Wide-Beam Performance— for Tuna and Marlin Fishing
Total Page:16
File Type:pdf, Size:1020Kb
SS264W Tilted 1 kW Element ™ Pair Dual-Frequency Preliminary Wide-Beam performance — for tuna and marlin fishing. • Consists of two transducers: See the Wider Picture • SS264 50 kHz wide-beam Airmar has taken the SS270W wide-beam thru-hull • SS264 200 kHz wide-beam and split it apart into a Tilted Element™ transducer pair. The low-profile design is perfect for fast, trailered, • Excellent fish detection in tournament, sport-fishing vessels that cannot install a shallow to mid-water depths thru-hull with a high-performance fairing. These • Provides 4 times the transducers provide four times the beamwidth at beamwidth at 200 kHz than 200 kHz than other high-performance transducers. other high-performance This means marking more game fish and bait in a transducers larger area, increasing your catch. • Identical wide 25° beamwidths at 50 kHz and 200 kHz The Ultimate Split-Screen “Tunaducer” • Transducers can be purchased Since the beamwidths are the same at both as a pair for dual-frequency The high-performance wide-beam ceramic elements are tilted frequencies, a split-screen fishfinder display will clearly operation or individually as inside the housings, which compensates for your boats single-frequency units deadrise. This aims the beams straight toward the bottom, show the same water column and bottom coverage. resulting in strong echo returns and accurate depth readings. Fish will also appear as arches. More fish will be • No affect on your boats marked while trolling or underway. At anchor, see running performance which direction the baits and chum are flowing in the • Fixed 0°or 12° or 20° tilted current. Get the wider picture on your sounder with versions the SS264W pair. • Low-profile design leaves no protrusions below the hull • Interfaces to any 600 W or 1 kW sounder 25° 25° Wide Wide • Built-in temperature sensor 50 kHz 200 kHz SS264W Tilted 1 kW Element ™ Pair Dual-Frequency Technical Information Specifications SS264W Dimensions SS264W stainless steel transducer pair Frequencies Number of Beam Rated TVR RVR Elements and Width RMS Power Configuration (@-3dB) (W) 50 kHz-AWlq 25° 1 kW 161dB -175dB Spacer washer 200 kHz-BM 25° 1 kW 167dB -194dB Weight: . 2.7 kg (6 lb) 50 kHz 200 kHz 3 3/4-4 UNC threads Hull Deadrise Angle: . Up to 24° FOM -19 -27 1 ( 1 Q 4 15 4 8 . 13 mm 107 mm 6 6 mm m 7 (0.50”) (4.23”) ” m (0.25”) ) Spacer washer Viewable Diameter Based on Depth Depth 50 kHz 200 kHz 100’ 45’ 45’ Ø ( 1 5 3 . 3 Ø 149 mm 400’ 180’ 180’ 6 7 m ” (5.86”) ) 800’ 360’ 360’ m 1,000’ 450’ 450’ 92.25 mm (3.75”) hole size Directivity Pattern 50 kHz 10° 0° 10° -3dB Beamwidth 200 kHz 10° 0° 10° -3dB Beamwidth 20° 20° ... 25° 20° 20° ... 25° 30° 30° 30° 30° 40° -10dB 40° 40° -10dB 40° 50° -20dB 50° 50° -20dB 50° 60° -30dB 60° 60° -30dB 60° 70° 70° 70° 70° 80° -40dB 80° 80° -40dB 80° 90° 90° 90° 90° 140° 150° 160° 170° 180° 170° 160° 150° 140° 140° 150° 160° 170° 180° 170° 160° 150° 140° • The 200 kHz transducer can be added to existing B260 or M260 installations (switch box is needed) for the ultimate 200 kHz wide- and narrow-beam combination. This gives you the advantage to switch 200 kHz transducers based on the type of fishing on a given day. Standard 1 kW transducer SS264W twin wide-beam transducer • Transducers can be purchased as a pair for dual-frequency operation or individually as single-frequency 19° at 50 kHz, 6° at 200 kHz Identical, 25° beamwidths at 50 kHz and 200 kHz units. Performance 50 kHz 200 kHz Maximum 400 m to 610 m 100 m to 180 m Depth Range (1,350’ to 2,000’) (330’ to 600’) Different number of fish detected— See the same targets at both frequencies— ©Airmar Technology Corporation fish and bottom do not appear the same allows for easier species identification As Airmar constantly improves its products, all specifications are subject to change without notice. All Airmar products are designed to provide high levels of accuracy and reliability; however, they should only be used as aids to navigation and not as a replacement for traditional navigation aids and techniques. Tilted Element™ and Xducer ID® are trademarks and registered trademarks of Airmar Technology Corporation. Other company or product names mentioned in this document may be trademarks or registered trademarks of their respective companies, which are not affiliated with Airmar. SS264W_rD 04/08/08 Tel: 603.673.9570 • Fax: 603.673.4624 • www.airmar.com.