Ridgid Table Saw Dust Collection System
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
Owner's Manual & Safety Instructions
Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. 20i Visit our website at: http://www.harborfreight.com email our technical support at: [email protected] Visit our website at: http://www.harborfreight.com email our technical support at: [email protected] When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible. Copyright© 2020 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in Read this material before using this product. any shape or form without the express written consent of Harbor Freight Tools. Failure to do so can result in serious injury. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL. improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. table of contents Safety ......................................................... 2 Maintenance ............................................... 6 Specifications ............................................. 4 Parts List and Diagram ............................... 7 Setup .......................................................... 4 Warranty ..................................................... 8 Sa Operation .................................................... 4 F ety WarninG SyMBOLS anD DeFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. -
2-1/2" Complete Dust Collection Network Assembled According to the Instructions
INSTRUCTION SHEET Model No. 70259 WARNING Do not attempt to operate tool until it is completely 2-1/2" Complete Dust Collection Network assembled according to the instructions. WARNING QUESTION... Metal shavings or dust can set sawdust on fire. Collect wood materials only. Do not collect metal shavings or 1•847•780•6120 dust with anything that has metal in it. Disconnect dust collector system from any tool before working on metals. Visit us on the web at www.powertecproducts.com Remove all traces of wood dust from inside that tool’s dust traps. Remove all traces of metal shavings or dust before reconnecting the vacuum/dust collector. Put these instructions and the original sales invoice in a safe, dry place for future reference. CAUTION If using this Dust Collection Network to help keep airborne wood dust in heavy usage within acceptable limits, you IMPORTANT SAFETY INSTRUCTIONS must regularly monitor airborne dust and maintain the Dust This system is designed to be used with a vacuum cleaner/ Collection Network to avoid exceeding dust limits. Each dust extractor with at least 100 CFM. Always follow basic application is unique. The maintenance schedule must be safety precautions including the following. for the specific Dust Collection Network being used. IMPORTANT: Always ensure the dust collection network is WARNING properly grounded. If in doubt, contact an electrician. For your own safety, read and understand all warnings and SAVE ALL WARNINGS AND INSTRUCTIONS operating instructions before using any tool or equipment. FOR FUTURE REFERENCE WARNING UNPACKING Some dust created by operation of power tool contains chemicals known to the State of California to cause cancer, Refer to Figure 1 birth defects or other reproductive harm. -
AP42 Chapter 9 Reference
1 AP-42 Section Number: 9.9.1 Reference Number: 3 Title: Review Of Compliance Monitoring Programs With Respect To Grain L.I /p' Elevators, Final Report \ J Midwest Research Institute March 1980 ,. 2. .\ .#. ., .-?. , ,/ , , .. : 'I . I., .. , ,.. / MIDWEST RESEARCH..-*--*--- REVIEW OF CONPLLLYCE MONITORIXTG PXOGRAiiS WITH XESPECT TO GUIX ELEVtZORS .. \ FINAL REPORT Date Prepared: ?larch 24, 1980 ET3 Contract No. 68-01-4139. Task Xcs. 12 and 1& MRI Project Nos. 4310-i(12 and 14) EO r Division of Stationary Scurse Enforcement E.3. Environmental Protection Agency 401 14 Street, S.W. Fiashington, D .Z. ?.Ob60 Attn: Robert i. King MIDWEST RESEARCH INSTITUTE 425 VOLKER.BOULEVARD, KANSAS CITY, MISSOURI 64110 0 816 753-7600 .. I II EPA REVIEW NOTICE 1 t This report has been reviewed and approved by the Environ- mental Protection Agency. Approval does not signify that the contents necessarily reflect the views and policies of the government, nor does mention of trade names or cmr- cia1 products constitute endorsement or recommendation for i use. I I I I I I I i MRI -NORTH STAR LABORATORIES 10701 Red Circle Drive, Minnetonka. Minnesota 55343 - 612 933-7880 I MRI WASHINGTON,D.C. 20006-Suite 250,1750K Street, N.W.* 202 293-3800 REVIEW OF COMPLIANCE MONITORING PROGRAMS WITH RESPECT TO GRAIN ELEVATORS FINAL REPORT Date Prepared: March 24, 1980 EPA Contract No. 68-01-4139, Task Nos. 12 and 14 MXI Project Nos. 4310-L(12 and 14) For Division of Stationary Source Enforcement U.S. Environmental Protection Agency 401 M Street, S.W. Washington, D.C. 20460 Attn: Robert L. -
LUMBER for SALE Dimension Lumber Co
F OR SALE NOBLE MACHINERY CO. USED EQUIPMENT • New Pallet Hawg Band Dismantler in stock IN STOCK • New Waechter Power Feed Trim Saw • Cemco 54”, 84”, 120” Vertical Borers FOR SALE • Danco 3” x 12” Roll Feed Rip Saw New arrivals to PRS used • FMC 499 Stacker machinery inventory. Pre-buy • Hazelthorn T-145 10” Wide Cant Sizer now to ensure availability. • Keystone Gang Rip with hydraulic feed • PRS Prosaw Band Dismantler AT-15…$11,150 • PRS APD-X Pallet Destacker…$22,900 • Keystone Stake Pointer • Roach Belt Conveyor- 11 ft x 20 in…$1,800 • Brewco Speed Cut Saw…$6,900 • Mid Oregon Horizontal Feed Grinder • Hytrol Belt Conveyor- 21 ft x 18 in…$2,600 • Morgan Double End Trim Saw • Cornell End Trim Saw…$10,500 • Hytrol Belt Conveyor- 11 ft x 20 in…$1,200 • Morgan Single Head Resaw • Whirlwind Up Cut Saw…$3,150 • Hazeldine J90R Double Head Notcher…$14,900 • 2013 Pallet Chief II Nailer and Stacker • Pallet Rack Starter Kits – 6 ft…$350 • Pacific Trail Mobil-cut Chain Saw 10HP 3 ph • Pallet Rack Starter Kits- 7 ft…$395 • Pallet Rack Starter Kits- 7.5 ft…$450 • Piche 4-Saw Trimmer w/conveyor • Heavy-Duty Belt Conveyor…$2,500 • Autoquip Scissor Lift…$1,850 • Smart Manual Trim Saw • PRS Recycler Single Head Pallet Dismantler…$6,500 • Smart Products Power Feed Trim Saw Jerry Lottes Parts Sales • PRS Single Head Dismantler…$7,900 Viking® Machine Parts • Industrial Resources Automatic Pallet Stacker…$8,900 • Temp Heat Control w/Fans for Kiln Viking is a Registered Trademark of Viking Eng. -
Carpenter Department: Maintenance
SJECCD Human Resources Office San Jose ∙ Evergreen Community College District Classified Job Description Position: Carpenter Department: Maintenance Location: District-wide Date: 2/12/2008 POSITION PURPOSE Under general supervision of Maintenance Supervisor or assigned administrator, to perform journeyman level carpentry work in the repair, construction, and alteration of wooden articles and structures; to do a variety of related construction and general maintenance tasks; and to do job related work as required. KEY DUTIES AND RESPONSIBILITIES: 1. Performs rough and finish carpentry work on wood, acrylic and other materials. 2. Performs mill and cabinet work involving construction, finishing, and repairing of buildings, structures, furniture, cabinets, and equipment. 3. Installs and repairs floors and roofs. 4. Hangs doors and adjusts door checks. 5. Installs and repairs locks. 6. Installs bookshelves, paneling, chalk boards, bulletin boards, movie screens, shelves, etc. 7. Builds concrete forms. 8. Operates a variety of tools and equipment related to the carpentry trade including planners, shapers, jointers, sanders, power saws, and other woodworking machinery. 9. Maintains tools and machinery in good working condition in a safe, clean and orderly working environment. 10. Orders necessary supplies and material such as locks, door closures, and various hardware components. 11. Inventories supplies, equipment, and prepares reports of work performed along with materials used. 12. May occasionally provide work direction to others in performance of these duties. 13. Perform general maintenance work as required, including clean up after work is completed. 14. Installs sheet rock, fire tape and mud same. 15. Performs other related duties as assigned. EMPLOYMENT STANDARD Knowledge of: 1. Methods, materials, tools and equipment used in the carpentry and woodworking trade, including both rough and finish carpentry. -
2019 Combustible Dust Incident Report Copyright © 2020 | Dutsafetyscience.Com | All Rights Reserved
Join The Community Visit The Database Listen To The Podcast 2019 COMBUSTIBLE DUST INCIDENT REPORT COPYRIGHT © 2020 | DUTSAFETYSCIENCE.COM | ALL RIGHTS RESERVED ALUMINUM DUST EXPLOSION AT PIGMENT PLANT Jönköping, Sweden Pg. 13 NFPA 652 DHA REQUIREMENTS FOR OWNERS AND OPERATORS Featured Podcast Pg. 20 COMBUSTIBLE DUST INCIDENT DATA Jan. to Dec. 2019 Pg. 35 TABLE OF CONTENTS LETTER FROM THE AUTHOR ........................................................... 1 REPORT SUMMARY ................................................................................... 2 INCIDENT DATA Materials Involved .................................................................................... 3 Industries Involved ...................................................................................4 Equipment & Causes ................................................................................ 5 2019 OSHA Citations ................................................................................ 7 HIGHLIGHTED INCIDENTS Metal Dust Explosion at University in Beijing, China ..........................................9 Grain Silo Dust Explosion in Clinton, Iowa ......................................................... 10 Woodworking Plant Dust Explosion in Anzegem, Belgium .............................. 11 Dust Collector Explosion at Biorefinery in Cloverdale, Indiana ..................... 12 Aluminum Dust Explosion at Pigment Plant in Jönköping, Sweden ............ 13 Boiler Explosion at Pharmaceutical Facility in Andhra Pradesh, India ......... 15 Grinder Explosion -
Easy Duct Technical Manual
EASY DUCT™ TECHNICAL MANUAL THE EASY DUCT ADVANTAGE • Simple to install - No special tools or training required • Clamp-together components can be taken apart and reused • Flexible - Easily connects to existing ductwork • Components and adapters fit every system • Adjustable duct fittings simplify connections • Smooth interior surface helps prevent clogs EASY DUCT™ - TECHNICAL MANUAL EASY DUCT™ - TECHNICAL MANUAL TABLE OF CONTENTS DESCRIPTION PAGE Adjustable Nipple Assembly For Dry Application 34 Adjustable O-Ring Material 4 Air Volume Chart 37 Blast Gate (Auto) 17 Blast Gates (Manual & Energy Saving) 18-19 Bleed-In Valve 15 Branch Styles 31 Ceiling Hanging Method 23 Clamp Diagram 3 Clamp Gasketing Alternatives 4 Construction Methods 5 Diverter Valve 20 Dry System Installation 30 Elbows & Fittings 6 Engineering Specifications 1 Flanged Duct Specifications 2 Flashing (Wall & Roof) 21 Gauge Limitations 8 Gauge Upgrades For Elbows 7 Gripple Hanger System 24 High Temp Fume Or Exhaust Applications 28 In-Line Sound Silencer 26 Installing An In-Cut Or Tap-In 16 Labor Guidlines & What To Be Aware Of When Ordering 27 Leakage 10 No-Loss Stack-Head 26 Oil Mist Or Wet Application For Pipe 35 Oil Mist Or Wet Application For Installation Of Adjustable Nipple 36 Pipe Stand With Bracket Hanger 23 Reducer Styles 32 Rigid & Ultra Flex Hose 14 Rubber Flex Hose 13 Sizing A System & Cfm/Fpm Chart 11 Sizing Branches 33 Sizing Elbows & Special Components 12 Structural Integrity & Collapsibility 9 Wall Mounting 22 Wet System Installation 29 i Donaldson Torit donaldsontorit.com | 800-365-1331 1 EASY DUCT™ - TECHNICAL MANUAL EASY DUCT™ - TECHNICAL MANUAL ENGINEERING SPECIFICATIONS DUCT-WORK: All duct-work shall be of a clamp-together design using a die-formed, rolled edge in which is then joined together by a single lever clamp of similar material. -
Panel Saw Plans
www.BobsPlans.com Panel Saw Plans This Panel Saw can be stored away in a corner of your shop when not in use and quickly set up on two saw horses when needed. It features: • Four independent Tracks that clamp to two 2x4s. • Twelve risers that keep the workpiece elevated ¾” above the tracks for saw blade clearance. • Four Panel Clamps that clamp the workpiece in position. Each Panel Clamp has a ¾” base that supports the workpiece at the same height as the risers. The risers are positioned so both sides of the workpiece are supported after the cut is made. • If your cut will be along the length of the workpiece, position the Tracks so they are equally spaced (the exact spacing is not critical). Then, position the risers so the workpiece will be supported near the cut but the risers are not in the path of the blade. • If your cut will be across the workpiece, position the two inner Tracks so one is on either side of the cut. Be sure the risers are not in the path of the cut. After the Tracks and risers are properly positioned: • Clamp the Zero Clearance Guide to the workpiece for your saw to follow. • Set your saw blade height so the blade cuts completely through the workpiece but does not touch the Tracks. When finished, simply dismantle the setup and store the components until next time they are needed. Copyright © 2005 by Robert E. Reedy All rights reserved Saw Horse Panel Saw Plans Table of Contents Materials List .................................................................................................... 1 Panel Clamp Parts Drawings ........................................................................... -
OWNER's MANUAL and OPERATING INSTRUCTIONS
OWNER’S MANUAL and OPERATING INSTRUCTIONS Model Pro2k If you are missing parts or have questions please contact us at: Panel Pro • 1-800-599-1655 or 763-755-1600 [email protected] www.panelpro.com A message from all of us at Panel Pro: Thank you for purchasing a Panel Pro vertical panel saw. We take pride in building these fine products in the U.S.A. Each Panel Pro product is designed to give years of dependable service. Our saws are built from the finest components we can specify, and every machine is individually assembled by our employees some of whom have been building panel saws for more than 35 years. We appreciate you purchasing our product. The employees of Panel Pro Ham Lake, Minnesota Warranty Panel Pro warrants the parts and workmanship of this tool, except for the electric motor, for one year from the date of manufacture. Panel Pro will repair or replace, at our cost, any component that is determined to be defective. Such repair or replacement is limited to providing satisfactory replacement parts from the factory. Panel Pro assumes no responsibility for making repairs on site. Any parts returned to the factory must be returned freight prepaid. All saw motors are warranted for 90 days. Panel Pro assumes no responsibility for any damage or accidents resulting from the misuse of this tool, its misapplication, or failure to follow precautionary safety measures. Panel Pro assumes no responsibility for any consequential damage or loss of production. Panel Pro will not be responsible for claims made for machines that are not used or maintained in the normal course of business, used for applications not intended, or modified in any way. -
Saws Value-Minded Machines & Technology — Industry Leading Support
SAWS VALUE-MINDED MACHINES & TECHNOLOGY — INDUSTRY LEADING SUPPORT. NewCNC is a leader in America’s manufacturing technology revolution. Our machines incorporate leading-edge technology and world-class service at an affordable price. Our goal is to help manufacturers become competitive by utilizing new and thoroughly proven technology. Manufacturers utilizing this technology of “mass customization” produce one unique workpiece after another, with little or no setup time. This "one piece flow" will dramatically lower labor content thereby improving your bottom line profit. The saying "Automate or Evaporate" has never been more true than today. Technology is only half of the story; the other half is people. From your first contact with our training and support personnel, you will notice a difference in attitude and ability. Be assured that your investment in NewCNC equipment includes world-class technical training in a small class size environment. Also on-the-ready is our team of technicians to answer any operational question that may arise, by phone, email or directly connected to your machine. Further, we have the backup replacement and maintenance parts needed to keep your machine in perfect working order. | 1 OUR PARTNERSHIP WITH NANXING. NANXING DONGGUAN, GUANGDONG, CHINA Nanxing (pronounced Nan Sing) is one of the premier manufacturers of woodworking machines in the world today. With millions of sq ft of state-of- the-art manufacturing and annual production of over 10,000 machines, they have the proven technology to make your company competitive in today's increasingly global environment. We are proud to announce our partnership with Nanxing, becoming their exclusive North American partner for their broad range of woodworking machines and material handling products. -
Joe Radniecki, PE Project Manager
PROFESSIONAL BACKGROUND Joe Radniecki, PE Project Manager REPRESENTATIVE EXPERIENCE AIR HANDLING Kiln Pre-Heat Burner Replacements, United States Steel Corp: Responsible for the design and detailed mechanical and structural drawings and specifications for natural gas fired burner and air systems to replace the existing components and improve emissions, efficiency and throughput. Mr. Radniecki served as project manager and lead mechanical engineer. Dust Collection System Installations, United States Steel Corp: EDUCATION Complete mechanical and structural design and specifications for several Bachelor of Science in Mechanical dust collection systems to improve fugitive emissions and plant environmental conditions. Mr. Radniecki served as project manager and Engineering, University of Minnesota, lead mechanical engineer. 1990 CERTIFICATION MATERIAL HANDLING Process Safety Management Hazard Woodroom Infeed & Debarking System, Sappi Fine Paper: Analysis (HAZOP) Mr. Radniecki served as project manager responsible for replacement of woodroom infeed wood handling, deicing conveyor, and bark removal systems as part of a large mill conversion project. Responsibilities included PROFESSIONAL COURSES installation of a large electric pedestal mounted wood handling crane and (3) ASME B31.1 Power Piping Design rotary debarkers as well as significant modifications to infeed conveying and ASME B31.3 Chemical Piping Design deicing systems. EXPERIENCE Chipper and Screening System Upgrade, Sappi Fine Paper: Prior to starting at SPA in 2015, Joe Team was responsible for the installation and startup of a new 5000 tpd Radniecki had been a mechanical chipping and screening line in the company’s wood processing facility. Mr. engineer and project manager at a large Radniecki served as lead mechanical engineer as well as outage and industrial manufacturing facility (1990- startup coordinator. -
Owner S Manual
BD9:AL&-&' K6G>67A:HE::9EA6C:G$ BDJA9:GL>I=HI6C9 DLC:GHB6CJ6A ;DGBD9:AHB6CJ;68IJG:9H>C8:($%. E]dcZ/(+%,()"()-'Dca^cZIZX]c^XVaHjeedgi/iZX]"hjeedgi5h]de[dm#W^o 8DENG><=IB6G8=!'%%.7NLDD9HID8@>CI:GC6I>DC6A!>C8#G:K>H:96J<JHI!'%%.IG L6GC>C</CDEDGI>DCD;I=>HB6CJ6AB6N7:G:EGD9J8:9>C6CNH=6E:DG;DGBL>I=DJI I=:LG>II:C6EEGDK6AD;LDD9HID8@>CI:GC6I>DC6A!>C8# &&(..8G Eg^ciZY^cIV^lVc Model W1812 Variable Speed Planer/ Moulder With Stand Manual Update Phone #: (360) 734-3482 • Online Tech Support: [email protected] • Web: www.shopfox.biz Improvements to this machine were made since the manual was originally printed, and this manual update covers those changes. Keep this page with your owner's manual in case you ever need to refer to it. New and Updated Parts Added For improved shipping stability, we added an updated shipping brace system, which is shown We have added a series of parts to the Model as the numbered items in Figure 2. W1812. For increased machine safety, we added a chain guard shown as item 86 in Figure 1. For increased leadscrew stability, we added the col- 210-1 lar shown as item 95V2. 211 244 211 Updated 207 on Page 48 240V2 210-2 211 86 Updated on Page 47 211 207 95V2 Updated on Page 45 Figure 2. W1812 shipping brace system. REF PART # DESCRIPTION 86 X1812086 SAFETY GUARD 95V2 X1812095V2 COLLAR V2.10.09 207 XPN02 HEX NUT 5/16-18 210-1 XPB03 HEX BOLT 5/16-18 X 1 210-2 XPB12 HEX BOLT 5/16-18 X 1-1/4 211 XPW07 FLAT WASHER 5/16 240V2 X1812240V2 BRACKET V2.10.09 Figure 1.