DOCSLIB.ORG

Plumbing Catalog

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Plumbing Catalog • PUMP PLIERS • WRENCHES • KNIVES • CUTTERS • JAB SAW • SCREWDRIVERS • NUT DRIVERS • GAS LEAK DETECTOR • TESTERS • LEVELS • TAPE MEASURES • FLASHLIGHTS • TOOL STORAGE • JOBSITE ACCESSORIES Klein Tools was founded in 1857 by an industrious German immigrant, Mathias Klein, who began in the hand tool business when a broken side-cutting pliers PLUMBING was brought to his forge shop by a telegraph lineman. Mathias repaired the pliers by forging and finishing a new half for the tool and riveting it to the old half. Soon the lineman returned because the other original half of the pliers had broken and needed replacement. Mathias forged and finished the second half of the pliers and riveted it to the other replacement half – creating the first complete Klein pliers. To this day, Klein Tools is proudly owned and managed by the Klein family. Over 160 years of hard work and dedication has earned Klein the reputation of supplying only the finest quality products for users of professional hand tools, Test and Measurement and occupational protective equipment. PLUMBING TABLE OF CONTENTS Wrenches ......................................2 Pump Pliers ....................................3 Hacksaw .......................................3 Duct Knife ......................................3 Utility Knife .....................................4 Folding Jab Saw .................................4 Tube Cutters ....................................4 PVC Cutters.....................................5 Screwdrivers....................................5 Nut Drivers .....................................6 Magnetizer .....................................7 Combustible Gas Leak Detector .....................7 Carbon Monoxide (CO) Meter .......................7 Bluetooth Speaker................................8 Tough Box 9 Qt Cooler ............................8 Lighted Torpedo Level.............................8 25’ Magnetic Tape Measure, Double Hook .............8 Flashlight w ith Worklight . 9 LED Headlamp Flashlight with Strap .................9 Bags, Backpacks & Totes ..........................9 1 REVERSIBLE JAW 2-IN-1 ADJUSTABLE WRENCH/PIPE WRENCH, 10" Converts from adjustable wrench to pipe wrench by simply reversing the removable jaw. • Extra wide 1-1/2" (38mm) jaw opening in both configurations PLUMBING • Easily change from an adjustable wrench to a pipe wrench D86930 • Pipe wrench side of jaw grips pipes and round fasteners with self-gripping angled teeth • Standard and metric markings for fast and precise adjustment Cat. No. UPC Description D86930 69074-7 Reversible Jaw/Adjustable Pipe Wrench, 10" Reversible jaw has teeth and an obtuse angle to work as a pipe wrench SLIM JAW ADJUSTABLE WRENCHES — 4", 6" & 8" Designed for tight wrench-over-wrench applications with 40% Slimmer Jaws Ideal for tight space wrench-over-wrench applications such D86936 as gas lines, pumps, and motors. Unique design minimizes protruding jaw shank for greater capacity and range of motion in confined areas. Standard and metric permanent markings for fast and precise adjustment. Manufactured for D86934 strength and durability. • Slim Jaw is 40% thinner and meets D86932 ASME 107.00-2010 testing for adjustable wrenches • Great for hard to reach applications – motors, pumps, gas lines, expansion valves • Extra-wide jaw with standard and metric markings Cat. No. UPC Description D86932 69075-4 Slim Jaw Adjustable Wrench, 4" D86934 69076-1 Slim-Jaw Adjustable Wrench, 6" D86936 69084-6 Slim-Jaw Adjustable Wrench, 8" ADJUSTABLE WRENCH EXTRA CAPACITY • Extra capacity allows use of a smaller size wrench to handle bigger jobs, especially in confined spaces • Forged heat-treated alloy steel for maximum strength and light weight • Precision-machined jaws are individually chosen and assembled by hand for smooth operation • Heat-treated for long life D507-8 • Rail is ground for precision fit; knurl turns smoothly for easy operation • Contoured handles for comfortable use • High-polish chrome finish; chrome-plated for rust resistance Cat. No. UPC Description D507-6 67525-6 Adjustable Wrench Extra Capacity, 6-1/2" D507-8 67528-7 Adjustable Wrench Extra Capacity, 8-1/4" 2 10" QUICK-ADJUST KLAW™ PUMP PLIERS PLUMBING • Unique jaw design provides multiple points of contact for maximum torque • Push button and quick ratchet feature allows for D504-10B fast and easy adjustment to any position • Compact, narrow design for easy work in small or hard to reach spaces • Gripping surface with specially hardened teeth for reduced wear and positive grip • Extended grips for added comfort Cat. No. UPC Description Quick Adjust™ style with D504-10B 73047-4 10" Quick-Adjust Klaw™ Pump Pliers push button feature PUMP PLIERS • Quick-Adjust Rivet allows one-handed fast, easy adjustment of plier jaws • Wide range of versatile jaw positions • 7/8" (22 mm) maximum parallel jaw opening for a range of applications (D502-6) • 1-3/4" (44 mm) maximum parallel jaw opening for a range of applications (D502-10) • Smoothly adjusts between machined tongue and D502-10 groove jaw positions • Secure tongue and groove design for non-slip grip — even with heavy pressure • Robust teeth for sure gripping action • Induction hardened jaws for long life Cat. No. UPC Description D502-10 73010-8 10" (254 mm) Pump Pliers D502-6 73002-3 6" (152 mm) Pump Pliers HIGH TENSION HACKSAW • Adjustable blade tension up to 30,000 PSI for fast, precise cuts • Soft touch grips; Convenient blade storage in handle • Alternative 45° mounting for flush cutting • Front mount for reciprocating saw blades • Includes 12" (305 mm) x 24 TPI bi-metal hack saw blade and 6" (152 mm) x 24 TPI bi-metal reciprocating saw blade Cat. No. UPC Blade Length Overall Length Weight 702-12 702-12 70212-9 12” (304.8mm) 16-1/4” (412.8 mm) 1.5 lb. (0.7 kg) DUCT KNIFE Double edged knife with regular and serrated blade. Cuts duct board and flexible duct. Includes puncture resistant nylon sheath with belt loop. Cat. No. UPC Description DK06 DK06 76101-0 6" Duct Knife Check local law on legality of selling, possessing,or carrying this knife. 3 FOLDING JAB SAW No more torn tool bags! The fast cutting carbon steel blade is as sturdy as a fixed blade saw, but folds smartly PLUMBING into the comfort-grip handle. The lockback mechanism secures the blade at a full 180 degrees and also at a 125 degrees. Cat. No. UPC Description 31737 31737-8 Folding Jab Saw 31737 FOLDING UTILITY KNIFE • Push button to easily open and close • Contains a wire stripping notch • High quality, triple ground blades stay sharp longer • Rubber grips on handle for improved control and comfort • The bright orange handle color makes this knife easy to find in a tool bag or pouch 44131 • Heavy-duty durable construction Cat. No. UPC Description 44131 44025-0 Folding Utility Knife WARNING: Blades are intended for cutting only, and should be handled and disposed of with care. Bending the blade can cause it to break, possibly resulting in bodily injury. MINI TUBE CUTTER For 1/8" to 5/8" (3mm – 16 mm) copper and aluminum tubing. Requires only 1-3/8" (35mm) swing radius. Not designed for cutting stainless steel or hard tempered tubing. 88910 Cat. No. UPC Description 88910 69077-8 Mini Tube Cutter PVC & MULTILAYER TUBING CUTTER Cuts 1" (25mm) O.D. multilayer plastic tubing and up to 3/4" (19 mm) schedule 40 PVC pipe. Cat. No. UPC Description 88912 69078-5 PVC and Multilayer Tubing Cutter 88192 PROFESSIONAL TUBE CUTTER Accurate 4-roller system; no spiraling. Professional reaming tool for stainless steel tubing. Extra cutting wheel included in the handle. Cat. No. UPC Description 88904 88904 88904-2 Professional Tube Cutter 4 RATCHETING PVC CUTTER PLUMBING • Ratchet action allows easy, one-hand cutting. • Quick one-handed blade release –no tools required. • Cuts up to 2" PVC. 50034 Cat. No. UPC Description 50034 50034-3 Large Capacity Ratcheting PVC Cutter 3/4" PVC CUTTER • Cuts up to 3/4'' schedule 40 PVC • Steel construction for strength • Makes clean burr-free cuts in PVC and flexible pipe • Reversible blade doubles life • Cuts 1-3/8'' O.D. flexible plastic pipe • Handle latch keeps tool closed 50506SEN • Replacement blade available (Cat. No. 50549) Cat. No. UPC Description 50506SEN 50507-2 3/4" PVC Cutter Cushion-Grip Screwdrivers Meets or exceeds applicable ASME / ANSI specifications Tip-Ident® quickly identifies the type of screwdriver and Heat-treated, premium chrome- tip orientation plated shank for smooth feel and corrosion resistance Precision-machined tip for exact fit Integral flanges inside handle provide Cushion-Grip handle allows for solid, twist-resistant blade anchor greater torque and comfort SCREWDRIVERS 603-4 32500 Cat. No. UPC Description 32500 32500-7 11-in-1 Multi-Bit Screwdriver/Nut Driver 32561 32561 32561-8 Stubby Multi-Bit Screwdriver/Nut Driver, 1-1/4” shaft 600-1 601-6 85014-1 3/16" Cabinet Tip Screwdriver, 6" shank 600-4 85002-8 1/4" Screwdriver Heavy Duty Square, 4” Shank 601-6 600-1 85000-4 5/16" Cabinet Tip Screwdriver, 1-1/2" shank 603-4 85036-3 #2 Phillips Screwdriver, 4" Round Shank 600-4 602-7DD 32222-8 5/16" Keystone Demolition Driver, 7" Shank 602-7DD 5 SLIDE DRIVE NUT DRIVERS Unique, patented tip slides back and forth to switch from 1/4" to 5/16" hex sizes. A simple twist of the 65129 thumb nut locks in the tip setting. Magnet in hex keeps screw in place. PLUMBING Cat. No. UPC Description 65129 65129-8 Extended Reach 2-in-1 Hex Head Slide Drive™ Nut Driver, 6" 65131 65131-1 Stubby 2-in-1 Hex Head Slide Drive™ Nut Driver, 1-1/2" 65131 7-IN-1 NUT DRIVER Easy, one-handed driving plus seven sizes in one tool • Strong, rare earth magnets securely hold nuts and bolts (1/4", 5/16", 11/32", 3/8", 1/2") • Spring coil holds nuts and bolts in place without the use of magnets (7/16", 9/16") • Hollow shafts for driving nuts deep onto bolts or threaded rod (1/4", 5/16", 3/8", 7/16", 9/16") • Heavy-duty handle and shaft exceed the torque performance of regular nut drivers 32807MAG • Wrench-assist on handle for added torque on tough jobs • Color-coded bands for easy identification Cat.
Load more

Recommended publications
  • KNIPEX Mini Catalog
    KNIPEX Quality – Made in Germany Mini-Catalog The KNIPEX brand stands for reliability in every single tool. If you need a tool to get the job done the first time, every time, make sure to select KNIPEX. In this mini-catalog, you will find the most popular and highly sold tools designed to meet the various needs of professional tool users. With a limited lifetime warranty for every tool, you can’t go wrong in adding a quality tool like KNIPEX to your toolbox. www.knipex-tools.com KNIPEX Quality – Made in Germany Cobra® Water Pump Pliers 87 02 180 87 01 250 > Self-gripping jaw design won’t slip > Gripping surface with special hardened teeth (approx. 61 HRC) is wear resistant and grips any shaped object – round, square, hex or flat 87 01 560 > Self-locking on pipes and nuts means no slipping off the workpiece > Patented push-button mechanism means adjust Round Square Hex Flat once and it stays > Fine-adjustment provides an optimum adjustment to different size workpieces > Guard prevents finger and hand pinching > Thin head fits into tight spaces Maximum Adjustment KNIPEX Part # Description Capacity Positions Handle Style 87 00 100 4" Cobra Pliers 1" 11 embossed 87 01 125 5" Cobra Pliers 1 1/16" 13 plastic dipped 87 01 150 6" Cobra Pliers 1 1/4" 11 plastic dipped 87 01 180 7 1/4" Cobra Pliers 1 1/2" 18 plastic dipped 87 02 180 7 1/4" Cobra Pliers 1 1/2" 18 comfort grip 87 01 250 10" Cobra Pliers 2" 25 plastic dipped 87 02 250 10" Cobra Pliers 2" 25 comfort grip 87 21 250 10" Cobra QuickSet Pliers 2" 25 plastic dipped 87 28 250 US 10" Cobra Pliers 2" 24 1000V insulated 87 01 300 12" Cobra Pliers 2 3/4" 30 plastic dipped 87 02 300 12" Cobra Pliers 2 3/4" 30 comfort grip 87 21 300 12" Cobra QuickSet Pliers 2 3/4" 30 plastic dipped 87 01 400 US 16" Cobra Pliers 3 3/4" 27 plastic dipped 87 01 560 US 22" Cobra Pliers 4 3/4" 20 plastic dipped Alligator® Water Pump Pliers 88 01 180 88 02 180 88 08 250 US > Self-gripping jaw design won’t slip 88 01 300 > Gripping surface with special hardened teeth (approx.
    [Show full text]
  • HYTORC Tool Basics Description, Operation and Safety
    HYTORC Tool Basics Description, Operation and Safety November 10, 2017 BOSS Training Series Basic Operation and Safety Series Contents 1. Hydraulic Torque Tools 2. Pneumatic Torque Tools 3. Electric Torque Tools 5. Hydraulic Tensioners Hydraulic Torque Technology Pneumatic Torque Tool Overview Electric Torque Tool Overview Hydraulic Tensioner Technology Hydraulic Torque Tool Overview Pneumatic Tool Comparison Electric Tool Comparison Top Side Tensioners Hydraulic Tool Comparison JGUN SINGLE SPEED FLASH 2.0 Wind and Subsea Tensioners EDGE jGUN DUEL SPEED LITHIUM SERIES Gun Tensioner Pumps VERSA FRL LION GUN Tensioner Accessories MXT Digital jGUN XLCT L – Lithium Battery Gun T - Hydraulic Tensioning ICE J - jGUN Tool Operating Operating Procedures Operating Procedures AVANTI Procedures STEALTH DJ – Digital jGUN Operating HY-115/230 Procedures HY-Air 4. HYTORC Fasteners Vector 6. Safety HYTORC Washer Additional Hydraulic Pumps Bolting Safety Moment HYTORC Nut H - Hydraulic Torque Tool HW - HYTORC Washer Install Operating Procedures Procedure HN – HYTORC Nut Install Procedure 1. Hydraulic Torque Tools BOSS Training Series Basic Operation and Safety Series Hydraulic Torque Tool Technology PUSH – ADVANCE – CLICK – RELEASE – Tool Drive Turns 24 degrees PUSH Pushing the advance button on the remote PUSH switches a solenoid valve on the pump and directs hydraulic fluid pressure into the advance side of the tool cylinder. ADVANCE ADVANCE Piston in the tool cylinder advances to turn the ratchet 24 degrees/click. (some tool ratchets are different, the STEALTH turns 18 degrees/click) CLICK CLICK Ratchet locks in place against a pawl with a distinct clicking sound. RELEASE - RETRACT Releasing the advance button causes the RELEASE solenoid valve to direct pressure in the release port to retract the piston.
    [Show full text]
  • Spanners and Wrenches
    Spanne rs and Wrench es - the various types open spanners - ring spanners - adjustable - box spanner - socket allen keys - torque wrench - pipe wrench - basin spanner - tips Spanners come in all shapes and sizes, many being developed to deal with a specific job. By far the most important consideration when using a spanner is to ensure that it fits the nut perfectly. Too loose, and it will round the comers of the nut - and slip, often damaging the nut. Spanner and your hand. When purchasing spanners, select good quality tools. The best types are forged from carbon steel or chrome vanadium, if not abused, these will last a lifetime. Open ended - 'C' spanner The open ended spanner is the most common type, and may have a single or double end. The head has its jaws offset by about 15 degrees from the run of the shaft. This is so the spanner can be turned over to engage different flats of a nut when working in confined spaces. Another version, called an obstruction spanner, is designed for use in confined spaces. It has one head set at anything upto 90 degrees to the shaft, and the shaft may have a slight curve. Ring spanner As the name implies, the ring spanner usually has a completely enclosed head, and may have six or 12 flats. A 12 flat spanner engages upon the corners of the nut and can engage both hexagon and square bolts. A six flat spanner is normally shaped to fit against all 6 sides of hexagon nuts, this ensures a very tight fit and can allow considerable force to be applied.
    [Show full text]
  • New DEWALT® 20V MAX* 1/2" Mid-Range Impact Wrench
    Nov 01, 2017 12:35 EDT New DEWALT® 20V MAX* 1/2" Mid- Range Impact Wrench TOWSON, MD (November 1, 2017) – DEWALT announces two new 20V MAX* 1/2" Mid-Range Impact Wrenches (DCF894 and DCF894H). They are available in detent pin style for users who need maximum socket retention and hog ring style, for users who value quickly being able to change sockets. Each tool is ideal for use overhead or when space is constrained in applications that require high torque including plumbing, mechanical, concrete and masonry, automotive, steel erection, and elevator repair. At 3.48 lbs. (tool only) and 6.95" to the front of the anvil, the 20V MAX* 1/2" Mid-Range Impact Wrenches are compact yet deliver high-power and torque. Each tool achieves 330 ft.-lbs. of maximum torque, 0-3,100 impacts per minute, and no-load speeds from 0-900 and 0-2,000 RPM in two mode settings (low and high) designed for use in a wide variety of applications. These applications include threaded couplings, pipe flanges, wheel lugs, and concrete anchor setting, among others. The 20V MAX* 1/2" Mid-Range Impact Wrenches also features Precision Wrench™ Control which helps sense when a bolt is getting tight and pauses before impacting to help avoid over-torque. In reverse, Precision Wrench™ Control regulates how quickly a nut or bolt is removed, helping to prevent run-off. With an efficient brushless motor that provides increased efficiency and runtime over brushed units, the tool is a powerful cordless option. In addition, the Mid-Range Impact Wrench includes a variable speed trigger and LED light to help provide visibility in low light situations.
    [Show full text]
  • POWER TOOL SOLUTIONS for VEHICLE SERVICING Your Complete Tool Solution
    POWER TOOL SOLUTIONS FOR VEHICLE SERVICING YOUR COMPLETE TOOL SOLUTION 95 YEARS 95 YEARS OF DESIGN OF INNOVATION & MANUFACTURE From the beginning FACOM’s goal has been to listen to professionals to allow us to produce tools for them FACOM is internationally recognized as one of the best that would exceed their exacting requirements, while design and manufacturing brand in the industry. incorporating features that would make everyday tasks We manufacture to the highest quality standards and easier and safer. This fundamental philosophy is very design truly innovative professional hand and power much the driving force behind the Facom brand. tools for use across the world. Today, FACOM is Europe’s leading hand tool brand with This commitment is clearly evident by the number a range of over 9,000 products, including storage of personnel employed in our design teams, with over (trolleys, cabinets, benches, portable storage), standard 250 R&D engineers operating in 10 separate offices tools (wrenches, screwdrivers, pliers, hammers, air tools) dedicated to Facom product development. FACOM and specialist tools (automotive, electrical, aerospace) translates this R&D effort into efficient, high-quality to meet the needs of all professional tool users. products manufactured within 12 factories across Europe. 2 YOUR COMPLETE TOOL SOLUTION www.facom.com 3 IN-HOUSE POWER TOOL DESIGN LEADING PRODUCTS DEWALT® BATTERY PLUS A GREAT RANGE SWAP With over 95 years of automotive and industrial experience FACOM has developed a comprehensive power tools range to meet a vast range of job requirements, including: Our cordless tools now use the new premium lithium-ion battery platform.
    [Show full text]
  • 05/29/18 Tools & Home Improvement Auction
    09/27/21 12:18:09 05/29/18 Tools & Home Improvement Auction Auction Opens: Wed, May 23 3:30pm PT Auction Closes: Tue, May 29 5:30pm PT Lot Title Lot Title 0001 Husky 25 Gallon Mobile Toolbox 0029 Wiss Multi-Purpose Wire Cutters Model 0002 Husky 37" 50 Gallon Mobile Toolbox PWC9W 0003 2-Pack Window Insulation Shrink Kit 0030 Wiss Spring Assisted Folding Pocket Knife 0004 2-Pack Window Insulation Shrink Kit 0031 Wiss Quick Change Folding Utility Knife 0005 Frost King 9-Pack Window Insulation Shrink 0032 Wiss Auto Retracting Safety Utility Knife Kit 0033 Crescent Permabond 20oz. Rip Claw Hammer 0006 Bosch Self Leveling 30 ft Cross Line Laser 0034 Crescent 8" Pass Through Adjustable Wrench 0007 (2) Lengths of Frost King Door & Weather Seal Set 0008 (2) Lengths of Frost King Weather Stripping 0035 Crescent 7pc. SAE+MM Combo Nut Driver Socket Set 0009 (2) 10 ft Rubber Foam Self Stick Weather Seal 0036 Husky 6pc. Diamond Tip Magnetic Screwdriver 0010 Zircon HD25 Stud Sensor Set 0011 Zircon HD70 Stud Sensor 0037 Husky Gravity Feed HVLP Spray Gun 0012 Stanley Dual Melt Glue Gun GR25 0038 Husky High-Low Torque 1/2" Impact Wrench 0013 Stanley 10" Medium Duty Riveter Model MR33 0039 Husky Digital Sliding T-Bevel 0014 Ryobi Smart Works Moisture Meter for 0040 Husky 46pc. Stubby Wrench & Socket Set Smartphone 0041 Husky 23pc. Precision Screwdriver Set 0015 Stanley Powerlock 16 ft & Fatmax 25 ft Tape Measures 0042 Husky 2pc. Quad Drive Ratcheting Wrench Set 0016 (2) Stanley Utility Knives w/10 Spare Blades 0043 Husky 2" O.D.
    [Show full text]
  • Thousands of Products from a Single Source
    Abrasives Appliances & Fireplaces Bathroom Accessories Cabinets & Counter Tops Cutting Tools Fasteners Hand Tools Heating & Cooling Hose & Fittings Janitorial Supplies Material Handling Equipment Municipal Materials Pipe, Valves, Fittings, and Tubing Plumbing Supplies Thousands of Products Power Tools & Machinery from a Single Source... Protective Clothing & Safety Precision Measuring Tools Pumps & Compressors Residential Water Systems Shop Supplies Tool & Die and Mold Supplies www.trumbull.com Capabilities and Programs that add Value! Experience Since 1922, Trumbull Industries has provided the products you need when you need them. Trumbull has OVER 300 DEDICATED EMPLOYEES who are eager to provide prompt & friendly assistance. Quality We offer the BEST NAME BRANDS available and QUALITY SERVICE. If you need a supplier that you can count on for timely, accurate delivery, contact us! Inventory Trumbull Industries has over 100,000 PRODUCTS in stock both at the Master Distribution Center in Warren, Ohio and at your local Trumbull branch warehouse. Blanket Order Program Trumbull can maintain LOCAL INVENTORY of “special items” utilizing our blanket order program. If you need products that are factory specials or are difficult to purchase, let Trumbull help you develop a stocking program. Special Services Trumbull provides SPECIAL SERVICES for many customers. Quality inspections and documentation, certifications, custom invoicing are a few examples. Let Trumbull help design a program for you! Supply Chain Management Trumbull can help you develop
    [Show full text]
  • Version 12.10.19 Georgia Underground Superstore Has Built a Unique Business Around the Special Needs of Utility Contractors Like You
    version 12.10.19 Georgia Underground Superstore has built a unique business around the special needs of utility contractors like you. We are committed to maintaining a unique product mix so we can be your “one-stop shop” for both your equipment and supply needs. We look forward to earning your business by: • Stocking the products we carry so they are available when you need them • Offering quality products from leading manufacturers • Repairing and servicing the products we sell • Shipping your orders quickly—anywhere in the United States and beyond • Maintaining a knowledgeable staff that understands the utility construction business Our 31,000 sq. ft. The GUS Dallas, TX Superstore Staff warehouse allows us knows the business to reach and serve our and can show you national clientele. the latest products available. The Our addition of 61,000 sq. ft. The GUS stocking locations Atlanta warehouse Superstores in Houston, TX, stocks the product feature large and Prague, OK you need. A complete show rooms. (September 1, 2018), shop facility is They’re still will allow us to designed to meet growing! better serve your service and our customers. repair needs. Featured Manufacturers 3M Fall Protection/ Company, Inc. Capital Safety-USA ELVEX Corporation ACP International ERB Industries Inc. Allegro ERICO American Pipe & Erickson Manufacturing Plastics ERITECH American Polywater Etco Specialty Apex Tool Group, LLC Products Arrow Adhesives Fiber Fox America Company Gardner Bender Ashley Sling, Inc. Global Glove & Safety Atlas Copco Mfg Inc Construction G M P Equipment Greenlee Textron Inc. Avanti International Hastings Fiberglass Band-It H-E Parts International Benner Nawman Inc.
    [Show full text]
  • I Can Afford Only One Saw Right Now—So Which One Should I Buy, and What the Heck Is Your Hybrid-Cut
    “I Can Afford Only One Saw Right Now—So Which One Should I Buy, and What the Heck is Your Hybrid-Cut all About?” (How Bad Axe Tool Works Creates and Sharpens a Toothline) t’s early Thursday afternoon, and your PowerPoint presentation for the three o’clock meeting is done as it’s ever going to be. You’re surfing the web on your lunch break, sick of the virtual reality grind of Iyour job, and frustrated by those who answer to you or to whom you answer, because these people—coworkers and clients alike—do not share your ethos that excellence is simply not an option. Everywhere, it seems, people beg the question: “Who is John Galt?” They don’t actually say it, because they have no clue to begin with. They just live the question, day in, day out. You glance at your computer again, and shift your keyboard in place with renewed energy as you type out the URL for the website you want to visit. And you think about the project awaiting you for the weekend. You ‘ve been taking your frustrations out on the 4/4 quartersawn cherry and walnut and white oak you have carefully stockpiled at home in the basement workshop you’ve cobbled together over the past several months while developing a pronounced hand tool problem. And your lovely wife—commonly referred to as SWMBO (She Who Must be Obeyed) in Old Tool Galoot parlance—has confronted you about the amount of tools you’ve been snapping up on eBay with money you should have set aside to purchase the next iKea chest of drawers for your five-year-old.
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • Principles of Hand Tool Selection
    Loss Prevention Reference Note Principles of Hand Tool Selection Repetitive use of manual This reference note gives some of the ergo- or powered hand tools is often nomic principles that can help guide you in a factor in carpal tunnel syn- selecting the proper manual or powered hand drome and other hand and wrist tools for repetitive tasks. disorders. While most tools are General Principles satisfactory for general purpose use, they may be entirely inappropriate for con- Before selecting any tool, you should first tinual or repetitive use in a production situation. ensure that the work area is ergonomically sound in For instance, a 15-pound hand tool may be per- terms of work surface height, adjustable seating, fectly acceptable for occasional use,1 but tools that acceptable manual handling requirements, etc. (See are used frequently or repetitively should weigh no LP 185, “Ergonomic Recommendations for Work- more than 4 pounds (1.75 kg).2 In addition, the place Design.”) Tilting the work surface or using working environment as a whole may also have fixtures to hold, tilt, or rotate the work can help to be evaluated and corrected. A properly designed minimize awkward wrist motions and simplify hand tool used in an awkward posture will not tool selection. solve the problem. Powered hand tools, rather than manual, Hand tools vary con- Characteristics to Avoid should be used whenever siderably in shape, size, When Selecting Hand Tools possible, because re- and weight. The way a peated manual exertion tool is designed influ- ■ Sharp edges and corners on tool handles. is more likely to cause ences the hand positions ■ Narrow handles, which concentrate large discomfort and injury.
    [Show full text]
  • Essential Tools for Contractors
    2016 CONTRACTOR RESOURCE ESSENTIAL PRODUCTS FOR CONTRACTORS Insulated Tools Holemaking Test & Measurement Safety Equipment Cable & Bolt Cutters Wire Pulling & Conduit Tools Power Tool Accessories Work @ Height Pliers Torque Wrenches / Screwdrivers These days, it can be hard to find companies that make TABLE OF CONTENTS products you can count on. But that’s exactly what you’ll get from Pliers with Tether Ring 1 Klein Tools. We don’t just make great products, we make great products Fish Tapes, Lubricants & Accessories 2 that stand up to the demands of the Conduit Benders, Fish Rods & Accessories professionals who use them every day. 3 Because our standards are as high as Low Voltage Wire Pulling yours, we demand that every product we 4 offer delivers all the performance, Holemaking 5 durability and precision that you need to get the job done right. Test & Measurement and Accessories 6-7 And by using only the highest quality Electrical Testers materials, superior workmanship, and 8 keeping our manufacturing as close to Torque Tools 9 home as we can, we’re able uphold those rigorous standards. Power Tool Accessories 10-11 Klein isn’t just the name of our company, Personal Protective Safety Equipment / Gloves it’s also our family name, so we have to 12-14 be proud of everything we make. And Insulated Tools 15-16 since we’re an American company that’s been family-owned and family-run, since Cable Cutters 17 1857, you know you can count on us to be here tomorrow. Bolt Cutters 18 So buy a Klein tool and you’ll know what Reference Guide 19-20 all the professionals know…when you pick up a Klein, it’ll never let you down.
    [Show full text]