Industrial Tooling &SolutionsSince1965

JUL-SEP2020 0-6" ABSOLUTE Digimatic Caliper ® With SPC Output & Thumb Roller Water Wizard The Next Generation Series 500 of Electronic ! Submersible FEATURES: Utility Pump • Resolution: .0005" (.01mm). • At turn-on, the large LCD screen displays the actual slider position FEATURES: ready to start measurement. • 1/6 HP shaded pole • Keeps track of its origin point once set. motor with overload protection. • No more repeated zero setting necessary Range: 0-6" (0-150mm) • Designed for continuous duty. with the absolute encoder technology as Part No. 1-808-500171 • Epoxy coated cast well as no more care for overspeed errors. $ 80 aluminum housing. • Supplied in a fitted plastic case. Reg. Net Price $188.00 159 • Viton shaft seal. INCLUDES: r • Garden hose adapter. • Removable inlet screen for easy cleaning. • Lifetime oil supply. APXT Coated d d1 • Pumps down to 1/8". 11o • 10 ft. power cord. Carbide Inserts 85o L T Model 5-MSP 85° APXT, Parallelogram, 11° Positive Rake Part No. 1-440-505000 $ 10 Dimensions Grade PC-5300 Grade PC-5300: Reg. Net Price $157.62 126 Insert Part No. Reg. For of steel. Style L d T r d1 6-APX- Net Price SALE! Tough sub-micron substrate. Has low co- APXT 1035PDSR-MM 0.407" 0.263" 0.12" 0.020" 0.112" -200 $12.50 $9.38 efficient of frictions to APXT 1604PDSR-MM 0.650 0.376 0.227 0.031 0.175 -210 15.50 11.63 prevent built-up edge. 29 Pc. Jobbers Set 8220-1/28 12V Max Cordless HIGH SPEED STEEL Rotary Kit RIGHT HAND 118o POINT FEATURES: KIT INCLUDES: • 12V MAX Lithium-Ion battery technology, • (28) Accessories. 33% longer run-time than the Dremel 8200 • (1) . cordless rotary tool when screws. • (1) Micro-Case. Jobbers length • Separate on/off switch and speed control. are designed 1/16" - 1/2" by 64ths • Cool-running ball bearing construction. to perform in a • Variable Speed: 5,000 to 30,000 RPM. wide variety of normal Part No. 1-001A-0290 • Can use with all Dremel rotary More information conditions and in a Reg. Net Price $138.18 tool accessories & attachments. broad range of materials @ KBCTools.com in both machine and $ 54 portable . 110 Part No. 1-829-8220 $ 58 Reg. Net Price $140.68 119

®

® 9" x 16" Horizontal FREE GORILLAGRIP 9 PC. FOLD-UP HEX END TOOL SET 1-1/2 HP, 115/120V, 1 PH

$ 00 FEATURES: With Any Online Order 99 or More! • 9" round, 3" x 16" or PART NO. 1-927-12591FG 9" x 13" rectangular capacity @ 90°. • 4 blade speeds with 1" x 129" blade. INCH SIZES .050" - 3/16" • Hydraulic feed control. • Built-in coolant system. COUPON CODE: FREE720U Model BAH-916 Spare H.S. Part No. 6-271-025 $70.00 Valid 7/1/20 - 9/30/20 Blade Included Value! $ 15 Registered Customers Only. $ 00 FREE A 5 Value! One Time Use. 2,695

WEB: PHONE: M-F 8am - 8pm, EST FAX: FAX ORDERS 24/7 KBCTools.com 1-800-521-1740 1-800-322-4292 QUICK INDEX Cutting ...... 1, 3-7 Industrial Metalworking Tooling & Solutions Since 1965 Carbide Tooling ...... 3, 8-9 Fluids ...... 1, 3, 32, 36 Workholding Tools ...... 10-13 Cart Abrasives ...... 14-15, 36 FEATURES: Measuring & Inspection ...... 1-2, 16-21, 36 • Designed to store and • Additional shelves for transport most MIG storing accessories. Part No. Toolroom Accessories ...... 22-23 and plasma machines, • Front wheel swivel casters. 1-701-41197 Hand Tools ...... 2-3, 33 shielding gas tanks • Heavy duty molded Reg. Net and other welding rear wheels. Price $109.44 Shop Supplies ...... 1-3, 30-31, 35-36 equipment & accessories. • Top Shelf Dimensions: • Front mounted handle 11" W x 17-1/2" L. $ 99 Power / Air Tools ...... 1, 34 for easy maneuverability. • Overall Cart Dimensions: 79 • Tilted top shelf allows 32" H x 27.64" L x 17" W. Machinery ...... 1, 24-29 access to welder controls. • Includes (2) Safety • Side hooks for torch chains to secure and cable storage. shielding gas tanks. • Durable steel construction.

100% SATISFACTION GUARANTEED: 12 Pc. Combination If you are not 100% N Internal/External satisfied for any reason just S A I O return the unused item(s) in T CT Snap Ring Plier Set its original packaging within ISFA 30 days, with your receipt for a FEATURES: • Convertible for use replacement, exchange, full credit or refund. on int/ext snap rings. • Individual packaged FREE SHIPPING: in a plastic hanger. SET INCLUDES: Orders over $275.00 (50 lbs. weight limit per order) • 6" Straight, Bent 45˚, & • Knurled center screw with SHIPPED FREE - via our standard shipping method. spring for easy changing Bent 90˚ with .038" tip. Ye Some restrictions may apply.s! We’re We’re Keepin and secure hold. • 6" Straight, Bent 45˚, & g • Cushioned grip handles. Bent 90˚ with .047" tip. Nort • 7-1/2" Straight, Bent 45˚, 99% of All OrdersOPEN h America & Bent 90˚ with .070" tip. Ship the Same Day... WORKING Model 3495 Plier Set • 9-1/4" Straight, Bent 45˚, Or you can Pick Up at your Part No. 1-820-343 $ 70 & Bent 90˚ with .090" tip. Local Branch.* Your Choice. More information @ KBCTools.com Reg. Net Price $107.60 80 • Plastic blow molded case. * Excludes Machinery & Non-Stock Items.

™ DAMAGED, LOST, OR SHORT SHIPMENTS: WorkTunes Wireless It doesn’t happen often, but if it does, call your local Hearing Protector courier office immediately, and advise KBC so that COUNTwith Bluetooth® 9" Electronic we can reship and place a claim. Please keep dam- Technology aged goods and containers until the claim is closed. onWe’re KBC! Keepin g Level Yes! We’re FEATURES:North America TRUCK SHIPMENTS: • Seamlessly stream music, sports, KBC is not responsible for merchandiseOPEN damaged WradioORKING and more from mobile phones, tablets, or any or lost by motor freight carriers. If the shipment is other Bluetooth® wireless technology enabled device. damaged or short one or more packages, please • Audio assist technology provides setup and operational have it noted by the truck driver on receipt and guidance without having to remove the headset. Not Included. freight bill. If you accept a short or damaged • Rotary dial allows you to operate your device FEATURES: We’re Keepin g from the headset, eliminating cords. • Resolution: .05° Instant 4x 90 Yeshipments! We’r frome the truck driver without proper COUNT inclination display!o digital notation by the driver, youNo rtdoh so America at your own risk. • MP3 compatible and • Accuracy: ±.2° onenhanced KBC! AM/FM digital radio • Repeatability: ±.05 OPEN WORKING performance for clearer sound. • Measuring Range: 4 x 90° PRICING: • Vented headband design • Dimensions: 9" L x 1" W x 2-1/4" H KBC Tools & Machinery traditionally holds prices with removable padding • Standard 9 volt battery (250 hours of life) for the duration of its sales flyers. As industrial for use with hats. • Includes two-way level and plumb vials. market conditions continue to change across North • Safe Volume Control • Embedded magnets on the measuring America (tariffs, raw material, and price increases), You Technology can allows for surface, a beam-splitter projects a 90° KBC reserves the right toCOUNT change prices based upon increased volume yet laser cross hair for leveling at a distance. inventory conditions andon supplier KBC! price increases COUNT corrects to maintain safe • Reversible reading for inverted use. without notice. BUY NOW! KBC Tools & Machinery on levels over an 8-hour workday. • 1/4"-20 mount for tripod use. strives to be your choice for all your tooling needs. • NRR:KBC! 24 dB You can Part No. 54-440-600 Reg. Net Price $81.50 MINIMUM ORDER: PartCOUNT No. 1-720-90542 Only $25.00, to cover processing costs. on KBC! $ 78 $ 28 We’re Keepin g Reg. Net Price $109.15 92 YeOOPS!:s! We’r e 69 Errors do occur, so mistakesNorth are America subject OPENto correction. Sorry for WanyORKING inconvenience. You can 24/7 All Tools... COUNTYou can All The Time. GSA Contract #BPA-GS-06F-4KBCTYou can on COUNT COUNT KBC!on KBC! We’re Keepin g on KBC! Yes! We’re FLAT RATE Contact-FreeCOUNT Service: North America SHIPPING 24/7 PICK-UP - Order Shipmenton KBC! EnsuringOPEN Safety: WORKING LOCKERS - Locker or - Scheduled Cleanings Curbside Pick-up - Social Distancing On All Check out the big You can Online Orders red lockers outside our COUNT COUNTup to 50 lbs. KBC Michigan location. on Just order during regular Fast Service: KBC! onSome KBC! restrictions may apply. - Quick Order Turn-Around 99% business hours and pick - Easy Online Ordering of All Orders Ship Same Day* FREE SHIPPING up your order anytime! *Excludes Machinery & Non-Stock Items ORDERS OVER $27500 You can Your tools... your time. COUNT on KBC! 2 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com You can You can COUNT COUNT on KBC! on KBC!

You can COUNT on KBC! I PRO-X Mill Indexable r I XEKT Carbide Inserts r d1 Kits GRADE H01 - Equivalent to K10-K20 FEATURES: grade. Recommended cutting speed 20° • Good chip flow and less build up edge td1 1,000-2,600 SFM. Excellent for are achieved through buffed surface of insert. 20° aluminum and other non-ferrous metals. I2 • Strong clamping due to the concave face of insert bottom side. t • Specially designed for high speed of aluminum. I2Dimensions • Suitable for shouldering and curved surface machining. Insert Part No. Reg. • High rake angle of insert provides good Style l l2 t r d 6-XEK- Net Price SALE! and low cutting load. XEKT 19M504FR-MA .709" .646" .197" .016" .171" -19043 $26.20 $20.96 XEKT 19M508FR-MA .709 .646 .197 .031 .171 -19083 26.20 20.96 KITS INCLUDE: XEKT 19M516FR-MA .689 .646 .197 .063 .171 -19163 26.20 20.96 • (1) PRO-X Mill Cutter. XEKT 19M532FR-MA .689 .646 .197 .126 .171 -19323 26.20 20.96 • (10) XEKT19M508FR-MA Inserts (Grade H01). • Wrench, Grease, & Literature. INDEXABLE END MILLS INDEXABLE FACE MILLS Cutting Cutting Shank Cutting No. of Part No. Cutting Arbor Cutting No. of Part No. Dia. OAL Length Dia. Depth Inserts 1-244- ONLY! Dia. Height Hole Depth Inserts 1-244- ONLY! 3/4" 5.12" 2.36" 3/4" .670" 1 -1035 $231.00 1-1/2" 1-1/2" 1/2" .670" 3 -153N $286.00 1 5.51 2.36 1 .670 2 -104N 242.00 2 1-3/4 3/4 .670 4 -2075 297.00 1-1/4 5.91 2.76 1-1/4 .670 2 -127N 253.00 3 2 1 .670 5 -307N 330.00 1-1/2 6.30 2.76 1-1/2 .670 3 -156 297.00 4 2-1/2 1-1/2 .670 6 -407N 352.00

Industrial ® Way Oils Extra Long 16 oz. Fiberglass Taper Shank Handle Rubber FEATURES: Drill • 5 viscosity grades of lubricant. Mallet Part No. • Oils are non-corrosive & 1-909-3166 protect against wear & stick-slip. FEATURES: • For use on machine ways and slideways. HIGH • High-strength fiberglass handle SPEED core helps absorb vibrations. $ 55 20 WT Grade 30 WT Grade STEEL • Exterior poly jacket protects 7 Part No. 1-820-720 Part No. 1-820-730 handle core from missed strikes. Reg. Net Reg. Net • Double-faced solid rubber head delivers a softened, positive strike. Price $16.90 Price $16.90 • Made for construction, woodworking, $ 21 $ 21 metal , and automotive applications. 15 15 • Soft and comfortable, non-slip rubber grip. 118° POINT

® Leather Welder Made to fit Morse tapered Gloves holders. Designed to 16 oz. Jacketed perform in a broad range of materials in the iron Fiberglass FEATURES: and steel families, where • Insulated. extra length is required Claw • Fleece lining. for hard-to-reach areas. • Gauntlet cuff. FEATURES: Part No. • High-strength fiberglass 1-909-30123 • Made of gray B grade 1-1/2" x 60" OAL split shoulder cow leather. handle is protected by an • 13" 1 pc. back, self hemmed, Part No. 1-071K-132 impact-resistant poly jacket. $ 30 and have a full sock lining. Reg. Net Price $735.00 • Soft, comfortable rubber grip provides sure, non-slip control. 10 Size: Extra-Large $ 75 • Sharpened curved claw generates maximum nail-pulling leverage. Part No. $ 80 183 • Permanent head-to-handle epoxy 1-700-004 9 bond will not loosen over time.

Style C Carbide Toolbits Quicksetting Putty 3/4 Lb. Kit Part No. 1-820-16130 Micro-Grain Carbide +PLUS! Exotic metrology - grade rubber Reg. Net Price $235.60 self-curing in minutes. Virtually MICRO 100 is a space age, micro grain perfect replica casting of internal $ 26 carbide of excellent quality. It is in a class & external forms. Excellent for 200 of it’s own, resulting from the exclusive treating process. Considerably prolongs checking optical comparators. 3° Non-toxic easy to use 100 times tool life in machining all hard stainless faster than RTV silicones. No steels, efficiently performs in exotic A W release agent is ever needed. metals. Provides vastly increased speed 3° C T and feed rates in cutting aluminum, L copper, stainless steels, high temperature T Roll two equal-sized balls of alloys, thermoplastics and composites B catalyst putty and base putty used in the aircraft industry. 8° and simply knead them together 10° like dough. Excellent for external shapes, also cast internal shapes Dimensions and cavities, but some pressure Shank Tip Part No. Reg. Square should be applied such as a A B C T W L 1-428- Net Price SALE! Nose Tool weighted object on top. 1/4" 1/4" 2" 1/16" 1/4" 1/4" -C4 $12.45 $10.58 5/16 5/16 2-1/4 3/32 5/16 3/8 -C5 13.15 11.18 3/8 3/8 2-1/2 3/32 3/8 3/8 -C6 13.55 11.52 Final Color - Light Blue 7/16 7/16 3 3/32 7/16 1/2 -C7 13.70 11.65 Manipulation time: 3 - 4 min. 1/2 1/2 3-1/2 1/8 1/2 1/2 -C8 14.20 12.07 Cure time: 8 - 10 min. 5/8 5/8 4 5/32 5/8 5/8 -C10 25.10 21.34 3/4 3/4 4-1/2 3/16 3/4 3/4 -C12 30.90 26.27

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 3 CUTTING TOOLS TiN Coated Jobbers FRACTIONAL SIZES 118° POINT Jobbers Drills Drills HIGH SPEED STEEL RIGHT HAND FRACTIONAL SIZES Part No. Reg. Size OAL 1-001TA- Net Price SALE! 3/32" 2-1/4" -006 $1.42 $1.14 7/64 2-5/8 -007 1.52 1.22 1/8 2-3/4 -008 1.52 1.22 9/64 2-7/8 -009 1.65 1.32 Part No. Reg. Part No. Reg. 5/32 3-1/8 -010 1.66 1.33 RIGHT HAND Size OAL 1-001A- Net Price SALE! Size OAL 1-001A- Net Price NOW! 11/64 3-1/4 -011 1.82 1.46 -012 2.03 HIGH SPEED STEEL 1/16" 1-7/8" -004 $1.37 $1.10 19/64" 4-3/8" -019 $3.90 $3.12 3/16 3-1/2 1.62 5/64 2 -005 1.38 1.10 5/16 4-1/2 -020 4.31 3.45 13/64 3-5/8 -013 2.22 1.78 TiN TIPPED 7/32 3-3/4 -014 2.47 1.98 3/32 2-1/4 -006 1.38 1.10 21/64 4-5/8 -021 4.80 3.84 -015 2.68 7/64 2-5/8 -007 1.45 1.16 11/32 4-3/4 -022 5.29 4.23 15/64 3-7/8 2.14 118° POINT 1/8 2-3/4 -008 1.40 1.12 23/64 4-7/8 -023 6.00 4.80 1/4 4 -016 2.85 2.28 9/64 2-7/8 -009 1.56 1.25 3/8 5 -024 6.11 4.89 17/64 4-1/8 -017 3.41 2.73 Jobbers length drills 5/32 3-1/8 -010 1.58 1.26 25/64 5-1/8 -025 7.00 5.60 9/32 4-1/4 -018 3.52 2.82 are designed to perform -019 4.10 11/64 3-1/4 -011 1.73 1.38 13/32 5-1/4 -026 7.18 5.74 19/64 4-3/8 3.28 in a wide variety of 3/16 3-1/2 -012 1.93 1.54 27/64 5-3/8 -027 7.95 6.36 5/16 4-1/2 -020 4.50 3.60 normal conditions. 13/64 3-5/8 -013 2.14 1.71 7/16 5-1/2 -028 8.35 6.68 21/64 4-5/8 -021 5.02 4.02 Jobbers length also 7/32 3-3/4 -014 2.35 1.88 29/64 5-5/8 -029 9.33 7.46 11/32 4-3/4 -022 5.51 4.41 15/64 3-7/8 -015 2.56 2.05 15/32 5-3/4 -030 9.85 7.88 23/64 4-7/8 -023 6.30 5.04 perform in a broad range of materials 1/4 4 -016 2.68 2.14 31/64 5-7/8 -031 10.43 8.34 3/8 5 -024 6.39 5.11 17/64 4-1/8 -017 3.26 2.61 1/2 6 -032 10.36 8.29 25/64 5-1/8 -025 7.42 5.94 in both machine 9/32 4-1/4 -018 3.36 2.69 13/32 5-1/4 -026 7.60 6.08 and portable drilling. 27/64 5-3/8 -027 8.40 6.72 Superhard TITANIUM 7/16 5-1/2 -028 8.77 7.02 NITRIDE (TiN) surface 29/64 5-5/8 -029 9.75 7.80 treatment improves drill 15/32 5-3/4 -030 10.40 8.32 life, chip ejection, and 3-in-1 118° POINT 31/64 5-7/8 -031 10.90 8.72 productivity; decreases 1/2 6 -032 10.92 8.74 horsepower requirements. Combination RIGHT HAND Jobbers HIGH SPEED STEEL Drill Set

Drill Designed to perform Indexes in a wide variety of normal conditions and in a broad range of materials in both machine and portable drilling. FEATURES: • Folding drill holder. 1/16" to 1/2" by 64ths, • All-steel index securely No. 1 to No. 60 and A to Z holds drills by the shank (except taper shank drills). Part No. 1-001-0115 • Greater accessibility. Reg. Net Price $72.60 • High quality epoxy finish. • Silk screened drill identification $ 08 for easy picking of drills. 58

Huot Part No. Reg. No. Description 1-030- Net Price SALE! JOBBERS LENGTH DRILLS Jobbers 4011 1 to 6mm by 0.5mm -4011 $8.00 $4.00 Drill Sets SCREW MACHINE DRILLS 2026 Drill Index A to Z -2026 20.00 10.00 2060 Drill Index No. 1 to No. 60 -2060 20.00 10.00 Jobbers length drills TAPER LENGTH DRILLS are designed to perform 326 A to Z -0326 30.00 15.00 in a wide variety of normal 360 No. 1 to No. 60 -0360 49.00 24.50 conditions and in a broad range of materials in both machine and portable drilling.

# Pieces Part No. Reg. 6" Silver & FEATURES: In Set Sizes 1-001AX- Net Price SALE! • Expands the size Deming Drills 29 1/16" - 1/2" by 64ths -0290 $103.12 $77.34 118° POINT range capacity of a 1/2" 26 A to Z -0260 101.02 75.77 118° POINT portable drill . 60 #1 thru #60 -0600 91.80 68.85 RIGHT HAND 1/2" SHANK • Common flute and overall length for 115 1/16" - 1/2" by 64ths -0115 309.60 232.20 HIGH SPEED HIGH SPEED STEEL minimal adjustment #1 thru #60 & A to Z STEEL Part No. Reg. during tool changes. Size 1-060- Net Price NOW! • Precision ground for a high degree of 9/16" -036 $6.76 $5.75 5/8 -040 7.64 6.49 concentricity between 3 Pc. TiN Coated 11/16 -044 8.49 7.22 shank and body diameter. 3/4 -048 9.28 7.89 • Ideal for drilling in low Step Drill Set 7/8 -056 11.02 9.37 and medium tensile strength materials. 15/16 -060 12.37 10.51 FEATURES: 1 -100 14.44 12.27 1-1/16 -104 16.93 14.39 • Creates perfectly round holes in metal, 1-1/8 -108 19.32 16.42 plastic, wood, and other thin materials. 1-3/16 -112 21.17 17.99 • Designed to deburr as you go. 1-1/4 -116 23.40 19.89 • Tip does not slide, absolutely 1-5/16 -120 28.06 23.85 no need for a center . 1-3/8 -124 29.91 25.42 • Easily sharpened. 1-7/16 -128 33.30 28.31 1-1/2 -132 35.17 29.89 Part No. 5-331-3682 Reg. Net Price $23.80 8 Pc. Silver & Deming Drill Set $ 66 9/16" to 1" by 16ths 16 Part No. 1-060-200 $ 41 RANGES OF BITS: 1/8-1/2", 3/16-1/2", 1/4-3/4". Reg. Net Price $72.25 61

4 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com CUTTING TOOLS 4 Pc. ZErO Flute 5 Pc. Single Flute M35 Cobalt Set 82O & Deburring Tool Set ANGLE FEATURES: 82O ANGLE STRAIGHT SHANK • Recommended for portable & machine work when operated CNC PRECISION CHATTERLESS at comparatively high speed. CAM GROUND CUTTING ACTION • Countersink holes much smaller than FEATURES: multi-flute tools. • M35 cobalt; 6% tungsten, 5% moly, 5% cobalt - for long life in all types of materials. SET INCLUDES: • Through-hole design that is easy to resharpen • 1/4", 3/8" 1/2" using a small in the cross-hole. with 1/4" shank. • Simple all-purpose versatility that provides • 3/4", 1" with 1/2" shank. flawless countersinking and deburring. • Chamfer diameters ranging from 7/64" to 1-1/32". Supplied in Part No. 5-380-5895 • Free cutting action. Minimal power a plastic case. Reg. Net Price $37.90 needed. Use by hand or machine feed. • Works on all materials. Excels on aluminum, SIZES INCLUDED: 5/16", 3/8", 1/2", 5/8" $ 32 plastics, and other nonmetallics. • Micro-smooth CNC precision ground for Part No. 1-159A-53518 $ 70 30 clean smooth cutting without smearing. Reg. Net Price $76.12 64 Supplied in a wood block.

Solid Carbide Combined 6-Flute Double Drills & Countersinks End Countersinks Plain type, solid carbide, 60° combined drills and countersinks with straight flutes. Used for producing center holes in components or workpieces which require HIGH machining between centers. SPEED 60° 82° 90° Body Drill Part No. Reg. STEEL Body Part No. Part No. Part No. Reg. Size Dia. Dia. 1-049- Net Price SALE! Dia. OAL 1-1646H- 1-1646H- 1-1646H- Net Price NOW! 60° INCLUDED 1 1/8" 3/64" -001 $9.18 $7.34 Two cutting 1/8" 1-1/2" -60008 -82008 -90008 $15.70 $14.13 ANGLE 2 3/16 5/64 -002 12.00 9.60 ends give 3/16 2 -60012 -82012 -90012 16.05 14.45 3 1/4 7/64 -003 15.00 12.00 1/4 2 -60016 -82016 -90016 16.65 14.99 FINE GRAIN you twice 4 5/16 1/8 -004 21.00 16.80 the tool life 5/16 2-1/2 -60020 -82020 -90020 19.30 17.37 6% COBALT 5 7/16 3/16 -005 31.00 24.80 3/8 2-1/2 -60024 -82024 -90024 21.50 19.35 C-2 GRADE of a single 6 1/2 7/32 -006 42.00 33.60 end tool. 1/2 3 -60032 -82032 -90032 26.95 24.26

Solid Carbide Hi-Roc Drills 8 Pc. Solid Carbide Designed to drill hardened steel with 1/4" Shanks in the 42-65 Rockwell "C" range. Kit Standard Plain Cut: General purpose cut, where Series 200 stock removal rates & finish requirements are average. Flute Part No. Reg. Performs best on soft Size Dia. Length OAL 5-100- Net Price NOW! ferrous materials. 1/32" .0312" 3/16" 1-1/2" -20004 $16.49 $13.19 135° POINT 3/64 .0469 1/4 1-1/2 -20067 14.55 11.64 KIT INCLUDES (1 Ea.): 1/16 .0625 5/16 1-1/2 -20100 14.55 11.64 FINE GRAIN 5/64 .0781 3/8 1-1/2 -20130 14.55 11.64 • SD1 Ball - 1/4" 6% COBALT • SE1 Oval - 1/4" x 3/8" 3/32 .0938 1/2 1-1/2 -20163 14.55 11.64 C-2 GRADE 7/64 .1094 5/8 1-1/2 -20199 17.06 13.65 • SM1 Cone - 1/4" x 1/2" 1/8 .1250 5/8 1-1/2 -20229 17.55 14.04 • SN1 Inverted - 1/4" x 5/16" 9/64 .1406 5/8 2 -20253 18.85 15.08 FEATURES: • SA1 Cylindrical - 1/4" x 5/8" 5/32 .1562 5/8 2 -20283 21.93 17.54 • Produces chips • SC1 Radial End - 1/4" x 5/8" Part No. 1-338-000 11/64 .1719 5/8 2 -20313 23.42 18.74 without generating • SF1 Tree, Radius End - 1/4" x 5/8" Reg. Net Price $79.90 3/16 .1875 5/8 2 -20340 25.38 20.30 excessive heat. • SG1 Tree, Pointed End - 1/4" x 5/8" 13/64 .2031 3/4 2 -20376 27.13 21.70 • Both a production 7/32 .2187 3/4 2 -20403 28.51 22.81 drill and a salvage Supplied in a wood box. $ 92 15/64 .2344 3/4 2 -20427 29.65 23.72 or reclaim tool. 63 1/4 .2500 3/4 2 -20451 35.42 28.34 • Accurately sized 17/64 .2656 3/4 2-1/2 -20472 38.35 30.68 holes are produced 9/32 .2812 3/4 2-1/2 -20499 40.75 32.60 without annealing 19/64 .2969 3/4 2-1/2 -20520 42.67 34.14 5/16 .3125 3/4 2-1/2 -20541 44.30 35.44 or softening the 21/64 .3281 1 2-1/2 -20562 49.95 39.96 workpiece. 11/32 .3438 1 2-1/2 -20583 51.80 41.44 • type 23/64 .3594 1 2-1/2 -20604 53.52 42.82 finishes are 3/8 .3750 1 2-1/2 -20622 55.02 44.02 easily produced.

Solid Carbide No. 10 Hi-Roc Drill Sets Standard SETS INCLUDE: A selection of more frequently used, fractional Keyway Broach size drills and comes packed neatly in a plastic case. Set - 1/8" to 3/8" Keyway Broach Bushing Dia. Part No. HIGH No. of Part No. Reg. SPEED STEEL Drills Sizes 5-100- Net Price SALE! Sizes Style (Hole Size) 1-409-11104 1/8" B 1/2", 5/8", 3/4", 7/8" 5 1/8" to 3/8" by 16ths -20181 $178.80 $143.04 Reg. Net 3/16 B Price $431.60 7 1/16" to 1/4" by 32nds -20367 156.90 125.52 1/4 C 1", 1-1/8", 1-1/4", $ 86 10 3/64" to 3/16" by 64ths -20526 182.23 145.78 3/8 C 1-3/8", 1-1/2" 366

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 5 CUTTING TOOLS MICROSHIELD™ TiN - : Standard Length A general purpose coating for Solid Carbide, HSS and TiN Coated Solid HSCO end mills that provides effective protection against wear, abrasion and edge buildup. Primary applications Carbide Single are milling steels in a non-hardened condition. End Mills 3 FLUTE Designed for general milling 2 Flute 3 Flute 4 Flute operations. Spiral multi-flute Flute Shank Flute Part No. Reg. Part No. Reg. Part No. Reg. design permits a faster Dia. Dia. Length OAL 1-325C- Net Price NOW! 1-330C- Net Price NOW! 1-326C- Net Price NOW! and smoother cutting action. 1/16" 1/8" 3/16" 1-1/2" -004 $6.70 $5.70 -004 $8.80 $7.48 -004 $6.70 $5.70 1/8 1/8 1/2 1-1/2 -008 7.00 5.95 -008 8.80 7.48 -008 7.00 5.95 3/16 3/16 5/8 2 -012 10.69 9.09 -012 9.90 8.42 -012 10.69 9.09 1/4 1/4 3/4 2-1/2 -016 13.50 11.48 -016 12.50 10.63 -016 13.50 11.48 5/16 5/16 7/8 2-1/2 -020 16.42 13.96 -020 16.60 14.11 -020 16.42 13.96 3/8 3/8 7/8 2-1/2 -024 21.00 17.85 -024 20.00 17.00 -024 21.00 17.85 7/16 7/16 1 2-1/2 -028 32.40 27.54 -028 30.00 25.50 -028 32.40 27.54 2 FLUTE 1/2 1/2 1 3 -032 33.00 28.05 -032 33.00 28.05 -032 33.00 28.05

4 Flute Corner Rounding Miniature End Mills Double Relieved form can be resharpened many times without changing forms. Used in milling rounded corners. With 3/16" Shank FRACTIONAL RADIUS

Designed for Shank Cutter End No. of Part No. Reg. RADIUS general purpose Radius Dia. Dia. Diameter OAL Teeth 5-550A- Net Price SALE! milling operations. SPECIAL BUY! 1/8" 1/2" 5/8" 1/4" 3" 4 -14220 $63.18 $53.70 CUTTER END DIAMETER DIAMETER Quantities Limited. 5/32 1/2 1/2 5/16 3 4 -14230 69.16 58.79 HIGH SPEED STEEL 3/16 1/2 3/4 3/8 2-15/16 4 -14240 78.32 66.57 3/16 3/4 7/8 3/8 3-1/8 4 -14250 78.32 66.57 SPECIFICATIONS: 1/4 1/2 1 3/8 3 4 -14260 87.34 74.24 WORKPIECE 1/4 3/4 1 3/8 3-1/4 4 -14270 87.34 74.24 • Mill Diameter: 1/8" 5/16 1/2 1-1/8 3/8 3-1/4 4 -14280 107.05 90.99 HIGH SPEED STEEL • Flute Length: 3/8" 5/16 7/8 1-1/8 3/8 3-1/2 4 -14290 107.05 90.99 • OAL: 2-1/4" 3/8 1/2 1-1/4 3/8 3-1/2 4 -14300 121.84 103.56 3/8 7/8 1-1/4 3/8 3-3/4 4 -14310 121.84 103.56 Part No. 5-265-010 $ 94 7/16 3/4 1-3/8 3/8 3-3/4 4 -14320 134.41 114.25 Reg. Net Price $7.75 1 7/16 1 1-1/2 3/8 4 4 -14330 134.41 114.25 1/2 3/4 1-1/2 3/8 3-7/8 4 -14340 142.72 121.31 1/2 1 1-1/2 3/8 4-1/8 4 -14350 142.72 121.31

8 Pc. Adjustable Hex Shank Taper Hand Reamer Car Set SPIRAL FLUTE FEATURES: • Reamers are used for HIGH SPEED light cut, repair work, STEEL removing stock, or Flute Part No. Reg. for enlarging holes. Size Length 5-056X- Net Price SALE! • Can be hand operated Taper Car Reamers have the same features as bridge 11/16" 5" -051 $59.70 $41.79 by use of . reamers except for shorter flute and overall length facilitating 13/16 5 -052 65.30 45.71 • Each reamer adjusts from their use in tight quarters. Hex Nut welded to shank for ready 15/16 5 -060 74.75 52.33 a smaller size to a larger size. use in pneumatic power tools. 1-1/16 5 -104 90.90 63.63

HIGH SPEED Supplied in a STEEL Solid Carbide fitted wood case. 15/32" to 1-1/16" Reamers Part No. 1-135-800 4 Flute STRAIGHT SHANK STRAIGHT FLUTE Reg. Net Below 1/4" Dia., 6 Flute Decimal. Flute Part No. Reg. Price $130.20 On Larger Sizes Size Equiv. Length OAL 5-661- Net Price SALE! 1/16" .0625" 3/8" 1-1/2" -018 $11.55 $9.82 $ 12 1/8 .1250 5/8 2-1/4 -044 15.70 13.35 78 For general purpose reaming 3/16 .1875 7/8 2-3/4 -066 21.10 17.94 applications in ferrous metals 1/4 .2500 1 3 -087 28.10 23.89 and most non-ferrous materials. 5/16 .3125 1-1/8 3-1/4SA-100VEto37.80 32.13 Precision ground with straight 3/8 .3750 1-1/4 3-1/2 -111up 45.35 38.55 flutes for making smooth, accurate 7/16 .4375 1-3/8 3-3/4 -117 58.90 50.07 holes while retaining long tool life. 1/2 .5000 1-3/8 4 -121 73.55 62.52

29 Pc. Chucking SAVEover Reamer Set $40 FRACTIONAL SIZES M-2 HIGH SPEED STEEL STRAIGHT SHANK STRAIGHT FLUTE 1/16" to 1/2" by 64ths FEATURES: Diameter Tolerances: +.0002" -.0000" • Designed for use in turret , Part No.SA 5-015-375VE screw machines, drill presses and Reg. Net Price $267.91 all types of equipment. • Ground with a 45O chamfer they are suitable for $ 72 reaming most materials ordinarily encountered. 227

6 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com CUTTING TOOLS FEATURES: E-Z LOK thread inserts are an easy way to replace or prevent worn • Install with standard tools. threads. They install with standard tools... no special drills or taps needed. • Self locking. Simply drill the hole with a standard drill, tap the hole with a standard Thread • Carbon steel designs. tap, then turn in the EZ-LOK with screwdriver or bolt/nut. A preapplied Inserts • Registered to ISO 9001:2000. anaerobic adhesive on external threads locks the inserts in place. INCH REPAIR KITS METRIC REPAIR KITS Reg. Qty. of Internal External Part No. Net Price Reg. Desc. Inserts Thread Thread 1-842- Per Kit SALE! Qty. of Internal External Part No. Net Price Desc. Inserts Thread Thread 1-842- Per Kit SALE! Coarse 10 10-24 3/8-16 Thread 10 1/4-20 7/16-14 Metric 10 M6-1.0 3/8-16 No.10 10 5/16-18 1/2-13 -023 $88.35 $75.10 Thread 10 M8-1.25 1/2-13 to 1/2" 10 3/8-16 9/16-12 M6 10 M10-1.5 9/16-12 -041 $88.35 $75.10 6 1/2-13 3/4-10 to M12 6 M12-1.75 3/4-10 Coarse 6 1/2-13 3/4-10 10 M3-0.5 M6-1.0 Thread 7 5/8-11 7/8-9 M3-0.5 10 M4-0.7 M8-1.25 1/2" 7 3/4-10 1-8 -024 93.92 79.83 to 10 M5-0.8 M8-1.25 -042 121.60 103.36 to 1" 2 1-8 1-3/8-12 M8-1.25 10 M6-1.0 M10-1.5 10 10-32 3/8-16 10 M8-1.25 M12-1.75 Fine 10 1/4-28 7/16-14 10 M8-1.25 M12-1.75 Thread 10 5/16-24 1/2-13 -025 85.75 72.89 M8-1.25 10 M10-1.5 M16-2.0 No. 10 10 3/8-24 9/16-12 to 8 M12-1.75 M16-2.0 -043 139.10 118.24 to 1/2" 6 1/2-20 3/4-10 M16-2.0 5 M16-2.0 M24-3.0

Annular HIGH SPEED STEEL SHORT SERIES (1" DEPTH) Style AL & AR Cutters 3/4" SHANK Carbide Tipped Toolbits FEATURES: STRAIGHT TURNING TOOLS • Eliminates multi-step drilling. • More accurate & clear holes. GRADE C-5 • Better finishing. Designed for turning, boring or to a square shoulder. Part No. Reg. Part No. Reg. Maximum regrinds are possible Size 5-530- Net Price NOW! Size 5-530- Net Price NOW! for light cutting where the maximum wear occurs at or near the front face of the tool. 1/2" -111 $30.07 $25.56 1-5/16" -148 $54.33 $46.18 9/16 -113 30.07 25.56 1-3/8 -151 60.14 51.12 5/8 -116 30.07 25.56 1-7/16 -154 65.96 56.07 Shank Dimensions Left Hand Right Hand 11/16 -119 30.07 25.56 1-1/2 -157 71.78 61.01 Nose Part No. Reg. Part No. Reg. 3/4 -121 32.02 27.22 1-9/16 -160 75.67 64.32 Square Length Radius 1-2445- Net Price SALE! 1-2445- Net Price SALE! 13/16 -124 35.30 30.01 1-5/8 -163 77.61 65.97 7/8 -127 35.90 30.52 1-11/16 -166 87.31 74.21 1/4" 2" 1/64" -AL4 $4.73 $3.78 -AR4 $4.73 $3.78 5/16 2-1/4 1/64 -AL5 5.30 4.24 -AR5 5.30 4.24 15/16 -130 38.04 32.33 1-3/4 -169 89.25 75.86 3/8 2-1/2 1/64 -AL6 5.53 4.42 -AR6 5.53 4.42 1 -133 40.36 34.31 1-13/16 -172 100.89 85.76 1-1/16 -136 42.68 36.28 1-7/8 -175 100.89 85.76 7/16 3 1/32 -AL7 5.78 4.62 -AR7 5.78 4.62 1-1/8 -139 46.57 39.58 1-15/16 -178 104.77 89.05 1/2 3-1/2 1/32 -AL8 7.40 5.92 -AR8 7.40 5.92 1-3/16 -142 48.50 41.23 2 -181 112.52 95.64 5/8 4 1/32 -AL10 10.53 8.42 -AR10 10.53 8.42 1-1/4 -145 49.47 42.05

KIT INCLUDES: 13 Pc. Deep Cut • DCH Series Hole - 3/4", 7/8", Bi-Metal General 1-1/8", 1-3/8", 1-1/2", 1-3/4", 2", 2-1/4", 2-1/2". • A1E Extended Length Arbor. Purpose Hole Kit • A2E Extended Length Quick Hitch Arbor. • A014CE Extra-Length HSS Pilot Drill. FEATURES: • A12 Arbor Adapter. • Allows cutting through a depth of 2". • Exceptionally strong, safe, and shatter resistant. Starrett #KDC09051-N • Cuts a wide variety of materials including wood, metal, and steel. Part No. 1-856-01218 • Manufactured with hardened heat resistant and positive rake high $ 11 speed steel teeth welded to a durable alloy backing and cap. Reg. Net Price $134.25 114

Spiral Pointed Hand Taps FEATURES: • Commonly referred to as "gun" taps. HIGH SPEED STEEL 4 Flute Plug • Excellent production PLUG STYLE GROUND THREAD tapping of through holes. GROUND THREAD Hand Taps GH LIMIT - H3 • Flute design forces the evacuation of chips ahead of the cutting action. RIGHT HAND HIGH SPEED STEEL FEATURES: MACHINE SCREW SIZES • General purpose taps. RIGHT HAND GH No. of Part No. Reg. • Widely used in through Size Limit Flutes 1-351- Net Price SALE! holes and where there is sufficient 4-40 NC H2 2 -1010805 $8.23 $7.00 room at the bottom in blind holes. 6-32 NC H3 2 -1012361 6.91 5.87 • Most common style of hand taps. 8-32 NC H3 2 -1012370 6.91 5.87 10-24 NC H3 2 -1012378 6.91 5.87 10-32 NF H3 2 -1012383 6.91 5.87 FRACTIONAL SIZES FRACTIONAL SIZES Part No. Reg. NOW! GH No. of Part No. Reg. Size 1-351- Net Price SALE! 1/4-20 NC -1010006 $5.99 $5.09 Size Limit Flutes 1-351- Net Price 1/4-28 NF -1010017 5.99 5.09 1/4-20 NC H3 2 -1010292 $6.88 $5.85 5/16-18 NC -1010028 7.28 6.19 1/4-28 NF H3 2 -1010299 6.91 5.87 5/16-24 NF -1010039 7.28 6.19 5/16-18 NC H3 2 -1010306 7.44 6.32 3/8-16 NC -1010050 8.28 7.04 5/16-24 NF H3 2 -1010313 7.44 6.32 3/8-24 NF -1010061 8.28 7.04 3/8-16 NC H3 3 -1010320 8.75 7.44 1/2-13 NC -1010088 14.79 12.57 3/8-24 NF H3 3 -1010324 9.43 8.02 1/2-20 NF -1010097 17.01 14.46 1/2-13 NC H3 3 -1010336 15.28 12.99 5/8-11 NC -1010121 30.14 25.62 1/2-20 NF H3 3 -1010340 17.83 15.16 5/8-18 NF -1010128 30.14 25.62 5/8-11 NC H3 3 -1010342 34.34 29.19 3/4-10 NC -1010142 42.53 36.15 5/8-18 NF H3 3 -1012774 34.34 29.19 3/4-16 NF -1010149 42.53 36.15 3/4-10 NC H3 3 -1010344 48.30 41.06

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 7 CARBIDE TOOLING External Threading

2o Toolholders Internal Toolholders H1 H RIGHT HAND SHOWN INCLUDES COOLANT PORT.

F B

L2 L1 2o All toolholders are supplied H1 H with 1-1/2° helix-angle. Supplied with . PLEASE NOTE THAT ALL INTERNAL BARS USE OPPOSITE HAND INSERTS. EXAMPLE: RIGHT HAND BARS USE LEFT HAND INSERTS F Insert B AND LEFT HAND BARS USE RIGHT HAND INSERTS. Size H, H1 Part No. Reg. Model No.L2 (I.C.) B F L1 L2 1-289R- Net Price SALE! Industry Min. Part No. Reg. Ref. No. Shank OAL Bore Insert 1-294- Net Price NOW! AL 3/8-3 L1 .37" .63" 2.5" .81" -085 $75.75 $64.39 AL 050-3 3/8" .50 .63 3.5 .87 -005 82.60 70.21 A10-FLER/L2 5/8" 10" 1.000 FL-2 -007R $139.54 $125.59 AL 0625-3 .63 .63 5.0 1.02 -006 82.60 70.21 A12-FLER/L2 3/4 10 1.125 FL-2 -008R 169.66 152.69 AL 075-3 .75 .75 5.0 1.02 -010 82.60 70.21 A16-FLER/L3 1 12 1.375 FL-3 -009R 221.30 199.17 AL 100-3 3/8" 1.00 1.00 6.0 1.02 -015 86.76 73.75 A20-FLER/L3 1-1/4 14 1.750 FL-3 -010R 235.62 212.06 AL 125-3 1.25 1.25 7.0 1.18 -020 96.40 81.94 A28-FLER/L4 1-3/4 16 2.250 FL-4 -011R 304.46 274.01

External Right Hand CCMT Carbide 60o PARTIAL Inserts Threading Inserts PROFILE o (NON-TOPPING) 80 DIAMOND The "Partial Profile" inserts cut FEATURES: • Depth of Cut: without "Topping" the O.D. of the thread. • Single sided. 3/64" ~ 1/8". The same insert can be used for a range • Screw on insert. • Feed Rate: of different thread pitches. • Standard chip control. .004" ~ .012"/rev. • Use for medium cuts. • 7° relief angle. VKX - TiN coated carbide grade. Excellent for & cast iron. GRADE TG-320 - Excellent coated grade for general VSX - All purpose carbide grade. purpose cuts in steel & steel alloys. Equivalent to P10-P30 Coated for extra tool life. grade. Recommended cutting speed 500-1,000 SFM. Able to withstand difficult cutting conditions.

Pitch Range VKX Grade VSX Grade ASA Insert Hole Corner Part No. Reg. Code IC Size Dia. Thickness Radius 1-2443- Net Price SALE! Part No. Reg. Part No. Reg. I.C. TPI MM 1-2892- Net Price SALE! 1-2892- Net Price NOW! CCMT-21.51 1/4" .110" 3/32" 1/64" -931 $9.25 $6.94 CCMT-32.51 3/8 .173 5/32 1/64 -932 9.50 7.13 3/8A 16 - 48 0.5 - 1.5 -510-VKX $19.31 $16.41 -510-VSX $19.31 $16.41 CCMT-32.52 3/8 .173 5/32 1/32 -933 9.50 7.13 3/8G 8 - 14 1.75 - 3.0 -515-VKX 19.31 16.41 -515-VSX 19.31 16.41 CCMT-431 1/2 .216 3/16 1/64 -934 12.60 9.45 3/8AG 8 - 48 0.5 - 3.0 -520-VKX 19.31 16.41 -520-VSX 19.31 16.41 CCMT-432 1/2 .216 3/16 1/32 -923 12.60 9.45

Perform Line Turning Inserts MADE IN GERMANY FEATURES: • Indexable inserts for turning application in ISO P. Buy In Package Quantity: 10 Per Pack. • For general mechanical engineering, single-part production and other industries. RECOMMENDED APPLICATIONS • Economic machining with proven technology. Grade Use • Extremely reliable and wear-resistant. • Simple geometry selection and wear detection. WPV10 For non-alloyed steel, low-alloyed steel, high-alloyed steel and tool steel, • Flexible use in a wide range of applications. and stainless steel. Harder application range 10. Cutting Speed: 260-1,120 SFM. WPV20 For non-alloyed steel, low-alloyed steel, high-alloyed steel and tool steel, and stainless steel. Tougher application range 20. Cutting Speed: 230-920 SFM.

Grade WPV10 Grade WPV20 Reg. ANSI Insert Hole Corner Part No. Part No. Net Price Code IC Size Dia. Thickness Radius 1-247- 1-246- Each SALE! TCMG TCMT CNMG CCMT CCMT21.51-FV4 1/4" .110" 3/32" 1/64" -058 -058 $6.28 $4.71 TRIANGULAR TRIANGULAR 80° DIAMOND 80° DIAMOND CCMT32.51-FV4 3/8 .173 5/32 1/64 -059 -059 7.32 5.49 CCMT32.52-FV4 3/8 .173 5/32 1/32 -060 -060 7.32 5.49 CCMT21.51-MV4 1/4 .110 3/32 1/64 -061 -061 6.28 4.71 CHIPBREAKERS CCMT32.51-MV4 3/8 .173 5/32 1/64 -062 -062 7.32 5.49 CCMT32.52-MV4 3/8 .173 5/32 1/32 -063 -063 7.32 5.49 Negative Basic Inserts CCMT432-MV4 1/2 .203 3/16 1/32 -064 -064 10.48 7.86 • Double-sided negative basic shape. CNMG431-FV5 1/2 .203 3/16 1/64 -001 -001 8.58 6.44 • Feed/Chip Breaking Range: 5. CNMG432-FV5 1/2 .203 3/16 1/32 -002 -002 8.58 6.44 CNMG431-MV5 1/2 .203 3/16 1/64 -003 -003 8.58 6.44 FV5 • For finishing or semi-finishing of steel materials. CNMG432-MV5 1/2 .203 3/16 1/32 -004 -004 8.58 6.44 • Medium machining of a wide range of applications. CNMG433-MV5 1/2 .203 3/16 3/64 -005 -005 8.58 6.44 MV5 • Universal geometry for cast iron workpieces. CNMG543-MV5 5/8 .253 1/4 3/64 -006 -006 13.68 10.26 CNMG431-RV5 1/2 .203 3/16 1/64 -013 -013 8.58 6.44 RV5 • For roughing of steel materials and ductile cast iron. CNMG432-RV5 1/2 .203 3/16 1/32 -014 -014 8.58 6.44 CNMG433-RV5 1/2 .203 3/16 3/64 -015 -015 13.68 10.26 Positive Basic Inserts CNMG543-RV5 5/8 .253 1/4 3/64 -016 -016 13.68 10.26 • Single-sided positive basic shape. TCMT21.51-MV4 1/4 .110 3/32 1/64 -071 -071 6.94 5.21 TCMT32.51-MV4 3/8 .173 5/32 1/64 -072 -072 9.04 6.78 • Feed/Chip Breaking Range: 4. TCMT32.52-MV4 3/8 .173 5/32 1/32 -073 -073 9.04 6.78 • Universal finishing insert with excellent chip control. TNMG331-MV5 3/8 .150 3/16 1/64 -040 -040 7.56 5.67 FV4 • Can also be used for fine boring. TNMG332-MV5 3/8 .150 3/16 1/32 -041 -041 7.56 5.67 TNMG331-FV5 3/8 .150 3/16 1/64 -038 -038 7.56 5.67 • Medium machining of long-chipped materials. TNMG332-FV5 3/8 .150 3/16 1/32 -039 -039 7.56 5.67 MV4 • Can be used in a wide range of applications. TNMG332-RV5 3/8 .150 3/16 1/32 -044 -044 7.56 5.67

8 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com CARBIDE TOOLING ® ® Freedom Cutter The Mil-Tec Freedom Cutter is perfect for every shop. Fits three different shapes The combination of flexibility and performance offers of inserts. Square, Round, Indexable Shell Mills users a low cost milling solution without sacrificing quality. and Octagon, all in one body! FEATURES: • Positive geometry for free cutting. KITS FOR ALUMINUM APPLICATIONS • Separate geometry (INCLUDES SS45L-MTC322 INSERTS) TOOL DIMENSIONS: KITS INCLUDE: for aluminum and steel. Include Part No. Reg. # of • (1) Mil-Tec Freedom Kit No. Tool No. 1-265- Net Price SALE! Tool No. Dia. Bore Height Inserts Cutter Body • (10) Inserts KTFC-2-4SS FC-2-4 -035A $338.00 $304.20 FC-2-4 2" 0.75" 1.750" 4 KTFC-3-5SS FC-3-5 -040A 455.00 409.50 FC-3-5 3 1.25 1.875 5 • (2) Wrenches KTFC-4-6SS FC-4-6 -045A 552.00 496.80 FC-4-6 4 1.50 1.875 6 • Extra Screws NP • Anti-Seize Lubricant Negative / Positive Frustroconical Land SmoothGrind® GRADE SELECTIONS: PS Freedom Power ® Cutting Medium Dish Cutter MTC No. Coating Edge Application SmoothGrind® Inserts MTC-20 Uncoated Up Sharp Aluminum SS MTC-322 TiB2 Edge Prep Aluminum Super Shear High Dish SmoothGrind® SUPER SHEAR INSERTS Uncoated (MTC-20) Coated (MTC-322) Insert Part No. Reg. Part No. Reg. No. Shape 1-2655- Net Price SALE! 1-2658- Net Price SALE! SS-45L Octagon -035 $14.50 $13.05 -035 $15.50 $13.95 SS-032 Square -040 14.50 13.05 -040 15.50 13.95 SS-312 Round -045 14.50 13.05 -045 15.50 13.95

Indexable 2" Diameter Recyclable 15° Face Mill CUTTING RAKE - NEGATIVE 7°: For negative 80° diamond CNMG inserts. FEATURES: • Recycles negative inserts, 80° diamond. • Index insert with four cutting edges. • High rate of material removal. • Torx screw (TS-1032-5M1) locking system. • Number of Inserts: 3. • Insert: CNMG-432. • Torx : T-20.

TOOL ANGLES: Cutting Rake 7° Axial Rake 7° Radial Rake 7°

After the cutting edges are used on your turning toolholder, do not throw the insert away. It can be used in this milling cutter to utilize two more cutting edges that were not used in your work.

Part No. Reg. Tool Number C D D1 d F H 1-286A- Net Price NOW! MTJNR Indexable REC15-200-CN4-075 3-1/4" 2" 2-1/4" 3/4" .45" 1-1/2" -080 $222.37 $189.01 REC15-200-CN4-100 4 2 2-1/4 1 .45 1-1/2 -085 222.37 189.01 Toolholders REC15-200-CN4-R8 5-5/8 2 2-1/4 R8 .45 1-3/4 -090 280.58 238.49 FEATURES: • For use with 60° triangular negative clearance TNMG inserts. • 3° side cutting edge angle. For use with TNMG SI-CTUP R Style Inserts H H Indexable 1 MTJNR/L Boring Bars FEATURES: For use with B • Positive 3O end cutting edge angle. F MTJNR/L • For use with triangle TPU inserts. TPU A Style Inserts • Right hand. 93˚ RIGHT HAND SHOWN E LEFT HAND OPPOSITE L

D d Right Hand Shown, Left Hand Opposite TNMG F o 90 Tool Width Height Length Insert Part No. Reg. Style B H L F Series 6-740R- Net Price SALE! A E MTJNR 10-3B 5/8" 5/8" 4-1/2" .675" -010 $69.24 $58.85 MTJNR 12-3B 3/4 3/4 4-1/2 1 33 -012 77.36 65.76 L MTJNR 16-3D 1 1 6 1-1/4 -016 83.88 71.30 MTJNR 16-4D 1 1 6 1-1/4 -116 85.70 72.85 Shank Min. OAL Part No. Reg. MTJNR 20-4D 1-1/4 1-1/4 6 1-1/4 43 -120 93.77 79.70 Size Bore L E Inserts 6-939- Net Price SALE! MTJNR 16-5D 1 1 6 1-1/4 -216 90.92 77.28 5/8" 0.827" 8-1/4" 1.181" TPU-21 -172 $81.96 $69.67 MTJNR 20-5D 1-1/4 1-1/4 6 1-1/2 -220 96.99 82.44 MTJNR 24-5D 1-1/2 1-1/2 6 2 -224 124.36 105.71 3/4 1.063 9-7/8 1.378 -173 86.31 73.36 54 TPU-32 MTJNR 24-5E 1-1/2 1-1/2 7 2 -226 141.34 120.14 1 1.339 11-3/4 1.575 -174 94.38 80.22 MTJNR 85-3E 1 1-1/2 7 1-1/4 -235 96.15 81.73

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 9 WORK HOLDING Plain Bearing Key-Type Chucks

The Jacobs® Plain Bearing chuck is the world’s most widely used for medium or heavy duty portable bench or floor mounted power tools. This industrial quality chuck, with fully hardened and ground working components, offers exceptionally high accuracy, gripping power and durability. Both heavy and medium duty models are available in a wide range of capacities for use on threaded and taper mounted spindles.

0 - 1/2" CAPACITY Chuck Chuck Uses Sleeve Part No. Reg. Model Mount Key Finish 1-508- Net Price SALE! 34-02 2JT K3 Fluted -14442 $126.00 $107.10 34-06 6JT K3 Fluted -6295 167.33 142.23 34-33 33JT K3 Fluted -14445 142.44 121.07 34-33C* 33JT K3 Smooth -14451 131.61 111.87 * Equipped with Thread Locking Collar 1-1/16 - 20 Thread.

Heavy-Duty Ball Bearing Chucks Specially designed for extra heavy-duty drilling applications on production drilling machines, bore, milling machines, lathes and radials. The ideal choice for those jobs that require close tolerance drilling. The ball thrust bearing reduces friction in the chuck’s closing mechanism, so the operator can apply more gripping power on the twist drill shank.

Chuck Chuck Uses Part No. Reg. Model Capacity Mount Key 1-508- Net Price SALE! 11N 0 - 3/8" 2JT K32 -30215 $198.25 $148.69 14N 0 - 1/2 3JT K3 -30221 206.16 154.62 16N 1/8 - 5/8 3JT K4 -30227 318.12 238.59 Chuck Keys

Jacobs R8 Shank Drill Chuck Arbors Equivalent Part No. Make your power tools Key No. 1-507- NOW! useful again! Stock JACOBS TAPER K1 -002 $1.55 up on misplaced keys K2 -003 2.42 with these economy Chuck Part No. Reg. K3 -006 2.61 replacements! Taper Taper 1-507- Net Price SALE! K4 -007 8.10 R8 2JT -080 $17.25 $15.53 R8 3JT -135 17.25 15.53 R8 4JT -185 17.25 15.53 PRECISION R8 6JT -255 17.25 15.53 GROUND R8 33JT -305 17.25 15.53 Straight Shank Double Angle Chucks Supra Quick Action Ball Bearing Drill Chucks A FEATURES: • Rapid clamping and releasing of the • All metal construction drilling tools, without use of a wrench. for extended life. • Heavy industrial version for stationary drilling B C • Jaws and bodies are machines and lightweight version mainly for hardened & ground. hand operated drilling machines. Shank Shank Head Collet Dia. Length Length Part No. Reg. KEYLESS Size (A) (B) (C) 1-543- Net Price SALE! Size Taper Part No. Reg. Self-tightening DA100 1" 5-1/2" 1-13/16" -76545 $109.00 $98.10 Capacity Mount 1-507- Net Price SALE! for higher clamping DA180 1-1/4 5-17/32 1-3/4 -76547 129.00 116.10 0-3/8 2JT -020097 $96.00 $86.40 torque. High DA200 3/4 5-1/2 1-5/8 -76543 104.00 93.60 0-3/8 33JT -020101 90.60 81.54 percussion design. 1/32-1/2 6JT -020113 130.00 117.00 DA300 1/2 5-1/2 1-5/16 -76541 92.00 82.80 1/32-1/2 33JT -020109 129.00 116.10 1/8-5/8 6JT -020121 149.00 134.10 MADE IN GERMANY

6" x 12" Permanent Rectangular ® Magnetic Chucks Economy Grade Button Type FEATURES: Magnets • Standard pole type. • Positive hand release. Small but powerful magnets • Magnetic Pull - 88lbs/40kg. with almost unlimited applications. • Solid top and bottom plates Has a center hole for easy fastening. With keeper. assure retained accuracy. Pull Part No. Reg. • Approx. Weight: 33 lbs. Diameter Height (lbs.) 1-805- Net Price SALE! 1/2" 3/8" 1-1/2 -372A $4.40 $3.74 Part No. 3/4 1/2 4 -372B 6.30 5.36 9-600-612 1 5/8 6-1/4 -372C 8.25 7.01 1-1/4 3/4 14 -372D 19.45 16.53 Reg. Net $ 33 1-1/2 7/8 18-1/2 -372E 27.60 23.46 Price $355.10 266

10 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com WORK HOLDING 3-Jaw Universal Iron Body Chucks High Value & Lower Cost! Series 342 MEDIUM DUTY FEATURES: VALUE LINE • Maximum .003" TIR using nominating pinion. • .001" repeatability using nominating pinion. • Hardened scroll. • Three hardened pinions. • Semi-steel bodies.

PLAIN BACK with Two Piece Reversible Jaws Chuck Weight Part No. Reg. Dia. (lbs.) 1-495- Net Price SALE! 6" 25 -0600 $325.00 $276.25 8 34 -0800 425.00 361.25 10 55 -1000 525.00 446.25 1 Year Warranty!

CNC Lathe ER-32 Collet Chucks 43 Pc. CAT This ER collet chuck fits CNC lathes and can also be use 40 V-Flange for tapping applications. It seals coolant from the turret to Tooling Package the shank with an o-ring on the end of the shank. ER COLLET FEATURES: CHUCK FEATURES: • For coolant up to 1,500 PSI. • Factory balanced END MILL • Collet pocket T.I.R 0.0001". to 25,000 RPM. HOLDER FEATURES: • PowerCOAT nut included. • Collet precision .0002" . • Manufactured to H5 tolerance. • Power coat nut holds up to 75% • Lab tested and lab certified. SPECIFICATIONS: tighter than standard nuts to • Factory balanced Shank Diameter (C)...... 1-1/4" extend life. to 10,000 RPM. Part No. 7-520-04784 Gage Length (l2)...... 1.69" $ 80 Diameter (D)...... 1.97" Reg. Net Price $206.00 164

CAT 40 V-Flange ER Collet Chucks

FEATURES: • Maximum T.I.R. 0.0001" taper to collet pocket. SET INCLUDES: • Balanced to 25,000 RPM at G2.5 for high speed. Qty. Description • PowerCOAT included for 75% more clamping power. 4 CAT 40, ER 32 x 2.76" Collet Chuck 2 CAT 40, ER 16 x 2.76" Collet Chuck Collet Gage Nose Part No. Reg. 1 10 pc. ER 16 - Inch Collet Set Model No. Size Length Dia. 7-520- Net Price Cutting tool life is 1 18 pc. ER 32 - Inch Collet Set SALE! TP-C40 ER-16 2.76 1.260 -22225 $141.95 $120.66 reduced by 10% with 1 CAT 40, 1/4" x 3" End Mill Holder every .0001" of T.I.R. 1 CAT 40, 3/8" x 3" End Mill Holder Part No. ER-16 4 1.260 -22227 143.65 122.10 1 CAT 40, 1/2" x 3" End Mill Holder 7-520-TPC40 ER-32 2.76 1.970 -22253 153.00 130.05 Techniks improves 1 CAT 40, 5/8" x 3" End Mill Holder ER-32 4 1.970 -22255 153.00 130.05 cutting tool life and 1 CAT 40, 3/4" x 3-1/2" End Mill Holder Reg. Net Price saves you money. 1 CAT 40, 1" x 4" End Mill Holder $1,934.00 Produced According to AT3 Specifications. 1 CAT 40, 1/2" x 4" Drill Chuck 1 ER 16 - Wrench $ 20 1 ER 32 - Wrench 1,547 SUBURBAN TOOL Collet-Master™ WMCF Manual Index FEATURES: Collet Fixture • Horizontal/vertical set-up. FEATURES: • 5C capacity 1/16" to 1-1/8". • Spindle rides in 2 sealed, • Cam-operated collet closure. pre-loaded ball bearings. • Collet remains fixed. • Optional faceplate & v-block • Mechanical fixtures. available for eccentric forms. • 5" x 4" x 4" high. • 48 position index plate provides a • Cast Iron. hard stop every 7-1/2° ±45 arc secs. • Maximum spindle runout is 0.0001". Part No. 1-589-100 Reg. Net INCLUDES: Price $287.60 Drawbar and fitted wooden case.

$ 46 SPECIFICATIONS: 244 Through Hole...... 1-1/4" Center Height ...... 3-5/8" Model CM-5C OAL ...... 5-9/16" Indexing Accuracy ...... ±45 sec. Part No. 1-806-CM5C $ 15 Weight ...... 9 lbs. Reg. Net Price $1,419.00 1,206

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 11 WORK HOLDING SUBURBAN TOOL Tailstock Master-Grind™ Alignment Bar FEATURES: FEATURES: • Hardened steel bar ends are precision ground • Features "TWIN-DEX", which combines after assembly for superior accuracy. Bar end 5C collet and V-Block in one fixture. diameters are equal within 0.0001". • Horizontal or vertical v-vlock mounting. • Made from high strength aluminum. • Extra-large, 1-5/8" V-Block capacity. • Durable anodized finish. • Spindle runs in 2 heavy-duty, 4" tapered roller bearings. • 72 position index plate allows hard index every 5O. • Square and parallel within 0.0002". Used to align the tailstock to the • Maximum spindle runout 0.000050". headstock. Accurate alignment is • Built-in sine bar. Supplied critical to eliminate any taper in work pieces supported by the tail ® with a fitted Part No. 1-811-27000 SineSet COMPATIBLE! wooden case. $ 99 stock. Makes the process fast, Reg. Net Price $69.99 55 easy and accurate. SPECIFICATIONS: V-Block Capacity...... 1-5/8" Collet Capacity...... All 5C Through Hole...... 1-1/4" Center Height ...... 3" Height...... 6" Base (L x W) ...... 4" x 5" Knurling Tool Weight...... 22 lbs. Quick-Acting Type Model MG5-CV-S1 Knurling pressure is absorbed Part No. 1-806-MG5CVS1 $ 90 SIDE VIEW Reg. Net Price $3,114.00 between the knurls, NOT your lathe 2,646 bed, compound, centers or feed screws. Fast setup. Instantly ready for knurling. Knurling patterns are clean and sharp with no double Magnetic V-Block tracking. Includes one set of FEATURES: diagonal knurls. Size 3/4" x 3/8" x 1/4". • Fine precision ground finish for use as an inspection device. Part No. Reg. • 90o Vee. Capacity Length Shank 1-587- Net Price NOW! • Fixed on/off switch. 0-2-1/8" 6" 1/2"x 5/8" -1000 $231.30 $196.61 • Holding power: 220 lbs. 2-1/8-4 8-1/4 5/8 x 3/4 -2000 291.90 248.12 • 3-3/4" (H) x 2-3/4" (W) x 4" (L); V width 2". Part No. 1-397-405 $ 08 Reg. Net Price $93.85 75 High Speed Knurls

Straight Tooth 30° Diagonal Tooth LIMITED QUANTITIES While Supplies Last. Normal Reg. Reg. Circular Part No. Net Price Part No. Net Price TPI 1-587- Per Pair SALE! 1-587- Per Pair SALE! High Visibility 12 -S212 $31.95 $27.16 -D212 $31.95 $27.16 16 -S216 31.95 27.16 -D216 31.95 27.16 Utility Combination 20 -S220 31.95 27.16 -D220 31.95 27.16 Pipe and Bench 25 -S225 31.95 27.16 -D225 31.95 27.16 With 360O Swivel Base & 2 Lockdowns.

FEATURES: • No pinch main screw handle. • Made of structural cast steel. • Finished in high visibility safety yellow. • Replaceable hardened steel serrated top jaws. • Permanent pipe jaws & a large reinforced anvil.

Vise Jaw Jaw Pipe Throat Weight Part No. Reg. Number Width Opening Clamping Depth (lbs.) 1-554- Net Price NOW! 904-HV 4" 4" 1/4" to 1-1/2" 2-1/4" 17 -200 $123.00 $104.55 905-HV 5 5 1/2" to 1-1/2" 2-5/8 24 -205 157.00 133.45

Shop Vises

FEATURES: • 360° swivel base with double lockdown for quick and easy positioning. • Replaceable serrated top jaws. • Large anvil work surface. • Rubber pinch point safety guards. • Built-in pipe jaws handle various pipe sizes. • Designed for general duty applications.

Jaw Max. Jaw Weight Part No. Reg. Width Opening Depth (lbs.) 1-550- Net Price SALE! 4" 4" 2-3/4" 22 -63300 $164.99 $140.24 5 5 3 31 -63301 191.24 162.55 6 6 3-1/2 42 -63302 279.99 237.99 8 8 4 71 -63304 418.52 355.74

12 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com WORK HOLDING Drill Press 6 Pc. With Lugs Quick FEATURES: Change • Fixed jaw is grooved horizontally and vertically Tool Post for convenience in Sets holding round pieces. • Fine pitch, V-thread lead screw for precise movement. All Toolholders Interchangeable with Aloris Type Toolholders. SPECIFICATIONS: Jaw Width ...... 3" Jaw Depth ...... 1-1/2" Jaw Opening ...... 3" Lathe Swing Up to 12" Lathe Swing 10 to 15" Bolt Lugs...... 1/2" Part No. 1-549-320 SET INCLUDES: SET INCLUDES: Height ...... 2-5/8" $ 60 • Piston Type Tool Post Series 100 (100). • Piston Type Tool Post Series 200 (200). Weight...... 8 lbs. Reg. Net Price $136.00 115 • Turning & Facing Holder #1 (101). • Turning & Facing Holder #1 (201). • Boring, Turning & Face Holder #2 (102). • Boring, Turning & Face Holder #2 (202). • Heavy-Duty Boring Bar Holder #4 (104). • Heavy-Duty Boring Bar Holder #4 (204). • Universal Parting Blade Holder (107). • Universal Parting Blade Holder (207). Compound Slide Table • Knurling, Turning & Facing Holder (110). • Knurling, Turning & Facing Holder (210). A heavy, rugged slide used in all Part No. 1-459-500 Part No. 1-459-600 kinds of positioning, milling, drilling, Reg. Net Price $258.45 Reg. Net Price $290.00 microscope viewing and staging. $ 68 $ 50 Part No. 219 246 8-400-310 Reg. Net Price $199.00 Reducing Sleeves $ 20 Adapt small taper tools to larger 159 size spindles. Outside taper is precision ground for excellent concentricity of the holder.

SPECIFICATIONS: Morse Morse Gage Table ...... 12" Taper Taper Line Part No. Reg. Height ...... 4-1/2" Inside Outside Dia. Projection 1-543- Net Price NOW! Travel ...... 6-1/2" longitudinal, ...... 4-1/2" transverse 1 2 .700" 5/8" -60212 $24.00 $20.40 T-Slot Size ...... 9/16" 1 3 .938 1/4 -60213 26.00 22.10 Weight ...... 36 lbs. 2 3 .938 3/4 -60223 26.00 22.10 2 4 1.231 1/4 -60224 31.00 26.35 3 4 1.231 3/4 -60234 40.00 34.00 3 5 1.748 1/4 -60235 64.00 54.40 CAT 40 Tool Holder 4 5 1.748 3/4 -60245 64.00 54.40 Tightening Fixture Parallel Separator Designed to rigidly hold tool holders for Holds Parallels cutter installation. In Place... The design also No More Fumbling! allows access to pull studs. SPRING LOADED! ’S THIRD HAND... FEATURES: FINALLY A REVOLUTIONARY • Rigidly clamps CAT 40 tool holders. LABOR SAVER! • Durable one piece alloy construction. • Multi position alloy clamping handle. • Mounts with four 1/4" bolts (not included). Keeps parallels where they belong...in the vise and against the face. For 6" Vises with up to 9" Jaw Opening Part No. 1-811-23000 $ 99 FEATURES: Reg. Net Price $99.99 79 • Saves time - faster, fewer setups! Part No. 1-572-PS6900 $ 27 • Low cost - pays for itself the first day. Reg. Net Price $49.19 44

DX6™ Crossover™ FEATURES: • 80,000 PSI ductile iron Vise • DX6™ CrossOver™ vise is a body, nut & movable jaw. combination of AngLock®, Pull-Type • Repeatability within .001". and 4 bolt stationary jaw design. • Chip evacuation straight – AngLock® design reduces through the body. stress on body during clamping. • Large 9" jaw opening. – Pull-type design reduces • GrooveLock jaw plate stress on body during clamping. and workstop included. – 4 bolt design reduces stationary jaw • New brush seal design deflection & alleviates body stress. makes it easier to replace. • Bed height matched to size • Fits on D50-4-SA swivel base. 2.875" (73.025mm) ±.0005". • Hardened vise bed/jaw plates.

Max. Max. Model Jaw Jaw Jaw Vise Vise Clamping Weight Part No. Reg. No. Width Opening Depth Length Width Force (lbs.) (lbs.) 1-5721- Net Price SALE! DX6 6" 9.08" 1.735" 16.810" 7.391" 7,342 65 -DX6 $681.20 $544.96

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 13 ABRASIVES

Quick Change 2" Quickie Cut™ Reinforced Laminated Discs Cut-Off Wheels ALUMINUM OXIDE (A/O) Zirconia AO mixture. Thick TYPE "S" (.045), rigid wheel design for fast cutting and longer life. SocAtt® features an all-metal Excellent on steel/stainless. attachment on the holder pad and disc to ensure a safe, TYPE 1 secure, durable fit. Part No. Reg. Net .045 - RIGID Grit 1-631- Price/Disc NOW! FEATURES: Max. Part No. 24 -522401 $.77 $.69 Size Grade RPM 1-602- ONLY! • Ideal for flat or contour surfaces. 36 -522402 .75 .68 • Most commonly used are 40 -522403 .71 .64 4-1/2" x .045" x 7/8" ZA-36-T-RIGID 13,300 -35514 $1.55 grits 36-50 for weld removal. 50 -522404 .68 .61 5 x .045 x 7/8 ZA-36-T-RIGID 12,250 -35516 1.85 Grits 60-120 for removal of 6 x .045 x 7/8 ZA-36-T-RIGID 10,200 -35517 2.00 60 -522405 .65 .59 7 x 1/16 x 7/8 ZA-36-T-RIGID 8,500 -35518 3.10 imperfections and blending. 80 -522406 .64 .58 • General purpose grinding, 100 -522407 .64 .58 deburring, and blending 120 -522408 .64 .58 on ferrous metals. 150 -522409 .64 .58 180 -522410 .64 .58 240 -522411 .64 .58 MUST BE PURCHASED 320 -522412 .64 .58 IN PACKS OF 100. AZ Surface Interchangeable with 3M Roloc TS discs, Merit Type II Grinding Wheels Twist-On, Norton Speed-Lok Type "S" Turn-On 7" x 1/2" x 1-1/4" - 3,760 RPM 2" Disc Holder Part No. $ 34 WITH 1/4" SHANK 1-613-11173 6 Part No. Reg. Net Grit 1-595- Price/Ea. SALE! 46-H -34318 $16.50 $14.03 46-I -34319 16.50 14.03 VITRIFIED BONDED - AZ: 46-J -34320 16.50 14.03 Premium Blue Aluminum Oxide. 46-K -34321 16.50 14.03 Particularly suited for grinding 60-H -34323 16.50 14.03 HSS over 55RC. Specially 60-I -34324 16.50 14.03 recommended for grinding heat 60-J -34325 16.50 14.03 sensitive steels like aluminum 2" Surface 60-K -34326 16.50 14.03 and stainless steels. It grinds 80-K -34329 16.50 14.03 with an exceptionally cool cutting Conditioning action. Requires minimum dressing. Discs 100-K -34330 16.50 14.03 A/O RAPID CUT

TYPE "S" Mini-Grinder Brushes 5/8"-11 THREADED HOLE FEATURES: • Highest initial rate of cut. • Very flexible and durable. Part No. Reg. Net • Recommended Speed: Grade 1-631- Price/Disc SALE! 12,000 to 20,000 RPM. WIRE SIZE .020" • Highest stock removal Coarse -840334 $1.14 $1.03 Medium -840335 1.14 1.03 and resists "loading" Very Fine -840336 1.14 1.03 Maximize your on softer metals. "Mini" grinder with the line of compact brushes. Designed specifically to fit Stringer Bead Twist Wheel the majority of the Knot Style Cup Wheel TM mini-grinders used Wheel Dia.: 4" 2" Scotch-Brite Wheel Dia.: 2-3/4" Trim Length: 3/4" today, our wide line Trim Length: 7/8" RolocTM Bristle & multiple arbor hole Face Width: 3/16" adaptation covers Part No. 1-621-115 Part No. 1-621-117 Discs both light and Reg. Net Price $18.35 Reg. Net Price $17.55 heavy-duty cleaning jobs. Carbon $ 60 $ 92 steel wire. FEATURES: 15 14 • Discs are designed to resist loading, extending service life. • Continuous supply of mineral in abrasive-filled bristles provides a 6" Diamond Plain high cut rate and more uniform finish. Cup Wheels • Flexible yet durable bristles conform the work piece without damaging base material. Type 6A2C D • Maximum Speed: 25,000 RPM. W

T Part No. Reg. Net E Grit Color 1-630- Price/Disc NOW! FEATURES: H 50 Green -18730 $9.35 $8.42 • Resin bonded. 80 Yellow -18732 9.35 8.42 • 150 Grit, 120 White -18733 9.35 8.42 100 Concentration - 1/8" Depth 75 Concentration - 1/16" Depth • With countersunk bolt holes.

Type "R" Quick-Change Economy 75 Concentration with only 1/16" Diamond Depth. Interchangeable with 3M ROLOC® Thick. Depth Hole Part No. Reg. Type "R" Rol-On Medium Density T W H 1-640- Net Price SALE! Use for grinding single point turning 2" Disc Holder Part No. $ 34 3/4" 3/4" 1-1/4" -162 $110.10 $88.08 tools. Available 1-613-11275 3/4 1/2 1-1/4 -163 94.25 75.40 WITH 1/4" SHANK 6 1 3/4 1-1/4 -164 118.60 94.88 in D11V9.

14 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com ABRASIVES SHUR-KUT® Premium India Gold Stik-On Stearate Square Paper Discs Abrasive ALUMINUM Heavy duty paper disc with anti-load stearate OXIDE Files coating that is resin bonded for fast cutting and long life. Designed for industrial and automotive use. Ideal for metal, wood, paint and fiberglass. INDIA FILES: Smooth cutting aluminum oxide abrasive. Ideal Part No. Reg. Net when a close tolerance is more Size Grit 1-613- Price/Roll SALE! important than the speed of cut. 80 -25078 $37.02 $33.32 Applications range from 100 -25079 34.62 31.16 Part No. Reg. 120 -25080 34.62 31.16 Size Grit 1-632- Net Price NOW! dimensioning keyways to 5" 150 -25081 34.62 31.16 maintain fit, stoning faces on 4"x 1/4" Medium -86070 $8.45 $7.61 bits, touching-up edges 100/roll 180 -25082 34.62 31.16 4 x 1/4 Fine -86065 8.45 7.61 220 -25083 34.62 31.16 of reamer teeth, and / 240 -25084 34.62 31.16 4 x 3/8 Medium -86085 8.56 7.70 honing to close tolerance to 320 -25085 34.62 31.16 4 x 3/8 Fine -86080 8.56 7.70 produce the finest edge on 4 x 1/2 Medium -86100 8.63 7.77 precision instruments, 4 x 1/2 Fine -86095 8.63 7.77 work and delicate tools. Single-Point Diamond Reamer 5" x 1" x 3/16" Stone Dressers Part No. 1-632-87425 Reg. Net Price $11.76 Part No. 1-640- Weight 3/8" 7/16" 1/2" Reg. FINEST QUALITY $ 58 (Carat) Shank Shank Shank Net Price NOW! 10 1/4 -200 -201 -202 $5.70 $4.85 1/3 -203 -204 -205 6.30 5.36 India (aluminum oxide) Reamer Stones 1/2 -206 -207 -208 8.95 7.61 are durable, fast-cutting stones designed 3/4 -209 -210 -211 14.85 12.62 for imparting a professional edge on reamers, 1 -212 -213 -214 22.05 18.74 taps and rough rounders on shoe machine tools.

Flap Discs Z3 ZIRCONIA - Premium 100% Zirconia FEATURES: Aluminum with cotton • Gives up to 30x more life than a resin fiber-disc fully backing to provide flexibility. saving considerable set-up time and money. guaranteed Offers maximum cutting • Cuts much cooler and reduces glazing capacity, strong edge and loading with self sharpening flaps. stability and long-life. • Especially lightweight design reduces operator fatigue and noise levels. • Provides better quality and consistency of surface finish.

TYPE 27 TYPE 29 TYPE 27 - Used when TYPE 29 - Conical type Part No. Reg. Net Part No. Reg. Net working on flat grinding has an angle excellent for Size Grit 1-704- Price/Ea. SALE! 1-704 - Price/Ea. SALE! surfaces. Most efficient contour and edge work. 4-1/2" x 7/8" 40 -2302 $3.90 $3.51 -2322 $3.90 $3.51 when used between Best at more dramatic 13,300 60 -2304 3.90 3.51 -2324 3.90 3.51 0-15° angle. angle of 15-25°. RPM 80 -2305 3.90 3.51 -2325 3.90 3.51

Deburring Tools Deburring & THE FINISHING TOUCH... Chamfering Kit Internal and external rotary deburring tool. Twist of the wrist motion for convenient SET INCLUDES: Part No. 1-457-375 deburring of holes and radii. • Mango II Handle Reg. Net Price $62.10 • Holder E Model Model • Holder F $ 95 Model B10P B25 • Blades: E100S, 49 B10 E111, E200, E300, PVD Titanium Nitride A very thin blade E601, F20, F26X H.S.S. blade excellent for coated B10 blade for specifically designed to materials with spiral chips high wear conditions. deburr soft plastics. such as aluminum, plastics, Part No. Part No. steels, etc. For longer life. 1-457-008X 1-457-066 Part No. 1-457-008 Reg. Net Reg. Net Reg. Net Price $1.63 Price $1.92 Price $1.97 $ 22 $ 44 ¢ 007 Deburring 1 1 99 Set Model B Deburring INCLUDES: Model SP1007 • RB handle (12mm hex, aluminum). Part No. Tool Set • OR ("O" ring grooves blade). 1-457-525 SET INCLUDES: • RD 16.5 (RotoDrive countersink). Reg. Net • Classic Handle. • RDE 18 (External RotoDrive countersink). Price $43.35 • Model B blade holder. Part No. 1-457-052 $ 42 • TC (Thread cleaner blade). • Blades: B10 & B20. Reg. Net Price $11.78 9 • S100 Blade (for steel). $ 68 • S150 Blade (for plastic). 34

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 15 MEASURING & INSPECTION Electronic Thickness Gage SPECIFICATIONS: Series 950 - Inch Height Offset A ...... 1" B .... 2.000" ± .0002" Sensor C ...... 310" FEATURES: • Each leaf is marked with its FEATURES: C thickness and is detachable. • Repeatability T.I.R. • Thicknesses Included: within .0002"-.0006mm. Part No. (26) .002" - .018" by • Four high visible lights. 1-801-310 .001" step, plus .022, .024, .025, • Made of high quality tool B Reg. Net .028, .030, .032, .035" steel hardened to 60 RC. • Blade Length: 3" • Easily replace lamp and battery. Price $135.53 • Precision ground on all surfaces. • One-piece design construction $ 20 Part No. 1-808-950251 $ 25 gives strength and accuracy. A 115 Reg. Net Price $29.70 25

Plastic Thickness Edge & Center Gage Finders FEATURES: FEATURES: • Color indicates thickness. • Accurately locates the starting point for • Packaged in a sturdy vinyl case. all types of machine work and jig boring. • Made of the highest • Precision ground and hardened all over. quality plastic material. • Supplied in a fitted case. • Contains thirteen blades riveted Part No. Reg. together for on-site convenience. Type Shank x Head 1-804- Net Price SALE! • Non-corrosive, non-conductive, non-sparking, and non-marring. Edge Finder 3/8 x .200 -528 $12.17 $10.34 Combo Edge/ Center Finder 3/8 x .200 -531 13.91 11.82 THIRTEEN THICKNESSES Double 5" Fan Blade Set 1/2 x .200 -533 13.91 11.82 Decimal/Metric Color Decimal/Metric Color Decimal/Metric Color Part No. Edge Finder .001"/.025mm Amber .005"/.127mm Blue .015"/.381mm Pink .0015/.038mm Purple .0075/.191mm Matte .020/.508mm Yellow 1-958-78905 .002/.051mm Red .010/.254mm Brown .025/.635mm White .003/.076mm Green .0125/.305mm Black .030/.762mm Coral $ 80 P.D. Check™ Thread Wire .004/.102mm Tan 26 Attachment System The first new breakthrough in measuring Fillet or Radius threads using the 3 wire method in 35 years! FEATURES: Gages • Fits all MIC's with .245" to .312" . These gages are used • No more lost thread to measure convex & wires in the chip pans. concave radii works. • Specifically designed for rapid and accurate measurement. • Each part fits 2 sizes of wires. INCH • not included. No. Of Part No. Reg. Leaves Range Radii 1-820- Net Price SALE! SET INCLUDES: 30 1/32-1/4" -306 $12.85 $9.64 • .018"-.022" (Purple) 32 17/64-1/2 -307 15.30 11.48 • .024"-.032" (Blue) • .040"-.045" (Yellow) METRIC • .055"-.063" (Green) No. Of Part No. Reg. • .072"-.081" (Red) Leaves Range Radii 1-820- Net Price SALE! 34 1.0-7mm -258 $9.75 $7.31 INSTRUCTIONS: Part No. 32 7.5-15 -259 11.70 8.78 1. Select the Proper Size wires. 1-820-16707 30 15.5-25 -260 11.70 8.78 2. Match the Wire Size with the Proper P.D. Check™ Reg. Net 3. Slip Two Wires in the Holder. 4. Now Place the Holder on the MIC's Anvil. Price $22.70 5. Hold the Micrometer in one Hand and the Third Wire in the other. $ 30 6. Check the Threads. 19 II Electronic Micrometer 2-8" Inside Micrometer Series 141 - Interchangeable Type FEATURES: • Each interchangeable rod is marked with its measuring range. • The sizes of interchangeable rods can be adjusted with spacing collars. • Both micrometer head and furnished rods are satin-chrome finished throughout. FEATURES: • Wide range of ID measurements • Ratchet thimble. with interchangeable rods. • Large LCD display. • Includes (1) Mic Head and • Direct RS232 output. FREE (3) rods (diameter: .248"). • Carbide measuring faces. BALL • Jet black, grey, enamel finish. ATTACHMENT! • Resolution: .00005" (.001mm.) SPECIFICATIONS: • Accuracy: ±.00016"/.004 (up to 2") Size Range: 0-1" (0-25mm) • Absolute and incremental modes. Range ...... 2-8" Part No. 1-808-141208 Part No. 54-870-001 Spacing Collar ...... 500" $ 85 • Replacement battery: CR2032 $ 80 Reg. Net Price $201.00 • Includes shop hardened case. Reg. Net Price $92.70 78 Graduation ...... 001" 170

16 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com MEASURING & INSPECTION IP65 6" Digital 4 Pc. Combination Torpedo Level Square Set FEATURES: • Reversible reading. • HOLD and Zero functions. • Rare-Earth magnetic base. • Precision digital level sensor. • Calculate tilt percentage rate. • V Groove base for measuring cylindrical objects. Part No. 1-815-455 • Rechargeable battery Reg. Net Price $74.90 (USB charging cable included). • Large LCD display with backlit. $ 18 • Industrial grade aluminum body. 56 • IP65 water & dust resistance rating. • 1 year warranty.

SPECIFICATIONS: o o FEATURES: Measuring Range 360 ...... 90 x 4 • 4R Graduation: 8ths, • Protractor head is graduated 180° Resolution...... 0.05o o 16ths, 32nds, & 64ths. in both directions and with a level. Repeatability ...... 0.1 Part No. 1-815-210 • 12" Satin Chrome finished blade • Smooth edged locking clamp Accuracy ...... ±0.2o $ 95 Reg. Net Price $79.95 is hardened and tempered with screw for easy assembly Dimensions ...... 6" x 1.18" x 2.46" 59 easy to read laser etched graduations. and smooth travel. • Square Head featured with • Certificate of Inspection included. a level and a point. • Completed with molded protective case. Touch Off Gage

The Touch Off Gage allows standardization the way tool offsets are measured in the shop. 6 Pc. Set-Up Use this gage by lowering the tool down onto the contact face until the indicator reads zero. At that point the tool tip is exactly 4 inches from the surface the Touch Off Gage is sitting on. & Inspection Kit FEATURES: • Gage graduations 0.001". • Gage repeatability 0.0002". • Accurately establishes tool length offsets for CNC milling machines. • The contact face is lightly spring loaded to protect against overrun. • Contact face diameter is 1/4". Part No. • The rectangular base and recessed indicator face allow it to fit between 1-811-52000 vise jaws on a pair of parallel bars. Reg. Net • Offset height 4" (101.6mm). Price $124.99 • Large 2.2" easy to read indicator face. INCLUDES: • Easy calibration check using 1-2-3 blocks. $ 24 • Dial Caliper: 0-6" • Body and contact face are made from 106 • 12" Blade 4R (8ths, red anodized 6061-T6 aluminum. 16ths, 32nds, 64ths) White Face Dial Caliper Kit • Padded case and manual included. • Outside Micrometer: 0-1" x .0001" Part No. 8-135-0018 • Square, Protractor and Center Head $ 12 • Fitted Plastic Case Reg. Net Price $93.90 75 0-22" Electronic Depth Gage Precision FEATURES: Parallel Set • Hold feature. • ON/OFF button. Matched Pairs • Zero reset at any position. 5 Holes • Relative/absolute measuring. • Bottom surface of the base is 4 Pair Set with Plastic Case. hardened, ground & lapped. 3/16" x 1" x 6", 3/16" x 1-1/4" x 6", • Includes shop-hardened case. 1/2" x 1-1/2" x 6", 1/2" x 1-3/4" x 6" • Includes 2 extra points for small hole applications; (1) .078" dia. x 1" long and Part No. (1) needle point x 1" long. FEATURES: • Hardness: Case hardened to RC 1-801-210 55-62 on 2 sides top and bottom only. Reg. Net SPECIFICATIONS: Part No. 54-125-777 • Dimensions: Within 0.001" allowance. Price $46.50 • Made from fine quality tool steel stress relieved Range ...... 0-22" Reg. Net Price $253.33 Base Size ...... 4" against distortion, precision ground and hardened. $ 00 Resolution ...... 0005" (.01mm) $ 33 • Tolerance: Parallel 0.0003" on 2 sides, top and bottom. 35 Travel (Electronic) ...... 0-1" 215 • The holes are designed for easier handling and set-ups.

0-6" Steel Rule 3 Pc. Machinist Depth Gage Square Set Series 237 FEATURES: • Hardened steel head FEATURES: and an accurate, machine • Manufactured to DIN 875-1 divided, tempered steel rule. standard specification. • Gage can be smoothly • Hardened spring steel blades. adjusted to the required Graduation: 32nds, 64ths • Precision ground and lapped. measurement and then Head: 2-5/8" x 1/8" • Complete with protective case. • Included Sizes: 2, 4, & 6". locked into position Starrett #237 by a knurled nut. • Base is cut out on Part No. 1-855-51080 Part No. 1-815-220 one side, adjacent to Reg. Net Price $60.00 Reg. Net Price $52.00 the rule, permitting easier readings and more $ 00 $ 95 accurate measurement. 51 39

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 17 MEASURING & INSPECTION Precision Toolmakers’ V-Block & Clamp V-Block FEATURES: • Ultimate V-Block for grinding, milling, or drilling. Sets • Made of hardened and precision ground tool steel. • The sides are parallel and vee is central and ground. FEATURES: • Central hole is provided for drilling or removing pins. • V’s are ground central, • Clamp is smaller than outside width of V-Block parallel, and square. and has adjustable side screw for support. • Matched accuracy .0002". • V-Block has four 3/8-16 tapped holes, two in the • All sides are ground square and base and one on each side for angle iron clamping. parallel to pin accuracy of 0.0003". • 2-475-015 & 2-475-020 Models are designed so the clamps do SPECIFICATIONS: not protrude over the sides; thus Length ...... 3-1/2" the tool can be used on its sides. Width ...... 1-7/8" • Supplied in pairs w/ 2 clamps. Height ...... 1-7/8" Holding Capacity ...... 1-5/16" Tolerance ...... 0003" Part No. Reg. Net Capacity Dimensions 2-475- Price/Set SALE! One Block & One Clamp 1" 1-3/8" x 1-5/8" x 1-3/4" -005 $49.90 $39.92 Part No. 1-397-710 $ 93 1-1/2 1-5/8" x 1-3/4" x 2-3/4" -010 62.90 50.32 Reg. Net Price $59.90 1-1/2 1-3/4" x 2-1/2" x 2-3/4" -015 79.50 63.60 44 2-1/8 2-3/4" x 3-1/2" x 4-7/8" -020 179.00 143.20 6 Pc. Telescoping HDS Digimatic Gage Set Height Gages w/ Series 579 Self-Centering with Two Telescoping Arms. Absolute Encoder FEATURES: Series 570 - with Output • Used for determining the true size of holes, slots and FEATURES: recesses. The final hole size • Feed wheel. • Functions Include: Zero-Setting is obtained by measuring • Can easily measure (ABS & INC modes), Presetting over the gage contacts with the height of small parts. (ABS & INC modes), Hold/Data a micrometer. • Unlimited response speed. Button, Inch/mm Conversion, • Gages feature a handle, • Absolute encoder for direct Data Output, Error Alarm, Low one rigid contact arm measurement from power on. Battery Alarm, ON/OFF, Origin. and two spring-tensioned • Easy-to-read, large LCD display, • Battery Life: Approx. 20,000 hrs. telescoping contact arms. 6 digit and minus sign (-). • Economical energy-saving design. • The ends of both contacts are hardened and ground to radius to allow proper Part No. Reg. clearance on the small Range Resolution Accuracy 1-808- Net Price SALE! hole the gage will enter. Starrett #S579HZ 0-12" (0-300mm) .0005" (0.01mm) ±.0015" -570312 $646.00 $549.10 • These tools must be slightly "rocked" in the Part No. 1-855-52617 0-24" (0-600mm) .0005" (0.01mm) ±.002" -570314 1,160.00 986.00 hole being measured to ensure that the tool is on the proper diameter before Reg. Net Price $282.00 it is locked and withdrawn. • Complete set of 6 (5/16 to 6") in plastic case. $ 70 (Included No. 579A, B, C, D, E, F). 239 IP54 0-6" Electric Digital Quill Kit FOR MILLING MACHINES & FEATURES: • Easy Install Fits Most Vertical Knee Mills. Center Finder • Absolute encoding technology w/ Attachments (Memorize absolute origin zero). • Hardened stainless steel body. Series 828 • IP54 Digital Scale. • Easy to read LCD with resolution of Part No. .0005"/0.01mm/64th fractional. 1-815-600 FEATURES: Starrett S828HZ • Readout Accuracy: .001" • Four different attachments (Holder, Point, Reg. Net Part No. 1-855-53064 • Ability to preset value. Price $110.00 Ball, and Disc Contact) to adapt to countless • Zero-Set and On/Off. applications and are readily changeable. Reg. Net Price $68.00 • Data output available. $ 50 • Attachments are snapped into chuck • Ultra-Response measure speed. without removing the collet nut. $ 80 • Uses (2) CR2032 Batteries 93 • Comes complete with case. 57

Inspection Gage Balls Center Gages 26 pairs of precision balls Series C391 ranging from 1/8" to 1" diameter. FEATURES: FEATURES: • Extremely handy for use in grinding • Certified. and setting screw cutting tools, meets • Ground and lapped. all of the following standards: American • Chrome steel hardened to 63 RC. National or U.S. 60°, Whitworth • 4 wells provided for additional sizes. or English 55°, and Metric 60° American Unified • Grade 24 accuracy - AFBMA Certified. • Have a very useful scale for National Standard 60O • Attractively arranged in a plastic case. finding the number of threads per inch through graduations in 14ths, Starrett #C391 SIZES: 1/8", 9/64", 5/32", 3/16", 20ths, 24ths and 32nds of an inch. Part No. 1-855-51475 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", • Have a table of double depths of Reg. Net Price $26.50 13/32", 7/16", 15/32", 1/2", 17/32", Part No. 2-672-070 threads for determining size of tap drills. $ 79 • Made of spring-tempered steel with satin 9/16", 19/32", 5/8", 21/32", 11/16", Reg. Net Price $75.90 $ 53 23/32", 3/4", 13/16", 7/8", 15/16" & 1" 66 chrome finish. Gaging surfaces ground. 22

18 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com MEASURING & INSPECTION IP54 Large Display Electronic Caliper Dial Calipers INCH - METRIC - FRACTIONAL

Supplied in shop hardened case.

FEATURES: • Accuracy: ±.001" • Dial Graduation: .001" FEATURES: • .100" per revolution. • Resolution: .0005" (.01mm / 1/128" fractional). Part No. Reg. • Dial Color: White • Hardened stainless steel body. Range: 0-6" (0-150mm) Range 52-008- Net Price SALE! • 4-way measurement.. • Precision lapped finish for smooth travel. Part No. 1-815-100 • IP54 - Splash water, oil and dust resistant. $ 46 0-6" -007 $63.65 $50.92 • Hardened stainless Reg. Net Price $49.95 0-12 -012 138.45 110.76 steel covered rack. • 1 Year Warranty. 37 IP54 Absolute 0-6" Electronic Caliper Digital Caliper with Smart Wireless Communication

2 YEAR WARRANTY!

FEATURES: • Resolution: .0005" (.01mm) • SPC Output with USB connection available. • Unlimited measuring speed. • Meets DIN standard 862; ISO 9001 FEATURES: certified manufacturing. • Range: 0-6" (0-150mm) • IP54 splash water and dust resistant. • Hardened stainless steel, lapped finished. • Battery: (1) 3V CR2032 (spare included) with • Accuracy: .001" (.02mm) a life of 2 years under normal operation. • Heavy duty frame with 4 way measuring. Part No. • Operating Environment: Temp. 32OF - 104OF; Relative Humidity: 80% • 2 year warranty. • Super large display. 54-100-556BT • HID interface allows connection to most Reg. Net Part No. Reg. bluetooth enabled devices. Range Accuracy 1-815- Net Price SALE! • Supplied with NIST certification. Price $185.00 0-6" (0-150mm) .001" (.02mm) -130 $64.40 $48.30 • Protected to IP67. 0-12" (0-300mm) .0015 (.04mm) -140 113.75 85.31 • Replacement battery CR2032. $ 25 • Extra battery tray and 1" standard included. 157 ABSOLUTE Digimatic Calipers Series 500 w/ Exclusive ABSOLUTE Encoder Technology

Electronic Calipers EXPANDED LISTING! Mitutoyo's Digimatic Caliper keeps track of its origin point once set. Whenever turned on, the large LCD screen displays the actual slider position ready to start measurement. No more repeated zero setting is necessary with the absolute encoder technology as well as no more care for overspeed errors.

FEATURES: FEATURES: • Direct inch/metric • Thumb roller included. conversion. Range: 0-6" • Large and clear LCD readout. • 4-way measurement. Part No. 54-101-150 $ 55 • The ZERO/ABS key allows the display to be Zero-Set at any slider • Stainless steel frame. Reg. Net Price $47.70 position along the scale for incremental comparison measurements. • Large easy-to-read display. 40 This switch will also allow return to the absolute (ABS) coordinate and • Resolution: .0005" (.01mm) display of the true position from the origin point (usually jaws-closed point). • Absolute/incremental Range: 0-12" measurement. Part No. 54-101-300 WITHOUT SPC OUTPUT MODELS • Supplied with a $ 30 Reg. Net Price $120.35 102 Part No. Reg. molded case. Range Resolution 1-808- Net Price SALE! Supplied 0-4" (0-100mm)* .0005" (.01mm) -500195 $148.00 $125.80 0-6" (0-150mm) .0005" (.01mm) -500196 161.00 128.80 in a fitted 0-8" (0-200mm) .0005" (.01mm) -500197 231.00 196.35 plastic case. * 0.75" Rod depth bar. Caliper Jaw Dial Calipers Attachment Series 3202 for Anvils Starrett Part No. Reg. Use Mic Anvils No. Range 1-855- Net Price SALE! on 4-6-8" Calipers 3202-6 0-6" -61467 $116.00 $98.60 3202-8 0-8 -61468 166.00 141.10 3202-12 0-12 -61466 242.00 205.70 FEATURES: • Adjustable bezel. Knife-edge contacts. • Sharp, clear dial graduations. • Sharp, black graduations on satin finished bar. Caliper jaw attachment is • Thumb-operated fine adjustment roll. • Provides quick, accurate measurement of fastened to your caliper • Lock screws for sliding jaw and dial bezel. O.D., I.D. and depth. jaw, and the mic anvil fits Part No. 1-850-Z9050 $ 55 • Positive, spring-loaded double pinion • Hardened stainless steel bar, measuring onto the jaw attachment. Reg. Net Price $28.88 anti-backlash control. surfaces, rack, gears & depth rod. 24

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 19 MEASURING & INSPECTION Bore Gage Setting Supplied in a fitted case! IP65 Dial Test Master Kit Indicator Accurately set any bore gage up to 6" in diameter to an accuracy of .0001". Bore gage not included. FEATURES: EACH KIT INCLUDES: • Range: 0.030" SETTING DEVICE: • Graduation: .0005" • Quick-release holder for fast adjustment. • Reading: 0-15-0. • Adjustable Anvil: 2.375" x .375" (2 each) • IP65 water and dust • Centralizer Capacity Width: 2.625" protective rating. • Base Anvil: 2.750" x .80" • Jeweled movement. • Internal Capacity: 6" • Satin chrome finish body. • Depth Capacity: 1" • Face Diameter: 1-1/2" • Carbide Contact Points: ECONOMY GAGE BLOCK SET: Inch Kit with 36 Pc. Block Set .040", .080", .120" Part No. • Certificate of calibration to N.I.S.T. Part No. 53-646-000 $ 74 • Point Length: 1/2" 1-815-350 • Tolerance to .00005". Reg. Net Price $267.65 • 3 Dovetail Mountings Reg. Net • AS-2 Grade. 200 (front, top, rear) • 2 Dovetail Clamps Price $57.40 (3/8" & 5/32") • Wrench included. $ 95 6" Extended Range Dial Bore Gage Set • 1 year warranty. 42

FEATURES: • Range: 0.7-6" (up to 10" deep). • Accuracy: 0.0005" with crisp precision graduations. • Carbide tip on plunger. Dial Test • Full set of attachments Starrett and parts included. Indicator #3809A • 1 Year Warranty. • Supplied in a protective case. Series 3809 Part No. 1-855-12333 Part No. 1-815-400 $ 95 Reg. Net Reg. Net Price $157.40 99 Price $111.00 $ 35 FEATURES: 94 • Contacts are frictionally Dial Bore Gages adjustable and replaceable. Series 511 • Meets or exceeds ANSI/ASME INCLUDES: FEATURES: 2923SB-10 INDICATOR FEATURES: accuracy specifications. Indicator, .156" • Interchangeable anvils and necessary accessories • Range: .05" • Precision gear-driven design contact point, 3/8" to perform close tolerance I.D. measurements. • Graduation: .0001" with smooth, jeweled movement. & 5/32" dovetail • A Digimatic Indicator can be attached • Dial Reading: 0-5-0 • Narrow body for in reach ability. clamps & case. in place of the dial gage. • Satin chrome finish for durability. • Accuracy: .0002" (5µm) • 3 dovetail positioning mounts • Carbide ball contact No. of No. of Probe Part No. Reg. work with most existing test SPECIFICATIONS: point for durability. Range Anvils Spacers Depth 1-808- Net Price SALE! indicator accessories. Range ...... 030" • Optional extension .70-1.4" 9 2 4" -511751 $423.00 $359.55 • Contact point reverses auto- Graduation ...... 0005" rods can be attached. 1.40-2.5 6 4 6 -511752 413.00 351.05 matically, always maintaining Dial Readings ..... 0-15-0 clockwise hand rotation. Dial Diameter ...... 1-1/4"

WITH 5/32” adapter Contact FITTED shank diameter. Points Dial Test CASE All contact points Horizontal Indicator are carbide. Indicators Model No. 312b-1 Part No. 1-818-004 $ 55 For all series Reg. Net Price $283.00 240 312 models except: SPECIFICATIONS: 312B-15, and 312B-15V Graduation ...... 0005” Capacity ...... 060” Vertical Indicator Model Part No. Reg. Dial Diameter ...... 1-1/2” Model No. 312b-1v No. Dia. Length 1-818- Net Price SALE! Dial Reading ...... 0-15-0 Part No. 1-818-009 T-481 .080" 11/16" -015 $25.00 $22.50 Carbide Point Dia...... 080” $ 85 T-483 .060 11/16 -016 25.00 22.50 Lgth ... 11/16” Reg. Net Price $301.00 255 T-485 .031 11/16 -017 25.00 22.50

Horizontal Test 3D Universal Mini Indicator and Magnetic Base Accessory FEATURES: Combo Kit • Power pull: 50 lbs. • Overall reach: 7.5" • ON/OFF magnet switch. • V-groove magnet bottom FEATURES: surface for curved surface. • Range: .060" • Anodized universal arm • Graduation: .0005" with one knob central lock. • Dial Diameter: 1-1/2" • Dovetail clamp for test indicator. • Dial Reading: 0-15-0 • Clamping hole for indicator stem. • Complete with a protective mold- ed case with space for test and SET INCLUDES: dial indicator storage. • Axial support. • Height gage bar • 1 year warranty. • Adapter sleeve. w/clamp. • 2 dovetail stems. • 3 contact points: • Universal holder. (.040", .080" & .120"). Part No. 1-815-250 $ 95 • Dial test indicator. • Contact point wrench. Reg. Net Price $45.50 29 • Supplied in fitted Part No. 8-100-4870 $ 95 plastic case. Reg. Net Price $106.95 79

20 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com MEASURING & INSPECTION Dial Indicator & Dial Flexible Magnetic Indicator Base Combo Kit FEATURES: • 4-48 Thread. • Tolerance markers. DIAL INDICATOR • Solid brass housing. FEATURES: • Popular AGD 2 Series. • Graduation: .001" • Supplied with lug back. • Revolution counter. • Carbide tipped contact points. • .100 per revolution. • Meets ANSI specs for accuracy. • Dial Reading: 0-100 SPECIFICATIONS: Graduation ...... 001" KIT INCLUDES: Range ...... 1" • Dial Indicator Dial Reading ...... 0-100 • Flexible Magnetic Base Part No. 8-135-0038 $ 36 • Supplied in Plastic Storage Case. Reg. Net Price $64.20 51 Part No. 52-520-110 Reg. Net Price $35.35 $2828

All packed in a Shop-Hardened case! AGD INDICATOR MAGNETIC INDICATOR FEATURES: BACK FEATURES: • Travel: 1" • Use for positioning • AGD Group 2. the indicator on Dial Indicator • Reading: 0.001" most metal surfaces. • Dial Diameter: 2-1/4" • Protective coating. AGD GROUP 2 - No. 25 Series • Carbide tipped point. • Continuous Reading: 0-100 FEATURES: • Shockless, hardened steel FLEX ARM MAG BASE gear train and jewel bearings. FEATURES: • Hardened stainless steel bottom Part No. stems, balanced and tapered • 85lb. pull magnet. 52-585-500 • Holds rigidly in hands are easy to follow. Starrett almost any position. Reg. Net • Furnished with a lug-on-center back. #25-441J • V-base for mounting Price $122.55 Part No. on rounded surfaces. • Easy readability. • Corrosion resistant $ 04 1-855-53295 chrome plated flex arm. 98 SPECIFICATIONS: Reg. Net Graduation ...... 001" One Rev. Range ...... 100" Price $162.00 Total Range ...... 1.000" $ 70 Dial Reading ...... 0-100 IP54 Dial Indicator & 137 Magnetic Base Kit INDICATOR FEATURES: • AGD Group 2, 2-1/4" dia. • Travel: 0-1" • Reading: .001" • Continuous reading: 0-100 Electronic Indicators • IP54 Water, dust, moisture Low Cost, resistance rating. Part No. 1-815-305 High Quality, • Tolerance markers. Reg. Net Price $65.00 Multi-Function • Lugback and carbide point. Indicators • Robust, shockproof design. $ 99 • Rubber bellows on stem. 47 FEATURES: • Floating zero. MAG BASE FEATURES: • Manual ON/OFF. • Fine adjustment. • Dial Face: 2-1/4" • Base dimensions: 2 x 2-11/32" x 1-13/16" • Tolerance indicators. • On-Off lever release magnet. • Carbide tipped point. • V-base for placing on round surfaces. • Resolution: .0005" (.01mm) • 85 lbs. pull. COMPLETE WITH • Direct inch/metric conversion. MOLDED CASE. • Absolute/incremental reading. • Lugback & 3/8" stem mountings.

Universal Part No. Reg. Magnetic Range 54-520- Net Price SALE! 0-.5" (0-12.5mm) -255 $96.34 $77.07 Base Magnetic 0-1" (0-25mm) -250 103.73 82.98 WITH FINE ADJUSTMENT ON THE TOP Stand Stand accept all FEATURES: AGD-type dial indicators, • Five axis holder. test indicators and Indicator • Instant fixation in any position. probes having 3/8" dia. • Fast and easy to set up gauges. shank and/or lug back with Extension • Universal swivel clamp holds a 6mm, 1/4" dia. mounting hole. The ON/OFF switch Points 8mm, 3/8" stem, dovetail or back lug. offers instant mounting and dismounting • Powerful magnet with ON/OFF switch. without any adverse effect to the indicators • Central locking mechanism with NOGA or work surface. Stands have a magnetic Part No. Length 1-850- ONLY! designed spring loaded bearing. pull of 132 lbs. • Arm Length: 4.33" Bottom, 3.98" Top. Use to gain extra length. 1/2" -Z9391SS $2.90 • Magnetic Pull: 176 lbs./ft. Model 7011BN 7/32" diameter points 3/4 -Z9392SS 3.20 have 4-48 internal and With 6" Fine Adjust Rod 1 -Z9339SS 4.10 Model No. DG61003 4-48 external threads. 1-1/4 -Z9393SS 4.80 and Universal Clamp 1-1/2 -Z9343SS 4.55 Part No. 1-457-909 Made of corrosion $ 72 Part No. 1-808-7011 $ 05 resistant 303 1-3/4 -Z9394SS 4.65 Reg. Net Price $109.65 87 Reg. Net Price $153.00 130 stainless steel. 2 -Z9340SS 4.40

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 21 TOOLROOM ACCESSORIES Oil Hardening METRIC SIZES Size Decimal Part No. 36" Length Tolerance: (mm) Equiv. Inches 1-950M ONLY! Drill Rods Ground Plus or Minus 0-1 Quality Non-Distorting Drill Rods. .0005" 2 0.0787 -002 $2.73 FRACTIONAL SIZES 3 0.1181 -003 3.13 4 0.1575 -004 3.41 Part No. Part No. Part No. 5 0.1969 -005 4.31 Size 1-950- ONLY! Size 1-950- ONLY! Size 1-950- ONLY! 6 0.2362 -006 5.45 1/16" -004 $2.21 23/64" -023 $8.72 13/16 -052 $30.59 7 0.2756 -007 5.93 5/64 -005 2.41 3/8 -024 7.73 27/32 -054 32.49 8 0.3150 -008 7.15 3/32 -006 2.65 25/64 -025 10.00 7/8 -056 29.26 9 0.3543 -009 8.62 7/64 -007 2.79 13/32 -026 10.73 29/32 -058 37.99 10 0.3937 -010 10.60 1/8 -008 2.68 27/64 -027 11.69 15/16 -060 40.00 11 0.4331 -011 13.06 9/64 -009 3.17 7/16 -028 12.01 31/32 -062 42.91 12 0.4724 -012 15.00 5/32 -010 3.34 29/64 -029 13.45 1 -100 38.62 13 0.5118 -013 17.07 11/64 -011 3.57 15/32 -030 13.76 1-1/16 -104 48.92 14 0.5512 -014 19.73 3/16 -012 3.43 31/64 -031 15.36 1-1/8 -108 50.40 15 0.5906 -015 22.61 13/64 -013 4.37 1/2 -032 13.08 1-3/16 -112 61.29 16 0.6299 -016 24.84 7/32 -014 4.69 17/32 -034 16.62 1-1/4 -116 59.82 17 0.6693 -017 28.49 15/64 -015 5.02 9/16 -036 18.66 1-5/16 -120 71.73 18 0.7087 -018 32.02 1/4 -016 4.54 19/32 -038 20.77 1-3/8 -124 69.93 19 0.7480 -019 34.72 17/64 -017 5.48 5/8 -040 19.78 1-7/16 -128 85.94 20 0.7874 -020 30.18 9/32 -018 5.94 21/32 -042 25.16 1-1/2 -132 82.47 21 0.8268 -021 33.34 19/64 -019 6.23 11/16 -044 27.59 1-5/8 -140 105.31 22 0.8661 -022 38.36 5/16 -020 5.77 23/32 -046 30.25 1-3/4 -148 122.21 23 0.9055 -023 38.86 21/64 -021 7.27 3/4 -048 27.86 2 -200 139.05 24 0.9449 -024 43.38 11/32 -022 7.82 25/32 -050 27.51 25 0.9843 -025 47.12

Packaged Steel Shim Stock

22 Pc. Large This handy shim stock comes ready packaged Diameter in dispenser cartons for easy use. Saves time, Dual-Wall waste and bother. Precision-gauged for accuracy. Heat Shrink A full hard, cold rolled, low carbon 1008-1010. Tube This is also a Branded™ Shim. Part No. Reg. Part No. Reg. Assortment Thickness 1-955- Net Price NOW! Thickness 1-955- Net Price NOW! 6" x 100" .001" -A1 $21.00 $17.85 .009" -A9 $13.90 $11.82 FEATURES: STEEL .0015 -A1X 24.95 21.21 .010 -A10 14.10 11.99 • Dual Wall. ROLLS .002 -A2 14.40 12.24 .012 -A12 13.80 11.73 • Waterproof Polyefin .0025 -A2X 15.15 12.88 .0135 -A13X 17.15 14.58 heat shrink tubes. .003 -A3 15.55 13.22 .015 -A15 13.10 11.14 • Operating Temperature: .0035 -A3X 16.60 14.11 .0165 -A16X 18.00 15.30 -49 ~ 257°F (-45 ~ 125°C). .004 -A4 14.95 12.71 .018 -A18 17.80 15.13 • Shrink Temperature: .005 -A5 13.70 11.65 .020 -A20 14.80 12.58 Starts at 158°F (70°C). SET INCLUDES: .006 -A6 12.80 10.88 .022 -A22 15.45 13.13 Ends at 248°F (120°C). • Black: .007 -A7 13.35 11.35 .025 -A25 15.85 13.47 • 3:1 Shrink Ratio. (5) 1/2" x 6" (12.7 x 152mm) .008 -A8 13.25 11.26 .031 -A31 16.65 14.15 • Maximum Electrical (2) 3/4" x 6" (19.1 x 152mm) Rating: 600 Volts. (4) 1" x 3" (25.4 x 76mm) • Red: Part No. 1-928-45209 (5) 1/2" x 6" (12.7 x 152mm) Stainless Steel Simple To Use, Reg. Net Price $29.46 (2) 3/4" x 6" (19.1 x 152mm) Easy To Store. (4) 1" x 3" (25.4 x 76mm) Tool Wrap $ 04 Permits scale-free heat treating of tool steel in 25 less time and at lower cost. Recommended for any air-hardening operation.

FEATURES: • No more carbonaceous packing to bother with. 171 Pc. • For use in any type furnace. • Promotes fast heating and cooling of tool parts. Heat Shrink • No special controls or conditions required. Tube Part No. Reg. Made of Size 1-958- Net Price SALE! Assortment Type 321 50’ Long x 12" Wide -20310 $125.00 $106.25 soft annealed .002" 50’ Long x 24" Wide -20110 220.70 187.60 stainless steel. Thickness SET INCLUDES: • Green (25) 5/64" x 1-3/16" (2 x 30mm) (7) 15/32" x 3-9/16" (12 x 90mm) Machinist • White FEATURES: Clamping Set (25) 5/64" x 1-3/16" (2 x 30mm) • UL Approved Polyefin (6) 15/64" x 2-3/8" (6 x 60mm) heat shrink tubes. • Operating Temperature: SET INCLUDES: (11) 5/16" x 3-9/16" (8 x 90mm) ° ° • Red -67 ~ 257 F (-55 ~ 125 C). • (6) T-slot Nuts (25) 5/64" x 1-3/16" (2 x 30mm) • Shrink Temperature: • (6) Flange Nuts Starts at 158°F (70°C). • (4) Coupling Nuts (8) 13/64" x 2-3/8" (5 x 60mm) ° °C) • Black Ends at 230 F (110 . • (6) Step Blocks (25) 5/64" x 1-3/16" (2 x 30mm) • 2:1 Shrink Ratio. • (6) Serrated End Clamps (10) 3/16" x 2-3/8" (4.5 x 60mm) • Maximum Electrical • (24) Studs, 4 each: (1) 25/64" x 39-3/8" (10 x 1M) Rating: 600 Volts. 3", 4", 5", 6", 7", 8" lg. • Blue Part No. 1-928-45238 (10) 5/32" x 2-3/8" (4 x 60mm) Supplied with a plastic case. (11) 23/64" x 3-9/16" (9 x 90mm) Reg. Net Price $12.62 • Yellow $ 73 Part No. 1-904-20402 $ 23 Table T-Slot Size: 5/8" (7) 23/32" x 3-9/16" (18 x 90mm) 10 Reg. Net Price $66.54 53 Stud Size: 1/2-13

22 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com TOOLROOM ACCESSORIES 400P Series™ Spark-Duty™ Drop Forged C-Clamps FEATURES: • V-grooved anvil allows secure holding of all materials including rounds, squares and flats. • Drop forged, regular duty with extra deep throat. • Innovative frame geometry for maximum strength. • Copper plated spindle and Perma-pad® are for resistance to welding spatter and corrosion, and are replaceable.

Throat Spindle Part No. Reg. Capacity Depth Diameter 1-550- Net Price SALE! 0"- 3" 2-1/2" 5/8" -14229 $25.99 $22.09 0 - 4-1/4 3-1/4 3/4 -14243 37.99 32.29 0 - 6-1/16 4-1/8 3/4 -14257 58.00 49.30 0 - 8-1/4 5 3/4 -14271 72.11 61.29 2 - 10-1/8 6 3/4 -14285 103.46 87.94

KANT-TWIST A DOVER COMPANY Vertical Handle Universal Clamps Combine The Best Features Of Hold-Down Ordinary C-Clamps & Parallel Clamps! Supplied with Toggle Clamps spindle assembly. FEATURES: • Floating jaws that always stay parallel. Height Holding • Built-in V-blocks for round or rod stock. Overall Under Overall Capacity Part No. Reg. Model Height Base Length (lbs.) 1-910- Net Price SALE! • Designed to eliminate distorting or twisting action. • Copper plated jaws & screws are ideal for welding. 201-U 2-7/8" 5/8" 2-1/8" 100 -52010 $12.41 $10.55 202 3-3/4 15/16 2-9/16 200 -52020 13.02 11.07 202-U 3-15/16 15/16 2-9/16 200 -52026 13.02 11.07 Max. Throat Rated Part No. Reg. 207-U 5-1/2 1-1/4 3-7/8 500 -52070 17.01 14.46 Size & Style Opening Depth Load 1-532- Net Price NOW! 210-U 7-1/2 1-11/16 5-1/2 750 -52100 25.44 21.62 1" T Handle 1-1/16" 1/2" 350 -401 $14.95 $13.46 2" T Handle 2 1-1/8 800 -405 18.25 16.43 -U "U" Shaped Holding Bar 3" T Handle 3 1-1/4 1500 -410X 26.25 23.63 4-1/2" D - Deep Throat 4-1/2 2-1/4 1700 -415 27.85 25.07 6" T Handle 6 2-1/8 2000 -420 41.25 37.13 6" D - Deep Throat 6 4-1/2 2000 -421 46.50 41.85 Driver Type Studs Part No. Black Oxide RiteHite Thread Length 1-903- ONLY! Finish 1/2"-13 3" -40704 $1.35 Self-Positioning 1/2-13 3-1/2 -40705 1.42 1/2-13 4 -40706 1.47 Hold Down 1/2-13 4-1/2 -40707 1.45 1/2-13 5 -40708 1.47 Clamping System 1/2-13 5-1/2 -40709 1.54 1/2-13 6 -40710 1.56 5/8-11 3 -40804 1.77 FEATURES: 5/8-11 3-1/2 -40805 1.84 • Self-positioning, single component design. 5/8-11 4 -40806 1.93 5/8-11 4-1/2 -40807 1.98 • Swivel rocker attached body - prevents loss. 5/8-11 5 -40808 2.03 • Strong, ductile iron body. 5/8-11 5-1/2 -40809 2.14 • Instant set-up and eliminates shim stock. 5/8-11 6 -40810 2.24 • Wide clamping range - instant adjustment to 5".

Model Stud Clamping Load Part No. Reg. No. Size Height Dimensions Limit (lbs.) 1-820B- Net Price SALE! Serrated 375L 3/8" 1-1/4" 1-1/8"x 3-1/2" 10,000 -049 $27.47 $24.72 500L 1/2 2-1/2 1-7/16 x 5-3/4 12,800 -050 31.71 28.54 End Clamps 625L 5/8 3-1/2 1-7/8 x 6-3/4 18,000 -051 42.06 37.85 750L 3/4 5 2-1/8 x 9 24,000 -052 65.03 58.53 1000L 1 5 2-7/8 x 11-1/8 65,000 -053 118.09 106.28 D F D F B B E Steel Step E Steel-Black Finish C Blocks C CASE HARDENED BLACK OXIDE FINISH Height Part No. Reg. A A TEETH MATCH ALL STEP BLOCKS Adj. Range 1-903- Net Price NOW! 1" WIDE Stud Size Part No. Reg. 3/4 to 1-5/8" -40102 $4.59 $3.90 A B C E 1-903- Net Price SALE! 1-1/8 to 2-1/2 -40103 6.23 5.30 2-1/2" 1-1/8" 1/2" 1/2" -30504 $9.61 $7.69 2-1/2 to 6 -40104 15.84 13.46 4 1-1/4 3/4 1/2 -30505 14.21 11.37 6 1-1/4 7/8 1/2 -30506 17.06 13.65 1-1/2" WIDE 2-1/2 1-1/4 5/8 5/8 -30507 12.15 9.72 1-3/4 to 4 -40105 11.38 9.67 4 1-1/2 3/4 5/8 -30508 16.70 13.36 2-1/2 to 6 -40106 22.24 18.90 6 1-1/2 7/8 5/8 -30509 20.11 16.09 3-1/2 to 9 -40107 40.22 34.19

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 23 MACHINERY FEATURES: High • 7.3 HP main spindle Complete with 8" 3-jaw chuck, 10" 4-jaw chuck, Precision motor, 12 speeds. steady rest and follow rest, 4-way toolpost, coolant • D1-8 camlock, 3.2" spindle bore. system with full length rear splash guard, halogen Engine • Solid one-piece cast iron base. work light, toolbox with tools, manual and parts list. • Hardened and ground gears and bedways. Lathes • Centralized lube system in headstock. Complete with • Inch dials and leadscrews. • Full-length safety foot brake. NMS-300 Digital Readout INSTALLED! Model KLS-1840G (18" x 40") Part No. Part No. 6-273-070 6-273-070-N3 $15,15000 $17,35500 FINANCE AS LOW AS FINANCE AS LOW AS $342.09/mo. $391.88/mo. CALL FOR DETAILS CALL FOR DETAILS

Model KLS-1860G (18" x 60") Part No. 17" x 40" Part No. 6-273-071 6-273-071-N3 Heavy-Duty $16,04500 $18,36500 Precision DON'T SEE THE MACHINE YOU NEED? FINANCE AS LOW AS FINANCE AS LOW AS Lathe 7-1/2 HP, Shop KBCTools.com or email us with your $362.30/mo. $414.68/mo. 230/460V, 3 PH CALL FOR DETAILS CALL FOR DETAILS specific needs at [email protected].

30" x 160" Heavy-Duty Lathe 15 HP, 230/460V, 3 PH With 4-1/2" Spindle Bore

FEATURES: COMPLETE WITH: • Center sleeve. • Precision rigid spindle • Follow rest. • Threading dial. with 3-point support. • 15" 3-jaw chuck. • Solid full-length cast iron base. • Hardened and ground • 2-way rapid • Extra wide range of inch/metric gears and splines. traverse on Apron. threading capabilities and • Hardened and ground cross • Coolant system with full adjustable feed carriage stop. slideways and bedways. length rear splash guard. • 4-position carriage stop. SPECIFICATIONS: • 4-way indexable toolpost. Swing Over Bed / Cross Slide ...... 30" / 21.3" Bed Width ...... 15.75" Width of Gap w/Faceplate ...... 11.8" Model Distance Between Centers ...... 160" HW-30160 Huge 4-1/2" Spindle Speeds (12) ...... 10-1,000 RPM Part No. 6-273-079 Spindle Bore & Thread Cutting Range 2-Way Rapid Inch (44) ...... 2-56 TPI $ 00 Traverse. Metric (39) ...... 0.5-14 mm 46,950 Spindle Bore / Nose...... 4-1/2" / D1-11 FINANCE AS LOW AS Tailstock Taper ...... 5 MT Net Weight ...... 11,330 lbs. $1,060.13/mo. Shipping Weight ...... 11,775 lbs. CALL FOR DETAILS

Large Bore Engine Lathes 10 HP, 230/460V, 3 PH FEATURES: • 10 HP main spindle motor, 12 speeds. • Safety foot brake. • Clutch style headstock. • Inch dials and leadscrews. • Jog button, 4-way rapid traverse. • D1-8 camlock, 4.12" spindle bore. • Centralized lube system in headstock. • Hardened & ground gears & bedways.

SPECIFICATIONS: Swing Over Bed ...... 22" / 26" Swing Over Cross Slide ...... 12.5 / 16.5" Swing Over Gap ...... 30" / 34" Distance Between Centers .....60" / 80" / 120" Spindle Speed (Range 12) ...... 36-1600 RPM Spindle Nose/ Spindle Bore ...... D1-8/4.12" Threads Standard (32) ...... 2-28 TPI STANDARD Threads Metric Pitch (22) ...... 1-14mm EQUIPMENT: Tailstock Quill Travel/Taper ...... 6" / 5MT • 12" 3-Jaw Chuck. • Work Light. • 1-3" Follow Rest. • Full-Length Net Weight ...... 7,480 / 8,480 / 9,650 lbs. • 16" 4-Jaw Chuck. • Standard Tools. • 4-way Tool Post Splash Guard. Shipping Weight .. 7,900 / 8,900 / 10,200 lbs. • 20" Face Plate. • 8" Steady Rest. • Thread Chasing Dial. • Coolant System.

24 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com MACHINERY FEATURES: 16" x 40" Precision • 6 HP spindle motor, 3 PH. Toolroom Lathe • 16" swing x 40" between centers. • 16 spindle speed, 45-1800 RPM. 6 HP, 230V, 3 PH • D1-6 camlock spindle with 3-point bearing support. Model • Large 2" spindle bore. GRIP-1640GH Complete with Part No. 6-269-009 $ 00 NMS-300 9,950 Digital Readout FINANCE AS LOW AS $228.85/mo. INSTALLED! CALL FOR DETAILS SPECIAL OFFER! Part No. ML-1740T 6-273-064-N3 SAVE Complete Complete with $750 with DP-500 $ 00 Installed 20,895 Part No. FINANCE AS LOW AS NMS-300 6-273-064-N5 Digital Readout $ 00 $471.81/mo. 20,145 CALL FOR DETAILS INSTALLED! WHILE SUPPLIES LAST. Model ML-1740T Part No. FEATURES: 6-269-009-N3 • Centralized lube Part No. 6-273-064 system in headstock. $ 00 $ 00 • Hardened and ground 18,450 11,495 gears and bedways. FINANCE AS LOW AS FINANCE AS LOW AS • 12 speeds (36-1,800 RPM). $264.39/mo. • Heavy-duty 2-speed tailstock. $416.60/mo. CALL FOR DETAILS • D1-6 camlock, 3-1/8" spindle bore. CALL FOR DETAILS

13" x 40" Precision Toolroom Lathe 2 HP, 230V, 1 PH FEATURES: • 13" swing x 40" between centers. • 8 spindle speeds, 70-2000 RPM. • D1-4 spindle mount, 1-1/2" bore. • Floor model with full-length rear guard. • All gear head, hardened and ground ways. Complete with

NMS-300 Digital Readout Model INSTALLED! GRIP-1340G Part No. Part No. 6-269-008 6-269-008-N3 $5,51500 $7,24000 FINANCE AS LOW AS FINANCE AS LOW AS $126.85/mo. $166.52/mo. CALL FOR DETAILS CALL FOR DETAILS

Complete with 12" x 36" Precision Big 4" Spindle Bore, NMS-300 or DP-700 Toolroom Clutch Spindle Drive & Digital Readout 4-Way Rapid Traverse. Lathe INSTALLED! All geared head, Part No. 6-273-067 Part No. 6-273-067-N3 hardened and $ 00 $ 00 ground ways. Model 21,200 24,075 KLS-2260C FINANCE AS LOW AS FINANCE AS LOW AS Model (22" x 60") $478.70/mo. $543.61/mo. GRIP-1236E CALL FOR DETAILS CALL FOR DETAILS Part No. Part No. 6-273-068 Part No. 6-273-068-N3 6-660-010 $ 00 Model $22,46000 $24,97500 4,365 KLS-2280C FINANCE AS LOW AS (22" x 80") FINANCE AS LOW AS FINANCE AS LOW AS $507.15/mo. $563.94/mo. $100.40/mo. CALL FOR DETAILS CALL FOR DETAILS CALL FOR DETAILS Part No. 6-273-069 Part No. 6-273-069-N Model SPECIFICATIONS: $ 00 $ 00 Complete with Floor Stand, Spindle Speeds (9) .... 70-1,400 RPM KLS-26120C 26,430 31,020 Rear Splash Guard, 3- & 4-Jaw Swing ...... 12" (26" x 120") FINANCE AS LOW AS FINANCE AS LOW AS Chucks, Slotted Face Plate, Distance Between Centers ...... 36" Supplied with $596.79/mo. $700.43/mo. Steady & Follow Rest. Spindle Mount...... D1-4 Newall DP-700 DRO CALL FOR DETAILS CALL FOR DETAILS Bore ...... 1-1/2"

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 25 MACHINERY 9" x 16" Horizontal/ Horizontal Vertical Bandsaw Bandsaw 1-1/2 HP, 115/230V, 1 PH 3/4 HP, 115V, 1 PH

FEATURES: FEATURES: • 9" round, 3" x 16" or • Built in coolant system. 9" x 13" rectangular • Hydraulic feed control. capacity @ 90°. • 4 blade speeds. • 4 blade speeds • Portable - take this with 1" x 129" blade. machine to the job • Hydraulic feed control. and plug it in. • Built in coolant system. Model BAH-712 Model BAH-916 Part No. 6-280-005 Part No. 6-271-025 $ 00 $2,69500 1,099 SPECIFICATIONS: Spare H.S. Capacity ...... 7" • / 7" x 11" ❚ $70.00 Blade Size ...... 3/4" x 93" FREE Blade Included Value! Net Weight ...... 325 lbs. Shipping Weight ...... 400 lbs.

14" Wood/Metal 14-1/2" Capacity Vertical Bandsaw Gravity Feed 1 HP, 115V, 1 PH Vertical Saw FEATURES: • Dust chute. 1 HP, 115/230V, 1 PH • Mitre . Model • Cast iron fame. J8201K FEATURES: • Adjustable rip fence. Part No. • Accepts blades • 3/8" Bandsaw blade. 6-200-J8201K from 1/4"-3/4" wide. • Solid 1 pc. steel base. • 4 blade speeds to select from. • Conveniently located on/off switch. $ 00 • Accurate gravity feed with hydraulic • Precision ground cast iron table. 1,599 speed control and depth stop. • Rugged simple construction for easy SPECIFICATIONS: maintenance and long service life. Cutting Capacity ...... 6' Cutting Width ...... 13-1/2" Blade Size ...... 3/8" x 0.025" x 92-1/2" Model EF Table Size ...... 14" x 14" Part No. 6-398-005 Table Tilt (R x L) ...... 45o x 10o Complete with Stand Type ...... Closed $ 00 Bandsaw Blade, Speeds 5,195 Table Clamp for Stock, For Wood...... 3,300 SFPM FINANCE AS LOW AS Manual, and Parts List. For Metal ...... 39, 57, 78, 107, 142, 196, 278 SFPM $119.49/mo. Net Weight ...... 280 lbs. Shipping Weight ...... 300 lbs. CALL FOR DETAILS

9" x 49" Turret Milling Machines 10" x 54" Heavy-Duty Milling 3 HP, 230/460V, 3 PH Step Pulley Motor Machines 3 HP, 230/460V, 3 PH

SPECIFICATIONS: SPECIFICATIONS: Table Size ...... 9" x 49" Table Size ...... 10" x 54" Longitudinal Travel Manual Model ...... 35" Longitudinal Travel Manual ...... 32" Longitudinal Travel w/Power Feed ...... 31" with Power Feed ...... 28" Cross Travel / Knee Travel ...... 12" / 16" Cross & Knee Travel ...... 16" Table To Spindle min-max...... 0-18-3/4" Table to spindle min/max ...... 16-5/8" Spindle To Column at 90° ...... 6-3/4" - 18-3/4" Spindle to column at 90O ...... 5" - 22" Spindle Speeds (Var.) ...... 70 - 4,200 RPM Spindle Taper / Speed ...... R8 / 70 - 4200 RPM Spindle Taper ...... R-8 Power Quill Feeds (per rev.) . .0017/.0032/.0053 Power Quill Feeds (per rev.) ... .0017"/.0032"/.0053" 3HP Variable Quill Travel ...... 5" Quill Travel ...... 5" Speed Head! Shipping Weight ...... 3,200 lbs. Shipping Weight ...... 2,700 lbs. Model TUM-1VS Model TUM-3VS Part No. 6-265-006 Part No. 6-265-007 $ 00 $8,62000 7,700 FINANCE AS LOW AS FINANCE AS LOW AS $198.26/mo. $177.10/mo. CALL FOR DETAILS CALL FOR DETAILS SPECIAL OFFER! Complete with Part No. TUM-1VS Part No. Complete with SAVE Complete 6-265-006-N3 6-265-007-N3 $500 with DP-500 $ 00 Installed NMS-300 2-Axis $ 00 NMS-300 2-Axis Part No. 10,115 Shown with 9,195 Digital Readout Newall Digital Digital Readout FINANCE AS LOW AS 6-265-007-N5 FINANCE AS LOW AS & Table Feed $ 00 & Table Feed Readout and $211.49/mo. 8,695 $232.65/mo. KBC Table INSTALLED! CALL FOR DETAILS Feed. INSTALLED! CALL FOR DETAILS WHILE SUPPLIES LAST.

26 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com MACHINERY 18" Variable Speed Automatic Vertical Bandsaw Cycle 1 HP, 230V, 1 PH With Blade Welder 3 HP, 230/460V, 3 PH FEATURES: • Quality construction, built on a solid cast iron frame. FEATURES: • Built-in blade welder with grinder wheel, • Cast iron construction. work light, chip blower, and blade shear that • Full auto cycle. will weld blades up to the saw capacity. • 3 HP drive motor. • Fully adjustable blade guide support. • 1" bi-metal blade. • Large cast iron work tables tilt R/L & F/B. • Net Weight: • Cast iron blade wheels with rubber tires for traction 1,800 or 2,200 lbs. are mounted on shafts with taper roller bearings. • Shipping Weight: 2,000 or 2,500 lbs. SPECIFICATIONS: Cutting Height/Width ...... 10"/18" Model BS-15A Model BS-12A Blade Size (L x W) ...... 140-1/2" x 1/8" - 5/8" (15" Round Cap.) (12" Round Cap.) Table Size ...... 22-1/4" x 19-5/8" x 3/8" o Part No. 6-275-009 Part No. 6-275-007 Table Tilt (R x L & F x B) ...... 15 MODEL Dimensions (H x W x D) ...... 80" x 27.5" x 44" $ 00 $ 00 BS-15A SHOWN Cutting Speeds (Var.) ...... 82-384 FPM 13,295 10,995 Shipping Weight ...... 1,000 lbs. FINANCE AS LOW AS FINANCE AS LOW AS $305.78/mo. $252.89/mo. CALL FOR DETAILS CALL FOR DETAILS

7" x 31" Universal Vertical Milling Machine 1-1/2 HP, 115V, 1 PH

FEATURES: • Dovetail ways with adjustable tapered gibs under the table, saddle, and on the column face. • Turret head tilts to either side 90o and swivels 120o right or left. R8 taper spindle accepts all common R8 tooling, complete with drawbar. • Spindle feeds with a manually operated rapid feed lever or a fine feed handwheel. • Complete with front and rear rubber way covers. Model BAV-450 SPECIFICATIONS: Max. Distance, Spindle to Table...... 20" Part No. Model 6-395-027 Spindle Taper...... R8 Spindle Speeds (9)...... 270-3,200 RPM VM-22-R8 $ 00 Quill Diameter...... 3-3/8" Part No. 6-380-002 4,450 Quill Travel...... 3-1/8" FINANCE AS LOW AS Cross Slide Travel...... 8" $ 00 Longitudinal Travel...... 17-5/16" 4,020 /mo. $102.35 Vertical Knee Travel...... 21-1/2" FINANCE AS LOW AS CALL FOR DETAILS Table Size...... 7" x 31-1/2" Net Weight...... 960 lbs. $92.46/mo. Shipping Weight...... 1,400 lbs. CALL FOR DETAILS

10" x 54" CNC Vertical FREE With The Milling Machine Purchase 3 HP, 230/460V, 3 PH TOOLING! Of Any KBC With 3-Axis Acu-Rite G2 CNC Control Mill / DRO Package! Model TUM-3VS-G23 Part No. 6-265-006-G23 $211.49 $27,72000 Value! FINANCE AS LOW AS $625.92/mo. CALL FOR DETAILS

FEATURES: • NEW Acu-Rite G2 CNC control - Easy to learn and simple to use. • 10" x 54" hardened and ground table with precision hardened ground ways. • Control features canned cycles for all regular milling and drilling jobs, just fill-in the blanks to complete a program. • Reliable mechanical V.S. Mill head delivers full torque over entire speed range. • Heavy-duty box ways on knee and column with extra wide saddle for added rigidity. 1 YEAR PARTS REPLACEMENT WARRANTY ON MACHINE. You won't find a better value 13 Pc. Collet Set (1-519-020) 1 YEAR WARRANTY FROM ACU-RITE on a CNC knee mill with top 52 Pc. Clamp Kit (1-904-20402) ON THE G2 CNC CONTROL SYSTEM. quality Acu-Rite G2 Control! 10 Pc. End Mill Set (5-300T-050)

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 27 MACHINERY 6" x 18" Manual Surface Grinder 2 HP, 230V, 3 PH 5 Gallon Pail of FREE TM FEATURES: GRINDZAL • Cartridge spindle with ABEC-7 precision spindle bearings. Pure Synthetic Grinding 99.40 • Double "V" saddle ways, H-frame Coolant with Purchase $ column design & heavyweight. of any Surface Grinder Part No. 1-123-065 Value! • Ultra high column with 21" spindle to table. • Roller ways for smooth effortless table travel. • Oversize spindle housing & flange mount design allows heavier grinds than with other similar size machines. • Construction gives this machine exceptional rigidity. Model KGS-618M Part No. 6-273-003 $ 00 Complete with Full Coolant 8,845 System, 6" x 18" Permanent FINANCE AS LOW AS Magnetic Chuck, Grinding $203.44/mo. Wheel & Wheel Mount. CALL FOR DETAILS

3-Axis Auto Feed Surface Grinders Complete with Gear Head Drill Press Electric Chuck, 1-1/2 HP, 230V, 3 PH FEATURES: Coolant, and • 5 or 7.5 HP, 3 PH motor. Overhead Dressser. • Automatic lubrication. FEATURES: • 14" x 1-1/4" x 5" or • Up to 24" capacity spindle - table. 14" x 2" x 5" wheel. • Gear head direct-drive of spindle. • Net Weight: 4,400 lbs. • Rapid & fine manually operated quill feeds. or 6,260 lbs. • 2-speed instant reversing motor for tapping. • Shipping Weight: • X & Y table movement with graduated dials. 5,000 lbs. or 6,800 lbs. Model GHD-40 Model Part No. 6-325-015 SGS-1230AHD (12" x 30" Cap.) $ 00 Part No. 6-273-020 2,870 FINANCE AS LOW AS $ 00 $68.40/mo. 25,800 CALL FOR DETAILS FINANCE AS LOW AS $582.56/mo. SPECIFICATIONS: CALL FOR DETAILS Swing ...... 22-1/2" Column Diameter ...... 4-1/2" Table Size ...... 7-1/2" x 23-3/4" Model SGS-1640AHD Table Travel ...... 7-1/2" x 14-1/2" Spindle Travel ...... 4-3/4" (16" x 40" Cap.) Spindle Taper ...... 4 MT Part No. 6-273-025 FINANCE AS LOW AS Drilling Capacity (in mild steel)..... 1-1/2" $ 00 $874.98/mo. Spindle Speeds (6) ...... 9-1,970 RPM CALL FOR DETAILS Net Weight ...... 750 lbs. 38,750 Shipping Weight ...... 875 lbs.

10" x 20" 3-Axis Automatic 20" Disc Surface Grinder Sander/Grinder 3 HP, 230/460V, 3 PH FEATURES: FEATURES: • Heavy-duty cast • Three-axis automatic with incremental iron construction. downfeed and electronic auto crossfeed. • Hand wheel • Heavy cast iron base absorbs vibration. for raising and • Precision cartridge type lowering table. direct drive spindle (3,500 RPM). • Powerful 2 HP • Automatic lubrication. direct drive • Wheel Size: 8" x 1" x 1-1/4". motor with 3 PH. • Leveling bolts and pads. • For use on all • Net Weight: 3,696 lbs. materials; wood, • Shipping Weight: 4,300 lbs. metal, plastics, etc. • 20" solid metal disc is high speed balanced Model COMPLETE WITH: for smooth vibration KGS-1020AHD • 8" x 20" permanent free operation. Part No. 6-273-012 magnetic chuck. • Flood coolant system $ 00 with splash guards. Model DS-20 19,940 • Wheel balancing Part No. 6-150-010 FINANCE AS LOW AS base and arbor. • Table mount diamond $ 00 $450.25/mo. wheel dresser. 1,490 CALL FOR DETAILS

28 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com MACHINERY 12" Disc & 13-1/4" Oscillating 6" x 48" Belt Bench Model Heavy-Duty Drill Press 3/4 HP, 115V, 1 PH Combination Sander TWO TOOLS IN ONE! 1-1/2 HP, 115V, 1 PH Motor Serves both as a regular drill press & oscillating spindle sander. Perfect for a shop with limited space. Patented machines come with an oversized hole and reducer rings to match different Model WS1712 sanding drum sizes with the dust port. Part No. 6-397-WS1712 Model W1668 Part No. 6-397-WS1668 Complete with Tilting $70560 Table, Dust Port, Drill $39857 Chuck & Sanding Drums. FEATURES: • Precision ground cast iron tables. SPECIFICATIONS: • On/off toggle switch with safety key. Overall Height...... 38" • Shielded ball bearing construction. Spindle Travel...... 3-1/4" • Cabinet style stand with Swing...... 13-1/4" power coated paint. Drill Chuck...... 5/8" • Quick change belt release. Dust Port Size...... 2-1/4" • Heavy-duty mitre gauge. Speed Range (12)...... 250-3,050 RPM • 2" and 2-1/2" dust port. Table ...... 12-3/8" dia. / 360 2 YEAR • Net Weight: 178 lbs. Net Weight...... 120 lbs. WARRANTY • Shipping Weight: 230 lbs. Shipping Weight...... 127 lbs.

20-1/2" Floor Radial Drill Press Drill Press 3 HP, 230/460V, 3 PH 1-1/2 HP, 115/230V, 1 PH With 39" Arm FEATURES: • Hinged metal belt and pulley cover. • Quick adjustment motor mount. Complete with Box Table, • Rotating ± 45o tilting, crank-operated Coolant & Work Light. worktable with quick-release clamp. • 1/2" diameter external positive depth stop with 3-nut locking feature. • Adjustable tension spindle return spring. Model RD-1000 • Spindle supported by high quality ball bearings. Part No. 6-269-011 $ 00 Model JDP-20MF 11,495 Part No. 6-200-039 FINANCE AS LOW AS $264.39/mo. $ 00 CALL FOR DETAILS 1,189

SPECIFICATIONS: SPECIFICATIONS: Distance, Spindle Swing ...... 20-1/2" to Column...... 39.4" Max. Dist. Spindle to Table...... 29-1/8" Spindle Taper ...... 4 MT Max. Dist. Spindle to Base ...... 46-3/4" Quill Travel ...... 9-7/8" Drilling Capacity (steel)...... 1" Complete with Built-In Work Spindle Taper...... 3MT Column Diameter ...... 10" Light, T-Slot Table with Coolant Drilling Capacity ...... 1-1/2" Spindle Travel ...... 4-5/8" Voltage/Phase...... 230/460V, 3 PH Column Diameter...... 3-3/8" Through, 1/2" Capacity Drill Chuck Overall Height ...... 93" Table Size ...... 18-5/8" x 16-1/8" & Arbor, Manual Parts & List. Net Weight ...... 3,080 lbs. Net Weight ...... 288 lbs. Shipping Weight ...... 3,800 lbs. Shipping Weight ...... 375 lbs.

55 Ton 16" Heavy-Duty Complete with Wheel Cut-Off Saw Kit, On/Off Switch, Ironworker 5 HP, 230V, 3 PH 5 HP, 230V, 3 PH Manual & Parts List, and 16" Abrasive Wheel. FEATURES: Heavy-duty • Punch strippers. cast iron frame • Remote foot pedal operation. upper & lower. • Complete, fully guarded, punching system. • Low rake angle on reversible shear blades. • Fast adjusting hold down bars. SPECIFICATIONS: Spindle Speed ...... 3,000 RPM Model 55T Vise Swivel ...... 45° Part No. 6-700-215 FINANCE AS LOW AS Abrasive Wheel ...... 16" x 1" Bore Capacity (Pipe) ...... 3" $ 00 $259.88/mo. Capacity (Round Solid) ...... 2" 11,299 CALL FOR DETAILS Net Weight ...... 210 lbs. Shipping Weight ...... 258 lbs. SPECIFICATIONS: Max. Capacity...... 1-3/8" Dia. -1/2" Plate Largest Standard Punch/Die ..... 1-1/16"/1-1/4" Model COS-16 Bar Shear Rounds/Squares ...... 1-1/8" Call us for punches and dies and all Part No. 6-100-010 Flat Max. Thickness ...... 3/4" x 4" the other available accessories for Flat Max. Width ...... 1/2" x 12-3/8" x 14" these versatile machines. $ 00 Angle Shear Max. Size ...... 3" x 3" x 3/8" 835 Shipping Weight ...... 2,100 lbs.

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 29 SHOP SUPPLIES ® Serious cleaning ® 1500 Gun Vac power in the palm of your hands! Great for all types of cleaning: metal chips, Shoulder Eye plastic pellets, food crumbs, wood shavings, dirt and dust. Bolts

Part No. 1-816G-1500 Thread Shank Rated Part No. Reg. Reg. Net Price $93.49 Size Length Cap. (lbs.) 1-904- Net Price SALE! 1/4"-20 1" 500 -016 $4.10 $3.69 $ 79 5/16-18 1-1/8 900 -020 4.48 4.03 74 3/8-16 1-1/4 1,300 -024 4.57 4.11 7/16-14 1-3/8 1,800 -028 5.34 4.81 FEATURES: 1/2-13 1-1/2 2,400 -032 4.87 4.38 • 2X the power of a 5/8-11 1-3/4 4,000 -040 7.72 6.95 3/4-10 2 5,000 -048 9.96 8.96 standard shop vacuum! 7/8-9 2-1/4 7,000 -056 12.58 11.32 • 1/4" NPT optional rear air inlet. 1-8 2-1/2 9,000 -100 16.43 14.79 • Comfortable contoured trigger. • Bag easily attaches to tapered rear outlet. INCLUDES: Gun Vac®, • Internal stiffener keeps bag from sagging and wearing. 9" Crevice Tool, & High • Tapered nose accepts standard 1-1/4" Vac® accessories. Filtration Collection Bag.

600S Safety 770 Blow Gun Pistol 6-Drawer Chest Grip Blow Gun 26" Wide 600S-DL Gas struts hold lid Standard Tip open during use. Completely tamper-proof Model WCH-266BK nozzle. Designed Variable flow control Color: Black for maximum safety, and is lightweight. Part No. 1-824-235 maximum efficiency Conforms to OSHA Reg. Net Price $215.45 and lowest cost. standards for noise Supplied with 1/4" NPT female levels and less than $ 91 inlet thread and 1/8" female outlet 30 PSI dead-ended 193 thread. Conforms to OSHA standards pressure. Supplied for noise levels and less than 30 PSI with a brass reinforced inlet, 1/4" FPT. SPECIFICATIONS: dead-ended pressure. Top Tray Dimensions ..... 25.75" x 11.75" x 2.88" Overall Dimensions ...... 26" x 12" x 15.25" Part No. 1-816-001 $ 03 Part No. 1-816-014 $ 75 Capacity ...... 85 lbs. Reg. Net Price $9.45 8 Reg. Net Price $12.65 10 Weight ...... 43 lbs.

® NEBO Redline The brightest flashlight BLAST Flashlight ever created by NEBO! With 1,400 lumens of high intensity light, this must-have flashlight can throw a spectacularly bright beam over 260 meters. The BLAST is completely waterproof and ready for any weather condition. 6-Drawer Cabinet 26" Wide FEATURES: TM Part No. • Convex lens. • Signature Red Ring . SPECIFICATIONS: • Tactical edge. • Anodized aircraft-grade 1-541-6542 Overall • 4x adjustable zoon. aluminum; waterproof Reg. Net Dimensions .... 26.5" x 18" x 40.75" • Rear-positioned, (IPX7) & impact-resistant. Price $39.99 Capacity Ea. Drawer on/off button with • Powered by 6 AA (ball-bearing slides) ...... 85 lbs. Soft Touch Technology. batteries (included). $3599 Weight ...... 124 lbs. LIGHTING MODES Model WCA-266BK Run Time Viewing Mode Lumen (Hours) Distance SPECIFICATIONS: Color: Black Length Compacted ...... 7.25" High 1400 2.5 260 M Part No. 1-824-245 Medium 560 7 180 Length Extended ...... 7.75" Reg. Net Low 140 30 90 Diameter Barrel ...... 1.375" Price $445.15 Beacon 200 120 — Diameter Head ...... 1.875" Strobe 1400 6 — Weight ...... 0.95 lbs. $40064 ® Sturdy 5" x 2" casters WorkForce Rubber support up to 1,100 lbs. Air Hose Assemblies Workforce® rubber hose assemblies are designed for a wide range of industrial, construction and agricultural applications. Featuring reinforced synthetic rubber tube and cover with 14" Horizontal a synthetic yarn weave for extra strength and flexibility. Roller Material FEATURES: Support Stand • VRMA Class C medium oil resistance inner tube. • Bend restrictors reduce wear, making hose last longer. FEATURES: • A clamping mechanism on the column allows SPECIFICATIONS: for quick and easy height adjustments. Working Pressure...... 300 PSI • Chrome-plated, 2" x 14" ball-bearing roller head is Max. Burst Pressure...... 1,200 PSI designed to smoothly move up to 2,000 lbs. of flat stock. Brass NPT Fittings...... 1/4" MNPT • Locking screws provide added safety. I.D. Hose...... 3/8" • Made of heavy-duty Color ...... Red cast iron and steel. Part No. 1-549-MSH14 25’ x 3/8" 50’ x 3/8" SPECIFICATIONS: Reg. Net Price $187.00 (HRE3825RD2) (HRE3850RD2) Height ...... 23" to 38-1/2" Part No. 1-914L-001 $ 52 Part No. 1-914L-002 $ 81 Base ...... 15" x 16-1/2" $ 95 Reg. Net Price $33.55 28 Reg. Net Price $58.60 49 Weight ...... 47 lbs. 158

30 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com SHOP SUPPLIES Pro Tram Heavy Duty System Series FEATURES: Static Converters • Square the head of a milling For Light to Moderate Loads. machine quickly and easily. • To use the Pro Tram simply lower Designed especially for running three-phase 220V unit to the table and adjust the head Machine Tools & Motors on single-phase 220V power. until both indicators read the same. • Guaranteed to be equal to or better Runs motor loads only at 2/3 rated HP. than any other tramming method or HOW TO ORDER SIZE: spindle squaring device available. • The largest motor on your machine must fall within • Can be used with a sine bar or sine plate the minimum and maximum range of the converter. to adjust the head to precise angles. • Do not order a larger unit or heavy duty model • Calibration procedure accounts for thinking it will give you more horsepower. any error introduced by worn . 1/2" Shank 2.2" Indicator Faces WHEN TO USE HEAVY DUTY: • Body made from red anodized aluminum. • Heavy starting loads (lathes, • Indicator Repeatability: 0.0002" Part No. 1-811-01000 flywheel driven equipment, etc.). • Indicator Graduation: 0.001" Reg. Net Price $124.99 • Instant reversing, frequent starting, jogging. • Air compressors (motor pulley must be GUARANTEED INCLUDES: Calibration Gage, $ 49 reduced by 1/3 in diameter). 12 MONTHS AGAINST Manual Gage, and Padded Case. MANUFACTURING DEFECTS. 112 HEAVILY LOADED EQUIPMENT: • For pumps, fans, blowers, direct-drive compressors, or equipment requiring greater than 2/3 of its rated HP, you MUST USE A PHASE-A-MATICTM ROTARY CONVERTER. Maxi Torque-Rite® INCLUDES: Model No. PAM-300-H.D Model No. PAM-600-H.D Power Drawbars Filter, Regulator, H.P Range: 1 - 3 H.P Range: 3 - 5 Lubricator, Drawbar, Extra Part No. 1-835-008 Part No. 1-835-009 FEATURES: Long Air Hoses, Reg. Net Price $195.00 Reg. Net Price $250.00 • Slim line design with and All Mounting powerful air cylinder Hardware. $ 75 $ 50 delivers 40-50 ft./lbs. torque. 165 212 • Designed specifically as a power drawbar attachment. • Virtually eliminates VISORGUARD tools slipping in R8 collets on heavy cuts. FEATURES: Provides Complete • Less moving parts and • Flexbar arm permits setting of Visorguard Protection Between o-rings to ensure years at the correct height and angle for each setup. The Cutting Tool & of trouble-free service. • Flip shield up to load part and down for machining. The Operators Eyes! • Increases productivity by reducing 1 Year Limited Warranty. • Can be installed in minutes on CNC mills, tool change time to just seconds. conventional milling machines and others. • Special spring-loaded shaft makes shield stay put - no spring back. Part No. Reg. For Use With 1-541- Net Price NOW! • Wing-shaped shield protects workers at adjacent machines. • Flexbar locks rigid; has stainless aircraft-grade tension cable. R8 Spindle Mills -090 $595.00 $535.50 NST 40 Spindle Mills -095 595.00 535.50 INCLUDES: Mounting Bracket, Flexbar and All Hardware Including Mounting Hole and Thumbscrew for Attaching Coolant System. Arbor Presses DIMENSIONS: Shield Size - Delivers the heavy force needed for 16" W x 8" H riveting, squeezing, punching, bending, Flexbar Arm - and other pressing applications. 10" Length Sturdy, cast-iron construction. Removable, machined steel, 4-position anvil. Rugged Part No. 1-820-13055 steel ram is driven by a machined pinion. Reg. Net Price $175.00 Base drilled for mounting on a bench or pedestal. Max. Ram $ 50 Force Work Dimns. Weight Part No. Reg. 157 (Tons) Swing Height (SQ.) Height (lbs.) 1-549- Net Price SALE! 1.0 8" 6" 1" 11" 34 -AP10 $134.00 $113.90 2.0 10-3/8 7-7/8 1-1/4 15-1/8 70 -AP20 274.00 232.90 ® ® 3.0 11-3/4 12-1/2 1-1/2 21 135 -AP30 430.00 365.50 Yukon & Yukon XL AP10: Equipped with handwheel to perform light and quick press work. Clear Uncoated Lens Safety Glasses Peltor™ Optime™ 105 FEATURES: Over-the-Head Earmuffs • Spatula temples. • Dielectric, no metal parts. The 3M™ Peltor™ Optime™ 105 Over-the-Head Earmuffs have been developed • Rugged polycarbonate lens for effective hearing protection where noise exposures are expected to reach as filters 99.9% of harmful UV rays. high as 105 dBA. Features added mass and volume, plus a unique “double-shell” • Single lens design with integral earcup design (2 cups connected via foam inner layer) to side shields for greater orbital seal. boost the noise reduction throughout the full range of low • Wraparound style for increased angular and high frequencies. The lightweight headband works coverage and improved peripheral vision. in conjunction with earcup pivot points that tilt to • Integral brow guard and vented side shields. maximize wearer comfort. Soft, liquid & foam • Exclusive Duramass® scratch resistant coating. filled cushions help the earmuffs fit comfortably • YUKON XL: Enlarged to fit over against the head to help provide an effective regular prescription glasses. noise-blocking seal. Part No. Reg. FEATURES: Description 1-711- Net Price NOW! Part No. • "Double-shell" YUKON 1-720-1018 earcup technology. Uncoated Clear -9800 $3.06 $2.45 Reg. Net • Durable stainless steel Coated Clear -9810 3.92 3.14 Price $29.33 headband resists bending YUKON XL and warping and distributes Uncoated Clear -9800XL 3.13 2.50 $ 93 weight for a low-pressure fit. Coated Clear -9810XL 5.14 4.11 24 • NRR: 30 dB XL

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 31 FLUIDS Heavy-Duty Air Tool Small Submersible Big Wipes Lubricants Oil Filled Pump Textured, Scrub & Clean Wipes Air tools are an investment; protect them with high quality Air Tool Lubricant. Permanently Lubricated Pump FEATURES: Coilhose Air Tool Lubricant is specially • Dual sided ‘scrub & clean’ heavy-duty wipes offer formulated ISO 22 lubricant, Model 1-AT the fastest deepest clean ever – use them for just designed to prolong the life Part No. about every cleaning task. Best for cleaning hands. of air tools and accessories. 1-440-500286 • The unique combination of power cleansers targets the toughest grime to ensure the Reg. Net wipes never get stuck in your Price $102.51 muck. Upgraded 4x4 formula - contains 4 powerful cleaning $ 13 agents + 4 skin conditioners; 87 aloe vera, lanolin, vitamin E and glycerin. 1 Pint FEATURES: • Remove paint, adhesive, Part No. • 10’ cord. poly foam, gap fill, oil and One Wipe 1-816-ATL016 • 170 GPH @ 1 ft. more from hands, tools & Removes • Operates submersed. surfaces. Dermatologically It All! $ 45 • Bottom inlet has snap-off tested to be safe on hands. 8 screen for easy cleaning. • Contains 80 wipes (8 x 12") • Not recommended for aquariums, Watch Video 1 Gallon swimming pools, or fuel oil transfer. Part No. 1-485-60046 of Big Wipes Part No. • Epoxy-csoated aluminum housing. Reg. Net Price $14.99 in action @ 1-816-ATL128 • 1/4" inlet MNPT discharge, with 90° elbow KBCTools.com Reg. Net STANDARD GRADE accessory, accepts 1/2" I.D. tubing. $ 99 $ 27 o • 7’ shut-off head capability, and screened inlet. 13 Price $40.30 36 Temp. Range: 50 +

One tablet per 25 gallons LIFETIME WARRANTY Odor of coolant every week. 12" Smart ON DISK AND Designed for small sumps, WIPERS. Control 200 gallons or less. Disk Skimmer 15 tablets per tube. Most economical disk skimmer Tablets available for coolant use.

FEATURES: FEATURES: • Works best when used • Integrated Diverter™ knows the difference with Zebra Oxygenator. between tramp oil and oil in coolant. • No formaldehyde or harmful chemicals. • Heavy-duty construction. • Safer and more economical than biocides. • Continuous duty fan cooled motor. • Eliminates sump odors caused by • Saves nearly $300 versus other disk skimmers. hydrogen sulfide bacterial emissions. Model GS4H300 TWO YEAR WARRANTY Part No. 1-122-020 $ 45 Part No. 1-122-014 $ 83 ON ALL OTHER PARTS. Reg. Net Price $40.56 32 Do away with Coolant Stench! Reg. Net Price $344.50 292

Workforce® Series Multi-Purpose Super Lube® everywhere... Heavy-Duty Lever Synthetic and "no wear"! Action Grease Gun Grease

FEATURES: • Heavy-duty die cast head construction for FEATURES: maximum durability and longer service life. • Repels dirt, dust and grime. • 3-Way loading: bulk, filler nipple, cartridge. • Compatible with conventional lubricants. • Bleeder valve for purging unwanted air. • Impervious to salt water, safe in potable water. • Variable stroke allows grease delivery in • Prevents rust & corrosion while reducing friction. confined areas where short strokes and • Clean, non-toxic, non-staining, dielectric long lasting lubricant. high pressure on demand are needed. • Will not stain or harm wood, leather, rubber, plastics, fabric and paints. • Positive grip follower handle. • Operating Temperature: -45°F to +450°F. • 4-jaw coupler for better grip • USDA/NSF listed food grade lubricant NLGI-2 rated H1. 14.1 oz. Cartridge 400 gm Jar and longer service life. Part No. Part No. • Non-slip knurled barrel for better grip. Patented synthetic NLGI grade 2 heavy-duty multi-purpose 1-444-41150 1-444-41160 lubricant with Syncolon (PTFE). Synthetic base fluids and Reg. Net Reg. Net Model L1350 the addition of PTFE micro powders combine to form a Price $11.73 premium lubricant that provide long life protection against Price $11.48 Part No. 1-914L-L1350 $ 85 friction, wear, rust and corrosion. Machinery lasts longer, $ 76 $ 97 Reg. Net Price $45.70 38 downtime is reduced and productivity is increased. 9 9

TM TURRET JET "B" DIA DIA Universal Coolant "D" Mist or Flood Nozzle Coolant 1 Gallon FEATURES: "A" For mist and flood cooling. Highly • Full hemisphere of adjustment. recommended where tougher machining • Adjusts easily for accurate coolant placement. conditions require greater lubricity, • Difficult to accidentally knock out of adjustment. "E" NPT where material is very abrasive, or • Improves chip control. tool pressure is exceptionally great. • Increases tool life. "C" • Reduces setup time. Plastic Bottle • Maximum pressure of 150 PSI. Part No. 1-437-771 Dimensions Reg. Net Size Part No. Reg. Net (E) (A) (B) (C) (D) 1-541- Price/Ea. SALE! Price $44.00 1/8 NPT/BSPT .82" .63" .50" .11" -070 $9.70 $8.73 $ 60 Formula 77 for 1/4 NPT/BSPT .94 .75 .63 .15 -075 10.30 9.27 39 Tougher Service 3/8 NPT/BSPT 1.13 .88 .75 .22 -080 11.35 10.22

32 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com HAND TOOLS KLEIN TOOLS ® Ballpoint Hex L-Wrench Sets 32 Pc. Tamperproof Bit Set In Bondhex Cases with Magnetic Screwdriver

FEATURES: • Cushion-grip handle for greater torque and comfort. FEATURES: • Sturdy bit and screw holding magnet allows for • Protanium™ has 20% more screws to fit securely in place for easy use. torque in use for tighter • Includes complete tamperproof screws. It also provides bit set in block. longer wear, and has sharper corners for extra grab. BITS INCLUDED: • Tri-Wing® - 1, 2, 3, 4 BLX-9M - 9 Pc. Metric Set • Spanner - 4, 6, 8, 10 (1.5 - 10mm) • TORQ-SET® - 6, 8, 10 Part No. 1-927-32510 • Metric Hex - 2, 2.5, 3, 4, & 5mm Reg. Net Price $36.20 Part No. 1-927-10999 $ 10 ® Reg. Net Price $13.46 • TORX - T7, T8, T10, T15, T20, T25, T27, T30, T40 10 • Fraction Hex - 3/32", 7/64", 1/8", 9/64", 5/32", 3/16" $ 77 • 1/4" square to 1/4" hex adapter to drive sockets BLX-13 - 13 Pc. Inch Set 30 (.050" - 3/8") Part No. 1-927-10937 $ 42 Reg. Net Price $16.56 12 7 Pc. 3/8" Drive Hex Bit Sockets Sets Chrome Vanadium alloy steel socket base for long lasting durability and protection. ® Balldriver® T-Wrenches Inch & Metric FEATURES: • Extra long reach blades are welded into handle. • Chamfered tip allows blade to enter screw without obstruction. • Ergonomically designed cushion grip handles are color coded. • Ball tip saves time by spinning faster and can reach blind locations with ease. Angles work at 25°. • Tool stand can be wall or benchtop mounted, SAE SET INCLUDES: METRIC SET INCLUDES: keeping your tools organized and ready for use. • 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" TM • 3, 4, 5, 6, 7, 8, 10mm • ProGuard corrosion resistant dry finish • Storage Rack • Storage Rack is 5x more corrosion resistant than oxide coatings. • ProtaniumTM has 20% more torque in use for tighter screws. Part No. 1-552-CBSS0 $ 69 Part No. 1-552-CBSS1 $ 69 Also it provides longer wear, & has sharper corners for extra grab. Reg. Net Price $24.35 20 Reg. Net Price $24.35 20 8 Pc. Metric Set w/Stand Sizes: 2, 2.5, 3, 4, 5, 6, 8 & 10mm with Red Handles. Part No. 1-927-13189 Reg. Net Price $46.15 Length: 5" (125mm) $ 61 Diameter: 5/8" (16mm) 34 FEATURES: Part No. 1-805-77 10 Pc. Inch Set w/Stand • Lightweight body. Sizes: 3/32", 7/64", • Alloy steel parts for long wear. $ 35 1/8", 9/64", 5/32", 3/16", • Spring loaded - adjustable for light or heavy strokes. 19 7/32", 1/4", 5/16" & 3/8" with Yellow Handles. Part No. 1-927-13190 Triangular Reg. Net Price $55.58 Scraper $4169 FEATURES: Blade Length: 2-1/2" • For scraping, trimming and deburring Overall Length: 6-1/2" metals, tubing and other materials. Part No. 1-805-478 • Hollow-ground cutting edges stay Reg. Net Price $9.86 sharper longer and resharpen easily. • Correctly hardened and tempered triple-edge $ 87 blade, secured in wood handle with steel ferrule. 8

Letter & Figure ® Stamps Click Torque MACHINE-MADE Wrenches 3/8" Drive Figure Sets Letter Sets Torque Range: 120-960 inch/lbs. 9 Pc. 1-8992- 27 Pc. 1-8993- FEATURES: Reg. Reg. Size Part No. Net Price SALE! Net Price SALE! • Hear and feel wrench click when torque value is reached. 1/16" -004 $12.65 $10.75 $38.00 $32.30 • High-contrast dual range scale. 3/32 -006 12.65 10.75 38.00 32.30 1/8 -008 12.65 10.75 38.00 32.30 Part No. 1-909-2455 • Reversible drive chrome $ 17 vanadium steel ratchet head. 3/16 -012 15.80 13.43 47.35 40.25 Reg. Net Price $44.90 1/4 -016 18.90 16.07 56.65 48.15 38 • Durable all-steel construction 3/8 -024 27.65 23.50 82.85 70.42 Supplied with conversion with corrosion-resistant finish. 1/2 -032 41.05 34.89 123.05 104.59 table chart and storage case. • Knurled handle.

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 33 POWER / AIR TOOLS 6" Medium Rear Exhaust 4-1/2" Small Air 1/4" Collet FEATURES: SPECIFICATIONS: • Epoxy coated field windings protect • Sturdy 1/2 HP motor against abrasive dust ad metal debris. built-in power regulator. • Sealed switch keeps debris out of the • Full ball bearing construction. mechanism and extends switch life. • Service MinderTM brushes eliminate SPECIFICATIONS: guesswork by stopint the tool when Speed (Variable) ...... 20,000 RPM Part No. 1-829-5762 preventative maintenance is required. Average Air Consumption...... 3 CFM $ 60 • Spindle lock - For quick wheel changes. Weight ...... 1-1/2 lbs. Reg. Net Price $29.50 23 • Lock-on/off for extended use applications. • 2-position auxiliary handle. SPECIFICATIONS: INCLUDES: • ­Abrasive Wheel. Motor ...... 1 HP, 120V AC, 6 AMP Precision • Guard. • Auxiliary Handle. No Load Speed ...... 11,000 RPM • Flange Kit. • Spanner Wrench. Wire Cup Brush ...... 3" Spindle Thread ...... 5/8"-11" Sharpener Wire Wheel ...... 4" Part No. 1-833-1375A $ 60 Length ...... 10-1/2" Reg. Net Price $82.00 65 Weight ...... 3.75 lbs. Restore a full range INCLUDES: of bits to like-new • 180 Grit Wheel. sharpness in less • User's Guide. than 60 seconds! • Instructional DVD. FEATURES: • Custom points from 115° to 140°. • Sharpens 3/32"-3/4" high-speed steel, 3 Year Warranty! SS355-10 masonry, carbide, and TiN-coated bits. Supplied with a case. Spiral Saw Kit • Creates split-point bits from standard bits. • Adjustable Material Take-Off (MTO) - Fine-tune Model DD750X FEATURES: the sharpening process, touch-up a slightly Part No. 1-817-DD750X • Dual grip zones provide dull bit, or deep grind for a heavily damaged bit. superior comfort and control in • Quick Change diamond sharpening wheel is Reg. Net Price $154.95 horizontal and vertical positions. long-lasting and easy to replace after several • Exhaust vents direct hundred sharpenings (no tools needed). $ 95 • E-Z Align SystemTM for correct sharpening alignment. debris away from the tool. KIT INCLUDES: 139 • Bump switch quickly and conveniently • Sabercut ZipBit. powers the tool with one-hand. • Guidepoint ZipBit. • Serviceable motor brushes help extend tool life. • 1/8", 5/32", 1/4" collets. • Spiral cutting allows you to make plunge • RotoSaw spiral saw tool. 1/2" Impact cuts, freehand cuts, cut-outs and more. SPECIFICATIONS: Wrench Part No. 1-829-355 $ 64 Speed ...... 30,000 RPM Reg. Net Price $98.30 78 Motor ...... 120V, 5.5 AMP FEATURES: • Soft grip adds increased comfort during extended use. • Rocking dog type impact design good for DIY projects and general purpose applications like installing lug nuts & bolts. • Delivers 250 ft./lbs. of torque to quickly Spray Gun & Cup remove and install lug nuts and bolts. • Push button forward/reverse switch allows FEATURES: for one-handed directional changes. SPECIFICATIONS: • Dual action trigger. Speed ...... 6,000 RPM • External breather tube cup. Model TL050201AV Average SCFM ...... 5.1 • Adjustable air and paint controls. Model No. SX76 Part No. 6-399-200 Drive Size / Bolt Capacity...... 1/2" • Chrome plated head & air nozzle. $ 99 Air Pressure ...... 90 PSI • 1.3mm needle, nozzle and cap set. Part No. Reg. Net Price $58.55 40 Weight ...... 5 lbs. 1-816-035 SPECIFICATIONS: Reg. Net Air Inlet ...... 1/4" NPT Price $60.90 Air Pressure ...... 50-70 PSI Inlet Pressure ...... 60 PSI $ 72 14" Abrasive Nozzle Pressure ...... 47 PSI 48 Cut-Off Machine

FEATURES: 1/2" 20V MAX XR • Powerful 15-amp, 4 HP motor Lithium-Ion Brushless delivers maximum cutting performance in various materials. Compact Drill/Driver • Large cutting capacity up to 5". • Quick-adjust vise clamp FEATURES: for different material sizes. • DEWALT® brushless motor delivers • 45o Miter capacity with adjustable fence: up to 57% more run time over brushed. Allows for quick & accurate miter cuts • XR Li-Ion batteries with fuel gauge provide without flipping heavy material. 33% more capacity over standard packs. • Durable, lightweight design. • Compact (7.2" front to back) & lightweight (3.5 lbs.). • Oversized wheel guard. • Metal ½" ratcheting chuck for superior bit gripping strength. • All-ball-bearing construction • High speed transmission delivers 2-speed settings delivers maximum durability. (0-600/0-2,000 RPM) improving speed and torque control • Large spindle lock button: Make quick across a range fastening and drilling applications. and easy blade changes wearing gloves. • LED light with 20 second trigger release delay provides increased visibility in dark or confined spaces. SPECIFICATIONS: INCLUDES: LED placement on tool foot eliminates chuck shadows. Volts ...... 120 AC/DC • Abrasive Wheel. • Ergonomic comfort grip handle. Spindle ...... 1" • Hex Wrench. No Load Speed ..... 3,900 RPM • Vise. Part No. 1-826-DCD790D2 O KIT INCLUDES: • On-board bit holder. Reg. Net Price $312.55 Bevel Capacity ...... 45 • Kitbox. • DCD790 1/2" drill/driver. Arbor Size ...... 1" Part No. 1-828-6177-20 $ 07 • Charger. • (2) 20V MAX XR compact Length ...... 16" $ 67 Tool Weight...... 43.5 lbs. Reg. Net Price $214.20 182 • Belt hook. Li-Ion batteries (2.0Ah). 265

34 Call: 1-800-521-1740 Fax: 1-800-322-4292 Web: KBCTools.com Industrial Air Circulators 2-SPEED, 1/4 HP, 115V

C US WITH 24" BLADES FEATURES: Weight Part No. Reg. Description (lbs.) Model No. 1-822- Net Price SALE! • Motor: Permanently Lubricated, Ball Bearing, STANDARD Totally Enclosed, Pedestal Fan 73 24ACHP -015 $440.45 $352.36 Permanent Split Capacitor. Wall Mount Fan 42 24ACHW -016 339.57 271.66 • Assembled head OSCILLATING - 90O ARC OR LOCK (motor/blade/guard) and Pedestal Fan 73 24ACHPOU -019 $547.01 $437.61 mount in one UPS-able box. Wall Mount Fan 42 24ACHWOU -020 464.60 371.68 • Meets OSHA standards. WITH 30" BLADES SPECIFICATIONS: Switch ...... Pull Chain Weight Part No. Reg. Cord ...... 3 Conductor SJT Type Description (lbs.) Model No. 1-822- Net Price SALE! Blade ...... Coated Steel STANDARD Guard ...... Double Locking, Chrome Plated Pedestal Fan 78 30ACHP -017 $493.73 $394.98 Fan Head Tilt (Standard/Oscillating): Wall Mount Fan 47 30ACHW -018 369.41 295.53 Pedestal ..... 10°  or 28°  / 15°  or  OSCILLATING - 90O ARC OR LOCK Wall Mount ... 40°  or 0°  / 15°  or  Column Adjustment ...... 48-7/8" to 74-5/8" Pedestal Fan 78 30ACHPOU -021 $562.64 $450.11 Wall Mount Fan 47 30ACHWOU -022 481.65 385.32 More Information on Marley Pedestal Base ...... 27" Dia. Steel Dome Air Circulators Visit: KBCTools.com

Utility Circulators Industrial Floor 3-SPEED, 115V Circulators 3-SPEED, 115V FEATURES: FEATURES: • Mounts with one bolt or lag screw. • Sleeve bearing open drip proof • Optional wall mounting bracket. permanently lubricated. • Meets OSHA standards. • Meets OSHA standards. C US SPECIFICATIONS: SPECIFICATIONS: Motor 14"...... 1/15 HP S-Pole Motor 12" ...... 1/15 HP Motor 18" & 20"...... 1/8 HP PSC Motor 18" & 20" ...... 1/8 HP Switch ...... Pull Chain Switch ...... Rotary Cord ...... 10’ Long, 3 Conductor SJT Type Cord ...... 10’ Long, 3 Conductor SJT Type Blade...... Coated Steel Blade ...... Painted Steel Guard .... Double Locking, Chrome Plated Guards ...... Double Locking, Chrome Plated Fan Rotates ...... 360° C US Fan Head Tilt ...... 360° Blade Weight Part No. Reg. Bolt to... Work Benches, Blade Weight Part No. Reg. Model No. Size (lbs.) 1-822- Net Price SALE! Model No. Size (lbs.) 1-822- Net Price SALE! Steel Shelving, Machines, B-14 14" 13 -029 $164.81 $131.85 I-12 12" 10 -023 $103.80 $83.04 B-18 18 19 -030 181.15 144.92 Ceilings, I-Beams, I-18 18 17 -024 148.47 118.78 B-20P 20 20 -031 209.57 167.66 Wall, or Any Surface. I-20 20 20 -055 171.92 137.54

Extra Heavy Duty High Performance Air Circulators Air Circulators 2-SPEED, 1/2 HP, 120V 2-SPEED, 1/3 HP, 120V MACH Series A powerful 1/2 HP air circulator. This fan is engineered and designed for use in large, non-air FEATURES: conditioned facilities, which require general air • Motor: Permanently circulation. This fan is ideally suited for providing Lubricated, Ball Bearing, spot cooling where long aisles and production lines exist. C US Totally Enclosed, Permanent Split Capacitor. FEATURES: • Mount ships in • Motor: Permanently Lubricated, separate UPS-able box. Ball Bearing, Totally Enclosed, • Fan head (motor-blade-guard) Thermally Protected, Permanent Split Capacitor. ships in one UPS-able box. • Fan head (motor-blade-guard) ships in 1 UPS-able box. • Meets OSHA standards. C US • Mounts ship in separate UPS-able box. SPECIFICATIONS: SPECIFICATIONS: Switch ...... Heavy Duty Pull Chain Switch ...... Pull Chain Cord ...... 12' Long, 3 Conductor SJT Type Cord ...... 12’ Long, 3 Conductor SJT Type Blade ...... Coated Steel Blade ...... Coated Steel Guard...... Double Locking, Powder Coat Finish Guard ...... Double Locking, Powder Coat Finish Fan Head Tilt: Fan Head Tilt: Pedestal ...... 10°  or 28°  Pedestal ...... 10°  or 28°  Wall Mount ...... 40°  or 0°  Wall Mount ...... 40°  or 0°  Column Adjustment ...... 48-7/8" to 60" Column Adjustment ...... 48-7/8" to 60" Pedestal Base ...... 27" Diameter Steel Dome Pedestal Base ...... 27" Diameter Steel Dome WITH 24" BLADES WITH 24" BLADES Weight Part No. Reg. Weight Part No. Reg. Description Model No. (lbs.) 1-822- Net Price SALE! Description Model No. (lbs.) 1-822- Net Price SALE! Pedestal Fan 24HDHP 89 -040 $579.69 $463.75 Pedestal Fan MACH24P 88 -050 $492.31 $393.85 Wall Mount Fan 24HDHW 56 -041 495.86 396.69 Wall Mount Fan MACH24W 56 -051 360.88 288.70

WITH 30" BLADES WITH 30" BLADES Weight Part No. Reg. Weight Part No. Reg. Description Model No. (lbs.) 1-822- Net Price SALE! Description Model No. (lbs.) 1-822- Net Price SALE! Pedestal Fan 30HDHP 89 -042 $600.29 $480.23 Pedestal Fan MACH30P 88 -052 $496.57 $397.26 Wall Mount Fan 30HDHW 56 -043 515.75 412.60 Wall Mount Fan MACH30W 56 -053 390.72 312.58

Major Credit Cards Accepted: Subscribe @ KBCTools.com to Get Exclusive Email Offers. 35 GET ONE 4 LOCATIONS TO SERVE YOU! TODAY! Showroom Hours: Monday to Friday 8am - 5pm Fast, Easy Product KBC Volume 52 Search and Filtering, Master Catalog Over 860 Pages of Exclusive Web Offers, our Best Products Mobile Friendly, PLUS thousands of New Items added! Real-time Inventory, Detroit Live Chat & More! To Request a Copy U.S.A Call 1-800-521-1740 or go to KBCTools.com 6300 18 Mile Rd. . Sterling Heights, MI 48314 H E Local Calls ...... (586) 979-0500 A S Fax Main Line .. (586) 979-4292 D Q R U ART E Hours: Monday to Friday 7am - 5pm PRST. STD. U.S. POSTAGE PAID Machinery Division KBC TOOLS 6465 18 Mile Road Sterling Heights, MI 48314 6300 18 MILE ROAD Local Calls ...... (586) 731-3600 STERLING HEIGHTS, MI 48314 Fax Main Line .. (586) 731-7464

Chicago 910 Busse Road Elk Grove Village, IL 60007 Local Calls ...... (847) 758-4400 Fax Main Line .. (847) 758-4110

Los Angeles 1021 S. Placentia Ave. Fullerton, CA 92831 Local Calls ...... (714) 278-0500 Fax Main Line .. (714) 278-0505 ATTN: PURCHASING DEPARTMENT PHONE HOURS: Mon-Fri. 8am - 8pm, EST

Anything an aerosol sprays Supplied in a deluxe ® Grade "E" Certified fitted wood case. SURE SHOT sprays safer! Gage Block Sets A1000 Sprayer 36 PC. SET INCLUDES: 32 OZ. CAPACITY • (1) Block .05" • (3) Blocks 1, 2, 4" FEATURES: • (10) Blocks .1"-.1009" in .0001" Steps • Refillable & rechargeable. • (9) Blocks .101"-.109" in .001" Steps • Environmentally safe. • (9) Blocks .11"-.19" in .01" Steps • No Ozone depleting tax. • (4) Blocks .2"-.5" in 1" Steps • Working Pressure: 80-150 PSI. 81 PC. SET INCLUDES: • Do not use water or water-based • (1) Block .05" materials in steel sprayers. • (10) Blocks .1"-.1009" in .0001" Steps • Not recommended for paint. • (49) Blocks .101"-.149" in .001" Steps • (17) Blocks .15"-.95" in .05" Steps No. Part No. Reg. INCLUDES: • (4) Blocks 1"-4" in 1" Steps Pieces 2-670- Net Price SALE! • 32 oz. Steel Interior, 36 -037 $207.90 $166.32 Green Exterior Sprayer. Part No. 1-541-060 $ 60 ISO CERTIFIED. More information @ KBCTools.com 81 -084 373.65 298.92 • 2 Interchangeable Nozzles. Reg. Net Price $59.50 47

Mango II B10 4 Pc. Small Long Reach Parts Organizer Bonus Pack

INCLUDES: FEATURES: • 10 Blades. • Customizable dividers and • Model B Holder. removable trays give you • Plus a FREE versatility for your storage. Mango II handle! • Perfect for tools, bolts, Part No. 1-909-21227 $ 39 screws, tackle, parts, Reg. Net Price $24.24 crafts and many other items. 19 Part No. 1-457-300 • Organizers are easy to stack SET INCLUDES: Reg. Net Price $16.28 and store virtually anywhere. • (1) Large Organizer - 11-7/16" x 9-1/16" x 2-3/8". • Made from durable polypropylene. • (2) Small Organizers - 6-1/8" x 9-1/16 " x 2-3/8". $ 21 • Snap-shut latches. • (1) Deep Organizer - 6-1/8" x 9-1/16" x 4-1/2". 12

WEB:: PHONE: FAX: KBCTools.com 1-800-521-1740 1-800-322-4292