Emission Station List by County for the Web
Total Page：16
File Type：pdf, Size：1020Kb
Load more
Recommended publications
-
2012: Providence, Rhode Island
The 63rd Annual Meeting of the American Research Center in Egypt April 27-29, 2012 Renaissance Providence Hotel Providence, RI Photo Credits Front cover: Egyptian, Late Period, Saite, Dynasty 26 (ca. 664-525 BCE) Ritual rattle Glassy faience; h. 7 1/8 in Helen M. Danforth Acquisition Fund 1995.050 Museum of Art Rhode Island School of Design, Providence Photography by Erik Gould, courtesy of the Museum of Art, Rhode Island School of Design, Providence. Photo spread pages 6-7: Conservation of Euergates Gate Photo: Owen Murray Photo page 13: The late Luigi De Cesaris conserving paintings at the Red Monastery in 2011. Luigi dedicated himself with enormous energy to the suc- cess of ARCE’s work in cultural heritage preservation. He died in Sohag on December 19, 2011. With his death, Egypt has lost a highly skilled conservator and ARCE a committed colleague as well as a devoted friend. Photo: Elizabeth Bolman Abstracts title page 14: Detail of relief on Euergates Gate at Karnak Photo: Owen Murray Some of the images used in this year’s Annual Meeting Program Booklet are taken from ARCE conservation projects in Egypt which are funded by grants from the United States Agency for International Development (USAID). The Chronique d’Égypte has been published annually every year since 1925 by the Association Égyptologique Reine Élisabeth. It was originally a newsletter but rapidly became an international scientific journal. In addition to articles on various aspects of Egyptology, papyrology and coptology (philology, history, archaeology and history of art), it also contains critical reviews of recently published books. -
June 18 Newsletter
ESSEX EGYPTOLOGY GROUP Newsletter 114 June/July 2018 DATES FOR YOUR DIARY 3rd June The Tomb of Tatia at Saqqara: Vincent Oeters 1st July Papyrus Berlin P10480-82: a Middle Kingdom mortuary ritual reflected in writing: Dr Ilona Regulski 5th August Flies, lions and oysters: military awards or tea for two: Taneash Sidpura Annual General Meeting 2nd September Egypt’s Origins: the view from Mesopotamia and Iran: Dr Paul Collins This month we welcome back Vincent Oeters from Holland. During the 2009 field season of the joint mission of the Rijksmuseum van Oudheden (National Museum of Antiquities) at Leiden, the Netherlands and Leiden University (Faculty of Humanities, Department of Egyptology) a small Ramesside tomb-chapel was unearthed in the New Kingdom necropolis at Saqqara (1550-1070 BC), south of the causeway of Unas. The tomb-chapel belonged to a man named Tatia, Priest of the front of Ptah and Chief of the Goldsmiths. By studying the reliefs as well as the architecture and by comparing the tomb with other Ramesside tombs at Saqqara and elsewhere, an attempt was made to establish a more precise dating of the monument. Recent research has resulted in new insights on Tatia and his career, signs of private devotion and familial relationships. It appears Tatia was a relative of two other well-known New Kingdom officials, one whose important tomb was also built at Saqqara, the other a vizier and 'High Priest of Amun' in Thebes. In July we welcome, Ilona Regulski, the curator responsible for the papyrus collection and other inscribed material in the collection at the British Museum. -
Needle Roller and Cage Assemblies B-003〜022
*保持器付針状/B001-005_*保持器付針状/B001-005 11/05/24 20:31 ページ 1 Needle roller and cage assemblies B-003〜022 Needle roller and cage assemblies for connecting rod bearings B-023〜030 Drawn cup needle roller bearings B-031〜054 Machined-ring needle roller bearings B-055〜102 Needle Roller Bearings Machined-ring needle roller bearings, B-103〜120 BEARING TABLES separable Self-aligning needle roller bearings B-121〜126 Inner rings B-127〜144 Clearance-adjustable needle roller bearings B-145〜150 Complex bearings B-151〜172 Cam followers B-173〜217 Roller followers B-218〜240 Thrust roller bearings B-241〜260 Components Needle rollers / Snap rings / Seals B-261〜274 Linear bearings B-275〜294 One-way clutches B-295〜299 Bottom roller bearings for textile machinery Tension pulleys for textile machinery B-300〜308 *保持器付針状/B001-005_*保持器付針状/B001-005 11/05/24 20:31 ページ 2 B-2 *保持器付針状/B001-005_*保持器付針状/B001-005 11/05/24 20:31 ページ 3 Needle Roller and Cage Assemblies *保持器付針状/B001-005_*保持器付針状/B001-005 11/05/24 20:31 ページ 4 Needle roller and cage assemblies NTN Needle Roller and Cage Assemblies This needle roller and cage assembly is one of the or a housing as the direct raceway surface, without using basic components for the needle roller bearing of a inner ring and outer ring. construction wherein the needle rollers are fitted with a The needle rollers are guided by the cage more cage so as not to separate from each other. The use of precisely than the full complement roller type, hence this roller and cage assembly enables to design a enabling high speed running of bearing. -
Modelling Radiation Exposure and Radionuclide Transfer for Non-Human Species
Modelling Radiation Exposure and Radionuclide Transfer for Non-human Species Report of the Biota Working Group of EMRAS Theme 3 Environmental Modelling for RAdiation Safety (EMRAS) Programme FOREWORD Environmental assessment models are used for evaluating the radiological impact of actual and potential releases of radionuclides to the environment. They are essential tools for use in the regulatory control of routine discharges to the environment and also in planning measures to be taken in the event of accidental releases; they are also used for predicting the impact of releases which may occur far into the future, for example, from underground radioactive waste repositories. It is important to check, to the extent possible, the reliability of the predictions of such models by comparison with measured values in the environment or by comparing with the predictions of other models. The International Atomic Energy Agency (IAEA) has been organizing programmes of international model testing since the 1980s. The programmes have contributed to a general improvement in models, in transfer data and in the capabilities of modellers in Member States. The documents published by the IAEA on this subject in the last two decades demonstrate the comprehensive nature of the programmes and record the associated advances which have been made. From 2003 to 2007, the IAEA organised a programme titled “Environmental Modelling for RAdiation Safety” (EMRAS). The programme comprised three themes: Theme 1: Radioactive Release Assessment ⎯ Working Group 1: Revision of IAEA Technical Report Series No. 364 “Handbook of parameter values for the prediction of radionuclide transfer in temperate environments (TRS-364) working group; ⎯ Working Group 2: Modelling of tritium and carbon-14 transfer to biota and man working group; ⎯ Working Group 3: the Chernobyl I-131 release: model validation and assessment of the countermeasure effectiveness working group; ⎯ Working Group 4: Model validation for radionuclide transport in the aquatic system “Watershed-River” and in estuaries working group. -
AND8002/D Eclinps™, Eclinps Lite™, Eclinps Plus™, Eclinps MAX™, and Gigacomm™ Marking and Ordering Information Guide
查询AND8003-D供应商 捷多邦，专业PCB打样工厂，24小时加急出货 AND8002/D ECLinPS,ECLinPSLite, ECLinPSPlus, ECLinPSMAX,and GigaCommMarkingand OrderingInformationGuide http://onsemi.com APPLICATION NOTE Prepared by: Paul Shockman ON Semiconductor HFPD Applications Engineer Introduction This application note describes the device markings and This application note also includes the following ordering information for the following ON Semiconductor appendices: families (refer to the respective family data book for family • Appendix 1: ECLinPS Device Order Number and information): Marking tables. • ECLinPS • Appendix 2: ECLinPS Lite Device Order Number and • ECLinPS Lite Marking tables. • ECLinPS Plus • Appendix 3: ECLinPS Plus Device Order Number and • ECLinPS MAX Marking tables. • GigaComm • Appendix 4: ECLinPS MAX Device Order Number Note that data sheet information takes precedence over and Marking Tables. this application note if there are any differences. • Appendix 5: GigaComm Device Order Number and Marking tables. Application Note Information This application note is divided into the following sections: • Section 1: Data Sheet Marking Diagrams − The diagrams provide identification, traceability, date, and packaging information. • Section 2: Data Sheet Ordering Information Tables − The tables list the device order numbers for every available device configuration. Semiconductor Components Industries, LLC, 2005 1 Publication Order Number: April, 2005 − Rev. 6 AND8002/D AND8002/D SECTION 1: Data Sheet Marking Diagrams Device Marking Examples • Code 1. Circuit Identification Code The marking format is dependent upon the device • Code 2. Temperature Compensation Code package, and larger device packages allow the inclusion of • Code 3. Family Identification Code more information on the face of the device. On the larger • packages where marking space permits, the Pb Free Code 4. -
Folklore and Etymological Glossary of the Variants from Standard French in Jefferson Davis Parish
Louisiana State University LSU Digital Commons LSU Historical Dissertations and Theses Graduate School 1934 Folklore and Etymological Glossary of the Variants From Standard French in Jefferson Davis Parish. Anna Theresa Daigle Louisiana State University and Agricultural & Mechanical College Follow this and additional works at: https://digitalcommons.lsu.edu/gradschool_disstheses Part of the French and Francophone Language and Literature Commons Recommended Citation Daigle, Anna Theresa, "Folklore and Etymological Glossary of the Variants From Standard French in Jefferson Davis Parish." (1934). LSU Historical Dissertations and Theses. 8182. https://digitalcommons.lsu.edu/gradschool_disstheses/8182 This Thesis is brought to you for free and open access by the Graduate School at LSU Digital Commons. It has been accepted for inclusion in LSU Historical Dissertations and Theses by an authorized administrator of LSU Digital Commons. For more information, please contact [email protected]. FOLKLORE AND ETYMOLOGICAL GLOSSARY OF THE VARIANTS FROM STANDARD FRENCH XK JEFFERSON DAVIS PARISH A THESIS SUBMITTED TO THE FACULTY OF SHE LOUISIANA STATS UNIVERSITY AND AGRICULTURAL AND MECHANICAL COLLEGE IN PARTIAL FULLFILLMENT FOR THE DEGREE OF MASTER OF ARTS IN THE DEPARTMENT OF ROMANCE LANGUAGES BY ANNA THERESA DAIGLE LAFAYETTE LOUISIANA AUGUST, 1984 UMI Number: EP69917 All rights reserved INFORMATION TO ALL USERS The quality of this reproduction is dependent upon the quality of the copy submitted. In the unlikely event that the author did not send a complete manuscript and there are missing pages, these will be noted. Also, if material had to be removed, a note will indicate the deletion. UMI Dissertation Publishing UMI EP69917 Published by ProQuest LLC (2015). -
Derelict Or Abandoned Vessels Removed by Authorized Washington State Public Entities
Derelict or Abandoned Vessels Removed by 514 Authorized Washington State Public Entities Priority DVRP # Vessel_Name Vessel ID Length (ft) General Location Removed By CL10-002 unknown WN 7354 MD 31 Vancouver Lake, NE shoreline Clark County Sheriff CL10-003 BCC17543M79D 16 WDFW boat ramp 12100 blk NW Lower River Rd Vanc Clark County CL10-004 WN 106 GA 16 Ridgefield boat ramp Clark County CL11-004 none none 16 Davy Crocket sheet pile wall, Camus IS12-002 unnamed Livingston dingh WN 4154 MF Anacortes at Deception Pass DNR y JF10-011 unknown blue skiff unknown 12 Port Hadlock DNR KI08-010 WN 6250 V 22 North West corner of Port of Seattle Terminal 5 Port of Seattle KI10-017 unnamed catamaran WN 1983 NP 46 Quartermaster Harbor at Dockton King County & DNR KI11-005 WN 5148 RC Maury Island KI12-006 Sport'n Wood WN 9566X Sammamish River King County Sheriff/City of KP07-019 Balboa WN 1949 KH 16 Manzanita Bay, Bainbridge Island City of Bainbridge Island KP10-026 WN 8174 R 22 Eagle Harbor, Bainbridge Island COBI/DNR KP10-027 WN 1481 JA 27 Eagle Harbor, Bainbridge Island COBI/DNR KP11-003 Willetta WN 7048 JA 38 Port of Poulsbo Marina Port of Poulsbo KP11-004 unknown sunken v 0 Eagle Harbor City of Bainbridge Island KP12-011 Altair CCY242000676 Liberty Bay DNR (Jobs Now) KP12-012 Vision 250177 Liberty Bay DNR (Jobs Now) KP12-013 Chris-E WN-0089KD 33 Liberty Bay DNR (Jobs Now) KP12-014 WN-4648JC Liberty Bay DNR (Jobs Now) KP12-018 Miss Serene WN 308 SUN Sinclair inlet near SW Bay St., ort Orchard Port Orchard PD Tuesday, January 07, 2014 Derelict Vessel Removal Program, Dept. -
Water Quality Assessment Report for United Keno Hill Mines
WATER QUALITY ASSESSMENT REPORT FOR UNITED KENO HILL MINES Report Prepared for: Elsa Reclamation and Development Company Whitehorse, Yukon Report Prepared by: Minnow Environmental Inc. 2 Lamb Street Georgetown, Ontario L7G 3M9 July 2008 WATER QUALITY ASSESSMENT REPORT FOR UNITED KENO HILL MINES Report Prepared for: Elsa Reclamation and Development Company Whitehorse, Yukon Report Prepared by: Minnow Environmental Inc. Cynthia Russel, B.Sc. Project Manager Patti Orr, M.Sc. Technical Reviewer July 2008 ERDC Water Quality Assessment EXECUTIVE SUMMARY United Keno Hill Mines Limited and UKH Minerals Ltd. were the previous owners of the properties located on and around Galena Hill, Keno Hill, and Sourdough Hill collectively known as the United Keno Hill Mining Property (UKHM). The UKHM is located in north- central Yukon Territory and is comprised of approximately 827 mineral claims covering the three mountains (“hills” named above) over an area of approximately 15,000 ha (about 29 km long and 8 km wide). Associated with the site are abandoned adits, buildings/structures, and waste material which represent a source of contaminants to the downstream watersheds. In June 2005, Alexco Resource Corp was selected as the preferred purchaser of the UKHM assets. Alexco’s subsidiary Elsa Reclamation and Development Company (ERDC) is required to develop a Reclamation Plan for the Existing State of the Mine. As part of the closure planning process, long-term water quality performance will need to be assessed relative to relevant water uses and closure plan options. It is expected that historical sources associated with the UKHM may not allow for generic water quality guidelines to be achieved at all downstream locations and that alternative targets may need to be developed, depending on water use goals. -
On the Modeling of Air Flow in the Tombs of the Valley of Kings
cs: O ani pe ch n e A c M c Khalil, Fluid Mech Open Acc 2017, 4:3 d e i s u s l F Fluid Mechanics: Open Access DOI: 10.4172/2476-2296.1000166 ISSN: 2476-2296 Research Article Open Access On the Modeling of Air Flow in the Tombs of the Valley of Kings Essam E Khalil1,2* 1Chairman Arab HVAC Code Committee ASHRAE Director-At-Large, USA, Convenor ISO TC205 WG2, Co-Convenor ISO TC163 WG4, Deputy Director (International) AIAA, USA 2DIC, Professor of Mechanical Engineering, Cairo University, Cairo, Egypt Abstract The tombs of the kings in Valley of the Kings, Luxor, are considered to be one of the tourism industry’s bases in Egypt due to their uniqueness all over the world. Hence, they should be preserved from the different factors that might cause harm for their wall paintings. One of these factors is the excessive relative humidity as it increases the bacteria and fungus activity inside the tomb in addition to its effect on the mechanical and physical properties of materials. This chapter describes the Research work to design ventilation systems to some of these important tombs. The chapter aims to investigate, design, and implement controlled climate to the tombs of the valley of kings with complete monitoring of air properties, temperature, relative humidity and carbon oxides and air quality parameters mechanical distributions inside selected tombs of the valley of the kings that are open for visitors. A complete climate control and monitoring of air will be effected with the aid of a mechanical ventilation system extracting air at designated locations in the wooden raised floor of the tombs. -
Il Cristianesimo in Egitto Luci E Ombre in Abydos La Tomba
egittologia.net magazine in questo numero: IL CRISTIANESIMO IN EGITTO EGITTO A VENEZIA LUCI E OMBRE IN ABYDOS SPECIALE NEFERTARI LA TOMBA QV66 AREA ARCHEOLOGICA TEBANA IL VILLAGGIO DI DEIR EL-MEDINA EGITTO IN PILLOLE ISCRIZIONI IERATICHE NELLA TOMBA DI THUTMOSI IV Italiani in Egitto: Ernesto Schiaparelli | L’Arte di Shamira | I papiri di Carla BOLLETTINO INFORMATIVO DELL'ASSOCIAZIONE EGITTOLOGIA.NET NUMERO 3 e d i t o r i a l e La prolungata e precoce presenza di questo Confesso che questo numero di EM – Egitto- insolito e intenso caldo, dà l’impressione che logia.net Magazine è stato sul punto di non l’estate stia già volgendo al termine, anche se uscire! La prossimità con il ferragosto e il in realtà la legna accumulata per l’inverno caldo scoraggiante, soprattutto nelle due set- dovrà aspettare ancora molto tempo prima di timane centrali del mese di luglio – periodo in essere utile. cui il terzo numero del magazine ha comin- Curioso come hanno deciso di chiamare le tre ciato a prendere vita – ci avevano fatto propen- fasi più intense del caldo i meteorologici: Sci- dere per una sospensione, procrastinandone pione, Caronte e Minosse. Curioso perché mi l’uscita direttamente a ottobre. vien da pensare che l’epiteto “Africano” di Sci- Ma abbiamo resistito alla tentazione, sospen- pione e il collegamento con l’Ade che è possi- dendo solo una parte dei temi che abbiamo bile fare con Caronte e Minosse, abbia cominciato a trattare nei numeri precedenti, richiamato alla mente degli scienziati il con- come ci è stato richiesto dagli autori degli cetto di “caldo”. -
Minnowenvironmental Inc
--~------- minnowenvironmental inc. _____ 2 Lamb Street Georgetown, Ontario L7G 3M9 Memorandum To: Dan Cornett, Access Consulting Group From: Cynthia Russel, Minnow Environmental Inc. Date: February 13, 2008-02-13 Re: Update of Surface Water Quality Assessment for United Keno Hill Mine Complex. Minnow Environmental Inc. (Minnow) was retained by Access Consulting Group to undertake an assessment of the existing water quality data for the United Keno Hill Mine Complex (United Keno, Galena and Sourdough Hill). The objective of this assessment was to identify parameters and locations of concern within the downstream waters relative to established guidelines and background. This information, combined with toxicity data and watershed use objectives may then be combined to develop an approach for considering the development of Site Specific Water Quality Objectives (SSWQO) for various parameters and locations. In order to meet the study objectives, a progressive assessment of the available water quality data was undertaken which included the following steps; • Screen all data to identify outliers (i.e., those greater then 3 standard deviations from the mean) and remove these data. • Establish the background concentration for each parameter based the upper limit of background data distribution (mean + t S.D.) for the combined data from KV-1 and KV-37. UKH Surface Water Quality Assessment - Progress Report • Identify parameters with high method detection limits relative to guidelines which preclude determination of whether concentrations exceed the guideline. • Identify background concentrations which exceed the Canadian Water Quality Guidelines (CWQG). • Determine the median, mean, minimum and maximum concentration for each parameter at each location. • Determine which locations exceed background and/or CWQG at measurable (10%) and substantial (50%) frequencies. -
Letting Celebrity Cruises® Arrange Your Private Car/Van Experience in Europe
Letting Celebrity Cruises® arrange your private car/van experience in Europe. When you book a Celebrity Cruises private car/van arrangement, your tour will be run by one of a select group of guides and operators handpicked by us to meet our high standards. By booking private arrangements through Celebrity Cruises, you’ll enjoy the peace of mind that comes with knowing we’ve handled the details so you can relax and enjoy your day. Private car/van arrangements allow you to choose an itinerary geared toward your own personal interests, convenience and flexibility. For guests who want to explore individually or in a small group, you have the opportunity to tour the city and/or surrounding areas via a private vehicle. Two ways to purchase private arrangements: 1. Private car/van arrangements are available for online booking in over 50 Europe ports (refer to the list of currently offered private arrangements starting on page 3). Please visit celebritycruises.com for complete detailed information including pricing, terms and conditions. 2. Should you determine you would like a more customized tour program with entrance fees included or a specific itinerary in mind, please find the Custom Private Arrangement Request Form on the next page and complete the required information. Email the form to [email protected] or fax to (305) 579-0193. A few things to keep in mind: • Vehicles are offered on a half -day or full-day basis. • A car will accommodate 1 to 3 guests, with a maximum capacity requiring 3 passengers sitting in the back seat. • A van will accommodate 4 to 8 passengers.