CRATING CRATING SPECIFICATIONS SPECIFICATIONS BRONZE STANDARD SILVER STANDARD Basic plywood crate with polystyrene foam or polystyrene 18mm plywood crate with , polyurethane foam with triwall. and triwall.

4 COMPONENTS 4 3 2 COMPONENTS 1 1. 18mm ply frame. 5 1. 18mm ply frame. 2. 19x70mm timber corners. 2. 18mm ply corners. 3. 45x95timber runners. 3. Front and back 18mm ply. 4. Front and back composed of 4. Closed with 60mm screws. 9mm ply reinforced with 19x70mm 5. Front sealed with neoprene timber batons. gasket. 5. Closed using 60mm screws. 6. Lined in tyvek. 6. Layer of 15mm triwall top bottom 7. 100x50mm polyurethane blocks and sides. top,bottom and sides. 7. Layer of 25mm polystyrene top 8. Layer of 15mm triwall front bottom and sides. and back. 8. Layer of 15mm triwall front 9. Triwall reinforced with 50mm and back. polyurethane strips. 9.Layer of 25mm polystyrene front 10. 45x95mm timber runners. and back.

3 2 10 5

6 7 1 7 9 9 8 8

6

55 56 CRATING CRATING SPECIFICATIONS SPECIFICATIONS GOLD AND DIAMOND STANDARD TRANSIT FRAME Full museum standard crate with (Diamond) and without 18mm travel frame with polythene sheeting, optional (Gold) weather protection. A frame and polyurethane support blocks. COMPONENTS COMPONENTS 3 1. Frame constructed with 12mm ply 4 2 5 2 1.18mm ply frame. reinforced with 75mm batons. 2. Rounded timber handles 550mm 2. Rounded timber handles 550mm from floor. from floor. 3. Front and back constructed with 3. 95x95mm timber runners. 18mm ply frame reinforced with 4. Front and back composed of 9mm corners. 12mm ply reinforced with 75mm 4. Closed using 60mm screws. batons. 5. 50mm polyurethane resting blocks 5. Closed using captive bolts. (Optional). 6. Layer of 12mm ply on top. 6. Sealed with polythene sheeting. 7. Front lid sealed with neoprene 7. ‘A’ frame can be added. gasket. 8. Metal handles also available. 8. Lined in tyvek. 9. Front can be sealed with poly- 9. Lining composed of 25mm and thene only. 50mm polyurethane foam. 10. Painted or varnished (Diamond). 10 4 1 3 6 7 7 9 8 6 1

5

58 57 SOFT PACK SOFT PACK SPECIFICATIONS SPECIFICATIONS UNGLAZED WORK GLAZED WORK Incorporating glassine, polythene, foam edging and kraft , Incorporating tape, polythene, foam edging and kraft card or triwall. paper, card or triwall.

1. Canvas is exposed. 1 1. Work is glass fronted. 1 2. A layer of glassine is applied. 2. Glass tape is applied. 3. A layer of polythene is added. 3. A layer of polythene is added. 4. Foam corners are added. 4. Foam corners are added. 5. Finished using , card or triwall. 5. Finished using kraft paper, card or triwall.

2 3 2 3

4 5

4 5

59

60