Handheld Raman Library
Total Page：16
File Type：pdf, Size：1020Kb
Load more
Recommended publications
-
Chemical Resistance: Deco-Trowel
CHEMICAL RESISTANCE DECO-TROWEL ® SERIES 223 Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com © December 16, 2019 by Tnemec Company, Inc. Chem223 Page 1 of 19 CHEMICAL RESISTANCE DECO-TROWEL ® | SERIES 223 COMMON PROBLEM AREAS FOR COATINGS AND SOLUTIONS Problem: Coating Solution: Points of failure Carefully and due to thin spots fully coat in coating Problem: Rough Pinhole Solution: Uneven Undercut Grind smooth welds Problem: Gaps between Solution: plates, coating Continuous can not cover welds Problem: Gaps between Solution: plates, coating Continuous can not cover welds Problem: Coating Sharp surface Solution: contours create Round the thin spots in contours coating Problem: Skip welding Solution: creates gaps Continuous that coating welds can not cover Problem: Skip welding Solution: creates gaps Continuous that coating welds can not cover 2 channels back to back IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other important information, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in a chemical exposure environment until the user has thoroughly read and understood the product information and full project details have been discussed with Tnemec Technical Service. Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com © December 16, 2019 by Tnemec Company, Inc. Chem223 Page 2 of 19 CHEMICAL RESISTANCE DECO-TROWEL ® | SERIES 223 ¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only. -
Chemical Resistance: Elasto-Shield
CHEMICAL RESISTANCE ELASTO-SHIELD ® SERIES 264 Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com © December 16, 2019 by Tnemec Company, Inc. Chem264 Page 1 of 7 CHEMICAL RESISTANCE ELASTO-SHIELD ® | SERIES 264 COMMON PROBLEM AREAS FOR COATINGS AND SOLUTIONS Problem: Coating Solution: Points of failure Carefully and due to thin spots fully coat in coating Problem: Rough Pinhole Solution: Uneven Undercut Grind smooth welds Problem: Gaps between Solution: plates, coating Continuous can not cover welds Problem: Gaps between Solution: plates, coating Continuous can not cover welds Problem: Coating Sharp surface Solution: contours create Round the thin spots in contours coating Problem: Skip welding Solution: creates gaps Continuous that coating welds can not cover Problem: Skip welding Solution: creates gaps Continuous that coating welds can not cover 2 channels back to back IMPORTANT: Definitions for the terms and acronyms used in this guide to describe the recommended exposures, along with other important information, can be found on the cover page of this guide or by contacting Tnemec Technical Service. Coatings should not be applied in a chemical exposure environment until the user has thoroughly read and understood the product information and full project details have been discussed with Tnemec Technical Service. Tnemec Company, Inc. 6800 Corporate Drive Kansas City, Missouri 64120-1372 +1 816-483-3400 www.tnemec.com © December 16, 2019 by Tnemec Company, Inc. Chem264 Page 2 of 7 CHEMICAL RESISTANCE ELASTO-SHIELD ® | SERIES 264 ¹ Product is NOT suitable for direct or indirect food contact. Intended Use and temperature information relates to product’s performance capabilities only. -
Prohibited and Restricted Chemical List
School Emergency Response Plan and Management Guide Prohibited and Restricted Chemical List PROHIBITED AND RESTRICTED CHEMICAL LIST Introduction After incidents of laboratory chemical contamination at several schools, DCPS, The American Association for the Advancement of Science (AAAS) and DC Fire and Emergency Management Services developed an aggressive program for chemical control to eliminate student and staff exposure to potential hazardous chemicals. Based upon this program, all principals are required to conduct a complete yearly inventory of all chemicals located at each school building to identify for the removal and disposal of any prohibited/banned chemicals. Prohibited chemicals are those that pose an inherent, immediate, and potentially life- threatening risk, injury, or impairment due to toxicity or other chemical properties to students, staff, or other occupants of the school. These chemicals are prohibited from use and/or storage at the school, and the school is prohibited from purchasing or accepting donations of such chemicals. Restricted chemicals are chemicals that are restricted by use and/or quantities. If restricted chemicals are present at the school, each storage location must be addressed in the school's written emergency plan. Also, plan maps must clearly denote the storage locations of these chemicals. Restricted chemicals—demonstration use only are a subclass in the Restricted chemicals list that are limited to instructor demonstration. Students may not participate in handling or preparation of restricted chemicals as part of a demonstration. If Restricted chemicals—demonstration use only are present at the school, each storage location must be addressed in the school's written emergency plan. Section 7: Appendices – October 2009 37 School Emergency Response Plan and Management Guide Prohibited and Restricted Chemical List Following is a table of chemicals that are Prohibited—banned, Restricted—academic curriculum use, and Restricted—demonstration use only. -
Department of Homeland Security (Dhs) Appendix a Chemicals of Interest (Coi)
DEPARTMENT OF HOMELAND SECURITY (DHS) APPENDIX A CHEMICALS OF INTEREST (COI) Acetaldehyde Bromine trifluoride Acetone Cyanohydrin, stabilized Bromothrifluorethylene Acetyl bromide 1,3-Butadiene Acetyl chloride Butane Acetyl iodide Butene Acetylene 1-Butene Acrolein 2-Butene Acrylonitrile 2-Butene-cis Acrylyl chloride 2-Butene-trans Allyl alcohol Butyltrichlorosilane Allylamine Calcium hydrosulfite Allyltrichlorosilane, stabilized Calcium phosphide Aluminum (powder) Carbon disulfide Aluminum Bromide, anhydrous Carbon oxysulfide Aluminum Chloride, anhydrous Carbonyl fluoride Aluminum phosphide Carbonyl sulfide Ammonia (anhydrous) Chlorine Ammonia (conc 20% or greater) Chlorine dioxide Ammonium nitrate, note #1 Chlorine monoxide Ammonium nitrate, note #2 Chlorine pentafluoride Ammonium perchlorate Chlorine trifluoride Ammonium picrate Chloroacetyl chloride Amyltrichlorosilane 2-Chloroethylchloro-methylsulfide Antimony pentafluoride Chloroform Arsenic trichloride Chloromethyl ether Arsine Chloromethyl methyl ether Barium azide 1-Chloropropylene 1,4-Bis(2-chloroethylthio)-n-butane 2-Chloropropylene Bis(2-chloroethylthio) methane Chlorosarin Bis(2-chloroethylthiomethyl)ether Chlorosoman 1,5-Bis(2-chloroethylthio)-n-pentane Chlorosulfonic acid 1,3-Bis(2-chloroethylthio)-n-propane Chromium oxychloride Boron tribromide Crotonaldehyde Boron trichloride Crotonaldehyde, (E)- Boron trifluoride Cyanogen Boron trifluoride compound with methyl Cyanogen chloride ether (1:1) Cyclohexylamine Bromine Cyclohexyltrichlorosilane Bromine chloride Cyclopropane -
UAH Chemical Hygiene Plan
UAH CHEMICAL HYGIENE Effective Date: Feb. 2014 PLAN The Campus Chemical Hygiene Plan (Campus CHP) was developed to ensure the safety of laboratory employees and maintain compliance with the OSHA Laboratory Standard. In addition to OSHA regulations, this document also presents key information on the practices and procedures that must be implemented to maintain compliance with other state, federal, and local regulations required for the use and storage of hazardous chemicals. Prepared by: The Office of Environmental Health & Safety Contents 1. Introduction .............................................................................................................................. 1 1.1 Purpose .................................................................................................................................................. 1 1.2 Background on Regulatory Compliance .................................................................................... 1 1.3 Chemical Hygiene Plan Overview ................................................................................................. 2 1.4 Scope and Applicability .................................................................................................................... 3 1.5 Implementation of the Plan ............................................................................................................ 4 1.6 Availability of the Plan ..................................................................................................................... 4 1.7 Annual -
1 S1ab13 29211900 29211900 Mc
Product HS Code Product S/N Code AHTN 2007 AHTN 2012 UOM Product Description 1 S1AB13 29211900 29211900 MC - HN1: BIS(2-CHLOROETHYL)ETHYLAMINE 2 S1AB14 29211900 29211900 MC - HN2: BIS(2-CHLOROETHYL)METHYLAMINE 3 S1AB15 29211900 29211900 MC - HN3: TRIS(2-CHLOROETHYL)AMINE O-ALKYL (H OR <= C10, INCL. CYCLOALKYL) S-2-DIALKYL (ME, ET, N-PR OR I-PR)-AMINOETHYL ALKYL (ME, ET, N-PR OR I-PR) PHOSPHONOTHIOLATES AND CORRESPONDING ALKYLATED OR PROTONATED SALTS E.G. - VX: O-ETHYL S-2- 4 S1AN03 29309000 29309090 MC DIISOPROPYLAMINOETHYL METHYL PHOSPHONOTHIOLATE 5 S1AB01 29309000 29309090 MC - 2- CHLOROETHYLCHLOROMETHYLSULFIDE 6 S1AB02 29309000 29309090 MC - MUSTARD GAS: BIS(2-CHLOROETHYL)SULFIDE 7 S1AB03 29309000 29309090 MC - BIS(2-CHLOROETHYLTHIO)METHANE 8 S1AB04 29309000 29309090 MC - SESQUIMUSTARD: 1,2-BIS(2-CHLOROETHYLTHIO)ETHANE 9 S1AB05 29309000 29309090 MC - 1,3-BIS(2-CHLOROETHYLTHIO)-N-PROPANE 10 S1AB06 29309000 29309090 MC - 1,4-BIS(2-CHLOROETHYLTHIO)-N-BUTANE 11 S1AB07 29309000 29309090 MC - 1,5-BIS(2-CHLOROETHYLTHIO)-N-PENTANE 12 S1AB08 29309000 29309090 MC - BIS(2-CHLOROETHYLTHIOMETHYL)ETHER 13 S1AB09 29309000 29309090 MC - O-MUSTARD: BIS(2-CHLOROETHYLTHIOETHYL)ETHER O-ALKYL (<= C10, INCL. CYCLOALKYL) ALKYL (ME, ET, N-PR OR I-PR)- PHOSPHONOFLUORIDATES E.G. - SARIN: O-ISOPROPYL METHYLPHOSPHONOFLUORIDATE, - SOMAN: O-PINACOLYL 14 S1AN01 29310090 29319090 MC METHYLPHOSPHONOFLUORIDATE O-ALKYL (<= C10, INCL. CYCLOALKYL) N,N-DIALKYL (ME, ET, N-PR OR I- PR) PHOSPHORAMIDOCYANIDATES E.G. - TABUN: O-ETHYL N,N- 15 S1AN02 29310090 29319090 MC DIMETHYL PHOSPHORAMIDOCYANIDATE 29319041 (For liquid forms) or 29319049 (For other 16 S1AB10 29310040 forms) MC - LEWISITE 1: 2-CHLOROVINYLDICHLOROARSINE 29319041 (For liquid forms) or 29319049 (For other 17 S1AB11 29310040 forms) MC - LEWISITE 2: BIS(2-CHLOROVINYL)CHLOROARSINE 29319041 (For liquid forms) or 29319049 (For other 18 S1AB12 29310040 forms) MC - LEWISITE 3: TRIS(2-CHLOROVINYL)ARSINE 19 S1AT01 30029000 30029000 MC SAXITOXIN 20 S1AT02 30029000 30029000 MC RICIN ALKYL (ME, ET, N-PR OR I-PR) PHOSPHONYLDIFLUORIDES E.G. -
Ajax Finechem Product Catalogue 3510 585 6
ACE AJAX FINECHEM PRODUCT CATALOGUE 3510 ACETONE, HPLC GRADE, BURDICK & JACKSON, CAT. AH010 Assay ……………………………………………………….. 99.9% min. Maximum limit of impurities (%) Water ……………………………………………………….. 0.5 Residue ……………………………………………………… 3mg/L Max. UV. Absorbance: λ(nm) 330 340 350 375 400 Absorbance 1.000 0.080 0.010 0.005 0.005 Pack Size: 4L 585 ACETONE, SPECTROSOL Description: clear liquid; characteristic odour. For U.V. spectroscopy. Assay (by GLC) ……………………………………………….. 99.5% min. Colour (APHA) …………………………………............ 10 max. Density (@ 25°C ) ……………………………………… 0.7857g/mL max. U.V absorbance λ(nm) 330 340 350 400 Max abs. 1.00 0.1 0.02 0.01 Maximum limit of impurities (%) R.A.E. ……………………………………………………….. 0.001 Sol. in H2O ………………………………………………… To pass test Titratable acid …………………………………………… 0.03 mmol H Titratable base ………………………………………….. 0.06 mmol OH Aldehyde (as HCHO) ………………………………….. 0.002 CH3OH ………………………………………………………. 0.05 Propan-2-ol ……………………………………………….. 0.05 Subs. red. KMnO4 (as O) …………………………….. 0.0005 H2O ………………………………………………………….. 0.5 Conforms to ACS Pack Size: 500mL 6 ACETONE, UNIVAR Description: clear liquid with a characteristic odour. Assay( by GLC) ………………………………………….. 99.5% min. Colour (APHA) …………………………………………… 10 max. Density (@ 25oC) ……………………………….......... 0.7857g/mL max. Maximum limit of impurities (%) R.A.E. ……………………………………………………….. 0.001 Cd …………………………………………………. 0.000005 Sol. in H2O …………………………………………………. To pass test Pb ………………………………………………….. 0.000005 Titratable acid ……………………………………………. 0.03 mmol H Ca………………………………………………….. 0.00005 Titratable base …………………………………………… 0.06 mmol OH Zn ………………………………………………….. 0.00005 Aldehyde (as HCHO) …………………………………… 0.002 Na …………………………………………………. 0.00005 Methanol, Propan-2-ol (each) ………………………. 0.05 K …………………………………………………….. 0.00005 Fe …………………………………………………………….. 0.00002 Cr…………………………………………………… 0.000002 Subs. red. KMnO4`……………………………………….. To pass test Co ………………………………………………….. 0.000002 H2O …………………………………………………………… 0.5 Cu ………………………………………………….. 0.000002 Al ……………………………………………………………… 0.00001 Mn …………………………………………………. -
The Following 24 Chemicals Are Explosive Precursors. This Iist Is Not
Name Description Odour Acetic Anhydride Colourless Liquid Vinegar Acetone Colourless Liquid Fruit/Nail Varnish Remover Aluminium Powder Silver/Grey Powder Odourless Ammonium Nitrate Colourless Ammonia Ammonium Perchlorate Grainy White Powder Odourless Barium Nitrate White Crystals (Not Documented) Highly Toxic Calcium Ammonium Nitrate Colourless Liquid Ammonia Guanidine Nitrate Colourless Crystals Odourless Hexamine Waxy Solid Mild Ammonia Hydrogen Peroxide Colourless Liquid Odourless Nitric Acid Colourless, Yellow or Red Crystals Acrid Explosive Precursor Chemicals Nitromethane Colourless Oily Liquid Sweet/Fruit Perchloric Acid Colourless Liquid Odourless EXPLOSIVE Potassium Chlorate White Crystals Odourless Potassium Nitrate White Crystals Odourless Potassium Nitrite Yellow/White Crystals Odourless Potassium Perchlorate White/Colourless Crystals Odourless PRECURSOR Sodium Azide White Crystals Odourless Sodium Chlorate White Crystals Odourless Sodium Nitrate White Crystals Odourless CHEMICALS Sodium Nitrite Yellow/White Crystals Odourless Sodium Perchlorate White Crystals Odourless Sulphuric Acid Colourless Liquid Rotten Eggs The following 24 chemicals are explosive precursors. This Urea White Crystals Ammonia Iist is not extensive, however those that appear below are Acetic Acid White Crystals Vinegar regulated and subject to controls by one or more of the Alcohol (Ethanol, Methanol) Colourless Liquid Odourless national governments and agencies in Canada, USA, EU, UK, Anything Chlorate or Perchlorate Australia and Singapore and raise -
CSAT Top-Screen Questions OMB PRA # 1670-0007 Expires: 5/31/2011
CSAT Top-Screen Questions January 2009 Version 2.8 CSAT Top-Screen Questions OMB PRA # 1670-0007 Expires: 5/31/2011 Change Log .........................................................................................................3 CVI Authorizing Statements...............................................................................4 General ................................................................................................................6 Facility Description.................................................................................................................... 7 Facility Regulatory Mandates ................................................................................................... 7 EPA RMP Facility Identifier....................................................................................................... 9 Refinery Capacity....................................................................................................................... 9 Refinery Market Share ............................................................................................................. 10 Airport Fuels Supplier ............................................................................................................. 11 Military Installation Supplier................................................................................................... 11 Liquefied Natural Gas (LNG) Capacity................................................................................... 12 Liquefied Natural Gas Exclusion -
Chemical Compatibility Storage Group
CHEMICAL SEGREGATION Chemicals are to be segregated into 11 different categories depending on the compatibility of that chemical with other chemicals The Storage Groups are as follows: Group A – Compatible Organic Acids Group B – Compatible Pyrophoric & Water Reactive Materials Group C – Compatible Inorganic Bases Group D – Compatible Organic Acids Group E – Compatible Oxidizers including Peroxides Group F– Compatible Inorganic Acids not including Oxidizers or Combustible Group G – Not Intrinsically Reactive or Flammable or Combustible Group J* – Poison Compressed Gases Group K* – Compatible Explosive or other highly Unstable Material Group L – Non-Reactive Flammable and Combustible, including solvents Group X* – Incompatible with ALL other storage groups The following is a list of chemicals and their compatibility storage codes. This is not a complete list of chemicals, but is provided to give examples of each storage group: Storage Group A 94‐75‐7 2,4‐D (2,4‐Dichlorophenoxyacetic acid) 94‐82‐6 2,4‐DB 609-99-4 3,5-Dinitrosalicylic acid 64‐19‐7 Acetic acid (Flammable liquid @ 102°F avoid alcohols, Amines, ox agents see SDS) 631-61-8 Acetic acid, Ammonium salt (Ammonium acetate) 108-24-7 Acetic anhydride (Flammable liquid @102°F avoid alcohols see SDS) 79‐10‐7 Acrylic acid Peroxide Former 65‐85‐0 Benzoic acid 98‐07‐7 Benzotrichloride 98‐88‐4 Benzoyl chloride 107-92-6 Butyric Acid 115‐28‐6 Chlorendic acid 79‐11‐8 Chloroacetic acid 627‐11‐2 Chloroethyl chloroformate 77‐92‐9 Citric acid 5949-29-1 Citric acid monohydrate 57-00-1 Creatine 20624-25-3 -
Particularly Hazardous Substances Human Reproductive Page 1 of 25 March 2011 Carcinogen Hazard
Particularly Hazardous Substances Human Reproductive Page 1 of 25 March 2011 Carcinogen Hazard CAS Number order Acutely Probable Reactive Female Known Toxic Male CAS Fetal Number Chemical 00–00–1 Nickel compounds 00–00–2 Chromium [VI] Compunds 00–00–3 Cadmium compounds 00–00–4 Chlorophenols (polychlorophenols) 00–00–5 Hexachlorocyclohexanes 00–00–6 Lead compounds, inorganic 00–00–7 Methyl and other organic mercury compounds 00–01–0 Polychlorinated biphenyls (PCBs) ‐ all forms 00–01–1 Organolithium compounds 00–01–3 Botulinum Toxins 00–01–4 Clostridium perfringens, epsilon toxin 00–01–5 Conotoxins 00–01–6 Ricin isolates 00–01–7 Saxitoxins 00–01–8 Staphylococcal enterotoxins 00–01–9 Tetrodotoxins 00–02–0 Tricothecene mycotoxins 50–00–0 Formaldehyde (Formalin) (Paraformaldeyde) 50–06–6 Phenobarbital 50–07–7 Mitomycin C 50–18–0 Cyclophosphamide 50–29–3 DDT [p,p'‐DDT] 50–32–8 Benzo[a]pyrene 50–35–1 Thalidomide 50–55–5 Reserpine 51–21–8 5‐Fluorouracil 51–28–5 Dinitrophenol Particularly Hazardous Substances Human Reproductive Page 2 of 25 March 2011 Carcinogen Hazard CAS Number order Acutely Probable Reactive Female Known Toxic Male CAS Fetal Number Chemical 51–52–5 Propylthiouracil 51–75–2 HN2 (nitrogen mustard‐2) 51–79–6 Ethyl carbamate (Urethane) 52–24–4 Thiotepa 52–67–5 Valine, 3‐mercapto‐, D‐ 53–70–3 Dibenz [a,h]anthracene 53–96–3 2‐acetylaminofluorene 54–62–6 Aminopterin 55–18–5 N‐Nitrosodiethylamine 55–63–0 Nitrogycerine 55–86–7 Nitrogen Mustard Hydrochloride 55–98–1 1,4‐Butanediol dimethanesulfonate (Busulfan; Myleran) 56–04–2 Methylthiouracil -
Chemical Weapons Technology Section 4—Chemical Weapons Technology
SECTION IV CHEMICAL WEAPONS TECHNOLOGY SECTION 4—CHEMICAL WEAPONS TECHNOLOGY Scope Highlights 4.1 Chemical Material Production ........................................................II-4-8 4.2 Dissemination, Dispersion, and Weapons Testing ..........................II-4-22 • Chemical weapons (CW) are relatively inexpensive to produce. 4.3 Detection, Warning, and Identification...........................................II-4-27 • CW can affect opposing forces without damaging infrastructure. 4.4 Chemical Defense Systems ............................................................II-4-34 • CW can be psychologically devastating. • Blister agents create casualties requiring attention and inhibiting BACKGROUND force efficiency. • Defensive measures can be taken to negate the effect of CW. Chemical weapons are defined as weapons using the toxic properties of chemi- • Donning of protective gear reduces combat efficiency of troops. cal substances rather than their explosive properties to produce physical or physiologi- • Key to employment is dissemination and dispersion of agents. cal effects on an enemy. Although instances of what might be styled as chemical weapons date to antiquity, much of the lore of chemical weapons as viewed today has • CW are highly susceptible to environmental effects (temperature, its origins in World War I. During that conflict “gas” (actually an aerosol or vapor) winds). was used effectively on numerous occasions by both sides to alter the outcome of • Offensive use of CW complicates command and control and battles. A significant number of battlefield casualties were sustained. The Geneva logistics problems. Protocol, prohibiting use of chemical weapons in warfare, was signed in 1925. Sev- eral nations, the United States included, signed with a reservation forswearing only the first use of the weapons and reserved the right to retaliate in kind if chemical weapons were used against them.