DOCSLIB.ORG

Aerospace: the Journey of Flight

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Aerospace: the Journey of Flight TEACHER’S GUIDE For AEROSPACE: THE JOURNEY OF FLIGHT March 2008 This document was prepared by Civil Air Patrol. Contents Preface iv National Standards 1 Part One: The Rich History of Air Power Chapter 1 – Introduction to Air Power 10 Chapter 2 – The Adolescence of Air Power: 1904-1919 15 Chapter 3 – The Golden Age: 1919-1939 21 Chapter 4 – Air Power Goes to War 27 Chapter 5 – Aviation: From the Cold War to Desert Storm 35 Chapter 6 – Advances in Aeronautics 45 Part Two: Principles of Flight and Navigation Chapter 7 – Basic Aeronautics and Aerodynamics 48 Chapter 8 – Aircraft in Motion 52 Chapter 9 – Flight Navigation 58 Part Three: The Aerospace Community Chapter 10 – The Airport 63 Chapter 11 – Air Carriers 65 Chapter 12 – General Aviation 68 Chapter 13 – Business and Commercial Aviation 71 Chapter 14 – Military Aircraft 75 Chapter 15 – Helicopters, STOL, VTOL and UAVs 79 Chapter 16 – Aerospace Organizations 84 Chapter 17 – Aerospace Careers and Training 88 Part Four: Air Environment Chapter 18 – The Atmosphere 92 Chapter 19 – Weather Elements 98 Chapter 20 – Aviation Weather 102 Part Five: Rockets Chapter 21 – Rocket Fundamentals 106 Chapter 22 – Chemical Propulsion 110 Chapter 23 – Orbits and Trajectories 114 Part Six: Space Chapter 24 – Space Environment 118 Chapter 25 – Our Solar System 123 Chapter 26 – Unmanned Space Exploration 129 Chapter 27 – Manned Spacecraft 137 ii Multiple Choice Sample Test Bank Part One: The Rich History of Air Power Chapter 1 – Introduction to Air Power 13 Chapter 2 – The Adolescence of Air Power: 1904-1919 18 Chapter 3 – The Golden Age: 1919-1939 25 Chapter 4 – Air Power Goes to War 32 Chapter 5 – Aviation: From the Cold War to Desert Storm 43 Chapter 6 – Advances in Aeronautics 47 Part Two: Principles of Flight and Navigation Chapter 7 – Basic Aeronautics and Aerodynamics 50 Chapter 8 – Aircraft in Motion 56 Chapter 9 – Flight Navigation 61 Part Three: The Aerospace Community Chapter 10 – The Airport 64 Chapter 11 – Air Carriers 67 Chapter 12 – General Aviation 69 Chapter 13 – Business and Commercial Aviation 73 Chapter 14 – Military Aircraft 78 Chapter 15 – Helicopters, STOL, VTOL and UAVs 81 Chapter 16 – Aerospace Organizations 85 Chapter 17 – Aerospace Careers and Training 89 Part Four: Air Environment Chapter 18 – The Atmosphere 95 Chapter 19 – Weather Elements 99 Chapter 20 – Aviation Weather 103 Part Five: Rockets Chapter 21 – Rocket Fundamentals 107 Chapter 22 – Chemical Propulsion 111 Chapter 23 – Orbits and Trajectories 115 Part Six: Space Chapter 24 – Space Environment 120 Chapter 25 – Our Solar System 126 Chapter 26 – Unmanned Space Exploration 132 Chapter 27 – Manned Spacecraft 137 iii Preface This guide was designed to help teachers use Aerospace: The Journey of Flight in their classrooms. It consists of detailed lesson plans for each chapter. The lesson plans include presentation steps, major points and supporting information. Each chapter also includes several objectives with descriptive verbs that should be easily verifiable and measurable. Additionally, this guide contains a sample test for each chapter. The sample tests present multiple choice and true/false questions that could be used on a test. The sample tests are located at the end of each chapter. Finally, this teacher’s guide includes national standards. These are academic content standards that describe what every student should know and be able to do in the core academic areas (e.g., mathematics, science, English language arts, and social studies). These standards are criteria for judging quality and are important resources for providing a framework for curriculum design as well as criteria for school accountability. iv National Standards Aerospace: The Journey of Flight Part One: The Rich History of Air Power (Chapters 1-6) Science Standards Mathematics English Social Technology Standards Language Studies Standards Arts Standards Standards Physical Science: 1. Number and 1. Reading for 2. Time, 3. • Motions and Operations Standard: Perspective Continuity, and Understanding Forces • Understanding Change of the numbers, relationships ways of among representing technologies numbers, and and the number connections systems. between technology and other fields of study. Science and 9. Connections 2. 6. Power, 4. Technology: Standard: Understanding Authority, and Understanding • Abilities of • Recognize the Human Governance of the cultural, technological and apply Experience social, design mathematics economic, and • Understandings in contexts political effects about science outside of of technology. and technology mathematics. Unifying Concepts and 3. Evaluation 8. Science, 6. Processes: Strategies Technology, Understanding • Evidence, and Society of the role of models, and society in the explanations development • Form and and use of function technology. 6. Applying 9. Global 7. Knowledge Connections Understanding of the influence of technology on history. 12. Applying Language Skills 1 Aerospace: The Journey of Flight Part Two: Principles of Flight and Navigation (Chapters 7-9) Science Standards Mathematics English Social Technology Standards Language Studies Standards Arts Standards Standard s Physical Science: 1. Number and 3. 8. Science, 1. • Structure and Operations Standard: Evaluation Technology, Understanding of properties of • Compute Strategies and Society the characteristics matter fluently and and scope of • Motions and make technology. forces reasonable • Conservation of estimates. energy Earth and Space Science: 3. Geometry Standard: 7. Applying 3. Understanding • Energy in the • Specify Knowledge of the earth system locations and relationships describe among spatial technologies and relationships the connections using between coordinate technology and geometry and other fields of other study. representations system. Science and Technology: 4. Measurement 12. 6. Understanding • Abilities of Standard: Applying of the role of technological • Understand Language society in the design measurable Skills development and • Understandings attributes of use of about science and objects and the technology. technology units, systems, and processes of measurement Science in Personal and 5. Data Analysis and 8. Understanding Social Perspectives: Probability Standard: of the attributes • Science and • Select and use of design. technology in appropriate local, national, statistical and global methods to challenges analyze data. • Develop and evaluate inferences and predictions that are based on data. 2 9. Understanding of engineering design. 10. Understanding of the role of troubleshooting, research and development, invention and innovation, and experimentation in problem solving. 3 Aerospace: The Journey of Flight Part Three: The Aerospace Community (Chapters 10-17) Science Standards Mathematics English Social Technology Standards Language Studies Standards Arts Standards Standards Physical Science: 1. Number and 1. Reading for 3. People, 1. • Motions and Operations Standard: Perspective Places, and Understanding of forces • Understanding Environments the numbers, characteristics ways of and scope of representing technology. numbers, relationships among numbers, and number systems. Science and 5. Data Analysis and 3. Evaluation 5. Individuals, 3. Technology: Probability Standard: Strategies Groups, and Understanding of • Abilities of • Develop and Institutions the relationships technological evaluate among design inferences and technologies and • Understandings predictions the connections about science that are based between and technology on data. technology and other fields of study. Science in Personal and 4. Social Perspectives: Understanding of • Environmental the cultural, quality social, economic, • Natural and and political human-induced effects of hazards technology. • Science and technology in local, national and global challenges History and Nature of 10. Civic 5. Science: Ideals and Understanding of • Science as a Practices the effects of human technology on endeavor the environment. • Nature of scientific knowledge • Historical perspectives 4 6. Understanding of the role of society in the development and use of technology. 8. Understanding of the attributes of design. 10. Understanding of the role of troubleshooting, research and development, invention and innovation, and experimentation in problem solving. 5 Aerospace: The Journey of Flight Part Four: Air Environment (Chapters 18-20) Science Standards Mathematics English Social Technology Standards Language Studies Standards Arts Standards Standard s Physical Science: 4. Measurement Standards: 3. 3. People, 3. • Structure and • Understand Evaluation Places, and Understanding properties of measurable Strategies Environments of the matter attributes of relationships • Conservation objects and the among of energy and units, systems, and technologies the increase in processes of and the disorder measurement. connections • Interactions of • Apply appropriate between energy and techniques, tools, technology and matter and formulas to other fields of determine study. measurements. Earth and Space 6. Problem Solving 12. Science: Standard: Applying • Energy in the • Solve problems Language earth system that arise in Skills mathematics and in other contexts. Science in Personal 9. Connections Standard: and Social • Recognize and Perspectives: apply mathematics • Natural and in contexts outside human- of mathematics. induced hazards • Science and technology in local, national, and global challenges History and Nature of Science: • Nature of scientific knowledge
Load more

Recommended publications
  • 32 ROMANIAN CONTRIBUTIONS in AERONAUTICS Adrian NECULAE
    ROMANIAN CONTRIBUTIONS IN AERONAUTICS Adrian NECULAE West University of Timisoara, ROMANIA A short history of the flight From the earliest days, humans have dreamed of flying and have attempted to achieve it. The dream of flight was inspired by the observation of the birds even from the early times and was illustrated in myths, fiction (fantasy, science fiction and comic book characters) and art. Greek, Roman or Indian mythology have examples of gods who were gifted with flight. Daedalus and Icarus flew through the air, and Icarus died when he flew too close to the sun. Daedalus and Icarus (Greek) Pushpaka Vimana of the Ramayana (Indian) Religions relate stories of chariots that fly through the air and winged angels that join humans with the heavens. Flying creatures that were half human and half beast appear in legends. Birds and fantastic winged creatures pulled boats and other vehicles through the air. Let’s see some relevant examples: 32 From the top left corner: Angel, Pegasus, Dragons, Superman, Santa Claus, Dumbo. My talk is about progress in science, and more specific, about progresses in human fight against gravity. An illustration in art of the idea of what it means the progress in flight is given in the picture below, painted at the end of the 19th Century: The human dream of flight: Utopian flying machines from the 18th Century. The image and the title of this art work express, maybe better than other words, the idea of progress in flight, especially in modern and present history: things that seemed to be pure utopia a century
    [Show full text]
  • Junkers G 38 Aerophilatelie
    Katalog und Handbuch zu den Flügen der JUNKERS G 38 D-2000 und D-2500 Hubertus Hentschel Siemensstraße 10 40670 Meerbusch Tel. 02159 - 3084 FAX 02159 – 51808 eMail: [email protected] Die Junkers Ganzmetallflugzeuge G 38 Junkers G 38 D-2000 ( AZUR ) Werknummer 3301 G 38 di 06.11.29 JUNKERS D-2000 07.05.31 LUFT HANSA D-2000 06.07.33 DEUTSCHLAND D-2000 20.03.34 DEUTSCHLAND D-AZUR Besatzung Flugkapitän : Wilhelm Zimmermann * 24.02.1897 + 29.03.1956 2. Flugzeugf. : Otto Brauer * 16.10.1897 + 16.04.1976 : Paul Dierberg : Hans Etzold Steward : Arthur Howe Konstrukteure : Hugo Junkers * 03.02.1859 + 03.02.1935 : Ernst Zindel * 21.03.1897 + 10.10.1978 Passagiere : 9 Sitzplätze, 4 Liegeplätze : nach dem Umbau 30 Sitzplätze Junkers G 38 D-2500 ( APIS ) Werknummer 3302 G 38 ce, G 38 ci, G 38 fi 14.06.32 LUFT-HANSA D-2500 00.00.33 HINDENBURG D-2500 29.04.33 GENERALFELDMARSCHALL VON HINDENBURG D-2500 20.03.34 GENERALFELDMARSCHALL VON HINDENBURG D-APIS 00.04.40 GF-GG Besatzung Flugkapitän : Otto Brauer ( später Major ) 2. Flugzeugf. : Hans Etzold Funker : Heinrich Wiechers Maschinisten : Otto Rosinski, Willi Melzer, Heinrich Lauerwald Steward : Arthur Howe Konstrukteure : Hugo Junkers, Ernst Zindel Passagiere : 34 Fluggäste Das Gästebuch der JUNKERS G 38 ( D - 2500 ) Am 29.04.1933 wurde die JUNKERS G 38 ( D - 2500 ) auf den Namen Generalfeldmarschall von Hindenburg getauft. Der Name Hindenburg hatte bereits vorher auf dem Rumpf gestanden. Die Taufe nahm Reichsluftfahrtminister Hermann Göring im Beisein des greisen Reichspräsidenten Paul von Hindenburg vor.
    [Show full text]
  • Aerospace Dimensions Leader's Guide
    Leader Guide www.capmembers.com/ae Leader Guide for Aerospace Dimensions 2011 Published by National Headquarters Civil Air Patrol Aerospace Education Maxwell AFB, Alabama 3 LEADER GUIDES for AEROSPACE DIMENSIONS INTRODUCTION A Leader Guide has been provided for every lesson in each of the Aerospace Dimensions’ modules. These guides suggest possible ways of presenting the aerospace material and are for the leader’s use. Whether you are a classroom teacher or an Aerospace Education Officer leading the CAP squadron, how you use these guides is up to you. You may know of different and better methods for presenting the Aerospace Dimensions’ lessons, so please don’t hesitate to teach the lesson in a manner that works best for you. However, please consider covering the lesson outcomes since they represent important knowledge we would like the students and cadets to possess after they have finished the lesson. Aerospace Dimensions encourages hands-on participation, and we have included several hands-on activities with each of the modules. We hope you will consider allowing your students or cadets to participate in some of these educational activities. These activities will reinforce your lessons and help you accomplish your lesson out- comes. Additionally, the activities are fun and will encourage teamwork and participation among the students and cadets. Many of the hands-on activities are inexpensive to use and the materials are easy to acquire. The length of time needed to perform the activities varies from 15 minutes to 60 minutes or more. Depending on how much time you have for an activity, you should be able to find an activity that fits your schedule.
    [Show full text]
  • Aerospace Engine Data
    AEROSPACE ENGINE DATA Data for some concrete aerospace engines and their craft ................................................................................. 1 Data on rocket-engine types and comparison with large turbofans ................................................................... 1 Data on some large airliner engines ................................................................................................................... 2 Data on other aircraft engines and manufacturers .......................................................................................... 3 In this Appendix common to Aircraft propulsion and Space propulsion, data for thrust, weight, and specific fuel consumption, are presented for some different types of engines (Table 1), with some values of specific impulse and exit speed (Table 2), a plot of Mach number and specific impulse characteristic of different engine types (Fig. 1), and detailed characteristics of some modern turbofan engines, used in large airplanes (Table 3). DATA FOR SOME CONCRETE AEROSPACE ENGINES AND THEIR CRAFT Table 1. Thrust to weight ratio (F/W), for engines and their crafts, at take-off*, specific fuel consumption (TSFC), and initial and final mass of craft (intermediate values appear in [kN] when forces, and in tonnes [t] when masses). Engine Engine TSFC Whole craft Whole craft Whole craft mass, type thrust/weight (g/s)/kN type thrust/weight mini/mfin Trent 900 350/63=5.5 15.5 A380 4×350/5600=0.25 560/330=1.8 cruise 90/63=1.4 cruise 4×90/5000=0.1 CFM56-5A 110/23=4.8 16
    [Show full text]
  • Global Military Helicopters 2015-16 Market Report Contents
    GLOBAL MILITARY HELICOPTERS 2015-16 MARKET REPORT CONTENTS MARKET OVERVIEW 2 MILITARY HELICOPTER KEY REQUIREMENTS 4 EUROPE 5 NORTH AMERICA 10 LATIN AMERICA & THE CARIBBEAN 12 AFRICA 15 ASIA-PACIFIC 16 MIDDLE EAST 21 WORLD MILITARY HELICOPTER HOLDINGS 23 EUROPE 24 NORTH AMERICA 34 LATIN AMERICA & THE CARIBBEAN 36 AFRICA 43 ASIA-PACIFIC 49 MIDDLE EAST 59 EVENT INFORMATION 65 Please note that all information herein is subject to change. Defence IQ endeavours to ensure accuracy wherever possible, but errors are often unavoidable. We encourage readers to contact us if they note any need for amendments or updates. We accept no responsibility for the use or application of this information. We suggest that readers contact the specific government and military programme offices if seeking to confirm the reliability of any data. 1 MARKET OVERVIEW Broadly speaking, the global helicopter market is currently facing a two- pronged assault. The military helicopter segment has been impacted significantly by continued defense budgetary pressures across most traditional markets, and a recent slide in global crude oil prices has impacted the demand for new civil helicopters as well as the level of activity for existing fleets engaged in the offshore oil & gas exploration sector. This situation has impacted industry OEMs significantly, many of which had been working towards strengthening the civil helicopter segment to partially offset the impact of budgetary cuts on the military segment. However, the medium- to long-term view of the market is promising given the presence of strong fundamentals and persistent, sustainable growth drivers. The market for military helicopters in particular is set to cross a technological threshold in the form of next-generation compound helicopters and tilt rotorcraft.
    [Show full text]
  • Wildland Fire Incident Management Field Guide
    A publication of the National Wildfire Coordinating Group Wildland Fire Incident Management Field Guide PMS 210 April 2013 Wildland Fire Incident Management Field Guide April 2013 PMS 210 Sponsored for NWCG publication by the NWCG Operations and Workforce Development Committee. Comments regarding the content of this product should be directed to the Operations and Workforce Development Committee, contact and other information about this committee is located on the NWCG Web site at http://www.nwcg.gov. Questions and comments may also be emailed to [email protected]. This product is available electronically from the NWCG Web site at http://www.nwcg.gov. Previous editions: this product replaces PMS 410-1, Fireline Handbook, NWCG Handbook 3, March 2004. The National Wildfire Coordinating Group (NWCG) has approved the contents of this product for the guidance of its member agencies and is not responsible for the interpretation or use of this information by anyone else. NWCG’s intent is to specifically identify all copyrighted content used in NWCG products. All other NWCG information is in the public domain. Use of public domain information, including copying, is permitted. Use of NWCG information within another document is permitted, if NWCG information is accurately credited to the NWCG. The NWCG logo may not be used except on NWCG-authorized information. “National Wildfire Coordinating Group,” “NWCG,” and the NWCG logo are trademarks of the National Wildfire Coordinating Group. The use of trade, firm, or corporation names or trademarks in this product is for the information and convenience of the reader and does not constitute an endorsement by the National Wildfire Coordinating Group or its member agencies of any product or service to the exclusion of others that may be suitable.
    [Show full text]
  • Building Cold War Warriors: Socialization of the Final Cold War Generation
    BUILDING COLD WAR WARRIORS: SOCIALIZATION OF THE FINAL COLD WAR GENERATION Steven Robert Bellavia A Dissertation Submitted to the Graduate College of Bowling Green State University in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY May 2018 Committee: Andrew M. Schocket, Advisor Karen B. Guzzo Graduate Faculty Representative Benjamin P. Greene Rebecca J. Mancuso © 2018 Steven Robert Bellavia All Rights Reserved iii ABSTRACT Andrew Schocket, Advisor This dissertation examines the experiences of the final Cold War generation. I define this cohort as a subset of Generation X born between 1965 and 1971. The primary focus of this dissertation is to study the ways this cohort interacted with the three messages found embedded within the Cold War us vs. them binary. These messages included an emphasis on American exceptionalism, a manufactured and heightened fear of World War III, as well as the othering of the Soviet Union and its people. I begin the dissertation in the 1970s, - during the period of détente- where I examine the cohort’s experiences in elementary school. There they learned who was important within the American mythos and the rituals associated with being an American. This is followed by an examination of 1976’s bicentennial celebration, which focuses on not only the planning for the celebration but also specific events designed to fulfill the two prime directives of the celebration. As the 1980s came around not only did the Cold War change but also the cohort entered high school. Within this stage of this cohorts education, where I focus on the textbooks used by the cohort and the ways these textbooks reinforced notions of patriotism and being an American citizen.
    [Show full text]
  • Spacecraft American Aerospace Controls
    Spacecraft For More Than 50 Years, Our Experience Is Your Assurance™ AAC Manufactures high-reliability voltage and current sensors for: Satellites UAVs Commercial Aircraft Missiles Underwater Vehicles Military Aircraft Launch Systems Armored Vehicles Ships Helicopters Industrial Equipment Rail AAC is a Woman-Owned Business and all parts are manufactured at AAC’s Farmingdale, NY location. American Aerospace Controls 570 Smith Street, Farmingdale NY 11735 Phone: +1 (631) 694-5100 – Fax: +1 (631) 694-6739 http://a-a-c.com ©American Aerospace Controls 10-2016 Aircraft-UAVs Rail AAC Quality and Engineering Industrial Defense For More Than 50 Years, Our Experience is Your Assurance™ AAC Engineering and Quality Depart- Since 1965, American Aerospace Controls has been manufacturing high reliability ments are here to work with you on the AC & DC current, voltage and frequency sensors, transducers and detectors. With design and qualification of your parts. an emphasis on engineering solutions and customer support, AAC has developed Our vast experience in space flight app- long-term relationships with some of the largest aerospace, defense, transit and industrial companies around the globe. lications allows us to offer insight into the design and requirements of each unique Space Application. AAC main- AAC in Space tains the highest standards in Quality and Production. AAC sensors have been used on numerous manned and unmanned spacecraft, satellite, rocket and Unmanned Aerial Vehicle (UAV) programs. AAC has been involved with space flight applications since the mid-1960s. AAC’s extensive From the Mercury Program in the 1960’s to today’s international commercial and knowledge and decades of experience in designing and manufacturing defense satellite systems, AAC engineers have helped design current and voltage transducers and detectors capable of providing high reliability in harsh remote detectors and transducers that are the best available.
    [Show full text]
  • Hindenburg: Last of The1 2 Gtaihi
    www.PDHcenter.com www.PDHonline.org Table of Contents Slide/s Part Description 1N/ATitle 2 N/A Table of Contents 3~96 1 Exceeding the Grasp 97~184 2 Biggest Birds That Ever Flew 185~281 3 Triumph and Tragedy 282~354 4 Made in America 355~444 5 The Future is Now 445~541 6 LZ-129 542~594 7 Flight Operations 595~646 8 Magic Carpet Ride 647~759 9 Oh, The Humanity! 760~800 10 Back to the Future Hindenburg: Last of the1 2 GtAihi Part 1 “Ah, but a man’s reach should exceed his grasp, or what’s a heaven for?”for? Robert Browning, Poet Exceeding the Grasp 3 4 “...as by certain mechanical art and power to fly; The Dreams of Inventors so nicely was it balanced by weights and put in motion by hidden and enclosed air” Archytas of Tarentura, 400 B.C. 5 6 © J.M. Syken 1 www.PDHcenter.com www.PDHonline.org “…Then we are told of a monk who attempted a flight with wings from the top of a tower in Spain. He broke his legs, and wasafterwardburnedasasorcerer. Another similar trial was made from St. Mark’s steeple in Venice; another in Nuremberg;andsoonԝ - legs or arms were usually broken, occasionally a neck. In the sixteenth century we read of a certain Italian who went to the court of James IV of Scotland, and attempted to fly from the walls of Sterling Castle to France. His thig h was bkbroken; btbut,asareasonfor the failure, he asserted that some of the feathers used in constructing his wings “…Many other trials have there been of the same character.
    [Show full text]
  • Warfare in a Fragile World: Military Impact on the Human Environment
    Recent Slprt•• books World Armaments and Disarmament: SIPRI Yearbook 1979 World Armaments and Disarmament: SIPRI Yearbooks 1968-1979, Cumulative Index Nuclear Energy and Nuclear Weapon Proliferation Other related •• 8lprt books Ecological Consequences of the Second Ihdochina War Weapons of Mass Destruction and the Environment Publish~d on behalf of SIPRI by Taylor & Francis Ltd 10-14 Macklin Street London WC2B 5NF Distributed in the USA by Crane, Russak & Company Inc 3 East 44th Street New York NY 10017 USA and in Scandinavia by Almqvist & WikseH International PO Box 62 S-101 20 Stockholm Sweden For a complete list of SIPRI publications write to SIPRI Sveavagen 166 , S-113 46 Stockholm Sweden Stoekholol International Peace Research Institute Warfare in a Fragile World Military Impact onthe Human Environment Stockholm International Peace Research Institute SIPRI is an independent institute for research into problems of peace and conflict, especially those of disarmament and arms regulation. It was established in 1966 to commemorate Sweden's 150 years of unbroken peace. The Institute is financed by the Swedish Parliament. The staff, the Governing Board and the Scientific Council are international. As a consultative body, the Scientific Council is not responsible for the views expressed in the publications of the Institute. Governing Board Dr Rolf Bjornerstedt, Chairman (Sweden) Professor Robert Neild, Vice-Chairman (United Kingdom) Mr Tim Greve (Norway) Academician Ivan M£ilek (Czechoslovakia) Professor Leo Mates (Yugoslavia) Professor
    [Show full text]
  • Aerospace Manufacturing a Growth Leader in Georgia
    Aerospace Manufacturing A Growth Leader in Georgia In this study: 9. Research Universities 10. GTRI and GTMI 1. Industry Snapshot 11. High-Tech Talent 3. A Top Growth Leader 12. Centers of Innovation 4. Industry Mix 13. World-Class Training Programs 6. Industry Wages and Occupational 15. Strong Partnerships and Ready Workforce Employment 16. Transportation Infrastructure 7. Pro-Business State 17. Powering Your Manufacturing Facility Community and Economic Development 8. Unionization 18. Aerospace Companies Aerospace Manufacturing A Growth Leader in Georgia Aerospace is defined as Aerospace Products and Parts Manufacturing as well as Other Support Activities for Air Transportation. Aerospace Georgia is the ideal home for aerospace include Pratt & Whitney’s expansion in companies with ¨¦§75 ¨¦§575 25+ employees companies. With the world’s most traveled Columbus in both 2016 and 2017, Meggitt «¬400 ¨¦§85 ¨¦§985 airport, eight regional airports, prominent Polymers & Composites’ expansion in military bases and accessibility to the Rockmart and MSB Group’s location in ¨¦§20 ¨¦§20 country’s fastest-growing major port, Savannah. For a complete list of new major ¨¦§85 Georgia’s aerospace industry serves a locations and expansions, see page 2. ¨¦§185 global marketplace. Georgia is also home to a highly-skilled workforce and world- ¨¦§16 Why Georgia for Aerospace? class technical expertise geared toward promoting the success of the aerospace • Highly skilled workers ¨¦§75 ¨¦§95 industry. Georgia’s business climate is • World-class technical expertise consistently ranked as one of the best • Renowned workforce training program in the country, with a business-friendly tax code and incentives that encourage • Increasing number of defense manufacturing growth for existing and personnel newly arriving companies.
    [Show full text]
  • Manufacturing Techniques of a Hybrid Airship Prototype
    UNIVERSIDADE DA BEIRA INTERIOR Engenharia Manufacturing Techniques of a Hybrid Airship Prototype Sara Emília Cruz Claro Dissertação para obtenção do Grau de Mestre em Engenharia Aeronáutica (Ciclo de estudos integrado) Orientador: Prof. Doutor Jorge Miguel Reis Silva, PhD Co-orientador: Prof. Doutor Pedro Vieira Gamboa, PhD Covilhã, outubro de 2015 ii AVISO A presente dissertação foi realizada no âmbito de um projeto de investigação desenvolvido em colaboração entre o Instituto Superior Técnico e a Universidade da Beira Interior e designado genericamente por URBLOG - Dirigível para Logística Urbana. Este projeto produziu novos conceitos aplicáveis a dirigíveis, os quais foram submetidos a processo de proteção de invenção através de um pedido de registo de patente. A equipa de inventores é constituída pelos seguintes elementos: Rosário Macário, Instituto Superior Técnico; Vasco Reis, Instituto Superior Técnico; Jorge Silva, Universidade da Beira Interior; Pedro Gamboa, Universidade da Beira Interior; João Neves, Universidade da Beira Interior. As partes da presente dissertação relevantes para efeitos do processo de proteção de invenção estão devidamente assinaladas através de chamadas de pé de página. As demais partes são da autoria do candidato, as quais foram discutidas e trabalhadas com os orientadores e o grupo de investigadores e inventores supracitados. Assim, o candidato não poderá posteriormente reclamar individualmente a autoria de qualquer das partes. Covilhã e UBI, 1 de Outubro de 2015 _______________________________ (Sara Emília Cruz Claro) iii iv Dedicator I want to dedicate this work to my family who always supported me. To my parents, for all the love, patience and strength that gave me during these five years. To my brother who never stopped believing in me, and has always been my support and my mentor.
    [Show full text]