DOCSLIB.ORG

ATP 4-43 Petroleum Supply Operations August 2015

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
ATP 4-43 Petroleum Supply Operations August 2015 ATP 4-43 Petroleum Supply Operations August 2015 DISTRIBUTION RESTRICTION. Approved for public release; distribution is unlimited. SUPERCESSION STATEMENT. This publication supersedes ATP 4-43 dated 21 July 2014, FM 10-67-1 dated 2 April 1998 and FM 10-602 dated 12 September 1996. Headquarters Department of the Army This publication is available at Army Knowledge Online (https://armypubs.us.army.mil/doctrine/index.html). To receive publishing updates, please subscribe at http://www.apd.army.mil/AdminPubs/new_subscribe.asp *ATP 4-43 (ATP 4-43) Army Techniques Publication Headquarters No. 4-43 Department of the Army Washington, DC, 06 August 2015 Petroleum Supply Operations Contents Page PREFACE............................................................................................................. vii INTRODUCTION ................................................................................................. viii Chapter 1 PETROLEUM SUPPLY OVERVIEW ................................................................. 1-1 Section I – Fundamentals of Petroleum Supply ............................................ 1-1 Petroleum Supply Description ............................................................................ 1-1 Principles of Petroleum Supply .......................................................................... 1-1 Fuels Management ............................................................................................. 1-3 Operational Energy ............................................................................................. 1-4 Section II – Petroleum Distribution Organizations ....................................... 1-4 Strategic Organizations ...................................................................................... 1-5 Operational Level Organizations ...................................................................... 1-11 Tactical Level Organizations ............................................................................ 1-15 Chapter 2 PETROLEUM SYSTEMS AND EQUIPMENT ................................................... 2-1 Section I – Storage and Distribution Systems............................................... 2-1 Storage Containers ............................................................................................. 2-2 Distribution Equipment ..................................................................................... 2-11 Pumps ............................................................................................................... 2-11 Meters ............................................................................................................... 2-12 Dispensing Nozzles .......................................................................................... 2-13 Inland Petroleum Distribution System .............................................................. 2-13 Fuel System Supply Point ................................................................................ 2-23 Modular Fuel System ........................................................................................ 2-25 Tank Vehicles and Tank Cars .......................................................................... 2-27 Assault Hoseline System .................................................................................. 2-33 Aviation Refueling Systems .............................................................................. 2-34 Extended Range Fuel System (ERFS II) .......................................................... 2-36 Section II – Quality Surveillance Systems ................................................... 2-37 Petroleum Quality Analysis System – Enhanced ............................................. 2-38 Distribution Restriction: Approved for public release; distribution is unlimited. *This publication supersedes ATP 4-43 dated 21 July 2014, FM 10-67-1 dated 2 April 1998 and FM 10-602 dated 12 September 1996. i Contents Fuel Additive Injector......................................................................................... 2-38 Test Kit, Aviation Fuel Petroleum ...................................................................... 2-38 Sampling and Gauging Kit, Petroleum .............................................................. 2-39 Filter Separators ................................................................................................ 2-39 Section III – Force Provider Fuel System ..................................................... 2-41 Chapter 3 – GENERAL PETROLEUM CONSIDERATIONS ...................................................... 3-1 Section I – Petroleum Properties ..................................................................... 3-1 Description of Fuels ............................................................................................ 3-1 Characteristics and Hazards ............................................................................... 3-3 Section II– Safety and Health ........................................................................... 3-6 Storage and Tank Vehicle ................................................................................... 3-6 Static Electricity ................................................................................................... 3-8 Grounding and Bonding ...................................................................................... 3-9 Personal Protection ........................................................................................... 3-11 Personal Protective Equipment and Individual Protective Equipment .............. 3-12 First Aid Measures ............................................................................................ 3-12 Petroleum Firefighting and Prevention.............................................................. 3-13 Environmental Considerations .......................................................................... 3-17 Aviation Refueling Special Considerations ....................................................... 3-20 Chapter 4 PERTROLEUM OPERATIONS .......................................................................... 4-1 Section I – Planning Considerations ............................................................... 4-1 Concept of Petroleum Support ............................................................................ 4-1 Consumption Estimates ...................................................................................... 4-2 Operational Environment .................................................................................... 4-2 Tampering, Pilferage and Security ...................................................................... 4-3 Section II – Class III – Bulk Petroleum Distribution ....................................... 4-3 Accountability ...................................................................................................... 4-4 Receipt ................................................................................................................ 4-9 Storage .............................................................................................................. 4-10 Distribution ........................................................................................................ 4-11 Section III – Quality Surveillance ................................................................... 4-13 Quality Surveillance Considerations ................................................................. 4-13 Samples Types and Sampling Procedures ....................................................... 4-14 Testing Petroleum Products .............................................................................. 4-17 Product Reclamation and Disposition ............................................................... 4-18 Filter Separators ................................................................................................ 4-19 Fuel Considerations .......................................................................................... 4-20 Section IV – Petroleum Pipeline Operations ................................................ 4-24 Site Selection .................................................................................................... 4-24 Site Preparation and Earthwork ........................................................................ 4-25 Duties of Pipeline and Terminal Personnel ....................................................... 4-26 Deployment and Layout .................................................................................... 4-27 Line Operations ................................................................................................. 4-29 Schedules ......................................................................................................... 4-33 Batching (Multi-product Pipeline) ...................................................................... 4-36 Dispatching and Records Control of Product in Pipelines ................................ 4-38 ii ATP 4-43 06 August 2015 Contents Section V – Class III Supply Point ................................................................ 4-40 Duties Of Class III Personnel ........................................................................... 4-40 Layout ............................................................................................................... 4-41 Operation .......................................................................................................... 4-41 Fuel System Supply Point ...............................................................................
Load more

Recommended publications
  • Certification Procedure 501 for Portable Fuel Containers and Spill-Proof Spouts Systems
    Certification Procedure 501 for Portable Fuel Containers And Spill-Proof Spouts Systems CP-501 NOTE: This is a new Certification Procedure. For clarity the proposed text is shown in normal type._This document is written in a style to indicate changes from the existing provisions. All existing regulatory language is indicated by plain type. All additions to the regulatory language are indicated by underlined type. All deletions to the regulatory language are indicated by strikeout. Adoption Date: July 26, 2006 Amended: December 9, 2016 TABLE OF CONTENTS 1. GENERAL INFORMATION AND APPLICABILITY 4 1.1. Legislative and Regulatory Requirements of Other State Agencies 4 1.2. Requirement to Comply with All Other Applicable Codes and Regulations 4 2. CERTIFICATION REQUIREMENTS 5 2.1. Openings 6 2.2. Color 6 2.3. Diurnal Emissions Standard 7 2.4. Durability 7 2.5. Leakage 7 2.6. Automatic Closure 7 2.7. Warranty 8 2.8. Operating and Maintenance Instructions 8 2.9. Materials Compatibility with Fuels 9 2.10. Optional Consumer Acceptance Program 9 3. SUBMITTING AN APPLICATION 11 4. APPLICATION REVIEW AND ACCEPTANCE 13 5. ENGINEERING EVALUATION 14 6. ALTERNATE TEST AND INSPECTION PROCEDURES 15 7. DURATION AND CONDITIONS OF CERTIFICATION 16 7.1. Duration of System Certification 16 7.2. Revocation of Certifications 16 California Air Resources Board Page 2 CP-501 8. Certification EXECUTIVE ORDER RENEWAL 16 8.1. Request for Renewal 17 8.2. Review Request 17 8.3. Evaluation of System Deficiencies 18 8.4. Letter of Intent 18 8.5. Renewal of Executive Order 18 8.6.
    [Show full text]
  • Operator's Manual ES-250 Shred “N” Vac®
    Operator’s Manual ES-250 Shred “N” Vac® The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Read and understand all provided literature before use. Failure to do so could result in serious injury. Note: This product complies with CAN ICES-2/NMB-2. X7501186103 © 11/19 ECHO Incorporated TABLE OF CONTENTS ES-250 TABLE OF CONTENTS Introduction.................................................................................................. 3 Servicing Information................................................................................... 4 Parts/Serial Number............................................................................. 4 Service ................................................................................................. 4 ECHO Consumer Product Support ...................................................... 4 Product Registration............................................................................. 4 Additional Literature ............................................................................. 5 Safety .......................................................................................................... 5 Manual Safety Symbols and Important Information ............................. 5 International Symbols........................................................................... 6 Personal Condition and Safety Equipment .......................................... 7 Equipment.........................................................................................
    [Show full text]
  • ENP-558 CNG Cylinder Inspection Manual
    CNG Fuel Cylinder Inspection Manual ENP-558 Rev. G: October 2019 ENP-558 Rev. G (Downloaded Copy is Not Controlled) 1 of 33 Table of Contents I. Proprietary Statement ....................................................................................................... 3 II. Trademark Notice .............................................................................................................. 3 III. Preface .............................................................................................................................. 3 IV. Warning Statements Used in this Manual ......................................................................... 3 V. Obtaining Product Support, Service or Parts .................................................................... 4 1. Safety ................................................................................................................................ 5 1.1. Qualified Personnel ........................................................................................................... 5 1.2. Safety Equipment and General Safety Rules .................................................................... 5 1.3. Emergency Response for Gas Leaks ............................................................................... 5 1.4. Vehicle Fire Procedures .................................................................................................... 6 1.5. Emergency Shut Down Procedure .................................................................................... 6 1.6. Inspect
    [Show full text]
  • Operator's Manual YARD VACUUM
    Operator's Manual 4.5 Horse Power YARD VACUUM Model No. 247.77010 CAUTION: Before using • Safety this product, read this • Assembly manual and follow all • Operation Safety Rules and • Maintenance Operating Instructions. • Parts • Espahol Sears, Roebuck and Co., Hoffman Estates, IL 60179, U.S.A. Visit our Sears website: www.sears.com/craftsmsn Printed in U.S.A. FORM NO. 770-10233D (7/00) Content Page Content Page Warranty 2 Service and Adjustments 12 Safety 3 Storage 14 Assembly 5 Troubleshooting 15 Operation 7 Parts List 16 Maintenance 10 Limited Warranty on Craftsman Yard Vacuum For one (1) year from the date of purchase, if this Craftsman Equipment is maintained, lubricated, and tuned up according to the instructions to the operator's manual, Sears will repair or replace free of charge any parts found to be defective in material or workmanship. Warranty service is available free of charge by returning Craftsman equipment to your nearest Sears Service Center. In-home warranty service is available but a trip charge will apply. This _/arranty applies only while this product is in the United States. This Warranty does not cover: Expendable items which become worn during normal use, such as spark plugs, air cleaners, belts, and oil filters. • Tire replacement or repair caused by punctures from outside objects, such as nails, thorns, stumps, or glass. • Repairs necessary because of operator abuse, including but not limited to, damage caused by objects, such as stones or metal debris, oversized stock, impacting objects that bend the frame or crankshaft, or over- speeding the engine.
    [Show full text]
  • Enclosure: Safety Evaluation Report
    SAFETY EVALAUTION REPORT Model No. TN-BGC1 Package French Certificate of Approval No. F/313/B(U)F-96, Revision Iak Docket No. 71-3034 SUMMARY By letter dated February 20, 2009, the U.S. Department of Transportation (DOT) requested that the Nuclear Regulatory Commission (NRC) review the Model No. TN-BGC1 package, authorized by French Certificate of Approval No. F/313/B(U)F-96, Revision Iak. DOT requested that the NRC provide a recommendation concerning revalidation of the certificate for import and export which include air transport. DOT also requested that the review be limited to the transport of Content No. 11 (solid non-irradiated uranium-bearing materials contained within a TN-90 secondary conditioning container) and Content No. 26 (non irradiated TRIGA fuel elements). DOT provided copies of English translations of the Certificate of Approval and the Safety Analysis Report (160 EMBAL PFM DET 08000157A). Based upon our review, the statements and representations in the documents described above, and for the reasons stated in this Safety Evaluation Report (SER), the staff finds that the TN- BGC1 package, as described in French Certificate of Approval No. F/313/B(U)F-96, Revision Iak, meets the requirements of paragraph 680 of International Atomic Energy Agency (IAEA) “Regulations for the Safe Transport of Radioactive Material,” TS-R-1, 1996 Edition (Revised), for Content No. 11 and Content No. 26, as limited with the following conditions: 1. For Content No. 11, the maximum fissile mass is not to exceed 5 kilograms U-235 per package. The mass of water must not exceed 2000 grams per package in the form of moisture content of wood.
    [Show full text]
  • Download Catalog
    Fall - Winter - 2021 Don’t Wait Until It Is Too Late! We just want to issue an availability warning. When the Colonial Pipeline hack occurred the sales of Jerry Cans went beserk! We sold every single can, regardless of size, within three days! (So did every other supplier). They were supposed to last us until late Fall. Now with Hurricane Ida, and the ensuing tornados and flooding in PA, NJ, and New York, we are getting deluged with orders once again. We have a container on the water, arriving mid-October, but there’s a hitch: the cost of shipping tripled! That will have to be reflected in the prices, obviously. Furthermore, the future prices look bleak. The cost of raw materials soared 27%, and that’ll make ‘em even more pricey on the next go-around! Therefore, we encourage you to stock up NOW, before you must pay a king’s ransom for these durable NATO Jerry Cans. 5 LITER CAN GP05 $49 10 LITER CAN GP10 $58 20 LITER CAN GP20 $65 SET OF 4 20 LITER CANS GP204 $239 GET YOUR SET OF 4 20 LITER CANS GP204 $239 Before It’s Issue 113 Too LATE! Issue 113 To Order Call: 800-225-9407 or Click: www.DeutscheOptik.com Satisfaction Guaranteed oy.., what a year so far! Lo- are short-handed, and like many prices have gone up a bit due to gistics have never been so other businesses can’t find any shipping and manufacturing costs, Bfouled up, not to mention more employees. The crew is (sheet steel sky-rocketed), we are the costs involved.
    [Show full text]
  • Fuel Cell Fill Procedure Author: Approved By: Revision: Effective Date
    Fuel Cell Procedure Document No.: Title/Description: 3350-00002 Fuel Cell Fill Procedure Author: Approved by: Revision: Effective Date: Kurt Stiffel 1-00 1.0 Reference Documents All released OOI documents in Alfresco 3161-20000 Fuel Cell Integration and Verification Plan 3350-00003 Fuel Cell Drain Procedure 3350-00004 Spill Response Procedure Fuel cell reference documents are located on VAULT at: Vault\Project_Files\Documentation\Power\Power Notebook\Fuel Cell\ 2.0 Definitions & Acronyms See Section 3.0 of document 3161-20000 3.0 Training Requirements All personnel that will handle the methanol (including contractors) at WHOI facilities are required to complete WHOI’s hazard communication and chemical safety online training and follow WHOI’s hazardous communication and chemical safety procedure. Contact the WHOI EH&S office for links to required training courses and documentation. Information can also be found at http://ehs.whoi.edu/ehs/. 4.0 Required PPE and Safety Notes All personnel within a 25 foot radius of the buoy are required to don splash protection goggles and chemical resistant gloves. These can include polyvinyl plastic, neoprene or rubber. Contact information for WHOI EH&S is 508-289-3347. Ensure operations are performed in compliance with applicable WHOI/SIO/OSU safety protocols, OOI Safety Plan (1006-10002) and CGSN EH&S Plan (3101-00009). Read and follow all safety warnings in the MSDS. Once the Safety Review in Section 8.1 is complete, have each operator sign-off in the signature block. 5.0 Required Tools & Equipment
    [Show full text]
  • Thermal Degradation of Poly (Ethylene Terephthalate) Waste Soft Drinks Bottles and Low Density Polyethylene Grocery Bags
    International Journal of Sustainable Energy and Environment Vol. 1, No. 3, April 2013, PP: 78 – 86, ISSN: 2327- 0330 (Online) Available online www.ijsee.com Research article Thermal Degradation of Poly (ethylene terephthalate) Waste Soft Drinks Bottles and Low Density Polyethylene Grocery Bags Moinuddin Sarker*, Mohammad Mamunor Rashid Natural State Research Inc, Department of Research and Development, 37 Brown House Road (2nd Floor), Stamford, CT-06902, USA, Phone: (203) 406 0675, Fax: (203) 406 9852 *E-mail: [email protected]; [email protected] Abstract Thermal degradation process for fuel production from 10 gm polyethylene terephthalate (PET) and 50 gm of low density polyethylene waste plastics was heated up in an atmospheric Pyrex glass reactor of laboratory-scale. PET waste plastic is combination of hydrocarbon, benzene, and oxygen group. PET plastic has high percentage of oxygen content. For experimental temperature range was 250 - 400 ºC and product fuel density was 0.76 gm/ml. Fuel production liquid conversion rate was 53. 5%, gas generated 11.83%, and wax and residue was 34.67%. Fuel was analysis by GC/MS, and GC/MS chromatogram compounds chain showed C3 to C22. Residue percentage is higher because PET has oxygen content. Light gases are combination of methane, ethane, propane and butane. Fuel can use for refinery process further modification and power plant for electricity generation. Copyright © IJSEE, all rights reserved. Keywords: thermal degradation, waste plastic, soft drink bottle, polyethylene, polyethylene terephthalate, GC/MS Introduction Polyethylene terephthalate (PET) is the most important polyester resin currently produced because of its excellent mechanical and chemical properties [1].
    [Show full text]
  • An Assessment of the Flammability and Explosion Potential of Transuranic Waste
    _,Z, I 0(.___ , / LA___ I IW&-,) - 4 0// /? /I I EEG-48 AN ASSESSMENT OF THE FLAMMABILITY AND I EXPLOSION POTENTIAL OF TRANSURANIC WASTE Matthew Silva Environmental Evaluation Group New Mexico I I I June 1991 10,9(15011" - Environmental Evaluation GroupReports > - - EEG-1 Goad, Donna, A Comoilation of Site Selection Criteria Considerations and Concerns Apoearina in the Literature on the DeeD Disoosal of Radioactive Wastes, June 1979 EEG-2 Review Comments on Geolouical Characterization Report. Waste Isolation Pilot Plant (WIPP) Site. Southeastern New Mexico SAND 78-1596. Volumes I and II, December 1978. EEG-3 Neill, Robert H., et al, (eds.) Radiological Health Review of the Draft Environmental Impact Statement (DOE/EIS-0026-D) Waste Isolation Pilot Plant. U. S. Department of Energy, August 1979. EEG-4 Little, Marshall S., Review Comments on the Report of the Steerina Committee on Waste Acceptance Criteria for the Waste Isolation Pilot Plant, February 1980. EEG-5 Channell, James K., Calculated Radiation Doses From Deposition of Material Released in Hypothetical Transportation Accidents Involving WIPP-Related Radioactive Wastes,, November 1980. EEG-6 Geotechnical Considerations for Radiolonical Hazard Assessment of WIPP. A Report of a Heetina Held on January 17-18. 1980, April 1980. EEG-7 Chaturvedi, Lokesh, WIPP Site and Vicinity Geolonical field Trip. A.Report of a Field Trio to the Proposed Waste Isolation Pilot Plant Prolect in Southeastern New Mexico. June 16 to 18. 1980. November 1980. EEG-8 Wofsy. Carla, The Significance of Certain Rustler Aguifer Parameters for Predicting Long-Term Radiation Doses from WIPP, September 1980. EEG-9 Spiegler, Peter, An Approach to Calculatina Upoer Bounds on Maximum Individual Doses From the Use of Contaminated Well Water Following a WIPP Repositorv Breach, September 1981.
    [Show full text]
  • NWCG Standards for Transporting Fuel, PMS
    A publication of the National Wildfire Coordinating Group NWCG Standards for Transporting Fuel PMS 442 OCTOBER 2019 NWCG Standards for Transporting Fuel October 2019 PMS 442 The NWCG Standards for Transporting Fuel establishes standards for the ground transportation of gasoline, mixed gas, drip torch fuel, and diesel in government vehicles driven by government employees. These standards are based as closely as practical on the U.S. Department of Transportation (DOT) and U.S. Department of Labor Occupational Safety and Health Administration (OSHA) regulations. National Wildfire Coordinating Group (NWCG) provides national leadership to enable interoperable wildland fire operations among federal, state, tribal, territorial, and local partners. NWCG operations standards are interagency by design; they are developed with the intent of universal adoption by the member agencies. However, the decision to adopt and utilize them is made independently by the individual member agencies and communicated through their respective directives systems. Fuel Geyser Awareness Sealed fuel containers have the potential to geyser when opened under certain conditions. Be aware of the dangers of fuel geysering to prevent serious burn injury. What is a fuel geyser? A fuel geyser is the forceful expulsion of fuel in vapor and liquid form due to the rapid depressurization of a fuel tank. It is similar to a boiling liquid expanding vapor explosion (BLEVE). What do you need to know to protect yourself? • Fuel geysers can occur anytime there is fuel, heat, and pressure from small gasoline- powered engines, chain saws, leaf blowers, or portable pumps, even when opening fuel transport containers. • Fuel geysers have resulted in injury when sprayed fuel and vapor have ignited.
    [Show full text]
  • 225 Part 1917—Marine Terminals
    Occupational Safety and Health Admin., Labor Pt. 1917 § 1915.1200 Hazard communication. 1917.43 Powered industrial trucks. 1917.44 General rules applicable to vehicles. NOTE: The requirements applicable to ship- 1917.45 Cranes and derricks (See also yard employment under this section are § 1917.50). identical to those set forth at § 1910.1200 of 1917.46 Load indicating devices. this chapter. 1917.47 Winches. [61 FR 31431, June 20, 1996] 1917.48 Conveyors. 1917.49 Spouts, chutes, hoppers, bins, and § 1915.1450 Occupational exposure to associated equipment. hazardous chemicals in labora- 1917.50 Certification of marine terminal ma- tories. terial handling devices (See also manda- tory appendix I, of this part). NOTE: The requirements applicable to ship- 1917.51 Hand tools. yard employment under this section are identical to those set forth at § 1910.1450 of Subpart D—Specialized Terminals this chapter. 1917.70 General. [61 FR 31431, June 20, 1996] 1917.71 Terminals handling intermodal con- tainers or roll-on roll-off operations. PART 1917—MARINE TERMINALS 1917.73 Terminal facilities handling menha- den and similar species of fish (see also § 1917.2, definition of hazardous cargo, Subpart A—General Provisions material, substance or atmosphere). Sec. 1917.1 Scope and applicability. Subpart E—Personal Protection 1917.2 Definitions. 1917.91 Eye and face protection. 1917.3 Incorporation by reference. 1917.92 Respiratory protection. 1917.4 OMB control numbers under the Pa- 1917.93 Head protection. perwork Reduction Act. 1917.94 Foot protection. 1917.5 Compliance duties owed to each em- 1917.95 Other protective measures. ployee. 1917.96 Payment for protective equipment.
    [Show full text]
  • Safety Analysis Report on HI-STAR 190 Package. (Revision 0.C)
    NON-PROPRIETARY VERSION SAFETY ANALYSIS REPORT on THE HI-STAR 190 PACKAGE (Revision 0.C) by Holtec International Holtec Center One Holtec Drive Marlton, NJ 08053 (holtecinternational.com) USNRC Docket No. : 71-9373 Holtec Report No. : HI-2146214 * Quality Designation : Safety Significant Copyright Notice and Notice of Proprietary Information This document is a copyrighted intellectual property of Holtec International. All rights reserved. Excerpting any part of this document, except for public domain citations included herein, by any person or entity except for the USNRC, a Holtec User Group (HUG) member company, or a foreign regulatory authority with jurisdiction over a HUG member’s nuclear facility without written consent of Holtec International is unlawful. * The safety designation is pursuant to Holtec International’s Quality Assurance Program. TABLE OF CONTENTS _______________________________________________________________________________ TOC ................................................................................................................................... T1 SAR REVISION SUMMARY ......................................................................................... S1 GLOSSARY AND NOTATIONS .................................................................................... G1 CHAPTER 1: GENERAL INFORMATION 1.0 OVERVIEW ................................................................................................................. 1.0-1 1.1 INTRODUCTION TO THE HI-STAR 190 PACKAGE .............................................
    [Show full text]