User manual Defender Smart Call HD2 Smart TV box and Skype camera for TV The device runs on the operating system Android General rules The user manual contains all the information about the security and instruction of proper usage. To avoid accidents and the device damage make sure that before use, you read the instruction carefully . Use and store the product at a room temperature and humidity. Do not drop the device. Do not disconnect the device when formatting or updating in process, it may cause operating error system. Do not disassemble the device. Do not clean it by alcohol, thinner and benzol. We reserve the right to upgrade and to modify the device. We take responsibility only for a guarantee on products. Users should care about the safety of their data in the device. We are not responsible for the loss of data. The product is not waterproof. The illustrations in the manual and the illustrations on your device can be different. I Appearance 1. On/off button 2. Camera 3. Backlight 4. Microphone 5. MicroSD slot 6. USB connector 7. mini-USB connector 8. Power supply connector 9. HDMI output 10. AV-out 11. Output for connecting headphones 1. On/off button. When connecting to the source the power, the device starts automatically. Hold button for 5 seconds to turn off or turn on the device. 2. Camera. Built-in HD camera 5 megapixel. 3. Backlight. Turnes on when using the camera in low light 4. Microphone. Built-in microphone with a unique noise reduction system is able to take sound at a distance of 3-5 m. 5. MicroSD slot. You can connect your device to a memory card (format microSD). 6. USB connector. You can connect external devices, flash card, mouse, keyboard, external hard drive, 3G modem, USB hub. 7. The mini-USB connector. You can connect to this connector the USB devices using USB-OTG (not included in the package). 8. The power supply connector. Used to connect the power supply. 9. HDMI connector. Output for connecting to TV using HDMI cable. 10. AV Connector. Output for connecting to the AV input on the TV. 11. Output for connecting headphones. Line out audio allows you to connect external speakers or headphones. II Start of work Connecting instructions Connect the device to the TV with HDMI cable. Connect the camera to the power supply. Tune the TV to the receive data mode via the HDMI port. If your TV does not have HDMI port, you can also use the AV port for connection. Secure Smart Call on the top of the TV or install it on any flat surface. To control the device, use the remote control Air-mouse, moving it in space. The remote control moving will move the mouse cursor on the screen . Before using the remote control, connect the receiver to the device USB connector (during transportation the receiver is under the battery cover). The remote control buttons have the following functions: To turn off the sound Smart Call On/off Move row selection up/down/right/left Go to home page Enter Left mouse button (select) Back Temporarily remote control Volume control disconnection You can also use a wireless mouse and keyboard to control. III Android operating system interface The choice of language. After first turning on the Smart Call will be work on English. To switch the other language, choose in the main window the Settings , in the opened application, select Language&input, in the opened right window select Language, scroll down the list of languages (hold down the OK button, move the remote down or up) till the item you need. After selecting this item, the Smart Call switch to your language. CONNECTING TO THE INTERNET All Smart Call functions is accessible only when connected to the network Internet. The main way of Smart Call connection to the Internet – connection via WiFi. To do this, go to "Settings" In the section "Wireless & networks" press the "Off" switch, it switches to the "On" position. On the right side of the screen will display the list of available WiFi networks. Select your home network and enter your password to access to your home Wi-Fi network using the onscreen keyboard. After connecting to the network the caption "Connected"appears under the network name. OPTIONALLY You can also connect Smart Call to a local network through the USB- RJ45 adapter (not included). Network settings for local area connection are in the section of settings "More" - "Ethernet". OTHER SETTINGS Sound – you can adjust the default volume, notifications ringtone, etc. Screen – the image setup, wallpapers. Settings of the font size. It is recommended to increase the font size when using a TV with large screen displays. In the section Screen Trimming, you can change the dimensions of the visible field. To change the screen resolution use item Display output mode. If you plan to watch the video in high resolution and your TV supports FullHD, it is recommended to switch the HDMI mode to 1080p 60Hz. Memory – information about using the internal memory of the device, and also SD cards and external media. Applications – you can manage applications (programs) installed on your device: stop, uninstall, move to SD card. Language & input – configure language settings and customize screen keyboards. MANAGE ICONS AND SCREENS Each programm installed in the system creates an icon (the icon on the screen), clicking on which executes the program. You can highlight any icon with the cursor by pressing on the remote OK button; if this button is held, the icons can be moved around the screen. To delete an icon, move it to the red mark “X”, it will be deleted. You can switch to the other operation screens, hold down the cursor by the OK button on any empty space of the screen and moving the remote right or left. The icons at the bottom of the screen have the following functions: Back button: press to return one step back. Home page: click to return to the main page. The “programm” button: click to see all running programs. To close unused program, drag it icon from the list right or left until the disappearance. Volume down: press to decrease the volume. Volume up: press to increase volume. Off button: press to turn the device off. The low right corner is the status bar, it shows the state of SD card, USB connection, time, Wi-Fi, download, etc. Click on the status bar, you will see a hidden menu. Click on the icon it will show more options. To see the all programs, installed on your device, click on the top right corner of the desktop the button Press and hold any icon to create a shortcut on the desktop. To move the widget to the desktop, select it on the tab Widgets IV SOFTWARE INSTALLATION REGISTRATION IN GOOGLE PLAY You can enjoy a huge number of free programs, offered by the online store Google Play. Start Google Play by clicking on the corresponding icon. To gain access to Google Play, you must create a Google account. If you don't have an account you can create it when you first start Google Play. To create a Google account: - run Google Play (the old name Play Market) - for the question "Add an existing account or create a new?", say "New" by clicking on the appropriate button -on the request "Your name is used to personalize your tablet PC and Google services"enter in appropriate fields first and last name with the help of on-screen keyboard. The keyboard automatically opens when you click in the text input field to enter text. To enter text, press the mouse cursor on the buttons with letters, numbers or other symbols. To change the input language, click on the button with the picture of globe next to the space bar. To enter numbers and special characters, press "123" in the bottom left. After entering the name or surname, press the Next button (the button in right like an arrow) - come up with a name for the new email address in the Latin alphabet (you can also use numbers and dots), e.g. ivanov.ivan and click the right arrow. The entered name will be checked. If this name is already taken, think of another, for example by adding date of birth - ivanov.ivan1955 and click Retry. If the second option is not suitable, the program will automatically prompt you not occupied names. To see it open a list "Click to to see options." Select a suitable option and press"Repeat" - a window will be opened "create a password". Use a password length of at least 8 characters and enter it in the Password field. After that enter this the password in the "retype the password". If both versions match, you can go to the next step by clicking the right arrow. If not, retype it in both fields without any errors and continue to the next step - a window will be opened "recovery Data". Here required the answer to the secret question, the answer which only you know, to if you forget your password, you can restore it. For example: "The name of a childhood friend". In the "Response" field enter the correct answer on a secret question. If you already have a personal email, enter it in the "Additional email address". If you do not have such address, then leave this field blank. Click on the right arrow - in the "Join Google+" window press "Not now" button to continue the registration - in the window "Create account" click the right arrow - in the "Authentication" window enter the text from the proposed to you image and click the right arrow - after saving your account, you will be prompted to enter the number of your Bank card.