DOCSLIB.ORG

Most Accurate and Easier to Use Panel Saw Why Are Saw Trax Vertical Panel Saws More Accurate and Easier to Use?

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Most Accurate and Easier to Use Panel Saw Why Are Saw Trax Vertical Panel Saws More Accurate and Easier to Use? Most Accurate and Easier to Use Panel Saw Why are Saw Trax Vertical Panel Saws More Accurate and Easier to Use? Whether you call it a Wall Saw, Sheet Saw or Vertical Panel Saw, these machines are inherently safer than table saws. The blade is shielded away from the user so hand to blade contact is very difficult. The needed floor space to break down a sheet is reduced since the sheets are cut on their sides vs. flat. Cutting is faster and handling easier since the sheets are on their side. When considering buying a vertical panel saw, a number of considerations are the primary drivers of this choice. What panel saw is the most accurate, easy to use, at the best price. The first two determine what saw to buy, the last one determines who to buy it from. We will discuss the first two now. Accuracy is basically determined by 2 factors, Squareness of the travel of the saw to the material rollers and the play in the carriage during this travel. This assumes that the material rollers are in alignment which is not always the case with saws that individually align their material rollers. These issues are addressed by the Accu-Square, Accu- Fence and Accu-Glide features of the panel saw. Our squaring system is called Accu-Square. It is an indexed alignment system that is patented. It is used to easily square the panel saw guide tubes to the frame for a set and forget alignment system. On the center of the lower guide tube bracket you will see a series of 9 holes. These holes are spaced 9/32″ apart with the 5th hole being centered. In the frame behind it are 9 holes, spaced 8/32″ apart with the 5th hole being centered. Squaring is done by shifting the bracket in relationship to the frame in 1/32″ increments until the carriage tracks exactly 90-degrees to the material rollers. By design, only one hole in the guide tube bracket will line up with one hole in the frame. Once lined up and square, a sheet metal screw acts as an alignment pin locking the bracket to the frame. In order to shift out of factory alignment, the sheet metal screw would need to be sheared. Sounds complicated but you don’t have to worry about it. All that you need to know is your panel saw will always cut square. Other saws have their adjustment at the top of the machine. When a sheet is not held against the frame when fed under the guide tubes, it hits the guide tube near the top of the frame moving the machine out of square. They provide a 3 page alignment process that includes whacking your guide tubes with a dead blow mallet and repeatedly running the saw up and down to see if you whacked it the right amount or too much. (Not very precise). There is no way to lock their bracket in place once you whacked it right so keep that dead blow mallet handy. By the way, you will also need to make an alignment tool to square their machine according to their instructions. The Accu-Fence system is used on our full-size machines to ensure the rollers of the left fence line up with the rollers on the right fence. Both fences are machined and formed at the same time. The material roller placement is what determines if they are a right or left fence. This way the fences are identical. The right fence uses a similar indexed alignment system to the Accu-Square to incrementally line up the outside of the right fence with the rollers of the left fence. It is done at the factory and is set and forget so you don’t have to worry about it. Other saws weld their fences to the frame and have to make up for the alignment issues when the welds cool. To do this, they use the outside rollers as guides and all the interior rollers are on cams so they need to be adjusted up or down to correspond with the outside rollers. According to their instructions, to align the rollers you should first remove the stand. Then, lay the machine on a table. Using a 10 ft. straight edge on their 10 ft. wide models, align all of the middle rollers up or down to align with the two outside rollers. The problem is no one makes a 10 ft. straight edge so you need to make one yourself. The Accu-Glide system uses 12 steel sealed bearings, 3 on each corner of the carriage. They are arranged 2 on top and 1 on the bottom to gently squeeze the steel guide tube ensuring a smooth and precise draw down of the saw. Other saws use a U-bolt with nylon washers as their bearing system. The problem with that system is the tighter you get them to take the play out of the carriage, the harder it is to move the carriage. Now we can talk about ease of use and the not so apparent details that make the Saw Trax panel saws more user friendly. Our dust collection uses a blade shroud brush similar to CNC routers to contain saw dust. Our vacuum hose is a larger 2.5″ diameter to allow for greater air flow combining to give exceptional dust evacuation. We provide a 12 ft. dust hose and even a hose coupler for easy attachment to your shop vacuum. Notice also that the saw’s blade guard still guards the blade when on and off the machine. They use a vinyl tube that has to be adjusted up or down to the thickness of the material being cut. When you forget to adjust it up, it gets pushed into the saw blade rendering it useless. This usually happens in the first week. They have no blade guard on their saw. If the saw is partially down when a sheet is fed from the side and contacts the blade, tooth damage could occur requiring a blade change. 1000, 2000, 3000 Series; Varisty and Signmaker’s Series Our stop can be used on either side of the panel saw frame or on the optional mid fence. It even comes with a strip bar that allows it to be used on the right side when cutting strips of material that are less than 6″ wide. With our packages, left and right tapes are included. Their stop can only be used on the left side of their machine. Our stand uses two steel legs hinged to the frame. They are cross braced and use ladder hinges to make folding easy, like a ladder. Ten lock nuts ensure parts don’t rattle loose. The legs are attached in a way that even if the ladder hinges were to come off, the leg would not allow the machine to tilt any further back. The stand is attached at the factory. Their stand is 2 pieces of angle iron attached with U bolts for their full size model. You have to attach it yourself. It has no lock nuts so the U-bolts can vibrate loose. On their compact, it seems you need 3 hands to fold their stand. One hand to hold the machine vertical, one hand to raise the telescoping arm and a third hand to pin up the telescoping arm. Our quick release carriage allows you to use other cutting tools like a router, pivoting razor knife, rolling ACM shear or glass cutter. You just pull up on two knobs on the top of the carriage and turn them 1/4 turn to lock them open. Then just rotate the cutting tool out. To lock in the new cutting tool, turn the knobs a 1/4 turn again and pins will seat into the insert locking it in place. Our philosophy is this machine is just a big jig to allow for the straight cutting of materials. By varying the cutting tool, you can get double duty out of your machine saving you money and floor space. Their comparable machines don’t allow for tool changes. The wheels for our frame are factory attached and pivot off the floor when on the stand to make the machine stable. Their frame wheels are always on the floor. Our saws dust covers have a viewing port so you can see the saw blade for cut alignment; theirs doesn’t. We use standard off-the- shelf saws with standard 7.25″saw blades. They use proprietary saws with 8″ hard to find blades. We have incorporated a “center step” for better material support of material, especially strips. Without this support, strips will fall to the floor and can bounce into the saw blade damaging them. Theirs does not have this feature. We don’t make a vertical panel saw that is easy to build, we make a vertical panel saw that is easy to use. .
Load more

Recommended publications
  • LUMBER for SALE Dimension Lumber Co
    F OR SALE NOBLE MACHINERY CO. USED EQUIPMENT • New Pallet Hawg Band Dismantler in stock IN STOCK • New Waechter Power Feed Trim Saw • Cemco 54”, 84”, 120” Vertical Borers FOR SALE • Danco 3” x 12” Roll Feed Rip Saw New arrivals to PRS used • FMC 499 Stacker machinery inventory. Pre-buy • Hazelthorn T-145 10” Wide Cant Sizer now to ensure availability. • Keystone Gang Rip with hydraulic feed • PRS Prosaw Band Dismantler AT-15…$11,150 • PRS APD-X Pallet Destacker…$22,900 • Keystone Stake Pointer • Roach Belt Conveyor- 11 ft x 20 in…$1,800 • Brewco Speed Cut Saw…$6,900 • Mid Oregon Horizontal Feed Grinder • Hytrol Belt Conveyor- 21 ft x 18 in…$2,600 • Morgan Double End Trim Saw • Cornell End Trim Saw…$10,500 • Hytrol Belt Conveyor- 11 ft x 20 in…$1,200 • Morgan Single Head Resaw • Whirlwind Up Cut Saw…$3,150 • Hazeldine J90R Double Head Notcher…$14,900 • 2013 Pallet Chief II Nailer and Stacker • Pallet Rack Starter Kits – 6 ft…$350 • Pacific Trail Mobil-cut Chain Saw 10HP 3 ph • Pallet Rack Starter Kits- 7 ft…$395 • Pallet Rack Starter Kits- 7.5 ft…$450 • Piche 4-Saw Trimmer w/conveyor • Heavy-Duty Belt Conveyor…$2,500 • Autoquip Scissor Lift…$1,850 • Smart Manual Trim Saw • PRS Recycler Single Head Pallet Dismantler…$6,500 • Smart Products Power Feed Trim Saw Jerry Lottes Parts Sales • PRS Single Head Dismantler…$7,900 Viking® Machine Parts • Industrial Resources Automatic Pallet Stacker…$8,900 • Temp Heat Control w/Fans for Kiln Viking is a Registered Trademark of Viking Eng.
    [Show full text]
  • Carpenter Department: Maintenance
    SJECCD Human Resources Office San Jose ∙ Evergreen Community College District Classified Job Description Position: Carpenter Department: Maintenance Location: District-wide Date: 2/12/2008 POSITION PURPOSE Under general supervision of Maintenance Supervisor or assigned administrator, to perform journeyman level carpentry work in the repair, construction, and alteration of wooden articles and structures; to do a variety of related construction and general maintenance tasks; and to do job related work as required. KEY DUTIES AND RESPONSIBILITIES: 1. Performs rough and finish carpentry work on wood, acrylic and other materials. 2. Performs mill and cabinet work involving construction, finishing, and repairing of buildings, structures, furniture, cabinets, and equipment. 3. Installs and repairs floors and roofs. 4. Hangs doors and adjusts door checks. 5. Installs and repairs locks. 6. Installs bookshelves, paneling, chalk boards, bulletin boards, movie screens, shelves, etc. 7. Builds concrete forms. 8. Operates a variety of tools and equipment related to the carpentry trade including planners, shapers, jointers, sanders, power saws, and other woodworking machinery. 9. Maintains tools and machinery in good working condition in a safe, clean and orderly working environment. 10. Orders necessary supplies and material such as locks, door closures, and various hardware components. 11. Inventories supplies, equipment, and prepares reports of work performed along with materials used. 12. May occasionally provide work direction to others in performance of these duties. 13. Perform general maintenance work as required, including clean up after work is completed. 14. Installs sheet rock, fire tape and mud same. 15. Performs other related duties as assigned. EMPLOYMENT STANDARD Knowledge of: 1. Methods, materials, tools and equipment used in the carpentry and woodworking trade, including both rough and finish carpentry.
    [Show full text]
  • Panel Saw Plans
    www.BobsPlans.com Panel Saw Plans This Panel Saw can be stored away in a corner of your shop when not in use and quickly set up on two saw horses when needed. It features: • Four independent Tracks that clamp to two 2x4s. • Twelve risers that keep the workpiece elevated ¾” above the tracks for saw blade clearance. • Four Panel Clamps that clamp the workpiece in position. Each Panel Clamp has a ¾” base that supports the workpiece at the same height as the risers. The risers are positioned so both sides of the workpiece are supported after the cut is made. • If your cut will be along the length of the workpiece, position the Tracks so they are equally spaced (the exact spacing is not critical). Then, position the risers so the workpiece will be supported near the cut but the risers are not in the path of the blade. • If your cut will be across the workpiece, position the two inner Tracks so one is on either side of the cut. Be sure the risers are not in the path of the cut. After the Tracks and risers are properly positioned: • Clamp the Zero Clearance Guide to the workpiece for your saw to follow. • Set your saw blade height so the blade cuts completely through the workpiece but does not touch the Tracks. When finished, simply dismantle the setup and store the components until next time they are needed. Copyright © 2005 by Robert E. Reedy All rights reserved Saw Horse Panel Saw Plans Table of Contents Materials List .................................................................................................... 1 Panel Clamp Parts Drawings ...........................................................................
    [Show full text]
  • OWNER's MANUAL and OPERATING INSTRUCTIONS
    OWNER’S MANUAL and OPERATING INSTRUCTIONS Model Pro2k If you are missing parts or have questions please contact us at: Panel Pro • 1-800-599-1655 or 763-755-1600 [email protected] www.panelpro.com A message from all of us at Panel Pro: Thank you for purchasing a Panel Pro vertical panel saw. We take pride in building these fine products in the U.S.A. Each Panel Pro product is designed to give years of dependable service. Our saws are built from the finest components we can specify, and every machine is individually assembled by our employees some of whom have been building panel saws for more than 35 years. We appreciate you purchasing our product. The employees of Panel Pro Ham Lake, Minnesota Warranty Panel Pro warrants the parts and workmanship of this tool, except for the electric motor, for one year from the date of manufacture. Panel Pro will repair or replace, at our cost, any component that is determined to be defective. Such repair or replacement is limited to providing satisfactory replacement parts from the factory. Panel Pro assumes no responsibility for making repairs on site. Any parts returned to the factory must be returned freight prepaid. All saw motors are warranted for 90 days. Panel Pro assumes no responsibility for any damage or accidents resulting from the misuse of this tool, its misapplication, or failure to follow precautionary safety measures. Panel Pro assumes no responsibility for any consequential damage or loss of production. Panel Pro will not be responsible for claims made for machines that are not used or maintained in the normal course of business, used for applications not intended, or modified in any way.
    [Show full text]
  • Saws Value-Minded Machines & Technology — Industry Leading Support
    SAWS VALUE-MINDED MACHINES & TECHNOLOGY — INDUSTRY LEADING SUPPORT. NewCNC is a leader in America’s manufacturing technology revolution. Our machines incorporate leading-edge technology and world-class service at an affordable price. Our goal is to help manufacturers become competitive by utilizing new and thoroughly proven technology. Manufacturers utilizing this technology of “mass customization” produce one unique workpiece after another, with little or no setup time. This "one piece flow" will dramatically lower labor content thereby improving your bottom line profit. The saying "Automate or Evaporate" has never been more true than today. Technology is only half of the story; the other half is people. From your first contact with our training and support personnel, you will notice a difference in attitude and ability. Be assured that your investment in NewCNC equipment includes world-class technical training in a small class size environment. Also on-the-ready is our team of technicians to answer any operational question that may arise, by phone, email or directly connected to your machine. Further, we have the backup replacement and maintenance parts needed to keep your machine in perfect working order. | 1 OUR PARTNERSHIP WITH NANXING. NANXING DONGGUAN, GUANGDONG, CHINA Nanxing (pronounced Nan Sing) is one of the premier manufacturers of woodworking machines in the world today. With millions of sq ft of state-of- the-art manufacturing and annual production of over 10,000 machines, they have the proven technology to make your company competitive in today's increasingly global environment. We are proud to announce our partnership with Nanxing, becoming their exclusive North American partner for their broad range of woodworking machines and material handling products.
    [Show full text]
  • Vertical Panel Saws Innovative Carts
    Vertical Panel Innovative Saws Carts ANYTHING OTHER THAN A SAW TRAX JUST DOESN’T CUT IT... SAW TRAX CARTS DOLLY MAX ALL TERRAIN yel-Low DOLLY SERIES VARIABLE LOADING HEIGHT PANEL EXPRESS SELF ADJUSTING SCOOP DOLLY REPLACES FORKLIFT WE DIDN’T REINVENT THE WHEEL, JUST THE DOLLY... Vertical Panel Saws Product Description: The Basic Series panel saws include only the standard equipment (see below) and Basic are ideal for cost-conscious customers. A Universal Saw Insert Plate is provided, so SERIES the user can mount nearly any 7 ¼ inch circular saw and can be inserted vertical- ly or horizontally. This series is ideal for customers that need to break down full size sheet goods that are less than 1¾ inches thick. Although basic, this panel saw model can be enhanced. Want to use a router or a utility knife in this unit? You can add a Floating Router Insert Plate or a Pivoting Universal Saw Insert Plate Knife Cutter Insert. Choose from the optional Wall Mount Kit or optional COMPACT Folding Stand for even more versatility! Our unique Accu-Glide sealed roller bearing system provides for smoother carriage action and tighter tolerances. Available Compact Model: 52” Cross Cut Model# C52B MSRP: $1399 Sealed Steel Roller Bearings Available Full Size Model: 64” Cross Cut Model# FS64B MSRP: $2399 FULL SIZE Standard Equipment: Package Includes: Optional Accessories: Patented Alignment System Powder Coated Steel Frame Saw not included Folding Stand 11 Gauge Steel Guide Tubes Universal Saw Insert Plate Transport Wheels Accu-Glide Sealed Bearing System Full Mid-Fence Quick Release Carriage System Floating Router Insert Plate Retraction Mechanism Wall Mounting System Cord Holder Full Builder’s Extensions Center Support Step Laser Pointer Rip Pointers Our patented Accu-Square alignment system assures that your Stop Bar machine will never go out of square.
    [Show full text]
  • Coquille Estuary Climate Change Vulnerability Assessment
    Coquille Estuary Climate Change Vulnerability Assessment January 2014 Coquille Estuary Climate Change Vulnerability Assessment Eric Mielbrecht, EcoAdapt Jeff Weber, Oregon Coastal Management Program Chris Swenson, U.S. Fish and Wildlife Service David Patte, U.S. Fish and Wildlife Service Steve Denney, The Nature Conservancy January 2014 1 This project is dedicated to Kristle Volin, who worked tirelessly to help the Coquille River estuary remain beautiful for all to enjoy Special thanks to Nicholas Jones, Rich Young and Dan Uthman for their expertise in SLAMM, GIS, and cartography This project was generously funded by the U.S. Fish and Wildlife Service through the North Pacific Landscape Conservation Cooperative. It could not have been completed without significant contributions from project partners including TNC, the Coquille Watershed Association, the Oregon Department of Fish and Wildlife, and the South Slough National Estuarine Research Reserve. 2 Table of Contents Page Preface 5 Overview and Findings 7 Section 1: Project Approach and Methodology 13 Section 2: Key Habitats and Species Considered 17 Section 3: Local Climate Change Projection and Exposure Summary 29 Section 4: Assessment of Habitat Vulnerability 37 Section 5: Assessment of Species Vulnerability 61 Bibliography 75 Appendices (under separate cover) Appendix A: Project Expert Panel Participants Appendix B: Information Sent to Participants Prior to Expert Panel Meeting Appendix C: Habitat and Species Vulnerability Assessment Worksheets Used by Expert Panel Appendix D: Crosswalk Table: Relationships of Habitat Classifications Appendix E: Historical Wetland Map of Coquille Estuary 3 4 Preface Return to contents The motivation for this project was a desire to pilot a method for assessing climate change vulnerability at a local, sub-watershed level, with a goal of providing useful management information to local natural resource managers and stakeholders.
    [Show full text]
  • The Design Development of the Sliding Table Saw Towards Improving Its Dynamic Properties
    applied sciences Review The Design Development of the Sliding Table Saw Towards Improving Its Dynamic Properties Kazimierz A. Orlowski 1,* , Przemyslaw Dudek 2, Daniel Chuchala 1 , Wojciech Blacharski 1 and Tomasz Przybylinski 3 1 Department of Manufacturing and Production Engineering, Faculty of Mechanical Engineering, Gdansk University of Technology, 80-233 Gdansk, Poland; [email protected] (D.C.); [email protected] (W.B.) 2 Rema S.A., 11-440 Reszel, Poland; [email protected] 3 Institute of Fluid-Flow Machinery, Polish Academy of Sciences, 80-233 Gdansk, Poland; [email protected] * Correspondence: [email protected] Received: 15 September 2020; Accepted: 15 October 2020; Published: 21 October 2020 Abstract: Cutting wood with circular saws is a popular machining operation in the woodworking and furniture industries. In the latter sliding table saws (panel saws) are commonly used for cutting of medium density fiberboards (MDF), high density fiberboards (HDF), laminate veneer lumber (LVL), plywood and chipboards of different structures. The most demanded requirements for machine tools are accuracy and precision, which mainly depend on the static deformation and dynamic behavior of the machine tool under variable cutting forces. The aim of this study is to present a new holistic approach in the process of changing the sliding table saw design solutions in order to obtain a better machine tool that can compete in the contemporary machine tool market. This study presents design variants of saw spindles, the changes that increase the critical speeds of spindles, the measurement results of the dynamic properties of the main drive system, as well as the development of the machine body structure.
    [Show full text]
  • Lumber for Sale
    F OR SALE NOBLE MACHINERY CO. PALLET REPAIR BARS • Baker Deduster 3-Head • Cemco 54”, 84”, 120” Vertical Borers Dasco Style Bars • Dustvent Cyclone, 10HP • Dynaric DF-11C Strapping Machine • Hawk Pallet Dismantler Duck Bill Bars • Hendrick 8’ Vertical Panel Saw • Industrial Res. Pass One Disc Dismantler EZ Grip • Mid Oregon Horizontal Feed Grinder • Morgan Single Head Resaw • Pallet Chief II Nailer Dual Purpose • Piche 4-Saw Trimmer w/conveyor High carbon steel, flame cut head. • Smart Power Feed Trim Saw, single phase Deckboard remover. Extremely durable. • Southworth 4000 lb. Scissor Lift See our ads pages 40-41, 55 • Visionary CS-24 24” Up-Cut Saw Universal Machinery Sales • Waechter 2-Head Horizontal Resaw 855-298-8890 • Rebuilt Whirlwind Up-Cut Saws Jerry Lottes Parts Sales • Parts for FMC, Hazeldine & Morgan Viking® Machine Parts Complete Sawmill Setup. Includes: Viking is a Registered Trademark of Viking Eng. & Dev., Inc. 1-800-348-0703 Jerry Lottes, owner Sherman Gang Saw, Crosby Edger, www.noblemachine.com Ph: 704-283-1920 Corinth American Carraige, Brownell Cell: 704-221-2205 Head Saw, CMC Trim Saw, Morbark Fax: 704-283-8716 Chipper, Debarking System. Parts & Repairs For Your Nailing Machines... Contact Nate: 920-564-3123 Pallet, Wooden Box, Cable Reel & Tackless Nailers Specializing in FMC, Doig—even older Morgan & Gage machines! BUSINESS FOR SALE F.W. Morse / PVI Co. • 518-747-2017 Pallet Recycling Business in www.nailingmachineparts.com Central IN FOR SALE e-mail: [email protected] 23 yrs w/ loyal customers, $2 million annually, real estate optional, owns fleet of trucks and trailers. Send inquiries to: [email protected] NAILS W F MACHINE MASSACHUSETTS MANUFACTURER 2" x .113 screw blunt bulk pallet nail REGULAR PRICE...$27.00/CASE 50 LB.
    [Show full text]
  • A Green Company Founded S
    Case Studies HOME » CASE STUDIES » SPECIAL SEGMENTS » GREENBUILD EDITOR'S CHOICE 2015 » PANEL SPECIALISTS INC. Panel Specialists Inc. EMBED REVIEW LINK Reducing the carbon footprint and giving back to community in Temple, Texas BROCHURE Written by: Tom Faunce Produced by: Ryan Fecteau Hal Martin, Ray Schiller and Jim Wallis founded Panel Specialists Inc. (PSI) in 1990. Located in Temple, Texas, the company began as a manufacturer of decorative wall panel systems for educational institutions and non-combustible panels for the offshore marine industry. CLICK HERE TO VIEW Today, PSI is owned by Markel Ventures, a financial holding company consisting of a variety of businesses Strategic Partnership(s): dedicated to providing high-quality products and services to clients. As part of Markel Corporation, PSI embraces Kanak Exports Markel’s business philosophy recognizing honesty, fairness, talent and integrity as the keys to success. Rehau In addition to its original offerings in the institutional and marine markets, PSI began servicing the higher education and healthcare markets with furniture, decorative wall panel systems and patient room headwalls. The company LATEST EDITION ! MENU is licensed by the Architectural Woodwork Institute Quality Certification Program for Premium Grade Cabinetry and Systems. PSI is very thoughtful in choosing its raw materials, using only premium composite cores, decorative surfaces and hardware, made by the best suppliers in the U.S. and abroad. The non-toxic vermiculite used in PSI’s non-combustible marine panels is mined overseas, where it remains asbestos contaminant free. 2016 SPRING IV PSI’s products and services were put to the test recently SUBSCRIBE NOW as the company was chosen for the largest hospital renovation in the country.
    [Show full text]
  • Cat. No. No De Cat. OPERATOR's MANUAL MANUEL De L'utilisateur MANUAL Del OPERADOR
    OPERATOR'S MANUAL MANUEL de L'UTILISATEUR MANUAL del OPERADOR Cat. No. No de cat. 6480-20 6485-68 6486-68 HEAVY-DUTY 8" PANEL SAW SCIE À PANNEAU INDUSTRIELLE DE 203 mm (8") SIERRA PARA TABLEROS DE 203 mm (8") PARA SERVICIO PESADO TO REDUCE THE RISK OF INJURY, USER MUST READ OPERATOR'S MANUAL. AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE LE MANUEL DE L'UTILISATEUR. PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER EL MANUAL DEL OPERADOR. 14. Dress properly. Do not wear loose 24. Use the right tool. Do not use a tool or GENERAL SAFETY RULES clothing or jewelry. Contain long attachment to do a job for which it is not hair. Keep your hair, clothing, and recommended. For example, do not use gloves away from moving parts. a circular saw to cut tree limbs or logs. WARNING Loose clothes, jewelry, or long hair can Do not alter a tool. be caught in moving parts. When work- 25. Disconnect the plug from the power ing outdoors, wear rubber gloves and READ ALL INSTRUCTIONS source before making any adjust- insulated non-skid footwear. Keep hands ments, changing accessories, or stor- Failure to follow all instructions listed below, may result in electric shock, fi re and gloves away from moving parts. and/or serious personal injury. ing the tool. Such preventive safety mea- 15. Avoid accidental starting. Be sure sures reduce the risk of starting the tool SAVE THESE INSTRUCTIONS switch is off before plugging in. Do accidentally. not use a tool if the power switch does 26.
    [Show full text]
  • The Universal Class for Vertical Panel Saws Experience, Skill, Precision
    STANDARDSTANDARD The Universal Class for Vertical Panel Saws Experience, skill, precision Tried-and-tested over decades, it can almost be considered the VW-Beetle of the vertical panel saw sector: the Striebig STANDARD. It just keeps on sawing and sawing and sawing - in countless companies. Day after day, metre after metre, it saws a wide variety of panel materials: utmost precision and precise, accurate cuts with perfect edges every time. The Striebig STANDARD has been setting the standard in the univer- sal class for vertical saws for many years. Its flexibility and universal expansion options make it the ideal panel saw for companies of all sizes. A neat and tidy engineering solution: the cable chain for the STANDARD. It separates hose guide from power cable and will also accommodate larger quantities of cable quite easily. There is very little stress on the guided parts, the hose and the cable. After all, every little detail of the STANDARD is designed to be particu- larly durable. Functional ergonomics: STANDARD beam and control box. Perfect angular accuracy is ensured thanks to the twin interlocking of the saw beam. Our cover picture: majestic and imposing, like Geneva itself–the fountain in the Rade. Water is propelled to a height of 140 metres in split seconds STANDARD at a speed of 200 kilometres an hour. When darkness falls in the capital of international trade, the fountain is lit up to create a dazzling spectacle. Durability and stability for decades of sizing cuts Clean air in abundance Self-supporting, welded and heavily bra- ced – these have always been features of the STANDARD saw frame.
    [Show full text]