DOCSLIB.ORG

Greenchem Industries Chemical and Solvent Product List A-Z

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text

Load more

GreenChem Industries Chemical And Solvent Product List
A-Z

1,4-Butanediol (BDO) 2-Ethylhexanol (2-EH) 2-Ethylhexyl Acrylate (2-EHA) 911P Acetic Acid Acetone
Formic Acid, 80%, 85%, 90%, 95% Gamma Butyrolactone (GBL) Glacial Acetic Acid (GAA) Glutaraldehyde 50% Glycerin USP K & Tech Grade Glycol Ether DB
N-Butanol N-Butyl Acetate (BUTAC) N-Heptane N-Methyl Pyrrolidone (NMP) N-Propanol N-Propyl Acetate
Acetonitrile Adipic Acid
Glycol Ether DE Glycol Ether DM
Neopentyl Glycol (NPG) Nitromethane
Alpha-Methylstyrene (AMS) Asphalt Cutback

Benzoic Acid

Benzyl Alcohol USP & TECH Benzyl Chloride Boric Acid
Glycol Ether DPM Glycol Ether DPM Acetate (DPM Acetate) Glycol Ether DPnB Glycol Ether DPnP Glycol Ether EB Glycol Ether EEP Glycol Ether EM Glycol Ether EP Glycol Ether EPH Glycol Ether PM Glycol Ether PMA Glycol Ether PnB Glycol Ether PnP
Nonyl Phenol NP-9, NP-10, NP-12 Odorless Mineral Spirits (OMS) Oxalic Acid 99.6% P-Chlorbenzotrifluoride (PCBTF) Perchloroethylene (PERC) Phenol 85%, 90%, 99% Phthalic Anhydride Polyethylene Glycol (PEG) Propylene Carbonate (PC) Propylene Glycol USP (PG USP K) Propylene Glycol Industrial (PGI) Sebacic Acid
Butyl Acrylate Caustic Potash 90% Caustic Soda Flakes & Beads Citric Acid, USP Kosher

Cyclohexane

Cyclohexylamine Cylcohexanone
Glycol Ether TPM Glycolic Acid 70%
Secondary Butanol (SBA)

Sodium Laurel Sulfate (SLES) 28%, 60%, 70%

Solv 100 Solv 150 Solv 200
D-Limonene DB Acetate
GreenCool (Inhibited Glycols) Hexane Hexylene Glycol (HG) Hydrochloric Acid (HCL) Isobutanol (IBA) Isobutyl Acetate Isooctane Isopar L Isopar M Isophorone Isophthalic Acid Isopropyl Acetate Isopropyl Alcohol (IPA) Itaconic Acid
Diacetone Alcohol (DAA) Dibasic Ester (DBE) Dibutyl Phthalate (DBP)

Dibutylamine

Dicylcohexylamine Diethanolamine (DEA) Diethyl Phthalate (DEP)

Diethylamine

Diethylene Glycol (DEG) Diisobutyl Ketone (DIBK) Diisodecyl Phthalate (DIDP) Diisononyl Adipate (DINA) Diisononyl Phthalate (DINP) Diisopropyl Ether (DIPE) Dimethyl Carbonate (DMC) Dioctyl Adipate (DOA) Dioctyl Phthalate (DOP) Dipropylene Glycol (DPG) Dodecyl Benzene Sulfonic Acid (DDBSA) EB Acetate
Styrene (ST) Sulfonic Acid T-Butyl Acetate (TBAC) Tetraethylene Glycol (TTEG) Tetrahydrofuran (THF) Titanium Dioxide (Ti02) Toluene Tri-Octyl Trimellitate (TOTM) Triacetin (TA) Trichloroethylene (TCE) Triethanolamine (TEA)

  • Triethylamine
  • Maleic Anhydride

Methyl Acetate (MEAC) Methyl Amyl Ketone (MAK) Methyl Ethyl Ketone (MEK) Methyl Isobutyl Carbinol (MIBC) Methyl Isobutyl Ketone (MIBK) Methyl Methacrylate (MMA) Methyl Propyl Ketone (MPK) Methylene Chloride (MECHL) Mineral Spirits
Triethylene Glycol (TEG) Tripropylene Glycol (TPG) Vinyl Acetate Monomer (VAM) Xylene

Epoxidized Soybean Oil (ESO) Ethoxy Propanol Ethyl Acetate (ETAC) Ethyl Acrylate
Monoethanolamine (MEA) Monoisopropanolamine (MIPA) Monoisopropylamine
Ethyl Methacrylate (EMA) Ethylene Glycol (MEG) Ethylenediamine (EDA)

®

Portland • New Jersey • Los Angeles • Chicago • Houston • Savannah • Charleston • Toronto

222 Clematis Street, Suite 207 West Palm Beach, FL 33401

Phone (561) 659-2236 • [email protected] • www.greenchemindustries.com

GreenChem Industries Chemical And Solvent Product List

  • ACETATES
  • AROMATICS
  • PHTHALATES

EB Acetate DB Acetate Glycol Ether DPM Acetate (DPM Acetate) Ethyl Acetate (ETAC)
Solv 100 Solv 150 Solv 200 Toluene

Dibutyl Phthalate (DBP)

Diethyl Phthalate (DEP) Diisodecyl Phthalate (DIDP) Diisononyl Adipate (DINA)
Isobutyl Acetate Isopropyl Acetate
Xylene Mineral Spirits
Diisononyl Phthalate (DINP) Dioctyl Adipate (DOA)
Methyl Acetate (MEAC) N-Propyl Acetate N-Butyl Acetate (BUTAC) T-Butyl Acetate (TBAC)

Dioctyl Phthalate (DOP)

CHLORINATED SOLVENTS

Methylene Chloride (MECHL)

Perchloroethylene (PERC) Trichloroethylene (TCE)

VARIOUS

911P 1,4-Butanediol (BDO) Acetonitrile Adipic Acid Alpha-Methylstyrene (AMS) Asphalt Cutback Benzyl Chloride Caustic Pot ash 90% Caustic Soda lakes & Beads Cyclohexane Dodecyl Benzene Sulfonic Acid (DDBSA) D-Limonene Dibasic Ester (DBE)
Vinyl Acetate Monomer (VAM)

KETONES

Acetone Cylcohexanone Diisobutyl Ketone (DIBK) Methyl Amyl Ketone (MAK) Methyl Ethyl Ketone (MEK) Methyl Isobutyl Carbinol (MIBC) Methyl Isobutyl Ketone (MIBK) Methyl Propyl Ketone (MPK)

ACIDS

Acetic Acid Benzoic Acid Boric Acid Citric Acid, US Kosher Formic Acid, 80%, 85%, 90%, 95% Glacial Acetic Acid (GAA) Glycolic Acid 70% Hydrochloric Acid (HCL) Isophthalic Acid Itaconic Acid

GLYCOLS

Diethylene Glycol (DEG) Dipropylene Glycol (DPG) Ethylene Glycol (MEG) GreenCool (Inhibited Glycols)

Hexylene Glycol (HG)

Neopentyl Glycol (NPG)

Polyethylene Glycol (PEG)

Propylene Glycol USP K (PG USP K) Propylene Glycol Industrial (PGI) Triethylene Glycol (TEG) Tripropylene Glycol (TPG)
Dibutylamine Diisopropyl Ether (DIPE) Dimethyl Carbonate (DMC)
Oxalic Acid 99.6% Sebacic Acid

  • Sulfonic Acid
  • Epoxidized Soybean Oil (ESO)

Gamma Butyrolactone (GBL) Glycerin US K & Tech Grade Glutaraldehyde 50% Hexane Isooctane Isopar L Isopar M Isophorone

ACRYLATES

2-Ethylhexyl Acrylate (2-EHA) Butyl Acrylate Ethyl Acrylate Ethyl Methacrylate (EMA)

  • Methyl Methacrylate (MMA)
  • Tetraethylene Glycol (TTEG)

  • GLYCOL ETHE S
  • ALCOHOLS

Maleic Anhydride N-Methyl Pyrrolidone (NMP) N-Heptane Nitromethane Nonyl Phenol
2-Ethylhexanol (2-EH) Benzyl Alcohol US & TECH Diacetone Alcohol (DAA) Isobutanol (IBA)
Ethoxy Propanol Glycol Ether DB Glycol Ether DE Glycol Ether DM Glycol Ether DPM

  • Isopropyl Alcohol (IPA)
  • Odorless Mineral Spirits (OMS)

N-Butanol N-Propanol Secondary Butanol (SBA)
P-Chlorbenzotrifluoride (PCBTF) Phenol 85%, 90%, 99% Phthalic Anhydride Propylene Carbonate (PC) Sodium Laurel Sulfate (SLES) 28%, 60%, 70% Styrene (ST) Tetrahydrofuran (THF) Titanium Dioxide (Ti02) Triacetin (TA)
Glycol Ether DPnB Glycol Ether DPnP Glycol Ether EB Glycol Ether EEP Glycol Ether EM Glycol Ether EP Glycol Ether EPH Glycol Ether PM Glycol Ether PMA Glycol Ether PnB Glycol Ether PnP Glycol Ether TPM

AMINES

Cyclohexylamine Dicylcohexylamine Diethanolamine (DEA) Diethylamine Ethylenediamine (EDA) Monoisopropanolamine (MIPA) Monoethanolamine (MEA) Monoisopropylamine Triethanolamine (TEA) Triethylamine
Tri-Octyl Trimellitate (TOTM)

NONYL PHENOL ETHOXYLATES

Np-4, NP-8, NP-9, NP-10, NP-12, NP-100

®

Portland • New Jersey • Los Angeles • Chicago • Houston • Savannah • Charleston • Toronto

222 Clematis Street, Suite 207 West Palm Beach, FL 33401

Phone (561) 659-2236 • [email protected] • www.greenchemindustries.com

Recommended publications
  • High Performance Ester Plasticizers

    High Performance Ester Plasticizers

    High Performance Ester Plasticizers Abstract Traditional elastomer polymers, such as nitrile, polychloroprene, chlorinated polyethylene and chlorosulfonated polyethylene, have for years used moderate- to low- performance ester plasticizers. However, longevity requirements for rubber articles made from these elastomers have created a need for higher-performance ester plasticizers. With the increasing high-temperature demands required by automotive, other elastomers such as acrylic, high-saturated nitrile, epichlorohydrin and ethylene propylene diene monomer EPDM are replacing the more traditional elastomers. Plasticizers commonly used for the traditional and the high-temperature polymers are extractable, incompatible or too volatile. This paper provides information on plasticizers that are designed for traditional elastomers and high-performance polymers. The test data will include heat aging, extraction by hydrocarbons and low-temperature as molded after aging. The information provided indicates that the permanence of the plasticizer after these various agings is the key to the retention of physical properties. Introduction End uses for elastomer compounds are quite diverse, but they can be loosely categorized as being either general performance or higher performance applications. Each of these performance categories requires a different set of considerations in terms of compounding with ester plasticizers. An ester plasticizer, in its simplest concept, is a high-boiling organic solvent that when added to an elastomeric polymer reduces stiffness and permits easier processing.1 For general performance applications, compounders require moderate performance in several areas without particular emphasis on any one. Some general performance ester plasticizers used in the marketplace today are DOA, DIDA, DIDP, DOP, DINP and other phthalates and adipates made from straight-chain alcohols of 7–11 carbons in length.
  • Influence of Different Polymeric Matrices on the Properties of Pentaerythritol Tetranitrate

    Influence of Different Polymeric Matrices on the Properties of Pentaerythritol Tetranitrate

    Defence Science Journal, Vol. 71, No. 2, March 2021, pp. 177-184, DOI : 10.14429/dsj.71.16132 © 2021, DESIDOC Influence of Different Polymeric Matrices on the Properties of Pentaerythritol Tetranitrate Ahmed Elbeih*, Mahmoud Abdelhafiz, and Ahmed K. Hussein Military Technical College, Cairo, Egypt *E-mail: [email protected] ABSTRACT Six different polymeric matrices were fabricated to reduce the sensitivity of PETN (Pentaerythritol tetranitrate). The polymeric matrices used were individually based on Acrylonitrile butadiene rubber (NBR) softened by plasticizer, styrene-butadiene rubber (SBR) softened by oil, polymethyl methacrylate (PMMA) plasticised by dioctyl adipate (DOA), polydimethylsiloxane (PDMS), polyurethane matrix, and Fluorel binder. A computerised plastograph mixer was utilised for producing three polymer-bonded explosives (PETN-NBR, PETN-SBR, and PETN-PDMS) based on the non-aqueous method. A cast-cured method was used to prepare PBX based on polyurethane (PETN-HTPB), while the slurry technique was used to prepare beads of PETN coated by either fluorel binder (PETN-FL) or based on PMMA forming (PETN-PMMA). The heat of combustion and sensitivities were investigated. The velocity of detonation was measured, while the characteristics of the detonation wave were deduced theoretically by the EXPLO 5 (thermodynamic code). The ballistic mortar experiment was performed to determine the explosive strength. By comparing the results, it was found that PDMS has the highest influence on decreasing the impact sensitivity of PETN, while the cast cured PETN-HTPB has the lowest friction sensitivity. On the other side, PETN-FL has the highest detonation parameters with high impact sensitivity. Several relationships were verified and the matching between the measured results with the calculated ones was confirmed.
  • Surface Modification of Engineering Plastics Through Swelling In

    Surface Modification of Engineering Plastics Through Swelling In

    #2008 The Society of Polymer Science, Japan Surface Modification of Engineering Plastics through Swelling in Supercritical Carbon Dioxide By Toshimi TAKAJO,1;2 Atsushi TAKAHARA,1;Ã and Takefumi KICHIKAWA2 In order to improve the tribological characteristics of polymer materials, the authors tried to impregnate the surface of engineering plastics with the lubricating oil by using supercritical carbon dioxide. The oil impregnation ratio on crystalline polymer was influenced by both the glass transition temperature (Tg) and the degree of crystallinity. In case of using the polymer possessing lower Tg with large difference between the Tg and treatment temperature, the higher impregnation ratio was obtained, and the crystallite in crystalline polymer prevented the impregnation of lubricating oil. The results of polarized optical microscopic observations and FT-IR spectroscopy studies indicated that the lubricating oil was preferentially impregnated to the amorphous region in crystalline polymer, and the high-concentration layer of lubricating oil having the thickness of ca. 30 mm was formed at the vicinity of surface area. The result obtained in this study, which reports the preferential lubricating oil impregnation to the surface of crystalline polymer under supercritical carbon dioxide, suggests that the tribological characteristics of crystalline polymer would be improved by applying this oil impregnation method without sacrificing the bulk mechanical strength. KEY WORDS: Supercritical Carbon Dioxide / Oil Impregnation / Engineering Plastic / Tribology / Crystallinity / Many studies carried out by utilizing supercritical fluid have lubricating oil at high temperature over long periods of time to been recently reported, and the representative examples of the impregnate the product with lubricating oil. According to such studies are as follows: researches for the polymerization the method, however, it is unavoidable that the deterioration of reaction in supercritical fluid, the supercritical extraction- polymer is accelerated.
  • Raw Materials, Chemicals and Additives Handbook – March 2009 Product Listings

    Raw Materials, Chemicals and Additives Handbook – March 2009 Product Listings

    Raw Materials, Chemicals and Additives Handbook – March 2009 Product Listings A. ADDITIVES AND CHEMICAL SPECIALTIES 13350 Polyfunctional Aziridines 10100 Accelerating and Vulcanizing Agents: 13400 Polyols 10150 Abrasives 13450 Resorcinol Resins 10200 Dithiocarbamates 13500 Silane 10250 Sulfur 13550 Silicone 10300 Thiazoles 13600 Toluene Diisocyanate (TDI) 10350 Thiuram Sulfides 13650 Urea-Formaldehyde Resins 10400 Zinc Oxides 13700 Zinc Salts 10450 Acids (Non-Fatty) 13750 Zirconium 10500 Additives 13800 Defoamers: 10550 Adhesion Promoters: 13850 Aluminum Stearate 10600 Adhesive Bonding Primers 13900 Amyl Alcohol 10650 Alpha Methyl-Styrene Polymers 13950 Capryl Alcohol 10700 Hydrogenated Resins 14000 Castor Oil 10750 Pentaerythritol Esters 14050 Corn Oil 10800 Phenolic Resins 14100 Decyl Alcohol 10850 Resorcinol 14150 Diethylene Glycol Monolaurate 10900 Silane 14200 Glyceryl Monostearate 10950 Silicone 14250 Mineral Oil 11000 Unsaturated Polyesters 14300 Nonyl Alcohol 11050 Vinyl Pyridine Monomer 14350 Octyl Alcohol 11100 Amine Neutralizers 14400 Palmitic Acid 11150 Ammonia 14450 Pine Oil 11200 Anti-Foaming Agents: 14500 Polyalkyl Glycol 11250 Non-Silicone 14550 Silicone Oils 11300 Silicone 14600 Stearic Acid 11350 Antioxidants: 14650 Sulfonic Acid Salts 11400 Phenolic 14700 Tri-Butyl Citrate 11450 Phosphite 14750 Tri-Butyl Phosphate 11500 Anti-Settling Agents 14800 Turkey Red Oil 11550 Anti-Skinning Agents 14900 Dispensing Agents 11600 Anti-Static Chemicals 14950 Dispersing Agents, see 22900 Surfactants and 11650 Anti-Tack Agents Dispersing
  • Review of Exposure and Toxicity Data for Phthalate Substitutes

    Review of Exposure and Toxicity Data for Phthalate Substitutes

    EXECUTIVE SUMMARY In August 2008, the U.S. Congress passed the Consumer Product Safety Improvement Act of 2008 (CPSIA) placing restrictions on the use of six dialkyl ortho-phthalates (o- DAPs) in children’s toys or child care articles. The CPSIA also directs the Consumer Product Safety Commission (CPSC) to convene a Chronic Hazard Advisory Panel to investigate the potential health effects of phthalates and phthalate substitutes. The purpose of this report is to identify o-DAP substitutes that are currently being used in children’s articles, or are probable future candidates, and to summarize the potential human health risks associated with using these chemicals in this manner. Chemicals were identified as the most likely alternatives to o-DAPs in children’s articles based on a variety of factors which included their compatibility with polyvinyl chloride (PVC). The five chemicals identified by this report as the most likely o-DAP alternatives are acetyl tri-n-butyl citrate (ATBC), di(2-ethylhexyl) adipate (DEHA), 1,2- cyclohexanedicarboxylic acid, dinonyl ester (DINCH), trioctyltrimellitate (TOTM),and di(2-ethylhexyl) terephthalate (DEHT or DOTP). All, except TOTM, have been cited as already being used in children’s articles. However, TOTM is compatible with PVC – the most popular resin for children’s soft plastic toys and other articles – and thus a likely o- DAP alternative. The review of the potential risks of using these chemicals in children’s articles focused on the amount and quality of data available for the chemical. Key parameters included physical-chemical properties, migration rates, and all available exposure, hazard, and dose-response information.
  • Chemical Compatibility Chart

    Chemical Compatibility Chart

    Chemical Compatibility Chart 1 Inorganic Acids 1 2 Organic acids X 2 3 Caustics X X 3 4 Amines & Alkanolamines X X 4 5 Halogenated Compounds X X X 5 6 Alcohols, Glycols & Glycol Ethers X 6 7 Aldehydes X X X X X 7 8 Ketone X X X X 8 9 Saturated Hydrocarbons 9 10 Aromatic Hydrocarbons X 10 11 Olefins X X 11 12 Petrolum Oils 12 13 Esters X X X 13 14 Monomers & Polymerizable Esters X X X X X X 14 15 Phenols X X X X 15 16 Alkylene Oxides X X X X X X X X 16 17 Cyanohydrins X X X X X X X 17 18 Nitriles X X X X X 18 19 Ammonia X X X X X X X X X 19 20 Halogens X X X X X X X X X X X X 20 21 Ethers X X X 21 22 Phosphorus, Elemental X X X X 22 23 Sulfur, Molten X X X X X X 23 24 Acid Anhydrides X X X X X X X X X X 24 X Represents Unsafe Combinations Represents Safe Combinations Group 1: Inorganic Acids Dichloropropane Chlorosulfonic acid Dichloropropene Hydrochloric acid (aqueous) Ethyl chloride Hydrofluoric acid (aqueous) Ethylene dibromide Hydrogen chloride (anhydrous) Ethylene dichloride Hydrogen fluoride (anhydrous) Methyl bromide Nitric acid Methyl chloride Oleum Methylene chloride Phosphoric acid Monochlorodifluoromethane Sulfuric acid Perchloroethylene Propylene dichloride Group 2: Organic Acids 1,2,4-Trichlorobenzene Acetic acid 1,1,1-Trichloroethane Butyric acid (n-) Trichloroethylene Formic acid Trichlorofluoromethane Propionic acid Rosin Oil Group 6: Alcohols, Glycols and Glycol Ethers Tall oil Allyl alcohol Amyl alcohol Group 3: Caustics 1,4-Butanediol Caustic potash solution Butyl alcohol (iso, n, sec, tert) Caustic soda solution Butylene
  • United States Patent (19) 11 Patent Number: 5,009,728 Chan Et Al

    United States Patent (19) 11 Patent Number: 5,009,728 Chan Et Al

    United States Patent (19) 11 Patent Number: 5,009,728 Chan et al. (45. Date of Patent: Apr. 23, 1991 (54 CASTABLE, INSENSITIVE ENERGETIC 4,141,910 2/1979 Flanagan et al. ..................... 149/88 COMPOSITIONS 4,325,759 4/1982 Voigt et al. ..... - 49/19.92 4,361,526 11/1982 Allen ....................................... 264/3 (75) Inventors: May L. Chan; Alan D. Turner, both of 4,393,199 7/1983 Manser ................ ... 149/19.6 Ridgecrest, Calif. 4,426,540 1/1984 Shackelford et al. 149/19.91 4,456,494 6/1984 Maes et al. ........... ... 149/2 73) Assignee: The United States of America as 4,555,277 11/1985 Scribner ....... 149/19.4 represented by the Secretary of the 4,632,714 12/1986 Abegget al. ........................... 149/2 Navy, Washington, D.C. 4,764,316 8/1988 Brown et al..... ... 264/3.1 4,806,613 2/1989 Wardle......... ... 149/19.6 21 Appl. No.: 464,076 4,889,571 12/1989 Willer et al. ....................... 149/19.9 22 Filed: Jan. 12, 1990 OTHER PUBLICATIONS 51 int.C.'.............................................. C06B 45/10 52 U.S. C. ........................ ....... 149/19.1; 149/19.4; P. A. Mancinelli and S. O. Norris, "Macromonomers 149/19.5; 149/19.6; 149/19.9; 149/19.91; Lead to Acrylic Hot Melt and Solvent PSAs", reprint 149/88; 149/92 from Adhesives Age, Sep. 1985, (copy enclosed). (58) Field of Search .................... 149/19.4, 19.6, 199, Primary Examiner-Edward A. Miller 149/19.91, 19.1, 19.5, 88, 92 Attorney, Agent, or Firm-Donald E.
  • Synthesis and Application of Natural Polymeric Plasticizer Obtained Through Polyesterification of Rice Fatty Acid 1. Introductio

    Synthesis and Application of Natural Polymeric Plasticizer Obtained Through Polyesterification of Rice Fatty Acid 1. Introductio

    Materials Research. 2014; 17(2): 386-391 © 2014 DOII: http://dx.doi.org/10.1590/S1516-14392014005000017 Synthesis and Application of Natural Polymeric Plasticizer Obtained Through Polyesterification of Rice Fatty Acid Melissa Gurgel Adeodato Vieiraa, Mariana Altenhofen da Silvaa, André Costa Gomes Maçumotoa, Lucielen Oliveira dos Santosb, Marisa Masumi Beppua* aSchool of Chemical Engineering, University of Campinas – UNICAMP, Av. Albert Einstein, 500, Cidade Universitária “Zeferino Vaz”, CEP 13083-852, Campinas, SP, Brazil bSchool of Chemistry and Food, Federal University of Rio Grande – FURG, CP 474, CEP 96201-900, Rio Grande, RS, Brazil Received: April 16, 2013; Revised: January 7, 2014 This study includes the synthesis of a new natural plasticizer obtained through esterification reaction of rice fatty acid and polyols, its physicochemical characterization and its preliminary application in polyvinyl chloride (PVC). Monopropylene glycol, octanol and diethylene glycol were used as polyols for esterification reaction. Catalyst Fascat® 4100, was also added. Viscosity, acidity and hydroxyl index, moisture content, molar mass, chemical composition (by FTIR) and color were determined to characterize the natural plasticizer synthesized. The results were compared with a commercial plasticizer (DOA: di-octyl adipate) derived from petrochemical source and synthesized in laboratory. According to the results, except from color, the natural plasticizer presented similar properties of commercially available plasticizers, such as DOA. Mechanical tests indicated that the addition of the natural plasticizer to PVC films resulted in a significant increase on its elongation at break (371.2%) compared to pure PVC film, indicating a possible application for this plasticizer. Keywords: esterification, fatty acid of rice, natural plasticizer 1. Introduction Rice bran is a by-product of the rice milling process to the polymer and plasticizer, as well as solubility parameters produce white rice.
  • Plasticizers Methodology the Global Plasticizers Market Size Is Around

    Plasticizers Methodology the Global Plasticizers Market Size Is Around

    Copyright © 2015 Reed Business Information Ltd. ICIS is a part of the Reed Elsevier plc group Plasticizers Methodology The global plasticizers market size is around 6m tonnes/year, of which Asia is the largest consumer, accounting for approximately 3.5m tonnes/year, followed by Europe, with around 1m tonnes/year and the US at about 800,000 tonnes/year. Plasticizers are additives that increase the plasticity or fluidity of the material to which they are added. Some 96% of plasticizers are consumed in flexible PVC applications, including cables, PVC films, roofing, flooring and wall covering. In the US, 80-90% of plasticizers are consumed in PVC applications. Plasticizers are grouped into a number of categories such as orthophthalates – commonly referred to as phthalates – aliphatics (mainly adipates), trimellitates, epoxy, polymerics and phosphates. They can be substituted by one another, depending on cost, performance and legislation. Ortho-phthalate plasticizers such as dioctyl phthalate (DOP), diisononyl phthalate (DINP) and di-propyl heptyl phthalate (DPHP) are by far the predominant types, representing around 75-85% of plasticizers produced and consumed in the world. However, environmental and health concerns being attributed to orthophthalates - more so to low phthalates such as DOP - have led to a decline in their use against a growing trend for using more environmentally-friendly compounds such as dioctyl terephthalate (DOTP). Non-phthalate plasticizers include dioctyl adipate (DOA), 1,2-cyclohexane dicarboxylic acid diisononyl ester (DINCH) and trioctyl trimellitate (TOTM). ICIS pricing quotes DOP, DINP, DOTP, DOA, DPHP, DINCH and TOTM in the US; DOP, DINP and DOTP in Asia-Pacific; and DOP, DINP, DOTP and DPHP in Europe.
  • Aldrich Polymer Products Applicaton & Reference Information

    Aldrich Polymer Products Applicaton & Reference Information

    Reference:Reference: PolymerPolymer PropertiesProperties Polymer Solutions: Solvents and Solubility Parameters Various applications require the selection of a polymer-sol- polymers do not dissolve, but usually swell in the presence of vent or polymer-plasticizer system. Dissolving a polymer is solvent. Table I is a quantitative guide1 for selecting solvents to unlike dissolving low molecular weight compounds because dissolve or swell polymers. The polymer is composed of the of the vastly different dimensions of solvent and polymer mol- stated Repeating Unit. Representative homopolymers from ecules. Dissolution is often a slow process. While some poly- each of the main polymer classes were selected. Since poly- mers dissolve readily in certain solvents resulting in a true mer solubility is a complex function of many variables includ- solution, others may require prolonged periods of heating at ing but not limited to molecular weight, degree of crystallinity, temperatures near the melting point of the polymer. Network extent of branching, and temperature, the solubility may vary greatly within a given polymer class. Table I: Solvents for Representative Homopolymers from Selected Polymer Classes Repeating Unit Solvents Acetylene Isopropylamine, aniline Acrylamide Morpholine, water Acrylate esters Aromatic hydrocarbons, chlorinated hydrocarbons, THF, esters, ketones Acrylic acid Alcohols, water, dilute aqueous alkali Acrylonitrile Phenylenediamines, ethylene carbonate, sulfuric acid Alkyl vinyl ethers Benzene, halogenated hydrocarbons, methyl

  • United States Patent 0 Ice Patented Jan

    3,786,011 United States Patent 0 ice Patented Jan. 15, 1974 l 2 3,786,011 Accordingly, the invention comprises a synthetic pitch POLYVINYL CHLORIDE RESIN COMPOSITION or ?eld for cricket, tennis and like ball games containing CLOSELY SIMULA'I'ING A GRASS PLAYING SURFACE IN ITS BOUNCE CHARACTERISTICS 25% to 75% of plasticized polyvinyl chloride, 5% to David Watkin Price and Ronald Sidebottom, Cheltenham, 20% of a ?nely divided ?brous material, 0% to 20% of Murray George Briscoe, Eckington, and Ronald Charles 5 a natural or synthetic rubber compatible with the plasti Moore, North Weald, England, assignors to Coal In cized polyvinyl chloride, and 10% to 60% of a ?nely di dustry (Patents) Limited, London, England vided particulate ?ller, all parts being by weight of the No Drawing. Filed June 1, 1971, Ser. No. 149,002 total weight of the composition. Int. Cl. C08c 9/14; C08f 29/24 Any conventional polyvinyl chloride may be employed U.S. Cl. 260-22 CB 18 Claims in the present invention. Copolymers of vinyl chloride with other monomers, which copolymers have physical ABSTRACT OF THE DISCLOSURE properties similar to that of conventional polyvinyl chlo ride, and desirably contain at least 70 mole percent, pref A synthetic pitch or ?eld for cricket, tennis, and like erably at least 80 mole percent, of vinyl chloride mono ball games is provided, which, in contrast to previous pro 15 mer, may also be employed. Mixtures of the copolymers posed pitches, closely simulates grass, particularly in its with homopolymer may be employed. Suitable comono bounce characteristics, especially for spinning balls.

  • Product List Nordic

    1 RUBBER NORDIC Rubber Auxiliaries Functions & Chemical Types Factices based on rape and castor oil - brown, yellow, white, peroxide and other Plasticizers - peptizators, phthalates (dioktyl, diisobutyl, diisononyl, diisodecyl, paraffin and naphten oils, calophony and vegetable oils, special plasticizers (phosphate, polymeric), non-phthalate plasticizers Dispersing agents - zinc and non-zinc Peroxides , trade name Luperox Sulphur preparations and sulphur donors Silane Filler Activators (coupling agents) Flame retardants - antimony trioxide, ATH, chlorinated paraffin Homogenisers and tackifying resins - hydrocarbon resins, PIB Antioxidants and antiozonants - Octamine, MMBI, IPPD, TMQ Antiozonant waxes Vulcanisation activators - stearic acids, zinc oxides Desiccants vulcanisation stabilisers amd other additives Peroxides , trade name Luperox Sulphur preparations and sulphur donors Silane Filler Activators (coupling agents) Flame retardants - antimony trioxide, ATH, chlorinated paraffin Homogenisers and tackifying resins - hydrocarbon resins, PIB Antioxidants and antiozonants - Octamine, MMBI, IPPD, TMQ Antiozonant waxes Vulcanisation activators - stearic acids, zinc oxides Desiccants vulcanisation stabilisers and others Additives Functions & Chemical Types Trade Name Family DESCRIPTION Flame Retarders Sidistar From Elkem (Nordic) Masterbatches Base LDPE, LLDPE, PP Up to 70 % Ti02, also with additives White (Nordic) Base LDPE, LLDPE, GPPS Up to 50 % Carbon Black, also with Black additives (Nordic) Coloured Base LDPE, PP, PP also with additives