DOCSLIB.ORG

Exhibitor Profiles

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text

Load more

National Electronics Week 11 – 12 March 2014, Gallagher Convention Centre, Midrand Exhibitor profiles Allan Mckinnon & Associates Deltronics Stand number: B17 Contact: Vangeli Glyptis Stand number: 4-18 Contact: Rob Sterling Tel: 083 309-9785 | [email protected] | Tel: 021 705-7741 | [email protected] | www.deltronics.co.za www.ama-sa.co.za & www.testerion.co.za Deltronics is an innovative contract electronics design company specialising in the design of custom products, embedded systems and Allan McKinnon and associates have been supplying the South African wireless technologies. We focus on fully understanding all aspects of the electronics industry with equipment, consumables and process clients’ requirements. Deltronics is a distributor of Altium Designer, Tasking assistance for over 30 years. Products, JTAG Technologies, JTAG Studio Live and Topor Auto Router. We’re also a registered Altium, Tasking and JTAG Technologies training Asic Design Services facility with certified trainers experienced from entry level to FPGA and Simulation. Deltronics provides product training and will guide you to Stand number: 4-54 Contact: Steve Santamarina successful designs. Visit our stand for competitions and specials on all Tel: 011 315-8316 | [email protected] | www.asic.co.za products listed above. ASIC Design Services distributes electronic components and electronic design automation software and offers design, consulting and training Dizzy Enterprises services. Our product lines include Microsemi (FPGAs, multi-chip Stand number: 4-38 Contact: Dane du Plooy packages (memories, processors), Mentor Graphics (PCB layout, analysis, HDL simulation, wiring harness software), HALO (magnetics), Holt (avionics Tel: 072 435-0005 | [email protected] | www.dizzy.co.za ICs), DownStream Technologies (CAM software) and XJTAG (PCB test The Proteus Design Suite is a schematic capture and PCB design equipment). We offer specialised design services for ASIC, FPGA and package which also features exceptional circuit-simulation capabilities. PCB layout and training courses from Doulos (VHDL). Labcenter Electronics (creators of Proteus) pioneered a technology which allows microcontrollers to be simulated together with any analogue and digital circuitry which is connected to them, in real-time. This allows Avnet Kopp users to prototype and simulate their entire design on the computer, before incurring any physical hardware prototyping costs. It also provides Stand number: 4-27 Contact: Arnold Perumal uniquely powerful debugging capabilities which greatly ease embedded Tel: 011 319-8600 | [email protected] | www.avnet.co.za firmware development. Once a design has been proven in the simulator, PCB layout is assisted by a built-in shape-based autorouter. Avnet Kopp, South Africa’s leading distributor of electronic components, will once again exhibit exciting innovations and new products from the world’s leading semiconductor and IPE manufacturers. Experience the EE Publishers future, experience the impossible, dabble in wireless, and add easy connectivity, WiFi, Bluetooth. Experience HMI, USB and full graphics touch Stand number: 4-51 Contact: Irene Blythe screen. Experience the future of development and stand a chance to Tel: 011 543-7000 | [email protected] | www.ee.co.za win amazing prizes by visiting our stand. EE Publishers is a South African publishing house with four market- leading technical magazines Energize, Vector, PositionIT and EngineerIT Concilium Technologies which provide readers with valuable insights into market and industry dynamics with relevant and focused information, and this has given Stand number: 4-30 Contact: Thab’sile Ndlovu EE Publishers a reputation for excellence and high reader credibility. EngineerIT is a technical and business-to-business publication with print, Tel: 012 678-9202 | [email protected] | www.concilium.co.za on-line, email and mobile editions. The publication covers information Concilium Technologies, winner of the 2013 African Frost & Sullivan and communication technology, including telecommunications, Award for customer service leadership, will once again be exhibiting at networking, broadcasting, computing and software; electronics design, the National Electronics Week. We will be showcasing the latest Agilent manufacture, test and components; measurement and instrumentation; bench and handheld test equipment, including the award-winning automation and control; and amateur radio, aerospace technology and FieldFox handheld spectrum/network analyser, the new trueform arbitrary astronomy. EngineerIT serves its target audience and provides a voice for waveform generators and a range of handheld instruments. Highlighting various and professional bodies, among others the Institute of Information the advances Agilent has made in the oscilloscope market, we will be Technology Professionals South Africa (IITPSA), Wireless Access Providers running a competition with great handheld instrument prizes for the Association (WAPA), the British Computer Society (BCS), the Information fastest to capture a glitch just by using their finger on the revolutionary Technology Association (ITA); the IEEE SA Section, the National Laboratory 4000X oscilloscope’s touch GUI! Don’t miss out! Association (NLA), and the National Metrology Institute of South Africa. Current Automation Graphic PLC Stand number: 4-41 Contact: Etienne van der Westhuizen Stand number: 4-28 Contact: Rudi Koekemoer Tel: 010 591-1713 | [email protected] | www.rectifier.co.za Tel: 012 665-4860 | [email protected] | www.graphic.plc.uk The power supply industry is one where reliability in long-term use, Central Circuits is a Graphic PLC manufacturer of printed circuit boards, functionality and cost are all of great importance, but it is reliability that specialising in high technology and reliability, including rigid, flex, and differentiates the truly superior products. Mean Well is a leading standard flex-rigid. Markets we service include military, aerospace, formula one, in switching power supply manufacturers in the world. Product lines include medical, broadcasting and space. We have purpose-built sites in the AC/DC switching power supplies, DC/DC converters, DC/AC inverters and UK, US China and Europe, offering application engineering, prototype battery chargers. Total quality assurance and customer satisfaction are to volume services, including quick turn. Technologies we focus on the central goals of Mean Well. This belief was one of the main motivating include stacked and sequential microvias, copper and resin filled vias, factors for Current Automation to become the largest importer of the CIC, high-speed materials, thermal management, buried resistance and Mean Well range of products. capacitance, embedded technologies. 4646 FebruaryFebruary 20142012 -- EngineerITEngineerIT National Electronics Week 11 – 12 March 2014, Gallagher Convention Centre, Midrand Exhibitor profiles K Measure RF Design Stand number: 4-16 Contact: Mardine Kok Stand number: 4-34 Contact: Andrew Hutton Tel: 087 230-0034 | [email protected] | www.kmeasure.co.za Tel: 021 555-8400 | [email protected] | www.rfdesign.co.za K Measure will exhibit its entire range of innovative test and measurement RF Design is a supplier of wireless and RF/microwave components, with instruments, offering the opportunity for visitors to view them first-hand. offices in Cape Town, Durban and Midrand. We have endeavoured to This year K Measure introduces their newest models, including Uni-Trend strengthen our product lines in the areas of wireless communications, multimeters, Amprobe meters, specialised electrical testers and more. mobile data transmission, and telemetry applications. Our product Their popular Hantek oscilloscopes will also be featured. Also on show offerings extend from component level, through OEM modules to will be logic analysers, waveform generators, bus converters, protocol analysers and vector network analysers. For the duration of the expo K complete sub-systems, working closely with our system integration Measure will also offer a promotion on the DSO-5202B (200 MHz, 1GS/s) partners, assuring them of success. We represent a balanced portfolio benchtop oscilloscope, at R7000, discounted from R8600. of the world’s premier wireless data communications, RF/microwave components and sub-systems manufacturing companies. KwikTic Truth Electronics Stand number: 4-23A Contact: David Pickavance Stand number: B 19 Contact: Terence Ruthnam Tel: +44 785 229-3999 | [email protected] | www.kwiktic.com Tel: 083 284-4457 | [email protected] | KwikTic is a software suite which improves productivity and quality with www.truthelectronics.co.za minimum effort. Create clear interactive work instructions faster by de-skilling the assembly process, "right first time" production, reduce Truth Electronics is a superior supplier of equipment and consumables training requirements, paperless (no distribution issues with a single for electronics manufacturing industries. Truth prides itself by representing central database), full version control, and traceability of all production and being associated with leading global manufacturers in their activities. Other KwikTic features include self-learning test repair (de-skills respective fields, supplying quality and innovative products and solutions. diagnostics), data mining that helps detect the reasons for issues, and We advise on the most effective solutions that help manufacturers to OEE. Unsure how? Believe
Recommended publications
  • Multicap 9 Schematic Capture User Guide

    Multicap 9 Schematic Capture User Guide

    Electronics WorkbenchTM Multicap 9 Schematic Capture User Guide TitleShort-Hidden (cross reference text) February 2006 371889A-01 Support Worldwide Technical Support and Product Information ni.com National Instruments Corporate Headquarters 11500 North Mopac Expressway Austin, Texas 78759-3504 USA Tel: 512 683 0100 Worldwide Offices Australia 1800 300 800, Austria 43 0 662 45 79 90 0, Belgium 32 0 2 757 00 20, Brazil 55 11 3262 3599, Canada 800 433 3488, China 86 21 6555 7838, Czech Republic 420 224 235 774, Denmark 45 45 76 26 00, Finland 385 0 9 725 725 11, France 33 0 1 48 14 24 24, Germany 49 0 89 741 31 30, India 91 80 41190000, Israel 972 0 3 6393737, Italy 39 02 413091, Japan 81 3 5472 2970, Korea 82 02 3451 3400, Lebanon 961 0 1 33 28 28, Malaysia 1800 887710, Mexico 01 800 010 0793, Netherlands 31 0 348 433 466, New Zealand 0800 553 322, Norway 47 0 66 90 76 60, Poland 48 22 3390150, Portugal 351 210 311 210, Russia 7 095 783 68 51, Singapore 1800 226 5886, Slovenia 386 3 425 4200, South Africa 27 0 11 805 8197, Spain 34 91 640 0085, Sweden 46 0 8 587 895 00, Switzerland 41 56 200 51 51, Taiwan 886 02 2377 2222, Thailand 662 278 6777, United Kingdom 44 0 1635 523545 For further support information, refer to the Technical Support Resources and Professional Services page. To comment on National Instruments documentation, refer to the National Instruments Web site at ni.com/info and enter the info code feedback.
  • Printed Circuit Board Design: a Guide for EE210 Students

    Printed Circuit Board Design: a Guide for EE210 Students

    Printed Circuit Board Design: A Guide for EE210 Students So, you took EE210 and learned all about how to capture schematics and perform simulations in Multisim, but now you want to make a PCB for your new circuit design. The 30-minute run through of Ultiboard left you scratching your head and you want to know how to make a PCB for REAL. This guide will show you the complete process for designing a printed circuit board, which includes schematic capture, simulation, and layout. Depending on the circuit you are making a PCB for, this process should take 3-5 hours to complete. What is a PCB? A printed circuit board, or PCB, is an assembly that mechanically supports electronic components while electrically connecting them through conductive traces. PCBs are typically constructed of a fiberglass substrate called FR4 that is covered in copper on both sides. The substrate acts as the mechanical core of the PCB that holds everything in place, while the copper layers are used to form traces, which are the copper connections that electrically connect each component Why make a PCB? You have constructed many circuits on a breadboard as part of your EE210 lab and you may wonder: Why go through all the trouble of making a PCB? There are several reasons to move a circuit from a breadboard to a PCB. PCBs are more mechanically stable, offer better performance if well designed, and can be mass produced. For these reasons, PCB design is often an essential part of designing electronics. What you will need • Computer with Multisim and Ultiboard • Printer Both of these materials can be found in Electrical Engineering Department computer labs.
  • Introduction to Multisim Schematic Capture and SPICE Simulation

    Introduction to Multisim Schematic Capture and SPICE Simulation

    Introduction to Multisim Schematic Capture and SPICE Simulation By: Erik Luther Janell Rodriguez Introduction to Multisim Schematic Capture and SPICE Simulation By: Erik Luther Janell Rodriguez Online: < http://cnx.org/content/col10369/1.3/ > CONNEXIONS Rice University, Houston, Texas This selection and arrangement of content as a collection is copyrighted by Erik Luther, Janell Rodriguez. It is licensed under the Creative Commons Attribution 2.0 license (http://creativecommons.org/licenses/by/2.0/). Collection structure revised: September 26, 2006 PDF generated: October 26, 2012 For copyright and attribution information for the modules contained in this collection, see p. 81. Table of Contents 1 Introduction 1.1 Objectives for the National Instruments Multisim Course . 1 1.2 Interactive Schematic Capture and Layout in National Instruments Multisim . 4 1.3 Exercise: Introducing the National Instruments Multisim Environment . .. 9 2 Schematic Capture 2.1 Electrical and Electronic Components Available in National Instruments Multisim . 11 2.2 Exercise: Finding and Placing Components in National Instruments Multisim . .. 19 2.3 Electrical and Electronic Component Manipulation in National Instruments Mul- tisim .......................................................................................21 2.4 Exercise: Drawing A Schematic in National Instruments Multisim . 26 3 Circuits 3.1 Creating Circuits in Multisim . .. 29 3.2 Using Electrical Rules Checking in National Instruments Multisim . 31 3.3 Creating and Using Sub-Circuits in National Instruments Multisim . 33 3.4 Generating Schematic Reports and Annotation in National Instruments Multisim . 36 4 Simulation 4.1 Simulating Circuits using the SPICE in National Instruments Multisim . 39 4.2 Instrumenting a Circuit Simulation in National Instruments Multisim . .. 44 4.3 Exercise: Instrumenting Simulated Circuits in National Instruments Multisim .
  • The Printed Circuit Designer's Guide To... Executing

    The Printed Circuit Designer's Guide To... Executing

    Executing Complex PCBs 2nd Edition Scott Miller Freedom CAD Services The Printed Circuit Designer's Guide to...™ Executing Complex PCBs 2nd Edition Scott Miller FREEDOM CAD SERVICES INC. © 2019 BR Publishing Inc. All rights reserved. BR Publishing Inc. dba: I-Connect007 942 Windemere Dr. NW Salem, OR 97304 U.S.A. ISBN: 978-0-9980402-4-0 Visit I-007eBooks.com for more books in this series. I-Connect007.com Peer Reviewers John R. Watson, CID Building Control Division Legrand, North America John R. Watson, CID, has worked in the PCB design field for nearly 20 years. In that time, he has held almost every position available. As the senior PCB engineer, John leads a team of 50+ designers in multiple divisions spanning the world in the Building Control Division of Legrand North America. Although he is a highly sought out speaker and writer, John’s passion still lies with mentoring and teaching, espe- cially young people. Stephen V. Chavez, CID/CID+ IPC Designers Council Executive Board Stephen V. Chavez, CID/CID+, is a member of the IPC Designers Council Executive Board and a lead electrical designer at a large, globally recognized aerospace company. He is an IPC CID+ certified designer and has been involved with the PCB design industry, both domestically and internationally, for over 28 years. Further, Stephen is an IPC CID designer certification instructor (CIT) with EPTAC Corporation and VP of the Phoenix chapter of the IPC Designers Council. He has also been a keynote speaker at several design forums at IPC APEX EXPO and other industry confer- ences and seminars and has published several industry articles to date.
  • Сапр Altium Designer 6

    Сапр Altium Designer 6

    СКВОЗНОЕ ПРОЕКТИРОВАНИЕ ФУНКЦИОНАЛЬНЫХ УЗЛОВ РЭС НА ПЕЧАТНЫХ ПЛАТАХ В САПР ALTIUM DESIGNER 6 Санкт-Петербург 2008 Федеральное агентство по образованию Санкт-Петербургский государственный электротехнический университет “ЛЭТИ” ___________________________________________________ В. Ю. СУХОДОЛЬСКИЙ СКВОЗНОЕ ПРОЕКТИРОВАНИЕФУНКЦИОНАЛЬНЫХ УЗЛОВ РЭС НА ПЕЧАТНЫХ ПЛАТАХ В САПР ALTIUM DESIGNER 6 Учебное пособие Часть 1 Санкт-Петербург 2008 УДК 621.____ ББК С Суходольский В.Ю. С___ Сквозное проектирование функциональных узлов РЭС на печат- ных платах в САПР Altium Designer 6. Часть 1.: Учебное пособие. СПб.: Изд-во СПбГЭТУ “ЛЭТИ”, 2008. 148 с. ISBN __________. Дается обзор основных возможностей интегрированной САПР функциональных узлов РЭС на печатных платах Altium Designer 6 и рассматриваются практические приемы работы в процессе выполнения этапов сквозного конструкторского проектирования функциональных узлов РЭС на печатных платах. Предназначено для студентов направ- лений 210200 “Радиотехника” и 210201 “Проектирование и технология электронных средств”, а также может быть полезно инженерам и кон- структорам НИИ и КБ радиоэлектронного профиля. УДК 621.__________________ ББК ______________ Рецензенты: кафедра ТиМ СПбГУТ им. проф. М. А. Бонч-Бруевича; д-р техн. наук, проф. П. П. Бескид (Российский государственный гидроме- теорологический университет). Утверждено редакционно-издательским советом университета в качестве учебного пособия ISBN ВВЕДЕНИЕ Программные продукты САПР австралийской фирмы Protel Technolo- gies, предназначенные для проведения сквозного проектирования функцио- нальных узлов РЭС известны с 90-х гг. На рынок последовательно выходили версии Tango PRO, Protel 99 SE (1999 г.), Protel DXP (2002-2004 гг.). Права на продукты Protel в 2005 г. перешли к фирме Altium Ltd., и в настоящее время версия Protel DXP [1], получившая определенное развитие, вышла на рынок под именем Altium Designer 6. Это современная мощная “сквозная” САПР, превосходящая многие другие по эффективности.
  • XSCHEM PDF Manual

    XSCHEM PDF Manual

    XSCHEM 0.29 Manual and Tutorials XSCHEM : schematic capture and netlisting EDA tool Xschem is a schematic capture program, it allows creation of hierarchical representation of circuits with a top down approach . By focusing on interfaces, hierarchy and instance properties a complex system can be described in terms of simpler building blocks. A VHDL or Verilog or Spice netlist can be generated from the drawn schematic, allowing the simulation of the circuit. Key feature of the program is its drawing engine written in C and using directly the Xlib drawing primitives; this gives very good speed performance, even on very big circuits. The user interface is built with the Tcl-Tk toolkit, tcl is also the extension language used. Features hierarchical schematic drawings, no limits on size any object in the schematic can have any sort of properties (generics in VHDL, parameters in Spice or Verilog) new Spice/Verilog primitives can be created, and the netlist format can be defined by the user tcl extension language allows the creation of scripts; any user command in the drawing window has an associated tcl comand VHDL / Verilog / Spice netlist, ready for simulation Behavioral VHDL / Verilog code can be embedded as one of the properties of the schematic block, Xschem runs on UNIX systems with X11 and Tcl-Tk toolkit installed. Documentation XSCHEM manual Download Current release Old XSCHEM releases on Sourceforge SVN: svn checkout svn://repo.hu/xschem/trunk License 1 XSCHEM 0.29 Manual and Tutorials The software is released under the GNU GPL,
  • A Visual Tutorial for Schematics

    A Visual Tutorial for Schematics

    A Tutorial for Schematics - the PSpice Schematic Capture Utility * Schematics Netlist X_U1 $N_0002 $N_0003 $N_0004 $N_0005 $N_0001 UA741 V_VCC $N_0004 0 dc 10 V_VEE $N_0005 0 dc -10 V_Vin $N_0006 0 dc 0 ac 1 R_R1 $N_0006 $N_0007 2732 R_R2 $N_0007 $N_0002 2732 R_R4 $N_0003 $N_0001 1.52k R_R3 0 $N_0003 10k C_C1 $N_0007 $N_0001 1n C_C2 0 $N_0002 1n X_U2 $N_0008 $N_0009 $N_0004 $N_0005 vout UA741 R_R1B $N_0001 $N_0010 2732 R_R2B $N_0010 $N_0008 2732 Outline/Contents PART I. PSPICE FUNDAMENTALS I. Introductory Remarks ……………………………………………………………… 3 A. Spice, PSpice and Schematics B. Font Conventions C. The Passive Sign Convention and PSpice II. What is Schematics and what can it do for you? ………………………………….... 4 III. Units and Unit Prefixes ………………………………………………………..…… 4 PART II. CONSTRUCTING AND SIMULATING A DC CIRCUIT I. Drawing Circuit Diagrams with Schematics …………………………………….….. 5 A. Getting Parts …………………………………………………………………….. 6 B. Changing a Part’s Name and Attributes ………………………………………… 7 C. Arranging Parts and Pin Numbers ………………………………………………. 8 D. Wiring Parts ……………………………………………………………………... 8 E. The Analog Ground ………………………………………………………………9 F. Saving Schematics ………………………………………………………………. 9 II. Getting Results ………………………....………………………………………..….. 10 A. The Netlist, Arrgh! B. Naming Nodes …………………………………………………………………. 10 C. Displaying Results on the Schematic ………………………………………….. 11 D. Printing your Drawing …………………………………………………………. 11 III. Running PSpice from Schematics and Choosing an Analysis Type ……………….. 13 A. Obtaining a Bias Point Detail ……………………………………………… 14 B. Obtaining a dc Sweep ……………..………………….…………………… 15 IV. Running and Using PROBE ……………………………………………………….. 16 A. Adding Traces B. Using Markers C. Other PROBE Features - Label, Cursor, Copying and Saving ……………….. 19 V. Printing your Drawing. ……………………………..……………………………… 12 VI. Your First Schematic ………………………………………………………………. 20 PART III. CONSTRUCTING AND SIMULATING AN AC CIRCUIT I. Obtaining an ac Analysis and making Bode Plots ………………………………….
  • Eeschema.Pdf

    Eeschema.Pdf

    Eeschema Eeschema ii January 22, 2019 Eeschema iii Contents 1 Introduction to Eeschema 1 1.1 Description ...................................................... 1 1.2 Technical overview .................................................. 1 2 Generic Eeschema commands 3 2.1 Mouse commands ................................................... 4 2.1.1 Basic commands ............................................... 4 2.1.2 Block operations ............................................... 4 2.2 Hotkeys ........................................................ 5 2.3 Grid .......................................................... 7 2.4 Zoom selection .................................................... 7 2.5 Displaying cursor coordinates ............................................. 8 2.6 Top menu bar ..................................................... 8 2.7 Upper toolbar ..................................................... 8 2.8 Right toolbar icons .................................................. 10 2.9 Left toolbar icons ................................................... 11 2.10 Pop-up menus and quick editing ............................................ 11 3 Main top menu 14 3.1 File menu ....................................................... 14 3.2 Preferences menu ................................................... 15 3.2.1 Manage Symbol Library Tables ........................................ 16 3.2.1.1 Add a new library ......................................... 16 3.2.1.2 Remove a library .......................................... 16 3.2.1.3
  • Starting with Geda at the Cambridge University Engineering Department

    Starting with Geda at the Cambridge University Engineering Department

    Starting with gEDA at the Cambridge University Engineering Department July 29, 2005 1 CONTENTS CONTENTS Contents 1 Introduction 6 2 gEDA Manager 9 3 Prerequisite 12 4 First steps with Schematic Capture 14 4.1 Add a component . 14 4.2 Create a component . 15 4.3 Edit the attributes . 17 4.4 Copy the components . 18 4.5 Wire the Schematic . 18 4.6 Add a title border . 19 4.7 Print out the Schematic . 20 5 First steps with PCB Layout 22 5.1 Create a PCB file . 22 5.2 Import the schematic . 23 5.3 Route the PCB . 24 5.4 Print out the PCB . 29 6 First steps with Gerber Viewer 32 6.1 View the gerber files . 32 7 First steps with NGSPICE 35 7.1 Gathering the symbols and the models . 35 7.2 Creating the Schematic . 36 7.3 Generation of the netlist . 38 7.4 Simulate your circuit with NGSPICE . 38 7.5 Simulate your circuit with GSPICEUI . 39 8 Frequently Asked Questions (FAQ) 43 8.1 About Schematic Capture . 43 8.1.1 I can't find the component I need! . 43 8.2 About gsch2pcb . 43 8.2.1 gsch2pcb return “Bad expression”? . 43 8.3 About PCB Layout . 43 8.3.1 My component look weird! . 43 8.3.2 What are the rule to make a PCB? . 43 8.3.3 What If I change my schematic after having created my PCB? . 44 8.3.4 How to route the PCB by hand? . 44 2 CONTENTS CONTENTS 8.4 About Spice .
  • Integration of a Digital Modulator and a Class-D Amplifier”

    Integration of a Digital Modulator and a Class-D Amplifier”

    Universidad de Málaga Escuela Técnica Superior de Ingeniería de Telecomunicación Programa de Doctorado en Ingeniería de Telecomunicación TESIS DOCTORAL Cost-Effective and Energy-Efficient Techniques for Underwater Acoustic Communication Modems Autor: Muhammad Yousuf Irfan Zia Directores: Pablo Otero Roth Miguel Ángel Luque Nieto Málaga 2020 AUTOR: Muhammad Yousuf Irfan Zia https://orcid.org/0000-0003-4181-5997 EDITA: Publicaciones y Divulgación Científica. Universidad de Málaga Esta obra está bajo una licencia de Creative Commons Reconocimiento-NoComercial- SinObraDerivada 4.0 Internacional: http://creativecommons.org/licenses/by-nc-nd/4.0/legalcode Cualquier parte de esta obra se puede reproducir sin autorización pero con el reconocimiento y atribución de los autores. No se puede hacer uso comercial de la obra y no se puede alterar, transformar o hacer obras derivadas. Esta Tesis Doctoral está depositada en el Repositorio Institucional de la Universidad de Málaga (RIUMA): riuma.uma.es Escuela de Doctorado DECLARACIÓN DE AUTORÍA Y ORIGINALIDAD DE LA TESIS PRESENTADA PARA OBTENER EL TÍTULO DE DOCTOR D./Dña MUHAMMAD YOUSUF IRFAN ZIA Estudiante del programa de doctorado INGENIERÍA DE TELECOMUNICACIÓN de la Universidad de Málaga, autor/a de la tesis, presentada para la obtención del título de doctor por la Universidad de Málaga, titulada: COST-EFFECTIVE AND ENERGY-EFFICIENT TECHNIQUES FOR UNDERWATER ACOUSTIC COMMUNICATION MODEMS Realizada bajo la tutorización de PABLO OTERO ROTH y dirección de PABLO OTERO ROTH y MIGUEL ÁNGEL LUQUE NIETO, DECLARO QUE: La tesis presentada es una obra original que no infringe los derechos de propiedad intelectual ni los derechos de propiedad industrial u otros, conforme al ordenamiento jurídico vigente (Real Decreto Legislativo 1/1996, de 12 de abril, por el que se aprueba el texto refundido de la Ley de Propiedad Intelectual, regularizando, aclarando y armonizando las disposiciones legales vigentes sobre la materia), modificado por la Ley 2/2019, de 1 de marzo.
  • Best Free Pcb Cad

    Best Free Pcb Cad

    Best free pcb cad click here to download Now, before we get into the five best and free PCB design programs, it is to design schematics, you can do no wrong by going with TinyCAD. Do you need a free PCB design software or tool to put in practice the new electronic PCBWeb is a free CAD application for designing and manufacturing. Free PCB CAD Software. This is a comparison of printed circuit board design software. Our criteria for including a PCB CAD program are: There should be a. CircuitMaker is the best free PCB design software by Altium for Open Source Hardware Designers, Hackers, Makers, Students and Hobbyists.​Projects · ​Components · ​Blog · ​Hubs. 10 best free pcb designing software open source software download. TinyCAD helps user to draw circuit diagrams and export it as a PCB. Eagle is a very good piece of software. Specifically, the non-free versions scale up to much bigger targets. Meanwhile, you have all of those What is the best free PCB designing application. I always recomment FreePCB, but it lacks one component you Anyone who thinks its the best more than likely hasn't used anything else. The world of PCB CAD software has been very active in recent years – so much so that it's easy to lose track of all the players and products. PCB design: you need a CAD program for your project, but which is best? There are They range from free or inexpensive to high-end/premium. They come. Free CAD Software. Start by downloading our free CAD software.
  • Computer Aided Design of Electronic Devices

    Computer Aided Design of Electronic Devices

    TOMSK POLYTECHNIC UNIVERSITY O.A. Kozhemyak, D.N. Ogorodnikov COMPUTER AIDED DESIGN OF ELECTRONIC DEVICES It is recommended for publishing as a study aid by the Editorial Board of Tomsk Polytechnic University Tomsk Polytechnic University Publishing House 2014 1 UDC 621.38(075.8) BBC 31.2 K58 Kozhemyak O.A. K58 Computer aided design of electronic devices: study aid / O.A. Kozhemyak, D.N. Ogorodnikov; Tomsk Polytechnic University. – Tomsk: TPU Publishing House, 2014. – 130 p. This textbook focuses on the basic notions, history, types, technology and applications of computer-aided design. Methods of electronic devices simulation, automated design of power electronic devices and components, constructive- technological design are considered and discussed. Some features of the popular electronics CADs are also shown. There are a lot of practical examples using CADs of electronics. The textbook is designed at the Department of Industrial and Medical Electronics of TPU. It is intended for students majoring in the specialty „Electronics and Nanoelectronics‟. UDC 621.38(075.8) BBC 31.2 Reviewer Cand.Sc, Head of Laboratory, Tomsk State University of Control Systems and Radioelectronics Aleksandr V. Osipov © STE HPT TPU, 2014 © Kozhemyak O.A., Ogorodnikov D.N., 2014 © Design. Tomsk Polytechnic University Publishing House, 2014 2 Introduction. CAD around Us ........................................................................... 5 What is CAD? ................................................................................................ 5 Overview