Standards available in electronic format (PDF) October 2019 SANS Number Edition Title SANS 1-2:2013 2 Standard for standards Part 2: Recognition of Standards Development Organizations (SDOs) in South Africa SATS 2:2012 1 The development of normative documents other than South African National Standards SANS 2:2013 7.01 Lead-acid starter batteries (SABS 2) SANS 4:2008 3.03 Locks, latches, and associated furniture for doors (SABS 4) (Domestic Type) SANS 11:2007 1.02 Unplasticized poly(vinyl chloride) (PVC-U) (SABS 11) components for external rainwater systems SANS 13:2008 2.03 Wax polish, solvent-based, for floors and furniture (SABS 13) SANS 14:1994/ISO 49:1994, IDT, Ed. 2 1 Malleable cast iron fittings threaded to ISO 7-1 (SABS ISO 49) SANS 15:2008 2.03 Wax emulsion polish for floors and furniture (SABS 15) SANS 16:2007/ISO/IEC 10116:2006, IDT, Ed. 3 2 Information technology - Security techniques - Modes of operation for an n-bit block cipher SANS 17:2014 1.01 Glass and plastics in furniture SANS 18-1:2003/ISO/IEC 10118-1:2000, IDT, Ed. 2 1 Information technology - Security techniques - Hash- functions Part 1: General SANS 18-2:2011/ISO/IEC 10118-2:2010, IDT, Ed. 3 2 Information technology - Security techniques - Hash- functions Part 2: Hash-functions using an n-bit block cipher SANS 18-3:2007/ISO/IEC 10118-3:2004, IDT, Ed. 3 2 Information technology - Security techniques - Hash- functions Part 3: Dedicated hash-functions SANS 18-4:2003/ISO/IEC 10118-4:1998, IDT, Ed. 1 1 Information technology - Security techniques - Hash- functions Part 4: Hash-functions using modular arithmetic SANS 19:2018 2 The inspection, testing and examination of mobile cranes SANS 20:2008 2.01 Primary zinc (SABS 20) SANS 21-1:2009/EN 115-1:2008, IDT, Ed. 1 1 Safety of escalators and moving walks Part 1: Construction and installation SANS 21-2:2016/EN 115-2:2010, IDT, Ed. 1 1 Safety of escalators and moving walks Part 2: Rules for the improvement of safety of existing escalators and moving walks SANS 22:2005 2.03 Glazed ceramic wall tiles and fittings (SABS 22) SANS 23-4:2003/EN 10223-4:1998, IDT, Ed. 1 1 Steel wire and wire products for fences Part 4: Steel wire welded mesh fencing Page 1 Standards available in electronic format (PDF) October 2019 SANS Number Edition Title SANS 24:2008 4.01 Soft solders (SABS 24) SANS 25:2008 2.01 Zinc alloy ingots for die-castings (SABS 25) SANS 26:2008 2.01 Zinc alloy die-castings (SABS 26) SANS 27:2008/EN 10202:2001, IDT, Ed. 2 2 Cold reduced tinmill products - Electrolytic tinplate (SABS EN 10202) and electrolytic chromium/chromium oxide coated steel SANS 28:2010 4.01 Metal ties for cavity walls (SABS 28) SANS 29:2011 4 Articles made of precious metals (SABS 29) SANS 31:2007/EN 10204:2004, IDT, Ed. 2 2 Metallic products - Types of inspection documents (SABS EN 10204) SANS 32:1997/EN 10240:1997, IDT, Ed. 1 1 Internal and/or external protective coatings for steel (SABS EN 10240) tubes - Specification for hot dip galvanized coatings applied in automatic plants SANS 38:2008 3.03 Metallic naphthenates for timber preservation (SABS 38) SANS 39:2006/ISO 407:2004, IDT, Ed. 3 2 Small medical gas cylinders - Pin-index yoke-type (SABS ISO 407) valve connections SANS 40:2009 2.03 Manually operated medium-vacuum sterilizers (SABS 40) (autoclaves) SANS 43:2008/ISO 540:2008, IDT, Ed. 4 2 Hard coal and coke - Determination of ash fusibility (SABS ISO 540) SANS 44:2009/ISO 544:2003, IDT, Ed. 3 2 Welding consumables - Technical delivery (SABS ISO 544) conditions for welding filler materials - Type of product, dimensions, tolerances and markings SANS 47:2014 3.02 Coal-tar type disinfectant liquids (black and white) (SABS 47) SANS 49:2011 3.02 Edible gelatin (SABS 49) SANS 50:2011/ISO 562:2010, IDT, Ed. 3 2 Hard coal and coke - Determination of volatile (SABS ISO 562) matter SANS 51:2008/ISO 580:2005, IDT, Ed. 3 2 Plastics piping and ducting systems - Injection- (SABS ISO 580) moulded thermoplastics fittings - Methods for visually assessing the effects of heating SANS 52:1981/ISO 622:1981, IDT, Ed. 1 1 Solid mineral fuels - Determination of phosphorus (SABS ISO 622) content - Reduced molybdophosphate photometric method SANS 53:2005/ISO 636:2004, IDT, Ed. 3 2 Welding consumables - Rods, wires and deposits (SABS ISO 636) for tungsten inert gas welding of non-alloy and fine- grain steels - Classification SANS 54:2016/ISO 188:2011, IDT, Ed. 5 3 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests Page 2 Standards available in electronic format (PDF) October 2019 SANS Number Edition Title SANS 58:2018 2.03 Coiled wire for automatic baling machines (SABS 58) SANS 61-1:2009/ISO 10245-1:2008, IDT, Ed. 2 2 Cranes - Limiting and indicating devices Part 1: General SANS 62-1:2013 3.03 Steel pipes Part 1: Pipes suitable for threading and (SABS 62-1) of nominal size not exceeding 150 mm SANS 62-2:2013 3.02 Steel pipes Part 2: Screwed pieces and pipe fittings (SABS 62-2) of nominal size not exceeding 150 mm SANS 63:2013 5.05 Blankets (SABS 63) SANS 68:2003/ISO 10282:2002, IDT, Ed. 2 1 Single-use sterile rubber surgical gloves - Specification SANS 70:2004 3 Conditioning of textiles and standard temperate (SABS SM 70) atmosphere for determining their physical and mechanical properties SANS 71:2010 1.01 Inspection and testing of vehicle hoists SANS 77:2008 3.03 Wooden handles for brooms, hay-forks, and rakes (SABS 77) (including general requirements for other wooden handles for tools) SANS 79:2004 4.01 Textiles - Mass per unit area of conditioned fabrics (SABS SM 79) SANS 80:2004 4 Mass (oven-dry plus conventional allowance) per (SABS SM 80) unit area of textile fabrics, free from non-fibrous material SANS 81:2004 3 Width of a textile fabric sample (SABS SM 81) SANS 82:2004 3 Width of a textile fabric in a piece or roll (SABS SM 82) SANS 83:2007 3 Length of a textile fabric sample (SABS SM 83) SANS 84:2005 4 Length of fabric in a piece or roll (SABS SM 84) SANS 85:2007 3 Thickness of wool fabrics (SABS SM 85) SANS 92:2008 5.01 Bituminous roofing felt (SABS 92) SANS 94-1:2003/EN 1492-1:2000, IDT, Ed. 1 1 Textile slings - Safety Part 1: Flat woven webbing slings, made of man-made fibres, for general purpose use SANS 94-2:2003/EN 1492-2:2000, IDT, Ed. 1 1 Textile slings - Safety Part 2: Roundslings made of man-made fibres for general purpose use SANS 95-1:2009/EN 840-1:2004, IDT, Ed. 2 1 Mobile waste containers Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices, dimensions and design Page 3 Standards available in electronic format (PDF) October 2019 SANS Number Edition Title SANS 95-2:2009/EN 840-2:2004, IDT, Ed. 2 1 Mobile waste containers Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and design SANS 95-3:2009/EN 840-3:2004, IDT, Ed. 2 1 Mobile waste containers Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design SANS 95-4:2009/EN 840-4:2004, IDT, Ed. 2 1 Mobile waste containers - Part 4: Containers with 4 wheels with capacity up to 1 700 l with flat lid(s), for wide trunnion or BGand/ or wide comb lifting device - Dimensions and design SANS 95-5:2009/EN 840-5:2004, IDT, Ed. 2 1 Mobile waste containers Part 5: Performance requirements and test methods SANS 95-6:2009/EN 840-6:2008, IDT, Ed. 2 1 Mobile waste containers Part 6: Safety and health requirements SANS 96:2018 1.01 Batch sampling and acceptance criteria for explosion-protected apparatus (EPA) SANS 97:2017 7.02 Electric cables - Impregnated paper-insulated metal- (SABS 97) sheathed cables for rated voltages 3,3/3,3 kV to 19/33 kV (excluding pressure assisted cables) SANS 98:2012 1.01 Ingredient labelling of cosmetic products SANS 99:2008 3 White chalks (SABS 99) SANS 101:2009 1.01 White metal designated WM 6 SANS 102:2009 1.01 White metal designated WM 15 SANS 103:2009 1.01 White metal designated WM 30 SANS 104:2009 1.01 White metal designated WM 40 SANS 105-A01:2010/ISO 105-A01:2010, IDT, Ed. 6 2 Textiles - Tests for colour fastness Part A01: (SABS ISO 105-A01) General principles of testing SANS 105-A02:1993/ISO 105-A02:1993, IDT, Ed. 4 1 Textiles - Tests for colour fastness Part A02: Grey (SABS ISO 105-A02) scale for assessing change in colour SANS 105-A03:1993/ISO 105-A03:1993, IDT, Ed. 4 1 Textiles - Tests for colour fastness Part A03: Grey (SABS ISO 105-A03) scale for assessing staining SANS 105-A08:2003/ISO 105-A08:2001, IDT, Ed. 1 1 Textiles - Tests for colour fastness Part A08: Vocabulary used in colour measurement SANS 105-B01:1994/ISO 105-B01:1994, IDT, Ed. 5 1 Textiles - Tests for colour fastness Part B01: Colour (SABS ISO 105-B01) fastness to light: Daylight SANS 105-B02:2016/ISO 105-B02:2014, IDT, Ed.
Details
-
File Typepdf
-
Upload Time-
-
Content LanguagesEnglish
-
Upload UserAnonymous/Not logged-in
-
File Pages407 Page
-
File Size-