻜㼼㻜㻚㻡 㻞㻠 䃥㻣㻞 㼛㼞 㻞㻤㻚㻡 䃥㻤㻜㼼㻝 㻝㻡 㻞㻡㻚㻠 㻟㻤

䖃Type C (with 66 dial / mounted by 1 nut) 䕔Type C,D, Mounting Hole Dimension (mm)

㻼㼍㼚㼑㼘㻌㼠㼔㼕㼏㼗㼚㼑㼟㼟㻌㻦㻌㼠㻩㻝㻚㻡ࠥ㻞㻚㻜 䠰䡁䡎䡉䡅䡊䠽䡈䚷䠞䡈䡋䠿䡇䚷䡓䡅䡐䡄䚷䠟䡋䡒䡁䡎 䃥㻟㻚㻟㻌㻰㼑㼜㼠㼔㻌㻝㻚㻤 䃥㻢㻜㼼㻜㻚㻡 㻥㻚㻞

䠌 䠕䠌 䠍䠌 㻟㻢㻚 㻡 䠔 䠌 䠇䠑䠲䠌䠲䠝 䠞 䠌 䠎 㻞㻡㻚 㻡

㻝㻥㼼㻜㻚 㻝 䠓䠌

䠏䠌 䠮䠡䠐䠑䠞 䠩䠝䠪䠱䠝䠨䚷䠬䠱䠨䠯䠡䚷䠣䠡䠪䠡䠮䠝䠰䠫䠮

䠰䠵䠬䠡

䠮䠡䠐䠑䠞䠟䠍䠮䠑 㻟㻜 䠒䠌

䠐 䠨䠫䠰䚷䠪䡋䠊 䠑䠌 䠰䠫䠧䠵䠫䚷䠯䠫䠧䠱䠰䠡䠥䠧䠥䠶䠝䠥䚷䠟䡋䠊䠈䠨䠰䠠䠊 䠠䠟䠑䠲㼼䠍䠌䠂䚷䠔䠌䡉䠝䡉䠽䡔 䠦䠝䠬䠝䠪

䃥㻠㻤 㻡㻝 㻞㻠 䃥㻢㻜 㼛㼞 㻝㻢㻚㻡 䃥㻢㻢㼼㻝 㻝㻡 㻞㻝㻚㻤 㻞㻢

䖃Type D (without dial)

㻼㼍㼚㼑㼘㻌㼠㼔㼕㼏㼗㼚㼑㼟㼟㻌㻦㻌㼠㻩㻟㻌㼙㼍㼤㻚 䠰䡁䡎䡉䡅䡊䠽䡈䚷䠞䡈䡋䠿䡇䚷䡓䡅䡐䡄䚷䠟䡋䡒䡁䡎 㻟 㻝㻚㻢 䃥㻢㻜㼼㻜㻚㻡 䠩䠕䚷䠬䠌䠊䠓䠑 䃥㻡㻚㻥 㻞㻡㻚 㻡 㻝㻥

䠩䠝䠪䠱䠝䠨䚷䠬䠱䠨䠯䠡䚷䠣䠡䠪䠡䠮䠝䠰䠫䠮 䠰䠵䠬䠡 䠮䠡䠐䠑䠞䠠䠍䠮䠑 㻟㻜 䃥㻢 䠨䠫䠰䚷䠪䡋䠊 䠰䠫䠧䠵䠫䚷䠯䠫䠧䠱䠰䠡䠥䠧䠥䠶䠝䠥䚷䠟䡋䠊䠈䠨䠰䠠䠊 䠠䠟䠑䠲㼼䠍䠌䠂䚷䠔䠌䡉䠝䡉䠽䡔 䠦䠝䠬䠝䠪 㻣 㻝㻢㻚㻡 㻝㻢 㻞㻢 㻡㻝

䕔Circuitry 䖃Open collector (code:O) 䖃Votage Output (code:R) 䖃Line Driver (code:D) 䠇䠲 䠇䠲 䠇䠲

䠝䠋䠞 䠝䠋䠞 䠝䠋䠞 䠝䠋䠞 䠎䠒䠟䠏䠍 䠌䠲 䠌䠲 䠌䠲

䕔 㻯㼘㼛㼏㼗㼣㼕㼟㼑 㻯㼛㼡㼚㼠㼑㼞㼏㼘㼛㼏㼗㼣㼕㼟㼑 Output Waveform 㻝 㻿㼕㼓㼚㼍㼘㻌㻭 1) Turning the shaft clockwise would generate the signal A when the 㻜 signal B outputs a low voltage (0); 㻝 㻿㼕㼓㼚㼍㼘㻌㻮 2) Rotating the shaft counter-clockwise would generate the signal A when 㻜 the signal B outputs a high voltage(1); 㻞㻡㻼㻼㻾㻌㻰㼑㼠㼑㼚㼠㻌㻼㼛㼟㼕㼠㼕㼛㼚㼟

㻝㻜㻜㻼㻼㻾㻌㻰㼑㼠㼑㼚㼠㻌㻼㼛㼟㼕㼠㼕㼛㼚㼟 Manual Pulse Generator RE46 series

Outline RE46 series are incremental optical manual pulse generators developed for NC machine tools. The depth of the surface-bottom is mere 8mm which allows you to save space behind the panel.

Features

● Eco friendly: RoHS compliant

● Fine operability with a large wheel and a weight inside

● Various Options of the input/output circuit: CMOS, open collector, line driver

● Chattering-free and long-life use with optical unit

● Original logos available on the wheel cover

Specifications

Application 5V input 12V input Differential line Photo coupler(12 ~ 24V) Power Voltage DC5V±10% DC12V±10% DC5V±10% DC10.8V to 26.4V Current power (pull up) ≦ 80mA ≦ 60mA ≦ 150mA (90mAtyp) ≦ 60mA Current power(Open collector) ≦ 30mA ≦ 40mA Open collector Output 330ΩPull-up or Open collector 2.2KΩPull-up or Open collector RS-422A (Line driver) (Current output type) Terminating register at receiver Output voltage 1 level:(Power voltage –0.5V) ≦ :100Ω/phrase 1level:Transistor/ON (pull up) 0 level: ≦ 0.4V (No-load) 0level:Transistor/OFF Collector voltage ≦ DC30V ≦ 30V (Open corrector) ≦ 50mA ≦ 50mA Pulse per revolution 100pulse/100Click or 25pulse/100Click Click torque 32 ~ 64mN.m (320 ~ 640gf.cm) Rotational Durability Over a million rotations -10℃~ 60℃ Operating Temperature (14F ~ 140F) Weight 220g

Part number designation Models Supply Pulse Per Revolution RE46 A 1 C R 5 B RE46A1CR5_ 5V 5V 100PPR ① ② ③ ④ ⑤ ⑥ RE46A1CR1_ 12V 12V 100PPR RE46A1CO5_ 5V OC 100PPR ① Type ⑤ Supply Voltage RE46A1CO1_ 12V OC 100PPR 5: 5V RE46A1CO2_ 24V OC* 100PPR ② Number of Pulses 1: 12V RE46A1CD5_ 5V Differential Line* 100PPR 1: 100PPR 2: 12 〜 24V RE46A2CR5_ 5V 5V 25PPR 2: 25PPR RE46A2CR1_ 12V 5V* 25PPR ⑥ Dial Knob (color black) RE46A2CO5_ 5V OC 25PPR ③ Click B: 15mm with Tosoku logo RE46A2CO1_ 12V OC 25PPR C: Standard C: 15mm without logo RE46A2CO2_ 24V OC* 25PPR D: 15mm customer logo RE46A2CD5_ 5V Differential Line* 25PPR ④ Output H: 24mm with Tosoku logo *Differential Line: Connect with terminating resistance 100Ω(Based on R: Voltage Output J: 24mm without logo RS-422 line receiver). O: Open Collector K: with customer logo *5V:Supply voltage=12V, Output voltage=5V D: Line Driver *OC:For photo coupler only, Supply voltage 12 〜 24V Dimensions (mm)

䠆㻸㼕㼚㼑㻌㻰㼞㼕㼢㼑㼞㻌㼕㼟㻌㼕㼚㻌㼠㼔㼑㻌㼐㼞㼍㼣㼕㼚㼓㻌㼎㼑㼘㼛㼣 㻟㻙㻹㻠

䠩䠝䠪䠱䠝䠨䚷䠬䠱䠨䠯䠡䚷䠣䠡䠪䠡䠮䠝䠰䠫䠮 䠰䠵䠬䠡 䠮䠡䠐䠒䠝䠍䠟䠮䠑

㻾㻠㻝㻚 㻡 䠨䠫䠰䚷䠪䡋䠊 䠰䠫䠧䠵䠫䚷䠯䠫䠧䠱䠰䠡䠥䠧䠥䠶䠝䠥䚷䠟䡋䠊䠈䠨䠰䠠䠊 䠠䠟䠑䠲㼼䠍䠌䠂䠔䠌䡉䠝䡉䠽䡔 䠦䠝䠬䠝䠪 䃥㻢㻜

䠇䠲 䠌䠲 䠝䠞

㻞㻠 㻠㻙㻹㻟 㼛㼞 㻼㼍㼏㼗㼕㼚㼓 㻭㼏㼏㼑㼟㼟㼛㼞㼕㼑㼟 䃥㻢㻝㻚㻞 㻝㻡 㻔㻞㻢㻕 㻤 㻹㻠㻌㻺㼡㼠㻌㻦㻌㼠㻟㻚㻞㼙㼙 䃥㻤㻜 㻹㻠㻌㼀㼑㼑㼠㼔㻌㼃㼍㼟㼔㼑㼞㻌㻦㻌㼠㻩㻜㻚㻥㼙㼙 㻹㻠㻌㼃㼍㼟㼔㼑㼞㻌㻦㻌㼠㻩㻜㻚㻤㼙㼙

Panel Mounting Hole 㻟㻙䃥㻠㻚㻡 䃥㻣㻞㼼㻜㻚㻝 㻝 䃥㻢㻞㼼㻜㻚㻡 㻞 㻜 㻸㼕㼚㼑㻌㻰㼞㼕㼢㼑㼞㻌㻔㻌㻢㻌㼠㼑㼞㼙㼕㼚㼍㼘㼟㻌㻕 㼻

䠩䠝䠪䠱䠝䠨䚷䠬䠱䠨䠯䠡䚷䠣䠡䠪䠡䠮䠝䠰䠫䠮 䠰䠵䠬䠡 䠮䠡䠐䠒䠝䠍䠟䠠䠑 䠨䠫䠰䚷䠪䡋䠊 䠰䠫䠧䠵䠫䚷䠯䠫䠧䠱䠰䠡䠥䠧䠥䠶䠝䠥䚷䠟䡋䠊䠈䠨䠰䠠䠊 䠠䠟䠑䠲㼼䠍䠌䠂䠍䠑䠌䡉䠝䡉䠽䡔䠦䠝䠬䠝䠪

㻝 㻞 㻜 㼻 䠇䠲 䠌䠲 䠝 䠝 䠞 䠞

㼀㼔㼕㼏㼗㼚㼑㼟㼟㻌㼛㼒㻌㼠㼔㼑㻌㻼㼍㼚㼑㼘㻌㻦㻌䍺䚷㻟㻌㼙㼙 㻢㻙㻹㻟 㻾㼑㼏㼛㼙㼙㼑㼚㼐㼑㼐㻌㼀㼛㼞㼝㼡㼑㻌㼒㼛㼞㻌㼒㼍㼟㼠㼑㼚㼕㼚㼓㻌㼠㼔㼑㻌㼚㼡㼠 㻌㻦㻌㻜㻚㻠㻌ࠥ㻌㻜㻚㻡㻌㻺䞉㼙㻌㻔㻠ࠥ㻡㻌㻷㼓㼒䞉䠿㼙㻕

䕔Circuitry 䖃Open collector (code:O) 䖃Votage Output (code:R) 䖃Line Driver (code:D) 䠇䠲 䠇䠲 䠇䠲

䠝䠋䠞 䠝䠋䠞 䠝䠋䠞 䠝䠋䠞 䠎䠒䠟䠏䠍 䠌䠲 䠌䠲 䠌䠲

䕔 㻯㼘㼛㼏㼗㼣㼕㼟㼑 㻯㼛㼡㼚㼠㼑㼞㼏㼘㼛㼏㼗㼣㼕㼟㼑 Output Waveform 㻝 㻿㼕㼓㼚㼍㼘㻌㻭 1) Turning the shaft clockwise would generate the signal A when the 㻜 signal B outputs a low voltage (0); 㻝 㻿㼕㼓㼚㼍㼘㻌㻮 2) Rotating the shaft counter-clockwise would generate the signal A when 㻜 the signal B outputs a high voltage(1); 㻞㻡㻼㻼㻾㻌㻰㼑㼠㼑㼚㼠㻌㻼㼛㼟㼕㼠㼕㼛㼚㼟

㻝㻜㻜㻼㻼㻾㻌㻰㼑㼠㼑㼚㼠㻌㻼㼛㼟㼕㼠㼕㼛㼚㼟 Manual Pulse Generator RE47 series Outline RE47 is an incremental optical manual pulse generator developed mainly for NC machine tools. The series are most compact of all MPGs on our line-up and universally compatible with various sorts of compact MPGs.

Features

● Eco friendly: RoHS compliant ● φ 60mm diameter ● Less than 10mm in depth (from surface-to-bottom) allows you to save space behind the panel ● Fine operability with a weight inside of the dial. ● Various Options of the input/output circuit: CMOS, open collector, line driver ● Chattering-free and long-life use with optical unit ● Original logos available on the dial

Specifications

Application 5V input 12V input Differential line Photo coupler(12 ~ 24V) Power Voltage DC5V±10% DC12V±10% DC5V±10% DC10.8V to 26.4V Current power (pull up) ≦ 80mA ≦ 60mA ≦ 150mA (90mAtyp) ≦ 60mA Current power(Open collector) ≦ 30mA ≦ 40mA Open collector Output 330ΩPull-up or Open collector 2.2KΩPull-up or Open collector RS-422A (Line driver) (Current output type) Terminating register at receiver Output voltage 1 level:(Power voltage –0.5V) ≦ :100Ω/phrase 1level:Transistor/ON (pull up) 0 level: ≦ 0.4V (No-load) 0level:Transistor/OFF Collector voltage ≦ DC30V ≦ 30V (Open corrector) ≦ 50mA ≦ 50mA Pulse per revolution 100pulse/100Click or 25pulse/100Click Panel water resistance IP54 Click torque 8 ~ 16mN.m (80 ~ 160gf.cm) Rotational Durability Over a million rotations -10℃~ 60℃ Operating Temperature (14F ~ 140F) Weight 85g Part number designation Models Supply Pulse Per Revolution RE47 A 1 S R 5 B RE47A1SR5_ 5V 5V 100PPR ① ② ③ ④ ⑤ ⑥ RE47A1SR1_ 12V 12V 100PPR RE47A1SO5_ 5V OC 100PPR ① Type ⑤ Supply Voltage RE47A1SO1_ 12V OC 100PPR 5: 5V RE47A1SO2_ 24V OC* 100PPR ② Number of Pulses 1: 12V RE47A1SD5_ 5V Differential Line* 100PPR 1: 100PPR 2: 12 〜 24V RE47A1SR5_ 5V 5V 25PPR 2: 25PPR RE47A1SR1_ 12V 5V* 25PPR ⑥ Dial Knob (color black) RE47A1SO5_ 5V OC 25PPR ③ Click B: 15mm with Tosoku logo RE47A1SO1_ 12V OC 25PPR S: Soft C: 15mm without logo RE47A1SO2_ 24V OC* 25PPR D: 15mm customer logo RE47A1SD5_ 5V Differential Line* 25PPR ④ Output *Differential Line: Connect with terminating resistance 100Ω(Based on R: Voltage Output RS-422 line receiver). O: Open Collector *5V:Supply voltage=12V, Output voltage=5V D: Line Driver *OC:For photo coupler only, Supply voltage 12 〜 24V Dimensions (mm) 䠆㻸㼕㼚㼑㻌㻰㼞㼕㼢㼑㼞㻌㼕㼟㻌㼕㼚㻌㼠㼔㼑㻌㼐㼞㼍㼣㼕㼚㼓㻌㼎㼑㼘㼛㼣 㻭㼏㼏㼑㼟㼟㼛㼞㼕㼑㼟 㻟㻙㻹㻟

䠩䠝䠪䠱䠝䠨䚷䠬䠱䠨䠯䠡䚷䠣䠡䠪䠡䠮䠝䠰䠫䠮 䠰䠵䠬䠡 䠮䠡䠐䠓䠝䠍䠯䠮䠑 䠨䠫䠰䚷䠪䡋䠊䠎䠏䠑 䠰䠫䠧䠵䠫䚷䠯䠫䠧䠱䠰䠡䠥䠧䠥䠶䠝䠥䚷䠟䡋䠊䠈䠨䠰䠠䠊 㼼䠲䠑䡉䠝䡉䠽䡔䠔䠌䠂䠍䠌䠠䠟 䠦䠝䠬䠝䠪 䠇䠑䠲䠌䠲 䠝䠞 䃥㻠㻡

㻠㻙㻹㻟 㻼㼍㼏㼗㼕㼚㼓 㻔㻝㻡㻕 㻔㻞㻡㻕 㻔㻝㻜㻕 䠄㻟㻣䠅 㻢㻚㻞 㻭㼏㼏㼑㼟㼟㼛㼞㼕㼑㼟 䃥㻠㻡 㻹㻟㻌㻺㼡㼠㻌㻦㻌㼠㻞㻚㻠㼙㼙 㻣㻚㻢㻞 䃥㻢㻜㻚㻢 㻹㻟㻌㼀㼑㼑㼠㼔㻌㼃㼍㼟㼔㼑㼞㻌㻦㻌㼠㻩㻜㻚㻣㼙㼙 㻹㻟㻌㼃㼍㼟㼔㼑㼞㻌㻦㻌㼠㻩㻜㻚㻡㼙㼙

Panel Mounting Hole 㻟㻙䃥㻟㻚㻢 䃥㻡㻟㼼㻜㻚㻞

䃥㻠㻢㼼㻜㻚㻡 㻝 㻸㼕㼚㼑㻌㻰㼞㼕㼢㼑㼞㻌㻔㻌㻢㻌㼠㼑㼞㼙㼕㼚㼍㼘㼟㻌㻕 㻞 㻜 㼻

䠨䠫䠰䚷䠪䡋䠊䠎䠓䠑 㼈㻹㻗㻝㻲㻜㻠㻭㼈㻹㻗㻝㻲㻜㻠㻮㼈㻹㻗㻝㻲㻜㻠㻯㼈㻹㻗㻝㻲㻜㻠㻰㼈㻹㻗㻝㻲㻜㻠㻱 䠦䠝䠬䠝䠪 㼈㻹㻗㻝㻲㻜㻡㻜㼈㻹㻗㻝㻲㻜㻡㻝䠮䠡䠐䠓䠝䠍䠯䠠䠑 䠇䠑䠲䠌䠲䠝 䠞

㻝 㻞 㻜 㼻 㼀㼔㼕㼏㼗㼚㼑㼟㼟㻌㼛㼒㻌㼠㼔㼑㻌㻼㼍㼚㼑㼘㻌㻦㻌䍺䚷㻟㻌㼙㼙 㻢㻙㻹㻟 㻾㼑㼏㼛㼙㼙㼑㼚㼐㼑㼐㻌㼀㼛㼞㼝㼡㼑㻌㼒㼛㼞㻌㼒㼍㼟㼠㼑㼚㼕㼚㼓㻌㼠㼔㼑㻌㼚㼡㼠 㻌㻦㻌㻜㻚㻠㻌ࠥ㻌㻜㻚㻡㻌㻺䞉㼙㻌㻔㻠ࠥ㻡㻌㻷㼓㼒䞉㼏㼙㻕

䕔Circuitry 䖃Open collector (code:O) 䖃Votage Output (code:R) 䖃Line Driver (code:D) 䠇䠲 䠇䠲 䠇䠲

䠝䠋䠞 䠝䠋䠞 䠝䠋䠞 䠝䠋䠞 䠎䠒䠟䠏䠍 䠌䠲 䠌䠲 䠌䠲

䕔 㻯㼘㼛㼏㼗㼣㼕㼟㼑 㻯㼛㼡㼚㼠㼑㼞㼏㼘㼛㼏㼗㼣㼕㼟㼑 Output Waveform 㻝 㻿㼕㼓㼚㼍㼘㻌㻭 1) Turning the shaft clockwise would generate the signal A when the 㻜 signal B outputs a low voltage (0); 㻝 㻿㼕㼓㼚㼍㼘㻌㻮 2) Rotating the shaft counter-clockwise would generate the signal A when 㻜 the signal B outputs a high voltage(1); 㻞㻡㻼㻼㻾㻌㻰㼑㼠㼑㼚㼠㻌㻼㼛㼟㼕㼠㼕㼛㼚㼟

㻝㻜㻜㻼㻼㻾㻌㻰㼑㼠㼑㼚㼠㻌㻼㼛㼟㼕㼠㼕㼛㼚㼟 TOKYO SOKUTEIKIZAI CO., LTD.

Handy Manual Pulse Generator Catalogue

HTP.39 thin-line, 3 position enabling switch available

HC1P.43 compact, light

HMP.49 compact, emergency stop button/enabling switch available

HRP.53 3 position enabling switch available

HSP.57 resin box, free-to-design

Metal holders are provided for all Handy MPGs. Magnets are optionally provided. Original company logos can be printed on the dials.

Handy Manual Pulse Generator HT Series

Outline HT series are easy-to-handle and compact Handy MPGs which put a premium on safety with 3-position enabling switches and emergency stop buttons.

Features

● Ergonomically designed and compact to be held with one hand ● 3-position (off-on-off) enabling switch available on either side ● Upper part is free to design and allows various kinds of switches (including emergency stop button) to be set ● RoHS compliant ● On the middle part: either MR8A - the rotary switch series or MR8C - the digital code switch series selectable ● Strong plate magnets available on back side (as option) ● Various types of curl cords provided along with connectors of all sorts at your request

Specifications

1. Body 2.2 Selector Switches Dimension 170×80×39(mm) MR8A (rotary switch) 25V15mA (AC/DC) LED light DC24V Green MR8C (code switch) 15V10mA (AC/DC) * See MR8A/MR8C catalog for more details Enabling switches Available on both sides Logo Logo available on the wheel cover 3. Curl/Straight Cords 19/25-conductor shielded cable 2. Mechanical specifications 19-conductor: select from 2m, 3m, 4m, 5m 2.1 Rotary Encoder Unit 25-conductor: select from 3m, 5m Curl Cord (We will select either 19 or 25-conductor in accordance Output Voltage DC5V±10%, DC12V±10% or 12~24V with required functions) Wheel 100 clicks / rotation For further details, please see the catalogues for curl 100 pulses or 25 pulses per rotation cords Rotational Durability Over 1,000,000 times Straight Also available Output Waveform Cord 1) Turning the shaft clockwise would generate the signal A when the 5. Connector Unit signal B outputs a low voltage (0); 2) Rotating the shaft counter-clockwise would generate the signal A Dripproofed connector to be attached on the end of the when the signal B outputs a high voltage(1); Connector cord optionally provided (EBSP2119-D/EBSP2119FGS-D by DDK) 㻯㼘㼛㼏㼗㼣㼕㼟㼑 㻯㼛㼡㼚㼠㼑㼞㼏㼘㼛㼏㼗㼣㼕㼟㼑 㻝 㻿㼕㼓㼚㼍㼘㻌㻭 㻜 Warranty 㻝 㻿㼕㼓㼚㼍㼘㻌㻮 㻜 ● 1 year from the date of shipment.

㻞㻡㻼㻼㻾㻌㻰㼑㼠㼑㼚㼠㻌㻼㼛㼟㼕㼠㼕㼛㼚㼟

㻝㻜㻜㻼㻼㻾㻌㻰㼑㼠㼑㼚㼠㻌㻼㼛㼟㼕㼠㼕㼛㼚㼟 * See RE45B catalog for more details 㼀㼔㼕㼟㻌㼐㼞㼍㼣㼕㼚㼓㻌㼕㼟㻌㼍㼚㻌㼑㼤㼍㼙㼜㼘㼑㻘㻌㼕㼠㻌㼙㼍㼥㻌㼐㼕㼒㼒㼑㼞㻌㼍㼏㼏㼛㼞㼐㼕㼚㼓㻌㼠㼛㻌㼚㼡㼙㼎㼑㼞㻌㼛㼒㻌㼟㼣㼕㼠㼔㼑㼟㻌㼑㼠㼏㻚 Dimensions (mm) 㻴㼀㻌㼁㼚㼕㼠㻌㼣㼕㼠㼔㻌㼏㼡㼞㼘㻌㼏㼛㼞㼐 㼀㼔㼑㻌㼐㼕㼙㼑㼚㼟㼕㼛㼚㼟㻌㼐㼛㼑㼟㻌㼚㼛㼠㻌㼕㼚㼏㼘㼡㼐㼑㻌㼡㼚㼑㼢㼑㼚㼚㼑㼟㼟㻌㼐㼡㼑㻌㼠㼛㻌㼠㼔㼑㻌㼟㼣㼕㼠㼏㼔㼑㼟㻌㼑㼠㼏㻚 HT Unit with curl cord ※ This drawing is an example, it may differ according to number of swithes etc.

㻟㻥 䠄㻡䠅 㻤㻜

㼃㼕㼠㼔㻌㼣㼍㼠㼑㼞㻙㼜㼞㼛㼛㼒㻌㼏㼛㼚㼚㼑㼏㼠㼛㼞

㻞㻠 㻱㼙㼑㼞㼓㼑㼚㼏㼥㻌㻿㼠㼛㼜㻌㻿㼣㼕㼠㼏㼔 䠡䠞䠯䠬䠎䠍䠍䠕䠩䠣䠉䠠 㻰㻰㻷

㻱㼚㼍㼎㼘㼑㻌㻿㼣㼕㼠㼏㼔 㻸㼍㼎㼑㼘 䠴 䠵 䠶 䠴䠍䠌 䠴䠍䠌䠌 䠫䠢䠢 䠐 䠴䠍 㻹㼍㼓㼚㼕㼒㼕㼏㼍㼠㼕㼛㼚㻌

㻭㼤㼕㼍㼘㻌㻿㼑㼘㼑㼏㼠㼕㼛㼚 㻿㼑㼘㼑㼏㼠㼕㼛㼚 㻝㻜㻜 㻝㻣㻜 㻸㻱㻰 㻿㼏㼍㼘㼑㻌㻼㼘㼍㼠㼑 㻝㻜㻜㻜 㻔㻞㻡㻜㻕 㻸㼛㼓㼛㻌㻹㼍㼞㼗

㻰㼕㼍㼘

㻝㻥㻛㻞㻡㻌 㻔㻝㻡㻜㻕

㻔㻡㻡㻕 㼏㼛㼚㼐㼡㼏㼠㼛㼞㼟

㻸㼑㼚㼓㼠㼔㻌㻔㼍㼟㻌㼞㼑㼒㼑㼞㼑㼚㼏㼑㻕 㻞㻢 㻟㻝 㼒㼛㼞㻌㻞㼙 䠄㻌㻌㻠㻢㻜㼙㼙䠅 㻖 㼒㼛㼞㻌㻟㼙 䠄㻌㻌㻢㻥㻜㼙㼙䠅 㼒㼛㼞㻌㻠㼙 䠄㻌㻌㻥㻞㻜㼙㼙䠅 㻖 㼒㼛㼞㻌㻡㼙 䠄㻝㻜㻤㻜㼙㼙䠅 㻖㻝㻥㻌㼏㼛㼚㼐㼡㼏㼠㼛㼞㼟㻌㼛㼚㼘㼥 㻸

㻹㼍㼠㼑㼞㼕㼍㼘㻌㻦㻌㻿㻼㻯㻯 Original Holder Material : SPCC 㻻㼞㼕㼓㼕㼚㼍㼘㻌㻴㼛㼘㼐㼑㼞 㻯㼍㼠㼔㼛㼐㼕㼏㻌㻱㼘㼑㼏㼠㼞㼛㼐㼑㼜㼛㼟㼕㼠㼕㼛㼚㻌㻯㼛㼍㼠㼕㼚㼓 Cathodic Electrodeposition Coating

㻥㻚㻣 㻝㻤㻥㻚㻟 㻡㻜 㻣㻟㻚㻤 㻴㼛㼘㼑㻌㼒㼛㼞㻌㻟㻙㻹㻠 㻠㻜 㻟㻟 㻢㻜 㻤㻡㻚 㻣 㻟㻝㻚 㻟 㻝㻤㻚 㻝 H T series Order Sheet (Print out this page for sending orders.) WeWe'll'll hand in to you a drawing in accordance with your order. The drawing shall be approved before starting in on production. 1) Select one from each spec table and fill blank spaces with "○". Axis Selector/Multiplication Selector Switches Pulses/Rev. MR8C type(Gray code switch) 100PPR MR8A type(Selection switch) * 25PPR *25PPR25PPR and yetyet 100 Clicks/RevolutionClicks/Revolution Indications for Axis Selector (left) e.g. OFF, X, Y, Z, 4, 5

Power Supply Output 5V 5V(330Ω Pull Up) Indications for Multiplication Selector (right) 5V Open Collector e.g. ×1, ×10, ×100 5V (for Line Driver) 12V 5V(2.2kΩ Pull Up) 12V 12V(2.2kΩ Pull Up) 12V Open Collector 12V- for Photocoupler Curl Cord Length * 24V (Open Collector) 2m Curl Cord (for only 19-conductor cord) * Transistor will be "OFF" at every 3m Curl Cord clicked positions. 4m Curl Cord (for only 19-conductor cord) (For other open collector output 5m Curl Cord momodelsdels, ttransistorsransistors wwillill bbee ""ON"ON" aatt * WeWe wwillill seselectlect eeitherither 19-con conductorductor corcordd or 25- every clicked positions. conductor cord to cover your requested specs Logo on the dial None with "TOSOKU" logo Waterproofed Connector (for curl cord) with an original logo( ) None Male connector (EBSP2119MG-D, DDK) 3-P Positionsositions EnEnablingabling SSwitchwitch (co(contacts)ntacts) Female connector (EBSP2119FGSEBSP2119FGS-D-D,, DDK) None * Fill in both spaces to order both connectors. One on the left( ) On both sides( ) 2) Other options * Assigned contacts should be 2 or Other options to request less for normally open (NO) and 2 or (e.g.) less for normally closed (NC). Switches with LED illumination x 2 (2A2B maximum.) 2 contact selector switch x1 Emergency Switch (contacts) None Mounted ( ) * 1 for (NO), 4 for (NC) maximum (1A/4B). Maximum of 4 contacts in total (1A3B or 4B). Magnet on the backside NoneN Mounted

●Rotary Encoders ●Code Switches ●Pulse Generators ●Lever Switches 12.6 ●Rotary Switches ●Trackballs TOKYOTOKYO SOSOKUTEIKIZAIKUTEIKIZAI Co., LtLtdd. http://www.tosoku-inc.co.jp/

Handy Manual Pulse Generator HC1 Series

Outline HC1 is the most compact model of all our MPG series, developed for usage in numerous industrial areas.

Features

● Compact, thin-line and lightweight (26mm)

● Axis/Multiplication selection can be set according to customers' requirement

● Sealed structured box

● RoHS compliant (box/cord)

● Exclusive easy-to-attach holder as a standard accessory

● Rubber magnet for option

● Logo can be printed on the wheel cover

Specifications

1. Body 4. Curl/Straight Cords Dimension 124×73×26(mm)* 19/25-conductor shielded cable LED Visible Indicator DC24V Green 19-conductor: select from 2m, 3m, 4m, 5m 25-conductor: select from 3m, 5m Noise Immunity EN50082-2 compliant Curl Cord (We will select either 19 or 25-conductor in accordance Other Features Logo available on the wheel cover with required functions) * excluding hook, switch and knob For further details, please see the catalogues for curl cords Straight 2. Mechanical specifications Also available Cord 2.1 Rotary Encoder Unit

* See RE45B page for details 5. Connector Unit Waterproofed connector to be attached on the end of 2.2 Selector Switches Connector the cord optionally provided * See MR8A/MR8C page for details

3. Environmental specifications -10 +60 Operating temperature ℃ ℃ 14F ~ 140F -40 +70 Warranty Storage temperature ℃ ℃ 40F ~ 158F ● 1 year from the date of shipment. Dimensions (mm)

HC1 main unit with curl cord Original Holder(THA)

㻟㻝 㻞㻢 㻱㻮㻿㻼㻞㻝㻝㻥㻹㻳 㻞㻟㻚㻢 㻣㻟 㻝㻡 㻣㻟 㻤 㻝㻞

㻿㼏㼍㼘㼑㻌㻼㼘㼍㼠㼑 㻸㻱㻰 㻞㻟

䠴 䠵 䠶 䠴䠍 䠴䠍䠌 䠴䠍䠌䠌 䠫䠢䠢 䠐 㻸㼍㼎㼑㼘

㻹㼡㼘㼠㼕㼜㼘㼕㼏㼍㼠㼕㼛㼚 㻢㻙㻹㻠㼔㼛㼘㼑

㻭㼤㼕㼟㻌㻿㼑㼘㼑㼏㼠㼕㼛㼚 㻿㼑㼘㼑㼏㼠㼕㼛㼚 㻝㻜㻜 䠌 䠕䠌 㻸㼛㼓㼛㻌㻹㼍㼞㼗 䠍䠌

䠔䠌

䠎䠌 㻝㻞㻠

㻝㻠㻞

䠓䠌

䠏 㻡㻜

䠒䠌

䠌 㻝㻜㻜㻜 㻔㻞㻡㻜㻕 䠐 䠑䠌 㻰㼕㼍㼘 㻟㻞 㻔㻝㻡㻜㻕

䠄㻡㻡䠅 㻣㻤 㻟㻞

㻹㼍㼠㼑㼞㼕㼍㼘䠖㻿㻼㻯㻯㻔㼠㻞㻚㻟㻕 㻔㻮㼘㼍㼏㼗㻌㼏㼔㼞㼛㼙㼍㼠㼑㻌㼒㼕㼘㼙㼕㼚㼓㻕

Part Number Designation

㻴㻯㻝 㻞 㻝㻭㻮㻞㻝㻜㻟

㻺㼍㼙㼑㻌㼛㼒㻌㼟㼑㼞㼕㼑㼟 㻻㼜㼠㼕㼛㼚㼍㼘㻌㼟㼑㼘㼑㼏㼠㼛㼞㻌㼟㼣㼕㼠㼏㼔 㼚㼛㼚㼑 㼟㼑㼘㼑㼏㼠㼕㼛㼚㻌㼟㼣㼕㼠㼏㼔 㼚㼡㼙㼎㼑㼞㻌㼛㼒㻌㼜㼡㼘㼟㼑 䈜㻢 㻜㻟 㻰㼕㼓㼕㼠㼍㼘㻌㼏㼛㼐㼑㻌㼟㼣㼕㼠㼏㼔 㻝 㻝㻜㻜㻌㻼㻼㻾 㻔㻳㼞㼍㼥㻌㼏㼛㼐㼑㻌㻟㻜㼻㼠㼥㼜㼑㻕 䈜㻝 㻞 㻞㻡㻌㻼㻼㻾 䈜㻢㻌㼀㼔㼑㻌㼟㼠㼍㼞㼠㼕㼚㼓㻌㼜㼛㼟㼕㼠㼕㼛㼚㻌㼛㼒㻌㼍㻌㼏㼛㼞㼐㼟㼣㼕㼠㼔㼏㻌㼕㼟㻌㻜㻘㻌㼍㼚㼐㻌㼠㼔㼑㻌㼟㼠㼑㼜㻌㼍㼚㼓㼘㼑㻌㼕㼟㻌㻟㻜㼻㻚 䈜㻝㻌㻝㻜㻜㻌㼏㼘㼕㼏㼗㼟㻌㻛㻌㻞㻡㻌㼜㼡㼘㼟㼑㼟㻌㼜㼑㼞㻌 䈜㻡 㻻㼜㼠㼕㼛㼚㼟㻌㼛㼒㻌㼏㼛㼚㼚㼑㼏㼠㼛㼞㼟 㼞㼛㼠㼍㼠㼕㼛㼚㻚 㻜 㼣㼕㼠㼔㼛㼡㼠㻌㼏㼛㼚㼚㼑㼏㼠㼛㼞 㼜㼛㼣㼑㼞㻌㼟㼡㼜㼜㼘㼥㻌㼢㼛㼘㼠㼍㼓㼑 㻝 㼃㼕㼠㼔㻌㼍㻌㼙㼍㼘㼑㻌㼟㼕㼐㼑㻌㼏㼛㼚㼚㼑㼏㼠㼛㼞㻌 㻝 㻝㻞㼂 㻞 㼃㼕㼠㼔㻌㼍㻌㼙㼍㼘㼑㻌㻒㻌㼍㻌㼒㼑㼙㼍㼘㼑㻌㼟㼕㼐㼑㻌㼏㼛㼚㼑㼏㼠㼛㼞 㻡 㻡㼂 㻥 㼃㼕㼠㼔㻌㼍㻌㼟㼜㼑㼏㼕㼒㼕㼏㼍㼠㼕㼛㼚㻌㼏㼛㼚㼚㼑㼏㼠㼛㼞 㻰 㻡㼂 䈜㻡㻌㻵㼚㻌㼏㼍㼟㼑㻌㼚㼛㼠㼔㼕㼚㼓㻌㼟㼜㼑㼏㼕㼒㼕㼑㼐㻘㻌㼠㼔㼑㼞㼑㻌㼣㼕㼘㼘㻌㼎㼑㻌㼚㼛㻌㼏㼛㼚㼚㼑㼏㼠㼛㼞㻌㼍㼠㼠㼍㼏㼔㼑㼐㻚 㻔㼍㻌㼐㼕㼒㼒㼑㼞㼑㼚㼠㼕㼍㼘㻌㼛㼡㼠㼜㼡㼠㻕 㻯㼡㼞㼘㻌㻯㼛㼞㼐 䈜㻞 㻞 㻞㻠㼂 䈜㻠 㻝 㼃㼕㼠㼔㻌㻞㼙㻌㼏㼡㼞㼘㻌㼏㼛㼞㼐䠆㻌 㻔㼒㼛㼞㻌㼜㼔㼛㼠㼛㼏㼛㼡㼜㼘㼑㼞㻌㼛㼚㼘㼥㻕 㻞 㼃㼕㼠㼔㻌㻟㼙㻌㼏㼡㼞㼘㻌㼏㼛㼞㼐 䈜㻞㻌㻻㼡㼠㼜㼡㼠㻌㼏㼕㼞㼏㼡㼕㼠㻌㼕㼟㻌㼛㼜㼑㼚㻌㼏㼛㼘㼘㼑㼏㼠㼛㼞㻚 㻟 㼃㼕㼠㼔㻌㻡㼙㻌㼏㼡㼞㼘㻌㼏㼛㼞㼐 㻠 㼃㼕㼠㼔㻌㻠㼙㻌㼏㼡㼞㼘㻌㼏㼛㼞㼐䠆 䈜㻠㻌㼀㼛㼟㼛㼗㼡㻌㼏㼔㼛㼛㼟㼑㻌㼠㼔㼑㻌㼚㼡㼙㼎㼑㼞㻌㼛㼒㻌㼏㼍㼎㼘㼑㼟㻌㼎㼥㻌㼠㼔㼑㻌㼒㼡㼚㼏㼠㼕㼛㼚㻚 㻖㻝㻥㻌㼏㼛㼚㼐㼡㼏㼠㼛㼞㼟㻌㼛㼚㼘㼥

㻸㼛㼓㼛㻌㻹㼍㼞㼗㻌㼛㼚㻌㻰㼕㼍㼘 㻮 㼃㼕㼠㼔㻌㼀㻻㻿㻻㻷㼁㻌㻸㼛㼓㼛㻌㻹㼍㼞㼗 㻯 㼃㼕㼠㼔㻌㻺㼛㻌㻸㼛㼓㼛㻌㻹㼍㼞㼗㻌 㻰 㼃㼕㼠㼔㻌㼍㻌㼟㼜㼑㼏㼕㼒㼕㼑㼐㻌㻸㼛㼓㼛㻌㻹㼍㼞㼗

䈜㻟 㻭㼤㼕㼍㼘㻌㻿㼑㼘㼑㼏㼠㻌㻰㼑㼟㼏㼞㼕㼜㼠㼕㼛㼚 㻹㼍㼓㼚㼕㼒㼕㼏㼍㼠㼕㼛㼚㻌㻿㼑㼘㼑㼏㼠㻌㻰㼑㼟㼏㼞㼕㼜㼠㼕㼛㼚 㻭 㻻㻲㻲㻌㻌㼄㻌㻌㼅㻌㻌㼆㻌㻌㻠 㽢㻝㻌㻌㽢㻝㻜㻌㻌㽢㻝㻜㻜 䖩㻴㻯㻝㻝㻡㻌㼕㼟㻌㼒㼛㼞㻌㻲㻭㻺㻭㻯㻌㻺㻯㻌㼑㼝㼡㼕㼜㼙㼑㼚㼠㻚 㻮 㻻㻲㻲㻌㻌㼄㻌㻌㼅㻌㻌㼆㻌㻌㻠㻌㻌㻡㻌 㽢㻝㻌㻌㽢㻝㻜㻌㻌㽢㻝㻜㻜 䖩㻴㻯㻝㻞㻝㻌㼕㼟㻌㼒㼛㼞㻌㻹㻵㼀㻿㼁㻮㻵㻿㻴㻵㻌㻺㻯㻌㼑㼝㼡㼕㼜㼙㼑㼚㼠㻚 㻯 㻻㻲㻲㻌㻌㼄㻌㻌㼅㻌㻌㼆㻌㻌㻠㻌㻌㻡㻌㻌㻢 㽢㻝㻌㻌㽢㻝㻜㻌㻌㽢㻝㻜㻜 㻔㻹㻱㻸㻰㻭㻿㻕 㻰 㻻㻲㻲㻌㻌㼄㻌㻌㼅㻌㻌㼆㻌㻌㻠㻌㻌㻡㻌㻌㻢㻌㻌㻣 㽢㻝㻌㻌㽢㻝㻜㻌㻌㽢㻝㻜㻜 㻱 㻻㻲㻲㻌㻌㼄㻌㻌㼅㻌㻌㼆㻌㻌㻠㻌㻌㻡㻌㻌㻢㻌㻌㻣㻌㻌㻤 㽢㻝㻌㻌㽢㻝㻜㻌㻌㽢㻝㻜㻜 㻲 㻻㻲㻲㻌㻌㼄㻌㻌㼅 㽢㻝㻌㻌㽢㻝㻜㻌㻌㽢㻝㻜㻜 㻳 㻻㻲㻲㻌㻌㼄㻌㻌㼅㻌㻌㼆 㽢㻝㻌㻌㽢㻝㻜㻌㻌㽢㻝㻜㻜 㻴 㼄㻌㻌㻌㼅 㽢㻝㻌㻌㽢㻝㻜㻌㻌㽢㻝㻜㻜 㻶 㼄㻌㻌㻌㼅㻌㻌㼆 㽢㻝㻌㻌㽢㻝㻜㻌㻌㽢㻝㻜㻜 㻷 㼄㻌㻌㼅㻌㻌㼆㻌㻌㻠 㽢㻝㻌㻌㽢㻝㻜㻌㻌㽢㻝㻜㻜 㻸 㼄㻌㻌㼅㻌㻌㼆㻌㻌㻠㻌㻌㻡 㽢㻝㻌㻌㽢㻝㻜㻌㻌㽢㻝㻜㻜 㻹 㼄㻌㻌㼅㻌㻌㼆㻌㻌㻠㻌㻌㻌㻡㻌㻌㻢㻌 㽢㻝㻌㻌㽢㻝㻜㻌㻌㽢㻝㻜㻜 㻺 㼄㻌㻌㼅㻌㻌㼆㻌㻌㻠㻌㻌㻡㻌㻌㻢㻌㻌㻣 㽢㻝㻌㻌㽢㻝㻜㻌㻌㽢㻝㻜㻜 㻼 㼄㻌㻌㼅㻌㻌㼆㻌㻌㻠㻌㻌㻡㻌㻌㻢㻌㻌㻣㻌㻌㻤 㽢㻝㻌㻌㽢㻝㻜㻌㻌㽢㻝㻜㻜 䈜㻟㻌㻰㼑㼟㼏㼞㼕㼜㼠㼕㼛㼚㻌㼛㼠㼔㼑㼞㻌㼠㼔㼍㼚㻌㼍㼎㼛㼢㼑㻌㼕㼟㻌㼍㼢㼍㼕㼘㼍㼎㼘㼑㻌㼡㼜㼛㼚㻌㼞㼑㼝㼑㼟㼠㻚 Circuitry

+5V HC115 A*** -

- DI AL Curl C ode Wiring R1 R2R3 R 4CD 1 Col or o f w ir e Sup pl y Vol ta ge: 5V T elN roT m . e ils r ny m a m i b n o a l Fu nc ti o n 5 +5V 0VB Out pu t: 5V 1 B rown Di al + 5VD C 4 B 2 CO M Re d 3 A 3 O rang e R eso lu tio n: 100 PP R A ×1 2 1 ×1 0 Y ello w (10 0- De1 ten t) 0V 2 4 G reen ×1 00 Di al 0 VDC C3 C4 TR1 TR2C2 5 B lue 3 MA GN IFI CA TIO N 6 P urpl e 4 7 8 G ray C onT me mrlo om iultiplicatio fM n a nSw i t c h 5 9 X W hite Di al C han ne l B Out pu t( 0/5 V) ×10 6 Y B lack 7 Z Di al C han ne l A Out pu t( 0/5 V) ×1 COM 8 P ink 9 4 10 L ight blu e AX IS SE× 100 LE CTO R x1 5 11 Y ello w-gr×1 een (O FF ) 6 x10 12 L ight pur×1 ple 0 COM x10 0 13 -L ×1 00 10 14 +L Ax is X X 11 15 Ax is Y - 12 16 Ax is Z Y 13 17 E C olor -lessAx is 4 Lig ht b rown Z 14 18 (A xi s 5) Z (A xi s 6) 4 15 19 C olo r- le ss/ BK Li gh t bL lu E e DL /B a K m p( - ) 4 16 LE D La mp +2 4VD C Y Y ell ow -g ree n/ BK LAX MP (5 ) Sh ie ld ing W ire (c onn ec t to GN D) (6 ) 17 20 OFCO F M 18 5 * / BK:w ith B lack line 6 19

-L 20 +L Shi el d LE D Lam p andLE Swi D Ltches am p E

R1 Y X 1 0 X Z X 1 X 100 OF F 4

Axi s Sel ec torM ag S ni wi fic tch at ion S wit ch

HC1 -7 M ar.2 1,2 012 Circuitry

HC115A***03 Curl Code Wiring

TerminalNo.Terminalsymbol Colorofwire Brown 1 +5V Dial +5VDC Red 2 - Supply Voltage:5V Orange 3 B Output:5V Yellow 4 - Green 5 A Blue 6 Function0V Dial 0VDC 1 Purple 7 RC Gray MAGNIFICATION 2 8 R1 White CommonT9 erminaloR2fMultiplicationSwitch Black Dial Channel B Output(0/5V) 3 Terminal10 E R4 4 Pink 11 - R1 R2R3 R4 CD1 Light blue TerminalDial Channel A A Output(0/5V) 5 12 L1 5 +5V Yellow-greenTerminal B 6 13 L2 4 B Light purple 7 Terminal14 E L4 (100-Detent) 3 A DIAL Resolution:100PPR 15 L8 2 8 Terminal A 0V Color-less/BK 16 LC 1 C3 C4TR1 TR2 C2 9 Light blue/BKTerminal B 10 Terminal17 D -L Yellow-green/BK 18 +L 11 Light brown 19 - 12 20 E E 13 Color-less E A B RC X1 A 14 R1 CommonTerminalofAxisSelectorSwitch X10 B R2 X100 D LEDLamp(-) R4 C LED Lamp +24VDC

L1 Shielding Wire(connect to GND) EA B D L2 OFF L415 X E L816 Y A LC17 * /BK:with Black line AXIS SELECTOR Z 4 B 18 D C 20 LED Lamp and Switches 19 -L Magnification Switch +L

Shield X Y Z X1 X10 X100 R1 E LED Lamp OFF 4 LAMP

Axis Selector Switch

HC1-6 Mar.21,2012 Circuitry

HC11DA*** Curl Code Wiring

Terminal No.Terminal symbolColorofwire Function 1 +5V Brown Dial +5VDC 2 Red SupplyVoltage:5V 3 B Orange Output:Differential 4 Yellow 5 5 A Green Resolution:1004PPR B Dial Channel B Inverting Output Output 6 0V Blue Dial 0VDC Dial Channel B Output 3 1 7 COM Purple (100-Detent) A Dial Channel A Inverting Output 2 CD1 2 8 ×1 Gray DIAL +5V Dial Channel A Output C2 C3 IC1 26C31 C1 9 ×10 White B 3 10 ×100 BlackCommonTerminalofMultiplicationSwitch B MAGNIFICATION 11 X Pink A4 ×1 12 Y Light blue ×10 A5 13 Z Yellow-green 0V ×100 6 14 4 Light purple Axis X 1 15 5 Color-less Axis Y 7 16 6 Axis Z 17 -L 8 Axis 4 18 +L 9 (Axis 5) 19 - Light brown Color-less/BK (Axis 6) 10 20 E Shielding wire(connect to GND) Light blue/BK LED Lamp (-) ×10 Yellow-green/BK LED Lamp +12~+24VDC ×1 COM 11 x1 ×100AXIS SELECTOR 12 (OFF) x10 COM x100 13 X 14 Z 4 Y 15 Y (5) Z 16 X 4

17 (6) 18 * /BK:with Black line OFF COM LAMP 5 19 6 20 -L +L Shield E R1 Magnification Switch Y X1 X10 X100 LED LampX and SwitchesZ LED Lamp OFF 4

Axis Selector Switch

HC1-5 Mar.21,2012

How to mount knobs for selector switches (HC1/HM/HT series)

1. All switches select OFF circuits (position no.1) when fully turned counterclockwise. 1 click/2 clicks clockwise will make a connection of position no.2/no.3 with COM which feeds a signal for each.

2. If the indications on the plate begin with “OFF”, “0” or any other indication to render disconnection, confirm that the shaft is turned fully counterclockwise to the end, Picture 1. plate then screw the knob on to it within 5kgf.cm of torque. If the indications begin with “X”, “x1” or any other indication to render connection, 1) turn 1 click clockwise from the very left end, 2) adjust the white line on the knob with the indication, then 3) tighten the screw of the knob (cf. picture 2. multiplier switch).

3. The standard wiring diagrams indicated do not necessarily be consistent with the actual delivered products. Confirm the diagrams on the specifications when mounting the knobs.

4. When the knob is turned, it will stop where stopper-pin is inserted. To alter the position to stop, refer to picture 3 and 4, then re-insert the pin into the designated position.

Picture 2. Indications and wiring

Numbers and alphabets with ○ show positions to start, and those with □ show positions to stop. Picture 3. The back of the knob Select the appropriate position from the picture 4 (holes for stopper-pins) and insert the pins into the correspondent positions.

e.g. The plate shown in the picture 1 will be set as follows. Axis Selector: A, 4/ Multiple Selector: B, 3.

Picture 4. Correspondent Positions of the Pins

Handy Manual Pulse Generator HM Series

Outline HM series have a variety of switches which can be customized according to your requests. The model is compact and lightweight, which is perfect for accurate and smooth manual operation.

Features

● Various switches available : Emergency switch (2 positions), side mounted (right/left) enabling switches, 2 rotary switches (as axis and multiplication selector etc. )

● Compact, thin-line and lightweight. ● Strong plate magnets available on back side. (optional ) ● RoHS compliant (box/cord) ● Various types of curl cords provided along with connectors of all sorts at your request.

Specifications

1. Body 2.2 Selector Switches Dimension 145×73×35(mm) MR8A (Rotary switch) 25V15mA (AC/DC) LED light DC24V Green MR8C (Code switch) 15V10mA (AC/DC) * See MR8A/MR8C pages for details Enabling Switch Available on both sides Logo Logo available on the wheel cover 3. Curl/Straight Cords 19/25-conductor shielded cable 2. Mechanical specifications 19-conductor: select from 2m, 3m, 4m, 5m 2.1 Rotary Encoder Unit 25-conductor: select from 3m, 5m Curl Cord (We will select either 19 or 25-conductor in accordance Output Voltage DC5V±10%, DC12V±10% with required functions) Wheel 100 clicks / rotation For further details, please see the catalogues for curl 100 puluse or 25 pulses per rotation cords Rotational Durability Over 1,000,000 times Straight Also available Output Waveform Cord 1) Turning the shaft clockwise would generate the signal A when the signal B 4. Connector Unit outputs a low voltage (0); Dripproofed connector to be attached on the end of the 2) Rotating the shaft counter-clockwise would generate the signal A when the Connector signal B outputs a high voltage(1); cord optionally provided

㻯㼘㼛㼏㼗㼣㼕㼟㼑 㻯㼛㼡㼚㼠㼑㼞㼏㼘㼛㼏㼗㼣㼕㼟㼑 㻝 㻿㼕㼓㼚㼍㼘㻌㻭 㻜 㻝 㻿㼕㼓㼚㼍㼘㻌㻮 Warranty 㻜 ● 1 year from the date of shipment. 㻞㻡㻼㻼㻾㻌㻰㼑㼠㼑㼚㼠㻌㻼㼛㼟㼕㼠㼕㼛㼚㼟

㻝㻜㻜㻼㻼㻾㻌㻰㼑㼠㼑㼚㼠㻌㻼㼛㼟㼕㼠㼕㼛㼚㼟 * See RE45B page for details Dimensions (mm)

HM Unit with curl cord ※ This drawing is an example, it may differ according to number of swithes etc.

㻔㻟㻡㻕 㼃㼕㼠㼔㻌㻰㼞㼕㼜㼜㼞㼛㼛㼒㼑㼐㻌㼏㼛㼚㼚㼑㼏㼠㼛㼞 㻥 䠄㻢㻚㻡䠅 㻣㻟 㻰㻰㻷

㻞㻟 㻱㼙㼑㼞㼓㼑㼚㼏㼥㻌㻿㼠㼛㼜㻌㻿㼣㼕㼠㼏㼔

㻸㼍㼎㼑㼘 㻱㼚㼍㼎㼘㼕㼚㼓 䠵 䠶 䠐 㽢䠍 㽢䠍䠌 㽢䠍䠌䠌 㻿㼣㼕㼠㼏㼔 䠴 䠑 䠫䠢䠢 㻹㼡㼘㼠㼕㼜㼘㼕㼏㼍㼠㼕㼛㼚 㻭㼤㼕㼟㻌㻿㼑㼘㼑㼏㼠㼛㼞 㻿㼑㼘㼑㼏㼠㼛㼞 㻝㻜㻜

㻝㻠㻡 㻸㻱㻰 㻿㼏㼍㼘㼑㻌㻼㼘㼍㼠㼑 㻝㻜㻜㻜 㻔㻞㻡㻜㻕 㻸㼛㼓㼛㻌㻹㼍㼞㼗

䠄㻟㻝䠅 㻰㼕㼍㼘

㻝㻥㻛㻞㻡 㻔㻝㻡㻜㻕

㻔㻡㻡㻕 㼏㼛㼚㼐㼡㼏㼠㼛㼞㼟

㻸㼑㼚㼓㼠㼔㻌㻔㼍㼟㻌㼞㼑㼒㼑㼞㼑㼚㼏㼑㻕 㼒㼛㼞㻌㻞㼙 䠄䚷䠐䠒䠌㼙㼙䠅 㻖 㼒㼛㼞㻌㻟㼙 䠄䚷䠒䠕䠌㼙㼙䠅 㼒㼛㼞㻌㻠㼙 䠄䚷䠕䠎䠌㼙㼙䠅 㻖 㼒㼛㼞㻌㻡㼙 䠄䠍䠌䠔䠌㼙㼙䠅 㻖㻝㻥㻌㼏㼛㼚㼐㼡㼏㼠㼛㼞㼟㻌㼛㼚㼘㼥 㻸

㻣㻟 Samples of Case layout Original Holder 㻠㻜 㻣㻠㻚㻡 㻞㻟 㻝㻢 㻝㻞

䝷䝧䝹

㻝㻜㻜 㻝㻡 㼅 㼆 㻠 㽢㻝㽢㻝㻜 㽢㻝㻜㻜 㼅 㼆 㼃 㽢㻝㽢㻝㻜 㽢㻝㻜㻜 䠵 䠶 㻠 㼄㻝 㼄㻝㻜 㽢㻝㻜㻜 㼄 㼄 㻮 䠴 㻡 㻤 㻣㻙㻹㻠⏝─✰ 㻻㻲㻲 㻡㻜 㻝㻠㻡 㻝㻢㻝 㻝㻜㻜㻜 㻡㻜 㻥㻚㻟 㻞㻥㻚㻡

㻝㻠㻚㻡 H M series Order Sheet (Print out this page for sending orders.) WeWe'll'll hand in to you a drawing in accordance with your order. The drawing shall be approved before starting in on production. 1) Select one from each spec table and fill blank spaces with "○". Axis Selector/Multiplication Selector Switches Pulses/Rev. MR8C type(Gray code switch) 100PPR MR8A type(Selection switch) * 25PPR *25PPR25PPR and yetyet 100 Clicks/RevolutionClicks/Revolution Indications for Axis Selector (left) e.g. OFF, X, Y, Z, 4, 5

Power Supply Output 5V 5V(330Ω Pull Up) Indications for Multiplication Selector (right) 5V Open Collector e.g. ×1, ×10, ×100 5V (for Line Driver) 12V 5V(2.2kΩ Pull Up) 12V 12V(2.2kΩ Pull Up) 12V Open Collector 12V- for Photocoupler Curl Cord Length * 24V (Open Collector) 2m Curl Cord (for only 19-conductor cord) * Transistor will be "OFF" at every 3m Curl Cord clicked positions. 4m Curl Cord (for only 19-conductor cord) (For other open collector output 5m Curl Cord momodelsdels, ttransistorsransistors wwillill bbee ""ON"ON" aatt * WeWe wwillill seselectlect eeitherither 19-con conductorductor corcordd or 25- every clicked positions. conductor cord to cover your requested specs Logo on the dial None with "TOSOKU" logo Waterproofed Connector (for curl cord) with an original logo( ) None Male connector (EBSP2119MG-D, DDK) 2-P2 Positionosition EnEnablingabling SSwitchwitch Female connector (EBSP2119FGSEBSP2119FGS-D-D,, DDK) None * Fill in both spaces to order both connectors. One on the left On both sides 2) Other options Other options to request (e.g.) Switches with LED illumination x 2 Emerggyency Switch (contacts) 2 contact selector switch x1 None Mounted ( ) * 1 for (NO), 4 for (NC) maximum (1A/4B). Maximum of 4 contacts in total (1A3B or 4B).

Magnet on the backside NoneN Mounted

●Rotary Encoders ●Code Switches ●Pulse Generators ●Lever Switches 12.6 ●Rotary Switches ●Trackballs TOKYOTOKYO SOSOKUTEIKIZAIKUTEIKIZAI Co., LtLtdd. http://www.tosoku-inc.co.jp/

Handy Manual Pulse Generator HR Series

Outline HR series provide you comfort in long time use and safety with various options of switches.

Features

● Ergonomically designed to be held with one hand ● 3-position (off-on-off) switch available on both sides ● RoHS compliant (box/cord) ● Upper part is free to design and allows various kinds of switches (including emergencystop button) to be set ● HR series also provide you various line-up of switches to be set on the middle part: DP - the digital code switch series, RS400 - the rotary switch series etc. ● Strong plate magnets available on back side. (optional) ● Various types of curl cords provided along with connectors by all sorts of your request

Specifications

1. Body 2.2 Selector Switches Dimension 190×100×50.5(mm) * See RS400/DP pages for details Enabling Switch Available on both sides 3. Curl/Straight Cords Other Features Logo available on the wheel cover 19/25-conductor shielded cable 19-conductor: select from 2m, 3m, 4m, 5m 2. Mechanical specifications 25-conductor: select from 3m, 5m 2.1 Rotary Encoder Unit Curl Cord (We will select either 19 or 25-conductor in accordance Output Voltage DC5V±10%, DC12V±10% with required functions) For further details, please see the catalogues for curl Wheel 100 clicks / rotation cords 100 puluse or 25 pulses per rotation Straight Rotational Durability Over 1,000,000 times Also available Cord Output Waveform 1) Turning the shaft clockwise would generate the signal A when the signal B 4. Connector Unit outputs a low voltage (0); Dripproofed connector to be attached on the end of the Connector 2) Rotating the shaft counter-clockwise would generate the signal A when the cord optionally provided signal B outputs a high voltage(1);

㻯㼘㼛㼏㼗㼣㼕㼟㼑 㻯㼛㼡㼚㼠㼑㼞㼏㼘㼛㼏㼗㼣㼕㼟㼑 㻝 㻿㼕㼓㼚㼍㼘㻌㻭 㻜 㻝 Warranty 㻿㼕㼓㼚㼍㼘㻌㻮 㻜 ● 1 year from the date of shipment.

㻞㻡㻼㻼㻾㻌㻰㼑㼠㼑㼚㼠㻌㻼㼛㼟㼕㼠㼕㼛㼚㼟

㻝㻜㻜㻼㻼㻾㻌㻰㼑㼠㼑㼚㼠㻌㻼㼛㼟㼕㼠㼕㼛㼚㼟 * See RE45B page for details Dimensions (mm)

HR Unit with curl cord ※ This drawing is an example, it may differ according to number of swithes etc.

㻔㻡㻜㻚㻡㻕 㻝㻜㻜

㻞㻠 㻱㼙㼑㼞㼓㼑㼚㼏㼥㻌㻿㼠㼛㼜 㻿㼣㼕㼠㼏㼔 㼃㼕㼠㼔㻌㻰㼞㼕㼜㼜㼞㼛㼛㼒㼑㼐㻌㼏㼛㼚㼚㼑㼏㼠㼛㼞

㻰㻰㻷

㻸㻱㻰

㻱㼚㼍㼎㼘㼕㼚㼓 㻸㼍㼎㼑㼘 㻿㼣㼕㼠㼏㼔 䠵 䠶 䠐 㽢䠍 㽢䠍䠌 㽢䠍䠌䠌 䠴 䠑

㻝㻥㻜 㻭㼤㼕㼟 䠫䠢䠢 㻹㼡㼘㼠㼕㼜㼘㼕㼏㼍㼠㼕㼛㼚

㻿㼑㼘㼑㼏㼠㼛㼞 㻿㼑㼘㼑㼏㼠㼛㼞 㻝㻜㻜 㻿㼏㼍㼘㼑㻌㻼㼘㼍㼠㼑 㻝㻜㻜㻜 㻔㻞㻡㻜㻕 㻸㼛㼓㼛㻌㻹㼍㼞㼗

㻰㼕㼍㼘 䠄㻟㻝䠅 㻔㻝㻡㻜㻕

㻔㻡㻡㻕 㻸㼑㼚㼓㼠㼔㻌㻔㼍㼟㻌㼞㼑㼒㼑㼞㼑㼚㼏㼑㻕 㻝㻥㻛㻞㻡㻌㼏㼛㼚㼐㼡㼏㼠㼛㼞㼟 㼒㼛㼞㻌㻞㼙 䠄䚷䠐䠒䠌㼙㼙䠅 㻖 㼒㼛㼞㻌㻟㼙 䠄䚷䠒䠕䠌㼙㼙䠅 㼒㼛㼞㻌㻠㼙 䠄䚷䠕䠎䠌㼙㼙䠅 㻖 㼒㼛㼞㻌㻡㼙 䠄䠍䠌䠔䠌㼙㼙䠅 㻖㻝㻥㻌㼏㼛㼚㼐㼡㼏㼠㼛㼞㼟㻌㼛㼚㼘㼥

㻸 Original Holder 㻹㼍㼠㼑㼞㼕㼍㼘㻌㻦㻌㻿㻼㻯㻯 㻥㻚㻣 㻞㻜㻤㻚㻟 㻮㼘㼍㼏㼗㻌㻯㼔㼞㼛㼙㼍㼠㼑 㻠㻜 㼼㻜㻚㻝 㻠㻜 㼼㻜㻚㻝 㻢㻞㻚㻟 㻞㻤 㻤㻣

㻴㼛㼘㼑㻌㼒㼛㼞㻌㻟㻙㻹㻠

㻝㻞 㻟㻞㻚㻝 㻞㻣㻚㻝 H R series Order Sheet (Print out this page for sending orders.) WeWe'll'll hand in to you a drawing in accordance with your order. The drawing shall be approved before starting in on production. 1) Select one from each spec table and fill blank spaces with "○". Axis Selector/Multiplication Selector Switches Pulses/Rev. Gray code switch 100PPR Binary code switch * 25PPR Selection switch *25PPR25PPR and yetyet 100 Clicks/RevolutionClicks/Revolution Indications for Axis Selector (left) e.g. OFF, X, Y, Z, 4, 5 Power Supply Output 5V 5V(330Ω Pull Up) 5V Open Collector Indications for Multiplication Selector (right) 5V (for Line Driver) e.g. ×1, ×10, ×100 12V 5V(2.2kΩ Pull Up) 12V 12V(2.2kΩ Pull Up) 12V Open Collector 12V- for Photocoupler Curl Cord Length * 24V (Open Collector) 2m Curl Cord (for only 19-conductor cord) * Transistor will be "OFF" at every 3m Curl Cord clicked positions. 4m Curl Cord (for only 19-conductor cord) (For other open collector output 5m Curl Cord modelsmodels, ttransistorsransistors wwillill bbee ""ON"ON" aatt * WeWe wwillill seselectlect eeitherither 19-con conductorductor corcordd or 25- every clicked positions. conductor cord to cover your requested specs Logo on the dial None with "TOSOKU" logo Waterproofed Connector (for curl cord) with an original logo( ) None Male connector (EBSP2119MG-D, DDK) 3-P Positionsositions EnEnablingabling SSwitchwitch (co(contacts)ntacts) Female connector (EBSP2119FGSEBSP2119FGS-D-D,, DDK) None * Fill in both spaces to order both connectors. One on the left( ) On both sides( ) 2) Other options * Assigned contacts should be 2 or Other options to request less for normally open (NO) and 2 or (e.g.) less for normally closed (NC). Switches with LED illumination x 2 (2A2B maximum.) 2 contact selector switch x1 Emergency Switch (contacts) None Mounted ( ) * 1 for (NO), 4 for (NC) maximum (1A/4B). Maximum of 4 contacts in total (1A3B or 4B). Magnet on the backside NoneN Mounted

●Rotary Encoders ●Code Switches ●Pulse Generators ●Lever Switches 12.6 ●Rotary Switches ●Trackballs TOKYOTOKYO SOSOKUTEIKIZAIKUTEIKIZAI Co., LtLtdd. http://www.tosoku-inc.co.jp/

Handy Manual Pulse Generator HS Series

Outline HS is a free-to-design handheld manual pulse generator which allows wide variety of switches laid out at your service.

Features

● Optional layout of switches ● 3-position (off-on-off) switch available on both sides ● RoHS compliant (box/cord) ● Emergency stop button also available ● Holder provided ● Strong plate magnet as an additional accessory. (optional) ● Various types of curl cords provided along with connectors by all sorts of your request

Specifications

1. Body 2.2 Selector Switches Dimension 180×96×50(mm) RS400 (Rotary switch) Enabling Switch Available on both sides AC 30V1.0A / 200V0.2A DC 20V1.0A / 200V0.1A (Registance Load) Other Features Logo available on the wheel cover DP (Code switch) AC 5V0.5V/50V0.05A DC 5V0.25A / 25V0.05A (Registance Load) 2. Mechanical specifications 2.1 Rotary Encoder Unit * See RS400/DP pages for details Output Voltage DC5V±10%, DC12V±10% 3. Curl/Straight Cords Wheel 100 clicks / rotation 100 puluse or 25 pulses per rotation 19/25-conductor shielded cable 19-conductor: select from 2m, 3m, 4m, 5m Rotational Durability Over 1,000,000 times 25-conductor: select from 3m, 5m Output Waveform Curl Cord (We will select either 19 or 25-conductor in accordance 1) Turning the shaft clockwise would generate the signal A when the signal B with required functions) outputs a low voltage (0); For further details, please see the catalogues for curl 2) Rotating the shaft counter-clockwise would generate the signal A when the cords Straight signal B outputs a high voltage(1); Also available Cord 㻯㼘㼛㼏㼗㼣㼕㼟㼑 㻯㼛㼡㼚㼠㼑㼞㼏㼘㼛㼏㼗㼣㼕㼟㼑 㻝 㻿㼕㼓㼚㼍㼘㻌㻭 㻜 4. Connector Unit 㻝 㻿㼕㼓㼚㼍㼘㻌㻮 㻜 Dripproofed connector to be attached on the end of the Connector cord optionally provided 㻞㻡㻼㻼㻾㻌㻰㼑㼠㼑㼚㼠㻌㻼㼛㼟㼕㼠㼕㼛㼚㼟

㻝㻜㻜㻼㻼㻾㻌㻰㼑㼠㼑㼚㼠㻌㻼㼛㼟㼕㼠㼕㼛㼚㼟 Warranty * See RE45B page for details ● 1 year from the date of shipment. HS Layoutexamples HS Mainunit HS Originalholder

㻥㻠 㻞㻣 㻤㻞 㻡㻜 㻔㻟㻡㻕 㻥㻢

㻝㻢㻚㻡 㻞㻤 㻝㻢 㻠㻜 䠬䠫䠳䠡䠮 䠨䠫䠳䠤 䠶 䠴 ㏿ᗘ ඃඛ 䠇 䠩䠥䠠 㻞㻞 㻝㻠 䠯䠰䠡䠬 䠮䠱 䠦䠫 㻝㻞 㻞㻡㻚㻣 䠥䠣 䠣 䠪 䠤 ※ ೵Ṇ 䠍䠌䡊 䠍䠌䠌䡊䡉 䠍䡊䡉 䠌䠂 This drawing is an example, it may differ according tonumberofswithesetc. according This drawingisanexample,itmaydiffer 䡉 䠍䠌䠂 䠎䠌䠂 䠍䃛䡉 䠉 Dimensions (mm) 䠑䠌䠂 䠍䠌䃛 䡉 䠍䠌䠌 䠍䠌䠌䃛䡉 㻴㼛㼘㼑㻌㼒㼛㼞㻌㻣㻙㻹 䠎䠌䠌 䠍䠌䡉 䠍䡉 䠂 䡉 䠂 䡉 㻢㻜 䠵 㽢䠍䠌 䠴 䠶 㽢䠍 㽢䠍䠌䠌 㼼㻜㻚㻝 䠫䠢䠢 䠐 㻠 㻝㻤㻜 㻝㻣㻡

㻢㻜 䠉 䠇 㻟㻠 㼼㻜㻚㻝 㼼㻜㻚㻝 㻡㻜 㻟㻜 㼼㻜㻚㻝 ᧯స↓ຠ ᩍ䚷䚷♧ 䠵㍈ཎⅬ᚟ᖐ 䠶㍈ཎⅬ᚟ᖐ 䠝䚷䝏䝱䝑䜽 䠞䚷䝏䝱䝑䜽 䠡䚷䝏䝱䝑䜽 䠝䠋䠞䜲䞁䝕䝑䜽 ඲೵Ṇ 䠉 㻔㻠㻡㻕 䝇 㻮㼘㼍㼏㼗㻌㻯㼔㼞㼛㼙㼍㼠㼑 㻹㼍㼠㼑㼞㼕㼍㼘㻌㻦㻌㻿㻼㻯㻯

㻝㻜 㻞㻤 㻞㻤 ཎⅬഃ ᭷ຠ 䝻䠉䝎䚷᧯స┙ 㽢䠍 㽢䚷䠍

䠶㍈䝝䞁䝗䝹 䠵㍈䝝䞁䝗䝹 䠴㍈䝝䞁䝗䝹 䠢䚷䝏䝱䝑䜽 ཯䚷䚷㌿ 䠳䠋䠢䚷᪕ᅇ 䝝䞁䝗䝹ಸ⋡

䝸䝣䝍䚷䠎 䝸䝣䝍䚷䠍 ཯ཎⅬഃ 䠇 䠴 䠵 䠫䠢䠢 䠉 䠉 䠫䠪 㽢䠍 䠇 䠇 㽢䠍 䠌 㽢䠍䠌䠌 TOKYO SOKUTEIKIZAI CO., LTD.

Trackball Catalogue

Trackball TB36 P.61 designed for usage in numerous kinds of devices and equipments

Track ball TB36 Series

Outline TB36 series are high-spec trackballs for various sorts of professional use: for medical devices (e.g. ultrasonic reflectoscope, specular microscope), mixing units of audio devices, factory automation systems etc.

Features

● Low Cost ● RoHS compliant ● Translucent ball with LED option ● Easy Maintenance ● Long life use -Over 3million ball revolutions.

Specifications

0℃ to +45℃ Operating temperature 32F to 113F Supply voltage DC5V±5% no more than 30mA Ball S φ 36mm/1.4inch Output axes 2way axes (X, Y) Pulse 216 pulses per ball generation (±10%) Out put signals Two square wave signals: CMOS (TTL) Ball driving force 15±10mN Life time Over 3million ball revolutions Ball load 200N maximum downward pressure Mounting position Horizontal to 30°

Output Wave form 㻙㼄 㻗㼄 䠍 㻗㼅 㻿㼕㼓㼚㼍㼘㻌㻭 䠌 䠍 㻿㼕㼓㼚㼍㼘㻌㻮 䠌 㻿㼕㼓㼚㼍㼘㻌㼐㼕㼒㼒㼑㼞㼑㼚㼏㼑㻥㻜㼼㻢㻜㼻 㻙㼅 㻰㼕㼞㼑㼏㼠㼕㼛㼚㻌㼛㼒㻌㼎㼍㼘㼘㻌㼞㼛㼘㼘㼕㼚㼓㻌 㻔㼏㼛㼚㼚㼑㼏㼠㼛㼞㻌㼒㼍㼏㼑㻙㼐㼛㼣㼚㻕 Part Number Designation

TB36 L S W ① ② ③ ④

① 38mm Tranck ② Operational touque : Light ③ Output signal: Two square wave output (A/B) ④ Color : W: Ivory white T: Transparent

Dimensions (mm) 㻞㻙䃥㻠㻚㻡

䃥㻠㻡 䕕㻢㻜 㻝㻢㻚 㻡 㻞㻠

䠮㻟㻚㻡 㻝㻢㻚㻡 㻞㻠 㻿䃥㻟㻢 Connection 㻼㼕㼚㻌㻺㼛㻚 㻲㼡㼚㼏㼠㼕㼛㼚

㻠 㻥 㻝 㻗㻡㼂㻌㻵㼚㼜㼡㼠

㻠 㻞 㻜㼂㻌㻯㼛㼙㼙㼛㼚㻌㼞㼑㼠㼡㼞㼚 㻟 㼄㻭㻌㻿㼕㼓㼚㼍㼘㻌㼛㼡㼠㼜㼡㼠 㻔㻟㻤㻕 㻠 㼄㻮㻌㻿㼕㼓㼚㼍㼘㻌㼛㼡㼠㼜㼡㼠

㻞㻡 㻡 㼅㻭㻌㻿㼕㼓㼚㼍㼘㻌㼛㼡㼠㼜㼡㼠 㻢 㼅㻮㻌㻿㼕㼓㼚㼍㼘㻌㼛㼡㼠㼜㼡㼠 㻯㼛㼚㼚㼑㼏㼠㼛㼞㻌㻦㻌 㻝㻞㻟㻠㻡㻢 㻵㻸㻙㻢㻼㻿㻟㻲㻼㻞㻙㻝㻌㻔㻶㻭㻱㻕

Precautions 㻼㼕㼏㼗㻌㼡㼜㻛 㻮㼞㼕㼚㼓㻌㼎㼍㼏㼗 ● Maintenance 㼜㼛㼟㼕㼠㼕㼛㼚 Pick up ball: -Turn the ring counterclockwise by approx. 40°. -Set the idler on the arrow position. Bring back ball: 㻵㼐㼘㼑㼞 -Set the idler on the arrow position, and turn the ring clockwise. ● Cleaning: -XY axis sendor, Idler: Wipe with cotton buds. -Ball: Wipe with dry cloth. : If balls are still unclean, use ethyl alcohol or neutral detergent (grit, alkaline are not included)

NOTE: 1) Any shock or vibration may cause malfunctions. 2) TB36 series are not waterproof.