International Standards in process

An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.

Standards published

New International Standards published between 01 March and 31 March 2011

* Available in English only

** French version of standard previously published in English only

Price grou p

TC 2 Fasteners ISO 4014:2011 Hexagon head bolts — Product grades A and B G

ISO 4016:2011 Hexagon head bolts — Product grade C E

ISO 8765:2011 Hexagon head bolts with metric fine pitch thread — Product grades A and B F

ISO 14579:2011 Hexalobular socket head cap screws D

ISO 14580:2011 Hexalobular socket cheese head screws C

ISO 14583:2011 Hexalobular socket pan head screws C

ISO 14584:2011 Hexalobular socket raised countersunk head screws C

ISO 10510:2011 Tapping screw and washer assemblies with plain washers B

TC 4 Rolling bearings ISO 15:2011 Rolling bearings — Radial bearings — Boundary dimensions, general plan K

TC 17 Steel ISO 10893-1:2011 Non-destructive testing of steel tubes — Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness G

ISO 10893-2:2011 Non-destructive testing of steel tubes — Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections F

ISO 10893-3:2011 Non-destructive testing of steel tubes — Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal E and/or transverse imperfections ISO 10893-4:2011 Non-destructive testing of steel tubes — Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections D

ISO 10893-5:2011 Non-destructive testing of steel tubes — Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections D

ISO 10893-6:2011 Non-destructive testing of steel tubes — Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections G

ISO 10893-7:2011 Non-destructive testing of steel tubes — Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections J

ISO 10893-8:2011 Non-destructive testing of steel tubes — Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections E

ISO 10893-9:2011 Non-destructive testing of steel tubes — Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes E

ISO 10893- Non-destructive testing of steel tubes — Part 10: Automated full peripheral ultrasonic testing of seamless 10:2011 and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse F imperfections ISO 10893- Non-destructive testing of steel tubes — Part 11: Automated ultrasonic testing of the weld seam of welded 11:2011 steel tubes for the detection of longitudinal and/or transverse imperfections E

ISO 10893- Non-destructive testing of steel tubes — Part 12: Automated full peripheral ultrasonic thickness testing of 12:2011 seamless and welded (except submerged arc-welded) steel tubes C

TC 22 Road vehicles

ISO 7637-2:2011 * Road vehicles — Electrical disturbances from conduction and coupling — Part 2: Electrical transient conduction along supply lines only S

ISO 16844-2:2011 * Road vehicles — Tachograph systems — Part 2: Electrical interface with recording unit C

ISO 3888-2:2011 * Passenger cars — Test track for a severe lane-change manoeuvre — Part 2: Obstacle avoidance C

ISO 10392:2011 * Road vehicles — Determination of centre of gravity G

ISO 14792:2011 * Road vehicles — Heavy commercial vehicles and buses — Steady-state circular tests G

ISO 20176:2011 * Road vehicles — H-point machine (HPM-II) — Specifications and procedure for H-point determination V

TC 23 Tractors and machinery for agriculture and forestry

ISO 11783-5:2011 * Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 5: Network management N

ISO 14223-1:2011 Radiofrequency identification of animals — Advanced transponders — Part 1: Air interface M

TC 25 Cast irons and pig irons

ISO/TR 10809- * Cast irons — Part 2: Welding 2:2011 U

TC 28 Petroleum products and lubricants

ISO 26422:2011 * Petroleum and related products — Determination of shear stability of lubricating oils containing polymers — Method using a tapered roller bearing E

ISO Petroleum products — Fuels (class F) — Specifications of marine fuels — Technical Corrigendum 1 8217:2010/Cor free 1:2011 ISO/TS Petroleum and related products — Guidance for the maintenance and use of triaryl phosphate ester 11365:2011 turbine-control fluids K

ISO/TS Petroleum and related products — Guidance for in-servicing of lubricating oils for steam, gas and 11366:2011 combined-cycle turbines L

ISO 15380:2011 Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for categories HETG, HEPG, HEES and HEPR J

TC 29 Small tools

ISO 13399- * Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general 1:2006/Cor 2:2011 information model — Technical Corrigendum 2 free

ISO/TS 13399- * Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items — 2:2005/Cor 1:2011 Technical Corrigendum 1 free

ISO/TS 13399- * Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items — Technical 3:2007/Cor 1:2011 Corrigendum 1 free

ISO/TS 13399- * Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items — 4:2007/Cor 1:2011 Technical Corrigendum 1 free

ISO/TS 13399- * Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items — 5:2007/Cor 1:2011 Technical Corrigendum 1 free

ISO/TS 13399- * Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and 50:2007/Cor common concepts — Technical Corrigendum 1 free 1:2011

ISO/TS 13399- * Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems — 60:2007/Cor Technical Corrigendum 1 free 1:2011 ISO/TS 13399- Cutting tool data representation and exchange — Part 100: Definitions, principles and methods for 100:2008/Cor reference dictionaries — Technical Corrigendum 1 free 1:2011 TC 31 Tyres, rims and valves ISO 4223-1:2002 Definitions of some terms used in the tyre industry — Part 1: Pneumatic tyres F

TC 34 Food products

ISO * Artificial insemination of animals — Frozen semen of breeding bulls — Enumeration of living aerobic 8607:2003/Amd microorganisms — Amendment 1 XZ 1:2011 ISO/TS Animal and vegetable fats and oils — Determination of trace elements by inductively coupled plasma 21033:2011 optical emission spectroscopy (ICP-OES) D

ISO 24114:2011 * Instant coffee — Criteria for authenticity B

TC 44 Welding and allied processes ISO 544:2011 Welding consumables — Technical delivery conditions for filler materials and fluxes — Type of product, dimensions, tolerances and markings E

TC 45 Rubber and rubber products ISO 1652:2011 Rubber latex — Determination of apparent viscosity by the Brookfield test method E

TC 46 Information and documentation ISO 16245:2009 Information and documentation — Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents D

ISO 28560-1:2011 * Information and documentation — RFID in libraries — Part 1: Data elements and general guidelines for implementation N

ISO 28560-2:2011 * Information and documentation — RFID in libraries — Part 2: Encoding of RFID data elements based on rules from ISO/IEC 15962 S

ISO 28560-3:2011 * Information and documentation — RFID in libraries — Part 3: Fixed length encoding M

TC 61 Plastics ISO/TR 22007- * Plastics — Determination of thermal conductivity and thermal diffusivity — Part 5: Results of 5:2011 interlaboratory testing of poly(methyl methacrylate) samples Q

ISO 15015:2011 Plastics — Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) — Requirements and test methods F

TC 69 Applications of statistical methods

ISO 28801:2011 * Double sampling plans by attributes with minimal sample sizes, indexed by producer's risk quality (PRQ) and consumer's risk quality (CRQ) V

TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use

ISO 11040-2:2011 * Prefilled syringes — Part 2: Plunger stoppers for dental local anaesthetic cartridges C

ISO 13926-2:2011 * Pen systems — Part 2: Plunger stoppers for pen-injectors for medical use D

TC 79 Light metals and their alloys

ISO * Anodizing of aluminium and its alloys — Instrumental determination of image clarity of anodic oxidation 10216:2010/Cor coatings — Instrumental method — Technical Corrigendum 1 free 1:2011 TC 92 Fire safety ISO/TS Fire safety engineering — Performance of structures in fire 24679:2011 M

TC 121 Anaesthetic and respiratory equipment

ISO 80601-2- * Medical electrical equipment — Part 2-61: Particular requirements for basic safety and essential 61:2011 performance of pulse oximeter equipment X

TC 138 Plastics pipes, fittings and valves for the transport of fluids ISO 11296-1:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 1: General G

ISO 11296-4:2009 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes P

ISO 11298-1:2010 Plastics piping systems for renovation of underground water supply networks — Part 1: General G

ISO 11298-3:2010 Plastics piping systems for renovation of underground water supply networks — Part 3: Lining with close- fit pipes G

ISO 21751:2011 * Plastics pipes and fittings — Decohesion test of electrofusion assemblies — Strip-bend test D

TC 145 Graphical symbols

ISO 3864-4:2011 * Graphical symbols — Safety colours and safety signs — Part 4: Colorimetric and photometric properties of safety sign materials L

ISO Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public 7010:2003/Amd areas — Amendment 8 XZ 8:2011

TC 146 Air quality ISO 28439:2011 Workplace atmospheres — Characterization of ultrafine aerosols/nanoaerosols — Determination of the size distribution and number concentration using differential electrical mobility analysing systems H

TC 150 Implants for surgery ISO 7206-2:2011 Implants for surgery — Partial and total hip joint prostheses — Part 2: Articulating surfaces made of metallic, ceramic and plastics materials C

TC 161 Control and protective devices for gas and/or oil burners and appliances ISO 23550:2011 Safety and control devices for gas burners and gas-burning appliances — General requirements S

TC 163 Thermal performance and energy use in the built environment

ISO 18292:2011 * Energy performance of fenestration systems for residential buildings — Calculation procedure Q

TC 172 Optics and photonics ISO 14534:2011 Ophthalmic optics — Contact lenses and contact lens care products — Fundamental requirements E

TC 178 Lifts, escalators and moving walks

ISO * Lifts (elevators) — Design and development of programmable electronic systems in safety-related 22201:2009/Cor applications for lifts (PESSRAL) — Technical Corrigendum 1 free 1:2011

TC 188 Small craft ISO 12402- Personal flotation devices — Part 7: Materials and components — Safety requirements and test methods 7:2006/Amd — Amendment 1 L 1:2011

ISO 12402- Personal flotation devices — Part 8: Accessories — Safety requirements and test methods — 8:2006/Amd Amendment 1 XZ 1:2011

ISO 12402- Personal flotation devices — Part 9: Test methods — Amendment 1 9:2006/Amd XZ 1:2011

TC 190 Soil quality ISO 16703:2004 Soil quality — Determination of content of hydrocarbon in the range C10 to C40 by gas chromatography J

ISO 22155:2011 Soil quality — Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers — Static headspace method L

ISO 16072:2002 Soil quality — Laboratory methods for determination of microbial soil respiration K

TC 195 Building construction machinery and equipment ISO 18651-1:2011 Building construction machinery and equipment — Internal vibrators for concrete — Part 1: Terminology and commercial specifications H

TC 204 Intelligent transport systems

ISO 29281:2011 * Intelligent transport systems — Communications access for land mobiles (CALM) — Non-IP networking W

TC 206 Fine ceramics ISO 22197-2:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 2: Removal of acetaldehyde G

ISO 22197-3:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 3: Removal of toluene F

TC 213 Dimensional and geometrical product specifications and verification ISO 12180-1:2011 Geometrical product specifications (GPS) — Cylindricity — Part 1: Vocabulary and parameters of cylindrical form H

ISO 12180-2:2011 Geometrical product specifications (GPS) — Cylindricity — Part 2: Specification operators F

ISO 12181-1:2011 Geometrical product specifications (GPS) — Roundness — Part 1: Vocabulary and parameters of roundness G

ISO 12181-2:2011 Geometrical product specifications (GPS) — Roundness — Part 2: Specification operators E

ISO 12780-1:2011 Geometrical product specifications (GPS) — Straightness — Part 1: Vocabulary and parameters of straightness F

ISO 12780-2:2011 Geometrical product specifications (GPS) — Straightness — Part 2: Specification operators D

ISO 12781-1:2011 Geometrical product specifications (GPS) — Flatness — Part 1: Vocabulary and parameters of flatness F

ISO 12781-2:2011 Geometrical product specifications (GPS) — Flatness — Part 2: Specification operators G

ISO 25378:2011 Geometrical product specifications (GPS) — Characteristics and conditions — Definitions U

IULTCS International Union of Leather Technologists and Chemists Societies ISO 17234-2:2011 Leather — Chemical tests for the determination of certain azo colorants in dyed leathers — Part 2: Determination of 4-aminoazobenzene H

JTC 1 Information technology

ISO/IEC * Information technology — Universal Coded Character Set (UCS) 10646:2011 U

ISO/IEC * Software engineering — COSMIC: a functional size measurement method 19761:2011 G

ISO/IEC/IEEE * Systems and software engineering — Vocabulary 24765:2011 XK

ISO/IEC * Systems and software engineering — Systems and software Quality Requirements and Evaluation 25010:2011 (SQuaRE) — System and software quality models Q

ISO/IEC 10373- * Identification cards — Test methods — Part 8: USB-ICC 8:2011 Q

ISO/IEC 24727- * Identification cards — Integrated circuit card programming interfaces — Part 5: Testing procedures 5:2011 XH

ISO/IEC * Information technology — Storage management 24775:2011 XU

ISO/IEC 9797- * Information technology — Security techniques — Message Authentication Codes (MACs) — Part 1: 1:2011 Mechanisms using a block cipher R

ISO/IEC * Information technology — Security techniques — Guidelines for information and communication 27031:2011 technology readiness for business continuity R

ISO/IEC 23005- * Information technology — Media context and control — Part 1: Architecture 1:2011 L

ISO/IEC 18046- * Information technology — Radio frequency identification device performance test methods — Part 2: Test 2:2011 methods for interrogator performance L

ISO/IEC * Information technology — Automatic identification and data capture techniques — GS1 DataBar bar code 24724:2011 symbology specification W

ISO/IEC 29109- * Information technology — Conformance testing methodology for biometric data interchange formats 5:2011 defined in ISO/IEC 19794 — Part 5: Face image data M

Standards confirmed The following International Standards are confimred for a five year period:

TC 4 Rolling bearings

ISO 1132-2:2001 (reconfirmed)

TC 5 Ferrous metal pipes and metallic fittings

ISO 228-1:2000 (reconfirmed)

TC 20 Aircraft and space vehicles

ISO 461-2:1985 (reconfirmed)

ISO 14953:2000 (reconfirmed) ISO 21349:2007 ISO 21350:2007

TC 21 Equipment for fire protection and fire fighting

ISO 6184-2:1985 (reconfirmed)

ISO 6184-4:1985 (reconfirmed)

TC 22 Road vehicles

ISO 3958:1996 (reconfirmed)

TC 23 Tractors and machinery for agriculture and forestry

ISO 5708:1983 (reconfirmed)

TC 34 Food products ISO 2171:2007

ISO 4112:1990 (reconfirmed) ISO 5529:2007

ISO 6322-2:2000 (reconfirmed)

ISO 6322-3:1989 (reconfirmed)

ISO 6540:1980 (reconfirmed)

ISO 15793:2000 (reconfirmed)

ISO 7516:1984 (reconfirmed)

ISO 9768:1994 (reconfirmed)

ISO 9884-1:1994 (reconfirmed)

ISO 9884-2:1999 (reconfirmed)

ISO 15598:1999 (reconfirmed)

ISO 6492:1999 (reconfirmed)

ISO 6496:1999 (reconfirmed)

ISO 14182:1999 (reconfirmed)

ISO 14797:1999 (reconfirmed) ISO 16472:2006 ISO 17375:2006

TC 35 Paints and varnishes

ISO 4626:1980 (reconfirmed)

ISO 12137-1:1997 (reconfirmed)

TC 37 Terminology and other language and content resources

ISO 12199:2000 (reconfirmed)

TC 39 Machine tools

ISO 3686-1:2000 (reconfirmed)

ISO 3686-2:2000 (reconfirmed) ISO 702-2:2007 ISO 702-3:2007 ISO 702-4:2004 ISO 3442-3:2007

TC 44 Welding and allied processes

ISO 9090:1989 (reconfirmed)

ISO 14744-2:2000 (reconfirmed)

ISO 14744-3:2000 (reconfirmed)

ISO 14744-4:2000 (reconfirmed)

ISO 14744-5:2000 (reconfirmed)

ISO 14744-6:2000 (reconfirmed)

TC 61 Plastics

ISO 1060-2:1998 (reconfirmed)

TC 77 Products in fibre reinforced cement ISO 22306:2007

TC 89 Wood-based panels ISO 12466-2:2007

TC 92 Fire safety

ISO 10294-3:1999 (reconfirmed) ISO 22899-1:2007

TC 98 Bases for design of structures ISO 22111:2007 ISO 21650:2007

TC 107 Metallic and other inorganic coatings

ISO 9587:2007 ISO 9588:2007 ISO 4524-2:2000 (reconfirmed)

ISO 4536:1985 (reconfirmed)

ISO 4538:1978 (reconfirmed)

ISO 4539:1980 (reconfirmed)

ISO 4541:1978 (reconfirmed)

ISO 4543:1981 (reconfirmed)

ISO 6988:1985 (reconfirmed)

ISO 10289:1999 (reconfirmed) ISO 10308:2006

ISO 10309:1994 (reconfirmed)

TC 108 Mechanical vibration, shock and condition monitoring

ISO 6954:2000 (reconfirmed)

ISO 8608:1995 (reconfirmed)

ISO 10816-6:1995 (reconfirmed) ISO 15230:2007

TC 110 Industrial trucks

ISO 15870:2000 (reconfirmed)

TC 114 Horology ISO 16253:2007

ISO 14368-1:2000 (reconfirmed)

TC 118 Compressors and pneumatic tools, machines and equipment ISO 15744:2002 ISO 17066:2007 ISO/TS 17104:2006

TC 122 Packaging

ISO 15119:2000 (reconfirmed)

TC 131 Fluid power systems

ISO 10763:1994 (reconfirmed) ISO 7789:2007 ISO 3724:2007

ISO/TR 16144:2002 (reconfirmed) ISO 16860:2005 ISO 23309:2007 ISO 10770-3:2007

TC 135 Non-destructive testing ISO/TS 22809:2007

TC 138 Plastics pipes, fittings and valves for the transport of fluids ISO 21138-1:2007 ISO 21138-2:2007 ISO 21138-3:2007

TC 145 Graphical symbols ISO 22727:2007

TC 150 Implants for surgery ISO 7197:2006

TC 162 Doors and windows

ISO 8248:1985 (reconfirmed)

ISO 8269:1985 (reconfirmed)

ISO 9380:1990 (reconfirmed)

TC 163 Thermal performance and energy use in the built environment

ISO 12575-2:2007

TC 165 Timber structures ISO 21887:2007

TC 178 Lifts, escalators and moving walks ISO/TR 11071-1:2004 ISO/TR 11071-2:2006

TC 184 Automation systems and integration ISO 19440:2007

TC 223 Societal Security

ISO/PAS 22399:2007

JTC 1 Information technology ISO/IEC 18028-4:2005 ISO/IEC TR 13818-5:2005

Standards withdrawn Period from 01 March to 31 March 2011

TC 17 Steel

ISO 9302:1994 (replaced by ISO 10893-1:2011)

ISO 9303:1989 (replaced by ISO 10893-10:2011)

ISO 9304:1989 (replaced by ISO 10893-2:2011)

ISO 9305:1989 (replaced by ISO 10893-10:2011)

ISO 9402:1989 (replaced by ISO 10893-3:2011)

ISO 9598:1989 (replaced by ISO 10893-3:2011)

ISO 9764:1989 (replaced by ISO 10893-11:2011)

ISO 9765:1990 (replaced by ISO 10893-11:2011)

ISO 10124:1994 (replaced by ISO 10893-8:2011)

ISO 10543:1993 (replaced by ISO 10893-12:2011)

ISO 11496:1993 (replaced by ISO 10893-8:2011)

ISO 12094:1994 (replaced by ISO 10893-9:2011)

ISO 12095:1994 (replaced by ISO 10893-4:2011)

ISO 12096:1996 (replaced by ISO 10893-6:2011)

ISO 13663:1995 (replaced by ISO 10893-8:2011)

ISO 13664:1997 (replaced by ISO 10893-5:2011)

ISO 13665:1997 (replaced by ISO 10893-5:2011)

TC 121 Anaesthetic and respiratory equipment

ISO 9919:2005 (replaced by ISO 80601-2-61:2011)

TC 213 Dimensional and geometrical product specifications and verification

ISO/TS 12180-1:2003 (replaced by ISO 12180-1:2011)

ISO/TS 12180-2:2003 (replaced by ISO 12180-2:2011)

ISO/TS 12181-1:2003 (replaced by ISO 12181-1:2011)

ISO/TS 12181-2:2003 (replaced by ISO 12181-2:2011)

ISO/TS 12780-1:2003 (replaced by ISO 12780-1:2011)

ISO/TS 12780-2:2003 (replaced by ISO 12780-2:2011)

ISO/TS 12781-1:2003 (replaced by ISO 12781-1:2011)

ISO/TS 12781-2:2003 (replaced by ISO 12781-2:2011)

JTC 1 Information technology

ISO/IEC 9126-1:2001 (replaced by ISO/IEC 25010:2011)