Single Source Supplier For The Brush Man, LLC 602 W. Hickory Roofing Supply & Contractor Supply Mahomet, IL 61853 Industrial Supply, Janitor Supply PH: 800-274-6898 FX: 800-274-3369 USA Made www.brushman.com Products We sell nationwide [email protected] Look for the flag through distributors to indicate products that are ‘Made In The USA’! only!

Volume XL Celebrating 40 YEARS in 2016! INDEX Extension Ladders...... 41 Rope ...... 24 NEW ITEMS Acid Brushes...... 16 Fall Protection Kit...... 40 Safety Harness...... 40 Select Spreaders & Adhesive Brushes/Chip...... 5 Felt Brooms...... 13 Safety Items: Vee Manifold For Adjustable Shock Cords...... 47 First Aid Kits...... 40 Boots - Slush...... 42 Bungee Cords...... 47 2-Part Adhesives Applicator Pads...... 20 Flags - Pennant...... 3 Floor Squeegees...... 10 - 11 Coveralls, Tri-Tuff® ...... 42 Asphalt Primer...... 36 Fall Protection Kit...... 40 Floor Sweeps...... 12 Aviation Snips...... 33 First Aid Kits...... 40 Axes/Picks/Mattocks...... 9 Fork, Roofers Pitch...... 9 Fuel Cans...... 41 Bags - Trash...... 3 Fuel Cans...... 41 Gloves...... 38 - 39 Band Clamps...... 7 Garbage Bags...... 3 Glasses...... 43 Blade, Floor Scraper...... 32 Glasses - Safety...... 43 Goggles...... 43 Hard Hats...... 43 Blades, Diamond...... 25 Gloves...... 38 - 39 Harness - Roofers...... 40 ...... Goggles...... 43 Blades - Knife 32 Knee Pads...... 40 /Hatchet - Magnetic...... 9 Blue Painter’s Tape...... 37 Pennant Flags...... 3 Black Stiff NOTCHED Blade ...... Boot & Shoe Brush...... 14 Hand Cleaner 47 Pitch Hoods...... 7 Coatings Squeegee Boots, Slush...... 42 Hand Towels...... 47 Pitch Gel/After Cream...... 7 Brushes: Handle Braces...... 15 Rain Suit...... 42 Acid Scrub...... 16 Handles, Threaded/Tapered...... 15 Respirators...... 42 Adhesive...... 5 Handles, Extension...... 15 Rope...... 24 Boot & Shoe...... 14 Handles, Roofing...... 46 Spray Sock...... 43 Tapes (Caution/Danger)...... 3 Bowl...... 16 Hard Hats...... 43 Chip...... Traffic Cones...... 41 5 Hatchet/Hammer - Magnetic...... 9 Microfiber Roller Concrete Finishing...... 11 Vests...... 40 Insulation Knife...... 33 Covers - 9” & 18” Counter...... 18 Wasp Spray...... 40 Deck Scrubs...... 16 Knee Pads...... 40 Saw - Drywall...... 33 Draftsman Brush...... 17 Knife Blades...... 32 Scissors...... See Shears Extension Floor Sweeps...... 12 Knives...... 32 Scoops...... 8 General Purpose...... Ladders 18 Knot Brushes/Roofers...... 13 Scraper, 5-In-1 ...... 32 Hand Scrubs...... 17 Ladders - Extension...... 41 Scrub Brushes...... 16 Industrial...... 20 Leak Stop - Emergency...... 27 ...... Masonry...... 17 Seam Probe/Marker 31 Butyl Lumber Crayons...... 36 ...... Parts Cleaning...... 18 Seam Rollers 30 - 31 Coated Drop Cloths Paint Brushes...... 21 Manifold - 2-Part Adhesive...... 23 Seam Test ... New Style...... 31 Radiator Brush...... 17 Marking Spray Paint...... 36 Shears...... 33 Roofing...... 13 Marking Sticks...... 36 Shingle Remover...... 9 Aviation Snips Sash...... 18 Masking Tape - BLUE...... 37 Shoe Brush...... 14 Smoother Brush...... 17 Masking Tape - Gen. Purp...... 37 Shovels...... 8 - 9 Street Brooms...... 14 Mason Twine...... 24 Truck/Car Wash...... 16 Snips, Aviation...... 33 Masonry Brushes...... 17 Upright Brooms...... 19 Spades...... 8 Individual ...... Utility (Pot)...... 18 Measuring Tapes 34 - 35 Spiked Shoes...... 31 Band Clamps Scrubs/Deck/Car/Truck...... 16 Measuring Wheels...... 34 Sponge, EPDM...... 28 Window Brushes...... 17 Mixers, Mud & Paint...... 26 Spray Sock...... 43 Wire Hand Brushes...... 20 Mop Handles - Dust...... 45 Spreaders - Tank...... 23 Buckets/Pails...... 26 Mop Handles - Wet...... 44 Spud Bar...... 9 Many New Brush Styles Bungee Cords - Adjustable...... 47 Mops, Dust...... 45 Squeegees-Floor...... 10 - 11 Butyl-Based Tapes...... 27 Mops, Roofing...... 46 Squeegees-Notched...... 10 - 11 Car Covers...... 43 Mops, Wet...... 45 Staple ...... 33 Car/Truck Wash Brushes...... 16 Packaging Tape...... 37 Street Brooms...... 14 Caulking Guns...... 29 Pads & Pad Holders...... 29 Stretch Wrap...... 47 Caution/Danger Tape...... 3 Pail Lid Opener...... 26 Tape: Chalk - Marking...... 37 Pails/Buckets...... 26 Caution...... 3 Chalk Reels/Chalk...... 37 Paint: Danger...... 3 Chip Brushes...... 5 Asphalt Primer...... 36 Dispenser...... 37 Kits...... 7 Inverted Marking...... 36 Duct...... 3 Roof Paint...... Clamps, Individual Band...... 7 36 Masking - Blue...... 7 5-In-1 Scraper ...... 21 Measuring...... 34 - 35 Cleaner/Degreaser...... 47 Paint Brushes Paint Scraper, 5-In-1...... 32 Packaging...... 37 Coating Applicators...... 11 Paint Trays...... 21 Tank Spreaders...... 23 Butyl-Based Tapes & Emergency Concrete Finishing Brushes..... 11 Painter’s Plastic...... 22 Tarps...... 22 Leak Stop Cones, Traffic...... 41 Pallet Covers...... 22 Torches, Roofing...... 25 Cones, Warning Diverter...... 3 Pennant Flags...... 3 Traffic Cones...... 41 Core Cutters...... 25 Picks/Mattocks/Axes...... 9 Trash Bags...... 3 Corn Brooms...... 19 Pitch Fork...... 9 Trowels...... 27 Counter Brushes...... 18 Pitch Gel/After Cream...... 7 Truck/Car Wash Brushes...... 16 Coveralls, Tri-Tuff®...... 42 Pitch Hoods...... 7 Twine, Mason...... 24 Covers - Roller...... 4 - 5 Poly Sheeting...... 22 Upright Brooms...... 19 Crayons, Lumber...... 36 Power Cords...... 35 Utility (Pot) Brushes...... 18 Deck Scrubs...... 16 Push Brooms...... 12 Vests - Safety...... 40 Degreaser/Cleaners...... 47 Rags...... 28 Warning Line Diverters...... 3 Diamond Blades...... 25 Radiator Brush...... 17 Wasp Spray...... 40 Driveway Applicators...... 11 Rain Suit...... 42 Window Brushes...... 17 Drop Cloths - Butyl Coated...... 22 Respirators...... 42 Window Squeegees...... 11 Duct Tape...... 3 Roller Covers...... 4 - 5 Wire Hand Brushes...... 20 Dust Mops/Frames...... 45 Roller Frames...... 6 - 7 Wrecking Bars...... 9 Dust Pans...... 19 Roofing Brushes...... 13 Zip Ties...... 24 EPDM Brush...... 5 Roof Paint...... 36 EPDM Scrubbing Sponge...... 28 Roofing Mops & Handles...... 46 ITEMS IN RED ARE Extension Cords...... 35 Roofing Torches...... 25 ALL NEW ITEMS

The Brush Man, LLC www.brushman.com [email protected] PAGE: 2 TRASH BAGS Poke holes in it! There are many ‘3-mil’ trash bags in the field! 3-mil tells Stretch it! you how thick they are - NOT how strong! We have tested many. Here’s one that every roofer can throw off the roof loaded with trash! What about the one you stock? Don’t take for granted - ask your customers!

Every contractor uses them - why USA MADE not offer one that does the job?!

#TRASH BAG 42-20PL...... 3 mil 42 gallon trash bags...... 20 bags/ctn...... 7 lbs/ctn

#TRASH BAG 42-50PL...... 3 mil 42 gallon trash bags...... 50 bags/ctn...... 17 lbs/ctn

55-GALLON BLACK TRASH BAGS - Same great quality but in a 55-gallon bag. USA MADE #TRASH BAG 55-15PL...... 3 mil 55 gallon black trash bags...... 15 bags/ctn...... 6 lbs/ctn

PENNANT FLAGS

Pennant flags are required by OSHA for perimeter marking of every above ground construction area, flat roof jobs and open upper-level • ALL ARE UVI PROTECTED • EXCEEDS OSHA STANDARDS construction. Our pennant flags are attached to a 100 ft. line that • 100’ OVERALL LENGTH exceeds the 500 lb break strength that OSHA now requires. • 48 PENNANTS PER LINE

#PENNANT OSHA Y...... yellow pennant flags...... 10/ctn...... 12 lbs/ctn #PENNANT OSHA R...... red pennant flags...... 10/ctn...... 12 lbs/ctn #PENNANT OSHA RY...... red & yellow pennant flags...... 10/ctn...... 12 lbs/ctn

39” WARNING LINE DIVERTER

39” trimline channelizer designed for service in Meets OSHA requirements! a wide variety of applications. High-impact, USA MADE low-density polyethylene with reinforced easy- • Passes 16# horizontal pull test. grip loop handle, 30# rectangular base. • 39” high tie-off. #SAFETY-DIV-CONE...... 30/pallet...... 1,050 lbs/pallet

• Break-Away Design • 46-1/4” overall height. Bulk • Stackable with or without base. • 30” x 14” base. Pricing • Has 2 mounting holes for warning lights & signs. Available

DUCT TAPE - CONTRACTOR GRADE Baling wire ranks first - duct tape is a close second for holding the world together. Keep many rolls available. 2” x 60 yds.

#TAPE-DUCT GREY...... 8-MIL Grey Contractor Grade...... 24 rolls/ctn...... 31 lbs/ctn USA MADE

#TAPE-DUCT9MIL-R...... 9-MIL RED Contractor Grade...... 24 rolls/ctn...... 30 lbs/ctn Different sizes - colors - grades available - call us!

DANGER / CAUTION TAPE

DANGER DANGER DANGER DANGER DANGER DANGER DANGER DANGER Red ‘DANGER’ tape, black letters. USA MADE #TAPE DANGER300...... 3” x 300’...... 16 rolls/ctn...... 14 lbs/ctn #TAPE DANGER1000..... 3” x 1,000’...... 10 rolls/ctn...... 19 lbs/ctn Other wordings & CAUTION CAUTION CAUTION CAUTION CAUTION CAUTION CAUTION CAUTION lengths available! Yellow ‘CAUTION’ tape, black letters. Special Order #TAPE CAUT10002M...... 2-Mil, 3” x 1,000’...... 10 rolls/ctn...... 19 lbs/ctn

The Brush Man, LLC www.brushman.com [email protected] PAGE: 3 ROLLER COVERS FOR MOST EVERY CONTRACTING JOB

These covers are the best that commercial roofers can use for applying adhesives! Our nap is fused onto a 1-1/2” diameter2-ply polyproplyene core. USA MADE For Most Every Especially made for the commercial Contracting Job! roofer applying adhesive coatings. We tested the many imports and they couldn’t do the job. Performance is more important than price! 2-Ply Poly Core 2-Ply Poly Core VS. Phenolic Core POLY CORE COVERS Cover WIdth Nap Length Qty/Ctn Lbs/Ctn USA MADE #RC18-1/4-HD...... Poly Core...... 18”...... 1/4”...... 24...... 8 #RC18-3/8-HD...... Poly Core...... 18”...... 3/8”...... 24...... 8 #RC18-1/2-HD...... Poly Core...... 18”...... 1/2”...... 24...... 10 #RC18-3/4-HD...... Poly Core...... 18”...... 3/4”...... 24...... 10 What our covers have in common.... #RC18-1-1/4-HD...... Poly Core...... 18”...... 1-1/4”...... 24...... 10 Made in USA (Not Imported!) Extremely Solvent-Resistant - #RC9-1/4-HD...... Poly Core...... 9”...... 1/4”...... 36...... 5 Will Not Disolve! #RC9-3/8-HD...... Poly Core...... 9”...... 3/8”...... 36...... 6 Top quailty polyester nap that #RC9-1/2-HD...... Poly Core...... 9”...... 1/2”...... 36...... 6 will not separate! #RC9-3/4-HD...... Poly Core...... 9”...... 3/4”...... 36...... 6 #RC9-1-1/4-HD...... Poly Core...... 9”...... 1-1/4”...... 36...... 9 They WORK - Stiff cores that last! #RC7-3/8-HD...... Poly Core...... 7”...... 3/8”...... 36...... 5 How they are different... #RC4-3/8-HD...... Poly Core...... 4”...... 3/8”...... 48...... 4 Core made of 2 layers Core made from 4 layers #RC4-1/2-HD...... Poly Core...... 4”...... 1/2”...... 48...... 4 of polypropylene. of resin-infused paper, #RC4-3/4-HD...... Poly Core...... 4”...... 3/4”...... 48...... 4 baked & hardened. Nap is fused to the #RC3-3/8-HD...... Poly Core...... 3”...... 3/8”...... 48...... 3 core. Nap adhered with a #RC3-1/4-HD...... Poly Core...... 3”...... 1/4”...... 48...... 2 2-part epoxy. COMPETITIVELY PRICED!! Slight premium over the PHENOLIC CORE ROLLER COVERS 2-ply poly cores.

PHENOLIC CORE COVERS Cover WIdth Nap Length Qty/Ctn Lbs/Ctn USA MADE #RC18-3/8-PHEN...... Phenolic Core...... 18”...... 3/8”...... 24...... 8 Phenolic Core #RC18-3/4-PHEN...... Phenolic Core...... 18”...... 3/4”...... 24...... 10

#RC9-3/8-PHEN...... Phenolic Core...... 9”...... 3/8”...... 36...... 6 #RC9-1/2-PHEN...... Phenolic Core...... 9”...... 1/2”...... 36...... 6 #RC9-3/4-PHEN...... Phenolic Core...... 9”...... 3/4”...... 36...... 8

#RC4-3/8-PHEN...... Phenolic Core...... 4”...... 3/8”...... 48...... 4 THEY’RE BACK! #RC4-1/2-PHEN...... Phenolic Core...... 4”...... 1/2”...... 48...... 4

#RC3-3/8-PHEN...... Phenolic Core...... 3”...... 3/8”...... 48...... 3

CARPET NAP ROLLER COVERS

Preferred by many roofers for applying adhesives & coatings. USA MADE Carpet Nap 2-part epoxy on a phenolic core ensures holding the nap secure.

#RC18-C...... 18” carpet nap cover...... 12/ctn...... 6 lbs/ctn #RC9-C...... 9” carpet nap cover...... 12/ctn...... 4 lbs/ctn #RC4-C...... 4” carpet nap cover...... 36/ctn...... 4 lbs/ctn

COARSE EPOXY COATER (Looped Roller Covers)

Plastic looped material for applying coarse aggregate epoxy coating. 1-1/2” diameter synthetic core.

#RC18-LOOP...... 18” looped nap cover...... 12/ctn...... 5 lbs/ctn USA MADE #RC9-LOOP...... 9” looped nap cover...... 12/ctn...... 4 lbs/ctn ‘Looped’ Nap

PERFORATED CORE ROLLER COVERS

These perforated roller covers are for use with power equipment for applying liquids. The core is uniformly perforated, allowing the liquid to dispense through the nap. 3/8” nap.

#RC18-3/8PERF ...... 18” perforated core cover...... 12/ctn...... 4 lbs/ctn Perforated Core CALL FOR AVAILABILITY.

The Brush Man, LLC www.brushman.com [email protected] PAGE: 4 SHED-RESISTANT ROLLER COVERS

For the flooring contractors and other various coating jobs requiringminimum linting! #RC18-1/4LF...... 18” shed-resistant cover, 1/4” nap...... 24/ctn...... 7 lbs/ctn #RC18-3/8LF...... 18” shed-resistant cover, 3/8” nap...... 24/ctn...... 8 lbs/ctn #RC18-1/2LF...... 18” shed-resistant cover, 1/2” nap...... 24/ctn...... 8 lbs/ctn #RC18-3/4LF...... 18” shed-resistant cover, 3/4” nap...... 12/ctn...... 5 lbs/ctn

#RC9-1/4LF...... 9” shed-resistant cover, 1/4” nap...... 36/ctn...... 7 lbs/ctn #RC9-3/8LF...... 9” shed-resistant cover, 3/8” nap...... 36/ctn...... 7 lbs/ctn #RC9-1/2LF...... 9” shed-resistant cover, 1/2” nap...... 36/ctn...... 7 lbs/ctn

#RC4-3/8LF...... 4” shed-resistant cover, 3/8” nap...... 48/ctn...... 4 lbs/ctn #RC4-1/2LF...... 4” shed-resistant cover, 1/2” nap...... 48/ctn...... 5 lbs/ctn USA MADE High quality white fabric nap cover. #RC3-3/8LF...... 3” shed-resistant cover, 3/8” nap...... 48/ctn...... 4 lbs/ctn Shed-resistant. Great for use with clear coatings! USA MADE #RC18-M...... 18” mohair cover...... 12/ctn...... 4 lbs/ctn 24”, 30” and 36” shed-resistant #RC9-M...... 9” mohair cover...... 12/ctn...... 4 lbs/ctn covers are also available!

JUMBO 2-1/4” DIAMETER ROLLER COVERS

The synthetic core diameter is 2-1/4” for JUMBO 2-1/4” diameter core. maximum surface coverage. USA MADE #RC18-1/2J...... 18” JUMBO cover, 1/2” nap (Special Order)...... 12/ctn...... 7 lbs/ctn

#RC9-1/2J...... 9” JUMBO cover, 1/2 nap...... 12/ctn...... 4 lbs/ctn Use our #RC9-3/4J...... 9” JUMBO cover, 3/4 nap (Special Order)...... 12/ctn...... 4 lbs/ctn jumbo roller frames. #RC4-1/2J...... 4” JUMBO cover, 1/2” nap...... 24/ctn...... 4 lbs/ctn

MICROFIBER ROLLER COVERS

Solvent-resistant polypropylene core, non-shedding • Non-Shedding, Non-Matting fluffy luxurious nap. Holds more paint & delivers it • Easy to clean. with less friction. • No splatter.

#RC9-MICFBR-1/4...... 9” microfiber cover, 1/4” nap...... 25/ctn...... 3 lbs/ctn #RC9-MICFBR-3/8...... 9” microfiber cover, 3/8” nap...... 25/ctn...... 3 lbs/ctn USA MADE #RC9-MICFBR-9/16...... 9” microfiber cover, 9/16” nap...... 25/ctn...... 3 lbs/ctn #RC18-MICFBR-1/4...... 18” microfiber cover, 1/4” nap...... 12/ctn...... 4 lbs/ctn #RC18-MICFBR-3/8...... 18” microfiber cover, 3/8” nap...... 12/ctn...... 4 lbs/ctn NEW #RC18-MICFBR-9/16...... 18” microfiber cover, 9/16” nap...... 12/ctn...... 4 lbs/ctn

WHITE CHINA BRISTLE CHIP BRUSHES

White China Bristle (Plain Wood Sanded Handle) They are imported from Indonesia for best quality. These ‘one time use’ brushes stay in one piece.

Width Thickness Trim Std. Pack / (Master Ctn) Check our #PB1/2...... 1/2...... 1/4...... 1-1/2...... 36/ctn (864 / ctn)...... 2 lbs/ctn quality against #PB1...... 1...... 5/16...... 1-1/2...... 36/ctn (864 / ctn)...... 3 lbs/ctn others! #PB1-1/2...... 1-1/2...... 5/16...... 1-1/2...... 36/ctn (864 / ctn)...... 3 lbs/ctn #PB2...... 2...... 5/16...... 1-1/2...... 24/ctn (432 / ctn)...... 2 lbs/ctn #PB2HD Dbl Thick...... 2...... 1/2...... 2...... 12/ctn (144 / ctn)...... 2 lbs/ctn #PB2-1/2...... 2-1/2...... 3/8...... 1-1/2...... 24/ctn (432 / ctn)...... 3 lbs/ctn #PB3...... 3...... 3/8...... 1-1/2...... 24/ctn (432 / ctn)...... 4 lbs/ctn #PB3HD Dbl Thick...... 3...... 5/8...... 1-7/8...... 12/ctn (240 / ctn)...... 3 lbs/ctn #PB4...... 4...... 3/8...... 1-3/4...... 12/ctn (240 / ctn)...... 2 lbs/ctn #PB4HD Dbl Thick...... 4...... 11/16...... 2...... 12/ctn (144 / ctn)...... 3 lbs/ctn

4” EPDM ROOFING BRUSH

4” width applies adhesives quickly. Special 1-1/2” short trim - very stiff synthetic fill. Excellent for EPDM #PB4SP...... 4” roofers adhesive brush...... 12/ctn...... 3 lbs/ctn roof application.

The Brush Man, LLC www.brushman.com [email protected] PAGE: 5 18” PROFESSIONAL ROLLER FRAMES

18” steel-reinforced frame, 5-wire cage - won’t spread out We recommend our #HD60T (1-1/8” x 60”) handle. and lose the cover. Any size or type of handle can be #RF18HD used on the job site, no threads or drilled holes in handles needed. USA MADE

#RF18HD...... 18” steel-reinforced frame...... 3/ctn...... 11 lbs/ctn #RF18HD-CAGE...... Replacement cage for #RF18HD...... 1/ctn...... 1 lb/ctn

18” lightweight but durable roller frame, no cage, comes with end caps. #RF18LW Use any 15/16” or 1-1/8” diameter handle. Handle opening is adjustable.

#RF18LW...... For use with 18” regular covers...... 12/ctn... 14 lbs/ctn For most every job #RF18LW-END CAP...... Extra end caps for #RF18LW...... 48/ctn..... 2 lbs/ctn including roof coatings.

3”, 4”, 7” & 9” PROFESSIONAL ROLLER FRAMES

9” heavy duty frame, 5/16” stem for maximum strength, 5-wire cage. All frames 3” through 9” have reinforced #RF9HD...... 12/ctn...... 9 lbs/ctn threaded handle holes.

Same as #RF9HD but w/JUMBO .2-1/4” diameter cage for #RF9HD JUMBO ROLLER COVERS, 6-wire cage. #RF9HD-J...... 12/ctn...... 14 lbs/ctn #RF9HD-J 9” heavy duty cage frame, x-tra long 5/16” stem, .5-wire cage. #RF9HD-LN...... 24/ctn...... 24 lbs/ctn

9” heavy duty cage frame, wood handle, 5/16” stem, .5-wire cage. #RF9HD-W...... 12/ctn...... 10 lbs/ctn

#RF9HD-LN 9” regular duty cage frame, 1/4” stem. #RF9...... 24/ctn...... 14 lbs/ctn

7” heavy duty frame, 5/16” stem for maximum strength, 5-wire cage. #RF7HD...... 12/ctn...... 8 lbs/ctn #RF9HD-W #RF9 4” regular duty cage frame, 1/4” stem. #RF4...... 24/ctn...... 9 lbs/ctn NEW 4” JUMBO cage frame, 5/16” stem, 6-wire cage. #RF4-J...... 24/ctn...... 9 lbs/ctn

3” regular duty cage frame, 1/4” stem. #RF4 #RF3...... 24/ctn...... 8 lbs/ctn

PREMIUM EXTRA-HEAVY DUTY ROLLER FRAMES

Extra heavy duty roller frame! 5/16” thick extra long shank, 5-wire cage. Heavy duty nylon end caps. Reinforced threaded handle hole in the grip. #RF-9-PREMIUM...... 9”...... 12/ctn...... 13 lbs/ctn #RF-4-PREMIUM...... 4”...... 12/ctn...... 9 lbs/ctn

9” NON-SLIP HEAVY DUTY ROLLER FRAME

9” NON-SLIP heavy duty roller frame. Has special end cap that prevents ‘walking’ by the cover. 5/16” shank, 5-wire cage, rubberized handle for better grip. Reinforced threadedhandle hole in the grip. #RF9HD-NO-SLIP...... 24/ctn...... 23 lbs/ctn

The Brush Man, LLC www.brushman.com [email protected] PAGE: 6 SHED-RESISTANT MINI ROLLER COVES & MINI FRAMES Mini Roller Covers Shed-Resistant All mini covers are shed-resistant and 2 covers per pack USA MADE with 24 packs per carton (48 covers/ctn).

#RCM6-1/2-1/4LF...... 6-1/2” cover, 1/4” nap...... 24 packs/ctn (48 covers)...... 4 lbs/ctn #RCM6-1/2-3/8LF...... 6-1/2” cover, 3/8” nap...... 24 packs/ctn (48 covers)...... 4 lbs/ctn #RCM6-1/2-1/2LF...... 6-1/2” cover, 1/2” nap...... 24 packs/ctn (48 covers)...... 4 lbs/ctn

#RCM4-3/8LF...... 4” cover, 3/8” nap...... 24 packs/ctn (48 covers)...... 3 lbs/ctn

Mini Roller Frames #RFM6-1/2-24...... 24” long frame for 6-1/2” mini cover...... 12/ctn...... 7 lbs/ctn #RFM4-16...... 16” long frame for 4” mini cover...... 12/ctn...... 4 lbs/ctn

ROOFERS PITCH HOOD

• Breathable dacron material protects workers from pitch fumes! USA MADE Eliminates skin • Complete Face & Neck Coverage • Lightweight! irritation and • Washable! pitch burns. • Will not stretch out! • Use over and over again! #PITCH HOOD-NYLN

#PITCH HOOD-NYLN...... 10/ctn...... 2 lbs/ctn

FOR ADDED SAFETY:

Fogless lens safety goggle, indirect venting. #GOGGLE 300...... 12/ctn...... 3 lbs/ctn

9-PLY PROTECTIVE BARRIER GEL & AFTER-WORK SKIN CREAM

Protects the skin from irritation & pitch burns! A must for roofers! It should also USA MADE be applied each day just before work to make clean-up later a real breeze. No more digging embedded tar, grease, oil and dirt out of your skin. Try this gel for a couple of days and you will always use it every day on the job site.

#PITCH GEL...... 24 tubes / ctn...... 10 lbs/ctn Contains: Water, glycerin, sodium carboxymethyl, cellulose gums, methylparaben.

An ‘after wash-up” cream to protect, soothe and refresh skin dried by USA MADE environmental exposure and by harsh cleaners. Rub this cream into problem areas to ease the discomfort of rough or dry, chapped skin.

#AFTER CREAM...... 24 tubes / ctn...... 8 lbs/ctn Contains: Water, stearic acid, lanolin, camphor, mineral oil, glyceryl monostearate, triethanolamine, cetyl alcohol, menthol. MAKE-A-CLAMP KITS

Make any size stainless steel clamp you need! Stainless steel banding with adjustable fasteners & band splices. Band Length Fasteners Band Splices #CLAMP KIT 50...... 50’...... 10...... 10...... 1 kit...... 2.5 lbs/kit #CLAMP KIT 100...... 100’...... 25...... 10...... 1 kit...... 6 lbs/kit USA MADE #CLAMP KIT 50-50...... 50’...... 50...... 10...... 1 kit...... 3 lbs/kit

FOR EXTRA FASTENERS: #CLAMP KIT FASTN...... 10 Make-A-Clamp fasteners...... 1 kit...... 1 lbs/kit (Includes band splices.)

INDIVIDUAL BAND CLAMPS General purpose industrial clamps. High strength Excceds all SAE requirements. 1/2” band. Stainless hex screw. 10 clamps/pack. Min Diameter Max Diameter NEW #CLAMP-BAND-1...... 9/16”...... 1-1/16”...... 10/ctn...... 11 lbs/ctn #CLAMP-BAND-2...... 1-1/16”...... 2”...... 10/ctn...... 11 lbs/ctn #CLAMP-BAND-3...... 2-1/16”...... 3”...... 10/ctn...... 11 lbs/ctn #CLAMP-BAND-4...... 3-1/16”...... 4”...... 10/ctn...... 11 lbs/ctn

The Brush Man, LLC www.brushman.com [email protected] PAGE: 7 SPADES - ROOFERS

• Fulcrums Welded Around Perimter - Maximum Reinforcement Where It Is Needed! • Premium Ash Handle • Handle Dual-Riveted In Socket Serrated & Smooth Edge Spades With WITH Fulcrum: Fulcrum SERRATED Tear-Off Spade - Long Fiberglass Handle #SPADE-3-LFG-S-I...... 3/pack...... 22 lbs/pack SMOOTH Tear-Off Spade - Long Fiberglass Handle Our exclusive line of #SPADE-3-LFG-I...... 3/pack...... 21 lbs/pack premium scoops & spades! SERRATED Tear-Off Spade - Long Steel Handle #SPADE-3-LST-S-I...... 3/pack...... 26 lbs/pack DESIGNED SMOOTH Tear-Off Spade - Long Steel Handle BY #SPADE-3-LSTL-I...... 3/pack...... 20 lbs/pack CONTRACTORS, SMOOTH Tear-Off Spade - Long Wood Handle FOR ...... 3/pack...... 13 lbs/pack #SPADE-3-LW-I CONTRACTORS!

Smooth Edge WITHOUT Fulcrum: Spade Without Fulcrum SMOOTH Tear-Off Spade - Long Wood Handle, No Fulcrum Stainless Steel/Wood #SPADE-LW-I...... 3/pack...... 13 lbs/pack D-Grip Design Now rated for heavy duty commercial & ALUMINUM SCOOPS contractor use!

#12 Aluminum Scoop - D-Grip Handle • Stainless Steel/Wood D-Grip Design • Dual-Riveted Socket Premium Northern • Premium Ash Handle Ash Handles Maximizes #SCOOP-AL-DW12-I...... 3/pack...... 16 lbs/pack strength & durability! STEEL SCOOPS Fulcrums Welded Around #8 Steel Scoop Perimeter • Stainless Steel/Wood D-Grip Design Maxiumum reinforcement • Dual-Riveted Socket where it is needed most! • Premium Ash Handle Closed Back Shovel #SCOOP-ST-DW8-I.....D-Grip Handle...... 3/pack...... 20 lbs/pack Blades Reduces soil build-up #SCOOP-ST-LW8-I.....Long Wood Handle...... 3/pack...... 23 lbs/pack & adds overall strength!

#2 Steel Scoop Extra Thick 14-Gauge #SCOOP-ST-DW2-I.....Poly D-Grip Handle...... 3/pack...... 20 lbs/pack Steel Blades Maximum toughness!

COAL SHOVELS All Sockets Dual #2 Coal Shovel Riveted Significantly reduces • Stainless Steel/Wood D-Grip Design handle breakage! • Dual-Riveted Socket • Premium Ash Handle

#SHOVEL-CO-DW2-I...... D-Grip Handle...... 3/pack...... 16 lbs/pack #SHOVEL-CO-LW2-I...... Long Wood Handle...... 3/pack...... 18 lbs/pack

ABS POLY SCOOP

#12 ABS Poly Grain Scoop • Handle Dual-Riveted In Extra Long Socket • Heavy Duty Poly Grip - Dual Riveted • Premium Ash Handle

#SCOOP-ABS-DW12...... 3/pack...... 24 lbs/pack

The Brush Man, LLC www.brushman.com [email protected] PAGE: 8 ROUND & SQUARE POINT SHOVELS

• Dual-Riveted Socket • Premium Ash Handle • Extra-Thick 14-Gauge Steel • Closed-back shovel blades - Reduces soil build-up & adds overall strength!

Size 2 Round Point Shovel - Long Wood Handle #SHOVEL-RD-LW2-I...... 3/pack...... 16 lbs/pack Size 2 Square Point Shovel - Long Wood Handle #SHOVEL-SQ-LW-I...... 3/pack...... 18 lbs/pack

AXE & MATTOCK

Single bit axe, hardwood handle, 3-1/2 lb. #AXE-W-I...... 4/pack...... 19 lbs/pack

Head only - 5 lb cutter and mattock. #MATTOCK-5...... 4/pack...... 20 lbs/pack

Handle only for #MATTOCK-5. #MATTOCK-HANDLE...... 4/pack...... 5 lbs/pack

WRECKING BAR

#WRECKING-15-I...... 15” wrecking bar...... 6/pack...... 9 lbs/pack

SPUD BAR (SPECIAL ORDER)

72” spud bar, fine polished steel, 1” diameter. #SPUD-BAR-I...... 4/pack...... 68 lbs/pack

SHINGLE REMOVER WITH REPLACEABLE STEEL BLADE

47-1/2” shingle remover. Fiberglass handle with poly ‘D’ Grip, replaceable serrated steel blade. #SHOVEL-SHING-FG...... 3/pack...... 16 lbs/pack

FORGED SPADING FORK

Forged spading fork. 29” wood handle with oly ‘D’-grip. #PITCH-FORK-4WPD...... 3/pack...... 18 lbs/pack

In addition to our line of Great Dane Tools, The Brush Man, LLC, is partnering with Ames. Tell us what you need and we will stock it for you!

The Brush Man, LLC www.brushman.com [email protected] PAGE: 9 FLOOR SQUEEGEES Steel-back floor squeegee with a 1/4” x 2” black rubber blade. Steel handle socket USA MADE that won’t crack or let go of the handle. No more split handle ends from having to use a nail to hold the handle into the socket. #FS318...... 18” straight steel channel...... 6/ctn...... 11 lbs/ctn #FS324...... 24” straight steel channel...... 6/ctn...... 14 lbs/ctn #FS330...... 30” straight steel channel...... 6/ctn...... 17 lbs/ctn #FS336...... 36” straight steel channel...... 6/ctn...... 20 lbs/ctn #FS348...... 48” straight steel channel...... 6/ctn...... 26 lbs/ctn

STEEL HANDLE #FS324C...... 24” curved steel channel...... 6/ctn...... 15 lbs/ctn SOCKET #FS330C...... 30” curved steel channel...... 6/ctn...... 18 lbs/ctn #FS336C...... 36” curved steel channel...... 6/ctn...... 21 lbs/ctn No more loose handles or cracked handle sockets. Uses 1-1/8” diameter tapered end handles - sold separately. SERRATED-EDGE NON-MARKING GRAY RUBBER FLOOR SQUEEGEES

Steel-back floor squeegee. Spreads material uniformly. Stiff, gray, STEEL HANDLE non-marking 1/4” x 2” serrated rubber blade. Steel handle socket. SOCKET

Squeegee Width Serration Width USA MADE #FS18SE-1/8...... 18”...... 1/8”...... 6/ctn...... 12 lbs/ctn #FS18SE-3/16...... 18”...... 3/16”...... 6/ctn...... 12 lbs/ctn

#FS18SE-1/4...... 18”...... 1/4”...... 6/ctn...... 12 lbs/ctn ‘’Straight’ #FS18SE-3/8...... 18”...... 3/8”...... 6/ctn...... 12 lbs/ctn #FS24SE-1/8...... 24”...... 1/8”...... 6/ctn...... 15 lbs/ctn Serrated Blade STEEL #FS24SE-3/16...... 24”...... 3/16”...... 6/ctn...... 15 lbs/ctn HANDLE #FS24SE-1/4...... 24”...... 1/4”...... 6/ctn...... 15 lbs/ctn SOCKET USA MADE #FS24SE-3/8...... 24”...... 3/8”...... 6/ctn...... 15 lbs/ctn #FS36SE-3/16...... 36”...... 3/16”...... 6/ctn...... 22 lbs/ctn ‘’Curved End’ #FS24CSE-3/16 .....24” curved end squeegee.....6/ctn...... 15 lbs/ctn with 3/16” serrations.

Uses 1-1/8” diameter tapered end handles - sold separately.

SMOOTH-EDGE NON-MARKING GRAY RUBBER FLOOR SQUEEGEES

Steel-back floor squeegee, stiff, gray, non-marking 1/4” x 2” rubber blade. Steel handle socket. STEEL HANDLE #FS318G...... 18” non-marking blade...... 6/ctn...... 12 lbs/ctn USA MADE SOCKET #FS324G...... 24” non-marking blade...... 6/ctn...... 15 lbs/ctn #FS336G...... 36” non-marking blade...... 6/ctn...... 22 lbs/ctn

Uses 1-1/8” diameter tapered end handles - sold separately. Smooth Blade

SPONGE BLADE NON-MARKING GRAY RUBBER FLOOR SQUEEGEES

Double sponge gray non-marking floor squeegee mounted on our steel channel USA MADE STEEL with steel handle socket. Gets floors drier but wears out quicker than solid rubber! HANDLE SOCKET #FS318-SPONGE....18” double sponge blade..... 4/ctn...... 7 lbs/ctn #FS324-SPONGE....24” double sponge blade..... 4/ctn...... 9 lbs/ctn #FS330-SPONGE....30” double sponge blade..... 4/ctn...... 10 lbs/ctn #FS336-SPONGE....36” double sponge blade..... 4/ctn...... 13 lbs/ctn

Uses 1-1/8” diameter tapered end handles - sold separately.

NOTCHED BLACK RUBBER COATINGS SQUEEGEE STEEL NEW 24” straight coatings squeegee. Steel HANDLE handle socket,stiff black rubber blade. SOCKET Notches are 1/4” wide x 3/16” deep. USA MADE #FS24SE-COATINGS...... 6/ctn...... 14 lbs/ctn

The Brush Man, LLC www.brushman.com [email protected] PAGE: 10 WOOD-BACK FLOOR SQUEEGEES

Good quality wood-back applicator for small jobs. Double your value by using both sides. Non-sparking. Threaded handle hole. For all types of uses. #FSWB18-2...... 18” smooth blade, 3/16” thick...... 12/ctn...... 17 lbs/ctn #FSWB24-2...... 24” smooth blade, 3/16” thick (Special Order)..... 12/ctn...... 20 lbs/ctn

#FSWB18N-2...... 18” notched blade, 1/4” x 1/4”...... 12/ctn...... 17 lbs/ctn #FSWB24N-2...... 24” notched blade, 1/4” x 1/4”...... 12/ctn...... 19 lbs/ctn Double sided for USA MADE double value Order threaded end handles - sold separately.

DRIVEWAY & COATINGS APPLICATORS

Economical, disposable applicators for driveway dressings, asphalt USA MADE sealers, roof coatings or other coating uses. Wood block, threaded handle hole, rubber squeegee. #DA12-PALM...... 12”, Palmyra fill, 2” trim...... 12/ctn...... 11 lbs/ctn #DA18-PALM...... 18”, Palmyra fill, 2” trim...... 12/ctn...... 18 lbs/ctn Great for various coatings.

RECOMMENDED HANDLE: 15/16” x 60” metal threaded wood handle #H60MT...... 12/ctn...... 15 lbs/ctn

WINDOW SQUEEGEES

Economical squeegees for multi-purpose use. U-shaped galvanized steel channel riveted to a plated steel handle. A split-end red non-marking rubber clinched in the frame. USA MADE #WSQ12...... 12” window squeegee...... 12/ctn...... 5 lbs/ctn #WSQ14...... 14” window squeegee (Special Order)...... 12/ctn...... 5 lbs/ctn #WSQ12 #WSQ16...... 16” window squeegee...... 12/ctn...... 6 lbs/ctn #WSQ18...... 18” window squeegee (Special Order)...... 12/ctn...... 7 lbs/ctn

#WSQ18HD...... 18” heavy duty window squeegee...... 12/ctn...... 8 lbs/ctn USA MADE #WSQ18HD (Special Order)

Order #H48T or #H60T handles - sold separately.

CONCRETE FINISHING BRUSH USA MADE Clear lacquered hardwood block. 18” - 48” have threaded handle #CF12 hole and two holes for use with bull float brackets.

#CF-12-HH...... 12” finishing brush,horsehair fill...... 12/ctn...... 8 lbs/ctn #CF-24-HH...... 24” finishing brush,horsehair fill(Special Order)...... 6/ctn...... 13 lbs/ctn #CF-36-HH...... 36” finishing brush,horsehair fill(Special Order)...... 6/ctn...... 16 lbs/ctn

#CF18...... 18” finishing brush,black poly fill...... 6/ctn...... 9 lbs/ctn #CF24...... 24” finishing brush,black poly fill...... 6/ctn...... 13 lbs/ctn #CF36...... 36” finishing brush,black poly fill...... 6/ctn...... 16 lbs/ctn #CF18 #CF48...... 48” finishing brush,black poly fill...... 6/ctn...... 16 lbs/ctn

Adjustable threaded handle socket concrete finishing brush. 3” trim, fine synthetic fill.Adjusts to any angle. #CF-ADJ-30...... 30” block...... 2/ctn...... 4 lbs/ctn #CF-ADJ-36...... 36” block...... 2/ctn...... 5 lbs/ctn USA MADE Order threaded end handles - sold separately.

The Brush Man, LLC www.brushman.com [email protected] PAGE: 11 RECOMMENDED FLOOR SWEEPS

These three types of floor brushes are all you will need to satisfy any sweeping requirement! “Fine” for dust areas, “Coarse” for all outside areas and oily or rough inside sweeping and “All-Purpose” for those who want one sweep for both fine & coarse. You might buy cheaper floor sweeps but not better performance! Fine Sweeps Width Qty/Ctn Lbs/Ctn Fine synthetic center, horsehair and synthetic border, 3” trim. #FB218P...... 18”...... 12...... 21 No matting or laying-over of bristles. Our best fine sweep for #FB224P...... 24”...... 12...... 28 smooth floors. #FB230P...... 30”...... 12...... 40 #FB236P...... 36”...... 12...... 45

Gray flagged (split tips) synthetic fill, 3” trim. Bristles won’t lay #FB918...... 18”...... 12...... 22 over. Not recommended around wet areas or sweeping com- #FB924...... 24”...... 12...... 28 pound. The split ends will really load up. #FB930...... 30”...... 12...... 35 #FB936...... 36”...... 12...... 46

All-Purpose Sweeps Width Qty/Ctn Lbs/Ctn Medium stiff synthetic center, flagged synthetic border, 3” trim. #FB2918...... 18”...... 12...... 22 All-purpose brush sweeps fine dust yet will sweep heavier de- #FB2924...... 24”...... 12...... 32 bris effectively. No matting or curling. Can be used just about #FB2930...... 30”...... 12...... 41 anywhere. #FB2936...... 36”...... 12...... 50

Coarse Sweeps Width Qty/Ctn Lbs/Ctn Stiff synthetic fill, 3” trim for all coarse or outside sweeping. #FB1618S...... 18”...... 12...... 24 No matting or laying-over of bristles. Use where dust is not a #FB1624S...... 24”...... 12...... 35 concern. Our best coarse sweep. (Grease - oil - solvents do #FB1630S...... 30”...... 12...... 43 not affect this broom.) #FB1636S...... 36”...... 12...... 54

Order 15/16” or 1-1/8” diameter metal threaded handles - sold separately. All sweeps 24” or larger should always use our #HB-M106 .

OTHER FINE, MEDIUM & COARSE FLOOR SWEEPS

Width Qty/Ctn Lbs/Ctn Pure black horsehair, 3” trim. Should be cleaned and hung USA MADE up after each use. For very fine sweeping by professionals. #FB618...... 18”...... 12...... 25 Also used for concrete finishing. Special order. Found on various bids and #FB624...... 24”...... 12...... 32 price requests.

Synthetic fill, 3” trim. Fine-medium sweep. Many times better value than the #FB118P...... 18”...... 12...... 20 tampicos listed below. Resists laying over or matting. Most conditions do not #FB124P...... 24”...... 12...... 26 affect it. A low price sweep but it performs well. #FB136P...... 36”...... 12...... 44

Black tampico fill, full 3” trim. Matts and lays over quickly and permanently. #FB118...... 18”...... 12...... 21 Oil-dry, sweeping compound or water will ruin it. Spend a few cents more, #FB124...... 24”...... 12...... 26 initially, and get the FB200P series listed previously. USA MADE #FB136...... 36”...... 12...... 46

Wire center with tampico fill, 3” trim. Normally restricted USA MADE #FB818T...... 18”...... 12...... 27 to heavy foundry dust because it does not flip the fine #FB824T...... 24”...... 12...... 35 dust. The tampico fiber will matt but the fiber can’t lay over - the recessed wire center holds it up. Not a good Used years ago for sweeping foundry dust before vac systems. The recessed wire center prevents laying over of the bristles. value! Special order.

Oil-treated palmyra fill, 4” trim. Low initial cost Width Qty/Ctn Lbs/Ctn but low performance makes it costly, overall. #FB1218...... 18”...... 12...... 20 Bristles lay over, matt & shed. Mostly used by #FB1224...... 24”...... 12...... 28 roofers for use on felt. It’s time to use better sweeps!! 30” & 36” have threaded & tapered handle hole and include #HB-M106 handle brace. Popular before synthetics were available. #FBR1230...... 30”...... 12...... 48 #FBR1236...... 36”...... 12...... 55

Order 15/16” or 1-1/8” diameter metal threaded handles - sold separately.

All sweeps 24” or larger should always use our #HB-M106 brace.

The Brush Man, LLC www.brushman.com [email protected] PAGE: 12 ROOFERS FELT BROOMS

Oil-treated palmyra fill, 4” trim. Wood block has threaded & tapered handle holes. Brace Our heavy duty steel handle brace is included to insure no handle problems! No more Included threaded handles cracking or breaking off. #FBR1230...... 30” hardwood block w/brace included...... 12/ctn...... 48 lbs/ctn #FBR1236...... 36” hardwood block w/brace included...... 12/ctn...... 55 lbs/ctn

Very popular for roofers to follow felt - not much value for sweeping. Threaded & tapered handle Order 1-1/8” diameter tapered or threaded end hole! handles - sold separately. ROOFERS BRUSHES

3 & 4 knot roofing brushes - 4-1/4” trim,tampico fill. #R3KT #R3KT...... 3 knot roof brush. Tapered handle hole...... 12/ctn...... 12 lbs/ctn #R4KT...... 4 knot roof brush. Tapered handle hole...... 12/ctn...... 17 lbs/ctn

Use #HD60T - 1-1/8” diameter tapered end handles - sold separately.

Economy roofing brush, 7” hardwood block, white tampico fill, 2-1/4” trim. #RWT-7TT #RWT-7TT...... Tapered & threaded handle holes...... 12/ctn...... 6 lbs/ctn

10” roofing brush, hardwood block, white tampico fill, 2” trim. #RWT-10SP...... Tapered handle holes...... 12/ctn...... 12 lbs/ctn #RWT-10SP

Order 15/16” or 1-1/8” diameter tapered or threaded end handles - sold separately.

ROOFERS & CONTRACTORS UPRIGHT BROOMS

Outlasts & outperforms corn brooms many times over. Works great on roof gravel. USA MADE #500 Metal-cased stiff synthetic fill upright broom. 1-1/8” diameter handle. A great broom.

#500...... Metal-cased upright. (No Chisel)...... 6/ctn...... 18 lbs/ctn

Use on every job imaginable - guaranteed value or Sweep grease & oil, scrub with it, sweep snow, return, used or new, for total credit. Try them! clean cracks & corners, rugs, sweep gravel on roofs - you name it, it will sweep it!

Same as #500 but with a heat-treated chisel point. For road crews for fixing pot holes or USA MADE other chipping jobs. (Used by railroads for years to chop & sweep ice from switches.)

#505...... 6/ctn...... 20 lbs/ctn #505 - Chisel Point

MAGNETIC HAMMER & ‘SMART’ HATCHET

For the installation of roof dry-in underlayments, house wrap, sheet • Heavy Duty Magnet metal & drywall. To be used with NEW • Slip-Resistant Handle plastic cap nails, metal cap nails, • Angled Shaft - Reduces vibration roofing nails, and drywall nails. & prevents hand injury. #MAGNET-HAMMER...... 6/ctn...... 12 lbs/ctn • “Easy Grab, Easy Stow’ Holder Included

The "Smart Hatchet" is the world's first magnetic hatchet! • All Steel Contractor Grade Hammer/Hatchet Combination For the installation of stucco, drywall, roof shingles, roof • Heavy Duty Magnet dry-in underlayments, house wrap, and • Slip-Resistant Handle drywall. To be used with plastic cap nails, • Easy Claw for quick nail removal. metal cap nails, roofing nails, stubbie NEW • Hatchet with guides. nails, and drywall nails. • “Easy Grab, Easy Stow’ Holder Included #MAGNET-HATCHET...... 12/ctn...... 36 lbs/ctn

The Brush Man, LLC www.brushman.com [email protected] PAGE: 13 STREET BROOMS OUR VERY BEST STREET BROOM - FOR EVERY JOB! GUARANTEED SATISFACTION! Try them - your customers will thank you!

Stiff white synthetic street broom. No shedding USA MADE or matting. Outlasts and outperforms every other street broom on the market. #ST7166 ...... 16” street broom ...... 6/ctn...... 17 lbs/ctn “A test in the field #ST9245 ...... 24” street broom ...... 6/ctn...... 22 lbs/ctn is all it takes!”

The stiff 4” trim is the secret to the great performance!

OTHER 16” STREET BROOMS...

African bass, 6-1/4” trim, Sheds, matts, not much sweeping value. Use our #ST7166 that costs less yet has much greater performance. #ST2165 #ST2165...... Used for bids 50 years ago - still...... 6/ctn...... 17 lbs/ctn USA MADE shows up on bids.

Palmyra stalk, 6-1/4” trim. Less expensive than African bass but the same poor quality as African bass. #ST4165 #ST4165...... Another bid broom. Sheds...... 6/ctn...... 18 lbs/ctn

Synthetic mix, 5-1/4” trim, heavy fill, no shedding, matting or breaking off. USA MADE Costs more than #ST7166 but has less performance! Buy the #ST7166 instead. #ST9165...... Better than the fiber street brooms...... 6/ctn...... 16 lbs/ctn but not stiff enough. #ST9165

Orange poly, 5-1/4” fill for the “orange bristle” buyers. USA MADE #ST16...... Pay less & get more with our #ST7166...... 6/ctn...... 15 lbs/ctn which performs better - guaranteed!

#ST16 All street brooms above use our #HD60T 1-1/8” diameter tapered end handles - sold separately.

WIRE STREET BROOM 16” wire street broom, 5 rows, .014 gauge tempered round steel wire, 3-3/4” trim, tapered handle hole. Cuts caked debris. Used around ‘hot’ areas. #STRW16...... 6/ctn...... 22 lbs/ctn USA MADE

Use #HD60T - 1-1/8” diameter tapered end handles - sold separately.

HANDLE ADAPTER

Solid Nylon handle adapter. Converts threaded handles to tapered. Expensive but will not break. #HTPA-NYLON...... Nylon handle adapter...... 1 each

BOOT & SHOE BRUSH

Boot & shoe cleaner brush. #BOOT & SHOE...... 1/ctn...... 2 lbs/ctn

The Brush Man, LLC www.brushman.com [email protected] PAGE: 14 FINEST QUALITY #1 GRADE LACQUERED HARDWOOD HANDLES Cast Metal Threaded #1 Grade Hardwood #H48MT...... 15/16” x 48” metal threaded handle...... 12/ctn...... 13 lbs/ctn #H60MT #H60MT...... 15/16” x 60” metal threaded handle...... 12/ctn...... 15 lbs/ctn #H72MT...... 15/16” x 72” metal threaded handle...... 12/ctn...... 17 lbs/ctn #HD60MT #HD60MT...... 1-1/8” x 60” metal threaded handle...... 12/ctn...... 22 lbs/ctn Tapered End #1 Grade Hardwood

...... 12/ctn...... 13 lbs/ctn #H48T 15/16” x 48” tapered end handle #H60T #H60T...... 15/16” x 60” tapered end handle...... 12/ctn...... 15 lbs/ctn #HD54T...... 1-1/8” x 54” tapered end handle...... 12/ctn...... 19 lbs/ctn #HD60T #HD60T...... 1-1/8” x 60” tapered end handle...... 12/ctn...... 20 lbs/ctn #HD72T...... 1-1/8” x 72” tapered end handle...... 12/ctn...... 24 lbs/ctn

Wood Threaded #1 Grade Hardwood ...... 12/ctn...... 13 lbs/ctn #H48WT 15/16” x 48” wood threaded handle #H60WT #H54WT...... 15/16” x 54” wood threaded handle...... 12/ctn...... 14 lbs/ctn ...... 12/ctn...... 15 lbs/ctn #H60WT 15/16” x 60” wood threaded handle #HD60WT #HD60WT...... 1-1/8” x 60” wood threaded handle...... 12/ctn...... 20 lbs/ctn #HD72WT...... 1-1/8” x 72” wood threaded handle...... 12/ctn...... 24 lbs/ctn 14” LACQUERED HARDWOOD HANDLES

Same quality lacquered hardwood as above but only 14”.

#HH14WT...... 15/16” x 14” wood threaded handle...... 24/ctn...... 5 lbs/ctn #HH14T-1...... 1” x 14” tapered end handle...... 24/ctn...... 5 lbs/ctn

FIBERGLASS HANDLE - SHOCK-ABSORBING THREADED TIP

This fiberglass handle should replace every other threaded handle on the market. The ‘space-age’ synthetic threaded tip will absorb shock that breaks other tips. It has two nylon rivets attaching the threaded tip to the handle. Outlasts wood threaded or metal threaded wood handles many times over! USA MADE #H60FG...... 1” x 60” fiberglass handle w/polymeric threaded tip...... 12/ctn.....16 lbs/ctn IT ABSORBS SHOCK! ALUMINUM HANDLE WITH THREADED TIP

54” aluminum handle with plastic threaded tip. USA MADE

#H54AL-PT...... 12/ctn...... 10 lbs/ctn

EXTENSTION HANDLES - HEAVY DUTY

Fiberglass outside section, for safety, aluminum inside sections to maintain shape. #H48AG...... 4’ to 8’ (2 sections) extension handle...... 6/ctn...... 13 lbs/ctn #H612AG...... 6’ to 12’ (2 sections) extension handle...... 6/ctn...... 19 lbs/ctn No collars to twist & turn. #H816AG...... 8’ to 16’ (2 sections) extension handle...... 6/ctn...... 24 lbs/ctn

HANDLE BRACES

Steel handle brace. A must for sweeps 24” or larger. Handles can’t turn, go #HB-M106 sideways or come out. Saves many dollars on broken handle threads & thrown away floor sweeps yet costs very little! Oversize wood screws included. USA MADE No floor brush should #HB-M106...... Large steel handle brace...... 12/ctn...... 5 lbs/ctn be without one!

U-bolt style handle brace. It mainly keeps the handle from turning. The #HB-M106 above is still the best value. #HB-M102...... 1 each USA MADE #HB-M102

The Brush Man, LLC www.brushman.com [email protected] PAGE: 15 CAR/TRUCK WASH BRUSHES

These brushes perform better and last longer than others we have tested. They hold a volume of water. Perfect for highly polished surfaces, trucks, vans, boats, siding, windows and wall washing.

Wash brush, 9” x 2-3/4” synthetic block with one threaded hole. #TWB28 Vinyl bumper encircles block. Green Nylex flagged synthetic fill, USA MADE 2-1/2” trim. Fountain style. #TWB28...... 6/ctn...... 9 lbs/ctn

Wash brush, 10” dual position synthetic block with threaded handle hole. Gray flagged synthetic fill, 2” trim,acid-resistant . USA MADE Fountain style. #TWB10 #TWB10...... 1/ctn...... 2 lbs/ctn DUAL POSITION

Wash brush, 9-1/2” x 2-3/4” synthetic block, one threaded handle hole. Yellow flagged synthetic fill, 2-1/2” trim. Fountain style. The flagged synthetic holds much liquid yet releases the dirt. The best buy of the three! USA MADE #TWB9-1/2 #TWB9-1/2....RECOMMENDED - BEST BUY...... 12/ctn...... 12 lbs/ctn BEST BUY

Wash brush, 9” x 2-3/4” synthetic block with one threaded hole. Vinyl bumper encircles block. Gray/silver polypropylene fill, 2-1/2” trim. USA MADE Fountain style. #TWB9-1/2A... (Stiffer Bristle than #TWB28)...... 12/ctn...... 13 lbs/ctn NEW All above wash brushes use threaded #TWB9-1/2A end handles - sold separately. DECK SCRUBS

10” wood block, palmyra fill, 2” trim, one tapered USA MADE #DSF10-TT hole & one threaded hole. #DSF10-TT...... 12/ctn...... 12 lbs/ctn

10” wood block, stiff synthetic fill, 2-1/2” trim, USA MADE #DSP10-TT one threaded & one tapered handle hole. #DSP10-TT...... 12/ctn...... 13 lbs/ctn

10” dual position synthetic block, stiff synthetic USA MADE fill, 1-3/4” trim, threaded handle hole. DUAL POSITION ...... 1/ctn...... 2 lbs/ctn #DSPM10 #DSPM10

12” carbon steel wire deck scrub, .014 gauge. Staple set in smooth sanded hardwood block with one tapered and one USA MADE tapered handle hole. 2” trim. #DSM412S...... 12/ctn...... 22 lbs/ctn #DSM412S

Order tapered and/or threaded end handles - sold separately. ACID SCRUB BRUSHES

8-1/4” wood block, white tampico fill, 1-1/4” trim. USA MADE #AST-8...... Tapered handle hole...... 12/ctn...... 8 lbs/ctn #AST-8TH...... Threaded handle hole...... 12/ctn...... 8 lbs/ctn

Order tapered and/or threaded end handles - sold separately.

BOWL BRUSH

14-1/2” bowl brush, plastic handle, 1” trim, polyproylene fill. No wires.

#BB15...... 48/ctn...... 11 lbs/ctn USA MADE NEW

The Brush Man, LLC www.brushman.com [email protected] PAGE: 16 MASONRY BRUSHES

Masonry brush, 6-1/2” x 2” wood block, white tampico #M187 fill, red handle, 5 rows, 4” trim. Most popular of all USA MADE #M587 masonry brushes. #M186 #M187...... 12/ctn...... 10 lbs/ctn #M185

Masonry brush, 6” hardwood block, white tampico USA MADE fill, 2 rows, 3” trim. #M587...... 12/ctn...... 6 lbs/ctn

Masonry brush, 6-3/8” x 1-3/4” wood block, white tampico fill, 6-1/2” handle attached, NEW USA MADE 5 rows, 3-1/2” trim. #M186...... 12/ctn...... 5 lbs/ctn

Masonry brush, 4-7/8” x 1-3/4” wood block, white tampico fill, USA MADE 5-1/2” handle attached, 4 rows, 3” trim. Popular for use with 5 gallon pails. #M185...... 12/ctn...... 5 lbs/ctn

Masonry brush, 6” x 3/4” foam plastic block with hang clip, almond USA MADE polypropylene fill, 6-1/2” handle, 2 rows, 3-1/2” trim. #M586P #M586P...... 12/ctn...... 6 lbs/ctn

WINDOW BRUSHES #WB8T 8” window brush, hardwood block, white tampico fill, 2-1/2” trim, USA MADE tapered hanle hole. #WB8T...... 12/ctn...... 11 lbs/ctn

4-1/2” diameter round window brush, heavy fill - grey double flagged plastic, plastic block, threaded handle holes, fountain style. NEW #WB4-1/4...... 12/ctn...... 11 lbs/ctn

#WB4-1/2

PAPERHANGER’S SMOOTHER BRUSH

12” smoother brush, hardwood block, white tampico fill, USA MADE 2 rows, 2” trim. #M512...... 12/ctn...... 8 lbs/ctn

HAND SCRUB

Molded synthetic block with ‘steam iron’ style handle for E-Z hold. USA MADE Polypropylene fill, 1-1/8” trim. Used everywhere! #HS6...... 12/ctn...... 5 lbs/ctn

DRAFTSMAN BRUSH

14” draftsman brush, gray horsehair fill, USA MADE 1 row, 2-1/2” trim. #DRAFTSMAN...... 6/ctn...... 2 lbs/ctn

RADIATOR BRUSH

36” radiator brush, poly handle, .008 nylon fill. USA MADE #RB36WB...... 12/ctn...... 6 lbs/ctn

The Brush Man, LLC www.brushman.com [email protected] PAGE: 17 COUNTER BRUSHES

8” counter brush, horsehair/synth blend fill, 2-1/2” trim, forfine debris. #CB86 #CB86...... BEST FOR FINE USE...... USA MADE 12/ctn...... 8 lbs/ctn #CB82 8” counter brush, silver flagged synthetic fill, 2-1/2” trim, forfine debris. #CB82...... USA MADE 12/ctn...... 9 lbs/ctn

8” counter brush, black tampico fill, 2-1/2” trim, forfine debris. #CB89 #CB83...... USA MADE 12/ctn...... 9 lbs/ctn

#CB90 8” counter brush, black synthetic fill, 2-1/2” trim, forfine debris. #CB89...... 12/ctn...... 9 lbs/ctn

8” counter brush, 100% horsehair fill, 2-1/2” trim, forfine debris. #CB90...... USA MADE 12/ctn...... 9 lbs/ctn #CB84

8” counter brush, grey tampico fiber fill, 2-1/2” trim, forcoarse debris. #CB84...... COARSE USE...... USA MADE 12/ctn...... 10 lbs/ctn

UTILITY BRUSHES

Synthetic block, white tampico fill, 2” trim. (Not affected by acids.) #U90 #U90...... 8”...... USA MADE 12/ctn...... 7 lbs/ctn #U91...... 20”...... 12/ctn...... 11 lbs/ctn

#U93 Synthetic block, synthetic fill, 2” trim. (Acid-resistant.) #U93...... 8”...... USA MADE 12/ctn...... 7 lbs/ctn #U94...... 20”...... 12/ctn...... 11 lbs/ctn

Synthetic block, palmyra fill, 2” trim. (Not affected by acids.) #U96...... 8”...... USA MADE 12/ctn...... 6 lbs/ctn #U97...... 20”...... 12/ctn...... 10 lbs/ctn #U96

Synthetic block, white nylon fill, 2” trim. #U98...... 8”...... USA MADE 12/ctn...... 7 lbs/ctn #U98 #U99...... 20”...... 12/ctn...... 10 lbs/ctn #UM70B Hardwood block, crimped blue plastic fill, 1-3/4” trim. #UM70B...... 20”...... USA MADE 12/ctn...... 10 lbs/ctn

GENERAL PURPOSE HAND BRUSHES - SYNTHETIC HANDLE

These hand brushes are used for a variety of brushing and cleaning applications. USA MADE Block size is 7-1/8” x 7/16”. Material is 3 x 7 rows, 1/2” trim. #P8138SS...... Stainless Steel Fill...... 36/ctn...... 2 lbs/ctn #P8138B...... Brass Fill...... 36/ctn...... 2 lbs/ctn #P8138N...... Nylon Fill...... 36/ctn...... 2 lbs/ctn

PARTS CLEANING BRUSH

Metal ferrule, poly handle, polypropylene fill, 2-1/2” trim.

#PCB12...... 12/ctn...... 3 lbs/ctn

ROUND SASH BRUSHES 1/2” wide, china bristle fill, 2” trim. foam handle, 9” overall length. #350-2...... 12/ctn...... 2 lbs/ctn 7/8” wide, china bristle fill. 2” trim. foam handle, 10” overall length. NEW #350-6...... 12/ctn...... 2 lbs/ctn

The Brush Man, LLC www.brushman.com [email protected] PAGE: 18 SYNTHETIC UPRIGHT BROOMS

Upright-household, angled, flagged synthetic, w/48” plastic-coated handle attached. 9” sweeping width. Works great in small or confined areas. #HPA-S...... Household...... 12/ctn...... 12 lbs/ctn

Upright-commercial, angled, flagged synthetic, w/48” plastic-coated handle attached. Flagged synthetic 12” sweeping width. Larger sweeping surface than the household. bristles. Great for fine dust areas! #HPA-L...... Commercial...... 12/ctn...... 18 lbs/ctn

JANITOR - WAREHOUSE UPRIGHT BROOMS

#JAC34 #W34 #WR40 Janitor, 100% all corn, 4-sew. USA MADE #JAC34...... 12/ctn...... 36 lbs/ctn

Warehouse, corn blend, wire band, 4 sew, clear lacquered handle. #W34...... Our recommended broom for value!...... 12/ctn...... 34 lbs/ctn

Warehouse, heavy rattan fill, wire band, 40 lbs/dozen. Great for roofers serious about gravel sweeping. #WR40...... 12/ctn...... 40 lbs/ctn

Roofers should try our #500 - It’s even better than the #WR40 for gravel sweeping - lasts 20 times longer, we guarantee it!

Metal-cased stiff synthetic fill upright broom. 1-1/8” dia. handle. A great broom. USA MADE

#500 ...... Metal-cased synthetic upright...... 6/ctn...... 18 lbs/ctn #500

Use on every job imaginable - guaranteed value or return, used or new, for total credit. Try them!

HOUSEHOLD - WHISK & LOBBY BROOMS

Household, 100% all corn, 3 sew, velvet cap. #HAC24 #HM24 #LOBBY #HAC24...... 12/ctn...... 16 lbs/ctn

Household, slight mix, velvet cap, 5 sew. #HM24...... 12/ctn...... 24 lbs/ctn

Lobby, 100% all corn, 3-sew, red handle, 8-1/2” sweeping width, 39” overall length. #LOBBY...... 12/ctn...... 12 lbs/ctn

Whisk broom, 100% fine corn, 2 sew, metal hanging cap, 6-1/2” sweeping width, 11” overall length. #WHISK-ALL CORN #WHISK-ALL CORN...... 12/ctn...... 5 lbs/ctn

DUST PANS

Clip-on plastic dust pan, 9-1/2” wide. USA MADE #DUST PAN 9-1/2P...... 12/ctn...... 4 lbs/ctn #DUST PAN 9-1/2P

Patented lobby dust pan - allows the handle to be slanted back making it easier to sweep dust and debris into the pan! Compact and hangs nicely due to its low profile. 1”1 width. #HPA-S #DUST PAN-LOBBY...... Lobby dust pan...... 6/ctn...... 10 lbs/ctn w/33” yellow metal handle #HPA-S...... Household upright broom w/48” handle...... 12/ctn...... 12 lbs/ctn

Black steel dust pan, 12” wide, Industrial-Contractor use. #DUST PAN #DUST PAN...... 12/ctn...... 14 lbs/ctn USA MADE #DUST PAN-LOBBY

The Brush Man, LLC www.brushman.com [email protected] PAGE: 19 APPLICATOR PADS & BLOCKS

Genuine super quality 100% lambswool. All have 3/4” nap.

#A12...... 12” lambswool applicator pad...... 1/bag...... 1 lb/ctn USA MADE #A16...... 16” lambswool applicator pad...... 1/bag...... 1 lb/ctn #A18...... 18” lambswool applicator pad...... 1/bag...... 1 lb/ctn Lambswool Applicator Pad #AB12...... 12” block & lambswool applicator pad...... 1/bag...... 1 lb/ctn ...... 1/bag...... 1 lb/ctn Lambswool #AB16 16” block & lambswool applicator pad Pad With Block #AB18...... 18” block & lambswool applicator pad...... 1/bag...... 2 lbs/ctn

WIRE HAND BRUSHES USA MADE Made in America with American steel. Smooth hardwood blocks. Extensively used to brush away castings, welds and metal chips. Also for removing rust, scale, grease and #WS583 dirt from metal surfaces.

Curved handle, 14” x 1-1/8” block, tempered steel wire, 4 x 19 rows. #WS583...... 12/ctn...... 6 lbs/ctn #WS883

Curved handle, 14” x 1” block, tempered steel wire, 3 x 19 rows.

#WS883...... 12/ctn...... 5 lbs/ctn #WS883SC Same as #WS883 but with scraper. #WS883SC...... 12/ctn...... 6 lbs/ctn

Same as #WS883 but with stainless steel fill. #WS883SS...... 12/ctn...... 5 lbs/ctn #WS783 Shoe handle, 10” x 1” block, tempered steel wire, 4 x 16 rows. #WS783...... 12/ctn...... 5 lbs/ctn #WS783SC Same as #WS783 but with bronze fill.

#WS783B...... 12/ctn...... 5 lbs/ctn #WS483

Same as #WS783 but with scraper. #WS783SC...... 12/ctn...... 6 lbs/ctn

Straight back, 7-1/4” x 2-1/4” block, tempered steel wire, 6 x 19 rows. #WS483...... 12/ctn...... 10 lbs/ctn

#WS592SC Scraper scratch, 11-1/2” x 1-1/2” block, tempered steel wire, 4 x 11 rows. #WS592SC...... 12/ctn...... 7 lbs/ctn

COUPLING TUBE BRUSH

Carbon wire coupling tube brush. 1-1/2” diameter tapered to 1” diameter, 1-3/4” USA MADE brush part, 3.15” overall length. .006 gauge high carbon steel wire, single spiral, single stem, #11 stem. #CPS-1...... 500/ctn...... 36 lbs/ctn NEW

ACID BRUSHES

Tin ferrule acid brushes, horsehair fill. All have 6” overall length. USA MADE #ACID 1...... 3/8” width, 3/4” trim...... 1 gross/ctn...... 3 lbs/ctn #ACID 2...... 1/2” width, 13/16” trim...... 1 gross/ctn...... 4 lbs/ctn

STEEL RUST REMOVAL BRUSHES 8-1/2” carbon steel core, 3/4” diameter, straight stainless USA MADE steel or high carbon steel filament, 1-5/8” trim, 1-1/8” wide flat brush part, 5/16” hanging hole. #FLAT-BRUSH-STNL...... STAINLESS STEEL...... 12/ctn...... 3 lbs/ctn #FLAT-BRUSH-TEMP...... HIGH CARBON STEEL...... 12/ctn...... 3 lbs/ctn NEW

The Brush Man, LLC www.brushman.com [email protected] PAGE: 20 SYNTHETIC FILL PAINT BRUSHES

Width Thickness Trim Filled with black polyester, plastic handle, economy use (Imported) #PB31710...... 1...... 3/8...... 2...... 12/ctn...... 1 lb/ctn #PB31715...... 1-1/2...... 7/16...... 2...... 12/ctn...... 1 lb/ctn #PB31740 #PB31720...... 2...... 7/16...... 2...... 12/ctn...... 2 lbs/ctn #PB31730...... 3...... 1/2...... 2-1/4...... 12/ctn...... 2 lbs/ctn #PB31740...... 4...... 5/8...... 2-3/4...... 12/ctn...... 4 lbs/ctn

Filled With gold polyester, chisel trim. Black solid plastic USA MADE #PBP3974 handle, brass-plated steel ferrule. For all latex or oil .

#PBP3972...... 2...... 9/16...... 2-7/16...... 24/ctn...... 2 lbs/ctn #PBP3973...... 3...... 11/16...... 2-11/16...... 12/ctn...... 2 lbs/ctn #PBP3974...... 4...... 7/8...... 3-7/16...... 12/ctn...... 4 lbs/ctn

CHINA BRISTLE FILL PAINT BRUSHES

Width Thickness Trim Filled With Black China Bristle, Wood Handle (Imported) #PB832-4 #PB832-1...... 1...... 3/8...... 2...... 12/ctn...... 2 lbs/ctn #PB832-2...... 2...... 1/2...... 2...... 12/ctn...... 2 lbs/ctn #PB832-2-1/2...... 2-1/2...... 1/2...... 2-1/4...... 12/ctn...... 2 lbs/ctn #PB832-3...... 3...... 9/16...... 2-1/4...... 12/ctn...... 3 lbs/ctn #PB832-4...... 4...... 5/8...... 2-9/16...... 12/ctn...... 3 lbs/ctn

Filled With White China Bristle, Wood Handle (USA Made) #PBZ1101-1...... 1...... 7/16...... 2-3/8...... 24/ctn...... 2 lbs/ctn #PBZ1101-3 #PBZ1101-1-1/2...... 1-1/2...... 1/2...... 2-3/8...... 24/ctn...... 3 lbs/ctn #PBZ1101-2...... 2...... 9/16...... 2-3/8...... 24/ctn...... 3 lbs/ctn #PBZ1101-3...... 3...... 11/16...... 2-7/8...... 12/ctn...... 5 lbs/ctn #PBZ1101-4...... 4...... 11/16...... 3-3/8...... 12/ctn...... 6 lbs/ctn

Filled With White China Bristle, Wood Handle (USA Made) #CHINA BOY 1-1/2.....1-1/2...... 1/2...... 2-3/8...... 12/ctn...... 3 lbs/ctn NEW 2”, 2-1/2” & 3” also available - special order. #CHINA BOY 1-1/2

FOAM PAINT BRUSHES

#PB-1F...... 1” foam paint brush, wood handle...... 50/ctn...... 2 lbs/ctn #PB-2F...... 2” foam paint brush, wood handle...... 50/ctn...... 2 lbs/ctn #PB-2F #PB-3F...... 3” foam paint brush, wood handle...... 40/ctn...... 2 lbs/ctn #PB-4F...... 4” foam paint brush, wood handle...... 30/ctn...... 2 lbs/ctn

PAINT TRAYS & LINERS

4” plastic paint tray. #PAINT TRAY 4P...... 200/ctn...... 29 lbs/ctn

#PAINT TRAY 4P Economical - metal throw-away tray. #PAINT TRAY 9M #PAINT TRAY 9M...... 24/ctn...... 21 lbs/ctn #PAINT TRAY 9LNR

Disposable plastic liner fits our 9” metal paint tray. #PAINT TRAY 9LNR...... 144/ctn...... 13 lbs/ctn

Economical - poly re-usable tray. (SPECIAL ORDER) #PAINT TRAY 9P #PAINT TRAY 9P...... 12/ctn...... 15 lbs/ctn

21” x 13” x 3-1/2” 6-quart deep well plastic paint tray, solvent-resistant. #PAINT TRAY 22 #PAINT TRAY 22...... 12/ctn...... 16 lbs/ctn

The Brush Man, LLC www.brushman.com [email protected] PAGE: 21 BLUE POLY TARPS #TARP 8X10BLU...... 8’ x 10’ tarp...... 20/ctn...... 22 lbs/ctn Blue poly tarps, rust-proof grommets #TARP 10X12BLU...... 10’ x 12’ tarp...... 18/ctn...... 24 lbs/ctn every 3 feet, 3/16” bolt roping in hem. #TARP 10X20BLU...... 10’ x 20’ tarp...... 12/ctn...... 31 lbs/ctn #TARP 12X16BLU...... 12’ x 16’ tarp...... 12/ctn...... 33 lbs/ctn #TARP 16X20BLU...... 16’ x 20’ tarp...... 8/ctn...... 37 lbs/ctn Other sizes #TARP 20X20BLU...... 20’ x 20’ tarp...... 6/ctn...... 30 lbs/ctn available - special #TARP 20X30BLU...... 20’ x 30’ tarp...... 4/ctn...... 34 lbs/ctn order or special #TARP 20X40BLU...... 20’ x 40’ tarp...... 2/ctn...... 24 lbs/ctn stock - call us! #TARP 30X40BLU...... 30’ x 40’ tarp...... 2/ctn...... 30 lbs/ctn #TARP 30X50BLU...... 30’ x 50’ tarp...... 1/ctn...... 18 lbs/ctn #TARP 40X40BLU...... 40’ x 40’ tarp...... 1/ctn...... 20 lbs/ctn #TARP 40X60BLU...... 40’ x 60’ tarp...... 1/ctn...... 28 lbs/ctn

HEAVY DUTY GREEN/BLACK TARPS Super heavy duty tarp, green on one side, black on the other. Plastic corner bars with grommets. Extra strong - 10 mil. Sun & fade resistant. Heat sealed seams.

#TARP 16X20G/B...... 16’ x 20’ tarp...... 4/ctn...... 42 lbs/ctn #TARP 20X30G/B...... 20’ x 30’ tarp (Special Order)...... 2/ctn...... 40 lbs/ctn #TARP 30X40G/B...... 30’ x 40’ tarp...... 1/ctn...... 44 lbs/ctn #TARP 40X60G/B...... 40’ x 60’ tarp...... 1/ctn...... 80 lbs/ctn BUTYL COATED DROP CLOTHS

9’ x 12’ butyl-coated drop cloth. • Absorbent • Reusable NEW #PAINT-DROPCLOTH...... 6/ctn...... 17 lbs/ctn • Tough!

PALLET COVERS Cover Size Covers Per Roll Tan covers. USA MADE #COVER 4X8-TAN...... 4’ x 8’...... 25 covers...... 1 roll/ctn...... 45 lbs/ctn #COVER 4X4-TAN...... 4’ x 4’...... 45 covers...... 1 roll/ctn...... 51 lbs/ctn

Clear cover for visibility. USA MADE #COVER 4X12-CLEAR...... 4’ x 12’...... 25 covers...... 1 roll/ctn...... 67 lbs/ctn #COVER 4X8-CLEAR...... 4’ x 8’...... 25 covers...... 1 roll/ctn...... 45 lbs/ctn #COVER 4X4-CLEAR...... 4’ x 4’...... 45 covers...... 1 roll/ctn...... 51 lbs/ctn

Black Covers USA MADE ALL ARE UVI #COVER 4X8-BLACK...... 4’ x 4’...... 45 covers...... 1 roll/ctn...... 51 lbs/ctn NEW PROTECTED! #COVER 4X4-BLACK...... 4’ x 4’...... 25 covers...... 1 roll/ctn...... 43 lbs/ctn

White Covers USA MADE #COVER 4X8-WHI...... 4’ x 8’...... 25 covers...... 1 roll/ctn...... 45 lbs/ctn NEW #COVER 4X4-WHI...... 4’ x 4’...... 45 covers...... 1 roll/ctn...... 51 lbs/ctn Contact us for details on private label pallet covers! Heavy duty 10-MIL white pallet covers. #COVER 4X8-WHI10.....10-MIL, 4’ x 8’.... 6 covers...... 1 roll/ctn...... 49 lbs/ctn NEW POLY SHEETING & PAINTER’S PLASTIC

Construction sheeting made from polyethylene which provides for the optimum in USA MADE economy and performance. Good weatherability, chemical inertness and toughness. #POLY 10X100-4C...... 10’ x 100’ clear, 4 mil - SPECIAL ORDER...... 1 roll/ctn...... 19 lbs/ctn #POLY 20X100-4C...... 20’ x 100’ clear, 4 mil - IN STOCK...... 1 roll/ctn...... 43 lbs/ctn

#POLY 10X100-6C...... 10’ x 100’ clear, 6 mil - SPECIAL ORDER...... 1 roll/ctn...... 29 lbs/ctn #POLY 20X100-6C...... 20’ x 100’ clear, 6 mil - IN STOCK...... 1 roll/ctn...... 57 lbs/ctn

8’4” x 400’ clear painter’s plastic. .001 mil thickness. USA MADE #POLY-PAINT 108C...... 1 roll/ctn...... 15 lbs/ctn

The Brush Man, LLC www.brushman.com [email protected] PAGE: 22 BETTER SPREADER® ADHESIVE ROLLERS

Makes adhered projects more efficent and contractors more profitbable! Available in 14” single wide or 27” double wide, suspends 5-gallon can(s) of bonding adhesive directly over the roller, allowing glue to be dispense from the can(s) These proven, clean-bonding adhesive dispensers eliminates the mess of hand rolling and spray USA MADE rigs while saving time and money!

• Adhesive dispensed directly from can. • Even & efficient spread of adhesive. • No tank or try to clog or clean. • No end of the day clean-up. NEW • No valves, cranks or messy overflow. • Double production over paint rollers. • Roller changes in seconds.

#SPREADER-BTRSNG...... 14” Single Wide Spreader...... 1/ctn...... 43 lbs/ctn #SPREADER-BTRDBL...... 27” Double Wide Spreader...... 1/ctn...... 54 lbs/ctn

TANK SPREADERS Available in 14” single wide and 27” double wide, make coverages simple and FAST with these easy-to-use gravity-fed tank rollers. 14” Single Wide Roller 27” Double Wide Roller • 14” disposable rollers. • 27” disposable rollers. NEW • Pre-drilled holes save waste. • 3 easy steps: Fill - Apply - Drain USA MADE • Durable polyethylene 5-gallon • 8-gallon changeable polyethylene tank allows easy clean-up tank. • Small & maneuverable. • Easy clean up. • Easily cleaned. • Fill & go. • Fill & go. • Good for low VOC adhesives or coatings.

#SPREADER-TNKSNG...... 14” Single Wide Tank Roller...... 1/ctn...... 57 lbs/ctn #SPREADER-TNKDBL...... 27” Double Wide Tank Roller...... 1/ctn...... 70 lbs/ctn

USA MADE Super Wide Tank Spreader • No waste preserves unused adhesive. Accurately applies more than 300 sq. ft. per minute for • Easily holds two buckest of material. any pourable material. 40” polyethylene tank allows • Different size holes accommodate bonding fast application and easy clean-up. 40” dispoable adhesive, cold process, coatings. rollers make accurate coverage simple and FAST in • Durable polyethylene tank allows easy 3 easy steps: Fill - Apply - Drain. clean-up. NEW

#SPREADER-SUPER...... 40” Super Tank Spreader...... 1/ctn...... 82 lbs/ctn

REPLACEMENT ROLLERS

14” replacement roller for single wide Better Spreader® and Tank Spreader. #SPREADER-RLRSNG...... 9/ctn...... 37 lbs/ctn USA MADE 27” replacement roller for double wide Better Spreader® and Tank Spreader. NEW #SPREADER-RLRDBL...... 9/ctn...... 65 lbs/ctn

40” replacement roller for Super Wide Tank Roller. #SPREADER-SPRRLR...... 1/ctn...... 11 lbs/ctn

16” replacement Titan rollers. 4” diameter rollers - makes any rolling application process twice as productive! Lubricated thru-axle. Applies coatings, paints & adhesives fast! NEW USA MADE RC-TITAN-16...... 12/ctn...... 21 lbs/ctn

VEE MANIFOLD FOR APPLYING TWO-PART ADHESIVES

• Stright flow path reduced clogging. Ahdesive flow is the key to 2-part adhesive application. If the manifold becomes • Stright flow path allows for easy clean out. clogged, precious production time is lost. With the Vee Manifold, the • Production back up & running in seconds, not hours. flow path is straight so that a drill can quickly • Eliminates daily start up & shut down procedures. and easily restore flow • 12” drill bit provided. to clogged tubes. • Economical. • Saves downtime. NEW USA MADE #VEE-MANIFOLD...... 1/ctn...... 6 lbs/ctn The Brush Man, LLC www.brushman.com [email protected] PAGE: 23 ROPE Manila Rope Natural Fiber - Inexpensive. For general purpose use. Spliceable - holds knots well. Resists heat and sunlight. #ROPE MA1/4X1200...... 1/4” x 1,200’ manila rope...... 1/ctn...... 17 lbs/ctn #ROPE MAN3/8X600...... 3/8” x 600’ manila rope...... 1/ctn...... 19 lbs/ctn #ROPE MAN1/2X600...... 1/2” x 600’ manila rope...... 1/ctn...... 45 lbs/ctn #ROPE MAN3/4X600...... 3/4” x 600’ manila rope...... 1 coil...... 78 lbs/coil

3-Strand Manila Rope Coilettes #ROPE MAN1/4X100...... 1/4” x 100’ coilette...... 24/ctn...... 48 lbs/ctn #ROPE MAN3/8X100...... 3/8” x 100’ coilette (Special Order)...... 9/ctn...... 30 lbs/ctn #ROPE MAN1/2X100...... 1/2” x 100’ coilette (Special Order)...... 4/ctn...... 30 lbs/ctn #ROPE MAN3/4X100...... 3/4” x 100’ coilette...... 1/ctn...... 15 lbs/ctn

Roofers Hoist Ropes In 3-Strand Manila - 9/16” Forged Snap Hook #ROPESNAP 3/4X60...... 3/4” x 60’ manila w/snap hook...... 1 coil...... 11 lbs/coil #ROPESNAP 3/4X100.....3/4” x 100’ manila w/snap hook...... 1 coil...... 15 lbs/coil #ROPESNAP 3/4X180.....3/4” x 180’ manila w/snap hook...... 1 coil...... 30 lbs/coil Poly Rope 100% premium grade monofilament twisted polypropylene. Has more than twice the strength of manila rope. Has great resistance to most chemicals, oil, grease, acids, rot and mildew. Floats. Moderate elongation.

#ROPE P1/4X600...... 1/4” x 600’ poly rope...... 1 reel...... 8 lbs/reel #ROPE P1/4X1200...... 1/4” x 1,200’ poly rope...... 1 reel...... 12 lbs/reel

Truckers Rope California truck rope. Meets California state trucking codes. Has all the qualities of polypropylene , plus ultraviolet inhibitors for longer life. Good abrasion resistance and high strength make it excellent for tie-downs. Unaffected by water and able to float. Black with a bright orange surface marker.

#ROPE TR3/8X600 ...... 3/8” x 600’ truckers rope ...... 1 reel...... 17 lbs/reel

Sash Cord Firm round lockstitch cotton braid with a glazed finish. Synthetic fiber core makes this cord twice as strong as pure cotton. Soft, pliable and easy on the hands. SPECIAL ORDER.

#ROPE SA1/4X100...... 1/4” x 100’ #8 sash cord...... 24 coils/ctn...... 36 lbs/ctn #ROPE SA1/4X1000...... 1/4” x 1,000’ #8 sash cord...... 1 coil...... 13 lbs/coil

Sisal Rope Natural Fiber - Inexpensive.

#ROPE SIS1/4X50...... 1/4” x 50’ sisal rope...... 48 coils/case...... 48 lbs/case #ROPE SIS1/4X100...... 1/4” x 100’ sisal rope...... 48 coils/case...... 83 lbs/case

TWISTED MASON TWINE

Twisted line is a fine choice for mason line and other marking needs. Choosing twisted line is often an economical choice - 10% more line per spool over braided. #TWINE-TW-250-O...... 275’ Reel...... ORANGE...... 12/ctn...... 5 lbs/ctn

Other colors available - special order.

NYLON ZIP TIES

Black nylon zip ties. #TIE-NY-14B-120...... 14”, 120#...... 100/bag...... 1 lb/bag NEW

The Brush Man, LLC www.brushman.com [email protected] PAGE: 24 ROOFING TORCHES

TurboRoofer field torch kit. Featuresdual-valve handle with brass and stainless steel construction. #TORCH KIT...... 1/ctn...... 7 lbs/ctn

• 32” Torch Assembly w/Stand • 25’ Hose • U.L. Listed Adjustable Regulator • Flint Striker Spark Lighter

TurboRoofer combination field torch kit. Includes 32” & 18” torch assemblies. Each torch features dual-valve handle with brass and stainless steel construction. #TORCH KIT COMBO...... 1/ctn...... 9 lbs/ctn

• 32” Torch Assembly w/Stand • 18” Torch Assembly w/Stand • Quick-Connect Fitting For Handle • Quick-Connect Fitting For Hose • 25’ Hose • U.L. Listed Adjustable Regulator • Flint Striker Spark Lighter

CORE CUTTERS

For retrieving core samples from roof surfaces. Removable handle. It can extract up to 7” of sample material. 2” diameter.

#CORE CUTTER ...... 1/ctn...... 5 lbs/ctn

Power-Core Core Cutter. For use with heavy duty cordless and corded drills with 1/2” minimum drill chucks and high torque motors. Power- Core uses a heavy duty threaded rod to power the cutting tube (drill forward direction) in taking core. When the core has been taken, simply reverse the drill direction to eject the core. 2” diameter. Extracts up to 7”. #CORE CUTTER-PWR ...... 1/ctn...... 4 lbs/ctn

DIAMOND BLADES - QUALITY BLADES AT A COMPETITIVE PRICE General Purpose Blade 4.5” diameter turbo blade. #BLADE-TURBO-4.5...... 1/ctn...... 1 lb/ctn #BLADE-TUCK-4.5 Applications: Mortar Removal, Concrete Features: Sintered, Turbo Style, Continuous Rim, Polished, Dry/Wet Use Equipment: Angle Grinder, Circular Saw, Masonry Saw, High Speed Power Saw, Dry Use, Wet Use

Tuck Point Blade Used by commercial roofers 4.5” diameter standard tuck blade. .250” rim thickness. #BLADE-TURBO-4.5 to install flashing. #BLADE-TUCK-4.5...... 1/ctn...... 1.2 lbs/ctn

Applications: General Purpose, Block, Concrete, Pavers, Brick Features: Sintered/Brazed, Key Hole Gullet, Polished, Wet/Dry Use Equipment: Angle Grinder, Circular Saw, Dry Use, Wet Use

Concrete/Masonry Blade #BLADE-MASON-14 14” general purpose segmented concrete/masonry blade. Segmented rim for multiple applications allows for quick material removal. High concentration of premium grade Wet or dry use. diamonds provide faster cleaner cuts and extended blade life. Optimum diamond size Can be used in gas and distribution provide constant cutting performance. hand saw, electric hand saw, masonry #BLADE-MASON-14...... 1/ctn...... 4.3 lbs/ctn table saw & under 15hp walk behind saw.

The Brush Man, LLC www.brushman.com [email protected] PAGE: 25 PLASTIC BUCKETS & PAILS

5 Gallon Bucket & Lids 5 gallon pail, white plastic (Lid not included). USA MADE #PAIL-5 GAL-W...... 120/skid...... 250 lbs/skid #PAIL-LID 5

Lid for 5 gallon pail.

#PAIL-LID 5...... 168/skid...... 92 lbs/skid #PAIL-LID 5-SP Lid with spout for 5 gallon pail. #PAIL-LID 5-SP...... 168/skid...... 126 lbs/skid #PAIL-5 GAL-W

2 Gallon Bucket #PAIL-2 GAL 2 gallon pail, white plastic. Without lid. USA MADE #PAIL-2 GAL...... 234/skid...... 200 lbs/skid #PAIL-5 QT W/HDL Multi-Mix Containers 10 quart multi-mix container with handle. Visible quart & liter measure, solvent-resistant, re-useable, high-density polyethylene. USA MADE #PAIL-10 QT W/HDL...... 12/ctn...... 10 lbs/ctn

5 quart multi-mix container. Visible quart & liter measure, solvent- resistant, re-useable, recyclable high-density polyethylene. USA MADE #PAIL-5 QT...... 50/ctn...... 15 lbs/ctn

5 quart multi-mix container with handle. Visible quart & liter measure, #PAIL-10 QT W/HDL solvent-resistant, re-useable, high-density polyethylene. USA MADE #PAIL-5 QT W/HDL...... 24/ctn...... 10 lbs/ctn

#PAIL-2-1/2 QT 2-1/2 quart multi-mix container. Visible quart & liter measure, solvent-resistant & re-useable high-density polyethylene. USA MADE #PAIL-2-1/2 QT...... 100/ctn...... 18 lbs/ctn

1 quart multi-mix container. Solvent-resistant & re-useable USA MADE high-density polyethylene. #PAIL-1 QT #PAIL-1 QT...... 300/ctn...... 23 lbs/ctn

PLASTIC PAIL LID OPENER

Plastic lid opener removes lids from plastic USA MADE and buckets. Will not cut or distort container. #PAIL-OPENER...... 1/ctn

METAL PAIL & LID (SPECIAL ORDER)

5 gallon metal pail (Lid not included). USA MADE #PAIL-5 GAL MTL...... 120/skid...... 365 lbs/skid

Lid for 5 gallon metal pail. #PAIL-LID 5 MTL #PAIL-LID 5 MTL...... 60/ctn...... 38 lbs/ctn #PAIL-5 GAL MTL

MIXERS

24” long heavy duty paint mixer with 3-3/4” mixer blade. Hex shaft eliminates slipping in the drill. Fits all drills 3/8” and larger. Rust-resistant coating. Use for mixing all paints and coatings. #MIXER-MUD Recommended for 2-1/2 gallon and larger cans or pails. #MIXER-PAINT #MIXER-PAINT...... 6/ctn...... 7 lbs/ctn

28” long heavy duty mixer with 8-1/2” x 4-1/2” mixer blade. Ideal for stirring paint, drywall mud and acoustic. Blade is welded to a 3/8” hex shaft. Fits any 3/8” or larger slow speed drill (500 rpm). #MIXER-MUD...... 6/ctn ...... 12 lbs/ctn The Brush Man, LLC www.brushman.com [email protected] PAGE: 26 BUTYL-BASED TAPES EPDM Cover Tape A self-adhesive fully cured EPDM roll that instantly seals and waterproofs tears, holes, and punctures. Installs fast and easy which saves time and money. Can be applied from -15° F to 150° F. Does not absorb moisture, and will not peel, shrink, or crack. 5” x 25’ roll. #CVRSTRP-BL-5X25...... 4 rolls/ctn...... 20 lbsctn

Permabond Roof Tape NEW Instantly seals and waterproofs tears, holes, and punctures. Can be applied from -15° F to 150° F. Does not absorb moisture, and will not peel, shrink or crack. 4” x 50’ roll. #TAPE-BL-4X50...... Black...... 4 rolls/ctn...... 20 lbsctn #TAPE-CLEANER #TAPE-WH-4X50...... White...... 4 rolls/ctn...... 20 lbsctn

Rubber Seal Roof Cleaner A water base, non-solvent, biodegradable, non-toxic, phosphate free cleaner. This heavy duty all purpose cleaner produces a rich foam which penetrates & dissolves grease, oil, graphite, silicone, ink, dirt, fats, & proteins. Will not harm grass, shrubs, or flowers. #TAPE-CLEANER...... 6/ctn...... 11 lbs/ctn

Rubber Seal Roof Primer An adhesive & surface conditioner intended to aid adhesion of butyl & other self adhesive seaming tapes. Light stabilizers & antioxidants protect exposed material from premature aging. Dries clear and tack-free to avoid dirt pick-up. 16 oz. aerosol. #TAPE-PRIMER...... 6/ctn...... 11 lbs/ctn #TAPE-PRIMER

EMERGENCY LEAK STOP

Emergency Leak Stop is a natural mineral compound that expands into a gel instantly, upon contact with water, to make a temporary leak-proof seal for flat built-up roofs. Perfect for sealing leaking roofs in inclement weather. Can be applied even in pouring NEW rain & will move through standing water to stop leaks in minutes. Non-polluting and will not support flame. #ROOF-PATCH...... 1/ctn...... 32 lbs/ctn

TROWELS

Pointing Trowels #TROWEL-PTG-7 #TROWEL-PTG-5-1/2...... 5-1/2” x 2-3/4” blade...... 12/ctn...... 4 lbs/ctn #TROWEL-PTG-7...... 7” x 3” blade...... 12/ctn...... 5 lbs/ctn #TROWEL-MAR-5

Margin Trowel

#TROWEL-MAR-5...... 5” x 2” blade...... 12/ctn...... 5 lbs/ctn #TROWEL-GAUG-7

Gauging Trowel

#TROWEL-GAUG-7...... 7” x 3-3/8” blade...... 12/ctn...... 6 lbs/ctn

#TROWEL-MXS64HD Finishing Trowels 14” x 4” high grade hardened & tempered spring steel blade, properly shaped, aluminum allow Xtralite® mounting, beveled work edges prevent surface aggregate popping, resilient DuraSoft® handle provides soft feel, reduces fatique & offers excellent durability. USA MADE #TROWEL-MXS64HD...... 14” x 4” blade...... 12/ctn...... 15 lbs/ctn

14” x 4” polished steel blade, aluminum mounting, comfortable curved wood handle. NEW #TROWEL-CEM-14X4...... 14” x 4” blade...... 12/ctn...... 15 lbs/ctn #TROWEL-CEM-14X4

The Brush Man, LLC www.brushman.com [email protected] PAGE: 27 RAGS

Reclaimed White Flannel Rags Very best for absorption. For every kind of clean-up. Roofers also use them for seam scrubbing. USA MADE #RAG-FLANNEL-WH...... 10 lbs / ctn All of the listed rags are packaged in machine- Our very best quality rag! compressed cartons. Instead of a ‘large’ carton containing rags to equal 10 lbs, the ‘compressed’ cartons are less carton - more rag to equal 10 lbs plus they New Pre-Washed White Knit Wipers take up less space for storage and ‘on the job’ placement. This rag receives a special process, eliminating the resins that prevent asborption. Need a sample of a particular rag? Give us a call! We want Does the same job as our #RAG-FLANNEL-WH, you to get the right rag for the job. Please let us know if you just a different type of rag have anysuggestions, comments, problems, solutions, etc. (white knit). It is more USA MADE We are here to serve you with what you need and want. expensive. #RAG-KNIT-WH-NEW...... 10 lbs / ctn Quality will always win out over price. ‘Only price’ means nothing else is known - until it’s too late! Recycled Pre-Washed White Knit Wipers Prewashed white cotton knit rags, soft, lower lint. USA MADE Reclaimed Colored Sweatshirt Rags (Fleece) Recycled. A colored sweatshirt rag. Not recommended for #RAG-KNIT-WH-REC...... 10 lbs / ctn ‘scrubbing seams’ - it will bleed. Not a great absorbing rag but the price is the lowest of all the rags we stock - So is the lower performance. USA MADE Recycled Pre-Washed COLORED Knit Wipers #RAG-CLRSWEAT-10...... 10 lbs / ctn Prewashed colored cotton knit rags, soft, lower lint. USA MADE Reclaimed White Cotton Sheet Rags Recycled. White sheeting, low lint, lightweight but heavy ...... #RAG-KNIT-CL-REC 10 lbs / ctn duty. Good for colorfast applications.. USA MADE #RAG-WCOT-SHT-10...... 10 lbs / ctn Reclaimed White or Gray Sweatshirt Rags (Fleece) Has seams but no decals, zippers or other attachments. Roofers use them when scrubbing seams. They are not as absorbent as our high Disposable Shop Rags quality white flannel rags listed 9/5” x 16.5” paper wipers. Pop-up carton fo above but will still do a clean-up USA MADE easy dispensing. at a lower price. 100 wipers per USA MADE #RAG-WHTSWEAT-10...... 10 lbs / ctn carton/8 ctn/case. #RAG-WHT-PAPER...... 16 lbs/cse GRAY reclaimed sweatshirt rags. #RAG-GRYSWEAT-10...... 10 lbs / ctn

USA MADE

NEW Need a rag we don’t show? Call us - we can special order/stock it for you!

HAND PAD

Variety of cleaning/scrubbing jobs require this pad. USA MADE 6” x 9” x 1/4” pads, green, for medium duty. #PAD-HAND-GREEN...... 60 ea/case...... 5 lbs/case

EPDM SCRUBBING SPONGE

6” x 4-1/4” x 1-1/4” thick cellulose sponge with USA MADE green scrub pads on each side. Holds a lot of solution for #EPDM SPONGE 6 ...... 50/ctn...... 7 lbs/ctn scrubbing seams on roofs.

The Brush Man, LLC www.brushman.com [email protected] PAGE: 28 SCRUBBING PADS - 10” X 4-1/2” X 3/4” USA MADE These pads are used for a variety of scrubbing duties.

10” x 4-1/2” x 3/4” scrubbing pads. 20 each/case Color Scrubbing Action #PAD10-WHITE...... White...... Light Duty...... 2 lbs/case #PAD10-BLUE...... Blue...... Medium Duty...... 4 lbs/case #PAD10-BROWN...... Brown...... Medium-Agressive...... 2 lbs/case

SCRUBBING PAD HOLDERS

Hand-held pad holder. Use with 10” scrubbing pads. Allows even pressure and efficient scrubbing. #PADHOLDER-HAND...... 1 ea/case...... 1 lb/case

Swivel pad holder. Use with 10” scrubbing pads. Using a threaded handle allows work in confined and hard-to-reach areas while being able to stand upright! Use any size standard #PADHOLDER-SWIV...... 1 ea/case...... 1 lb/case threaded handle.

CAULKING GUNS

Skeleton Frame Caulking Guns Metal, non-drip, 7:1 thrust ratio,ladder hook, seal puncture tool, 10.3 oz. (Cox) # 10-7-SF-D #CAULK 10-7-SF-D...... 12/ctn...... 15 lbs/ctn

Same style as #10-7-SF-D but very low priced import. #CAULK 10-10-SF #CAULK 10-10-SF... 10 oz size.....12/ctn...... 14 lbs/ctn

Rotating frame, nozzle clean-out tool, 1 quart size. Import. #CAULK 32-18-SFD...... 6/ctn...... 15 lbs/ctn #CAULK 32-18-SF-D

Skeleton Frame Caulking Guns Metal gun, barrel turns, Jumbo 32 oz., 18:1 thrust ratio, seal puncture tool. #CAULK 32-18-HB #CAULK 32-18-HB...... 6/ctn...... 17 lbs/ctn #CAULK 10-18-HB

Metal gun, barrel turns, 18:1 thrust ratio, 12.8 oz. (1/10 gallon), seal puncture tool. #CAULK 10-18-HB...... 6/ctn...... 12 lbs/ctn

Half-barrel gun, professional smooth rod, 10 oz size. #CAULK 10-3-HB

Economy import. #CAULK 51001 #CAULK 10-3-HB...... 24/ctn...... 25 lbs/ctn

Sausage/Cartridge/Bulk Caulking Gun Uni-pak caulking gun. Includes 2 green , 5 white tips, nozzles, ladder hook and spanner . #CAULK 51001...... 1/ctn...... 3 lbs/ctn

The Brush Man, LLC www.brushman.com [email protected] PAGE: 29 SEAM ROLLERS

Double fork steel roller, 2” wide x 2” diameter. Slightly rounded edges - won’t cut material membranes. Enclosed bearings, 5” wood handle. #SEAM-2S #SEAM-2S ...... Steel Roller...... USA MADE 5/ctn...... 10 lbs/ctn

Single fork steel radius roller, 2” wide x 2” diameter. Enclosed bearings, 5” wood handle. For use around flashings. #SEAM-2RADS #SEAM-2RADS...... Steel Roller...... USA MADE 5/ctn...... 10 lbs/ctn

Single fork silicone rubber roller, 1-3/4” wide x 1-5/16” diameter. Non- #SEAM-1.75R stick, heat-resistant surface. Enclosed bearings, 5” wood handle. #SEAM-1.75R...... Silicone Roller...... 12/ctn...... 9 lbs/ctn

Double fork silicone rubber roller, 4” wide x 2” diameter. Non-stick, heat-resistant surface. Enclosed bearings, 5” wood handle. #SEAM-4R #SEAM-4R...... Silicone Roller...... 3/ctn...... 7 lbs/ctn

Double fork steel roller, 4” wide x 2” diameter. Foam covered 5” handle with metal threads to allow a threaded handle to be used for standing while rolling out a seam. (Special Order) #SEAM-4S-TSF #SEAM-4S-TSF...... Steel Roller...... USA MADE 3/ctn...... 5 lbs/ctn Use any threaded Single fork silicone rubber roller, 2” wide x 1-5/16” diameter. Non-stick, handle. heat-resistant surface. Enclosed bearing. Foam covered 5” handle with metal threads to allow a threaded handle to be used for standing while rolling out a seam. #SEAM-2R-TSF...... Silicone Roller...... USA MADE 5/ctn...... 7 lbs/ctn

#SEAM-4R-TSF Same as #SEAM-2R-TSF only double fork, 4” wide x 2” diameter. Silicone rubber roller. #SEAM-4R-TSF...... Silicone Roller...... USA MADE 3/ctn...... 9 lbs/ctn

Double fork nylon roller, 1/2” wide x 2” diameter. Enclosed bearings, #SEAM-170-1/2N 5” wood handle. (Special Order) #SEAM-170-1/2N.... Nylon Roller...... USA MADE 12/ctn...... 4 lbs/ctn

WRIST SAVERTM SEAM ROLLER The Wrist-Saver roller’s patent pending design allows for proper positioning USA MADE of your arm, wrist and hand into a neutral, relaxed working position. Keeps your wrist in a more comfortable position and your arm moves in a natural motion, helping you to increase leverage and avoid wrist strain. Breakthrough In Hand Roller #SEAM-WRISTSAVER...... 6/ctn...... 7 lbs/ctn Design!

75 LB SEAM ROLLER

75 lb polished steel roller, 16” wide. For application of self-adhered membranes. Detachable Legs Detachable pivoting legs with wheels to transport roller to and from the job site. & Handle. Steel handle also detachable.

Segmented rollers provide even pressure on uneven surfaces. Axles are inset to prevent any scuffing on the sides. #SEAM-16S75 ...... SPECIAL ORDER...... 1/ctn...... 80 lbs/ctn

The Brush Man, LLC www.brushman.com [email protected] PAGE: 30 ‘PICK-AND-ROLL’ DETAIL SEAM ROLLER

It is a seam roller AND weld probe pick in one tool. It combines the features USA MADE of the best-selling 1.75” wide silicone roller with our heavy-duty steel pick. The pick is at the same end as the roller, making it fast and easy to switch between rolling and picking. #SEAM-1.75RPROBE...... 5/ctn...... 5 lbs/ctn

Disappearing Pick

• No more torn clothes or other damage from Replaceable Pick exposed point. Carry and use like regular seam roller by keeping the pick safely retracted. Then, • No need to throw away when pick wears out. when needed, extend the pick out to any • Pick can also be used to smooth down and manipulate material. position. • Roller bracket features offset design for increased leverage and • Wing screw allows tool-free adjustment of pick. is extended to keep hands away from hot air welder.

RUBBER / BRASS COMBO SEAM ROLLER

Rubber/Brass roller combo gives roofers one tool for a multitude of hot air welding applications. #SEAM-1.75R-BRASS...... 5/ctn...... 5 lbs/ctn

• 1.75” wide silicone rubber roller on one end. • High quality sealed bearings. • .23” wide brass roller on the other end. • Rubber roller with single fork, • Hardwood handle. brass roller with double forks.

‘CHECK-MARK’ SEAM PROBE / MARKER It is a seam probe AND marker in one tool. Carry and use like a regular pick. Then, when needed, extend the crayon out to mark defective seams. Button allows for extension and retraction of the crayon. • Accepts standard 1/2” diameter lumber crayons. • 1 red hard lumber crayon included. • Replaceable pick...... 10/ctn...... 4 lbs/ctn #SEAM-PROBE-MRKR • Aluminum & steel construction.

SEAM TEST TOOLS

Economical seam test tool. Allows both standing and close-up work. Accepts standard threaded end handles - sold separately.

#SEAM-TEST TOOL...... 1/ctn...... 1 lb/ctn

Super duty contractor test tool. Features steel USA MADE construction and threaded end to accept extension handle. Deep cushion grip and replaceable parts. #SEAM-PROBE-HD...... 5/ctn...... 6 lb/ctn NEW

SPIKED SHOES

#SHOE-3/4” Durable black polypropylene shoes with 13 replaceable 3/4” steel spikes, adjustable straps, one-size-fits-all. Spikes already in place. #SHOE-3/4”...... 1 pair/ctn...... 2 lb/ctn

#SHOE-3/4-REPL...... 3/4” repl spikes...... 26 spikes/set, 1 set/ctn...... 1 lb/ctn

Green polypropylene shoes with 13 1-1/2” steel spikes, adjustable straps, one-size-fits-all. Spikes and nuts need installed. #SHOE-1-1/2” #SHOE-1-1/2”...... (Special order.)...... 1 pair/ctn...... 2 lbs/ctn

The Brush Man, LLC www.brushman.com [email protected] PAGE: 31 KNIVES

Heavy duty retractable blade knife. Ergonomic handle w/rubber grip on side with 3 blades. Changes blades fast & easy - no tools required! #KNIFE-RETR-HD...... 6/ctn...... 4 lbs/ctn #KNIFE-RETR-HD

Retractable blade standard grade utility knife with 1 blade. #KNIFE-RETR-STD #KNIFE-RETR-STD...... 10/ctn...... 4 lbs/ctn

Fixed blade quick-change utility knife with 1 blade. #KNIFE-FIXED-STD...... 12/ctn...... 5 lbs/ctn #KNIFE-FIXED-STD

AUTO-RETRACTING BLADE UTILITY KNIFE Heavy duty knife with spring-action self-retracting blade - slides securely into housing when not in use. Ergonomic grip. Tool-free blade replacement. NEW #KNIFE-RETR-SELF...... 5/ctn...... 4 lbs/ctn ‘GUARDIAN ANGLE’ ROOFING KNIFE

Specifically designed for cutting shingles. Features 3 Blades Included

hand and knuckle protection. Ergonomically superior USA MADE • Big Hook design reduces fatigue and increases leverage. • Bowtie #KNIFE-GUARDIAN...... 5/ctn...... 4 lbs/ctn • Standard Utility Blade

UTILITY & ROOFING KNIFE BLADES

Type 92 heavy duty utility blades, .025 thick. #BLADE-UTIL 100 #BLADE-UTIL 100...... 100 blades per carton (5 blades/pack, ...... USA MADE 1 lb/ctn 20 packs/carton) #BLADE-#92 DISP...... 100 blades in a dispenser...... USA MADE 1 lb/dispenser

Roofers standard deep hook blade, .025 thick. #BLADE-DEEP-HOOK #BLADE-DEEP HOOK...... 100 blades/carton (5 blades/pack, 20 packs/carton)...... 1 lb/ctn (Made in Sheffield England).

#BLADE-DEEP-DISP...... 100 blades in a dispenser...... USA MADE 1 lb/dispenser

Heavy duty deep hook blades - Made in USA! .025 thick. USA MADE #BLADE-DEEP HKHD...... 100 blades/carton (5 blades/pack, 20 packs/carton)...... 1 lb/ctn NEW

8” FLOORING SCRAPER BLADE 8” heavy duty flooring scraper blade, .036” thick. NEW #BLADE-SCRAPER-8...... 50 blades/ctn...... 15 lbs/ctn

5-IN-ONE SCRAPER TOOL

5-in-one scraper tool with rosewood handle. • Sharp Blade Scraper • Half-Round Cutout Removes Paint #5-IN-1-TOOL...... 12/ctn...... 4 lbs/ctn • Putty Remover From Paint Roller • Spreader • Sharp Point Opens Cracks For Patching NEW

The Brush Man, LLC www.brushman.com [email protected] PAGE: 32 INSULATION KNIFE

Double sided roofing and drywall knife. High carbon steel, hardened, ground and honed. Nylon handle. #KNIFE-INSUL...... 12/ctn...... 5 lbs/ctn

JAB SAW

Drywall jabsaw. This saw features triple-ground teeth with an aggressive tooth design that cuts drywall, plywood and plastic easily and quickly. #JAB SAW...... 3/ctn...... 3 lbs/ctn

SHEARS

Our shears are manufactured for continuous and intense production use. They are made from hot hammer forgings for genuine industrial grade hand tools. Correctly hardened, precisely groundand properly finished blades to assure clean cuts every time. Power lock screw. They can be re-sharpened USA MADE several times. Nickel plated steel! Won’t rust like most shears! 10” bent trimmers, 4-3/4” length of cut. Oversize offset handle. Oversize handle grip! Allows more grip even #SHEARS 210LR...... 6/ctn...... 6 lbs/ctn with gloves on!!

8” bent trimmers, 3-1/2” length of cut. Oversize offset handle. #SHEARS 208LR...... 6/ctn...... 3 lbs/ctn

FOR LEFTIES: LEFT HANDED 10” bent trimmers - Handle not oversize! Same quality forging and finishing as #210LR.

#SHEARS 210 LEFT...... 6/ctn...... 6 lbs/ctn

LIGHTWEIGHT, ERGO-DESIGN SHEARS

10” bent trimmers, 4-3/4” length of cut. Light, ergo-designed, soft blue handles that allow the operator to cut for long periods of time without the usual cramping of the hands! Oversize grip! A lighter shear and BIG price break but really does a great job! #SHEARS 7310...... 6/ctn...... 5 lbs/ctn Oversize Ergo-Designed Grip

AVIATION SNIPS

Forged and heat treated steel blades for strength & durability. Textured comfort grips are color-coded by cutting pattern. 1-1/4” (32mm) length of cut, 9-1/2” (241mm) closed overall length.

#SNIPS-LEFT...... Left Cut (green)...... 12/ctn...... 12 lbs/ctn #SNIPS-STRAIGHT...... Straight Cut (yellow)...... 12/ctn...... 12 lbs/ctn #SNIPS-RIGHT...... Right Cut (red)...... 12/ctn...... 12 lbs/ctn NEW

STAPLE HAMMER TACKER

Heavy-duty deluxe hammer tacker. #STAPLE-HAMMER...... 10/ctn...... 28 lbs/ctn

• Quick-Loading • Uses 5/16” - 9/16” staples. • Balanced Design • Compatible with Arrow T50, • Quick Jam Clear Rapid 140 and A-11 series staples.

The Brush Man, LLC www.brushman.com [email protected] PAGE: 33 MEASURING TAPES

Economy Tape Measures

25 ft locking, 1” wide tape measure, silver plastic case, The slide lock firmly locks in #TAPE-MEAS 25 place for hands-free working. Has plated belt clip. Graduated 1/16ths, inches and feet. Also has millimeter, centimeter and decimeter measurement. #TAPE-MEAS 25...... 25 ft tape measure...... 6/ctn...... 5 lbs/ctn

33 ft locking, 1-1/4” wide tape measure, rubber coated plastic housing, Has rubber wrist strap and plated belt clip. Graduated 1/16ths, inches and feet. Has easy to read 1/8”, 1/4”, 1/2” and #TAPE-MEAS 33 3/4” markings. #TAPE-MEAS 33...... 33 ft tape measure...... 5/ctn...... 7 lbs/ctn

Automatic Lock Tape Measure 25’ tape measure with AUTOMATIC LOCK. Blade lock automaticaly engages and retracts with the push of a button.

#TAPE-MEAS AUTO...... 6/ctn...... 5 lbs/ctn #TAPE-MEAS AUTO • AUTOMATIC LOCKING BLADE • 16-inch studs labeled. • Rubber grip prevetnts slips. • 19.3” truss labeled. • Nylon-coated, no-glare yellow blade.

Wide Blade Tape Measure 25’ tape measure with 1-3/16” wide blade. Blade lock automaticaly engages and retracts with the push of a button. 1” standard blade width. #TAPE-MEAS WIDE #TAPE-MEAS WIDE...... 6/ctn...... 6 lbs/ctn

• 1-3/16” WIDE BLADE • 16-inch studs labeled. • Rubber grip prevetnts slips. • 19.3” truss labeled. • Nylon-coated, no-glare yellow blade.

MEASURING WHEELS

40-inch circumference wheel (12.5” dia.). #TAPE-WHEEL-40...... 1/ctn...... 5 lbs/ctn #TAPE- WHEEL-12 • Heavy duty polycast wheel. • Measures up to 9,999.9 ft. • 3-piece pistol grip handle. • Handle telescopes to 23”. #TAPE-WHEEL-40 • Easy-read magnified counter • Flip-down kickstand.

12-inch circumference indoor/short-run wheel. #TAPE-WHEEL-12...... 1/ctn...... 3 lbs/ctn

• Handle telescopes from 17 inches • 5-digit, easy-read, magnified counter. 17 inches up to 38 inches. • Measures up to 9,999 ft. • Weighs less than 2 lbs, fits in a briefcase.

36” diameter premium quality measuring wheel. Enhanced grip pistol- #TAPE-WHEEL-36...... 1/ctn...... 5 lbs/ctn style handle increases control and comfort. • Re-set on the handle & on the unit • Center-line handle design with counter housing no more bending over, lifting on top of the wheel. Center of gravity the wheel or stepping on it to reset to aligned for perfect balance. zero. • Flip-down kickstand. • Brake on pistol grip - stops counting • Gear & shaft transmission for highest instantly. measurement accuracey and strength. • Collapsing hinge - snaps into extended • Handle lock - lock your handle in place lock with the flick of the wrist & it when you’re not using the wheel. disconnects if you forget to press the unlock trigger. Compact fold- down. Easity reduces to 1/2 its size for storage.

The Brush Man, LLC www.brushman.com [email protected] PAGE: 34 MEASURING REELS

Fiberglass open reel style tape measure. Tape is graduated 1/8ths, inches and feet. #TAPE-MEAS 100...... 100 ft...... 5/ctn...... 7 lbs/ctn #TAPE-MEAS 200...... 200 ft...... 5/ctn...... 15 lbs/ctn #TAPE-MEAS 200

POLAR / SOLAR PLUS POWER CORDS For those cold Stays flexible at minus 67° F - 2-1/2 times greater abrasion winter months - resistance than a vinyl cord. They have a power indicator light stays flexible. and are flame and water resistant. SJEOW cord. USA MADE 12/3 gauge. TRIPLE TAP 100’ TRIPLE TAP - 12/3 Gauge, SJEOW #EXT 100 LTPOL-3...... 4/ctn...... 51 lbs/ctn Power Indicator 12 Gauge Lighted

12 GAUGE POWER CORDS

Vinyl extension cords - 12 gauge, SJTW. Vinyl cords are abrasion and moisture resistant. They feature durable, molded ends and a power indicator light. 12/3 Gauge, 100’ Single Outlet USA MADE #EXT 100 12/3LT...... 100’ extension cord...... 4/ctn...... 52 lbs/ctn 12/3 Gauge, 50’ Single Outlet Power #EXT 50 12/3LT...... 50’ extension cord...... 6/ctn...... 39 lbs/ctn Indicator 12 Gauge Lighted

14 GAUGE POWER CORDS

Vinyl extension cords - 14 gauge. Vinyl cords are abrasion and moisture resistant. They feature durable, molded ends.14/3 Gauge, 100’ Single Outlet #EXT 100 14/3...... 100’ extension cord...... 6/ctn...... 61 lbs/ctn USA MADE

14 Gauge

GFCI & TRIPLE TAP ADAPTER

2’ GFCI Power Block, Triple Tap, Power Indicator Light, 12/3 guage, Power 120V, SJEOW. For use in minus 67° F weather. Indicator Lighted USA MADE #EXT LT-GFCI...... 6/ctn...... 8 lbs/ctn

#EXT LT-GFCI 2’ Lighted Triple Tap Adapter, 12/3 guage, SJEOW, 600V Polar cord for use in minus 67° F weather. #EXT 3ADPT-LTPOLAR...... 12/ctn...... 12 lbs/ctn

#EXT 3ADPT-LTPOLAR

Inexpensive Triple Tap Adapter #EXT 3ADAPTER Power Indicator #EXT 3ADAPTER...... 1/ctn Lighted

REPLACEMENT EXTENSION PLUG ENDS

Available in male or female ends.

#EXT PLUG REPL-F...... Female...... 20/ctn...... 3 lbs/ctn #EXT PLUG REPL-F...... Male...... 20/ctn...... 2 lbs/ctn

The Brush Man, LLC www.brushman.com [email protected] PAGE: 35 ROOFING SPRAY PAINT A professional grade roof paint that closely matches the original color of most roofing materials. Seamlessly blend the appearance of roofing accessories to asphalt shingles. ouch-upT scratches & abrasions before or after installation. Not for anodized aluminum. (12 cans/ctn, 13 lbs/ctn) Weathered Wood #PAINT-RF-WEA Benefits: USA MADE Cedar Fast dry. #PAINT-RF-CED Easy application. Hickory Closely matches original colors. #PAINT-RF-HIC Durable long-term protection. Charcoal Resists fading. #PAINT-RF-CHA Protects against rust and corrosion. Birchwood #PAINT-RF-BIR Excellent adhesion. Slate Gray #PAINT-RF-SLG Suggested Uses: Black • Flashing • Satellite Dishes #PAINT-RF-BLA • Vents • Window Frames White • Skylights • Siding #PAINT-RF-WHI • Chimney Caps • Gutters Tile Red #PAINT-RF-TIL

INVERTED WATER-BASED MARKING PAINT

A fast drying marking paint designed to be sprayed in an inverted position. Uses a patented technology to cut the environmental impact in half (as compared to a standard solvent based marking paint). Produces vivid marks, does not clog, and is safe for grass. Meets APWA color standards. 16 oz net weight.

USA MADE White Suggested Uses: #PAINT-MK-WHI • Utility marking • Construction sites Fluorescent Orange • Golf courses • Surveying #PAINT-MK-AO • Landscaping • Mining

BLACK ASPHALT ROOF PRIMER

Asphalt roof primer is a quick drying, asphalt-based material designed for priming surfaces prior to application of hot- mopped or cold-applied asphalt coatings, roof cements and asphalt-based roof and flooring adhesives. High penetrating qualities help assure a firm, tough bond. Specially designed for metal edging and flashings, weathered (composition) roofing, concrete and masonry surfaces and gypsum surfaces. 20-ounce aerosol can.

#PAINT-RF-PRIMER...... 12 cans/ctn...... 14 lbs/ctn • Excellent adhesion to concrete, wood, felt, gypsum, plastic, glass and metal. • Forms a tough waterproof seal that will trap dust & other loose particles. USA MADE • Creeps into cracks and crevices, then sets up and bonds to surfaces. • Provides rust proofing while filling surface pores. • Each application provides a smooth, even, protective film.

MARKING STICKS & LUMBER CRAYONS

Permanent, creamy, non-toxic waterproof marking sticks. Performs much better than ordinary crayons for marking surfaces. Try them - if not better than what you are using, send back the used stick and get a full credit! #MARKING STICK R...... Red...... 12/ctn...... 2 lbs/ctn Even marks #MARKING STICK W...... White...... 12/ctn...... 2 lbs/ctn under water!

Fade & weather-resistant lumber crayons. Other crayon colors Can be used on cardboard, ceramics, concrete, lumber, metal, paper, practically available - call us! anywhere. Special lead-free formulation provides permanent water-proof marking. #MARKING CRAYON R...... Red lumber crayon...... 12/ctn...... 2 lbs/ctn #MARKING CRAYON W...... White lumber crayon...... 12/ctn...... 2 lbs/ctn #MARKING CRAYON B...... Blue lumber crayon...... 12/ctn...... 2 lbs/ctn #MARKING CRAYON Y...... Yellow lumber crayon...... 12/ctn...... 2 lbs/ctn

The Brush Man, LLC www.brushman.com [email protected] PAGE: 36 CHALK REELS #CHALK REEL 100 100’ High speed, rapid rewind chalk line reel. Holds 4 oz. of chalk. Steel crank handle closes flush and locks to case. Ribbed sides of plastic case provide sure gripping. #CHALK REEL 100...... 100’...... 1/ctn...... 1 lb/ctn

100 ft Little Giant chalk reel. Holds almost 1 pound of chalk. One-piece crank for extra long life. #CHALK REEL G100...... 100’...... 4/ctn...... 5 lbs/ctn

‘G130’ 130 ft heavy duty cord in a giant orange case holding one pound of chalk. Heavy duty pull ring & heavy duty crank handle. #CHALK REEL G130...... 130’...... 4/ctn...... 8 lbs/ctn ‘G100’

Double Little Giant 110’ chalk reeels. Save time & energy walking back and forth to return the line. Each reel holds 12 ounces of chalk. #CHALK REEL G110D...... Dual 110’ reels...... 2/ctn...... 4 lb/ctn

CHALK REFILL

Size Color • Ultra-fine standard grade chalk. #CHALK 8R...... 8 oz ...... Red ...... 12/ctn...... 8 lbs/ctn • Brilliant color. #CHALK 8B...... 8 oz ...... Blue ...... 12/ctn...... 8 lbs/ctn • 4-5 strikes usual line yield. • Great flow for easy reel fill-up. #CHALK 8GO...... 8 oz...... Fluorescent Orange...... 12/ctn...... 8 lbs/ctn

#CHALK 105R...... 5 lb...... Red...... 4/ctn...... 23 lbs/ctn #CHALK 105B...... 5 lb ...... Blue...... 4/ctn...... 23 lbs/ctn #CHALK 105Y...... 5 lb...... Yellow...... 4/ctn...... 23 lbs/ctn Other chalk colors #CHALK 105GO...... 5 lb...... Fluorescent Orange...... 4/ctn...... 23 lbs/ctn available - call us!

TWISTED MASON TWINE

Twisted line is a fine choice for mason line and other marking needs. Choosing twisted line is often an economical choice - 10% more line per spool over braided. #TWINE-TW-250-O...... 275’ Reel...... ORANGE...... 12/ctn...... 5 lbs/ctn

Other colors available - special order.

BLUE PAINTER’S MASKING TAPE

Interior/exterior use - 14 day residue free USA MADE Other widths available - removal. Moisture and UV resistant. special order. #TAPE-MASK BM2...... 2” x 60 yards...... 24 rolls/ctn...... 14 lbs/ctn

GENERAL PURPOSE MASKING TAPE

General purpose masking tape. #TAPE-MASK 2...... 2” x 60 yards...... 24 rolls/ctn...... 14 lbs/ctn NEW

PACKAGING TAPE & DISPENSER

Packaging tape, clear, 1.8 mil. #TAPE-PKG...... 2” x 110 yds...... 36 rolls/ctn...... 20 lbs/ctn

Tape dispenser, 2” soft touch adjustable brake power dispenser. #TAPE-DISPENSER...... Retractable blade...... 1/ctn...... 1 lb/ctn

The Brush Man, LLC www.brushman.com [email protected] PAGE: 37 LEATHER GLOVES

Double palm, shoulder leather, 2-1/2” rubberized safety cuff. #GLOVE-2392...... Size large...... 72 pair/ctn...... 41 lbs/ctn

‘2392’ Select shoulder leather, gunn pattern, 2-1/2” rubberized safety cuff. #GLOVE-9466...... Size large...... 72 pair/ctn...... 31 lbs/ctn ‘9466’

Select shoulder leather, lined, knit wrist. #GLOVE-7140...... Size large...... 72 pair/ctn...... 25 lbs/ctn

Premium grain pig drivers, keystone thumb, unlined. ‘7140’ #GLOVE-4052L...... Size large...... 72 pair/ctn...... 25 lbs/ctn ‘4052L’

COTTON GLOVES - STRING KNIT

Polyester/cotton string knit, natural, reversible. ‘1202’ #GLOVE-1202...... Size large...... 300 pair/ctn...... 40 lbs/ctn

Natural string knit, PVC dots-both sides, reversible.

#GLOVE-5522...... Size large...... 240 pair/ctn...... 60 lbs/ctn ‘5522’

Natural string knit, polyester coating on fingers and palm. They outwear a leather glove. #GLOVE-8429...... Size X-tra large...... 240 pair/ctn...... 46 lbs/ctn

Upgrade from #GLOVE-8429 - OUTPERFORMS LEATHER GLOVES: Poly/cotton string knit shell, premium rubber coating on fingers and palm. ‘8429’ #GLOVE-8426L...... Size large...... 144 pair/ctn...... 35 lbs/ctn ‘8426L’ #GLOVE-8426XL...... Size X-tra large...... 144 pair/ctn...... 35 lbs/ctn (Special Order)

White cotton canvas, PVC one side, knit wrist, clute pattern. #GLOVE-5501...... Size large...... 300 pair/ctn...... 48 lbs/ctn

Brown jersey, knit wrist, clute pattern. ‘1845’ ‘5501’ #GLOVE-1845...... Size large...... 288 pair/ctn...... 31 lbs/ctn

Red-lined brown jersey, clute pattern. #GLOVE-4027...... Size large...... 144 pair/ctn...... 24 lbs/ctn

White cotton canvas, knit wrist, 8 oz. ‘4027’ #GLOVE-13011...... Size large...... 300 pair/ctn...... 36 lbs/ctn ‘13011’

CHEMICAL RESISTANT GLOVES - SUPPORTED

Black PVC, knit wrist, smooth finish, interlock lined. ‘8700’ #GLOVE-8700...... 72 pair/ctn...... 24 lbs/ctn

Black PVC, 14” length, single dipped, rough finish, interlock lined. #GLOVE-7714...... 72 pair/ctn...... 41 lbs/ctn

Black PVC right hand single glove only. Otherwise, same as #7714. Specially stocked for roofers when the left hand glove is not necessary for applying solutions. ‘7714’ #GLOVE-7714RHO.....RIGHT HAND ONLY...... 144 each/ctn...... 38 lbs/ctn SINGLE GLOVE - RIGHT HAND ‘7714RHO’ Other lengths and styles available.

The Brush Man, LLC www.brushman.com [email protected] PAGE: 38 CHEMICAL RESISTANT GLOVES - UNSUPPORTED

Seamless vinyl, general purpose, clear, disposable, lightly powdered. ‘1204DL’ Special order. #GLOVE-1204DL...... Large...... 100 ea/ctn, 10 ctn/cse...... 2 lbs/ctn ‘0001X’ #GLOVE-1204DX...... X-tra Large...... 100 ea/ctn, 10 ctn/cse...... 2 lbs/ctn

Seamless blue nitrile, 5mil, industrial grade, disposable, X-tra large, lightly powdered. #GLOVE-0001X...... 100 ea/ctn, 10 ctn/case...... 2 lbs/ctn

‘0392X’ Canners, unlined natural latex, 19 gauge, natural color, 12” length, pinked cuff, USDA accepted. #GLOVE-0392X...... Size 10...... 144 pair/ctn...... 37 lbs/ctn ‘0956X’

Canners, flock-lined, fully coated latex, 16 gauge, yellow, pinked cuff, diamond grip. #GLOVE-0956X...... Size 10...... 144 pair/ctn...... 26 lbs/case

Green nitrile, flock lined, textured palm, gauntlet cuff, 13” length, ‘0027L’ 16 gauge. #GLOVE-0027L...... Size Large...... 144 pair/ctn...... 29 lbs/case

WE CAN CROSS REFERENCE YOUR CURRENT GLOVE STOCK - CALL US!!

CHECK OUT THE MANY NEW ITEMS FEATURED IN THIS CATALOG!

Butyl Coated Drop Cloth Gray Sweatshirt Heavy Duty Seam Probe Page 22 Rags Page 31 Page 28 General Purpose Masking Tape Page 31

5-In-1 Scraper Tool Heavy Duty 9” Roller Page 32 Finishing Trowel Microfiber Roller Frame w/Wood Handle Page 27 Covers, Page 5 Page 6

Black Stiff Notched Coatings Squeegee, Page 10

Individual Black Nylon Zip Ties Band Page 24 New Industrial Clamps Brush Types, Page 7 Page 20

Aviation Snips, Page 33 Round Sash Brushes, Page 18

Now stocking select Rooftop Equipment Rollers & Vee Manifold!

4-1/2” Window Brush, Page 17 Heavy Duty Hook Knife Blades & Floor Scraper Blades, Page 32

Bowl Brush, Page 16

The Brush Man, LLC www.brushman.com [email protected] PAGE: 39 WEATHERPROOF FIRST AID KITS

Easy-to-use first aid kit is packaged in a practical weatherproof (gasketed) polypropylene case for durability and assists in complying with OSHA requirements.

#FIRST AID-15...... 15-person first aid kit...... 1 kit/ctn...... 2 lbs/ctn #FIRST AID-25...... 25-person first aid kit...... 1 kit/ctn...... 2 lbs/ctn

Each kit contains: • Adhesive Bandages • First Aid Instructions • Large Wound Pad (25 person) • Gauze Pads • Eye Pads • Adhesive Tape • Triangular Bandages • Antiseptic Towelettes • First Aid/Burn Cream (25 person) • Aspirin • Elastic Bandages • Cold Pack • Scissors • Latex Exam Gloves • Forceps

WASP SPRAY

Wasp & hornet killer - Powerful, fast-acting formula.

#WASP SPRAY...... Wasp & hornet killer...... 12 cans/ctn...... 16 lbs/ctn

• Effective on wasps, yellow jackets, hornets and bees. • Formula contains Tetramethrin and Permethrin to deliver maximum insect killing power. USA MADE • Shotgun-type blast. • Non-flammable and electronically non-conductive to 47,000 volts.

SAFETY VESTS

100% polyester mesh safety vest with reflective stripes. Velcro front closures and elastic side straps. Meets MUTCD requirements. #SAFETY VESTORG...... Dayglow Orange...... 1/ctn...... 1 lb/ctn #SAFETY VESTLIM...... Lime...... 1/ctn...... 1 lb/ctn

SAFETY HARNESS KIT This kit meets or exceeds current ANSI standards & OSHA requirements. Fall Protection - Roofers Kit. 5 gal. pail of fall protection.

#ROOFERS KIT...... 1/bucket...... 18 lbs/bucket

Each kit contains: • Universal harness with 5 points of adjustment for added comfort. • 50’ vertical lifeline assembly. Includes 50’ of heavy duty 5/8” poly rope with shock pack, permanently attached positioning device with 18” lanyard extension to keep device within reach. • Tempered reusable roof anchor (fits up to a 12/12 roof pitch). • 5 gal. plastic storage bucket w/lid.

KNEE PADS

Heavy duty knee pads, top grain cowhide outer shell, comforable 1/2” thick waterrepellent felt lining. Riveted for extra strength. Leather strap with metal buckle. #KNEE PAD-ONE...... 1 pair/ctn...... 2 lbs/ctn

Non-skid knee pads, features large white nylon (Dupont Cordura) caps to reduce marking. 1/2” thick foam rubber interior. Buckle fastening system. #KNEE PAD-TWO...... 1 pair/ctn...... 2 lbs/pair

#KNEE PAD-ONE #KNEE PAD-TWO

The Brush Man, LLC www.brushman.com [email protected] PAGE: 40 TYPE 1 FUEL CANS &

Type 1, Eagle red metal gas container. 1, 2, & 5-gallon gas cans now INCLUDE #GAS-1 GAL...... 1 gallon...... 1/ctn...... 5 lbs/ctn 1, 2, & 5-gallon #GAS-FUNNEL gas cans now 9” long funnel. #GAS-2 GAL...... 2 gallon...... 1/ctn...... 6 lbs/ctn INCLUDE USA MADE #GAS-5 GAL...... 5 gallon...... 1/ctn...... 7 lbs/ctn #GAS-FUNNEL 9” long funnel

Type 1, Eagle yellow metal diesel container. #DIESEL-5 GAL...... 5 gallon...... 1/ctn...... 7 lbs/ctn

Type 1, Eagle blue metal kerosine container. #KEROSINE-5 GAL...... 5 gallon...... 1/ctn...... 7 lbs/ctn

9” long funnel for type 1, Eagle containers listed above. #GAS-FUNNEL...... 6/ctn...... 3 lbs/ctn

DANGER / CAUTION TAPE

DANGER DANGER DANGER DANGER DANGER DANGER DANGER DANGER USA MADE Red ‘DANGER’ tape, black letters. #TAPE DANGER300...... 3” x 300’...... 16 rolls/ctn...... 14 lbs/ctn #TAPE DANGER1000..... 3” x 1,000’...... 10 rolls/ctn...... 19 lbs/ctn

CAUTION CAUTION CAUTION CAUTION CAUTION CAUTION CAUTION CAUTION Other wordings & Yellow ‘CAUTION’ tape, black letters. lengths available! Special Order #TAPE CAUT10002M...... 2-Mil, 3” x 1,000’...... 10 rolls/ctn...... 19 lbs/ctn

TRAFFIC CONES - HEAVY DUTY BLACK BASE PREVENTS TIPPING

All vinyl construction assures flexible yet rugged durability. High visibility.

#TRAFFIC-CONE 18 ...... 18” orange vinyl traffic cone...... 10/ctn...... 40 lbs/ctn #TRAFFIC-CONE-28 ...... 28” orange vinyl traffic cone...... 5/ctn...... 35 lbs/ctn

Cones with reflective tape also available!

39” WARNING LINE DIVERTER

39” trimline channelizer designed for service in a wide variety of applications. USA MADE High-impact, low-density polyethylene with reinforced easy-grip loop handle, 30# rectangular base. #SAFETY-DIV-CONE...... 30/pallet...... 1,050 lbs/pallet Meets OSHA requirements! • Passes 16# horizontal pull test. • Break-Away Design • Stackable with or without base. • 39” high tie-off. • Has 2 mounting holes for warning lights & signs. • 46-1/4” overall height. • 30” x 14” base.

XTEND+CLIMB EXTENSION LADDERS

Pro Series ladders are perfect for the commercial contractor that • Integrated Carrying Handle requires the best tools for any job! • Non-Slip End Caps #LADDER-EXT-250...... ANSI Type 1 - 250 lbs...... 1/ctn...... 40 lbs/ctn • Aerospace Engineered 6061 Allow #LADDER-EXT-300...... ANSI Type 1A - 300 lbs...... 1/ctn...... 36 lbs/ctn • Ergonomic Thumb Release

NEW

The Brush Man, LLC www.brushman.com [email protected] PAGE: 41 3-PIECE RAIN SUIT & RAIN PONCHO

Full Cut Jacket With Detachable Bib Overalls Hood & Bib Overalls Storm fly front with zipper/snap buttons. 100% waterproof & non-conductive Bib pants with suspenders. High visibility safety yellow Electronically welded seams 35 mm Jacket Detachable hood & corduroy collar. Large reinforced flapped pockets . When ordering, fill in * with: Adjustable wrist and waist. “L” (large), “XL” (extra-large) or Ventilated underarm and back. “XXL” (extra-extra-large)

#RAIN-SUIT-*...... 3-piece rainsuit...... 10/ctn...... 31 lbs/ctn

1-Piece PVC Rain Poncho (Not shown.) 10mm 100% PVC poncho with detachable hood. Size: 52” x 80” #RAIN-PONCHO ...... SPECIAL ORDER...... 50/ctn...... 28 lbs/ctn

17” SLUSH BOOTS

Extra Wide, 17” High Over-The-Shoe Slush Boots.

#BOOT-SLUSH- *...... Slush boots...... 1 pair/ctn...... 6 lbs/ctn

• High Visibility Yellow • Heavy Cleated Sole • Adjustable Strap W/Buckle On Top

When ordering, fill in * with boot size. Sizes 12 through 17 available! (Note: A shoe size of 12 would normally be a size 13 boot.)

COVERALLS

White Tri-Tuff® coveralls. Outermost layers of spunbound polypropylene provide double protection for extra tough abrasion resistance. Middle layer film coating provides a barrier to splash and spray, dirt and small particles.

#COVERALL- *...... 25/ctn...... 8 lbs/ctn (Be sure to fill in * with L, XL, XXL when ordering!)

• White, 1.9 oz/sq. yd. • Protects from paint, grease, dust & dirt. • 3 layer - polypropylene/polyethylene/.polypropylene. • Zipper front. • Ideal for painting, staining, yard work, car repair, • Attached hood & boots. insulating, asbestos and lead abatement. • Elastic wrists. • Liquid-Resistant

Boot covers only. Non-conductive.

#COVERALL BOOTS...... 50 pair/bdl...... 2 lbs/bdl

RESPIRATORS

Respirator NV provides protection against certain non-oil based particles. Examples: Grinding, sanding, sweeping, bagging, woodworking, foundries, etc. ‘NV’ Respirator V has a patented one-way valve for easy exhalation and cool, dry comfort. Advanced electrostatically charged microfibers also make breathing easier and cooler.

#RESPIRATOR NV...... Particulate respirator...... 20/ctn (12 ctn/case)...... 1 lb/ctn #RESPIRATOR V...... Particulate respirator...... 10/ctn (12 ctn/case)...... 1 lb/ctn ‘V’

These particulate respirators both meet NIOSH 42 CFR 84 N95 requirements. TC-84A-1299

The Brush Man, LLC www.brushman.com [email protected] PAGE: 42 SAFETY GLASSES

Lightweight blue nylon frame, fully adjustable temples. One-piece polycarbonate lens with sideshields. Contemporary wrap-around design. Complies with ANSI Z87.1-1989 standards. Really low price! #SG-ECONOMY-CL...... Clear lens...... 12/ctn...... 2 lbs/ctn #SG-ECONOMY-SM...... Smoke lens...... 12/ctn...... 2 lbs/ctn

Contemporary ratchet temples combined with non-slip rubber head grips. Lightweight wrap-around lens for the latest styling. Complies with ANSI Z87.1-1989 standards. Black frame. #SG-RATCHET-CL...... Clear lens...... 12/ctn...... 2 lbs/ctn #SG-RATCHET-SM...... Smoke lens...... 12/ctn...... 2 lbs/ctn

Oval design - The ‘cool’ look! Ultra-lightweight, strong scratch-resistant polycarbonate. Stylish protection! Complies with ANSI Z87.1-1989 standards. #SG-OVAL-CL...... Clear lens...... 12/ctn...... 2 lbs/ctn #SG-OVAL-SM...... Smoke lens...... 12/ctn...... 2 lbs/ctn

GOGGLES

Clear vinyl goggles with indirect venting. Fogless polycarbonate lens to fit any work environment. Features include an elastic headband for firm fit and a clear frame for excellent front and peripheral vision. Complies with ANSI Z87.1-1989 standards. #GOGGLE 300...... 12/ctn...... 3 lbs/ctn

SPRAY SOCK

100% cotton spray sock, approximately 6” wide x 8” long, curved bottom and top, face and bottom stitching. NEW #SPRAY SOCK FB...... 12/bag...... 1 lb/bag

HARD HAT

Tough polyethylene shell. Strong, lightweight and durable. Each hard hat features an adjustable nylon suspension for shock absorbing protection. Reinforced ribs on top provide additional impact protection. Each hard hat has slotted sides to accommodate accessories. Available in many other colors, also. Ratchet Suspension - Deluxe - Meets ANSI Z89.1 1997 Type 2 Class C, G & E

#HARD HAT RS-W...... White...... 12/ctn...... 15 lb/ctn Ratchet Style We will stock any color hard hat - just call us!

CAR COVERS (SPECIAL ORDER)

Protect vehicles on construction sites. Full panels. Elastic border conforms to car size. Double stitched seams for durability. White spun polypropylene. Lightweight and reusable.

12’ x 24’ Car Cover - FOR FULL OR MID-SIZE AUTO #CAR CVR 12X24WP...... 6/ctn...... 22 lbs/ctn 18’ x 24’ Car Cover - FOR VAN/CAMPER/TRUCK #CAR CVR 18X24WP...... 6/ctn ...... 32 lbs/ctn

The Brush Man, LLC www.brushman.com [email protected] PAGE: 43 WET MOP HEADS

Cotton Mop Heads Our mop heads are made of highly absorbent, long-wearing cotton. They are full size, 8-ply with 1” headbands. #MOP C16...... Full 16 oz 8-ply mop head...... 12/ctn...... 13 lbs/ctn #MOP C20...... Full 20 oz 8-ply mop head...... 12/ctn...... 16 lbs/ctn #MOP C24...... Full 24 oz 8-ply mop head...... 12/ctn...... 18 lbs/ctn #MOP C32...... Full 32 oz 8-ply mop head...... 12/ctn...... 27 lbs/ctn

Layflat Style Mop Heads & Handle Layflat style mop heads. #MOP R32LF

#MOP C24LF...... 24 oz - cotton...... 12/ctn...... 20 lbs/ctn #MOP C24LF ...... 12/ctn...... 24 lbs/ctn #MOP R32LF 32 oz - rayon #MOP HDLE 60LF Layflat style mop handle. 1-1/8” x 60 hardwood, for screw-on mop heads. #MOP HDLE 60LF...... 12/ctn...... 17 lbs/ctn

Cotton Deck Mop

32 oz. cotton deck mop with 1-1/8” diamter handle. #MOP DM32 #MOP DM32...... 32 cotton deck mop...... 6/bdle...... 22 lbs/bdle

Microfiber Yarn Wet Mops

These mops are all new! They consist of the standard Advantages of micro fiber mops over existing wet mops: head band/tail band mop construction but replaces • 4-5 times more absorbent - this means • Anti-microbial construction. the old standard cotton or poly yarn with a micro fiber fewer trips to the bucket. • No smell - won’t go sour. yarn - a new material for the American market. It is • Better particle pick up due to the 1,000’s of • High tolerance for cleaning chemicals. highly absorbent (up to 10 times its weight in water), ‘fingers’ - cleans better. with excellent cleaning characteristics. Micro fiber • Leaves the floor drier - this means safer • Lighter - our 16 oz micro fiber mop will pick floors. uses 1,000’s of tiny ‘fingers’ to attract and hold water up more water than a 24 oz cotton mop. • No ‘break-in’ period. and/or dirt. It will clean most floors without • Launderable - up to 200 times - this means • Quick change of mop refills. chemicals - using the mechanical principles just it’s a very inexpensive mop. mentioned. Light, launderable, highly chemical • Lint free. tolerant and will last a long time. No yarn string mop will leave the floor drier - a major consideration for floor care and safety. Streaking is also eliminated.

#MOP MF-10...... 10 oz (Gold Band)...... 48/ctn...... 30 lbs/ctn #MOP MF-16...... 16 oz (Blue Band) (Shown)...... 24/ctn...... 24 lbs/ctn #MOP MF-22...... 22 oz (Red Band)...... 24/ctn...... 33 lbs/ctn

WET MOP HANDLES

STATE-OF-THE-ART quick-release mop handle. Just squeeze the side lever to release #HM-QC-4505 the bar which holds the mop and the used mop will drop out. There is no quicker way #HM-QC-4423 to change a mop! Good for mops from 12 oz to 26 oz. 15/16” x 54” metal handle. #HM-QC-4505...... 12/ctn...... 15 lbs/ctn

This plastic quick-change is lighter than the metal version and will look the same after years of use! This connector also has a bar that swings out for a quick change of wet mops. Holds any size mop! 15/16” x 54” metal handle. #HM-QC-4423...... 12/ctn...... 19 lbs/ctn #HM-QC-4544 Industry standard galvanized quick-change mop handle. Bottom bar swings out of the way to allow for a quick change of wet mops. Holds any size mop and is connected to a sturdy vinyl-coated metal handle with 2 rivets. 15/16” x 54” handle. #HM-QC-4920 #HM-QC-4544...... 12/ctn...... 21 lbs/ctn

Wet mop handle with plastic ‘gripper jaws’ that close on the wet mop and hold it tight! Mop head can be removed without touching the mop - just turn the collar to open the jaws. Light, long-lasting & good for all size mops! 15/16” x 54” metal handle. #HM-QC-4920...... 12/ctn...... 19 lbs/ctn

1-1/8” x 54” yellow vinyl coated steel mop handle.

#HM63...... 12/ctn...... 30 lbs/ctn #HM63

The Brush Man, LLC www.brushman.com [email protected] PAGE: 44 STANDARD COTTON DUST MOPS

Standard looped-end cotton dust mop with snaps. #DM-CL-5X24...... 5” width x 24” length...... 12/ctn...... 12 lbs/ctn #DM-CL-5X36...... 5” width x 36” length...... 12/ctn...... 18 lbs/ctn

All lengths 12” - 72” as well as 3-1/4” & 5” widths available. Also available in colors (Green, Red, Blue or Orange). Cut end mops also available as well as disposable mops in any size - JUST ASK!

MICROFIBER DUST MOPS These mops are all new! They consist of the standard back snap attachment to standard dust mop frames but replaces the old standard cotton or poly yarn with a micro fiber yarn - a new material for theAmerican market. It has excellent cleaning characteristics. Micro fiber uses thousands of tiny ‘fingers’ to attract and hold water and/or dirt. It will clean most floors without chemicals - using the mechanical principles just mentioned. Light, launderable (200+ times), lint free and, by its very construction, anti-microbial. Won’t smell, has high chemical tolerance and will last a long time. No yarn dust mop will leave the floor cleaner. #DM-MF-5X24...... 5” width x 24” length...... 12/ctn...... 12 lbs/ctn #DM-MF-5X36...... 5” width x 36” length...... 12/ctn...... 18 lbs/ctn

DUST MOP FRAMES

#DM-FRAME-5X24...... 5” width x 24” length...... 12/ctn...... 12 lbs/ctn #DM-FRAME-5X36...... 5” width x 36” length...... 12/ctn...... 16 lbs/ctn

All lengths 12” - 72” as well as 3-1/4” & 5” widths available. We will stock what you need!

DUST MOP HANDLES

State of the art flexible dust mop connector - made from a space-age material. Indestructible #HDM-FLEX & allows easy turning of a dust mop when it hits an obstacle, then snaps rigtht back into place! Best for mops 24” or less. 15/16” x 60” handle. Flexible connector twists, #HDM-FLEX...... 12/ctn...... 19 lbs/ctn turns & snaps back into place!

Industry standard nylon slide dust mop connector. Clasps easily and quickly on to any standard dust mop frame. The white slide can be moved forward so the dust mop can’t swivel or left in position to allow the frame to swivel. Fitls all size frames. 15/16” x 60” handle. #HDM-CLAMP...... 12/ctn...... 19 lbs/ctn #HDM-CLAMP

Sign Up Now For... Email Newsletter Invoices By Email Keep informed of new items, Don’t wait for time-wasting special discounted items ‘snail mail’ for important or important product information accounting info. Get your by making sure you’re invoices sent by email the same subscribed! day your order ships.

The Brush Man, LLC www.brushman.com [email protected] PAGE: 45 ROOFING MOPS (ALL SPECIAL ORDER) Mop Size Material

Hank Style Roofing Mops USA MADE Hank Yarn #MOP RF-40-BD-HY...... 40 oz...... Blue Denim...... 24/ctn...... 60 lbs/ctn Roofing Mops #MOP RF-40-WC-HY...... 40 oz...... White Cotton Singles...... 24/ctn...... 60 lbs/ctn

Pin-Styyle Roofing USA MADE Pin Style Roofing Mops Mops #MOP RF-40-BD-PN...... 40 oz...... Blue Denim...... 24/ctn..... 60 lbs/ctn #MOP RF-48-BD-PN...... 48 oz...... Blue Denim...... 20/ctn..... 60 lbs/ctn #MOP RF-40-WC-PN...... 40 oz...... White Cotton Singles...... 24/ctn..... 60 lbs/ctn Screw-Style #MOP RF-FBGLS-PN..... 8 lb...... Fiberglass...... 5/ctn..... 42 lbs/ctn Roofing Mops

USA MADE Screw Style Roofing Mops - SPECIAL ORDER

#MOP RF-40-BD-SC...... 40 oz...... Blue Denim...... 24/ctn.....60 lbs/ctn Fiberglass Pin-Style Roofing Mops #MOP RF-40-WC-SC...... 40 oz...... White Cotton Singles...... 24/ctn.....60 lbs/ctn Fiberglass Ring-Style Roofing Mops USA MADE

Ring Style Roofing Mops

#MOP RF-FBGLS-RG...... 1 lb...... Fiberglass...... 50/ctn.....52 lbs/ctn

ROOFING MOP ACCESSORIES (ALL SPECIAL ORDER)

Roofing Mop Sleeves

Steel sleeve for hank-style mops. Use 4” staples show below. #MOP RF-SLV-HANK...... 12/ctn...... 8 lbs/ctn

Steel sleeve for pin-style mops. #MOP RF-SLV-PIN...... 12/ctn...... 13 lbs/ctn ‘SCREW’ ‘HANK’ ‘PIN’ ‘RING’ Steel sleeve for screw-style mops. #MOP RF-SLV-SCRW...... 12/ctn...... 12 lbs/ctn

Steel sleeve for ring-style mops. #MOP RF-SLV-RING...... 12/ctn...... 21 lbs/ctn

Roofing Mop Staples

4” staples for hank-style mops. #MOP RF-STAPLE-4 #MOP RF-STAPLE-4...... 100/ctn...... 4 lbs/ctn

ROOFING MOP HANDLES (ALL SPECIAL ORDER)

1-1/4” diamater hardwood roofing mop handles. #MOP HDLE 72WD...... 1-1/4” dia x 72” length...... 12/ctn...... 27 lbs/ctn

1-1/4” diamater aluminum roofing mop handles. USA MADE #MOP HDLE 72AL...... 1-1/4” dia x 72” length...... 12/ctn...... 28 lbs/ctn #MOP HDLE 96AL...... 1-1/4” dia x 96” length...... 12/ctn...... 34 lbs/ctn

The Brush Man, LLC www.brushman.com [email protected] PAGE: 46 ADJUSTABLE SHOCK CORDS

Fully adjustable shock cords - eliminates the need to over-stretch the cord. The adjustment also enables you to carry one size strap for many jobs. All adjustable straps are rated at over 50 lbs strength.

• Adjustable • UVI Protected • Nylon Outer Covering • Resists Cracking at -45° below zero!

#BUNGEE-NYLON-16...... 16” strap - adjusts from 0 - 24”...... 12/pack #BUNGEE-NYLON-24...... 24” strap - adjusts from 0 - 36”...... 12/pack #BUNGEE-NYLON-36...... 36” strap - adjusts from 0 - 54”...... 12/pack #BUNGEE-NYLON-48...... 48” strap - adjusts from 0 - 72”...... 12/pack

STRETCH WRAP

#STRETCH #STRETCH 18” x 1500’ stretch wrap, 3” core. We’ve tested many. This wrap WRAP 18 WRAP DISP really works! Try a case - if not convinced, return for full credit! #STRETCH WRAP 18...... 4 rolls/ctn...... 33 lbs/ctn

Stretch wrap dispenser. Adjusts for 12” - 18” wide film. Top tension control. Handle bent 33 degrees for easier bottom row wrapping. Foam cushion grip. Wide base reduces tip-over. USA MADE #STRETCH DISP...... 1 each/ctn...... 5 lb/ctn

White plastic handle for use with 18” stretch wrap. Requires two for each roll of stretch wrap. #STRETCHWRAP HDL...... 1 each/ctn...... 1 lb/ctn

5” x 1000’ stretch wrap, extended core on one end for use as a handle. #STRETCH WRAP 5 #STRETCH WRAP 5...... 4 rolls/ctn...... 8 lbs/ctn #STRETCHWRAP HDL

CLEANER / DEGREASER & CLEAN-UP HAND WIPES

Liquid Cleaner/Degreaser Liquid USA MADE Degreaser Aerosol Gel This all natural multi-purpose degreaser uses the cleaning ability of d’Limonene Degreaser fromorange peel extracts. It will remove heavy grease, grime, oils, tars and asphalt without harming most paints. Extremely heavy duty degreaser! #DEGREASER-LIQ-1...... 1 gallon (4 gal/ctn)...... 34 lbs/ctn

Citrus Cleaner/Degreaser Aerosol Gel USA MADE This thick, clinging and emulsifiable gel allows special penetrating agents to efficiently work on vertical and irregular surfaces. It puts the power of d’Limonene’s all-purpose citrus solvents directly where you need them the most. Flushes away quickly and easily with water. #AERO-GEL...... 12 cans/ctn...... 18 lbs/ctn Waterless Hand Citrus Waterless Hand Cleaner USA MADE Cleaner Formulated with nature’s own detergents - extracts from orange peels with mildly gritty pumice. Cuts through dirt and grease. Fortified with lanolin and special emolients to prevent redness and chapping. Rinsing with water is not necessary. Wipes clean with towel or rag. Contains no petroleum solvents. #CITRA-CLEAN-PT...... 1 pint (12 bottles/ctn)...... 16 lbs/ctn

Pre-Moistened Multi-Purpose Towels USA MADE Heavy duty multi-purpose towels. Removes even the toughest stains - grease, tar, ink, paint, permanent marker and other hard-to-remove soils. One-at-a-time dispensing. Environmentally friendly and gentle on hands. Contains lanolin, Multi-Purpose aloe vera & vitamin E. Kills germs. No water necessary. 10” x 12” wipes, Towels 90 towels/dispenser. Compare quantity and size of wipes of others! #CITRA-TOWELS...... 6 dispensers/ctn...... 23 lbs/ctn

The Brush Man, LLC www.brushman.com [email protected] PAGE: 47 Single Source Supplier For The Brush Man, LLC 602 W. Hickory Roofing Supply & Contractor Supply Mahomet, IL 61853 Industrial Supply, Janitor Supply PH: 800-274-6898 FX: 800-274-3369 USA Made www.brushman.com Products We sell nationwide [email protected] Look for the flag through distributors to indicate products that are ‘Made In The USA’! only!

Volume XL Celebrating 40 YEARS in 2016!