DOCSLIB.ORG

Standards Available in Electronic Format (PDF) Page 1

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Standards Available in Electronic Format (PDF) Page 1 Standards available in electronic format (PDF) October 2019 SANS Number Edition Title SANS 1-2:2013 2 Standard for standards Part 2: Recognition of Standards Development Organizations (SDOs) in South Africa SATS 2:2012 1 The development of normative documents other than South African National Standards SANS 2:2013 7.01 Lead-acid starter batteries (SABS 2) SANS 4:2008 3.03 Locks, latches, and associated furniture for doors (SABS 4) (Domestic Type) SANS 11:2007 1.02 Unplasticized poly(vinyl chloride) (PVC-U) (SABS 11) components for external rainwater systems SANS 13:2008 2.03 Wax polish, solvent-based, for floors and furniture (SABS 13) SANS 14:1994/ISO 49:1994, IDT, Ed. 2 1 Malleable cast iron fittings threaded to ISO 7-1 (SABS ISO 49) SANS 15:2008 2.03 Wax emulsion polish for floors and furniture (SABS 15) SANS 16:2007/ISO/IEC 10116:2006, IDT, Ed. 3 2 Information technology - Security techniques - Modes of operation for an n-bit block cipher SANS 17:2014 1.01 Glass and plastics in furniture SANS 18-1:2003/ISO/IEC 10118-1:2000, IDT, Ed. 2 1 Information technology - Security techniques - Hash- functions Part 1: General SANS 18-2:2011/ISO/IEC 10118-2:2010, IDT, Ed. 3 2 Information technology - Security techniques - Hash- functions Part 2: Hash-functions using an n-bit block cipher SANS 18-3:2007/ISO/IEC 10118-3:2004, IDT, Ed. 3 2 Information technology - Security techniques - Hash- functions Part 3: Dedicated hash-functions SANS 18-4:2003/ISO/IEC 10118-4:1998, IDT, Ed. 1 1 Information technology - Security techniques - Hash- functions Part 4: Hash-functions using modular arithmetic SANS 19:2018 2 The inspection, testing and examination of mobile cranes SANS 20:2008 2.01 Primary zinc (SABS 20) SANS 21-1:2009/EN 115-1:2008, IDT, Ed. 1 1 Safety of escalators and moving walks Part 1: Construction and installation SANS 21-2:2016/EN 115-2:2010, IDT, Ed. 1 1 Safety of escalators and moving walks Part 2: Rules for the improvement of safety of existing escalators and moving walks SANS 22:2005 2.03 Glazed ceramic wall tiles and fittings (SABS 22) SANS 23-4:2003/EN 10223-4:1998, IDT, Ed. 1 1 Steel wire and wire products for fences Part 4: Steel wire welded mesh fencing Page 1 Standards available in electronic format (PDF) October 2019 SANS Number Edition Title SANS 24:2008 4.01 Soft solders (SABS 24) SANS 25:2008 2.01 Zinc alloy ingots for die-castings (SABS 25) SANS 26:2008 2.01 Zinc alloy die-castings (SABS 26) SANS 27:2008/EN 10202:2001, IDT, Ed. 2 2 Cold reduced tinmill products - Electrolytic tinplate (SABS EN 10202) and electrolytic chromium/chromium oxide coated steel SANS 28:2010 4.01 Metal ties for cavity walls (SABS 28) SANS 29:2011 4 Articles made of precious metals (SABS 29) SANS 31:2007/EN 10204:2004, IDT, Ed. 2 2 Metallic products - Types of inspection documents (SABS EN 10204) SANS 32:1997/EN 10240:1997, IDT, Ed. 1 1 Internal and/or external protective coatings for steel (SABS EN 10240) tubes - Specification for hot dip galvanized coatings applied in automatic plants SANS 38:2008 3.03 Metallic naphthenates for timber preservation (SABS 38) SANS 39:2006/ISO 407:2004, IDT, Ed. 3 2 Small medical gas cylinders - Pin-index yoke-type (SABS ISO 407) valve connections SANS 40:2009 2.03 Manually operated medium-vacuum sterilizers (SABS 40) (autoclaves) SANS 43:2008/ISO 540:2008, IDT, Ed. 4 2 Hard coal and coke - Determination of ash fusibility (SABS ISO 540) SANS 44:2009/ISO 544:2003, IDT, Ed. 3 2 Welding consumables - Technical delivery (SABS ISO 544) conditions for welding filler materials - Type of product, dimensions, tolerances and markings SANS 47:2014 3.02 Coal-tar type disinfectant liquids (black and white) (SABS 47) SANS 49:2011 3.02 Edible gelatin (SABS 49) SANS 50:2011/ISO 562:2010, IDT, Ed. 3 2 Hard coal and coke - Determination of volatile (SABS ISO 562) matter SANS 51:2008/ISO 580:2005, IDT, Ed. 3 2 Plastics piping and ducting systems - Injection- (SABS ISO 580) moulded thermoplastics fittings - Methods for visually assessing the effects of heating SANS 52:1981/ISO 622:1981, IDT, Ed. 1 1 Solid mineral fuels - Determination of phosphorus (SABS ISO 622) content - Reduced molybdophosphate photometric method SANS 53:2005/ISO 636:2004, IDT, Ed. 3 2 Welding consumables - Rods, wires and deposits (SABS ISO 636) for tungsten inert gas welding of non-alloy and fine- grain steels - Classification SANS 54:2016/ISO 188:2011, IDT, Ed. 5 3 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests Page 2 Standards available in electronic format (PDF) October 2019 SANS Number Edition Title SANS 58:2018 2.03 Coiled wire for automatic baling machines (SABS 58) SANS 61-1:2009/ISO 10245-1:2008, IDT, Ed. 2 2 Cranes - Limiting and indicating devices Part 1: General SANS 62-1:2013 3.03 Steel pipes Part 1: Pipes suitable for threading and (SABS 62-1) of nominal size not exceeding 150 mm SANS 62-2:2013 3.02 Steel pipes Part 2: Screwed pieces and pipe fittings (SABS 62-2) of nominal size not exceeding 150 mm SANS 63:2013 5.05 Blankets (SABS 63) SANS 68:2003/ISO 10282:2002, IDT, Ed. 2 1 Single-use sterile rubber surgical gloves - Specification SANS 70:2004 3 Conditioning of textiles and standard temperate (SABS SM 70) atmosphere for determining their physical and mechanical properties SANS 71:2010 1.01 Inspection and testing of vehicle hoists SANS 77:2008 3.03 Wooden handles for brooms, hay-forks, and rakes (SABS 77) (including general requirements for other wooden handles for tools) SANS 79:2004 4.01 Textiles - Mass per unit area of conditioned fabrics (SABS SM 79) SANS 80:2004 4 Mass (oven-dry plus conventional allowance) per (SABS SM 80) unit area of textile fabrics, free from non-fibrous material SANS 81:2004 3 Width of a textile fabric sample (SABS SM 81) SANS 82:2004 3 Width of a textile fabric in a piece or roll (SABS SM 82) SANS 83:2007 3 Length of a textile fabric sample (SABS SM 83) SANS 84:2005 4 Length of fabric in a piece or roll (SABS SM 84) SANS 85:2007 3 Thickness of wool fabrics (SABS SM 85) SANS 92:2008 5.01 Bituminous roofing felt (SABS 92) SANS 94-1:2003/EN 1492-1:2000, IDT, Ed. 1 1 Textile slings - Safety Part 1: Flat woven webbing slings, made of man-made fibres, for general purpose use SANS 94-2:2003/EN 1492-2:2000, IDT, Ed. 1 1 Textile slings - Safety Part 2: Roundslings made of man-made fibres for general purpose use SANS 95-1:2009/EN 840-1:2004, IDT, Ed. 2 1 Mobile waste containers Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices, dimensions and design Page 3 Standards available in electronic format (PDF) October 2019 SANS Number Edition Title SANS 95-2:2009/EN 840-2:2004, IDT, Ed. 2 1 Mobile waste containers Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and design SANS 95-3:2009/EN 840-3:2004, IDT, Ed. 2 1 Mobile waste containers Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design SANS 95-4:2009/EN 840-4:2004, IDT, Ed. 2 1 Mobile waste containers - Part 4: Containers with 4 wheels with capacity up to 1 700 l with flat lid(s), for wide trunnion or BGand/ or wide comb lifting device - Dimensions and design SANS 95-5:2009/EN 840-5:2004, IDT, Ed. 2 1 Mobile waste containers Part 5: Performance requirements and test methods SANS 95-6:2009/EN 840-6:2008, IDT, Ed. 2 1 Mobile waste containers Part 6: Safety and health requirements SANS 96:2018 1.01 Batch sampling and acceptance criteria for explosion-protected apparatus (EPA) SANS 97:2017 7.02 Electric cables - Impregnated paper-insulated metal- (SABS 97) sheathed cables for rated voltages 3,3/3,3 kV to 19/33 kV (excluding pressure assisted cables) SANS 98:2012 1.01 Ingredient labelling of cosmetic products SANS 99:2008 3 White chalks (SABS 99) SANS 101:2009 1.01 White metal designated WM 6 SANS 102:2009 1.01 White metal designated WM 15 SANS 103:2009 1.01 White metal designated WM 30 SANS 104:2009 1.01 White metal designated WM 40 SANS 105-A01:2010/ISO 105-A01:2010, IDT, Ed. 6 2 Textiles - Tests for colour fastness Part A01: (SABS ISO 105-A01) General principles of testing SANS 105-A02:1993/ISO 105-A02:1993, IDT, Ed. 4 1 Textiles - Tests for colour fastness Part A02: Grey (SABS ISO 105-A02) scale for assessing change in colour SANS 105-A03:1993/ISO 105-A03:1993, IDT, Ed. 4 1 Textiles - Tests for colour fastness Part A03: Grey (SABS ISO 105-A03) scale for assessing staining SANS 105-A08:2003/ISO 105-A08:2001, IDT, Ed. 1 1 Textiles - Tests for colour fastness Part A08: Vocabulary used in colour measurement SANS 105-B01:1994/ISO 105-B01:1994, IDT, Ed. 5 1 Textiles - Tests for colour fastness Part B01: Colour (SABS ISO 105-B01) fastness to light: Daylight SANS 105-B02:2016/ISO 105-B02:2014, IDT, Ed.
Load more

Recommended publications
  • Durham E-Theses
    Durham E-Theses An investigation into evolving support for component reuse Lavery, Janet How to cite: Lavery, Janet (1999) An investigation into evolving support for component reuse, Durham theses, Durham University. Available at Durham E-Theses Online: http://etheses.dur.ac.uk/4399/ Use policy The full-text may be used and/or reproduced, and given to third parties in any format or medium, without prior permission or charge, for personal research or study, educational, or not-for-prot purposes provided that: • a full bibliographic reference is made to the original source • a link is made to the metadata record in Durham E-Theses • the full-text is not changed in any way The full-text must not be sold in any format or medium without the formal permission of the copyright holders. Please consult the full Durham E-Theses policy for further details. Academic Support Oce, Durham University, University Oce, Old Elvet, Durham DH1 3HP e-mail: [email protected] Tel: +44 0191 334 6107 http://etheses.dur.ac.uk University of Durham Department of Computer Science M.Sc. Thesis An Investigation into Evolving Support for Component Reuse Janet Lavery 1999 The copyright of this thesis rests with the author. No quotation from it should 1)0 pulilishcd in any form, including Electronic and the Internet, without the author's prior written consent. All information derived from this thesis must he acknowledged appropriately. Abstract It is common in engineering disciplines for new product development to be based on a concept of reuse, i.e. based on a foundation of knowledge and pre-existing components familiar to the discipline's community.
    [Show full text]
  • Proposal to Represent the Unesco Thesaurus for the Semantic Web Applying Iso-25964
    1 PROPOSAL TO REPRESENT THE UNESCO THESAURUS FOR THE SEMANTIC WEB APPLYING ISO-25964 Juan-Antonio Pastor-Sánchez (1) (1) University of Murcia, Faculty of Communication and Documentation, [email protected] Abstract and ISO-THES with the properties of a vocabulary developed This paper shows how has been applied ISO-25964 standard in the context of UNESKOS project. The conclusions point, to represent the UNESCO thesaurus through semantic web among other aspects, a review of SKOS and adoption of ap- technologies. Based on the works done by the UNESKOS propriate technologies that facilitate the development of fu- project, has been analyzed the joint use of SKOS and ISO- ture works and research lines focused on the alignment of THES ontologies to represent thesauri according to the data vocabularies. model of the ISO-25964 standard. The result has been an Keywords: UNESCO Thesaurus; SKOS; Semantic Web; RDF dataset, accessible as Linked Open Data, using SKOS ISO-25964; ISO-THES; UNESKOS 1 Introduction working group are developing the ISO-THES ontology that complements SKOS and complains the properties Actually, SKOS is the most used ontology to represent of ISO-25964 for representing any kind of Thesaurus interoperables Knowledge Organization Systems in the (Isaac and De Smedt, 2015). Semantic Web (Pastor-Sánchez, et al., 2012). SKOS was developed in a first stage into the SWAD- The UNESKOS project exists since 2012 with the aim EUROPE project between 2002 and 2004. Finally was to offer SKOS versions of both, the Proposed Interna- adopted as W3C recommendation in 2009 (W3C, tional Standard Nomenclature for Fields of Science and 2009).
    [Show full text]
  • Evaluation of an Ontology-Based Knowledge-Management-System
    Information Services & Use 25 (2005) 181–195 181 IOS Press Evaluation of an Ontology-based Knowledge-Management-System. A Case Study of Convera RetrievalWare 8.0 1 Oliver Bayer, Stefanie Höhfeld ∗, Frauke Josbächer, Nico Kimm, Ina Kradepohl, Melanie Kwiatkowski, Cornelius Puschmann, Mathias Sabbagh, Nils Werner and Ulrike Vollmer Heinrich-Heine-University Duesseldorf, Institute of Language and Information, Department of Information Science, Universitaetsstraße 1, D-40225 Duesseldorf, Germany Abstract. With RetrievalWare 8.0TM the American company Convera offers an elaborated software in the range of Information Retrieval, Information Indexing and Knowledge Management. Convera promises the possibility of handling different file for- mats in many different languages. Regarding comparable products one innovation is to be stressed particularly: the possibility of the preparation as well as integration of an ontology. One tool of the software package is useful in order to produce ontologies manually, to process existing ontologies and to import the very. The processing of search results is also to be mentioned. By means of categorization strategies search results can be classified dynamically and presented in personalized representations. This study presents an evaluation of the functions and components of the system. Technological aspects and modes of opera- tion under the surface of Convera RetrievalWare will be analysed, with a focus on the creation of libraries and thesauri, and the problems posed by the integration of an existing thesaurus. Broader aspects such as usability and system ergonomics are integrated in the examination as well. Keywords: Categorization, Convera RetrievalWare, disambiguation, dynamic classification, information indexing, information retrieval, ISO 5964, knowledge management, ontology, user interface, taxonomy, thesaurus 1.
    [Show full text]
  • ISO/TC46 (Information and Documentation) Liaison to IFLA
    ISO/TC46 (Information and Documentation) liaison to IFLA Annual Report 2015 TC46 on Information and documentation has been leading efforts related to information management since 1947. Standards1 developed under ISO/TC46 facilitate access to knowledge and information and standardize automated tools, computer systems, and services relating to its major stakeholders of: libraries, publishing, documentation and information centres, archives, records management, museums, indexing and abstracting services, and information technology suppliers to these communities. TC46 has a unique role among ISO information-related committees in that it focuses on the whole lifecycle of information from its creation and identification, through delivery, management, measurement, and archiving, to final disposition. *** The following report summarizes activities of TC46, SC4, SC8 SC92 and their resolutions of the annual meetings3, in light of the key-concepts of interest to the IFLA community4. 1. SC4 Technical interoperability 1.1 Activities Standardization of protocols, schemas, etc. and related models and metadata for processes used by information organizations and content providers, including libraries, archives, museums, publishers, and other content producers. 1.2 Active Working Group WG 11 – RFID in libraries WG 12 – WARC WG 13 – Cultural heritage information interchange WG 14 – Interlibrary Loan Transactions 1.3 Joint working groups 1 For the complete list of published standards, cfr. Appendix A. 2 ISO TC46 Subcommittees: TC46/SC4 Technical interoperability; TC46/SC8 Quality - Statistics and performance evaluation; TC46/SC9 Identification and description; TC46/SC 10 Requirements for document storage and conditions for preservation - Cfr Appendix B. 3 The 42nd ISO TC46 plenary, subcommittee and working groups meetings, Beijing, June 1-5 2015.
    [Show full text]
  • FS209E and ISO Cleanroom Standards
    FS209E and ISO Cleanroom Standards Before global cleanroom classifications and standards were adopted by the International Standards Organization (ISO), the U.S. General Service Administration’s standards (known as FS209E) were applied virtually worldwide. However, as the need for international standards grew, the ISO established a technical committee and several working groups to delineate its own set of standards. FS209E contains six classes, while the ISO 14644-1 classification system adds two cleaner standards and one dirtier standard (see chart below). The "cleanest" cleanroom in FS209E is referred to as Class 1; the "dirtiest" cleanroom is a class 100,000. ISO cleanroom classifications are rated according to how much particulate of specific sizes exist per cubic meter (see second chart). The "cleanest" cleanroom is a class 1 and the "dirtiest" a class 9. ISO class 3 is approximately equal to FS209E class 1, while ISO class 8 approximately equals FS209E class 100,000. By law, Federal Standard 209E can be superseded by new international standards. It is expected that 209E will be used in some industries over the next five years, but that eventually it will be replaced internationally by ISO 14644-1. Airborne Particulate Cleanliness Class Comparison ISO 14644-1 FEDERAL STANDARD 209E ISO Class English Metric ISO 1 ISO 2 ISO 3 ISO 4 1 M1.5 ISO 5 10 M2.5 ISO 6 100 M3.5 ISO 7 1,000 M4.5 ISO 8 10,000 M5.5 ISO 9 100,000 M6.5 Airborne Particulate Cleanliness Classes (by cubic meter): CLASS Number of Particles per Cubic Meter by Micrometer Size 0.1 0.2 0.3 0.5 micron 1 micron 5 microns micron micron micron ISO 1 10 2 ISO 2 100 24 10 4 ISO 3 1,000 237 102 35 8 ISO 4 10,000 2,370 1,020 352 83 ISO 5 100,000 23,700 10,200 3,520 832 29 ISO 6 1,000,000 237,000 102,000 35,200 8,320 293 ISO 7 352,000 83,200 2,930 ISO 8 3,520,000 832,000 29,300 ISO 9 35,200,000 8,320,000 293,000 In cleanrooms, particulate concentration changes over time — from the construction and installation of equipment to its operational status.
    [Show full text]
  • Survey Concerning Citation Practices in Industrial Property Offices
    HANDBOOK ON INDUSTRIAL PROPERTY INFORMATION AND DOCUMENTATION Ref.: Examples and IPO practices page: 7.9.1.0 SURVEY CONCERNING CITATION PRACTICES IN INDUSTRIAL PROPERTY OFFICES Editorial note by the International Bureau 1. A survey “Citation Practices in Patent Offices” commissioned by the Standards and Documentation Working Group (SDWG) of the Standing Committee on Information Technologies (SCIT) in its fourth session, held in January 2004, was prepared by the Citation Practices Task Force (see document SCIT/SDWG/4/14, paragraph 78). The Task Force was convened to clarify the different practices by industrial property offices regarding the difficulties in citing specific parts of the description of the invention text in a patent document. 2. At its ninth session, held in February 2008, the SDWG approved (see document SCIT/SDWG/9/12, paragraph 30) the publication of the summary of responses to the survey “Citation Practices in Patent Offices” in Part 7 of the WIPO Handbook. Furthermore the SDWG mandated the Task Force to develop an extended survey questionnaire to further determine the citation practices of industrial property offices (see document SCIT/SDWG/9/12, paragraph 32). The extended survey prepared by the Task Force was issued as WIPO Circular C.SCIT 2651 on May 9, 2008. 3. The SDWG, at its tenth session, held in November 2008, approved (see document SCIT/SDWG/10/12, paragraph 47) the publication of “Citation Practices in Industrial Property Offices” in Part 7 of the WIPO Handbook, replacing the previous survey concerning “Citation Practices in Patent Offices”, which has been moved to the Archives. 4. The current document summarizes the results of the extended survey, the second version.
    [Show full text]
  • Report of Liaison to ISO Technical Committee 46 to IFLA Cataloguing
    Report of liaison to ISO Technical Committee 46 to IFLA Cataloguing Section, August 2019 Prepared by William Leonard, Chair Standards Council of Canada Mirror Committee to ISO TC46; IFLA CATS member ISO Technical Committee 46 Information and documentation scope: Standardization of practices relating to libraries, documentation and information centres, publishing, archives, records management, museum documentation, indexing and abstracting services, and information science. https://www.iso.org/committee/48750.html ISO TC 46 Information and documentation Current Projects: Working Group 2 Coding of country names and related entities (ISO 3166) Working Group 3 Conversion of written languages (transliteration standards) Working Group 4 and Ad Hoc Group Ongoing revision of ISO 5127:2017 Information and documentation – Foundation and vocabulary Working Group 13 Information Governance Joint TC 171/SC 2 - TC 42 - TC 46/SC 11 - TC 130 WG: Document management applications - Application issues - PDF/A Project recently completed: ISO 8:2019 Presentation and identification of periodicals (revision) News: The Swedish Institute for Standards (SIS) has been approved as the secretariat and chair for Subcommittee 10 Requirements for document storage and conditions for preservation. The project to revise the three parts of ISO 3166 Codes for the representation of names of countries and their subdivisions is currently in the Draft International Standard balloting stage. A ballot to introduce the Jyutping Romanization of Cantonese into the ISO suite of transliteration
    [Show full text]
  • Information Standards Quarterly Winter 2009, Vol 21, Issue 1
    INFORMATION STANDARDS QUARTERLY WINTER 2009 | VOL 21 | ISSUE 1 | ISSN 1041-0031 SPECIAL ANNIVERSARY EDITION: PART ONE NISO CELEBRATES 70 YEARS METADATa MIX AND MATCh UsinG STANDARDS TO TAME ERM PERFECTing sinGLE siGN-on AUTHENTicATion STATE OF THe STANDARDS & YEAR in REVIEW WWW.NISO.ORG/NEWS/EVENTS 2009 EVENTS JANUARY 2009 NISO Open Teleconferences January 14 - NISO Webinar: Digital Preservation: Current Efforts January 23–26 - NISO @ ALA Midwinter 2009 | Denver, CO Join NISO on these free conference calls to learn about new projects within NISO as well as to provide the organization FEBRUARY 2009 with feedback and input on areas where February 11 - NISO Webinar: Single Sign-On (SSO) Authentication NISO ought to be engaged. NISO teleconferences are held from 3-4 p.m. (eastern) on the second Monday of each MARCH 2009 month (excepting July and September). March 12–14 - NISO @ ACRL | Seattle, WA To join, simply dial 877-375-2160 and March 18- NISO Webinar: Data Movement and Management enter the code: 17800743. APRIL 2009 April 8 - NISO Webinar: KBART (Knowledge Base and Related Tools) and the OpenURL MAY 2009 May 6 - NISO/COUNTER Webinar: COUNTER: A How-To Guide May 13 - NISO/COUNTER Webinar: New Applications of Usage Data JUNE 2009 June 1 - Performance Measures and Assessment | Baltimore, MD June 10 - NISO Webinar: Interoperability Issues JULY 2009 July 10 - NISO/BISG Forum: The Standards Landscape | Chicago, IL - ALA Annual July 10–14 - NISO @ ALA Annual | Chicago, IL AUGUST 2009 August 12 - NISO Webinar: E-books SEPTEMBER 2009 September 9 - NISO Webinar: Licensing Introductory Issues/SERU OCTOBER 2009 October 12–13 - Library Resource Management Systems | Boston, MA 2009 Webinar subscription October 14 - NISO Webinar: MARC/RDA/Bibliographic Control packages are now available: Buy three webinars, get one free (www.
    [Show full text]
  • Harmoneerituks Tunnistatud Standardid
    12/2015 Ilmub üks kord kuus alates 1993. aastast Uued Eesti standardid Standardikavandite arvamusküsitlus Asendatud või tühistatud Eesti standardid Algupäraste standardite koostamine ja ülevaatus Standardite tõlked kommenteerimisel Uued harmoneeritud standardid Standardipealkirjade muutmine Uued eestikeelsed standardid ISSN 1406-0698 Avaldatud 03.12.2015 SISUKORD UUED, PEATATUD JA LÕPETATUD KOMITEED……………………………………………………..2 UUED STANDARDID JA STANDARDILAADSED DOKUMENDID ......................................... 3 ASENDATUD VÕI TÜHISTATUD EESTI STANDARDID JA STANDARDILAADSED DOKUMENDID ....................................................................................................................... 48 STANDARDIKAVANDITE ARVAMUSKÜSITLUS .................................................................. 69 TÕLKED KOMMENTEERIMISEL ........................................................................................ 104 ALGUPÄRASTE STANDARDITE JA STANDARDILAADSETE DOKUMENTIDE KOOSTAMINE ..................................................................................................................... 108 STANDARDITE JA STANDARDILAADSETE DOKUMENTIDE ÜLEVAATUS .................... 109 ALGUPÄRASTE STANDARDITE KEHTIVUSE PIKENDAMINE ......................................... 110 TÜHISTAMISKÜSITLUS ...................................................................................................... 111 TEADE EUROOPA STANDARDI OLEMASOLUST ............................................................. 113 UUED EESTIKEELSED STANDARDID JA STANDARDILAADSED
    [Show full text]
  • OWS-9 Reference Architecture Profile (RAP) Advisor Engineering Report
    Open Geospatial Consortium Approval Date: 2013-01-18 Posted Date: 2012-12-26 Publication Date: 2013-02-19 OGC 12-156 OGC URI: http://www.opengis.net/def/doc-type/per/OWS-9-RAP Category: Public Engineering Report Editor: George Percivall OGC® OWS-9 Reference Architecture Profile (RAP) Advisor Engineering Report Copyright © 2013 Open Geospatial Consortium. To obtain additional rights of use, visit http://www.opengeospatial.org/legal/. Warning This document is not an OGC Standard. This document is an OGC Public Engineering Report created as a deliverable in an OGC Interoperability Initiative and is not an official position of the OGC membership. It is distributed for review and comment. It is subject to change without notice and may not be referred to as an OGC Standard. Further, any OGC Engineering Report should not be referenced as required or mandatory technology in procurements. ® Document type: OGC Engineering Report Document subtype: NA Document stage: Approved for public release Document language: English OGC 12-156 Abstract The Reference Architecture Profiler (RAP) Advisor™ is a web based application that recommends OGC Standards and OGC Reference Model (ORM) Sections that are relevant to a system development; such that a community of interest could derive and build a profile of suitable OGC standards to meet their specific needs. This Engineering Report contains the requirements, conceptual design, development methodology, and implementation of the RAP Advisor. Initial development of the RAP Advisor™ was concurrent with the OGC Web Services Testbed, Phase 9 (OWS-9) with NGA sponsorship. During OWS-9 timeframe, key concepts of the RAP Advisor were confirmed through prototyping.
    [Show full text]
  • ISO Update Supplement to Isofocus
    ISO Update Supplement to ISOfocus October 2019 International Standards in process ISO/CD Agricultural and forestry tractors — Roll-over 12003-2 protective structures on narrow-track wheeled An International Standard is the result of an agreement between tractors — Part 2: Rear-mounted ROPS the member bodies of ISO. A first important step towards an Interna- TC 28 Petroleum and related products, fuels tional Standard takes the form of a committee draft (CD) - this is cir- and lubricants from natural or synthetic culated for study within an ISO technical committee. When consensus sources has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International ISO/CD 11009 Petroleum products and lubricants — Deter- Standard (DIS). The DIS requires approval by at least 75 % of the mination of water washout characteristics of member bodies casting a vote. A confirmation vote is subsequently lubricating greases carried out on a final draft International Standard (FDIS), the approval ISO/CD 13736 Determination of flash point — Abel closed-cup criteria remaining the same. method ISO/CD TR Petroleum products and other liquids — Guid- 29662 ance for flash point testing ISO/CD Lubricants, industrial oils and related prod- 12925-2 ucts (class L) — Family C (Gears) — Part 2: Specifications of categories CKH, CKJ and CKM (lubricants open and semi-enclosed gear systems) CD registered TC 29 Small tools ISO/CD 525 Bonded abrasive products — General requirements Period from 01 September to 01 October 2019 ISO/CD 5743 Pliers and nippers — General technical These documents are currently under consideration in the technical requirements committee.
    [Show full text]
  • ZMLUVA Uzatvorená Podľa§ 269 Ods
    ZMLUVA uzatvorená podľa§ 269 ods. 2 zákona č. 513/1991 Zb. Obchodný zákonník v znení neskorších predpisov Čl. 1 ZMLUVNÉ STRANY 1 .1 . Objednávateľ : MINISTERSTVO SPRAVODLIVOSTI SR Sídlo: Župné námestie 13, 813 11 Bratislava V zastúpení: JUDr. Ľubomíra Vrobelová – vedúca služobného úradu IČO: 00166073 DIČ: 2020830196 Bankové spojenie: Štátna pokladnica Číslo účtu: (ďalej len „Objednávateľ“) 1 .2 . D odá va t e ľ : He wl e t t - Packard Slovakia, s.r.o. S í d lo : G alv a ni h o 7, 820 02 Bratislava V zastúpení : Ing. Henrieta Kostková, konateľ IČO: 35 785 306 DIČ: SK2020213393 Bankové spojenie: Všeobecná úverová banka, a.s. Číslo účtu: Reg. číslo z Obch. registra: Okresný súd Bratislava I., oddiel Sro, vložka č. 21438/B tel. (+421) – 2 – 5752 5111 fax (+421) – 2 – 5752 5222 e-mail [email protected] (ďalej len „Dodávateľ“) (ďalej spolu len „zmluvné strany“) 1 Čl. 2 P R E A M B U L A 2.1. Zmluvné strany uzatvárajú túto zmluvu ako výsledok súťažného dialógu pre zákazku: „IT služby pre e-justice“ realizovanú podľa zákona č. 25/2006 Z. z. o verejnom obstarávaní a o zmene a doplnení niektorých zákonov v znení neskorších predpisov. 2.2. Zmluvné strany touto zmluvou upravujú základy/podmienky zmluvnej spolupráce v oblasti dodávky hardvéru a licencií (ďalej len „tovary“) a poskytovania služieb, ktoré tvoria predmet tejto zmluvy a podmienky budúceho zadávania a uzatvárania vykonávacích zmlúv. 2.3. Neoddeliteľnú súčasť tejto zmluvy tvoria tieto prílohy : a) Príloha č. 1, ktorá obsahuje výsledný opis predmetu zákazky/zmluvy; b) Príloha č. 2, ktorá obsahuje jednotkové ceny hardvéru a licencií a jednotkové ceny služieb.
    [Show full text]