DOCSLIB.ORG

Item Description Pricing 1

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Item Description Pricing 1 Point Judith Contact: Jay Everson Testing Facility Marine Operations Lead 11 Sherman Rd (401) 795-5001 Wakefield, RI 02879 [email protected] Service ID Item Description Pricing Open transom, enclosed cabin with work 38' R/V Scooter tables, generator, marine head, subsea Base: $1,200 + $375/hour + fuel CMS 01 (with Captain and equipment hauler, A-Frame if needed; for (typical fuel cost is $100-350/day) Deckhand) testing local to Point Judith, RI Open transom, enclosed cabin with work 38' R/V Scooter Base: $1,200 + $375/hour + fuel tables, generator, marine head, subsea CMS 02 (with Captain and (typical fuel cost is $200-800/day) equipment hauler, A-Frame if needed; for Deckhand) R/T transit time is approx. 2 hours testing within 3 nautical miles of Block Island Open transom, enclosed cabin with work 38' R/V Scooter tables, generator, marine head, subsea Base: $1,200 + $375/hour + fuel CMS 03 (with Captain and equipment hauler, A-Frame if needed; for (typical fuel cost is $250-850/day) Deckhand) testing in southern Narragansett Bay, NUWC R/T transit time is approx. 4 hours Newport 11 Meter USMI Testing Enclosed cabin with work tables, 110v AC, $200/hour + fuel *RMS 01 RHIB (Local testing near 8'x15' working deck, stern winch. 2 vessels (includes vessel operator) Point Judith, RI) available 11 meter USMI Testing Enclosed cabin with work tables, 110v AC, $375/hour + fuel (includes vessel *RMS 02 RHIB (local testing near 8'x15' working deck, stern winch; 2 vessels operator and deckhand) Point Judith, RI) available 11 meter Zodiac 1110 Enclosed cabin with work table, 110v AC, 6'x $375/hour + fuel (includes vessel and *RMS 03 Hurricane (local testing 8' aft working deck, 5'x 8' fwd working deck; LARS operators) near Point Judith, RI) Mk 18 LARS Unit Vessel Mobilization to *RMM 01 Vessel will attend testing anywhere in Approx. 2 hours transit time + fuel (For USMI Southern Narragansett Narragansett Bay south of Prudence Island and dockage (if needed) and Zodiac) Bay (NUWC Newport) Vessel Mobilization to *RMM 02 Vessel will attend testing anywhere in Approx. 3 hours transit time + fuel (For USMI Northern Narragansett Narragansett Bay north of Prudence Island and dockage (if needed) and Zodiac) Bay *RMM 03 Vessel Mobilization to Vessel will attend testing within 3 NM of Block Approx. 1 hour transit time + fuel (For USMI and Zodiac) Block Island Island & dockage (if needed) Surcharge for use of vessels WIN Winter Surcharge $10/hour per vessel from Nov. 1 to Apr. 1 Professionally trained marine personnel with PS 01 Additional Deckhand technical background for on-water $175/hour operational support * Vessel option available to Government agencies and their Contractors with Government approval Prices subject to change without notice Charles River Analytics, Inc. 2021-01-28 1 www.cra.com Point Judith Contact: Jay Everson Testing Facility Marine Operations Lead 11 Sherman Rd (401) 795-5001 Wakefield, RI 02879 [email protected] Service ID Item Description Pricing Professionally trained personnel with experience in Electromechanical PS 02 fabricating and repairing complex $175/hour Technician Services uncrewed marine systems Experienced marine/project manager to develop PS 03 Operations Management and oversee testing goals, as well as manage project $200/hour logistics and safety Professionally trained ocean, mechanical, electrical, PS 04 Engineering Services and software engineers with experience in $200/hour developing advanced marine systems and solutions Experienced project/systems engineer to oversee all PS 05 Engineering Management $285/hour aspects of multi-disciplined engineering tasks Management of all accounts, including purchasing PS 06 Administration $150/hour and manpower Testing from fixed or floating docks, water depths to ME 01 Dockside Testing 10' available, 110v AC available with support from a $175/hour Charles River Analytics technician Large Equipment Launching of large equipment using 25 ton ME 02 Contact for Quote Launch/Recovery or 70 ton Marine Travel Lift Overnight dockage of floating marine equipment, ME 03 Dockage Contact for Quote 30A or 50A power and water available FE 01 Outdoor Equipment Storage Large gravel yard with water and power available Contact for Quote Secure storage and assembly space with a 5 ton fork Warehouse Use/ FE 02 truck, commercial scales, and a secured high-value Contact for Quote Indoor Equipment Storage asset repository Power tools, light machinery, desktop 3D printers, compressed air, high-voltage power supplies to FE 03 Fabrication Shop Contact for Quote support fabrication, hardware integration, and testing Equipped with hot air rework and soldering stations, FE 04 Electronics Lab oscilloscopes, and frequency analyzers, to support Contact for Quote fabrication and troubleshooting of electrical systems Contact for operational New London, CT, to Buzzards Bay, OP Maximum Vessel Op Area availability outside of listed out to Block I, and MV areas Charles River Analytics, Inc. 2021-01-28 2 www.cra.com.
Load more

Recommended publications
  • Chapter 3 Ship Compartmentation and Watertight Integrity
    CHAPTER 3 SHIP COMPARTMENTATION AND WATERTIGHT INTEGRITY Learning Objectives: Recall the definitions of terms watertight integrity, and how they relate to each other. used to define the structure of the hull of a ship and the You will also learn about compartment checkoff lists, numbering systems used for compartment number the DC closure log, the proper care of access closures designations. Identify the different types of watertight and fittings, compartment inspections, the ship’s draft, closures and recall the inspection procedures for the and the sounding and security patrol watch. The closures. Recall the requirements for the three material information in this chapter will assist you in conditions of readiness, the purpose and use of the completing your personnel qualification standards Compartment Checkoff List (CCOL) and damage (PQS) for basic damage control. control closure log, and the procedures for checking watertight integrity. COMPARTMENTATION A ship’s ability to resist sinking after sustaining Learning Objective: Recall the definitions of terms damage depends largely on the ship’s used to define the structure of the hull of a ship and the compartmentation and watertight integrity. When numbering systems used to identify the different these features are maintained properly, fires and compartments of a ship. flooding can be isolated within a limited area. Without compartmentation or watertight integrity, a ship faces The compartmentation of a ship is a major feature almost certain doom if it is severely damaged and the of its watertight integrity. Compartmentation divides emergency damage control (DC) teams are not the interior area of a ship’s hull into smaller spaces by properly trained or equipped.
    [Show full text]
  • WIND MEASURING SYSTEMS Using Xdi-N Indicators
    APPLICATION NOTES WIND MEASURING SYSTEMS using XDi-N indicators Document no.: 4189350080C Wind Measuring Systems Application notes, using XDi-N indicators Table of contents GENERAL INFORMATION .......................................................................................................... 4 WARNINGS, LEGAL INFORMATION AND SAFETY ............................................................................... 4 LEGAL INFORMATION AND DISCLAIMER ........................................................................................... 4 DISCLAIMER ................................................................................................................................. 4 SAFETY ISSUES ............................................................................................................................ 4 ELECTROSTATIC DISCHARGE AWARENESS ..................................................................................... 4 FACTORY SETTINGS ..................................................................................................................... 4 ABOUT THE APPLICATION NOTES........................................................................................... 5 GENERAL PURPOSE ...................................................................................................................... 5 INTENDED USERS ......................................................................................................................... 5 CONTENTS/OVERALL STRUCTURE .................................................................................................
    [Show full text]
  • View the Presentation
    Presentation prepared for The Collectors Club New York The History of the Square-Rigged Sailing Vessels Jonas Hällström FRPSL 19 March 2014 The History of the Square-Sigged Sailing Vessels This booklet is the handout prepared for the presentation given to The Collectors Club in New York on 19 March 2014. Of 65 printed handouts this is number Presentation prepared for The Collectors Club The History of the Square-Rigged Sailing Vessels Jonas Hällström 19 March 2014 Thanks for inviting me! Jonas Hällström CCNY member since 2007 - 2 - The History of the Square-rigged Sailing Vessels 1988 First exhibited in Youth Class as Sailing Ships 2009 CHINA FIP Large Gold (95p) 2009 IBRA FEPA Large Gold (95p) 2010 JOBURG FIAP Large Gold (96p) 2010 ECTP FEPA Grand Prix ECTP 2013 AUSTRALIA FIP Large Gold (96p) European Championship for Thematic Philately Grand Prix 2010 in Paris The ”Development” (Story Line) as presented in the Introductory Statement (”Plan”) - 3 - Thematic The History of the Development Square-rigged Sailing Vessels The concept for this Storyline presentation (the slides) Thematic Information Thematic Philatelic item to be knowledge presented here Philatelic Information Philatelic knowledge The Collectors Club New York The legend about the The History of the sail and the Argonauts Square-rigged Sailing Vessels (introducing the story) The legend says that the idea about the sail on a boat came from ”The Papershell” (lat. Argonaute Argo). Mauritius 1969 The Collectors Club New York - 4 - The legend about the sail and the Argonauts (introducing the story) In Greek mythology it is said that the Argonauts sailed with the ship “Argo”.
    [Show full text]
  • R/V Weatherbird Fio.Usf.Edu/Vessels/Rv-Weatherbird
    R/V Weatherbird Fio.usf.edu/vessels/rv-weatherbird The R/V Weatherbird II is the flagship of the FIO fleet. The 115-foot, 194-ton vessel is equipped with advanced laboratories, oceanographic devices and sensor technology designed to enable scientists and students to study and learn about various as- pects of the ocean’s biological, chemical, geological and physical characteristics. Researchers use the vessel to support advanced studies on the myriad of complex issues impacting global and coastal oceans, as well as life in the sea. The Weatherbird II has berths for 13 people, 780 square feet of work- ing deck space, 200 square feet of wet laboratory space and is capable of voyaging throughout the Gulf of Mexico and Caribbean. Specifications: Kongsberg K-Pos DP-11 Dynamic Positioning System Beam: 28 ft (8.5m) AIS equipped (Furuno FA-150) Draft: 8’6” (2.6m) Nav: Trimble SPS356 GNSS, Garmin GPS, Northstar 941x Cruising Speed: 10 knots KVH V7 Mini-VSAT Broadband, Iridium ITU1000, Sirius/XM Maneuvering Speed: .5-10 knots Port and Starboard side pole mount receivers on main deck Cruising Range: 3500 miles (5630 km) Bow thruster: Shottel SPJ57 azimuthing thruster Endurance: 12 days Fresh & saltwater in labs and on main deck Main Engines: (2) Cummins QSK19 680 HP (Refit in 2015) Aft Winch: Dynacon cantilever winch; Starboard A-Frame winches: Marco hydraulic research winch, SeaMac hydro winch Generators: Twin GM 6-71, 75 kW Main winch: 3/8”, 3x19 torque balanced wire rope 110 and 208 VAC—100 amp Electrical System Aft frame: 14.5’ W x 23’H, SWL: 10,000 lbs.
    [Show full text]
  • Triton2 Operator Manual
    Triton2 Operator Manual ENGLISH www.bandg.com Preface Disclaimer As Navico is continuously improving this product, we retain the right to make changes to the product at any time which may not be reflected in this version of the manual. Please contact your nearest distributor if you require any further assistance. It is the owner’s sole responsibility to install and use the equipment in a manner that will not cause accidents, personal injury or property damage. The user of this product is solely responsible for observing safe boating practices. NAVICO HOLDING AS AND ITS SUBSIDIARIES, BRANCHES AND AFFILIATES DISCLAIM ALL LIABILITY FOR ANY USE OF THIS PRODUCT IN A WAY THAT MAY CAUSE ACCIDENTS, DAMAGE OR THAT MAY VIOLATE THE LAW. Governing Language: This statement, any instruction manuals, user guides and other information relating to the product (Documentation) may be translated to, or has been translated from, another language (Translation). In the event of any conflict between any Translation of the Documentation, the English language version of the Documentation will be the official version of the Documentation. This manual represents the product as at the time of printing. Navico Holding AS and its subsidiaries, branches and affiliates reserve the right to make changes to specifications without notice. Trademarks NMEA® and NMEA 2000® are registered trademarks of the National Marine Electronics Association. Copyright Copyright © 2016 Navico Holding AS. Warranty The warranty card is supplied as a separate document. In case of any queries, refer to the brand website of your display or system: www.bandg.com. Preface | Triton2 Operator manual 3 Compliance statements This equipment complies with: • CE under EMC directive 2014/30/EU • The requirements of level 2 devices of the Radio communications (Electromagnetic Compatibility) standard 2008 The relevant Declaration of conformity is available in the product's section at the following website: www.bandg.com.
    [Show full text]
  • Nevada Boating Laws
    OF NEVADA BOATING LAWS Sponsored by Copyright © 2019 Kalkomey Enterprises, LLC and its divisions and partners, www.kalkomey.com The Department of Wildlife is responsible for the safety education of Nevada boaters. The BOAT NEVADA safe boating program is recognized nationally and approved by the National Association of State Boating Law Administrators. Completing a boating safety course will make your time on the water safer and more enjoyable. Many insurance companies offer a discount for successful completion. Nevada boaters have three ways to become certified in boating safety with SafeNEVADA Boating Program Over the Internet… NEVADALearn what you need to be a safe boat operator online! 1. The complete course with exciting visuals awaits you on the Internet. Interactive graphics help you learn and retain information on boating safely in Nevada. Successfully complete the online test, and you will receive a State of Nevada boating safety certificate by mail. There is a nominal fee for online certification. Start today at www.ndow.org/boat/ or www.boat-ed.com/nevada In a classroom… Share the learning experience with other boaters and 2. a qualified instructor. Call the Nevada Department of Wildlife to locate the next classroom course in your area. Northern Nevada, call 775-688-1500 Southern Nevada, call 702-486-5127 By correspondence… Study at home with the Boat Nevada manual. Then take 3. the certification exam at home and mail it to the Nevada Department of Wildlife for grading and certification. Northern Nevada, call 775-688-1500 Southern Nevada, call 702-486-5127 Copyright © 2019 Kalkomey Enterprises, LLC and its divisions and partners, www.kalkomey.com OF NEVADA BOATING LAWS NOTE: The information in this handbook is intended to be used only as a summary of the boating laws and regulations in Nevada.
    [Show full text]
  • Concrete Terminology
    DIVISION 3 - CAST IN PLACE CONCRETE TERMINOLOGY A. CONCRETE: A mixture of 1 part Portland Cement ( 22 lbs ) 2 Parts Dry Sand ( 41 lbs ) 3 Parts Dry Aggregate ( 70 lbs ) ½ Part Water ( 10 lbs ) Admixtures ( 7 lbs ) Total Weight Per Cu. Foot = 150 lbs. Area of 1 CU. FT. 1,728 cu. Inches 1. CAST IN PLACE CONCRETE: Concrete that is formed, poured and cured in it’s permanent position. 2. CURED CONCRETE: Concrete which has reached dehydration and obtained it’s maximum compressive strength. 3. GREEN CONCRETE: Concrete which remains hydrated and is in it’s earliest setting stage and has not hardened or cured appreciably. 4. LIGHTWEIGHT CONCRETE: A concrete mixture of substantially lower unit weight and compressive strength than that made from crushed stone or rock aggregate. Typically used on upper floors or roof tops where normal compressive strength is not a requirement and weight is a factor. 5. MONOLITHILIC CONCRETE: A single pour which includes the footing and slab concrete in a single pour . 6. POST-TENSION CONCRETE: A method of stressing reinforced concrete by which the tendons or cables are tightened after the concrete slab has hardened and in place. 24 7. PRE-CAST CONCRETE: Concrete which is cast and cured in a place other than it’s final resting position. ( Beams, Columns, Slabs, Lintels ) 8. PRE-STRESSED CONCRETE: A process of preparing concrete slabs and beams for extra strength by pouring concrete over tightly drawn steel cables, steel rods or tendons. 9. REINFORCED CONCRETE: Concrete with added materials such as steel rod, wire mesh, fiber mesh, dowel bars, expanded metal fabric, or cold drawn wire cable which act together with the concrete to resist cracking or movement B.
    [Show full text]
  • Ockam System Manual
    OCKAM SYSTEM MANUAL Edition of February 17, 2009 Copyright © 1984-2009 by Ockam Instruments, Inc., All rights reserved. No part of this book may be reproduced in any form without permission in writing from the publisher. Printed in the United States of America Ockam Instruments Inc. 215 Research Drive Milford, CT 06460 (203) 877-7453 (203) 878-0572 (Fax) http://www.ockam.com Revised 2/17/09 PAGE 1 READ THIS FIRST Thank you for considering Ockam Instruments, the world’s best sailing instrument system. Sailboat instruments, like the boats they go on are at least semi-custom products. Each installation will differ from others in capability and features. Ockam uses a modular approach to allow the greatest flexibility in capability. A professional electronics expert is usually needed to properly design, install and set up the system. • To read a description of the Ockam Instrument system, read Sections 1 & 2. • For installation, read Section 3. • Calibration? Go to Section 3 - Calibration. • Got a problem with the system? Go to Section 3 - Troubleshooting. Page 2 Revised 2/17/09 Table of Contents Section 1 - System Architecture.................................................................................................11 Systems................................................................................................................................... 12 Displays ................................................................................................................................... 12 Control ....................................................................................................................................
    [Show full text]
  • Boats of Currituck (Richards and Stewart, Eds., 2016) Program in Maritime Studies Report No
    Boats of and Stewart, eds., 2016) Currituck (Richards University) 23 (East Carolina Program in Maritime Studies Report No. In the fall of 2013 and the summer of 2014, graduate students from East Carolina University’s Program in Maritime Students, in collaboration Boats of Currituck: with the UNC-Coastal Studies Institute, carried out a project recording six watercraft from a collection of historical small watercraft collected and An Analysis of Six Watercraft from maintained by the Whalehead Preservation Trust in Currituck County, North Carolina. the Whalehead Preservation Trust Collection This volume contains six chapters that serve as the technical reports Edited by Nathan Richards and David J. Stewart concerning these six vessels. Each chapter reports the process of recording the boats and their histories and also engages in interpretation and analysis of the form, function, and methods of construction. In some cases, examinations of modifications, repairs, and wear and tear are also made. The publication intends to communicate the results of maritime-focused historic preservation activities concerning a small part of Currituck County’s legacy of boat-building. Project Partners: ISBN 978-1-365-44608-5 90000 Program in Maritime Studies 7813659 446085 East Carolina University Greenville, North Carolina Research Report No. 23 (2016) BOATS OF CURRITUCK: AN ANALYSIS OF SIX WATERCRAFT FROM THE WHALEHEAD PRESERVATION TRUST COLLECTION Nathan Richards and David J. Stewart (editors) Chapters by: Jeremy Borrelli Ryan Bradley Kara Davis Chelsea Freeland Phillip Hartmeyer Sara Kerfoot Kelci Martinsen Allison Miller Michele Panico Adam Parker Julie Powell Alyssa Reisner William Sassorossi Emily Steedman Sonia Valencia Jeneva Wright Caitlin Zant i Research Report No.
    [Show full text]
  • Scott on Canopies..Pub
    IN THE SHOP the only way to tell when you have actually After the empennage, the sliding canopy on the SBS air- caused a change (other than putting the frame back on planes probably raises more questions than any other instal- the fuselage). If you can detect a change while you are lation. Fitting a structure of welded steel spaghetti to a hand- using your hands and feet, you probably did way too built fuselage is an exercise in patience and perseverance. much. Given the inevitable variations between individual frames, roll-bars and fuselages, it is not possible to give dimensions The first thing to check is the profile of the lower side that will work every time. Instead, we caution builders to slow tubes (these may have a round or a square cross- down and work carefully from “first principles.” The amount of section, depending on the era of your kit. The more effort and time you spend on preliminary positioning and recent ones are square). Viewed from above, they alignment, adjusting both the canopy frame and the canopy should very closely match the shape of the longerons. skirts, makes a big difference to the quality of the final fit of You can check by setting the frame on the fuselage the canopy. I recently asked Scott McDaniels, the Possessor and putting a 24" straightedge vertical against the side of True Knowledge at the Temple of the Sliding Canopy, for a of the fuselage every 3". Add or subtract bend to make few pearls. Here’s his advice: them match as closely as possible.
    [Show full text]
  • Medieval Shipping
    Medieval Shipping A Wikipedia Compilation by Michael A. Linton Contents 1 Caravel 1 1.1 History ................................................. 1 1.2 Design ................................................ 1 1.3 See also ................................................ 2 1.4 References ............................................... 2 1.5 External links ............................................. 2 2 Carrack 6 2.1 Origins ................................................ 8 2.2 Carracks in Asia ........................................... 10 2.3 Famous carracks ............................................ 10 2.4 See also ................................................ 12 2.5 References ............................................... 12 2.6 Further reading ............................................ 12 2.7 External links ............................................. 12 3 Cog (ship) 13 3.1 Design ................................................. 14 3.2 History ................................................. 14 3.3 Gallery ................................................. 15 3.4 See also ................................................ 15 3.5 References ............................................... 15 3.5.1 Footnotes ........................................... 15 3.5.2 Bibliography ......................................... 15 3.6 External links ............................................. 15 4 Fire ship 16 4.1 History ................................................. 16 4.1.1 Ancient era, first uses ....................................
    [Show full text]
  • INSTALLATION INSTRUCTIONS 2019 Full/Front Enclosure / Double Canopy Tracker Marine Party Barge 210 DL/DL3 Regency
    INSTALLATION INSTRUCTIONS 2019 Full/Front Enclosure / Double Canopy Tracker Marine Party Barge 210 DL/DL3 Regency PARTS LIST DOUBLE CANOPY FULL ENCLOSURE 1 Bow Canopy 1 Aft Canopy with Zippers 1 Bow Canopy Boot 1 Package Screw Studs 1 Aft Canopy with Front Zipper 1 Aft Curtain 1 Hardware Package 1 Bow Canopy with Zippers 1 Bow Frame 2 Side Side Curtains (1 Port, 1 Starboard) 2 Bow Side Curtains (1 Port, 1 Starboard) 1 Bow Curtain 1 Bow Frame TOOLS REQUIRED Measuring Tape Center Punch Drill 21/64" Drill Bit Pencil Phillips Screwdriver Wrench WARNING CAUTION NOTE INDICATES POTENTIAL HAZARD INDICATES POTENTIAL INDICATES SPECIAL INFORMATION THAT COULD RESULT IN DEATH HAZARD THAT COULD TO MAKE MAINTENANCE EASIER OR INJURY RESULT IN BOAT DAMAGE OR INSTRUCTIONS CLEARER Dowco Marine, Inc. | 1610 Frisco Drive, Lebanon MO 65536 | dowcomarine.com | (800) 404-5252 140291-00 | 05/18 NOTE: This enclosure is designed to fit the 2019 Tracker Marine Regency 210 DL/DL3 Regency Signature Pontoon Boat that has the aft canopy brackets, deck buttons, and eye straps in the following locations: Main Aft Bracket 70" Rear Aft Button 42" Forward Aft Button 23 1/2" Measurements should be taken from the end of the back of fence for Aft Canopy Brackets and as shown below for bow canopy brackets and buttons in the following locations: Main to Main 102" Main to Hold-down Arm 23.25" All measurements are taken to the center of the brackets unless indicated otherwise. AFT CANOPY FIG. 1 BOW CANOPY 70” 102” 23.25” 42” 23 1/2” A B NOTE: Your pontoon has been pre-assembled with an aft canopy and aft canopy frame from Tracker Marine.
    [Show full text]