ETX-Proto ETX® Reference Carrier Board in ATX Form Factor

Total Page：16

File Type：pdf, Size：1020Kb

ETX-Proto ETX® Reference Carrier Board in ATX Form Factor Features ● Four PCI slots, three ISA slots, one Mini PCI slot ● POST code diagnostics ● Secondary Multi I/O ● Disk-On-Chip and CF card support ● Audio amplifier Specifications ● Core System ● Secondary Multi I/O Core Module Interface FDD ETX® ver 2.7 (3.0) Up to two floppy drives Board Form Factor Serial 304.8 mm x 190 mm (ATX) One 16550 compatible RS-232 ports (COM3), one RS-232/422/485 Compatible port (COM4) and one IrDA header Expansion Busses Four 32-bit PCI slots Parallel Three16-bit ISA slots Secondary parallel port One Mini PCI slot GPIO POST LEDs F75111R provides 20 GPIO. Onboard diagnostics for BIOS POST codes ● Audio IDE Support Type: Onboard amplifier with Line-In, Speaker-out and Mic (on rear I/O panel) Four IDE devices (two connectors) Line-In/Out, Speaker-out Parallel Port One port SSP, ECP, and EEP mode ● Video VGA: DB25 connector for analog VGA displays (on rear I/O panel) Serial Port LVDS: Onboard header supporting 36-bit LVDS Two 16550 compatible RS-232 ports (COM1/2) TV-out: Onboard header for PAL/NTSC TV Two additional ports COM3/4 from secondary multi I/O TV-out (NTSC, PAL), LVDS 32-bit KB/Mouse Two 6-pin mini DIN connectors (on rear I/O panel) ● POST Code Display LED: 2-digit 7-segment LED display USB Function: Displays POST (Power On Self Test) code Four ports (on rear I/O panel) v1.1 and v2.0 compatible LAN ● Power and Operation RJ-45 (on rear I/O panel) Connectors: ATX and AT onboard Switches: Onboard RESET and ATX switch Functional Diagram LPT2 COM3 IDE0 FDC37C869 secondary COM4 IDE1 Super I/O Power Signals FDD2 I I Ethernet S I 2 S ISA bus A S I2C bus A X4 A X 1 SMbus 2 3 F75111R DiskOnChip 20-bit GPIO 20-bit GPIO and watchdog socket W83782D H/W Monitor VGA Dual channel LVDS 4x USB Video-out Amplifier Audio Keyboard X1 X3 P Mouse CP PCI bus CP I P LPT1 I C I C 1 I FDD 2 3 4 COM1 Mini COM2 PCI IrDA Ordering Information ● ETX-Proto ETX® Reference Carrier Board in ATX form factor (includes CF socket assembly, UDMA HDD cable, SATA cable, FDD cable, TV-out cable) www.adlinktech.com All products and company name listed are trademarks or trade names of their respective companies. Updated Mar. 02, 2017. ©2017 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice..

Copy Link

Recommended publications

ET820 IP510 Baseboard
ETX ET820 Intel® Atom™ N270 ETX CPU Module w/ Baseboard Intel® 945GSE Chipset CPU IP510 Winbond W83627EHG Multi I/O DDR2 SO-DIMM Socket Intel® 945GSE Chipset Audio SATA II PCI to ISA ICH7M 10/100 LAN ICH7M SATA 8 42 2 11 USB COM SATAII Gbe10/100 LAN Features Mini ITX Nano ETX Express Baseboard ● Onboard Intel® Atom™ Processor N270, 1.6GHz, 533MHz FSB ● 1x DDR2 SO-DIMM, Max. 2GB Features ● Supports CRT and LVDS (18/24-bit dual channel) ● Winbond W83627EHG ● Integrated ICH7M 10/100BaseT LAN ● Watchdog timer, 4-in / 4-out digital I/O ● Watchdog timer, PCI to ISA ● 2x SATA , 2x IDE, 4x USB 2.0, 2x COM ● 2x Realtek 8111DL GbE LAN ● Edge connectors for PS/2, VGA, COM1, dual RJ45, 4x USB, audio connector (Line-out, Line-in & Mic.) Specifications ● 1x Mini-PCIe (x1), 1x PCI slots CPU Intel® Atom™ Processor N270, 1.6GHz ● Board connectors for 1x SATA, 1x LVDS, 2x USB, 1x LPT, System Memory 1x DDR2 SO-DIMM, Max. 2GB 3x COM and Nano ETX Express connector ® System Chipset Intel 945GSE + ICH7M, 533MHz FSB ● ATX power connector BIOS Award ● 170mm x 170mm Watchdog Timer 256 levels SSD DOM or CF socket on baseboard Ordering Information H/W Monitor Yes 4x ETX connectors for PCI bus, USB, audio, VGA/CRT, LVDS, LAN, IP510: Mini ITX Nano ETX Express baseboard Expansion Slot COM ports, LPT, IDE, PS/2 keyboard/mouse and ISA bus Intel® 945GSE integrated Graphics Media Accelerator 950 (GMA Dimensions Drawing VGA Controller 950), supports CRT/LVDS VGA Memory Shared memory - Max.
[Show full text]
ETX-DC® Document Revision: 1.18
ETX-DC® Document Revision: 1.18 If it’s embedded, it’s Kontron » Table of Contents « 1 User Information ............................................................................ 1 1.1 About This Document ................................................................................................................................. 1 1.2 Copyright Notice ....................................................................................................................................... 1 1.3 Trademarks .............................................................................................................................................. 1 1.4 Standards ................................................................................................................................................ 1 1.5 Warranty .................................................................................................................................................. 2 1.6 Technical Support ...................................................................................................................................... 2 2 Introduction ................................................................................. 3 2.1 ETX®-DC .................................................................................................................................................. 3 2.2 ETX® Documentation ................................................................................................................................. 3 2.3 ETX®
[Show full text]
COM Express® Basic, Compact, Mini • Qseven® • SMARC™
• • • • Computer Highlights Product ETX® SMARC™ Qseven COM Express® - ® Qseven® on (70 x 70 mm) - Module Basic SMARC™ (84 x 55 mm) , Compact COM Express® mini (84 x 55 mm) , Mini your specialist for embedded solutions COM Express® Compact (95 x 95 mm) 13.10.2017 COM Express® Basic (125 x 95 mm) Embedded Boards Industrial Mainboards Embedded Systems Accessories & IoT 2,5“ Pico-ITX™ Mini-ITX™ Embedded Box PCs Gateways 3,5“ Single Board Computer Micro-ATX Embedded Panel PCs Switches PC/104 Flex-ATX Embedded Server Router Slot SBC ATX Embedded Desktop PCs Memory, CPUs Computer-on-Module Digital Signage Player Cables Industrial Monitors Power Supplies Available Features & Options: Designed for Industrial Applications Long-term Availability Extended Temperature -40°C…+85°C Custom Design Design-in Support Fixed Bill of Material Kits (Board with OS, Display & Cables) EOL / PCN Handling your specialist for embedded solutions Systems - Custom - Standard Kit Solutions - Embedded Board - Operating System - Accessories e.g. Cable/Memory Distribution - Embedded Boards - Displays - Power Supplies your specialist for embedded solutions COM Express® Basic Type 6 & Type 7 COM Express® Basic (125 x 95 mm) your specialist for embedded solutions COM Express® Basic (95 x 125 mm) Intel® Core™ i CPU (Kaby Lake & Skylake) Product SOM-5898 COMe-bKL6 ET970 SOM-5897 COMe-bSL6 Vendor ADVANTECH Kontron iBASE ADVANTECH Kontron Type / Pin-out Type 6 R2.1 Type 6 Type 6 Type 6 Type 6 Intel® Xeon®, Core® i, Intel® Core® i, Xeon, Intel® Core™ i , Xeon (7th Intel® Core™
[Show full text]
Embedded Computing Highlights About Congatec 02|03
Product Guide Spring 2014 EMBEDDED COMPUTING HIGHLIGHTS About congatec 02|03 congatec AG is the preferred global vendor for innovative embedded solutionsto enable competitive advantages for our customers. Letter from the CEO Since the company’s inception in December Moreover, we bolstered our sales presence in adopting in order to not only offer benefits for 2004, congatec AG has established itself as a Australia and New Zealand through opening customers, but also to further tap target markets. globally recognized expert and reliable partner a new branch in Queensland. The Australian for embedded computer-on-modules solutions, market offers great potential, especially in the This would all be impossible without our coupled with excellent service and support. We segments of entertainment (gaming), agricultural employees’ commitment. I would like to take have secured second ranking worldwide in our technology, transportation management and this opportunity to again express my thanks to all market segment within the space of just eight medical technology, where congatec products congatec employees. In the passion with which years after our founding thanks to our clear can be deployed optimally. they pursue their daily activities, and through focus. customer-orientation, creativity and team Following the opening of the branches in Japan spirit, they have already brought the company congatec has already ranked among the Deloitte Australia, congatec is now represented with six to a leading position, and, together with the On our way to market leadership Technology Fast 50 for the second consecutive branches on four continents – Asia (Taiwan and company’s management, continue to stand for year1. This award distinguishes Germany’s Japan), Australia, Europe (Germany and the a sustainable and partnership-based corporate congatec AG, headquartered in Deggendorf, highest-growth technology companies.
[Show full text]
ETX Driving Embedded
An ACCES I/O Products Whitepaper ETX Driving Embedded I/O ACCES I/O Products, Inc., 10623 Roselle Street, San Diego, CA 92121 (858) 550-9559 • Fax (858) 550-7322 • [email protected] • www.accesio.com One of the fastest-growing concepts in the embedded world is the “computer-on-module” or COM.The COM approach takes the traditional concept of a computer motherboard with plug- in I/O modules and turns it around so that the motherboard, now called a baseboard, con- tains all the I/O and the CPU with its core support chips and memory plug in as a module. The result of this reversal is an approach that blends the advantages of custom design with those of standard products. Products based on the COM approach maintain long-term viabil- ity while retaining access to the latest in computer technology. One of the principal COM implementations available in the market is the Embedded Technology eXtended (ETX) specification, first developed by Kontron in early 2000. The ETX specification defines a module that is approximate- ly 100-mm square (see Figure 1) and contains the core of a personal computer (PC), including CPU, chipset, mem- aper ory, and core I/O capability. The core I/O includes Ethernet, graphics, USB, keyboard, mouse, and serial interfaces along with a PCI/ISA bus for connection to additional peripherals. Four surface-mount connectors route the mod- ule’s I/O to the baseboard, which can be designed to meet an application’s specific needs. P The original ETX specification was quickly adopted in the embedded industry and is now monitored by the ETX Industrial Group (ETXIG), which is dedicated to keeping the specification in line with advancing technology and market needs.
[Show full text]
Line Up-A Copy
Industrial Cloud Services Embedded Core Platforms Intelligent Self-Management Agent for Embedded Platforms One-Click Installation for Industrial Clouds Full Spectrum of Embedded Boards, A built-in chip with a standardized API provides a perfect solution and integrates several unique platform consolidating Featuring auto-synchronization and an intuitive interface, CloudBuilder functions to improve consistency, lighten the development effort and speed-up product time-to-market. provides resources and tools for developers to build their own cloud-based Modules and Software Services services in just 3 steps to effectively keep software current and up-to-date. Self Management • Dynamic Control Smart Fan • Multi-stage CPU Throttling • Smart Power Saving Mode Computer On Modules Embedded Single Board Computers Auto Protection MI/O Extension SBCs • Multi-level Watchdog • Real-time Detection & Response Industrial Motherboards Slot Single Board Computers Secure Storage Industrial Peripherals & Modules • Encrypted Data Space • EEPROM User Storage Regional Service & Customization Centers China Taiwan Netherlands Poland USA/ Canada Kunshan Taipei Eindhoven Warsaw Milpitas, CA Smart Access to Embedded Devices 86-512-5777-5666 886-2-2692-6076 31-40-267-7000 48-22-33-23-730 1-408-519-3800 SUSIAccess is an application for System Integrators that centralizes monitoring and management of embedded devices. By providing a ready-to-use remote access solution, system integrators can focus more on their own applications, and let Worldwide Offices SUSIAccess configure
[Show full text]
Kontron Design Guide ®
® Kontron Design Guide ® ETX® Document Revision 2.4 This page intentionally left blank Table of Contents Table of Contents 1 User Information ........................................................................................................ 6 1.1 Objective ......................................................................................................... 6 1.2 Target Audience ................................................................................................ 6 1.3 Assumptions .................................................................................................... 6 1.4 Scope.............................................................................................................. 6 1.5 About This Document ......................................................................................... 6 1.6 Copyright Notice ............................................................................................... 7 1.7 Trademarks ...................................................................................................... 7 1.8 Standards ........................................................................................................ 7 1.9 Warranty ......................................................................................................... 7 1.10 Technical Support .............................................................................................. 8 2 Introduction .............................................................................................................
[Show full text]
Specifications Ordering Information Features
Intel® Core™ 2 Duo/ Core™ Duo/ Celeron® M ETX ESM-945ETX Module with Intel® 945GME + ICH7-M Chipset Features n Supports Intel® Core™ 2 Duo/ Core™ Duo/ Celeron® M CPU ® n Intel 945GME/ ICH7-M Chipset Supports 65nm Intel® µFC-PGA 478 / n One 200-pin SODIMM Up to 2GB DDR2 SDRAM µFC-BGA 479 Core™ 2 Duo / Core™ Duo CPU n Dual View, Dual-channel LVDS 1 Embedded System n Realtek RTL8101L LAN Intel® 945GME Chipset 2 n 4 PCI, 1 ISA Bus Qseven Module n 2 SATA, 4 USB , 2 COM 3 2 SATA ETX/XTX COM Express 4 3.5” SBC ® ® Intel Dual Intel ICH7-M Chipset One 200-pin up to 2 GB 2 LVDS LAN 4 PCI 5 DDR2 SDRAM 945GME View EPIC ISA 2 SATA 4 USB 2 COM Bus 6 5.25” SBC Specifications 7 ATX System Audio • CPU Intel® Core™ 2 Duo/ Core™ Duo/ Celeron® M CPU Socket • Intel® ICH7-M 8 Chipset Micro Onboard Intel® Core™ 2 Duo L7400 1.5GHz CPU/ • AC97 Codec Realtek ALC203 ATX Onboard Intel® Celeron M ULV 423 1.06GHz CPU Note: T7400 Can't be Used Due to Power Issue • Audio Interface Line-in, Line-out & Mic-in 9 • BIOS Award 4Mbit Flash BIOS Mini ITX • System Chipset Intel® 945GME/ ICH7-M Ethernet • System Memory One 200-pin SODIMM Socket Supports Up to 2GB • LAN Realtek RTL8101L 10 DDR2 400/ 533/ 667 SDRAM Nano • Ethernet Interface 10/ 100 Base-Tx Fast Ethernet compatible ITX • Watchdog Timer Reset: 1sec. ~ 255min. and 1sec. or 1min./ step • Expansion 4 x PCI, 1 x ISA Bus 11 Mechanical & Environmental ACP • Power Requirement +5V I/O • Power Type AT/ ATX 12 • MIO 1 x EIDE (Ultra DMA 100), 2 x SATA, 1 x FDD/ LPT, Rack Mount • Operating Temperature 0 ~ 60°C (32 ~ 140°F)
[Show full text]
XTX Specification Rev
XTX™ Specification Revision 1.2 XTXTM Pinout, signal description and implementation guidelines XTX™ Specification Revision 1.2 XTX™ Specification Revision 1.2 Revision History Revision Date Author Revision History 1.0 July 13, 05 congatec AG/MAREKMICRO GmbH Initial release 1.0a June 8, 06 XTX™ Consortium Added information from XTX-Spec-Errata10. Changed format of document. 1.1 July 11, 06 XTX™ Consortium Added additional information about connectors X1, X3, and X4. 1.2 Dec. 5, 06 XTX™ Consortium Added pin 60 PP_TPM to table 2 and X2 connector schematic. Added description for PP_TPM to table 16. Added Hirose connector location peg hole tolerances note to section 1.3.1. Copyright © 2005 XTX™ Consortium XTX-Spec12 2/42 XTX™ Specification Revision 1.2 Preface ETX® Concept and XTXTM Extension The ETX® concept is an off the shelf, multi vendor, Single-Board-Computer that integrates all the core components of a common PC and is mounted onto an application specific carrier board. ETX® modules have a standardized form factor of 95mm x 114mm and have specified pinouts on the four system connectors that remain the same regardless of the vendor. The ETX® module provides most of the functional requirements for any application. These functions include, but are not limited to, graphics, sound, keyboard/mouse, IDE, Ethernet, parallel, serial and USB ports. Four ruggedized connectors provide the carrier board interface and carry all the I/O signals to and from the ETX® module. Carrier board designers can utilize as little or as many of the I/O interfaces as deemed necessary.
[Show full text]
ETX-AT-N270-SD Supports One SATA Channel Only) Supports One SATA (ETX-AT-N270-SD 2.0 Supports up to Four Ports V
ETX® Module with Intel® Atom™ Processor ETX-AT N270 and 945GSE / ICH7-M Chipset Features ® Intel Atom™ Processor N270 at 1.6 GHz ® Computer-On-Modules Intel 945GSE/ICH7-M chipset Up to 2 GB DDR2 533 MHz SDRAM Single/dual 18/24-bit LVDS and TV-out 2 SATA, 2 IDE (PATA), LAN, USB 2.0 Specifications Core System Multi I/O CPU BGA type IDE (PATA) Dual channel IDE with UDMA 33 Intel® Atom™ N270, 1.6 GHz with 512 KB L2 cache, 2.5 Watt SATA Two channels SATA 1.5 Gb/s with connectors on module On-die, primary 32-kB instruction cache and 24-kB, (ETX-AT-N270-SD supports one SATA channel only) write-back data cache USB Supports up to four ports v. 2.0 Hyperthreading (2-thread) support Advanced gunning transceiver logic (AGTL+) bus driver Super I/O technology Enhanced Intel SpeedStep® Technology Chipset W83627HG Source synchronous double-pumped (2x) Address Serial Two high speed RS-232C ports (COM1/COM2) Source synchronous quad-pumped (4x) Data IrDA Supports SIR IrDA 1.1 compliant C0 - C4 low power states supported Parallel SPP, EPP, and ECP mode (pin out shared with FDD) Memory Single SODIMM socket supporting : FDD One drive (pin out shared with LPT) - up to 2 GB of non-ECC, un-buffered, 533 MHz standard Keyboard & Mouse One PS/2 keyboard and one PS/2 mouse DDR2 SODIMM memory - Virtium SSDDR type module combining NAND flash SATA Solid State Drive (SATA SSD) and DDR2 memory on a single TPM SODIMM module (ETX-AT-N270-SD only) Chipset Infineon SLB9635TT1.2 ® Chipset Intel 945GSE Express Graphic Memory Controller Hub and Type TPM 1.2 Intel® I/O Controller
[Show full text]
ETX-Protoetx-Proto ETX® Prototype Board with ATX Form Factor
ETX-ProtoETX-Proto ETX® Prototype Board with ATX Form Factor Specifications 1 AdvancedTCA Core CoreCore Products Core Module Interface ETX® ver 2.7 (3.0) Board Form factor 304.8 mm x 190 mm (ATX) Expansion Busses Four 32-bit PCI™ slots 2 Three16-bit ISA slots 6U cPCI One MiniPCI™ slot SBC POST LEDS Onboard diagnostics for BIOS POST codes IDE Supports Four IDE devices (two connectors) Parallel Port One port SSP, ECP, and EEP mode 3 Serial Port Two 16550 compatible RS-232 ports (COM1/2) 6U cPCI Platforms Two additional ports COM3/4 from secondary multi I/O KB/Mouse Connector Two 6-pin mini DIN (on rear I/O panel) USB Four ports (on rear I/O panel) v1.1 and v2.0 compatible LAN RJ-45 (on Rear I/O panel) 4 Audio Line-In/Out, Speakers 3U cPCI SBC Video Video TV-Out (NTSC , PAL), LVDS 32-bit SecondarySecondary MultiMulti I/OI/O 5 3U cPCI Features FDD Up to two floppy drives Platforms Four PCI™, three ISA, one MiniPCI™ Serial One 16550 compatible RS-232 ports (COM3), one RS-232/422/485 compatible port (COM4) and one IrDA header POST Code Diagnostics Parallel Secondary parallel port E t h e r ne t Secondary Multi I/O Digital I/O 15-bit digital I/O 6 Disk-On-Chip and CF Card SBC & IMB Audio Amplifier AudioAudio A ud i o Type Onboard amplifier with Line-In, Speakers and Mic (on rear I/O panel) 7 Industrial Ordering Information Chassis ETX-Proto ETX® Prototype Board with ATX form factor VideoVideo CRT DB25 connector for CRT displays (on rear I/O panel) M u l t i I / O LVDS Onboard header supporting 36-bit LVDS 8 TV-OUT Onboard header for PAL/NTSC TV Computer On Modules POSTPOST CodeCode DisplayDisplay LED 2-digit 7-segment LED display 9 Function Displays POST (Power On Self Test) code Network Security Appliances M e c h a ni ca l a n d E nv i r o n m e nt a l PowerPower andand OperationOperation 10 Connectors ATX and AT (P8/P9) onboard Panel PC Switches Onboard RESET and onboard ATX switch 11 IPC Accessories www.adlinktech.com 8-16.
[Show full text]
Formaty Płyt Głównych
Formaty płyt głównych ₥@ʁ€₭ ‽ud3£k0 Urządzenia Techniki Komputerowej Spis treści • Budowa modułowa • DTX • Podział płyt głównych • ITX • IBM PC Motherboard • ETX • • XT XTX • WTX • AT • Płyta główna dla • LPX górników • NLX • Formaty • ATX przyszłościowe • BTX – ASUS Utopia 2 Koncepcja budowy modułowej • Budowa modułowa (model otwarty) polega na tym, że komputer można zestawić z wybranych elementów i dopasować do potrzeb (i finansów). – Poszczególne części muszą być ustandaryzowane, by pasowały do siebie. • Standardy płyt głównych pozwalają na umieszczanie określonych kart rozszerzeń. – Obudowy komputerów muszą być dopasowane do danego typu płyty. 3 Idea budowy modułowej 4 Wymiary płyty głównej Otwory na śrubki mocujące wymiarami do obudowy wymiarami Interfejsy zewnętrzne pasujące zewnętrzne Interfejsy Złącza, gniazda i wtyki znormalizowane 5 PODZIAŁ PŁYT GŁÓWNYCH 6 Płyta główna WTX ETX AT ATX BTX ITX DTX LPX NLX Baby AT Micro BTX Mini ITX Mini DTX Nano ITX Pico BTX Pico ITX EATX Ultra ATX Flex ATX EEATX Mobile ITX Micro ATX Mini ATX Neo ITX 7 Zestawienie płyt pod względem rozmiaru WTX 356×425 Micro ATX 244×244 ESM 149×71 AT 350×305 Pico BTX 267x203 Nano-ITX 120×120 EEATX 347x330 DTX 244×203 COM Express 125×95 Enhanced EATX Baby-AT 330×216 Flex ATX 229×191 ESM express 125×95 BTX 325×266 Mini-DTX 203×170 ETX/XTX 114×95 SSI CEB 305x267 EBX 203×146 Pico-ITX 100×72 EATX 305×330 Micro ATX 171×171 PC/104 (-Plus) 96×90 (Extended ATX) (min.) LPX 330×229 Mini-ITX 170×170 ESMini 95×55 ATX 305×244 Neo-ITX 170x 85 Qseven 70×70 micro BTX 264×267 GLKD-HTI 170x 85 mobile-ITX 60×60 NLX 254×228 EPIC (Express) 165×115 CoreExpress 58×65 Ultra ATX 244×367 Mini ATX 150×150 8 Rozmiary płyt głównych - porównanie 9 10 FORMATY PŁYT GŁÓWNYCH 11 Płyta główna IBM PC Motherboard • IBM „planar” Breadboard • Pierwsza nowoczesna płyta główna wyprodukowana przez IBM dla komputerów osobistych IBM PC w 1981 roku.
[Show full text]