DOCSLIB.ORG

Electronic Waste and Television Recycling Opportunities – Updated 10/25/19

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Electronic Waste and Television Recycling Opportunities – Updated 10/25/19 Electronic Waste and Television Recycling Opportunities – updated 10/25/19 The businesses shown in this table recycle a variety of electronic items on an ongoing basis. Please contact any business you are interested in to confirm current program requirements, program limitations and any charges that may apply. Television recycling information is shown on the second page of this brochure. • Best Buy – Lake Geneva, (262) 348-9269 *Some charges apply Items accepted: Computer-related items, other electronics, printer cartridges, rechargeable batteries, cell phones, TVs For details about their television recycling services, please see the information on the second page of this brochure. • Best Buy – Greenfield, (414) 281-3434 *Some charges apply Items accepted: Computer-related items, other electronics, printer cartridges, rechargeable batteries, cell phones, TVs For details about their television recycling services, please see the information on the second page of this brochure. • Universal Recycling Technologies – Janesville, (608) 754-3400 *Some charges apply Items accepted: Computer-related items, other electronics, rechargeable and alkaline batteries, cell phones, TVs For details about their television recycling services, please see the information on the second page of this brochure. • Janesville Recycling Center, – Janesville, (608) 756-0001 *Some charges apply Items Accepted: Computer-related item, other electronics, TVs For details about their television recycling services, please see the information on the second page of this brochure. • Recycle Technologies – Milwaukee, (800) 305-3040 *Some charges apply Will accept: Computer-related items, other electronics, TVs For details about their television recycling services, please see the information on the second page of this brochure. • Junk King – Pick-Up service only, (414) 375-4333, Milwaukee, WI *Charges apply Items accepted: Computer-related items, other electronics, cell phones, TVs For details about their television recycling services, please see the information on the second page of this brochure • Toner and Inc – Delavan, (262) 728-8570 Items accepted: Computer-related items, printer cartridges, rechargeable and alkaline batteries, cell phones – all no charge This business accepts TVs (under 32” = $25.00, over 32” = $50.00) & Computer Monitors ($15) • Computer Recycling Services – New Berlin, (262) 784-5679 *No charge Items accepted: Computer-related items, other electronics, cell phones This business does not accept TVs. • Goodwill – Delavan, (262) 728-5668 *No charge Items accepted: Computer-related items, small electronic items that are in good working condition This business accepts working flat panel TVs free of charge. • Stateline Recycling – Janesville, (608) 754-7715 *No charge Will accept: Computer-related items, & other electronics This business does not accept TVs. • Mercury Waste Solutions – 21211 Durand Ave, Union Grove, (800) 741-3343 *No charge Will accept: Computer-related items, & other electronics This business does not accept TVs. • Milwaukee PC – 4160 S 108th Street, Greenfield (414) 427-6965 *Monitors & Printers have a surcharge Will accept: Desktops, laptops, printers, monitors This business does not accept TVs. • Legacy Electronics – 9825 Durand Ave, Sturtevant, WI 262-930-4228 *25.00 per TV Will accept: Computer-related items, & other electronics The Village of Waterford does not endorse or otherwise sponsor any of the businesses mentioned in this brochure. Any omissions are unintentional. The businesses mentioned have not been reviewed by the Village of Waterford for compliance with applicable federal, state, or local environmental laws. Electronic Waste and Television Recycling Opportunities – updated 10/25/19 The businesses shown in this table recycle televisions on an ongoing basis. Please contact any business you are interested in to confirm current program requirements, program limitations and any charges that may apply. Recycling opportunities for other electronic items are shown on the first page of this brochure. Company Name Charges and Program Limitations Hours for Drop Off Notes Phone Number (*Charges are subject to change – Web Site please contact company for current fees) Best Buy Consumers may bring in up to two units Monday – Saturday: If you order a TV from 4610 S 76th Street per day, per household. A $25* recycling 10:00 a.m. – 9:00 p.m. Best Buy for delivery Greenfield fee is charged for each unit. Best Buy Sunday: they will remove your (414) 281-3434 does not accept tube TVs with screens 10:00 a.m. – 8:00 p.m. old TV at the same www.bestbuy.com/recycle greater than 32”, flat panel screens time. greater than 50” or console televisions of any size. Best Buy Consumers may bring in up to two units Monday – Saturday: If you order a TV from 700 N Edwards Blvd per day, per household. A $25* recycling 10:00 a.m. – 9:00 p.m. Best Buy for delivery Lake Geneva fee is charged for each unit. Best Buy Sunday: they will remove your 262-348-9269 does not accept tube TVs with screens 10:00 a.m. – 8:00 p.m. old TV at the same www.bestbuy.com/recycle greater than 32”, flat panel screens time. greater than 50” or console televisions of any size. Universal Recycling Techn Samsung brand TV’s may be dropped off Monday through If you have an Apple ologies free-of-charge*. Friday: TV, call for recycling 2535 Beloit Ave Charges for other TV’s: 8:00 a.m. to 4:00 p.m. details. Apple TV Janesville $15.00* for TV’s of any size or screen recycling may be free 608-754-3400 type of charge. www.urtsolutions.com No consoles or projection TV’s Janesville Recycling Center Any television - 35¢* per pound Monday through Accepts cash or check 340 Blackbridge Rd Friday only Janesville 7:30 a.m. to 3:30 p.m. 608-756-0001 Recycle Technologies Any television - 45¢* per pound Monday through 1480 Springdale Rd Friday: Milwaukee 7:30 a.m. – 3:30 p.m. 1-800-305-3040 www.recycletechnologies.com Junk King Any television – will pick up for a fee Monday through Book online and save Milwaukee ($99*), call or go online for an exact Friday: more: 1-414-375-4333 quote. 8:00 a.m. – 4:00 p.m. www.junk-king.com www.junk-king.com If you have more than a TV to get rid of, call to have A rep come to your house and provide a free* quote for removal of all your junk including your TV. Tonor and Inc Accepts TV’s: Under 32” = $25* Monday through 1424 Geneva St Over 32” = $50* Friday: Delevan, WI 53115 Computer Monitors = $15* 8:00 a.m. – 6:00 p.m. 262-728-8570 Accepts printer cartridges, batteries, cell Sat 9 – 5 www.tonorandinc.com phones at no charge Sun 10 - 4.
Load more

Recommended publications
  • MOSFET Operation Lecture Outline
    97.398*, Physical Electronics, Lecture 21 MOSFET Operation Lecture Outline • Last lecture examined the MOSFET structure and required processing steps • Now move on to basic MOSFET operation, some of which may be familiar • First consider drift, the movement of carriers due to an electric field – this is the basic conduction mechanism in the MOSFET • Then review basic regions of operation and charge mechanisms in MOSFET operation 97.398*, Physical Electronics: David J. Walkey Page 2 MOSFET Operation (21) Drift • The movement of charged particles under the influence of an electric field is termed drift • The current density due to conduction by drift can be written in terms of the electron and hole velocities vn and vp (cm/sec) as =+ J qnvnp qpv • This relationship is general in that it merely accounts for particles passing a certain point with a given velocity 97.398*, Physical Electronics: David J. Walkey Page 3 MOSFET Operation (21) Mobility and Velocity Saturation • At low values of electric field E, the carrier velocity is proportional to E -the proportionality constant is the mobility µ • At low fields, the current density can therefore be written Jqn= µ qpµ !nE+!p E v n v p • At high E, scattering limits the velocity to a maximum value and the relationship above no longer holds - this is termed velocity saturation 97.398*, Physical Electronics: David J. Walkey Page 4 MOSFET Operation (21) Factors Influencing Mobility • The value of mobility (velocity per unit electric field) is influenced by several factors – The mechanisms of conduction through the valence and conduction bands are different, and so the mobilities associated with electrons and holes are different.
    [Show full text]
  • Fundamentals of MOSFET and IGBT Gate Driver Circuits
    Application Report SLUA618A–March 2017–Revised October 2018 Fundamentals of MOSFET and IGBT Gate Driver Circuits Laszlo Balogh ABSTRACT The main purpose of this application report is to demonstrate a systematic approach to design high performance gate drive circuits for high speed switching applications. It is an informative collection of topics offering a “one-stop-shopping” to solve the most common design challenges. Therefore, it should be of interest to power electronics engineers at all levels of experience. The most popular circuit solutions and their performance are analyzed, including the effect of parasitic components, transient and extreme operating conditions. The discussion builds from simple to more complex problems starting with an overview of MOSFET technology and switching operation. Design procedure for ground referenced and high side gate drive circuits, AC coupled and transformer isolated solutions are described in great details. A special section deals with the gate drive requirements of the MOSFETs in synchronous rectifier applications. For more information, see the Overview for MOSFET and IGBT Gate Drivers product page. Several, step-by-step numerical design examples complement the application report. This document is also available in Chinese: MOSFET 和 IGBT 栅极驱动器电路的基本原理 Contents 1 Introduction ................................................................................................................... 2 2 MOSFET Technology ......................................................................................................
    [Show full text]
  • The Transistor
    Chapter 1 The Transistor The searchfor solid-stateamplification led to the inventionof the transistor. It was immediatelyrecognized that majorefforts would be neededto understand transistorphenomena and to bring a developedsemiconductor technology to the marketplace.There followed a periodof intenseresearch and development, duringwhich manyproblems of devicedesign and fabrication, impurity control, reliability,cost, and manufacturabilitywere solved.An electronicsrevolution resulted,ushering in the eraof transistorradios and economicdigital computers, alongwith telecommunicationssystems that hadgreatly improved performance and that were lower in cost. The revolutioncaused by the transistoralso laid the foundationfor the next stage of electronicstechnology-that of silicon integratedcircuits, which promised to makeavailable to a massmarket infinitely more complexmemory and logicfunctions that could be organizedwith the aid of softwareinto powerfulcommunications systems. I. INVENTION OF THE TRANSISTOR 1.1 Research Leading to the Invention As World War II was drawing to an end, the research management of Bell Laboratories, led by then Vice President M. J. Kelly (later president of Bell Laboratories), was formulating plans for organizing its postwar basic research activities. Solid-state physics, physical electronics, and mi­ crowave high-frequency physics were especially to be emphasized. Within the solid-state domain, the decision was made to commit major research talent to semiconductors. The purpose of this research activity, according
    [Show full text]
  • How to Select a Capacitor for Power Supplies
    CAPACITOR FUNDAMENTALS 301 HOW TO SELECT A CAPACITOR FOR POWER SUPPLIES 1 Capacitor Committee Upcoming Events PSMA Capacitor Committee Website, Old Fundamentals Webinars, Training Presentations and much more – https://www.psma.com/technical-forums/capacitor Capacitor Workshop “How to choose and define capacitor usage for various applications, wideband trends, and new technologies” The day before APEC, Saturday March 14 from 7:00AM to 6:00PM Capacitor Industry Session as part of APEC “Capacitors That Stand Up to the Mission Profiles of the Future – eMobility, Broadband” Tuesday March 17, 8:30AM to Noon in New Orleans Capacitor Roadmap Webinar – Timing TBD – Latest in Research and Technology Additional info here. Short Introduction of Today‘s Presenter Eduardo Drehmer Director of Marketing FILM Capacitors Background: • Over 20 years experience with knowledge on +1 732 319 1831 Manufacturing, Quality and Application of Electronic Components. [email protected] • Responsible for Technical Marketing for Film Capacitors www.tdk.com 2018-09-25 StM Short Introduction of Today‘s Presenter Edward Lobo was born in Acushnet, MA in 1943 and graduated from the University of Massachusetts in Amherst in 1967 with a BS in Chemistry. Ed worked for Magnetek, Aerovox and CDE where he is currently Chief Engineer for New Product Development. Ed Lobo Ed has served for over 52 years in Chief Engineer, New Product capacitor product development. He holds [email protected] 14 US patents involving capacitors. 4 ABSTRACT This presentation will guide individuals selecting components for their Electronic Power Supplies. Capacitors come in a wide variety of technologies, and each offers specific benefits that should be considered when designing a Power Supply circuit.
    [Show full text]
  • Power MOSFET Basics by Vrej Barkhordarian, International Rectifier, El Segundo, Ca
    Power MOSFET Basics By Vrej Barkhordarian, International Rectifier, El Segundo, Ca. Breakdown Voltage......................................... 5 On-resistance.................................................. 6 Transconductance............................................ 6 Threshold Voltage........................................... 7 Diode Forward Voltage.................................. 7 Power Dissipation........................................... 7 Dynamic Characteristics................................ 8 Gate Charge.................................................... 10 dV/dt Capability............................................... 11 www.irf.com Power MOSFET Basics Vrej Barkhordarian, International Rectifier, El Segundo, Ca. Discrete power MOSFETs Source Field Gate Gate Drain employ semiconductor Contact Oxide Oxide Metallization Contact processing techniques that are similar to those of today's VLSI circuits, although the device geometry, voltage and current n* Drain levels are significantly different n* Source t from the design used in VLSI ox devices. The metal oxide semiconductor field effect p-Substrate transistor (MOSFET) is based on the original field-effect Channel l transistor introduced in the 70s. Figure 1 shows the device schematic, transfer (a) characteristics and device symbol for a MOSFET. The ID invention of the power MOSFET was partly driven by the limitations of bipolar power junction transistors (BJTs) which, until recently, was the device of choice in power electronics applications. 0 0 V V Although it is not possible to T GS define absolutely the operating (b) boundaries of a power device, we will loosely refer to the I power device as any device D that can switch at least 1A. D The bipolar power transistor is a current controlled device. A SB (Channel or Substrate) large base drive current as G high as one-fifth of the collector current is required to S keep the device in the ON (c) state. Figure 1. Power MOSFET (a) Schematic, (b) Transfer Characteristics, (c) Also, higher reverse base drive Device Symbol.
    [Show full text]
  • Electronics and Computer Technology
    Electronics and Computer Technology The Electronics and Computer Technology Department offers several concentrations in electronics and computer technology that are designed to prepare students for a variety of high-tech job/career opportunities in the fields of engineering and technology; electronics technology; computer technology; telecommunication technology; and related technologies. The Electronics and Computer Technology Department offers an associate degree program in engineering technology with an emphasis in electronics, computers, and telecommunications. Technology certificates offered in areas of specialization include: electronics technology, computer technology, telecommunication technology, networking technology, electronic communication technology, and industrial electronics technology. Certificates/certifications offered in specific areas of electronics, computers, and related technology include: Certified Electronics Technician (Associate CET), A+ Certified Computer Service Technician, N+ Certified Networking Technician, CISCO Certified Network Associate (CCNA), CISCO Certified Network Professional (CCNP), Microsoft Certified Systems Engineer (MCSE), Certified Fiber Optics Installer, (FOIC), Electronics Communications (WCM, FCC license) and Digital and Microprocessor Electronics. Career Opportunities Electronics Engineering Technologist, Computer Engineering Technologist, Network Engineering Technologist, Telecommunications Engineering Technologist, Certified Electronics Technician - CET, A+ Certified Computer Technician,
    [Show full text]
  • SI Series Snap-In Elctrolytic Capacitors | NTE Electronics, Inc
    SNAP−IN MOUNT ALUMINUM ELECTROLYTIC SI SERIES SUBMINIATURE MECHANICAL SPECIFICATIONS (SI: Snap−in) Marking: The SI Snap−in series subminiature aluminum electrolytic ca- Consists of series type, nominal capacitance, rated pacitors are especially suitable for applications requiring high ca- voltage, temperature range, anode and/or cathode pacitance, low cost, and very small size. In fact, you’ll find these identification, vendor identification. capacitors in some of the most demanding applications, from Recommended Cleaning Solvents: precision medical electronics and automobiles to the newest personal computers and disk drives. Chlorofluorocarbon solvents used to remove flux from They operate over a broad temperature range and are available printed circuit boards can penetrate the capacitor end− in either blister pack or bulk. seals, cause corrosion when voltage is applied and ca- pacitor failure. Avoid halogenated solvents and consid- RATINGS er these alternatives: Clean the capacitors with Capacitance Range: 47µf to 33,000µf water/detergent or cleaning solvents free of halogen Tolerance: ±20% groups such as alcohol or terpene solution, or mount the capacitor after board cleaning. Voltage Range: 16V to 450V PERFORMANCE SPECIFICATIONS CASE SIZE AND DIMENSIONS: Operating Temperature Range: −40°C to +85°C (−40°F to +185°F) Leakage Current: I ≤ 3 x √CV (measured after 5 minutes @ rated voltage and +20°C (+68°F) I = Leakage Current (µA) C = Nominal Capacitance (µf) V = Rated Voltage (V) Capacitance Tolerance (M): ±20% measured at +20°C (+68°F),
    [Show full text]
  • Compact Mosfets for Consumer Electronics Analog Power Has Proven Itself As a World-Class MOSFET Mosfets Are Used Throughout Consumer Electronics
    Small Footprint Energy-saving Power MOSFETs Analog Power specializes in cost-effective power management solutions using low RDS(on) silicon technology in both leading-edge and industry-standard packages. With N- and P-Channel MOSFETs, 20-V through 800-V, manufactured in world-class wafer fabs and assembly facilities, and packages from the industry-leading DFN- 1.6x1.6 through the TO-247, we provide solutions for a wide range of applications. Now in its 15 th year of business, Compact MOSFETs for Consumer Electronics Analog Power has proven itself as a world-class MOSFET MOSFETs are used throughout consumer electronics. Applications include reverse supplier, and is a qualified vendor battery protection, switching power from different sources such as an AC adapter at many major electronics and batteries, and turning off loads such as backlighting when they are not needed. companies worldwide. Analog Power produces powerful compact MOSFETs ideal for these applications. Key Features: • Small Footprint, high current • N and P Channel MOSFETs with RDS ratings down to 1.8V Gate to Source • Dual MOSFETs in one package reduce PC Board area even further • Integrated ESD protection available Part VDS RDS ID Package, Type AMB420N 20 V 30 m Ohm 6.9 A DFN1.6x1.6 Single P MOSFET AMA921P -20 V 79 m Ohm 4.5 A DFN2x2 Dual P MOSFET (2mm 2 per FET) AM2307PE -20 V 31 m Ohm 5.2 A SOT-23 P MOSFET with ESD Protection AM3940N 40 V 58 m Ohm 3.5 A TSOP-6 Dual N MOSFET Low Voltage LED Lighting and Display Backlighting LED lighting is approximately 5X the efficiency of incandescent lighting.
    [Show full text]
  • Capacitor and Inductors
    Capacitors and inductors We continue with our analysis of linear circuits by introducing two new passive and linear elements: the capacitor and the inductor. All the methods developed so far for the analysis of linear resistive circuits are applicable to circuits that contain capacitors and inductors. Unlike the resistor which dissipates energy, ideal capacitors and inductors store energy rather than dissipating it. Capacitor: In both digital and analog electronic circuits a capacitor is a fundamental element. It enables the filtering of signals and it provides a fundamental memory element. The capacitor is an element that stores energy in an electric field. The circuit symbol and associated electrical variables for the capacitor is shown on Figure 1. i C + v - Figure 1. Circuit symbol for capacitor The capacitor may be modeled as two conducting plates separated by a dielectric as shown on Figure 2. When a voltage v is applied across the plates, a charge +q accumulates on one plate and a charge –q on the other. insulator plate of area A q+ - and thickness s + - E + - + - q v s d Figure 2. Capacitor model 6.071/22.071 Spring 2006, Chaniotakis and Cory 1 If the plates have an area A and are separated by a distance d, the electric field generated across the plates is q E = (1.1) εΑ and the voltage across the capacitor plates is qd vE==d (1.2) ε A The current flowing into the capacitor is the rate of change of the charge across the dq capacitor plates i = . And thus we have, dt dq d ⎛⎞εεA A dv dv iv==⎜⎟= =C (1.3) dt dt ⎝⎠d d dt dt The constant of proportionality C is referred to as the capacitance of the capacitor.
    [Show full text]
  • Navy Electricity and Electronics Training Series
    NONRESIDENT TRAINING COURSE SEPTEMBER 1998 Navy Electricity and Electronics Training Series Module 1—Introduction to Matter, Energy, and Direct Current NAVEDTRA 14173 DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited. Although the words “he,” “him,” and “his” are used sparingly in this course to enhance communication, they are not intended to be gender driven or to affront or discriminate against anyone. DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited. PREFACE By enrolling in this self-study course, you have demonstrated a desire to improve yourself and the Navy. Remember, however, this self-study course is only one part of the total Navy training program. Practical experience, schools, selected reading, and your desire to succeed are also necessary to successfully round out a fully meaningful training program. COURSE OVERVIEW: To introduce the student to the subject of Matter, Energy, and Direct Current who needs such a background in accomplishing daily work and/or in preparing for further study. THE COURSE: This self-study course is organized into subject matter areas, each containing learning objectives to help you determine what you should learn along with text and illustrations to help you understand the information. The subject matter reflects day-to-day requirements and experiences of personnel in the rating or skill area. It also reflects guidance provided by Enlisted Community Managers (ECMs) and other senior personnel, technical references, instructions, etc., and either the occupational or naval standards, which are listed in the Manual of Navy Enlisted Manpower Personnel Classifications and Occupational Standards, NAVPERS 18068. THE QUESTIONS: The questions that appear in this course are designed to help you understand the material in the text.
    [Show full text]
  • What Is Future Scope of PCB Fabrication & Manufacturing In
    Publication Since 2012 | ISSN: 2321-9939 | ©IJEDR 2020 Year 2020, Volume 8, Issue 2 What is Future Scope of PCB Fabrication & Manufacturing in Industries 1Manish Ranjan, 2Sumit Kumar Singh 1Student, 2Student G L Bajaj Group of Institutions, Mathura _____________________________________________________________________________________________________ Abstract - Printed circuit board (PCB) is base of any electronics/electrical equipment. A PCB provides the connectivity to the electronic component such as resistor, capacitor, coils, pots, diodes, FET, transistor, ICs, transformer etc. to form a complete electronic circuit. In the present scenario, the existence of electronics equipment’s cannot be imagined without a PCB. The PCBs are not only providing the connectivity among the electronic components but also reduces the size and increases the efficiency of the electronic equipment. Broadly the PCBs may be divided in two categories i.e. single layer PCBs and multi-layer PCBs. One can easily find the contribution of electronic industries in each and every field of our daily life i.e. entertainment, communication, education, R&D, Public Services, Defence, Transport, Agriculture, health care services etc. With the growing demand of electronic equipment’s/appliances in every sphere of human beings the electronic industry is growing up with a very fast rate. Similarly, the demand of micro servicing industries such as assembling/mounting of electronic component on PCBs to meet the requirement of the small/medium/large scale electronic industries is also increasing. This Paper Discuss what is the future scope of PCB board fabrication and manufacturing in industries. Our Conclusion show that the PCB manufacturing and fabrication is very fast growth in future. keywords - PCB board, fabrication, manufacturing, PCB design industry segment, future scope, growth rate, _____________________________________________________________________________________________________ 1.
    [Show full text]
  • Electronics and Electrical Engineering Laboratory
    NISTR 7568 Programs, Activities, and Accomplishments March 2009 NISTIR 7568 ELECTRONICS AND ELECTRICAL ENGINEERING LABORATORY U.S. Department of Commerce Gary Locke, Secretary National Institute of Standards and Technology March 2009 Patrick D. Gallagher, Deputy Director INDEX Electronics and Electrical Engineering Laboratory at a Glance . 6 Director’s Message . 7 EEEL Strategic Technical Area: Energy . 8 EEEL Strategic Technical Area: Bioelectronics . 9 EEEL Strategic Technical Area: Nanotechnology. 10 EEEL Strategic Technical Area: Spintronics. 11 EEEL Strategic Technical Area: Homeland Security . 12 Office of Law Enforcement Standards . 14 Office of Microelectronics Programs . 16 Semiconductor Electronics Division . 19 Power Device and Thermal Metrology . 20 Micro-Nano-Technology (MNT) . 22 Nanobiotechnology . 24 CMOS Device and Reliability . 26 Macro Electronics . 28 Nanoelectronic Device Metrology. 30 Infrastructure for Integrated Electronics Design and Manufacturing . 32 Knowledge Facilitation . 34 Optoelectronics Division. 37 Display Metrology . 38 Laser Radiometry. 40 High-Speed Measurements. 42 Fiber Sources and Applications . 44 Quantum Information and Terahertz Technology . 46 Nanostructure Fabrication and Metrology . 48 Semiconductor Growth and Devices. 50 Optical Materials Metrology . 52 Quantum Electrical Metrology Division . 55 Quantum Voltage System Development and Dissemination . 56 Metrology of the Ohm . 58 Quantum Conductance/Graphene-Based Quantum Metrology . 60 AC-DC Difference . 62 Farad and Impedance Metrology . 64 Electronic Kilogram . 66 Electric Power Metrology and the Smart Grid . 68 Quantum Sensors. 70 Quantum Information and Measurements . 72 Quantum Magnetic Sensors and Materials. 74 Electromagnetics Division. 77 This document describes Advanced High Frequency Devices . 78 the technical programs of the Advanced Materials Metrology. 80 Fundamental Guided-Wave Metrology . 82 laboratory. Antenna Metrology. 84 Field Parameter Metrology .
    [Show full text]