D084 FIRE RETARDANT UNDERWEAR

These garments have been designed to satisfy the need of workers who are at risk from heat and flames during Public Order Disturbances

These garments conform to EN531 protective clothing for industrial workers exposed to heat. They meet the requirements for Limited Flame Spread, Radiant Heat and Convected Heat.

Available, Male/Female Tops, Bottoms, Headovers,Gloves & socks. Deenside currently supply several Police Services and the HMP

In the design of this garment due respect has been paid to the basic health and safety requirements laid in annex II of the directive 89/686/EEC.

To maximise the life, appearance and flame retardant quality of this garment, it is essential that the following cleaning instructions be followed. This garment can be washed in conventional washing machines. It is recommended that a wash temperature of 40oc be used. The wash programme used should be that for delicates with normal spin and rinses. If drying in a tumble dryer use a low heat setting. The following washing powders may be used to launder this garment; , , , , Surf, Persil system automatic, non-bio and all supermarket detergent washing powders. Soap powders must not be used as they can mask the flame retardancy of the garment by depositing lime soaps, e.g. Acdo, Fairy Snow, Lux Soap Flakes and Persil Soap Powder. In addition, bleach should not be used when laundering this product. When stored in original packaging in controlled store room temperature, the life of this garment is four years.

Size Guide

Size Top ( Chest) Bottoms (Waist) Small 40” 28-32” Medium 42” 32-36” Large 44” 36-40” Extra Large 46” 40-44” Extra Extra Large 50” Length 31” as standard