DOCSLIB.ORG

ISO/IEC Directives, Part 1

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
ISO/IEC Directives, Part 1 ISO/IEC Directives, Part 1 Directives ISO/CEI, Partie 1 Consolidated JTC 1 Supplement 2018 — Procedures specific to JTC 1 Procédures spécifiques à JTC 1 Based on ISO/IEC Directives Part 1 Fourteenth Edition- 2018 International Organization for International Electrotechnical ISO/IEC Joint Technical Committee 1 Standardization (ISO) Commission (IEC) (JTC 1) Secretariat Chemin de Blandonnet 8 3, rue de Varembé c/o ANSI CP-401 1214 Vernier Geneva P.O. Box 131 25 West 43rd Street, 4th Floor Switzerland CH - 1211 GENEVA 20 New York, NY 10036 Telephone +41 22 749 01 11 Switzerland USA Fax +41 22 733 34 30 Phone: ++41 22 919 02 11 Phone: +1 212 642 4932 Email: [email protected] Fax: +41 22 919 0300 Fax: +1 212 840 2298 [email protected] Email:[email protected] ISO/IEC Directives, part 1 – Consolidated JTC 1 Supplement 2018 Contents Page 0 Introduction (Consolidated JTC 1 Supplement) ............................................................... vi 0.1 What is the Consolidated JTC 1 Supplement? ......................................................... vi 0.2 Relationship of the Consolidated JTC 1 Supplement to ISO/IEC Directives vi 0.3 The structure of the Consolidated JTC 1 Supplement.......................................... vi 0.4 Obtaining the Consolidated JTC 1 Supplement ...................................................... vi 0.5 Contact information for the Consolidated JTC 1 Supplement ........................... vi 1 Organizational structure and responsibilities for the technical work ................... 1 1.1 Role of the technical management board ............................................................... 1 1.2 Advisory groups to the technical management board ....................................... 2 1.3 Joint technical work ........................................................................................................ 2 1.4 Role of the Chief Executive Officer ............................................................................ 3 1.5 Establishment of technical committees ................................................................... 3 1.6 Establishment of subcommittees ............................................................................... 5 1.7 Participation in the work of technical committees and subcommittees ..... 6 1.8 Chairs of technical committees and subcommittees .......................................... 8 1.9 Secretariats of technical committees and subcommittees ............................ 10 1.10 Project committees ...................................................................................................... 12 1.11 Editing committees ...................................................................................................... 13 1.12 Working groups ............................................................................................................ 14 1.13 Groups having advisory functions within a committee .................................. 16 1.14 Ad hoc groups ................................................................................................................ 17 1.15 Liaison between technical committees ................................................................ 17 1.16 Liaison between ISO and IEC .................................................................................... 18 1.17 Liaison with other organizations ............................................................................ 18 2 Development of International Standards ....................................................................... 23 2.1 The project approach .................................................................................................. 23 2.2 Preliminary stage ......................................................................................................... 28 2.3 Proposal stage................................................................................................................ 28 2.4 Preparatory Stage......................................................................................................... 31 2.5 Committee stage............................................................................................................ 32 2.6 Enquiry stage ................................................................................................................. 34 2.7 Approval stage ............................................................................................................... 37 2.8 Publication stage .......................................................................................................... 38 2.9 Maintenance of Deliverables .................................................................................... 38 2.10 Corrections and amendments .................................................................................. 42 2.11 Maintenance agencies ................................................................................................. 44 2.12 Registration authorities ............................................................................................. 44 2.13 Copyright ......................................................................................................................... 44 2.14 Reference to patented items (see also Annex I) ................................................ 45 3 Development of other deliverables .................................................................................. 46 3.1 Technical Specifications ............................................................................................. 46 3.2 Publicly Available Specifications (PAS) ................................................................ 46 3.3 Technical Reports ......................................................................................................... 47 4 Meetings ..................................................................................................................................... 47 4.1 General ............................................................................................................................. 47 4.2 Procedure for calling a meeting .............................................................................. 48 4.3 Languages at meetings................................................................................................ 50 4.4 Cancellation of meetings ............................................................................................ 50 © ISO/IEC 2018 ii ISO/IEC Directives, part 1 – Consolidated JTC 1 Supplement 2018 5 Appeals ........................................................................................................................................ 50 5.1 General ............................................................................................................................. 50 5.2 Appeal against a subcommittee decision ............................................................. 51 5.3 Appeal against a technical committee decision ................................................. 51 5.4 Appeal against a technical management board decision ............................... 52 5.5 Progress of work during an appeal process ....................................................... 52 Annex A (normative) Guides ............................................................................................................ 53 A.1 Introduction ................................................................................................................... 53 A.2 Proposal stage................................................................................................................ 53 A.3 Preparatory stage ......................................................................................................... 53 A.4 Committee stage............................................................................................................ 53 A.5 Enquiry stage ................................................................................................................. 53 A.6 Publication stage .......................................................................................................... 54 A.7 Withdrawal of a Guide ................................................................................................ 54 Annex B (normative) ISO/IEC procedures for liaison and work allocation .................... 55 B.1 Introduction ................................................................................................................... 55 B.2 General considerations .............................................................................................. 55 B.3 Establishing new technical committees ............................................................... 56 B.4 Coordinating and allocating work between ISO and IEC technical committees ..................................................................................................................... 56 Annex C (normative) Justification of proposals for the establishment of standards .. 60 C.1 General ............................................................................................................................. 60 C.2 Terms and definitions ................................................................................................. 60 C.3 General principles ........................................................................................................ 61 C.4 Elements to be clarified when proposing a new field of technical activity or a new work item
Load more

Recommended publications
  • Harmoneerituks Tunnistatud Standardid
    12/2015 Ilmub üks kord kuus alates 1993. aastast Uued Eesti standardid Standardikavandite arvamusküsitlus Asendatud või tühistatud Eesti standardid Algupäraste standardite koostamine ja ülevaatus Standardite tõlked kommenteerimisel Uued harmoneeritud standardid Standardipealkirjade muutmine Uued eestikeelsed standardid ISSN 1406-0698 Avaldatud 03.12.2015 SISUKORD UUED, PEATATUD JA LÕPETATUD KOMITEED……………………………………………………..2 UUED STANDARDID JA STANDARDILAADSED DOKUMENDID ......................................... 3 ASENDATUD VÕI TÜHISTATUD EESTI STANDARDID JA STANDARDILAADSED DOKUMENDID ....................................................................................................................... 48 STANDARDIKAVANDITE ARVAMUSKÜSITLUS .................................................................. 69 TÕLKED KOMMENTEERIMISEL ........................................................................................ 104 ALGUPÄRASTE STANDARDITE JA STANDARDILAADSETE DOKUMENTIDE KOOSTAMINE ..................................................................................................................... 108 STANDARDITE JA STANDARDILAADSETE DOKUMENTIDE ÜLEVAATUS .................... 109 ALGUPÄRASTE STANDARDITE KEHTIVUSE PIKENDAMINE ......................................... 110 TÜHISTAMISKÜSITLUS ...................................................................................................... 111 TEADE EUROOPA STANDARDI OLEMASOLUST ............................................................. 113 UUED EESTIKEELSED STANDARDID JA STANDARDILAADSED
    [Show full text]
  • ISO 7001:2007 26206E8684e6/Iso-7001-2007
    INTERNATIONAL ISO STANDARD 7001 Third edition 2007-11-01 Graphical symbols — Public information symbols Symboles graphiques — Symboles destinés à l'information du public iTeh STANDARD PREVIEW (standards.iteh.ai) ISO 7001:2007 https://standards.iteh.ai/catalog/standards/sist/c9c6130e-5cf6-4375-a9a6- 26206e8684e6/iso-7001-2007 Reference number ISO 7001:2007(E) © ISO 2007 ISO 7001:2007(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. iTeh STANDARD PREVIEW (standards.iteh.ai) ISO 7001:2007 https://standards.iteh.ai/catalog/standards/sist/c9c6130e-5cf6-4375-a9a6- 26206e8684e6/iso-7001-2007 COPYRIGHT PROTECTED DOCUMENT © ISO 2007 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester.
    [Show full text]
  • Plan Nacional De Normalización 2016/2017
    ACTUALIZADO 07/07/2017 PERIODO 2017 PÁGINA 1 DE 46FFFFFFFFFF PLAN NACIONAL DE NORMALIZACIÓN 2016/2017 Sistema de códigos de las etapas: 00) Etapa preliminar 10) Etapa de propuesta Código: R02-PGDN-01 20) Etapa de preparación Versión: 02 30) Etapa de comité Dirección: Ciudad Científica de la Universidad de Costa Rica. 40) Etapa de encuesta o consulta pública www.inteco.org 50) Etapa de aprobación (50.1 con observaciones, 50.2 voto OE, 50.3 voto CNN) 60) Etapa de publicación 90) Etapa de revisión o actualización 95) Etapa de retiro o anulación FECHA INICIO DE LA FECHA PREVISTA DE PERIODO OE CÓDIGO INTE NUEVO CÓDIGO PROYECTO DE NORMA ICS ANTECEDENTES ETAPA FECHA FINAL CP ETAPA PUBLICACIÓN FAST TRACK Normalización y actividades conexas- Vocabulario general 2016 FT GUÍA INTE/ISO/IEC 2:2016 GUÍA INTE/ISO/IEC 2:2016 01.120; 01.040.01 ISO/IEC Guide 2:2004 60 19/12/2016 13/12/2016 2016-12 (ISO/IEC Guide 2:2004, IDT). Adopción regional o nacional de normas internacionales y otras publicaciones internacionales- parte 2: adopción de 2016 FT GUÍA INTE/ISO/IEC 21-2: 2016 GUÍA INTE/ISO/IEC 21-2: 2016 1120 Guía ISO/IEC 21-2:2005 60 19/12/2016 13/12/2016 2016-12 publicaciones internacionales distintas a las normas internacionales Elementos de datos y formatos de intercambio. Intercambio 2017 FT APN INTE/ISO 3166-1:2017 APN INTE/ISO 3166-1:2017 01.140.30 20 2017-03-20 de información. Representación de la fecha y de la hora. ISO 3166-1:2013 Códigos para la representación de los nombres de los países 2017 FT APN INTE/ISO 8601:2017 APN INTE/ISO 8601:2017 01.140.30 ISO 8601:2004 20 2017-03-20 y sus subdivisiónes.
    [Show full text]
  • HZN Oglasnik Za Normativne Dokumente 5
    Hrvatski zavod za norme Oglasnik za normativne dokumente 5/2014 listopad, 2014. Oglasnik za normativne dokumente Hrvatskog zavoda za norme sadrži popise hrvatskih norma, nacrta hrvatskih norma, prijedloga za prihvaćanje stranih norma u izvorniku, povučene hrvatske norme, povučene nacrte hrvatskih norma te ispravke, rezultate europske i međunarodne normizacije razvrstane po predmetnom ustroju i obavijesti HZN-a. Tko u popisima normativnih dokumenata koji su objavljeni u ovom Oglasniku otkrije koju grešku, koja može voditi do krive primjene, moli se da o tome neodložno obavijesti Hrvatski zavod za norme, kako bi se mogli otkloniti uočeni propusti. Izdavač: Sadržaj: 1 Rezultati hrvatske normizacije 2 Rezultati međunarodne i europske 1.1 Hrvatske norme ............................................................ A3 normizacije razvrstani po predmetnom 1.2 Nacrti hrvatskih norma ............................................... A42 ustroju .................................................A83 1.3 Prijedlozi za prihvaćanje stranih norma u izvorniku ... A42 3 Popis radnih dokumenata Codex 1.4 Povučene hrvatske norme.......................................... A66 Alimentariusa 1.5 Povučeni nacrti hrvatskih norma ....................................... 4 Obavijesti HZN-a 1.6 Ispravci hrvatskih norma .............................................A79 4.1 Cjenik hrvatskih norma 1.7 Naslovi objavljenih hrvatskih norma na hrvatskome jeziku........................................................A82 1.8 Drugi normativni dokumenti 1.9 Opća izdanja HZN-a 1.10 Prijevodi hrvatskih normativnih dokumenata ...............A83 A2 HZN - Oglasnik za normativne dokumente 5/2014 • Rezultati hrvatske normizacije Rezultati hrvatske normizacije HZN/TO 21, Protupožarna i vatrogasna oprema HRN EN 694:2014 en pr 1.1 Hrvatske norme Vatrogasne cijevi – Polukrute cijevi za stabilne Temeljem Zakona o normizaciji (Narodne novine 80/2013) sustave (EN 694:2014) hrvatske norme priprema, izdaje i objavljuje Hrvatski zavod za Fire-fighting hoses – Semi-rigid hoses for fixed norme, na prijedlog tehničkih odbora.
    [Show full text]
  • Standardiseringsprosjekter Og Nye Standarder
    Annonseringsdato: 2016-06-29 Listenummer: 13/2016 Standardiseringsprosjekter og nye standarder Listenummer: 13/2016 Side: 1 av 151 01 Generelt. Terminologi. Standardisering. Dokumentasjon 01 Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - europeiske (CEN) prEN 303-1 Kjeler for oppvarming - Del 1: Kjeler for oppvarming med mekaniske trekkbrennere - Terminologi, generelle krav, prøving og merking Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking Språk: en Kommentarfrist: 2016.07.28 prEN 17018 Railway applications - Rolling Stock Maintenance - Terms and definitions Språk: en Kommentarfrist: 2016.09.16 prEN ISO 13943 Brannsikkerhet - Terminologi (ISO/DIS 13943:2016) Fire safety - Vocabulary (ISO/DIS 13943:2016) Språk: en Kommentarfrist: 2016.07.21 prEN ISO 18369-1 Oftalmisk optikk - Kontaktlinser - Del 1: Terminologi , klassifiseringssystem og anbefalinger for merking av spesifikasjoner (ISO/DIS 18369-1:2016) Ophthalmic optics - Contact lenses - Part 1: Vocabulary, classification system and recommendations for labelling specifications (ISO/DIS 18369-1:2016) Språk: en Kommentarfrist: 2016.07.14 Standardforslag til høring - internasjonale (ISO) ISO 7001:2007/DAmd 96 PI TF 042: Meeting point Språk: en Kommentarfrist: 2016.10.08 ISO 7001:2007/DAmd 97 PI TF 043: Tour group meeting point Språk: en Kommentarfrist: 2016.10.08 ISO 7001:2007/DAmd 98 Symbol PI PF 074: Automatic sensor faucet Språk: en Kommentarfrist: 2016.10.06 ISO 7001:2007/DAmd 99 PI PF 075: Hand dryer Språk: en Kommentarfrist: 2016.10.06 ISO 7001:2007/DAmd 100 PI PF 076: Toilet paper Språk: en Kommentarfrist: 2016.10.06 Listenummer: 13/2016 Side: 2 av 151 01 Generelt. Terminologi. Standardisering.
    [Show full text]
  • Handling Data Consistency Through Spatial Data Integrity Rules in Constraint Decision Tables
    Handling Data Consistency through Spatial Data Integrity Rules in Constraint Decision Tables Fei Wang Vollständiger Abdruck von der Fakultät für Bauingenieur- und Vermessungswesen der Universität der Bundeswehr München zur Erlangung des akademischen Grades eines Doktor- Ingenieurs (Dr.-Ing.) genehmigten Dissertation. Vorsitzender: Univ.-Prof. Dr.-Ing. Wilhelm Caspary 1.Berichterstatter: Univ.-Prof. Dr.-Ing. Wolfgang Reinhardt 2.Berichterstatter: Univ.-Prof. Dr.-Ing. Anders Östman Diese Dissertation wurde am 31. Jan. 2008 bei der Universität der Bundeswehr münchen eingereicht. Tag der Mündlichen Prüfung: 13. Mai 2008 2 3 Abstract With the rapid development of the GIS world, spatial data are being increasingly shared, transformed, used and re-used. The quality of spatial data is put in a high priority because spatial data of inadequate quality is of little value to the GIS community. Several main components of spatial data quality were indentified by international standardization bodies such as ISO/TC 211, OGC and FGDC, which consists of seven usual quality elements: lineage, positional accuracy, attribute accuracy, semantic accuracy, temporal accuracy, logical consistency and completeness (two different names for similar aspects of quality are grouped in the same category). In this dissertation our work focuses on the data consistency issue of the spatial data quality components, which involves the logical consistency as well as semantic and temporal aspects. Due to complex geographic data characteristics, various data capture workflows and different data sources, the final large datasets often result in inconsistency, incompleteness and inaccuracy. To reduce spatial data inconsistency and provide users the data of adequate quality, the specification of spatial data consistency requirements should be explicitly described.
    [Show full text]
  • Modellierung2018-Konferenzband.Pdf
    Ina Schaefer, Dimitris Karagiannis, Andreas Vogelsang, Daniel Méndez, Christoph Seidl (Hrsg.) Modellierung 2018 21.02.2018 – 23.02.2018 Braunschweig, Deutschland Gesellschaft für Informatik e.V. (GI) Lecture Notes in Informatics (LNI) - Proceedings Series of the Gesellschaft für Informatik (GI) Volume P-280 ISBN 978-3-88579-674-9 ISSN 1617-5468 Volume Editors Prof. Dr.-Ing. Ina Schaefer TU Braunschweig Mühlenpfordtstr. 23, 38106 Braunschweig [email protected] o. Univ.-Prof. Dr. Dimitris Karagiannis Universität Wien Währinger Straße 29, 1090 Wien [email protected] Series Editorial Board Heinrich C. Mayr, Alpen-Adria-Universität Klagenfurt, Austria (Chairman, [email protected]) Torsten Brinda, Universität Duisburg-Essen, Germany Dieter Fellner, Technische Universität Darmstadt, Germany Ulrich Flegel, Infineon, Germany Ulrich Frank, Universität Duisburg-Essen, Germany Michael Goedicke, Universität Duisburg-Essen, Germany Ralf Hofestädt, Universität Bielefeld, Germany Wolfgang Karl, KIT Karlsruhe, Germany Michael Koch, Universität der Bundeswehr München, Germany Thomas Roth-Berghofer, University of West London, Great Britain Peter Sanders, Karlsruher Institut für Technologie (KIT), Germany Andreas Thor, HFT Leipzig, Germany Ingo Timm, Universität Trier, Germany Karin Vosseberg, Hochschule Bremerhaven, Germany Maria Wimmer, Universität Koblenz-Landau, Germany Dissertations Steffen Hölldobler, Technische Universität Dresden, Germany Thematics Andreas Oberweis, Karlsruher Institut für Technologie (KIT), Germany Gesellschaft für Informatik, Bonn 2018 printed by Köllen Druck+Verlag GmbH, Bonn This book is licensed under a Creative Commons BY-SA 4.0 licence. Vorwort Die derzeit im zweijährigen Rhythmus stattfindende Fachtagung „Modellierung“ ist eine Plattform zur inhaltlichen Diskussion für eine große Anzahl von Fachgruppen in der Gesellschaft für Informatik (GI), die sich mit unterschiedlichsten Perspektiven des Themas Modellierung beschäftigen.
    [Show full text]
  • EG 202 116 V1.2.1 (2002-09) ETSI Guide
    ETSI EG 202 116 V1.2.1 (2002-09) ETSI Guide Human Factors (HF); Guidelines for ICT products and services; "Design for All" 2 ETSI EG 202 116 V1.2.1 (2002-09) Reference DEG/HF-00031 Keywords ageing, disability, equipment practice, special needs, terminal ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88 Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: [email protected] Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. © European Telecommunications Standards Institute 2002.
    [Show full text]
  • Blank IEC Form
    3(Seattle/Secretary)4 For IEC use only ® 2010-10-03 INTERNATIONAL ELECTROTECHNICAL COMMISSION TECHNICAL COMMITTEE 3: INFORMATION STRUCTURES, DOCUMENTATION AND GRAPHICAL SYMBOLS Maintenance Team 21: MAINTENANCE OF IEC 62079 Report on IEC TC 3 MT 21 Activities 1 Organization Convenors: Mrs Gabriela Fleischer (DE) Mr Naoki Tokuda (JP) Members: Mr Sumio Araki (JP) Mr Thomas Borglin (SE) Mr Kai Bohn (DE) Mr Michael Fritz (DE) Mr Gordon Hayward (GB) Mr Hiroaki Ikeda (JP) Ms Junko KANAMARU (JP) Mr John Perry (GB) Mr Sven Radhe (ISO) Mr Arto Sirviö (FI) Mr Karl-Anker Thorn (DK) Mr Sven Ingolf Garnæs Ring (DK) Mr Roland Schmeling (DE) 2 Status of IEC 82079. The 2nd CD of IEC 82079 was circulated with closing 2010-03-05. The circulation resulted in a big number of comments which required essential changes of the draft. TC 3 Chairman and Secretary decided that a third draft should be circulated. The 3rd CD was circulated with closing date 2010-08-13. Also this circulation resulted in a big number of comments (for one thing because comments from ISO TC 10 on 2nd CD by mistake was not reported to the 2nd CD but to the 3rd). A preliminary compilation of comments was circulated 2010-09-17. MT 21 considered all comments in a meeting in September and prepared a draft intended to be circulated as CDV. The final compilation of comments has been completed but could not be circulated before the TC 3 plenary meeting in Seattle. The draft CC also including the draft CDV is attached to this report.
    [Show full text]
  • Design Da Informação Em Saúde
    Carla . Spinillo & Tatiana de Trotta Saúde em Informação da da em Desin Estudos e Reexões Tatiana de Trotta de Tatiana & ioi ioi Carla . Spinillo Design da Informação em Saúde Carla G. Spinillo & Tatiana de Trotta organizadoras Design da Informação em Saúde Estudos e Reflexões BRioi Curitiba • 2019 Dados Internacionais de Catalogação na Publicação (CIP) Agência Brasileira do ISBN – Bibliotecária Priscila Pena Machado CRB-7/6971 D457 Design da informação em saúde / orgs. Carla G. Spinillo e Tatiana de Trotta. — Curitiba : BRioi, 2019. Dados eletrônicos (pdf). ISBN 978-85-906855-1-7 1. Design visual. 2. Medicamentos - Fórmulas e receitas. 3. Comunicação visual. 4. Design gráfico (tipografia). 5. Ergonomia. 6. Promoção da saúde. I. Spinillo, Carla G. II. Trotta, Tatiana de. III. Título. CDD 302.22 Agradecimentos As organizadoras deste livro agradecem aos autores/revisores pelas suas contribuições na construção desta obra e às agências de fomento brasileiras pelo apoio aos estudos aqui reportados através de bolsas e financiamento direto a pesquisas. Sumário Apresentação • 9 1 Bulas e embalagens de medicamentos como instrumentos de educação em saúde • 13 TaTiane da silva dal Pizzol & Cassia garCia Moraes 2 O papel de um artefato informacional para usuários de medicamentos durante orientação farmacêutica em farmácias comunitárias • 49 CaMila KloCKer CosTa 3 Prontuários como artefatos de informação para profissionais de saúde Um olhar sob a perspectiva das teorias da Carga Cognitiva e Human Information Behavior • 83 Helena HieMisCH lobo borba 4 Animações para uso de medicamentos Um estudo sobre compreensão e eficácia de sequências pictóricas de procedimentos animadas (SPPAs) • 99 Carla g. sPinillo, aManda r.
    [Show full text]
  • International Standards in Process CD Registered
    International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an Interna- tional Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft Inter- national Standard (FDIS), the approval criteria remaining the same. CD registered Period from 01 April to 30 April 2018 These documents are currently under consideration in the technical committee. They have been registred at the Central Secretariat. TC 21 Equipment for fire protection and fire fighting ISO/CD 7240-17 Fire detection and fire alarm systems — Part 17: Transmission path isolators TC 22 Road vehicles ISO/DTR 8713 Electrically propelled road vehicles — Vocabulary TC 23 Tractors and machinery for agriculture and forestry ISO/CD 5681 Equipment for crop protection — Vocabulary ISO/CD 6533 Forestry machinery — Portable chain-saw front hand-guard — Dimensions and clearances ISO 13772:2018/CD Forestry machinery — Portable chain-saws — Non-manually actuated chain brake performance — Amendment 1 Amd 1 ISO/CD 22867 Forestry and gardening machinery — Vibration test code for portable hand-held machines with internal combustion engine
    [Show full text]
  • ISO Committee on Consumer Policy (COPOLCO) 38Th Meeting Geneva, Switzerland 17 June 2016
    ISO Committee on consumer policy (COPOLCO) 38th meeting Geneva, Switzerland 17 June 2016 Working documents 1 AGENDA ITEM 1 WELCOME AND OPENING OF THE MEETING 2 AGENDA ITEM 2 ADOPTION OF THE AGENDA 3 COPOLCO N203/2016 DRAFT AGENDA FOR THE 38TH MEETING OF COPOLCO 17 June 2016 – Mövenpick Hotel, Geneva, Switzerland, starting at 9:00 Item Document Action Rapporteur R. Nadarajan, 1. Welcome and opening of the meeting - N SNV representative, K. McKinley 2. Adoption of the agenda N203 C R. Nadarajan 3. Key developments across ISO: Oral report Strategies and programmes TMB – issues/updates on standards development C environment and stakeholder engagement O. Peyrat – DEVCO/Academy events CASCO – issues and events Tabling of the minutes of the 37th COPOLCO meeting 4. held in Geneva on 14 May 2015 N184 C R. Nadarajan Chair’s and Secretary's reports on items not otherwise R. Nadarajan 5. N204 C covered in the agenda D.Kissinger-Matray New work items and issues – general matters Raising the profile of consumer interests in the ISO system R. Devi Nadarajan 6. N205 D (awareness and capacity building) D. Kissinger-Matray 7. Strategy implementation for ISO/COPOLCO N206 D R. Devi Nadarajan R. Nadarajan 8. 2016 workshop – Results and follow-up actions N207 D K. McKinley A. Pindar 9. Consumer priorities in standardization on services N208 D Liu Chengyang New work items and issues – working groups A. Pindar 10 Revision of ISO/IEC Guide 76 N209 D Liu Chengyang M. Murvold 11. Key areas working group N210 D T. Nakakuki Consumer protection in the global marketplace working 12.
    [Show full text]