DOCSLIB.ORG

Lumber for Sale

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Lumber for Sale F OR SALE NOBLE MACHINERY CO. PALLET REPAIR BARS • Baker Deduster 3-Head • Cemco 54”, 84”, 120” Vertical Borers Dasco Style Bars • Dustvent Cyclone, 10HP • Dynaric DF-11C Strapping Machine • Hawk Pallet Dismantler Duck Bill Bars • Hendrick 8’ Vertical Panel Saw • Industrial Res. Pass One Disc Dismantler EZ Grip • Mid Oregon Horizontal Feed Grinder • Morgan Single Head Resaw • Pallet Chief II Nailer Dual Purpose • Piche 4-Saw Trimmer w/conveyor High carbon steel, flame cut head. • Smart Power Feed Trim Saw, single phase Deckboard remover. Extremely durable. • Southworth 4000 lb. Scissor Lift See our ads pages 40-41, 55 • Visionary CS-24 24” Up-Cut Saw Universal Machinery Sales • Waechter 2-Head Horizontal Resaw 855-298-8890 • Rebuilt Whirlwind Up-Cut Saws Jerry Lottes Parts Sales • Parts for FMC, Hazeldine & Morgan Viking® Machine Parts Complete Sawmill Setup. Includes: Viking is a Registered Trademark of Viking Eng. & Dev., Inc. 1-800-348-0703 Jerry Lottes, owner Sherman Gang Saw, Crosby Edger, www.noblemachine.com Ph: 704-283-1920 Corinth American Carraige, Brownell Cell: 704-221-2205 Head Saw, CMC Trim Saw, Morbark Fax: 704-283-8716 Chipper, Debarking System. Parts & Repairs For Your Nailing Machines... Contact Nate: 920-564-3123 Pallet, Wooden Box, Cable Reel & Tackless Nailers Specializing in FMC, Doig—even older Morgan & Gage machines! BUSINESS FOR SALE F.W. Morse / PVI Co. • 518-747-2017 Pallet Recycling Business in www.nailingmachineparts.com Central IN FOR SALE e-mail: [email protected] 23 yrs w/ loyal customers, $2 million annually, real estate optional, owns fleet of trucks and trailers. Send inquiries to: [email protected] NAILS W F MACHINE MASSACHUSETTS MANUFACTURER 2" x .113 screw blunt bulk pallet nail REGULAR PRICE...$27.00/CASE 50 LB. QUANTITY DISCOUNTS 2" .099 BLUNT COIL...$32.00/ 9,000 Every 3 pallets, 1 free new nail gun. [email protected] • 508-943-5366 2" .099 coil 3,000/ $28.00 9,000 box TRADING POST...The largest collection of online classifieds in the industry! JULY 2017 71 peclassJuly2017.pmd 71 6/28/2017, 4:21 PM WWW.PALLETENTERPRISE.COM FOR SALE WANTED PLASTIC PALLETS BUY. SELL. TRADE. BULK BOX CARE • Plastic pallets 48x40, 45x45, 43x43 ANY PRE-OWNED REINFORCING CORNERS AND PLATES • Junk plastic pallets/dunnage PALLET EQUIPMENT! • 8 sizes available • Gaylord boxes/ open top drums Head to our website • 20 gauge galvanized • Plastic films, all grades for more deals like this one... • apply by hand or with nail gun 937-821-4020 NATIONAL END TRIM SAW [email protected] 00 Made in $4,250. the USA KLUG KORNERS 44999 WOODMAN FAX YOUR AD! www.KlugKorners.com PAW PAW MI 49079 (269) 657-6858 1-800-471-5060 “Since 1975” www.prsgroupinc.com 804/550-2181 TOLL FREE (866) 546-8864 PALLETS FOR SALE FAX YOUR AD! Assembled Canadian Pallets [email protected] 804/550-2181 Is your business hurt by the lumber duties? email: [email protected] We can ship Assembled Canadian Softwood PLASTIC WANTED Pallets directly to your facility Duty Free. New IPPC Certified Pallets Call our Sales Team at PLASTIC REVOLUTIONS Made to spec ...is a full service plastic recycler Serving Western USA 604-PALLETS (725-5387) looking for all types of used plastic scrap to recycle. Especially used plastic pallets. 410-215-2780 Emily Kelly • www.plasticrevolutions.com PALLETS WANTED + • Buying truckloads of pallets PRECISION across the southeast PERFORMANCE 1-800-763-6487 • Many sizes, new & used See what Dun-Rite can do for YOU! • 30 years of prompt payments to our supplier partners • Tooling for Single-Shaft www.atlanticpallet.com Shredders & Grinders • Reduce Tooling Costs LUMBER FOR SALE by 30 - 50% RECYCLED LUMBER • Stringers – 2way – under 40" • Proprietary Heat-Treatment • 4way – 40", 42" 44" for Extended Tooling Life Band Saw Disassembled. Price: 1/2¢ per inch. FOB Franklin, WI 53132 Cell: (414) 801-8446 PALLET COMPONENTS FOR SALE Recycled deck boards and stringers. Will cut to spec of 40” or less. See our new website at www.dun-rite.com Blue Ridge Pallet 800-209-3145 540-949-5881 ext 2 55 W Lincoln Hwy, Cortland, IL 60112 72 PALLET ENTERPRISE Find the latest bargains on the TRADING POST www.palletenterprise.com peclassJuly2017.pmd 72 6/28/2017, 4:21 PM CALL 804/550-0323 FAX: 804/550-2181 Pre-Owned Pallet Nailers: Peterson Panel Saw Morgan Baby Chop Saw Grinders: West Plains Infeed Deck Bronco Nailer SCMI Rip Saw (2) MSI Dual Trim Cut Off Saw Hammermill Schutte West Salem Vibrating Gap Nailer Sawstop Table Saw Pendu Trim Saw Rotochopper Dump Table GBN Nailer Tandem Yield Pro II Planer Precision Chop Saw West Salem Dust Collection: GBN Excaliber Saws: Band Resaw: Saws: Gang Saws: Recycling: Blower GBN Patriot Baker Resaw Brewer (2) Pallet Plater (3) Brewer Golden Eagle GBN Trailblazer Brewco 4 Head GRS-300 Gang Rip Ind Resource Hyd Denailer Deduster Rayco Edge (2) Producto Resaw Keystone PRS Resizer Cyclone (2) Viking Champion 304 West Plains Vertical Chamfers: Trace 3 Head Dismantler Timberland Deduster (2) Viking Champion 304A Saws: Cut to Length Baker (2) Notchers: Miscellaneous: Viking® Sentinel Brewer Cutoff Saw Complete Line: Hazeldine Notcher Atlas Copco Compressor Viking® Uni-Matic Brewer 4 Head Undercut Baker Scragg & Sawmill Kenwal Jackson DH Notcher Baker Efuser, Stacker & Saws: Cornell Trim Saw Line Pendu 6700P Notcher Destacker Fast Line Edger Cornell Cutoff Saw Cooper Overhead Scragg Stacker Dumpmaster Industrial Woodworking Industrial Cut off Saw ForestAll Sawmill Material Handling: Ingersoll Rand Generator Popup Saw (2) LM Verticut Package Saw Hurdle Saw Mill Conveyors (4) G-25 Pendu CutUp Line (3) Turntable Oliver T-73 Drill (2) Your #1 Source for Pallet Stackers: Lift2K Hyd Lift Table (3) Pest Heat Chamber New & Used Equipment! Pallet Chief American Hyd Lift Table (2) Pallet Dip Tank Smetco Viking Lift Table Sawdust Augur PALLET MACHINERY GROUP Board Stackers: Smetco Hyd Lift Table Sullair Compressor Office: 540-644-9220 Cornell Walking Floor Bin Wright Sharpener www.palletmachinery.com Reduce labor with an M2L or TS Stacker! Email: [email protected] ®Viking is a federal trademark owned by Viking Engineering & Development, Inc. TRADING POST...The largest collection of online classifieds in the industry! JULY 2017 73 peclassJuly2017.pmd 73 6/28/2017, 4:21 PM YOUR LUMBER SOURCE LUMBER FOR SALE Dimension Lumber Co. Mixed Hardwood Pallet Cutstock A cut above the rest. • ½" – 1" Thickness • 30" to 60" Length • 3½" – 5¾" Width • High Quality & Short Lead Times (Stringers Available in • On Time Delivery Stringer Orders Wanted Hardwood and Green Pine) • Exceptional Long-Term Working Relationships • All Boards Dedusted #2 Pallet Lumber Available at Greatly Reduced Pricing! (Heavy on 40" & 44" Lengths) Pallet Cutstock Call Todd or Lisa: 931·296·1455 • Deckboards & Stringers [email protected] • Mixed Dense Hardwoods • Aspen • Basswood Waverly Wood • Waverly, TN Notching Available PALLET STOCK FOR SALE Call: 920-842-2805 Stringers 1 1 • 1 /8 x 3 /2 x 48" #1 pine/aspen 4way Fax: 920-842-4618 Aspen, hybrid poplar, E-mail: [email protected] stringers, .60¢ ea green, .69¢ ea KDHT 1 1 11852 Hwy 32E • Suring, Wisconsin 54174 • 1 /4 x 3 /2 x 48" #1 pine/aspen 4way mixed hardwoods stringers, .68¢ ea green, .73¢ ea KDHT 1 1 3 1 /8, 1 /4, or 1 /8 thick 7 Pallet Cut Stock • 9/16” x 3 /8 x 40” #1 pine/aspen board 3.5 wide, 40-48 long • Stringers and Deck Boards .26¢ ea green Notched or un-notched • Fir & Spruce Approx. freight adders: Minnesota .02 – .04¢ • H.T. & Green Stock Wisconsin .04 – .07¢ • Illinois .05 – .09¢ Aspen Plantation LLP • Servicing the USA and Mexico Iowa, Nebraska, South Dakota .05 – .12¢ Browerville, MN • Chamfering and Notching available Also offer hardwood KDHT cutstock, www.aspenplantation.com • Quality stock and on time deliveries stringers and boards. Trimming, re- Contact our sales team at: sawing, and notching also available 218-631-6493 in common and custom sizes. 1-604-850-0220, or [email protected] Grove Wholesale Lumber FAX YOUR AD! 804/550-2181 Please call Luke for pricing. 612-532-8893 LUMBER WANTED PALLETS WANTED WANTED Cut Stock Lumber Block Can Pallets. Looking for 32" and up; 2x4, 3x4 & Decking Small Euros Wanted Pallet 44" x 56" Looking for 48, 44, 42, 40 Square: Good 31.5 x 47.5 Repairable condition. and bad #1 and #2 & 4-way Cores. Full or half loads. Call AA Pallets Call Kim, Indiana Pallet Ruma Pallet • 617-455-1184 219-484-8479 email: [email protected] (773) 536 - 3699 [email protected] NAILS Rayco Industries Inc. FASTENER DIVISION INTRODUCES HOLD-FAST PALLET NAILS Collated and Bulk All Sizes and Gauges. High Quality, Excellent Pricing and Delivery 1-800-505-7111 1-804-321-7111 email: [email protected] Rayco Your Authorized Max Distributor 74 PALLET ENTERPRISE Find the latest bargains on the TRADING POST www.palletenterprise.com peclassJuly2017.pmd 74 6/28/2017, 4:21 PM WWW.PALLETENTERPRISE.COM LUMBER FOR SALE FOR THE PAST TWENTY YEARS 1-800-393-0062 Southern Missouri Hardwood Cut Stock. High percentage oak. Rail shipments from own siding. Depend- INDUSTRIAL LUMBER SUPPLIER OF: Hardwood, Aspen, Yellow Pine, able year around. Ideally situated for Spruce & Panel Products shipments west. GARNETT WOOD Complete Reman Plants in (417) 867-5651 PRODUCTS Bristol, PA & Crewe, VA Fax 417-867-3242 CO., INC. [email protected] PALLET CUT STOCK www.lumbermenassoc.com PALLET CUT STOCK Northern Dense Hardwood & Aspen Long Term Orders Needed for: Deckboards & Stringers – Notching Available LARY UMBER C L Specialize in 28” – 36” Sagola Hardwoods, Ltd. Deckboards: CUT STOCK 1/2” • 5/8” • 3/4” For the highest quality & best prices, contact: — CUT TO LENGTH — Now Specializing in Stringers: Steve Shirkey Phone: 906/542-7200 • Fax: 906/542-3524 BOARDS 1 3 1 3 1 /4” • 1 /8” • 1 /2” • 1 /4” E-mail: [email protected] CANTS Mixed Hardwoods #1 Grade STRINGERS Markets Include: KY, IN, IL, OH, TN, MO, WV Contact: Kristina We Specialize in Dense Associated Pallet, Inc.
Load more

Recommended publications
  • LUMBER for SALE Dimension Lumber Co
    F OR SALE NOBLE MACHINERY CO. USED EQUIPMENT • New Pallet Hawg Band Dismantler in stock IN STOCK • New Waechter Power Feed Trim Saw • Cemco 54”, 84”, 120” Vertical Borers FOR SALE • Danco 3” x 12” Roll Feed Rip Saw New arrivals to PRS used • FMC 499 Stacker machinery inventory. Pre-buy • Hazelthorn T-145 10” Wide Cant Sizer now to ensure availability. • Keystone Gang Rip with hydraulic feed • PRS Prosaw Band Dismantler AT-15…$11,150 • PRS APD-X Pallet Destacker…$22,900 • Keystone Stake Pointer • Roach Belt Conveyor- 11 ft x 20 in…$1,800 • Brewco Speed Cut Saw…$6,900 • Mid Oregon Horizontal Feed Grinder • Hytrol Belt Conveyor- 21 ft x 18 in…$2,600 • Morgan Double End Trim Saw • Cornell End Trim Saw…$10,500 • Hytrol Belt Conveyor- 11 ft x 20 in…$1,200 • Morgan Single Head Resaw • Whirlwind Up Cut Saw…$3,150 • Hazeldine J90R Double Head Notcher…$14,900 • 2013 Pallet Chief II Nailer and Stacker • Pallet Rack Starter Kits – 6 ft…$350 • Pacific Trail Mobil-cut Chain Saw 10HP 3 ph • Pallet Rack Starter Kits- 7 ft…$395 • Pallet Rack Starter Kits- 7.5 ft…$450 • Piche 4-Saw Trimmer w/conveyor • Heavy-Duty Belt Conveyor…$2,500 • Autoquip Scissor Lift…$1,850 • Smart Manual Trim Saw • PRS Recycler Single Head Pallet Dismantler…$6,500 • Smart Products Power Feed Trim Saw Jerry Lottes Parts Sales • PRS Single Head Dismantler…$7,900 Viking® Machine Parts • Industrial Resources Automatic Pallet Stacker…$8,900 • Temp Heat Control w/Fans for Kiln Viking is a Registered Trademark of Viking Eng.
    [Show full text]
  • Carpenter Department: Maintenance
    SJECCD Human Resources Office San Jose ∙ Evergreen Community College District Classified Job Description Position: Carpenter Department: Maintenance Location: District-wide Date: 2/12/2008 POSITION PURPOSE Under general supervision of Maintenance Supervisor or assigned administrator, to perform journeyman level carpentry work in the repair, construction, and alteration of wooden articles and structures; to do a variety of related construction and general maintenance tasks; and to do job related work as required. KEY DUTIES AND RESPONSIBILITIES: 1. Performs rough and finish carpentry work on wood, acrylic and other materials. 2. Performs mill and cabinet work involving construction, finishing, and repairing of buildings, structures, furniture, cabinets, and equipment. 3. Installs and repairs floors and roofs. 4. Hangs doors and adjusts door checks. 5. Installs and repairs locks. 6. Installs bookshelves, paneling, chalk boards, bulletin boards, movie screens, shelves, etc. 7. Builds concrete forms. 8. Operates a variety of tools and equipment related to the carpentry trade including planners, shapers, jointers, sanders, power saws, and other woodworking machinery. 9. Maintains tools and machinery in good working condition in a safe, clean and orderly working environment. 10. Orders necessary supplies and material such as locks, door closures, and various hardware components. 11. Inventories supplies, equipment, and prepares reports of work performed along with materials used. 12. May occasionally provide work direction to others in performance of these duties. 13. Perform general maintenance work as required, including clean up after work is completed. 14. Installs sheet rock, fire tape and mud same. 15. Performs other related duties as assigned. EMPLOYMENT STANDARD Knowledge of: 1. Methods, materials, tools and equipment used in the carpentry and woodworking trade, including both rough and finish carpentry.
    [Show full text]
  • Panel Saw Plans
    www.BobsPlans.com Panel Saw Plans This Panel Saw can be stored away in a corner of your shop when not in use and quickly set up on two saw horses when needed. It features: • Four independent Tracks that clamp to two 2x4s. • Twelve risers that keep the workpiece elevated ¾” above the tracks for saw blade clearance. • Four Panel Clamps that clamp the workpiece in position. Each Panel Clamp has a ¾” base that supports the workpiece at the same height as the risers. The risers are positioned so both sides of the workpiece are supported after the cut is made. • If your cut will be along the length of the workpiece, position the Tracks so they are equally spaced (the exact spacing is not critical). Then, position the risers so the workpiece will be supported near the cut but the risers are not in the path of the blade. • If your cut will be across the workpiece, position the two inner Tracks so one is on either side of the cut. Be sure the risers are not in the path of the cut. After the Tracks and risers are properly positioned: • Clamp the Zero Clearance Guide to the workpiece for your saw to follow. • Set your saw blade height so the blade cuts completely through the workpiece but does not touch the Tracks. When finished, simply dismantle the setup and store the components until next time they are needed. Copyright © 2005 by Robert E. Reedy All rights reserved Saw Horse Panel Saw Plans Table of Contents Materials List .................................................................................................... 1 Panel Clamp Parts Drawings ...........................................................................
    [Show full text]
  • OWNER's MANUAL and OPERATING INSTRUCTIONS
    OWNER’S MANUAL and OPERATING INSTRUCTIONS Model Pro2k If you are missing parts or have questions please contact us at: Panel Pro • 1-800-599-1655 or 763-755-1600 [email protected] www.panelpro.com A message from all of us at Panel Pro: Thank you for purchasing a Panel Pro vertical panel saw. We take pride in building these fine products in the U.S.A. Each Panel Pro product is designed to give years of dependable service. Our saws are built from the finest components we can specify, and every machine is individually assembled by our employees some of whom have been building panel saws for more than 35 years. We appreciate you purchasing our product. The employees of Panel Pro Ham Lake, Minnesota Warranty Panel Pro warrants the parts and workmanship of this tool, except for the electric motor, for one year from the date of manufacture. Panel Pro will repair or replace, at our cost, any component that is determined to be defective. Such repair or replacement is limited to providing satisfactory replacement parts from the factory. Panel Pro assumes no responsibility for making repairs on site. Any parts returned to the factory must be returned freight prepaid. All saw motors are warranted for 90 days. Panel Pro assumes no responsibility for any damage or accidents resulting from the misuse of this tool, its misapplication, or failure to follow precautionary safety measures. Panel Pro assumes no responsibility for any consequential damage or loss of production. Panel Pro will not be responsible for claims made for machines that are not used or maintained in the normal course of business, used for applications not intended, or modified in any way.
    [Show full text]
  • Saws Value-Minded Machines & Technology — Industry Leading Support
    SAWS VALUE-MINDED MACHINES & TECHNOLOGY — INDUSTRY LEADING SUPPORT. NewCNC is a leader in America’s manufacturing technology revolution. Our machines incorporate leading-edge technology and world-class service at an affordable price. Our goal is to help manufacturers become competitive by utilizing new and thoroughly proven technology. Manufacturers utilizing this technology of “mass customization” produce one unique workpiece after another, with little or no setup time. This "one piece flow" will dramatically lower labor content thereby improving your bottom line profit. The saying "Automate or Evaporate" has never been more true than today. Technology is only half of the story; the other half is people. From your first contact with our training and support personnel, you will notice a difference in attitude and ability. Be assured that your investment in NewCNC equipment includes world-class technical training in a small class size environment. Also on-the-ready is our team of technicians to answer any operational question that may arise, by phone, email or directly connected to your machine. Further, we have the backup replacement and maintenance parts needed to keep your machine in perfect working order. | 1 OUR PARTNERSHIP WITH NANXING. NANXING DONGGUAN, GUANGDONG, CHINA Nanxing (pronounced Nan Sing) is one of the premier manufacturers of woodworking machines in the world today. With millions of sq ft of state-of- the-art manufacturing and annual production of over 10,000 machines, they have the proven technology to make your company competitive in today's increasingly global environment. We are proud to announce our partnership with Nanxing, becoming their exclusive North American partner for their broad range of woodworking machines and material handling products.
    [Show full text]
  • Vertical Panel Saws Innovative Carts
    Vertical Panel Innovative Saws Carts ANYTHING OTHER THAN A SAW TRAX JUST DOESN’T CUT IT... SAW TRAX CARTS DOLLY MAX ALL TERRAIN yel-Low DOLLY SERIES VARIABLE LOADING HEIGHT PANEL EXPRESS SELF ADJUSTING SCOOP DOLLY REPLACES FORKLIFT WE DIDN’T REINVENT THE WHEEL, JUST THE DOLLY... Vertical Panel Saws Product Description: The Basic Series panel saws include only the standard equipment (see below) and Basic are ideal for cost-conscious customers. A Universal Saw Insert Plate is provided, so SERIES the user can mount nearly any 7 ¼ inch circular saw and can be inserted vertical- ly or horizontally. This series is ideal for customers that need to break down full size sheet goods that are less than 1¾ inches thick. Although basic, this panel saw model can be enhanced. Want to use a router or a utility knife in this unit? You can add a Floating Router Insert Plate or a Pivoting Universal Saw Insert Plate Knife Cutter Insert. Choose from the optional Wall Mount Kit or optional COMPACT Folding Stand for even more versatility! Our unique Accu-Glide sealed roller bearing system provides for smoother carriage action and tighter tolerances. Available Compact Model: 52” Cross Cut Model# C52B MSRP: $1399 Sealed Steel Roller Bearings Available Full Size Model: 64” Cross Cut Model# FS64B MSRP: $2399 FULL SIZE Standard Equipment: Package Includes: Optional Accessories: Patented Alignment System Powder Coated Steel Frame Saw not included Folding Stand 11 Gauge Steel Guide Tubes Universal Saw Insert Plate Transport Wheels Accu-Glide Sealed Bearing System Full Mid-Fence Quick Release Carriage System Floating Router Insert Plate Retraction Mechanism Wall Mounting System Cord Holder Full Builder’s Extensions Center Support Step Laser Pointer Rip Pointers Our patented Accu-Square alignment system assures that your Stop Bar machine will never go out of square.
    [Show full text]
  • Coquille Estuary Climate Change Vulnerability Assessment
    Coquille Estuary Climate Change Vulnerability Assessment January 2014 Coquille Estuary Climate Change Vulnerability Assessment Eric Mielbrecht, EcoAdapt Jeff Weber, Oregon Coastal Management Program Chris Swenson, U.S. Fish and Wildlife Service David Patte, U.S. Fish and Wildlife Service Steve Denney, The Nature Conservancy January 2014 1 This project is dedicated to Kristle Volin, who worked tirelessly to help the Coquille River estuary remain beautiful for all to enjoy Special thanks to Nicholas Jones, Rich Young and Dan Uthman for their expertise in SLAMM, GIS, and cartography This project was generously funded by the U.S. Fish and Wildlife Service through the North Pacific Landscape Conservation Cooperative. It could not have been completed without significant contributions from project partners including TNC, the Coquille Watershed Association, the Oregon Department of Fish and Wildlife, and the South Slough National Estuarine Research Reserve. 2 Table of Contents Page Preface 5 Overview and Findings 7 Section 1: Project Approach and Methodology 13 Section 2: Key Habitats and Species Considered 17 Section 3: Local Climate Change Projection and Exposure Summary 29 Section 4: Assessment of Habitat Vulnerability 37 Section 5: Assessment of Species Vulnerability 61 Bibliography 75 Appendices (under separate cover) Appendix A: Project Expert Panel Participants Appendix B: Information Sent to Participants Prior to Expert Panel Meeting Appendix C: Habitat and Species Vulnerability Assessment Worksheets Used by Expert Panel Appendix D: Crosswalk Table: Relationships of Habitat Classifications Appendix E: Historical Wetland Map of Coquille Estuary 3 4 Preface Return to contents The motivation for this project was a desire to pilot a method for assessing climate change vulnerability at a local, sub-watershed level, with a goal of providing useful management information to local natural resource managers and stakeholders.
    [Show full text]
  • The Design Development of the Sliding Table Saw Towards Improving Its Dynamic Properties
    applied sciences Review The Design Development of the Sliding Table Saw Towards Improving Its Dynamic Properties Kazimierz A. Orlowski 1,* , Przemyslaw Dudek 2, Daniel Chuchala 1 , Wojciech Blacharski 1 and Tomasz Przybylinski 3 1 Department of Manufacturing and Production Engineering, Faculty of Mechanical Engineering, Gdansk University of Technology, 80-233 Gdansk, Poland; [email protected] (D.C.); [email protected] (W.B.) 2 Rema S.A., 11-440 Reszel, Poland; [email protected] 3 Institute of Fluid-Flow Machinery, Polish Academy of Sciences, 80-233 Gdansk, Poland; [email protected] * Correspondence: [email protected] Received: 15 September 2020; Accepted: 15 October 2020; Published: 21 October 2020 Abstract: Cutting wood with circular saws is a popular machining operation in the woodworking and furniture industries. In the latter sliding table saws (panel saws) are commonly used for cutting of medium density fiberboards (MDF), high density fiberboards (HDF), laminate veneer lumber (LVL), plywood and chipboards of different structures. The most demanded requirements for machine tools are accuracy and precision, which mainly depend on the static deformation and dynamic behavior of the machine tool under variable cutting forces. The aim of this study is to present a new holistic approach in the process of changing the sliding table saw design solutions in order to obtain a better machine tool that can compete in the contemporary machine tool market. This study presents design variants of saw spindles, the changes that increase the critical speeds of spindles, the measurement results of the dynamic properties of the main drive system, as well as the development of the machine body structure.
    [Show full text]
  • A Green Company Founded S
    Case Studies HOME » CASE STUDIES » SPECIAL SEGMENTS » GREENBUILD EDITOR'S CHOICE 2015 » PANEL SPECIALISTS INC. Panel Specialists Inc. EMBED REVIEW LINK Reducing the carbon footprint and giving back to community in Temple, Texas BROCHURE Written by: Tom Faunce Produced by: Ryan Fecteau Hal Martin, Ray Schiller and Jim Wallis founded Panel Specialists Inc. (PSI) in 1990. Located in Temple, Texas, the company began as a manufacturer of decorative wall panel systems for educational institutions and non-combustible panels for the offshore marine industry. CLICK HERE TO VIEW Today, PSI is owned by Markel Ventures, a financial holding company consisting of a variety of businesses Strategic Partnership(s): dedicated to providing high-quality products and services to clients. As part of Markel Corporation, PSI embraces Kanak Exports Markel’s business philosophy recognizing honesty, fairness, talent and integrity as the keys to success. Rehau In addition to its original offerings in the institutional and marine markets, PSI began servicing the higher education and healthcare markets with furniture, decorative wall panel systems and patient room headwalls. The company LATEST EDITION ! MENU is licensed by the Architectural Woodwork Institute Quality Certification Program for Premium Grade Cabinetry and Systems. PSI is very thoughtful in choosing its raw materials, using only premium composite cores, decorative surfaces and hardware, made by the best suppliers in the U.S. and abroad. The non-toxic vermiculite used in PSI’s non-combustible marine panels is mined overseas, where it remains asbestos contaminant free. 2016 SPRING IV PSI’s products and services were put to the test recently SUBSCRIBE NOW as the company was chosen for the largest hospital renovation in the country.
    [Show full text]
  • Cat. No. No De Cat. OPERATOR's MANUAL MANUEL De L'utilisateur MANUAL Del OPERADOR
    OPERATOR'S MANUAL MANUEL de L'UTILISATEUR MANUAL del OPERADOR Cat. No. No de cat. 6480-20 6485-68 6486-68 HEAVY-DUTY 8" PANEL SAW SCIE À PANNEAU INDUSTRIELLE DE 203 mm (8") SIERRA PARA TABLEROS DE 203 mm (8") PARA SERVICIO PESADO TO REDUCE THE RISK OF INJURY, USER MUST READ OPERATOR'S MANUAL. AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE LE MANUEL DE L'UTILISATEUR. PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER EL MANUAL DEL OPERADOR. 14. Dress properly. Do not wear loose 24. Use the right tool. Do not use a tool or GENERAL SAFETY RULES clothing or jewelry. Contain long attachment to do a job for which it is not hair. Keep your hair, clothing, and recommended. For example, do not use gloves away from moving parts. a circular saw to cut tree limbs or logs. WARNING Loose clothes, jewelry, or long hair can Do not alter a tool. be caught in moving parts. When work- 25. Disconnect the plug from the power ing outdoors, wear rubber gloves and READ ALL INSTRUCTIONS source before making any adjust- insulated non-skid footwear. Keep hands ments, changing accessories, or stor- Failure to follow all instructions listed below, may result in electric shock, fi re and gloves away from moving parts. and/or serious personal injury. ing the tool. Such preventive safety mea- 15. Avoid accidental starting. Be sure sures reduce the risk of starting the tool SAVE THESE INSTRUCTIONS switch is off before plugging in. Do accidentally. not use a tool if the power switch does 26.
    [Show full text]
  • The Universal Class for Vertical Panel Saws Experience, Skill, Precision
    STANDARDSTANDARD The Universal Class for Vertical Panel Saws Experience, skill, precision Tried-and-tested over decades, it can almost be considered the VW-Beetle of the vertical panel saw sector: the Striebig STANDARD. It just keeps on sawing and sawing and sawing - in countless companies. Day after day, metre after metre, it saws a wide variety of panel materials: utmost precision and precise, accurate cuts with perfect edges every time. The Striebig STANDARD has been setting the standard in the univer- sal class for vertical saws for many years. Its flexibility and universal expansion options make it the ideal panel saw for companies of all sizes. A neat and tidy engineering solution: the cable chain for the STANDARD. It separates hose guide from power cable and will also accommodate larger quantities of cable quite easily. There is very little stress on the guided parts, the hose and the cable. After all, every little detail of the STANDARD is designed to be particu- larly durable. Functional ergonomics: STANDARD beam and control box. Perfect angular accuracy is ensured thanks to the twin interlocking of the saw beam. Our cover picture: majestic and imposing, like Geneva itself–the fountain in the Rade. Water is propelled to a height of 140 metres in split seconds STANDARD at a speed of 200 kilometres an hour. When darkness falls in the capital of international trade, the fountain is lit up to create a dazzling spectacle. Durability and stability for decades of sizing cuts Clean air in abundance Self-supporting, welded and heavily bra- ced – these have always been features of the STANDARD saw frame.
    [Show full text]
  • Table of Contents
    Table of Contents TYPE OF SAW PREFIX CODE PAGE 22” - 30” Saws GA 26 Additional Items Various 28-30 Blind Cutting Saws NM, LTL, KC 16 Brush Cutting Saws BR 11 Chop Saws & Radial Arm Saws RA & RATH 17 Combination Saws CR 6 Conic Scoring Saws SC 5 Dado Sets/ Additional Chippers /Dado Outer Blades DA & CFP 19 Door Jamb Saws PTZ 16 Double Cut Off Saws DC 20 Edge Banders EB & VORW 6 Finger Joint Cutters & Blades FJ 22 General Purpose Saws GA, GAM, GT 7-8,10-11 Glue Joint Rip Saws GJ, GJM, GJRM 14 Groovers GV 18 Hardiplank® Polycrystalline Diamond Series PRD, PCD 20 Lucas Saws LUCAS 26 Melamine Saws LM 18 Mitre & Double Mitre Saws MD, MDC, MS 16 Multi-Score Split Saws RSMS 14 Nail Biting Saws NL 6 *NEW* “NPS” Series Panel Saws NPS 3 Non-Ferrous Cutting Saws NF 23-25 Optimizing Saws OPG, OPP 9 Panel Saws PS 3-4 Plastic Cutting Saws PP 20 Precision Trim Saws PT 12 Professional Series PR & IQ 12 Rip & Gang Saws RF, RS, RSM 13-14 Solid Surface Saws SF 18 Split Scoring Saws SS 5 Stabilizers STAB 20 Steel Cutting Saws ST 11 Strob Saw Blades U 27 Thin Rim Saws TM 15 Thin Saws TH 15 Thin Saws for Moulding ML 17 Tree Trimming Saws JARF, TREE 17 Trim Saws TS 12 Truss & Component Saws TR 21-22 Ultra Thin Saws UT 15 Terms & Conditions SALES TERMS: Prices are subject to change without notice. Orders are accepted on the basis of prices in effect on the date of order, unless specifically stated otherwise by Popular Machinery & Tools, Inc.
    [Show full text]