Advanced Concrete Technology

Total Page:16

File Type:pdf, Size:1020Kb

Advanced Concrete Technology Advanced Concrete Technology Advanced Concrete Technology Zongjin Li JOHN WILEY & SONS, INC. This book is printed on acid-free paper. Copyright 2011 by John Wiley & Sons, Inc. All rights reserved Published by John Wiley & Sons, Inc., Hoboken, New Jersey Published simultaneously in Canada No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, scanning, or otherwise, except as permitted under Section 107 or 108 of the 1976 United States Copyright Act, without either the prior written permission of the Publisher, or authorization through payment of the appropriate per-copy fee to the Copyright Clearance Center, 222 Rosewood Drive, Danvers, MA 01923, (978) 750-8400, fax (978) 646-8600, or on the web at www.copyright.com. Requests to the Publisher for permission should be addressed to the Permissions Department, John Wiley & Sons, Inc., 111 River Street, Hoboken, NJ 07030, (201) 748-6011, fax (201) 748-6008, or online at www.wiley.com/go/permissions. Limit of Liability/Disclaimer of Warranty: While the publisher and the author have used their best efforts in preparing this book, they make no representations or warranties with respect to the accuracy or completeness of the contents of this book and specifically disclaim any implied warranties of merchantability or fitness for a particular purpose. No warranty may be created or extended by sales representatives or written sales materials. The advice and strategies contained herein may not be suitable for your situation. You should consult with a professional where appropriate. Neither the publisher nor the author shall be liable for any loss of profit or any other commercial damages, including but not limited to special, incidental, consequential, or other damages. For general information about our other products and services, please contact our Customer Care Department within the United States at (800) 762-2974, outside the United States at (317) 572-3993 or fax (317) 572-4002. Wiley also publishes its books in a variety of electronic formats. Some content that appears in print may not be available in electronic books. For more information about Wiley products, visit our web site at www.wiley.com. Library of Congress Cataloging-in-Publication Data: Li, Zongjin, Dr. Advanced concrete technology / Zongjin Li. p. cm. Includes index. ISBN 978-0-470-43743-8 (cloth); ISBN 978-0-470-90239-4 (ebk); ISBN 978-0-470-90241-7 (ebk); ISBN 978-0-470-90243-1 (ebk); ISBN 978-0-470-95006-7 (ebk); ISBN 978-0-470-95166-8 (ebk); ISBN 978-0-470-95188-0 (ebk) 1. Concrete. I. Title. TP877.L485 2011 620.136—dc22 2010031083 Printed in the United States of America 10987654321 To students, teachers, researchers, and engineers in the field of concrete, who are the driving forces for the development of the science and technology of concrete, including the personnel working on the China 973 project, Basic Study on Environmentally Friendly Contemporary Concrete (2009CB623200). CONTENTS Preface xi 1 Introduction to Concrete 1 1.1 Concrete Definition and Historical Development 1 1.2 Concrete as a Structural Material 7 1.3 Characteristics of Concrete 10 1.4 Types of Concrete 14 1.5 Factors Influencing Concrete Properties 16 1.6 Approaches to Study Concrete 19 Discussion Topics 21 References 22 2 Materials for Making Concrete 23 2.1 Aggregates 23 2.2 Cementitious Binders 31 2.3 Admixtures 68 2.4 Water 85 Discussion Topics 88 Problems 89 References 90 3 Fresh Concrete 94 3.1 Workability of Fresh Concrete 94 3.2 Mix Design 107 3.3 Procedures for Concrete Mix Design 116 3.4 Manufacture of Concrete 122 3.5 Delivery of Concrete 123 3.6 Concrete Placing 125 3.7 Early-Age Properties of Concrete 135 vii viii Contents Discussion Topics 137 Problems 137 References 138 4 Structure of Concrete 140 4.1 Introduction 140 4.2 Structural Levels 141 4.3 Structure of Concrete in Nanometer Scale: C–S–H Structure 145 4.4 Transition Zone in Concrete 152 4.5 Microstructural Engineering 156 Discussion Topics 162 References 163 5 Hardened Concrete 164 5.1 Strengths of Hardened Concrete 164 5.2 Stress–Strain Relationship and Constitutive Equations 189 5.3 Dimensional Stability—Shrinkage and Creep 197 5.4 Durability 216 Discussion Topics 246 Problems 246 References 248 6 Advanced Cementitious Composites 251 6.1 Fiber-Reinforced Cementitious Composites 251 6.2 High-Strength Cementitious Composites 270 6.3 Polymers in Concrete 281 6.4 Shrinkage-Compensating Concrete 292 6.5 Self-Compacting Concrete 296 6.6 Engineered Cementitious Composite 310 6.7 Tube-Reinforced Concrete 312 6.8 High-Volume Fly Ash Concrete 316 6.9 Structural Lightweight Concrete 317 6.10 Heavyweight Concrete 317 Discussion Topics 317 Problems 319 References 320 7 Concrete Fracture Mechanics 326 7.1 Introduction 326 7.2 Linear Elastic Fracture Mechanics 330 7.3 The Crack Tip Plastic Zone 337 7.4 Crack Tip Opening Displacement 340 7.5 Fracture Process in Concrete 342 7.6 Nonlinear Fracture Mechanics for Concrete 346 7.7 Two-Parameter Fracture Model 348 7.8 Size Effect Model 355 7.9 The Fictitious Model by Hillerborg 364 7.10 R-Curve Method for Quasi-Brittle Materials 369 Contents ix Discussion Topics 374 Problems 375 References 379 8 Nondestructive Testing in Concrete Engineering 381 8.1 Introduction 381 8.2 Review of Wave Theory for a 1D Case 394 8.3 Reflected and Transmitted Waves 403 8.4 Attenuation and Scattering 406 8.5 Main Commonly Used NDT-CE Techniques 407 8.6 Noncontacting Resistivity Measurement Method 458 Discussion Topics 468 Problems 469 References 472 9 The Future and Development Trends of Concrete 476 9.1 Sustainability of Concrete 476 9.2 Deep Understanding of the Nature of Hydration 483 9.3 Load-Carrying Capability–Durability Unified Service Life Design Theory 485 9.4 High Toughness and Ductile Concrete 487 References 489 Index 491 PREFACE Concrete is the most widely used material in the world. It plays an important role in infrastructure and private buildings construction. Understanding the basic behaviors of concrete is essential for civil engineering students to become civil engineering professionals. There have been some very good books regarding concrete, including Concrete by Mindess, Young, and Darwin, Concrete: Structure, Properties, and Materials by Mehta and Monteriro, and Concrete Technology by Neville and Brook. The motivation to write this book is to introduce new methodologies, new developments, and new innovations in concrete technology. The unique features of this book include the introduction of end use guided research strategy for concrete, unification of materials and structures studies, and an emphasize on fundamental exploration of concrete structures, state of art of concrete development, and innovations. This book provides more comprehensive knowledge on concrete technology, including the systematic introduction of concrete fracture mechanics and nondestructive evaluation for concrete engineering. The book is divided into nine chapters. Chapter 1 gives a brief introduction of concrete, including its historic development and advantages. Chapter 2 provides the knowledge of raw materials used for making concrete, covering aggregates, binders, admixtures, and water. Chapter 3 discusses the properties of fresh concrete, including workability and the corresponding mea- surement methods. Chapter 4 focuses on the structure of concrete at different scales, especially the calcium silicate hydrate at nanometer scale. Chapter 5 covers the properties of hardened concrete, including strength, durability, stress–strain relation, and dimension stability. Chapter 6 provides updated knowledge on various cement-based composites, including self-consolidation concrete, ultra-high-strength concrete, and extruded and engineered cementitious composites. Chapter 7 focuses the fracture behavior of concrete and provides the basic knowledge of frac- ture mechanics of concrete. Chapter 8 covers the essential knowledge of nondestructive testing of concrete engineering, including wave propagation theory in 1-D case, detecting principles of different NDT methodologies and techniques of different NDT methods. In Chapter 9, the issues regarding the future and development trend of concrete have been discussed. Although the book is designed and written primarily to meet the teaching needs for under- graduate students at senior level and graduate students at entry level, it can serve as a reference or a guide for professional engineers in their practice. xi xii Preface In the process of writing this book, the authors received enthusiastic help and invaluable assistance from many people, which is deeply appreciated. The authors would like to express his special thanks to Dr. Garrison C. K. Chau, Dr. Biwan Xu, and Dr. Jianzhong Shen for their help in editing the book draft. Mr. Mike Pomfret is acknowledged for his professional page proofreading. The photos provided by Profs. Wei Sun, Tongbo Sui, Linhai Han, and Zhen He; Drs. Xiaojian Gao, Herbert Zheng, and Jinyang Jiang; Mr. Peter Allen; and the companies of Ove Arup and Gammon are greatly appreciated. The support from China Basic Research Grant, Basic Research on Environmentally Friendly Contemporary Concrete (2009CB623200) is greatly acknowledged. Finally, I would like to thank for my wife, Xiuming Cui, my daughters Yexin Li and Aileen Li for their love, understanding, and support. Advanced Concrete Technology CHAPTER 1 INTRODUCTION TO CONCRETE 1.1 CONCRETE DEFINITION AND HISTORICAL DEVELOPMENT Concrete is a manmade building material that looks like stone. The word “concrete” is derived from the Latin concretus, meaning “to grow together.” Concrete is a composite material com- posed of coarse granular material (the aggregate or filler) embedded in a hard matrix of material (the cement or binder) that fills the space among the aggregate particles and glues them together. Alternatively, we can say that concrete is a composite material that consists essentially of a bind- ing medium in which are embedded particles or fragments of aggregates.
Recommended publications
  • An Investigation of High-Performance Self Compacting Concrete Under Flexural Loading
    Civil Engineering and Architecture 8(6): 1414-1418, 2020 http://www.hrpub.org DOI: 10.13189/cea.2020.080624 An Investigation of High-Performance Self Compacting Concrete under Flexural Loading Theerthananda M P1,*, P C Srinivasa1, G M Naveen2 1Department of Civil Engineering, Government Engineering College, Kushalnagar, India 2Department of Civil Engineering, Government Engineering College, Chamarjanagar, India Received October 20, 2020; Revised November 25, 2020; Accepted December 30, 2020 Cite This Paper in the following Citation Styles (a): [1] Theerthananda M P, P C Srinivasa, G M Naveen, "An Investigation of High-Performance Self Compacting Concrete under Flexural Loading," Civil Engineering and Architecture, Vol. 8, No. 6, pp. 1414 - 1418, 2020. DOI: 10.13189/cea.2020.080624. (b): Theerthananda M P, P C Srinivasa, G M Naveen (2020). An Investigation of High-Performance Self Compacting Concrete under Flexural Loading. Civil Engineering and Architecture, 8(6), 1414 - 1418. DOI: 10.13189/cea.2020.080624. Copyright©2020 by authors, all rights reserved. Authors agree that this article remains permanently open access under the terms of the Creative Commons Attribution License 4.0 International License Abstract To shorten construction period, to assure compaction in the structure especially in confined zones where vibrating compaction is difficult and to eliminate noise due to vibration effective especially at concrete 1. Introduction products plants SCC is developed in practice. Also, SCC is applied to tunnel lining for preventing the cold joint High Performance Self Compacting Concrete (HPSCC) Self-compacting concrete has been used. Currently, the is the one which ability to Flow, good viscosity, main reasons for the employment of self-compacting segregation resistance and passing ability.
    [Show full text]
  • Fiber in Continuously Reinforced Concrete Pavements 6
    Technical Report Documentation Page 1. Report No. 2. Government 3. Recipient’s Catalog No. FHWA/TX-07/0-4392-2 Accession No. 4. Title and Subtitle 5. Report Date January 2006; Revised December 2006 Fiber in Continuously Reinforced Concrete Pavements 6. Performing Organization Code 7. Author(s) 8. Performing Organization Report No. Dr. Kevin Folliard, David Sutfin, Ryan Turner, and David P. 0-4392-2 Whitney 9. Performing Organization Name and Address 10. Work Unit No. (TRAIS) Center for Transportation Research 11. Contract or Grant No. The University of Texas at Austin 0-4392 3208 Red River, Suite 200 Austin, TX 78705-2650 12. Sponsoring Agency Name and Address 13. Type of Report and Period Covered Texas Department of Transportation Technical Report 9/1/01–8/31/03 Research and Technology Implementation Office 14. Sponsoring Agency Code P.O. Box 5080 Austin, TX 78763-5080 15. Supplementary Notes Project conducted in cooperation with the Federal Highway Administration and the Texas Department of Transportation. Project Title: Use of Fibers in Concrete Pavement 16. Abstract Continuously reinforced concrete pavement (CRCP) is a major form of highway pavement in Texas due to its increase in ride quality, minimal maintenance, and extended service life. However, CRCP may sometimes experience pavement distress that results in early failure, either due to under-design or the use of poor construction materials. Significant effort has been made to improve the performance of some of these materials (e.g. siliceous river gravel) to achieve an acceptable level of performance but has been unable to provide a practical solution. This research study investigates whether fiber reinforcement may solve some of the problems associated with siliceous river gravel, particularly spalling.
    [Show full text]
  • Experimental Investigation on Nano Concrete with Nano Silica and M-Sand
    International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 06 Issue: 03 | Mar 2019 www.irjet.net p-ISSN: 2395-0072 EXPERIMENTAL INVESTIGATION ON NANO CONCRETE WITH NANO SILICA AND M-SAND Mohan Raj.B1, Sugila Devi.G2 1PG Student, Nadar Saraswathi College of Engineering and Technology, Theni, Tamilnadu, India. 2Assistant Professor, Nadar Saraswathi College of Engineering and Technology, Theni, Tamilnadu, India. ---------------------------------------------------------------------***--------------------------------------------------------------------- Abstract - The influence of Nano-Silica on various material is Nano Silica (NS). The advancement made by the properties of concrete is obtained by replacing the cement study of concrete at Nano scale has proved the Nano silica is with various percentages of Nano-Silica. Nano-Silica is used as much better than silica fume used in conventional concrete. a partial replacement for cement in the range of 3%, 3.5%, Now, the researchers are capitalizing on nanotechnology to and 10% for M20 mix. Specimens are casted using Nano-Silica innovate a new generation of concrete materials that concrete. Laboratory tests conducted to determine the overcome the above drawbacks and trying to achieve the compressive strength, split tensile and flexural strength of sustainable concrete structures. Evolution of materials is Nano-Silica concrete at the age of 7, 14 and 28 days. Results need of the day for improved or better performance for indicate that the concrete, by using Nano-Silica powder, was special engineering applications and modifying the bulk able to increase its compressive strength. However, the density state of materials in terms of composition or microstructure is reduce compared to standard mix of concrete.
    [Show full text]
  • To the One Who Loved Me, Died for Me and Has Been Raised
    To the One Who loved me, died for me and has been raised. (Bible 2 Corinthians 5:14-15) Acknowledgements In this age, with the next millennium fast approaching, no one can carry out research work alone. Therefore, the author would like to show his appreciation to the many people who assisted with this study. First, I would like to give thanks to my supervisor Dr. P. L. Domone, who helped with this work, gave valuable suggestions and also corrected my written English patiently. I also appreciated Dr. Y. Xu's kind suggestions and encouragement, and both Dr. K. Ozawa and Dr. J.C. Liu supplied useful information concerning this study. I also enjoyed discussing this research work with my junior colleagues: Mr. V. Sheikh, Mr. E.M. Ahmed and Mrs. J. Jin. Furthermore, Mr A. Tucker and Miss H. Kinloch carried out several mixes concerning the early strength of SCC as their final year project under my guidance. The help I received from the technical staff of the Elvery Concrete Technology Laboratory cannot be ignored, especially from Mr. 0. Bourne and Mr. M. Saytch. Furthermore, I would like to acknowledge the scholarship from my government, without which the dream of studying in this country could not have come true, after having spent 12 years teaching. I especially want to give thanks to my family - my mother, my wife Priscilla and May and Boaz for their support. I owe them very much. I also appreciated the care from the saints in the church - it is impossible to list all of them.
    [Show full text]
  • Proposing a New Method Based on Image Analysis to Estimate the Segregation Index of Lightweight Aggregate Concretes
    materials Article Proposing a New Method Based on Image Analysis to Estimate the Segregation Index of Lightweight Aggregate Concretes Afonso Miguel Solak 1,2 , Antonio José Tenza-Abril 1 , Francisco Baeza-Brotons 1 and David Benavente 3,* 1 Department of Civil Engineering, University of Alicante, 03080 Alicante, Spain; [email protected] (A.M.S.); [email protected] (A.J.T.-A.); [email protected] (F.B.-B.) 2 CYPE Ingenieros S.A., 03003 Alicante, Spain 3 Department of Earth and Environmental Sciences, University of Alicante, 03080 Alicante, Spain * Correspondence: [email protected] Received: 18 October 2019; Accepted: 1 November 2019; Published: 5 November 2019 Abstract: This work presents five different methods for quantifying the segregation phenomenon in lightweight aggregate concretes (LWAC). The use of LWACs allows greater design flexibility and substantial cost savings, and has a positive impact on the energy consumption of a building. However, these materials are susceptible to aggregate segregation, which causes an irregular distribution of the lightweight aggregates in the mixture and may affect the concrete properties. To quantify this critical process, a new method based on image analysis is proposed and its results are compared to the well-established methods of density and ultrasonic pulse velocity measurement. The results show that the ultrasonic test method presents a lower accuracy than the other studied methods, although it is a nondestructive test, easy to perform, and does not need material characterization. The new methodology via image analysis has a strong correlation with the other methods, it considers information from the complete section of the samples, and it does not need the horizontal cut of the specimens or material characterization.
    [Show full text]
  • (AUTONOMOUS) Dundigal, Hyderabad- 500 043 CONCRETE TECHNOLOGY (ACE010) IARE-R16 B.Tech V SEM
    INSTITUTE OF AERONAUTICAL ENGINERRING (AUTONOMOUS) Dundigal, Hyderabad- 500 043 CONCRETE TECHNOLOGY (ACE010) IARE-R16 B.Tech V SEM Prepared by Mr. N. Venkat Rao, Associate Professor Ms.B.Bhavani, Assistant Professor COURSE GOAL • To introduce properties of concrete and it constituent materials and the role of various admixtures in modifying these properties to suit specific requirements, such as ready mix concrete, reinforcement detailing, disaster-resistant construction, and concrete machinery have been treated exhaustively the and also special concrete in addition to the durability maintenance and quality control of concrete structure. COURSE OUTLINE UNIT TITILE CONTENT I CEMENT Portland cement, chemical composition, Hydration, ADMIXTURE Setting of cement, Structure of hydrate cement, Test & on physical properties, Different grades of cement. AGGREGATE Mineral and chemical admixtures, properties, dosage, effects, usage. Classification of aggregate, Particle shape & texture, Bond, strength & other mechanical properties of aggregate, Specific gravity, Bulk density, porosity, adsorption & moisture content of aggregate, Bulking of sand, Deleterious substance in aggregate, Soundness of aggregate, Alkali aggregate reaction, Thermal properties, Sieve analysis, Fineness modulus, Grading curves, Grading of fine & coarse Aggregates, Gap graded aggregate, Maximum aggregate size. COURSE OUTLINE UNIT TITILE CONTENT II FRESH Workability, Factors affecting workability, CONCRETE Measurement of workability by different tests, Setting times of concrete, Effect of time and temperature on workability, Segregation & bleeding, Mixing and vibration of concrete, Steps in manufacture of concrete, Quality of mixing water. COURSE OUTLINE UNIT TITILE CONTENT III HARDENED Water / Cement ratio, Abram’s Law, Gel space ratio, CONCRETE Nature of strength of concrete, Maturity concept, TESTING Strength in tension & compression, Factors affecting OF strength, Relation between compression & tensile HARDENED strength, Curing.
    [Show full text]
  • Vysoké Učení Technické V Brně Brno University of Technology
    VYSOKÉ UČENÍ TECHNICKÉ V BRNĚ BRNO UNIVERSITY OF TECHNOLOGY FAKULTA STAVEBNÍ FACULTY OF CIVIL ENGINEERING ÚSTAV TECHNOLOGIE STAVEBNÍCH HMOT A DÍLCŮ INSTITUTE OF TECHNOLOGY OF BUILDING MATERIALS AND COMPONENTS VLIV VLASTNOSTÍ VSTUPNÍCH MATERIÁLŮ NA KVALITU ARCHITEKTONICKÝCH BETONŮ INFLUENCE OF INPUT MATERIALS FOR QUALITY ARCHITECTURAL CONCRETE DIPLOMOVÁ PRÁCE DIPLOMA THESIS AUTOR PRÁCE Bc. Veronika Ondryášová AUTHOR VEDOUCÍ PRÁCE prof. Ing. RUDOLF HELA, CSc. SUPERVISOR BRNO 2018 1 2 3 Abstrakt Diplomová práce se zaměřuje na problematiku vlivu vlastností vstupních surovin pro výrobu kvalitních povrchů architektonických betonů. V úvodní části je popsána definice architektonického betonu a také výhody a nevýhody jeho realizace. V dalších kapitolách jsou uvedeny charakteristiky, dávkování či chemické složení vstupních materiálů. Kromě návrhu receptury je důležitým parametrem pro vytvoření kvalitního povrchu betonu zhutňování, precizní uložení do bednění a následné ošetřování povrchu. Popsány jsou také jednotlivé druhy architektonických betonů, jejich způsob vyrábění s uvedenými příklady na konkrétních realizovaných stavbách. V praktické části byly navrženy 4 receptury, kde se měnil druh nebo dávkování vstupních surovin. Při tvorbě receptur byl důraz kladen především na minimální segregaci čerstvého betonu a omezení vzniku pórů na povrchu ztvrdlého betonu. Klíčová slova Architektonický beton, vstupní suroviny, bednění, separační prostředky, cement, přísady, pigment. Abstract This diploma thesis focuses on the influence of properties of feedstocks for the production of quality surfaces of architectural concrete. The introductory part describes the definition of architectural concrete with the advantages and disadvantages of its implementation. In the following chapters, the characteristics, the dosage or the chemical composition of the input materials are given. Besides the design of the mixture, important parameters for the creation of a quality surface of concrete are compaction, precise placement in formwork and subsequent treatment of the surface.
    [Show full text]
  • Nano Concrete and Its Classified Applications in Nano Technology
    NANO CONCRETE AND ITS CLASSIFIED APPLICATIONS IN NANO TECHNOLOGY 1ANUPRIYA P. JADHAV, 2A. P. PATIL, 3 D. D. PARKHE, 4S. D. BHAGAT, 5RAJENDRA PAWAR 1,2,3,4,5 MAHARASHTRA ENGINEERING RESEARCH INSTITUTE, NASHIK, MAHARASHTRA, INDIA . Email: [email protected] Abstract - This paper presents a modified design of Nanotechnology, which is one of the most active research areas that include a Number of disciplines including civil engineering and construction materials. In this paper, nano –silica has been replaced in various properties such as 2.5%, 3%, 3.5% to the weight of cement. Then the properties of concrete such as compressive strength of respective specimens were tested after 7 & 28 days of curing. Result has been obtained & compared with normal concrete mix. Nano concrete was concluded to have a higher strength than the ordinary concrete. Nanotechnology is the understanding, control, and restructuring of matter on the order of nano meters (i.e., less than 500nm) to create materials with fundamentally new properties and functions. The main advances have been in the nano science of cementitious materials with an increase in the knowledge and understanding of basic phenomena in cement at the nano scale. Keywords - Nano Scale, Asr, Nano Tube, Nano Silica, Polycarboxylates, Atomic Scale, Nano Concrete. I. INTRODUCTION C. WHAT IS NANO CONCRETE? A concrete made with portland cement particles that A. GNERAL are less than 500nm as a cementing agent. Nano Nanotechnology encompasses main approaches: (i) concrete is concrete made by filling the pores in the top down” approach, in which larger structures are conventional concrte using nano particals of size less reduced in size to the nano scale while maintaining than 500 nm.Currently cement particle sizes range their original properties order constructed from larger from a few nano-meters to a maximum of about 100 structures in to their smaller, composite parts and (ii) micro meters.
    [Show full text]
  • Experimental Study on Partial Replacement of Cement with Fly Ash and Complete Replacement of Sand with M Sand P.SRIDEVI1, DR
    Experimental Study On Partial Replacement Of Cement With Fly Ash And Complete Replacement Of Sand With M sand P.SRIDEVI1, DR. K. CHANDRAMOULI2 1Assistant Professor, Dept of Civil Engineering, NRI Institute of Technology, Visadala(V), Medikonduru(M), Guntur, AP, India, E-mail: [email protected]. 2 Professor& HOD, Dept Of Civil Engineering, NRI Institute Of Technology ,Visadala(V), Medikonduru(M), Guntur, AP, India, E-mail: koduru [email protected]. ABSTRACT Due to rapid growth in construction activity, the available sources of natural sand are getting exhausted & also, good quality sand may have to be transported from long distance, which adds to the cost of construction. In some cases, natural sand may not be of good quality. Therefore, it is necessary to replace natural sand in concrete by an alternate material partially, without compromising the quality of concrete. Quarry sand is one such material which can be used to replace sand as fine aggregate. The present study is aimed at utilizing Quarry sand as fine aggregate replacing natural sand and also the compressive strength of the water cured specimens is measured on the 7,14,28 Days. Split Tensile strength, Flexural Strength, Here we have conducting a test on concrete by using fly ash and m sand. By using these materials we have find out strength on a concrete by adding partial replacement on cement with fly ash and complete replacement of sand with m sand. Key words:: Experimental Study, Partial Replacement, Cement, Fly Ash, Sand, M sand. 1.INTRODUCTION Concrete is the most widely used construction material in civil engineering industry because of its high structural strength, stability, and malleability.
    [Show full text]
  • Eindhoven University of Technology MASTER Study on Bond Capacity Of
    Eindhoven University of Technology MASTER Study on bond capacity of 3D printed concrete with cable reinforcement Dezaire, S. Award date: 2018 Link to publication Disclaimer This document contains a student thesis (bachelor's or master's), as authored by a student at Eindhoven University of Technology. Student theses are made available in the TU/e repository upon obtaining the required degree. The grade received is not published on the document as presented in the repository. The required complexity or quality of research of student theses may vary by program, and the required minimum study period may vary in duration. General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights. • Users may download and print one copy of any publication from the public portal for the purpose of private study or research. • You may not further distribute the material or use it for any profit-making activity or commercial gain STUDY ON BOND CAPACITY OF 3D PRINTED CONCRETE WITH CABLE REINFORCEMENT GRADUATION THESIS S. Dezaire Eindhoven University of Technology Department of the Built Environment Master Architecture, Building and Planning Specialization Structural Design Title: STUDY ON BOND CAPACITY OF 3D PRINTED CONCRETE WITH CABLE REINFORCEMENT Report number: A-2018.225 Version: Published Date: 12-8-2018 Student: S. (Steven) Dezaire ID-number: 0810235 E-mail: [email protected] [email protected] Graduation committee: First supervisor: dr.
    [Show full text]
  • Strength Characteristics by Partial Replacement of Cement with Brick Powder
    International Journal of Applied Engineering Research ISSN 0973-4562 Volume 13, Number 7 (2018) pp. 94-99 © Research India Publications. http://www.ripublication.com Strength Characteristics by Partial Replacement of Cement with Brick Powder Sanjay Raj. A Assistant Professor, School of Civil Engineering, Rukmini Knowledge Park, REVA University, Yelankha, Bengaluru, Karnataka, India. Preeti D B, Anil Kumar, Akshay Mangraj UG Scholars, School of Civil Engineering, Rukmini Knowledge Park, REVA University, Yelankha, Bengaluru, Karnataka, India. Abstract transportation from sources & also large scale depletion of The purpose of this research is to study the properties of fresh sources creates environmental problems & to overcome these and hardened states of M40 grade concrete, using Crushed problems there is a need of cost effective alternative and ROCK Powder (CRP) as fine aggregate to full amount of sand innovative materials. with Partial replacement of brick powder at 0%, 5%, 10%, 15% and 20% to existing cement content. This paper Research Significance investigates quantitavely the strength of concrete mix at The most widely used fine aggregate for the different ages. The overall test results revealed that in making of concrete is natural sand, mined from the river beds. concrete mixtures, Crushed Rock Powder can be fully However, the availability of river sand for the preparation of substituted as an alternative material for natural sand (fine concrete is becoming scarce due to the excessive nonscientific aggregate) in presence of Brick powder upto 15%. These methods of mining. Apart from this, issues like lowering of findings guide the practitioner in selecting fly ash and water table, sinking of bridge piers, etc.
    [Show full text]
  • Crete Based on Spatial Distribution of Aggregate Size Fractions
    Image Anal Stereol 2020;39:147-159 doi: 105566/ias.2318 Original Research Paper QUANTIFICATION OF SEGREGATION IN PORTLAND CEMENT CON- CRETE BASED ON SPATIAL DISTRIBUTION OF AGGREGATE SIZE FRACTIONS MURAT OZEN, 1, MURAT GULER2 1Mersin University, Department of Civil Engineering, Mersin, Turkey; 2Middle East Technical University, De- partment of Civil Engineering, Ankara, Turkey e-mail: [email protected], [email protected] (Received December 27, 2019; revised July 16, 2020; accepted July 23, 2020) ABSTRACT Segregation is one of the quality standards that must be monitored during the fabrication and placement of Portland cement concrete. Segregation refers to separation of coarse aggregate from the cement paste, re- sulting in inhomogeneous mixture. This study introduces a digital imaging based technique to quantify the segregation of Portland cement concrete from 2D digital images of cut sections. In the previous studies, segregation was evaluated based on the existence of coarse aggregate fraction at different geometrical re- gions of a sample cross section without considering its distribution characteristics. However, it is shown that almost all particle fractions can form clusters and increase the degree of segregation, thus deteriorating the structural performance of concrete. In the proposed methodology, a segregation index is developed by based on the spatial distribution of different size fractions of coarse aggregate within a sample cross section. It is shown that degradation in mixture’s homogeneity is controlled by the combined effect of particle dis- tribution and their relative proportions in the mixture. Hence, a segregation index characterizing the mixture inhomogeneity is developed by considering not only spatial distribution of aggregate particles, but also their size fractions in the mixture.
    [Show full text]