A3PS Brochure 10 14.Indd

Total Page:16

File Type:pdf, Size:1020Kb

A3PS Brochure 10 14.Indd Rethinking Propulsion. Austrian Association for Advanced Propulsion Systems Imprint A3PS – Austrian Association for Advanced DI Wolfgang Kriegler Propulsion Systems Member of the Executive Board (Chairman) A3PS is a Public Private Partnership (PPP) between Dr. Andreas Dorda Austrian companies, R&D institutions and the Member of the Executive Board (Vice Chairman) Austrian Federal Ministry for Transport, Innovation and Technology (bmvit) promoting the development DI Dr.Walter Böhme and market introduction of alternative propulsion Member of the Executive Board (Treasurer) systems and energy carriers. Univ.Prof. DI Dr. Werner Sitte The representatives of the members form the general Member of the Executive Board (Vice Treasurer) assembly of the association. The general assembly elects the executive board of the association. DI Dr. Raimund Ratzi Member of the Executive Board (Secretary) ZVR.: 133482831, registered at Bundespolizeidirek - tion Wien, Büro für Vereins-, Versammlungs- und o.Univ.-Prof. DI Dr. Manfred Schrödl Medienrechtsangelegenheiten. Member of the Executive Board (Vice Secretary) DI Wolfgang Kriegler Managing Director Media owner and editor A3PS – Austrian Association for Advanced Design: Propulsion Systems Ergott Visual Communication Österreichische Plattform zur Förderung von Karl Schweighofergasse 12/6 innovativen Antriebssystemen und -technologien 1070 Vienna für mobile Anwendungen sowie deren web: www.ergott.at Energieversorgung und -speicherung Photos and figures: Tel.: +43-1-205 01 68-100 Members of A3PS, Shutterstock Fax: +43-1-205 01 68-110 E-Mail: [email protected] web: www.a3ps.at January 2015 Edition Content Page 4 Preface A3PS Members 6 Automotive Cluster Upper Austria 7 AIT Austrian Institute of Technology 8 Alset 9 AVL List 10 Bioenergy 2020+ 11 Biovest Consulting 12 CEST – Competence Centre for Electrochemical Surface Technology 13 FRONIUS International GmbH 14 HyCentA – Hydrogen Center Austria 15 JOANNEUM RESEARCH 16 KTM Sportmotorcycle 17 MAGNA STEYR 18 Miba Group 19 Montanuniversität Leoben – Chair of Physical Chemistry 20 OMV Aktiengesellschaft 21 RIC (Regionales Innovations Centrum) 22 TU Graz – Institute for Internal Combustion Engines and Thermodynamics 23 TU Graz – Institute of Chemical Engineering and Environmental Technology 24 TU Graz – Institute of Electrical Measurement and Measurement Signal Processing 25 TU Vienna – Institute for Powertrains and Automotive Technology 26 TU Vienna – Institute of Chemical Engineering 27 TU Vienna – Institute of Energy Systems and Electric Drives 28 VIRTUAL VEHICLE Research Center Rethinking Propulsion. 4 Preface Goals, structure and main focus areas of A3PS The development of advanced propulsion systems The goal of A3PS is to enforce R&D and innovation in and new energy carriers has become a key factor for the area of advanced propulsion systems and energy economic success in the automotive industry and the carriers as well as their storage for mobile applica- energy sector within the last years. Upcoming strin- tions. In order to introduce them on the market suc- gent limits especially for the greenhouse gas CO2, for cessfully, A3PS utilizes the following the emission of new pollutants such as fine dust, and the resulting inherent pressure for improvements in Objectives and Tasks energy efficiency are the main drivers for an increasing demand for research and development in this field. 3 Cooperation Regularly joint activities to enable cooperation and The Austrian automotive (supply) industry is an impor- common projects for member institutions. tant sector of the national economy as it accounts for 3 Networking over ten percent of Austria’s gross domestic product. Stimulating R&D co-operations embedding the Aus- In order to secure its competitiveness and to support trian industry and research institutions into new the successful market launch of innovative, advanced national and international value chains in leading propulsion systems, the associated components and positions. new energy carries, a close collaboration between the 3 Information automotive and energy supply industry complement- Strengthening the competence of Austrian enter- ed by an active technology policy became necessary. prises and research institutions by collecting, com- piling and disseminating information on advanced A3PS founded in 2006 propulsion systems and new energy carriers. Infor- mation for the public on the potentials and the state Therefore, the Austrian Federal Ministry for Transport, development of advanced propulsion systems. Innovation and Technology (bmvit) founded the Aus- 3 Competence Presentation trian Association for Advanced Propulsion Systems Presenting the Austrian technology competence to (A3PS) in 2006. national and international conferences and initia- tives. A3PS is a strategic public-private partnership (PPP) 3 Representation of Interests with the goal to support the research and develop- Supporting the representation of Austrian interests ment of advanced propulsion systems and their in international committees and initiatives of the EU energy carriers. A3PS enables a close cooperation and the IEA. between its two stakeholders: the ministry and the 3 Orientation industry together with research institutions, represent- Establishing a common view between industry, re- ed by the members of A3PS. search institutions and technology policy by devel- 5 www.a3ps.at oping a common strategy, roadmaps and position 3 excursions to international technology sites and papers for reinforcing technology development. potential partners 3 Advisory function 3 coordination of cluster initiatives (for example FCH Providing fact based consultancy and recommen- Cluster Austria) dations for policy makers to support the optimiza- 3 participation in the Implementing Agreements of the tion of their policy instruments (funding programs, IEA regulations, standards, public procurement, etc.) 3 marketing for Austrian technology competence and to inform the public of the opportunities and perspectives of these new technologies. A3PS 2015plus A3PS addresses all advanced drive train technologies Following the international trend of PPPs, A3PS will contributing to the improvement of energy effi ciency continue its success story within a new “industry-lead” and reduction of emissions (for example advanced phase. For that reason, in the future, the focus of the ICE technologies, hybrid-, battery electric- and fuel A3PS association will particularly strengthen the fol- cell vehicles as well as advanced fuel technologies lowing aspects: including bio fuels) and supports the whole innovation cycle (research, development, deployment). 3 service provision for A3PS members 3 effi ciently interlinking bmvit and A3PS members A3PS offers its members the following broad portfolio of 3 open platform for all propulsion and complementary technologies Activities 3 representation of the joint A3PS position to the public 3 creation of concerted technology roadmaps and The stakeholders of A3PS have the joint ambitious tar- position papers get to enforce the development of advanced propul- 3 technology foresight and assessment sion systems and its energy carriers. A3PS welcomes 3 analysis of international R&D strategies all interested Austrian, European and international 3 advisory service for members and the ministry institutions to join this cooperation on the way to a 3 organization of a yearly international conference cleaner and more effi cient mobility of the future. 3 organization of internal workshops 3 issue of subject-specifi c newsletter Wolfgang Kriegler 3 stimulation of research projects CEO & Chairman of the Board 3 studies, publications and articles 3 representation of members in international/Europe- an projects Rethinking Propulsion. 6 Automotive Cluster Upper Austria The Automotive Cluster (AC) is the largest company directly at the OEMs’ premises. Typically, these highly network of the Austrian automotive industry. Cluster efficient one-day-events are composed of in-house members operate in several sectors of the industry, expositions, complementary technical presentations ranging from the production of parts and assem- and various highlights. The Automotive Cluster puts blies to plant engineering, tool making and applied a lot of effort in the preparatory stages to ensure the research. Moreover, OEMs such as BMW, MAN, KTM, best possible matching of technological needs and BRP-Powertrain, CNH and Rosenbauer play an active solutions. part in the network. The majority of the cluster mem- bers are highly innovative companies of small and Shining Flagship Project on E-Mobility medium size. In 2010, the Automotive Cluster started the Clean Motion Offensive (CMO) – an e-mobility showcase project with twelve cluster members involved. The most popular developments in the area of compo- nents were related to the extension of reach and com- prised products like a biodiesel-range-extender and a flywheel. Another innovation highlight was a con- trol system that combined the advantages of different energy storages. Moreover, CMO partners were test- ing the suitability for daily use of inductive charging systems, and acquired a lot of experience with this new technology. A newly developed SEM box con- stantly analysed battery and vehicle data and thus helped improving battery lifetime. With regard to infra- structure, the CMO project focused on the develop- ment of two critical areas: user-friendly and cost effi- In addition to conventional networking and information cient systems as well as powerful
Recommended publications
  • Innovation and Quality for the International Automotive Industry
    Automotive Industry Austria Innovation and Quality for the International Automotive Industry www.investinaustria.at INVEST IN AUSTRIA AUTOMOtive INDustrY 3h All of Europe by Air in Just 3 Hours Helsinki Oslo Stockholm Tallinn 2h Riga Moscow Copenhagen Dublin Vilnius Minsk Amsterdam London Berlin Warsaw Brussels 1h Prague Kiev Paris Luxembourg Bratislava Vienna Berne Kishinev Budapest Ljubljana Zagreb Belgrade Bucharest Madrid Sarajevo Lisbon Pristina Podgorica Sofia Rome Skopje Tirana Ankara Athens Austria’s central location in the heart of Europe makes it the ideal East-West business hub. 2 Invest in Austria Contents 5 The Red-White-Red Automotive Powerhouse 8 The Way Innovations Get into Cars 11 AVL: On the Research-Based Path to Success 12 A Competitive Edge through Knowledge 14 The Cluster: A Success Model with a Future 16 High-Tech Suppliers with Savvy 20 Miba Group: Progress from Passion 22 Non-Stop Production 24 GM Invests in a New Engine Generation 27 The Best Contact Partner for Business Location Issues Editorial: April 2011 Owner&Publisher: Austrian Business Agency, Opernring 3, A-1010 Wien Editor-in Chief: René Siegl Associate Editor: Maria Hirzinger, Karin Schwind-Derdak Design: www.november.at Photos: ACstyria Autocluster GmbH, APA, AVL LIST GmbH, BMW Motoren GmbH, GM Powertrain-Austria, HyCentA Research GmbH, Infineon Technologies Austria AG, KTM-Sportmotorcycle AG, MAN Nutzfahr- zeuge Österreich AG, Miba AG, Schaeffler Austria GmbH, Julius Silver Print: Gugler 3 AUTOMOtive INDustrY Engine production at General Motors Powertrain-Austria. The automobile producer General Motors has put its faith in its Austrian facility since 1982. At that time the first Opel plant opened in Vienna-Aspern.
    [Show full text]
  • A N N U a L R E P O R T 2 0
    337337 Magna Magna Drive Drive Aurora,Aurora, Ontario, Ontario, Canada Canada L4G L4G 7K1 7K1 Telephone:Telephone:(905) (905) 726-2462 726-2462 Fax:Fax: (905) (905) 726-7164 726-7164 Internet:Internet:www.magna.com www.magna.com ANNUALANNUAL REPORT REPORT 2001 2001 PrintedPrinted in Canada in Canada PRODUCT AND SERVICES DIRECTORY MAGNA STEYR DECOMA INTERNATIONAL INC. INTIER AUTOMOTIVE INC. Advanced R&D Concept Development Front and Rear Bumper Systems Interior Systems Magna Engineering Center (MEC) Total Vehicle Program Management I Spoilers and Grilles (MIC, Paint or Bright) Cockpit Systems I Design, concept & development capability Systems Sequencing and Logistics I GOP Moldings & Nerf Strips I Cockpit Modules for complete interior Complete Niche Vehicle Assembly I Energy Management Systems I Instrument Panels I Latest CAD systems linked by I Front & Rear Bumper Fascias I Leather Covered IP secured network Complete Vehicle Manufacturing I Complete Front & Rear End Modules I Consoles I Technical Illustration I Complete Space Frames I Floor Consoles I Program Management I Full Frames Greenhouse Systems I Glove Boxes I Seven design offices close to our I Sub-Assemblies I Backlite Moldings I Air Duct Systems customers (Germany, Austria, U.K.) I Body-In-White I Belt & Windshield Moldings I PSIR Doors Magna International Inc. is a leading I Painting I Pillar Appliques Magna Automotive Testing (A2LA) MOMENTUMI Assembly & Sequencing I Vehicle Assembly I Door Surround Moldings I Safety, Structural, Fatigue, and Durability global supplier of technologically I CKD Manufacturing I Roof Drip Moldings Overhead Systems Testing for Body and Interior Systems I Cowl Screens I Complete Overhead System OEM Engineering and Complete Vehicle and I Vehicle Ride Simulation, Noise, NVH and advanced automotive components, I Window Surround Module I Headliner Substrates Systems Capability Road Load Data Acquisition I Sun Visors I Concepts and Designs Body Side Systems I Computer Aided Engineering, FEA, systems and modules.
    [Show full text]
  • Magna International Inc. (Exact Name of Registrant As Specified in Its Charter)
    United States Securities and Exchange Commission Washington, D.C. 20549 FORM 40-F ☐ REGISTRATION STATEMENT PURSUANT TO SECTION 12 OF THE SECURITIES EXCHANGE ACT OF 1934 OR ☒ ANNUAL REPORT PURSUANT TO SECTION 13(a) or 15(d) of THE SECURITIES EXCHANGE ACT OF 1934 For the fiscal year ended December 31, 2018 Commission File Number 001-11444 Magna International Inc. (Exact name of Registrant as specified in its charter) Not Applicable (Translation of Registrant’s name into English (if applicable) Province of Ontario, Canada (Province of other jurisdiction of incorporation or organization) 3714 (Primary Standard Industrial Classification Code number (if applicable) Not Applicable (I.R.S. Employer Identification Number (if applicable) 337 Magna Drive, Aurora, Ontario, Canada L4G 7K1 (905) 726-2462 (Address and telephone number of Registrant’s principal executive offices) Corporation Service Company, 1180 Avenue of the Americas, Suite 210 New York, New York 10036-8401 Telephone 212-299-5600 (Name, address (including zip code) and telephone number (including area code) of agent for service in the United States) Securities registered or to be registered pursuant to Section 12(b) of the Act. Title of each class Name of each exchange on which registered Common Shares New York Stock Exchange Securities registered or to be registered pursuant to Section 12(g) of the Act. None Securities for which there is a reporting obligation pursuant to Section 15(d) of the Act. None For annual reports, indicate by check mark the information filed with this Form: ☒ Annual Information Form ☒ Audited Annual Financial Statements Indicate the number of outstanding shares of each of the issuer’s classes of capital or common stock as of the close of the period covered by the annual report.
    [Show full text]
  • Automotive Industry and COVID-19: End of the Road
    Automotive industry and COVID-19: end of the road. The corona crisis has broken the very sophisticated supply chains in the automotive industry. Because of transport restrictions and closure of dealerships, it has almost become impossible to deliver cars to customers or for customers to order cars. Supply of components is also interrupted due to closure of plants for public health reasons (the accelerated rate of corona infections) or interrupted logistics. On top comes a general drop in demand: industrial production in the sector fell already by 12% in 2019. On the other hand, companies have announced to maintain the production of spare parts (crucial for public safety) and the R&D activities related to new powertrains. To deal with the consequences for the workers, most of the companies apply the nationally agreed conventions/rules on short-time work. COVID-19 has provoked an unprecedented crisis in the sector with an effective standstill of car production in Europe and a closed retail network. This will cause a dramatic negative demand shock. Vigorous measures will be needed to avoid plant closures and the permanent loss of jobs. Volkswagen - VW brand has suspended production at its German vehicle and component factories. VW plants in Pamplona (Spain), Setubal (Portugal) and Bratislava (Slovakia) are also closed. - Audi will stop production at its factories in Ingolstadt and Neckarsulm (Germany), Brussels, and Gyor (Hungary) by Monday, March 23 - Seat has halted its output - Skoda suspended production at its Czech plants for two weeks starting on Wednesday, March 18 - Lamborghini halted production in Italy - Porsche is stopping production for an initial period of two weeks, starting March 21 - Bentley is stopping production at its factory in Crewe, England, for four weeks starting March 21 - Due to shortage of supply from Europe, production is suspended in VW’s Russian factory in Kaluga and at the assembly line of VW’s contract manufacturer GAZ in Nizhny Novgorod PSA Group - PSA Group is closing its European factories until March 27.
    [Show full text]
  • Master Thesis Is Available at the Main Library of the Viennaprofessional University of Technolo Mbagy (
    Die approbierte Originalversion dieser Diplom-/Masterarbeit ist an der Hauptbibliothek der Technischen Universität Wien aufgestellt (http://www.ub.tuwien.ac.at). The approved original version of this diploma or master thesis is available at the main library of the ViennaProfessional University of Technolo MBAgy (http://www.ub.tuwien.ac.at/englweb/Automotive). Industry Service Innovation in the business relationship between Tier1 supplier and OEM – History, trends and impact on business model innovation A Master’s Thesis submitted for the degree of “Master of Business Administration” supervised by Dipl.-Ing., Dr. oec. Christoph H. Wecht, MBA Ing. Maria Stefan 1127145 Vienna, 25.01.2013 Acknowledgement I am pleased to thank Dr. Wecht, my thesis supervisor, for the support, valuable suggestions and feedback to my work. A special thanks to my beloved family, my colleagues and all those who have accompanied and encouraged me to develop myself, to gain as much as possible knowledge and experience. “Try not to become a man of success but rather as a man of value” Albert Einstein (1879-1955), Observer, January 15th 1950 “Genius is one percent inspiration, ninety-nine percent perspiration” Thomas A. Edison (1847-1931), Harper’s Monthly, 1932 1 Affidavit I, Maria Stefan, hereby declare 1. that I am the sole author of the present Master’s Thesis, “SERVICE INNOVATION IN THE BUSINESS RELATIONSHIP BETWEEN TIER1 SUPPLIER AND OEM – HISTORY, TRENDS AND IMPACT ON BUSINESS MODEL INNOVATION”, 87 pages, bound, and that I have not used any source or tool other than those referenced or any other illicit aid or toll, and 2.
    [Show full text]
  • 2015 Magna Steyr Peformance Report
    MAGNA STEYR GRAZ see the UPDATED PERFORMANCE REPORT WITH INTEGRATED ENVIRONMENTAL STATEMENT 2015 big picture MAGNA STEYR UPDATED PERFORMANCE REPORT WITH INTEGRATED ENVIRONMENTAL STATEMENT 2015 UPDATED PERFORMANCE REPORT WITH INTEGRATED ENVIRONMENTAL STATEMENT 2015 BUSINESS PERFORMANCE – BEING A PIONEER ENVIRONMENT – RESPONSIBLE PRODUCTION SOCIAL RESPONSIBILITY - GROWING TOGETHER COMPLIANCE – ACTIVELY ASSUMING RESPONSIBILITY 3 MAGNA STEYR MAGNA STEYR UPDATED PERFORMANCE UPDATED PERFORMANCE REPORT WITH INTEGRATED TABLE OF CONTENTS INTRODUCTION REPORT WITH INTEGRATED ENVIRONMENTAL STATEMENT 2015 ENVIRONMENTAL STATEMENT 2015 Table of contents INTRODUCTION ...................................................................................................... 05 Board statements on environmental report ................................................................. 06 THE COMPANY ....................................................................................................... 08 Magna Steyr Graz ................................................................................................. 09 Three million automobiles made in Graz ............................................................... 15 BUSINESS PERFORMANCE – BEING A PIONEER ................................................ 12 Innovation: the foundation for tomorrow’s success .............................................. 14 Example for frst implementation successes: Smart Labeling ............................... 15 The ideas of our employees are important to us! .................................................
    [Show full text]
  • Magna International, Inc Canada
    Magna International, Inc Canada The Challenge of Integration into Global Supply Chains Written by Charles Gastle Founding Partner Bennett Gastle Professional Corporation, Barristers & Solicitors and Heather Gastle1 The case was developed with the cooperation of Magna International solely for educational purposes as a contribution to the project entitled ―IPR Strategies for Emerging Enterprises — Capacity Building for Successful Entry to Global Supply Chain,‖ conducted under the auspices of the Asia-Pacific Economic Cooperation (APEC). The case is neither designed nor intended to illustrate the correct or incorrect management of the situation or issues contained in the case. Reproduction and duplication of this case for personal and educational use is encouraged. No part of this case however can be reproduced, stored, or used for purposes other than the above without the written permission of the author(s) and APEC. © 2010 APEC Secretariat 20 Canada Introduction In 2009 there was a limited number of major automobile manufacturers (OEMs) such as Ford, General Motors and Toyota, and the competition for their business was intense among the major autoparts suppliers. Innovation in the design of automotive parts and manufacturing processes was crucial to securing new contracts as automobile models changed and technology evolved. Innovation and design also played an important role in achieving the price milestones established in the contracts that existed ―at will‖ with the major OEMs, which meant that they were subject to cancellation at any time. An industry marked by constant innovation required special corporate processes to recognize an innovative idea that had value and to commercialize it. Magna International Inc. 2 (Magna) was the leading automobile parts manufacturer in North America with sales exceeding $20 billion.
    [Show full text]
  • BMW Group Pressclub Portal
    BMW Group Media information Press Kit BMW Group Production. 10/2014 Contents. Page 1 1. The BMW Group’s strategy: Production follows the market. ............................................. 2 2. Efficient production: Flexibility is the top priority. .................................................. 6 3. Business is people: Our employees drive our success. ........................................ 9 4. One for all – All for one: The BMW Group’s production network. .............................. 13 5. Automotive production: The BMW Group’s vehicle plants. ....................................... 15 6. Engines, components, contract production and motorcycles: The other sites in the BMW Group production network. ..... 20 7. Quality from the outset: How a car is made. ............................................................... 26 8. Sustainability is a given: Clean Production. ................................................................ 30 9. Truly one of a kind: What makes the BMW Group Production unique. ............... 40 10. Industry 4.0: The BMW Group’s vision of the production of the future. .... 46 11. Further information. ............................................................ 52 BMW Group Media information 1. The BMW Group’s strategy: 10/2014 Production follows the market. Page 2 The BMW Group aims at achieving balanced growth in all markets and on all continents. To this end, the BMW Group’s highly efficient, flexible and agile production network applies the principle of ‘production follows the market’. Thanks to its international alignment, the BMW Group Production operates full plants in key markets such as the NAFTA area, China or Europe, which produce vehicles for both the local market and the export. The company continuously monitors and analyzes market developments and customer demands. If trends are changing significantly, the BMW Group can react flexibly by taking the respective product and site decisions. At present, the BMW Group sees the emerging markets in Asia and the Americas as major growth drivers.
    [Show full text]
  • Austrian Association for Advanced Propulsion Systems Imprint
    A3PS-Members Rethinking Propulsion. Austrian Association for Advanced Propulsion Systems Imprint A3PS – Austrian Association for Advanced Propulsion Systems DI Dr. Michael Nöst, MBA The A3PS is the strategic partnership between the CEO, Member of the Executive Board (IESTA) Austrian technology policy, industry and research institutions. DI Hanno Miorini, MBA Chairman of the Executive Board (Bosch) The A3PS stimulates the development of advanced propulsion systems and energy carriers - to build DI Dr. Christian Chimani up common competence and to accelerate market Deputy Chairman of the Executive Board (AIT) launches. DI Roland Hintringer, MBA The A3PS addresses all advanced drive train Member of the Executive Board (Miba) technologies contribution to the improvement of energy efficiency and reduction of emissions DI Thomas Uitz supporting the whole innovation cycle (research, Member of the Executive Board (OMV) development, deployment). Media owner and editor A3PS – Austrian Association for Advanced Propulsion Systems Österreichische Plattform zur Förderung von innovativen Antriebssystemen und -technologien für mobile Anwendungen sowie deren Energieversorgung und -speicherung Phone: +43-1-205 01-68 100 Fax: +43-1-205 01-68 110 E-Mail: [email protected] Web: www.a3ps.at October 2019 Edition Design: badinger.cc Photos and figures: Members of A3PS, Shutterstock Content 4 Preface 6 ACstyria 7 Automotive Cluster Upper Austria 8 AIT Austrian Institute of Technology 9 ANDATA GmbH 10 AVL List GmbH 11 BEST – Bioenergy and Sustainable Technologies
    [Show full text]
  • Magna Steyr Case Study
    Automotive and transportation Magna Steyr Two bodyshell types built on the same line Product Automobile supplier uses digital Tecnomatix factory methods, integrates line and process planning, and Business challenges masters ambitious customer Shorten production line tasks planning time Global presence, complete Support a body-in-white, vehicle proficiency mixed production line; reduce The Austrian-Canadian enterprise Magna hardware cost by re-using International Inc. is one of the most tools efficient, brand-independent engineering Improve manufacturing and manufacturing partners for automo- process efficiency tive original equipment manufacturers Diminish down-time of a run- (OEMs). With about 70,000 employees in ning production line, while more than 242 production sites across 25 introducing a new car model countries, the supplier ranks among the sector’s champions. The company’s range of services includes development, engi- Keys to success neering and manufacturing of systems, Advanced planning methodol- assemblies and parts. Additionally, Magna ogy with Tecnomatix tools in International Inc. acts on-demand as an Part of bodyshell manufacturing at Graz site. a virtual environment OEM general contractor – a one-stop shop, from idea to complete vehicle highlight includes the entire development Integration of facility design development and assembly. Capabilities and production of the BMW X3® – one of and process planning include comprehensive production levels – the most comprehensive tasks undertaken Automated transition of data extra-low, low and high volume – as well by the automotive supplier. from product designers to as the ability to cater to special customer process planners requirements, or peak shaving. One line for two products Offline robot programming While the BMW X3 was still in production, The company’s current achievements – Magna Steyr was awarded the contract to reflected by Magna Steyr Fahrzeugtechnik build the MINI Countryman®.
    [Show full text]
  • Annual Report AODA
    2020 Annual Report Magna International Inc. Magna International Inc. 337 Magna Drive Aurora, Ontario Canada L4G 7K1 Telephone: (905) 726-2462 CORPORATE DIRECTORY Directors Executive Officers Aaron D. McCarthy Chief Human Resources Officer William L. Young Seetarama (Swamy) Kotagiri (Chair) Chief Executive Officer Eric J. Wilds Chief Sales & Marketing Officer Scott B. Bonham Vincent J. Galifi Peter G. Bowie Chief Financial Officer Uwe Geissinger Executive Vice-President, Mary S. Chan Tommy J. Skudutis Operational Efficiency Hon. V. Peter Harder Chief Operating Officer Sherif S. Marakby Seetarama (Swamy) Kotagiri Guenther F. Apfalter Executive Vice-President, President, Magna Europe and Asia Dr. Kurt J. Lauk Corporate R&D Robert F. MacLellan Bruce R. Cluney Anton Mayer Chief Legal Officer Cynthia A. Niekamp Executive Vice-President, Systems and Portfolio Strategy William A. Ruh Joanne N. Horibe Chief Compliance Officer Boris Shulkin Dr. Indira V. Samarasekera Executive Vice-President, Lisa S. Westlake Technology and Investments Corporate Office Transfer Agent and Registrar Exchange Listings Magna International Inc. Computershare Trust Company Common Shares 337 Magna Drive of Canada Toronto Stock Exchange MG Aurora, Ontario 100 University Avenue, 8th Floor New York Stock Exchange MGA Canada L4G 7K1 Toronto, Ontario, Canada M5J 2Y1 We see a future where everyone can live and move Telephone: (905) 726-2462 Telephone: 1 (800) 564-6253 without limitations. We are developing technologies, magna.com Computershare Trust Company N.A. systems and concepts that make vehicles safer 462 S. 4th Street and cleaner, while serving our communities, Louisville, Kentucky, USA, 40202 the planet and, above all, people. Telephone: 1 (800) 962-4284 From all other countries: Telephone: 1 (514) 982-7555 Forward.
    [Show full text]
  • Powerful Engine for the Automobile Industry
    Automotive Industry Austria Powerful Engine for the Automobile Industry www.investinaustria.at INVEST IN AUSTRIA AUTOMOTIVE INDUSTRY 3h All of Europe by Air in Just 3 Hours Helsinki Oslo Stockholm Tallinn 2h Riga Moscow Copenhagen Dublin Vilnius Minsk Amsterdam London Berlin Warsaw Brussels 1h Prague Kiev Paris Luxembourg Bratislava Vienna Berne Kishinev Budapest Ljubljana Zagreb Belgrade Bucharest Madrid Sarajevo Lisbon Pristina Podgorica Sofia Rome Skopje Tirana Ankara Athens Austria’s central geographic location in Europe makes it a business interface between East and West 2 INVEST IN AUSTRIA Dynamic Business Location As a business location, Austria offers companies attractive conditions, qualified specialized staff and a modern infrastructure. Austria ranks among the most prosperous and innovative countries in the European Union. According to Eurostat’s prosperity indicator, Austria is ranked second in the EU behind Luxembourg. The dynamic business location scores points thanks to its modern infrastructure, top-notch technologies, well-educated and highly-motivated employees. It also offers a high reliability of energy supplies in addition to political, social and economic stability. Moreover, Austria is the ideal East-West business interface with a central geographical location in Europe. The automobile and automotive supply industries rank among the leading industrial sectors in Austria, securing every ninth job in the country. In terms of labor produc- tivity Austria ranks among the top five in the EU, a competitive advantage which 700 companies in the sector already exploit. As a highly sought-after research and development location for an international clientele, Austria is considered to be an important driving force propelling the European automotive industry.
    [Show full text]