President Trump Announces Manufacturing Jobs Initiative

Total Page：16

File Type：pdf, Size：1020Kb

The White House Office of the Press Secretary For Immediate Release January 27, 2017 President Trump Announces Manufacturing Jobs Initiative (Washington, DC) — President Trump announced today that as part of his overall job creation agenda he will launch a Manufacturing Jobs Initiative. The President will be meeting with some of the world’s most successful and creative business leaders to share their experiences and gain their insights. President Trump plans to continually seek information and perspectives from a diverse range of business leaders, including those listed below and others, on how best to promote job growth and get Americans back to work again. The first series of meetings were organized by Andrew Liveris, Chairman and Chief Executive Officer of the Dow Chemical Company. The President has expressed his appreciation to Mr. Liveris for his ongoing efforts in this regard. Initial business leaders assisting with the Manufacturing Jobs Initiative include: Andrew Liveris, The Dow Chemical Company Bill Brown, Harris Corporation Michael Dell, Dell Technologies John Ferriola, Nucor Corporation Jeff Fettig, Whirlpool Corporation Mark Fields, Ford Motor Company Ken Frazier, Merck & Co., Inc. Alex Gorsky, Johnson & Johnson Greg Hayes, United Technologies Corp. Marilynn Hewson, Lockheed Martin Corporation Jeff Immelt, General Electric Jim Kamsickas, Dana Inc. Klaus Kleinfeld, Arconic Brian Krzanich, Intel Corporation Rich Kyle, The Timken Company Thea Lee, AFLCIO Mario Longhi, U.S. Steel Denise Morrison, Campbell Soup Company Dennis Muilenburg, Boeing Elon Musk, Tesla Doug Oberhelman, Caterpillar Scott Paul, Alliance for American Manufacturing Kevin Plank, Under Armour Mike Polk, Newell Brands Mark Sutton, International Paper Inge Thulin, 3M Richard Tumka, AFLCIO Wendell Weeks, Corning The attendees may or may not change from session to session, but the specific agenda subjects will likely change because of the importance of this issue to the American economy and its workers. No consensus advice or recommendations resulting from group deliberations or interaction is expected or will be solicited..

Copy Link

Recommended publications

Notice of 2013 Annual Meeting of Shareholders and Proxy Statement
Notice of 2013 Annual Meeting of Shareholders and Proxy Statement THE TIMKEN COMPANY Canton, Ohio U.S.A. 1300100_1_64sc.pdf 2 3/14/13 5:01 PM TABLE OF CONTENTS PAGE Chairman’s Letter ……………………………………………………………………………….… 2 Notice of Annual Meeting ………………………………………………………………………... 3 Proxy Statement ………………………………………………………………………………….. 5 Election of Directors ………………………………………………………………………… 5 Election of Directors (Item No. 1) ………………………………………..……………. 5 Nominees ………………………………………………………………………………… 6 Director Compensation ………………………………….………………………………….. 11 2012 Director Compensation Table………………………………………………………… 12 Board Leadership Structure ………………………………………………………………... 13 Risk Oversight ……………………………………………………………………………….. 13 Audit Committee ……………………………………………………………………………... 14 Audit Committee Report ………………………………………………………………..…… 14 Compensation Committee ………………………………………………………………….. 14 Compensation Committee Report ……………………………………………………….… 15 Nominating and Corporate Governance Committee ………………………………….…. 16 Beneficial Ownership of Common Stock ………………………………………………….. 17 Compensation Discussion and Analysis ……………………………………….……….… 20 Executive Compensation …………………………………………………………….…..…. 32 Ratification of Appointment of Independent Auditors (Item No. 2) ……………………... 44 Auditors ……………………………………………………………………………………….. 45 Shareholder Advisory Vote on Named Executive Officer Compensation (Item No. 3).. 45 Amendments to the Company’s Amended Articles of Incorporation to Reduce Certain Shareholder Voting Requirements (Item No. 4)……………………………….… 46 Amendments to the Company’s Amended
[Show full text]
Certain Bearings from China, 731-Ta-344, 391A, 392A
CERTAIN BEARINGS FROM CHINA, 731-TA-344, 391A, 392A (SECOND REVIEW) FRANCE, GERMANY, ITALY, JAPAN, 731-TA-392C, 393A, 394A (SECOND REVIEW) SINGAPORE, AND THE UNITED KINGDOM 731-TA-396 and 399A (SECOND REVIEW) AMENDED PUBLIC SERVICE LIST I, Marilyn R. Abbott, hereby certify that the parties listed have entered an appearance in the above captioned investigation, and a copy of the PUBLIC CERTIFICATE OF SERVICE was served upon the following parties via first class mail and air mail where necessary. ONLY PUBLIC INFORMATION IS TO BE SERVED ON THE PARTIES LISTED BELOW. Served April 20, 2006. *NOTE: Changes to personnel. /s/ ___________________________ Marilyn R. Abbott, Secretary U.S. International Trade Commission 500 E Street, SW Suite 112A Washington, DC 20436 Behalf of NSK, Ltd.; NSK Europe Ltd; NSK Corporation and Japan Bearing Behalf of New Hampshire Ball Bearings; Industrial Association: NMB Singapore, Ltd.; Pelmec Industries (Pte), Ltd. and NMB Technologies Corp.: Matthew P. Jaffe, Esq. CROWELL MORING Christopher F. Corr, Esq. 1001 Pennsylvania Avenue, NW WHITE AND CASE Washington, DC 20004-2595 701 Thirteenth Street, N.W. Washington, D.C. 20005 Behalf of Pacamor Kubar Bearings, RBC Bearings and The Timken Company: Behalf of SKF, USA, Inc.; SKF GmbH, SKF France, S.A.; Sarma; SKF Industrie, Erick P. Salonen, Esq. S.p.A.; and SKF Aeroengine Bearings STEWART AND STEWART UK: 2100 M Street, NW Washington, DC 20037 Herbert C. Shelley, Esq. STEPTOE AND JOHNSON Behalf of NTN Corporation; NTN Bearing 1330 Connecticut Avenue, NW Corporation of America; American NTN Washington, DC 20036-1795 Bearing Manufacturing Corporation; NTN-BCA Corporation and NTN Behalf of Peer Bearing Company: Driveshaft, Inc.: John M.
[Show full text]
Givingleaders in LEVELS of GIVING Bronze
LEADERS IN Giving2017 United Way of Greater Stark County 1 “Greater Stark County is fortunate to have leaders like you! You are our community’s most exciting and influential force, giving local kids, families and individuals hope for a better tomorrow.” GivingLEADERS IN LEVELS OF GIVING Bronze............................$1,000 - $1,499 Pewter............................$1,500 - $2,499 Silver...............................$2,500 - $4,999 Gold................................$5,000 - $7,499 Platinum.........................$7,500 - $9,999 Alexis de Tocqueville.............$10,000+ Maria Heege President & CEO United Way of Greater Stark County CONTENTS Officers & Board of Directors .. ..............................4 Leaders in Giving, Pewter ............................20 - 21 New Branding .. .....................................................5 Leaders in Giving, Bronze ........................... 22 - 25 Work in the Community ...................................6 - 7 Corporate & Foundation Gifts..............................26 Alexis de Tocqueville Society........................8 - 15 Corporate & Foundation Gifts by Firm..........27 - 28 Alexis de Tocqueville Society Mentors...............16 Women United Members..............................29 - 30 New Alexis de Tocqueville Society Members......16 Campaign Message............................................31 Leaders in Giving Platinum.................................17 Campaign Awards...............................................32 Leaders in Giving, Gold.......................................17
[Show full text]
Only Class 3110 Aerospace Roller Bearings Granted a Waiver from The
LIST CURRENT AS OF 17 SEPTEMBER 2013 List of Class 3110, Aerospace Roller Bearings that have been granted a Waiver from the Non-Manufacturing Rule (NMR) Legend: All of the below bearing Federal Stock Numbers begin with a class-designation of 3110 and are then followed by 9 digits (ex. 000045095), which identifies the specific bearing Below each bold Federal Stock Number are the CAGE codes and names of approved manufacturers of that bearing o The CAGE code is listed first and the name of the manufacturer is below each CAGE code (ex. NTN BEARING CORPORATION OF AMERICA with their CAGE code [0LTL1] listed above ) 000045095 0LTL1 NTN BEARING CORPORATION OF AMERICA 60038 THE TIMKEN CORPORATION Z0992 AUSTRALIAN TIMKEN PTY LTD 000389332 52676 SKF USA INC. 77107 PARAGON POWER INC SUB OF GREAT LAKES 000519119 13499 1 | P a g e LIST CURRENT AS OF 17 SEPTEMBER 2013 ROCKWELL COLLINS INC. DIV GOVERNMENT 40920 MPB CORPORATION DBA TIMKEN SUPER PRE 50294 NEW HAMPSHIRE BALL BEARINGS, INC. DB 000616154 40920 MPB CORPORATION DBA TIMKEN SUPER PRE 83086 NEW HAMPSHIRE BALL BEARINGS INC. DIV 000866964 0LTL1 NTN BEARING CORPORATION OF AMERICA 52676 SKF USA INC. 001000268 0LTL1 NTN BEARING CORPORATION OF AMERICA 3D6E9 AXLETECH INTERNATIONAL LLC 60038 THE TIMKEN CORPORATION 78500 MERITOR HEAVY VEHICLE SYSTEMS LLC DI F0272 2 | P a g e LIST CURRENT AS OF 17 SEPTEMBER 2013 SKF FRANCE F0704 THE TIMKEN COMPANY H2229 RDM TECHNOLOGY B.V. 001000271 06085 BAE SYSTEMS LAND & ARMAMENTS L.P. BA 0LTL1 NTN BEARING CORPORATION OF AMERICA 45152 OSHKOSH CORPORATION 60038 THE TIMKEN CORPORATION 001000282 04627 NACCO MATERIALS HANDLING GROUP INC 0LTL1 NTN BEARING CORPORATION OF AMERICA 60038 THE TIMKEN CORPORATION F0272 SKF FRANCE F0704 THE TIMKEN COMPANY 3 | P a g e LIST CURRENT AS OF 17 SEPTEMBER 2013 001000285 0LTL1 NTN BEARING CORPORATION OF AMERICA 11083 CATERPILLAR INC.
[Show full text]
Final STATEMENT of BRIAN J. RUEL VICE PRESIDENT, THE
Final CERTAIN TAPERED ROLLER BEARINGS FROM THE REPUBLIC OF KOREA INV. No. 731-TA-1380 (FINAL) HEARING BEFORE THE UNITED STATES INTERNATIONAL TRADE COMMISSION JUNE 5, 2018 STATEMENT OF BRIAN J. RUEL VICE PRESIDENT, THE AMERICAS THE TIMKEN COMPANY Good morning, Chairman Schmidtlein, Commissioners and Commission staff My name is Brian Ruel. I am the Vice President for the Americas at The Timken Company. In my current role, I oversee all aspects of customer contacts in the Americas such as sales, application engineering and service engineering. I have responsibility for sales to both OEM customers and our distributors regardless of particular market such as automotive, heavy truck, various industrial, rail and so on. This is my 34th year in the bearing industry, and with Timken. I have been in my current role since the beginning of 2016. As Chris Coughlin just testified, tapered roller bearings come in a wide range of sizes, but in the market there are meaningful distinctions between small diameter TRBs (those that are 8" or smaller) and large diameter TRBs (those larger than 8"). The tapered roller bearing was invented to address a problem that vehicles were having handling cornering loads. Not surprisingly, the largest use of TRBs in the market continues to be automotive and heavy truck customers. Nearly 100% of these customers need and use 0-8" TRBs. There is a distinct automotive aftermarket which consists of distributors and dealers/service operations catering to automobiles and trucks. Replacement parts, like those used by OEM customers, are nearly all 0- 1 Final 8" in OD.
[Show full text]
2014-2015 Internship Survey Report
Case Western Reserve University Career Center Internship Report 2014-2015 Internship Survey 2014‐15 Introduction The 2014‐15 Internship Survey was administered using Qualtrics, a web‐based assessment vendor, over approximately four weeks during August – September 2015 to 3,931 returning undergraduate students. Students were asked to report on their internship experiences over the time period Fall 2014 – Summer 2015. There were 1,511 individuals who responded to the survey for a response rate of 38%. Appendix A includes a copy of the survey. Internship Participation Students were asked whether or not they had participated in an internship, defined as a work‐based learning experience, typically related to one’s major field of study and/or intended career, which could be full‐time or part‐time, paid or unpaid, with no course enrollment. Six hundred forty students reported that they participated in one internship within this timeframe; 29 students reported participating in two internships; for a total of 669 internships reported. Timing Of the 669 internships reported, 633 (95%) had information about which semester(s) the internship took place. Ninety‐three percent (n=587) took place during one semester, six percent (n=36) took place over two semesters, and two percent (n=10) nine took place over three semesters. Summer was the most popular time of year for students to complete internships with 550 (87%) taking place exclusively during the summer, and 37 more taking place over summer plus one or more semesters. Timing n % Fall 2014 20 3% Spring 2015 17 3% Summer 2015 550 87% Fall 2014, Spring 2015 9 1% Fall 2014, Summer 2015 3 0% Spring 2015, Summer 2015 24 4% Fall 2014, Spring 2015, Summer 2015 10 2% Qualifications Six hundred (90%) responses were recorded regarding the relationship between student’s major and internship.
[Show full text]
Ball Bearings and Parts Thereof from Japan and United Kingdom
UNITED STATES DEPARTMENT OF COMMERCE International Tr·ade Adminis tration Washington, D.C. 20230 A-588-804 A-421-801 Admin. Rev. 5/1/09-4/30/10 Public Document AD/CVD I: AFBs Team June 13, 2014 MEMORANDUM TO: Lynn Fischer Fox Deputy Assistant Secretary for Policy and Negotiations FROM: Christian Marsh ~ Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations SUBJECT: Issues and Decision Memorandum for the Antidumping Duty Administrative Reviews ofBall Bearings and Parts Thereof from Japan and the United Kingdom; 2009-2010 Summary We analyzed the case and rebuttal briefs of interested parties in the administrative reviews of the antidumping duty orders on ball bearings and parts thereof (ball bearings) from Japan and the United Kingdom for the period May 1, 2009, through April30, 2010. As a result of our analysis, we have made changes, including corrections of certain inadvertent programming and other errors, in the margin calculations. We recommend that you approve the positions we developed in the Discussion ofthe Issues section of this memorandum. Background On April21, 2011, the Department of Commerce (Department) published the preliminary results of the administrative reviews of the antidumping duty orders on ball bearings and parts thereof from Japan and the United Kingdom. 1 The period of reviews is May 1, 2009, through April30, 2010. We invited interested parties to comment on the Preliminary Results. We received case and rebuttal briefs from various parties to these reviews? On July 15, 2011 , the Department discontinued these reviews.3 1 See Ball Bearings and Parts ThereofF rom France, Germany, Italy, Japan, and the United Kingdom: Preliminary Results ofAntidumping Administrative and Changed-Circumstances Reviews, 76 FR 22372 (April21, 2011) (Preliminary Results).
[Show full text]
Online Internship Postings in the Northeast Jobsohio Network
Online Internship Postings in the Northeast JobsOhio Network March 2021 A total of 2,321 internship ads were posted online from February 14, 2021, through March 13, 2021, for northeast Ohio. This was an increase of 161 ads from the previous reporting period and a decrease of 63 ads compared to the same time period a year ago. The graph below shows historical trends for internship ads posted in this area over the last several years. 2450 2350 2250 2150 2050 1950 1850 1750 1650 1550 1450 1350 1250 1150 1050 950 850 Mid-Monthly Total Volume (4yr) 750 March 2017 September 2017 March 2018 September 2018 March 2019 September 2019 March 2020 September 2020 March 2021 Salary for Internship Ads Education for Internship Ads Salary Range Ads Education Range Ads Entry Level Jobs (less than $30K) 7.9% GED/High School 26.2% Middle Income Jobs ($30K-$49K) 36.9% Associate Level 8.4% Upper Middle Income Jobs ($50K-$79K) 37.9% Bachelor's Degree 59.5% High Income Jobs ($80K-$99K) 11.1% Master's Degree 3.2% Six Figure Jobs ($100K+) 6.3% Doctoral Degree 2.8% Top Certifications for Internship Ads Top Skills for Internship Ads Certifications Ads Skills Ads Driver's License 230 Analysis 740 Certified Pharmacy Technician 109 Innovation 612 Federal legislation 49 Operations 605 Occupational Safety & Health Administration Certification 23 Microsoft Office 425 Certified Public Accountant 23 Microsoft PowerPoint 384 Registered Pharmacist 19 Testing 322 HAZMAT 19 Mathematics 278 Association for Clinical Pastoral Education 17 Programming 260 Commercial Driver's License
[Show full text]
Student Posters and Annual Meeting Committees
EARLY CAREER POSTERS surface cavities, which replace the dense and orderly absorbed liquid layer in non-bubble flow. Therefore, introducing surface Influences of Adsorbed Water on the Interfacial morphology can further improve the effect on drag reduction. Tribological Phenomena in the Early Stage of Sliding Z.A. Subhi, Malaysia-Japan International Institute of Technology, Kuala Lumpur, Malaysia Tribological Properties of Additive Manufactured Surfaces are covered by adsorbed water layer due to ambient Ti6Al4V Against Tungsten Carbide Under Dry Condition humidity. In the tribology of micro contacts, frictional and X. Liang, Tsinghua University, Beijing, China adhesive properties are sensitive to the adsorbed water because With the development of additive manufacturing (AM technology, surface phenomena become more dominant than volumetric titanium alloy manufactured by AM is widely used in aviation phenomena and therefore the influences of adsorbed water on manufacturing. Although AM can achieve near net shape, the adhesion become dominant. This study aimed to explore the necessary machining is inevitable. In this paper, the tribological mechanism of humidity changes to influence the adhesion by the behaviors and wear mechanism of additive manufactured Ti6Al4V observation of the tribological behaviour during the very early against tungsten carbide under dry friction condition are studied. stage of sliding. In this study, a unidirectional ball-on-ball The influence of normal load and temperature on friction configuration tribo-contact simulator (T-CS) along with coefficient were studied. The results show that the effect of load atmospheric humidity controller, were used to simulate the micro- and temperature on friction coefficient is not obvious. We sliding between two asperities.
[Show full text]
2017 Investor Presentation Forward-Looking Statements and Non-GAAP Financial Information
2017 Investor Presentation Forward-looking statements and non-GAAP financial information This presentation includes “forward-looking” statements within the meaning of the federal securities laws. You can generally identify the company’s forward-looking statements by words such as “anticipate,” “believe,” “could,” “estimate,” “expect,” “forecast,” “outlook,” “intend,” “may,” “possible,” “potential,” “predict,” “project,” “seek,” “target,” “could,” “may,” “should” or “would” or other similar words, phrases or expressions that convey the uncertainty of future events or outcomes. The company cautions readers that actual results may differ materially from those expressed or implied in forward-looking statements made by or on behalf of the company due to a variety of factors, such as: the finalization of the company’s financial statements for the fourth quarter and three years ended December 31, 2016, including the actual impact of the adoption of mark-to-market accounting; the company’s ability to realize the expected benefits of the spinoff; the costs associated with being an independent public company, which may be higher than anticipated; deterioration in world economic conditions, or in economic conditions in any of the geographic regions in which the company conducts business, including additional adverse effects from global economic slowdown, terrorism or hostilities, including political risks associated with the potential instability of governments and legal systems in countries in which the company or its customers conduct business, and changes in currency valuations; the effects of fluctuations in customer demand on sales, product mix and prices in the industries in which the company operates, including the ability of the company to respond to rapid changes in customer demand, the effects of customer bankruptcies or liquidations, the impact of changes in industrial business cycles, and whether conditions of fair trade exist in U.S.
[Show full text]
“Small Changes Can Make Big Differences. Technology Helps Us Manage Our Costs and Get Better Yields Per Acre.”
MY 2018 ANNUAL REPORT Chahairmi an’n ssL Lettteer andannd 20018 Higghliightg s Noticece of Annnuanu lMl Meeetee ingng ProPr xyy Statementntt fofor thee AGCO Annual Meetiingg of Stoockholders INNOVATING THE Annual Reporp tot onFn Form 100-KK CUSTOMER EXPERIENCE “Small changes can make big differences. Technology helps us manage our costs and get better yields per acre.” 3 “The 20|20 monitor and Precision Planting technology on our White Planter are easy to use. They help us plant the right amount of seed, at the right spacing and best depth for even, consistent emergence. We’re excited VQUGGVJGDGPGƓVUQHRNCPVKPIYKVJ5OCTV(KTOGTUYJGP soil moisture, soil temperature, organic matter and %'%XCT[CETQUUCƓGNFŭ — Karen & Dale Dircksen, Double D Grain Farms LLC, Union City, Ohio, U.S. Read more about the Dircksens and how they rely on our machinery and smart-farming technology. Their story and additional customer experiences can be found at: AR2018.AGCOCORP.COM CHAIRMAN’S MESSAGE DEAR FELLOW SHAREHOLDERS, CUSTOMERS, DEALERS AND EMPLOYEES: #U+TGƔGEVQPQWTRTQITGUUQXGTVJGRCUV[GCT+ƓTUVYCPVVQ UC[VJCPM[QWHQT[QWTEQPVKPWGFEQOOKVOGPVVQCPFKPXGUVOGPV KP#)%1+CORTQWFQHYJCVYGCEEQORNKUJGFVQIGVJGTFWTKPI CUYGKPPQXCVGCPFJGNRHCTOGTUKORTQXGVJGKTGHƓEKGPE[ CPFRTQFWEVKXKV[CPF+COCNUQXGT[QRVKOKUVKECDQWVVJG QRRQTVWPKVKGUCJGCF+VũUGZEKVKPICPFITCVKH[KPIVQUGGHCTOGTU CETQUUVJGYQTNFVCMKPIQWTUNQICP;QWT#ITKEWNVWTG%QORCP[ VQJGCTVCPF+ETGFKVQWTRGQRNGHQTOCMKPIVJCVJCRRGP The value of our brands, our products, our distribution and our customer service was evident as we delivered substantially improved results despite a challenging global agricultural market. As our industry continues to evolve as farmers increasingly adopt smart-farming capabilities, our manufacturing, distribution, sales and product development teams executed exceptionally well to meet evolving customer needs. We are transforming our processes and customer interactions around an increasingly digital model. We are changing not only what we deliver to dealers and farmers, but also how we deliver it.
[Show full text]
2018 Investor Presentation Timkensteel: at a Glance
2018 Investor Presentation TimkenSteel: At a glance Overview Alloy steel bars (SBQ) ~75%1,2 Value-added solutions ~15%1 • Headquartered in Canton, Ohio TimkenSteel Applications Machining, honing Components • Annual melt capacity of ~2m tons & drilling • Only focused North American SBQ producer • Widest size range of SBQ bar Supply chain • Bearings • Energy CRA capability • Fuel injectors Production • Crankshafts • CV joints • Largest domestic capacity of seamless • Tri-Cone bits • Gear mechanical tube capability • Percussion bits High SBQ 2017 shipments by end market Seamless mechanical tubing ~10%1 QUALITY Other 18% Industria Low (Not SBQ) l Energy 36% 9% • Fasteners • Shopping carts • Hand tools • Table legs • Leaf springs • Reinforcing bar Non-TimkenSteel Applications Mobile 37% Source: TimkenSteel 1 As a percentage of 2017 shipments 2 Includes billets Broad size range strengthens our competitive position Approx. market sector size 3.5m tons 1.4m tons 0.8m tons 0.3m tons TimkenSteel Nucor - Memphis Steel Dynamics - Pittsboro Republic Steel Gerdau 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Bar Diameter (Inches) 6:1 Reduction1 – Machining Source: TimkenSteel internal estimates as of 12/31/2017 1 Reduction ratio is a critical quality measure for machining applications. Meeting our customers’ high-performance needs Value proposition Key customers • National Oilwell Varco • On and off-shore drilling and completion applications • Schlumberger • Offerings are valued and trusted by industry leaders • Halliburton (via distribution) Energy • Unique
[Show full text]