DOCSLIB.ORG

ERTMS Programme Signalling System Engineering Process Guideline Engineering Guidelines

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
ERTMS Programme Signalling System Engineering Process Guideline Engineering Guidelines ERTMS Programme Signalling System Engineering Process Guideline Engineering Guidelines 017 Updated document 16.12.2020 GRIGUN 16E Updated document 07.04.2020 INGGJO NEDJON KJHO 15E Updated document 05.02.2020 INGGJO NEDJON KJHO 00E First Issue 12.12.2020 JANRUN KJHO MAGHEG Revision Reason for issue Date Created by Contr. by Appr. by Title: Pages: 210 ERTMS Programme Produced by: Bane NOR Digitalisation and Technology Signalling System Engineering Process Guideline Engineering Guidelines Prod.doc.no.: Rev: Replaces: Replaced by: Project: ERTMS Programme Document number: Revision: Area: Trackside ERP-30-S-00097 017 Operator's document no.: Operator's rev.: NA NA Page: 2 of 210 ERTMS Signalling System Doc. No: ERP-30-S-00097 Programme Engineering Guidelines Rev: 017 Date: 16.12.2020 This document was created by DOORS and updated by the author with correct revision details, signatures, operator details, and other empty fields not provided by DOORS. The DOORS module name is: Signalling System Engineering Guidelines The DOORS baseline is: Current The DOORS export date: 2020 12 16 Page: 3 of 210 ERTMS Signalling System Doc. No: ERP-30-S-00097 Programme Engineering Guidelines Rev: 017 Date: 16.12.2020 LIST OF CONTENTS 1 INTRODUCTION ............................................................................................................................ 8 1.1 Background ............................................................................................................................ 8 1.2 Purpose and scope ................................................................................................................ 9 1.3 Technical drawings in AutoCAD ............................................................................................ 9 1.4 Guideline for interlocking parameteres .................................................................................. 9 1.5 Further work ........................................................................................................................... 9 1.6 How to use document ............................................................................................................ 9 1.7 English-Norwegian translations ........................................................................................... 11 1.8 Definitions ............................................................................................................................ 12 1.9 Change description .............................................................................................................. 12 2 MARKER BOARDS ...................................................................................................................... 13 2.1 General ................................................................................................................................ 13 2.2 Placing ................................................................................................................................. 14 2.2.1 Placement in tunnels ....................................................................................................... 18 2.2.2 Placement on fixed bridges ............................................................................................. 19 2.3 Boards at stations ................................................................................................................ 20 2.3.1 Signal 106: Stop for shunting board ................................................................................ 21 2.3.2 Entry marker board .......................................................................................................... 22 2.3.3 Exit marker board ............................................................................................................ 23 2.3.4 Inner marker boards ........................................................................................................ 23 2.4 Dead end tracks ................................................................................................................... 24 3 SHUNTING SIGNALS .................................................................................................................. 25 4 TRACK VACANCY PROVING ..................................................................................................... 27 4.1 Axle counter at signalling point ............................................................................................ 27 4.2 Points ................................................................................................................................... 28 4.3 Derailers ............................................................................................................................... 33 4.4 Diamond crossing ................................................................................................................ 34 4.5 Cross-over ........................................................................................................................... 34 4.6 Level crossing ...................................................................................................................... 35 4.7 Dead end tracks ................................................................................................................... 36 5 BALISES ....................................................................................................................................... 37 6 POINT MACHINES ....................................................................................................................... 38 6.1 Replacement of existing point machines ............................................................................. 38 6.2 Equipping of points .............................................................................................................. 39 6.2.1 Point with grade 1:9 ......................................................................................................... 39 6.2.2 Point with grade between 1:12 and 1:18.4 ...................................................................... 41 6.2.3 Point with grade 1:26.1 .................................................................................................... 42 6.2.4 Single and double slip diamond crossing ........................................................................ 42 7 DERAILERS ................................................................................................................................. 43 8 LOCALLY OPERATED POINTS AND DERAILERS .................................................................... 44 9 KEY LOCK .................................................................................................................................... 45 10 LOCAL CONTROL PANEL FOR POINTS ................................................................................... 46 10.1 Criteria for local control panel for points .............................................................................. 46 11 CRANK CABINETS ...................................................................................................................... 46 12 LEVEL CROSSINGS .................................................................................................................... 48 12.1 Level crossing system ......................................................................................................... 49 12.1.1 Signal E36: Level crossing board ............................................................................... 50 12.1.2 Road signal ................................................................................................................. 50 12.1.3 Acoustic signals .......................................................................................................... 51 12.1.4 Barrier ......................................................................................................................... 51 12.1.5 LX technical house ...................................................................................................... 52 Page: 4 of 210 ERTMS Signalling System Doc. No: ERP-30-S-00097 Programme Engineering Guidelines Rev: 017 Date: 16.12.2020 12.2 Warning lamp ....................................................................................................................... 52 13 AVALANCHE DETECTION .......................................................................................................... 53 14 TUNNEL GATES .......................................................................................................................... 54 15 MOVABLE BRIDGE ..................................................................................................................... 55 16 INFLUENCE ON OTHER DISCIPLINES...................................................................................... 56 17 TRAIN ROUTES ........................................................................................................................... 56 17.1 Flank protection ................................................................................................................... 58 17.1.1 Marker board for flank protection ................................................................................ 58 17.1.2 Point for flank protection ............................................................................................. 59 17.1.3 Derailer for flank protection ........................................................................................
Load more

Recommended publications
  • ERTMS/ETCS Railway Signalling
    Appendix A ERTMS/ETCS Railway Signalling Salvatore Sabina, Fabio Poli and Nazelie Kassabian A.1 Interoperable Constituents The basic interoperability constituents in the Control-Command and Signalling Sub- systems are, respectively, defined in TableA.1 for the Control-Command and Sig- nalling On-board Subsystem [1] and TableA.2 for the Control-Command and Sig- nalling Trackside Subsystem [1]. The functions of basic interoperability constituents may be combined to form a group. This group is then defined by those functions and by its remaining exter- nal interfaces. If a group is formed in this way, it shall be considered as an inter- operability constituent. TableA.3 lists the groups of interoperability constituents of the Control-Command and Signalling On-board Subsystem [1]. TableA.4 lists the groups of interoperability constituents of the Control-Command and Signalling Trackside Subsystem [1]. S. Sabina (B) Ansaldo STS S.p.A, Via Paolo Mantovani 3-5, 16151 Genova, Italy e-mail: [email protected] F. Poli Ansaldo STS S.p.A, Via Ferrante Imparato 184, 80147 Napoli, Italy e-mail: [email protected] N. Kassabian Ansaldo STS S.p.A, Via Volvera 50, 10045 Piossasco Torino, Italy e-mail: [email protected] © Springer International Publishing AG, part of Springer Nature 2018 233 L. Lo Presti and S. Sabina (eds.), GNSS for Rail Transportation,PoliTO Springer Series, https://doi.org/10.1007/978-3-319-79084-8 234 Appendix A: ERTMS/ETCS Railway Signalling Table A.1 Basic interoperability constituents in the Control-Command
    [Show full text]
  • EULYNX the Next Generation Signalling Strategy for Europe
    European Initiative Linking Interlocking Subsystems EULYNX The next generation signalling strategy for Europe Signalling Seminar IRSE ITC – JR East Frans Heijnen 7 April 2016 With thanks to Maarten van der Werff What would you do? European Initiative Linking Interlocking Subsystems Situation: • You are an infra manager (…. passenger, tax payer) • Expectations concerning signalling • Huge installed base • Many generations of equipment • Obsolete within 10..20 years • Not enough budget to replace And you know: “At all European railways these problems are similar …” EULYNX 2 What is the problem? European Initiative Linking Interlocking Subsystems • Each railway project adds new assets to become obsolete again • They get overage sooner than expected • Costs depend on whoever was chosen in the past as the supplier of the system • There are potential savings but the railway is stuck with current solutions • But you don’t have a strategy for a new solution EULYNX 3 EULYNX. What is EULYNX? European Initiative Linking Interlocking Subsystems EULYNX is the strategic approach for standardisation of signalling systems Because standardisation is a key factor to reduce: • A ‘technology zoo’ with many different systems, • The number of multiple incompatible interfaces • The cost involved in replacing and renewal EULYNX 4 The vision that becomes reality European Initiative Linking Interlocking Subsystems By systems engineering and the development process • Use a common architecture • With a common apportionment of functionalities • Define standardised
    [Show full text]
  • Road Level Crossing Protection Equipment
    Engineering Procedure Signalling CRN SM 013 ROAD LEVEL CROSSING PROTECTION EQUIPMENT Version 2.0 Issued December 2013 Owner: Principal Signal Engineer Approved by: Stewart Rendell Authorised by: Glenn Dewberry Disclaimer. This document was prepared for use on the CRN Network only. John Holland Rail Pty Ltd makes no warranties, express or implied, that compliance with the contents of this document shall be sufficient to ensure safe systems or work or operation. It is the document user’s sole responsibility to ensure that the copy of the document it is viewing is the current version of the document as in use by JHR. JHR accepts no liability whatsoever in relation to the use of this document by any party, and JHR excludes any liability which arises in any manner by the use of this document. Copyright. The information in this document is protected by Copyright and no part of this document may be reproduced, altered, stored or transmitted by any person without the prior consent of JHR. © JHR UNCONTROLLED WHEN PRINTED Page 1 of 66 Issued December 2013 Version 2.0 CRN Engineering Procedure - Signalling CRN SM 013 Road Level Crossing Protection Equipment Document control Revision Date of Approval Summary of change 1.0 June 1999 RIC Standard SC 07 60 01 00 EQ Version 1.0 June 1999. 1.0 July 2011 Conversion to CRN Signalling Standard CRN SM 013. 2.0 December 2013 Inclusion of Safetran S40 and S60 Mechanisms, reformatting of figures and tables, and updating text Summary of changes from previous version Section Summary of change All Include automated
    [Show full text]
  • Balise Lifecheck the Control of Balises Is Mainly Manual and Often Basic
    utomation of Balise A maintenance Balise LifeCheck The control of balises is mainly manual and often basic. There are several tools available on the market to help performing balise maintenance, but a vast majority of them follow a corrective approach. ERTMS Solutions’ BaliseLifeCheck is the only on-board tool able to do predictive maintenance. he Tsolution • Compatibility with all balises’ and legacy KER balises (KVB, EBICAB,...) • Geolocalization of the balises and creation of a cartography • Detection of possible Big Metal Masses on the track that will affect BTM performances • Computation of a signature on measurements • Auto-marking on all balises matching signature • Generation of a full report after each test journey The BaliseLifeCheck is a preventive balise measurement instrument that can be used on both diagnostic and commercial trains. While capable of measuring balise, the BaliseLifeCheck is also highly customizable and can be set-up to deliver preventive maintenance to any ‘legacy’ Automatic Train Protection (ATP) balises, regardless if they are fitted or not with ERTMS. The Benefits On-board The system has been designed to be installed on-board a test or maintenance train which purpose is to analyze test tracks and active lines. Measurement It measures key electrical parameters of the up link signal and verifies if they comply with the requirements of Subset-036 in the case of ETCS balises. In this case some measurements/tests are performed against requirements of Subset-085. Diagnosis The main goal of the tool is to provide measurements and evidences which assess the correct behavior of balises that are already deployed on the field.
    [Show full text]
  • Level Crossing Technology 65 Selcat Project: Level Crossing Technology 67 1
    Editors Very year more than 1200 El-Miloudi EL-KOURSI (INRETS) accidents occur at level Louahdi KHOUDOUR (INRETS) crossings in the european E Neda LAZAREVIC (INRETS) union with more than 330 people killed. Level crossings have been Laszlo TORDAI (UIC) identified as being a particular weak Roman SLOVÁK (TUBS) point in road infrastructure seriou- sely affecting road safety. SAFER EUROPEAN LEVEL CROSSING APPRAISAL These procedings present the first results of the SELCAT project AND TECHNOLOGY “Safer European Level Crossing Appraisal And Technology” funded by the European commission. EUROPEAN LEVELAPPRAISAL CROSSING TECHNOLOGY AND SAFER Actes n°117 First Workshop Mai 2008 “Appraisal” Prix : 15,24 ¤ May 16th 2007 Editors 1 7 Villeneuve d’Ascq (France) ° 1 El-Miloudi EL-KOURSI INRETS-ESTAS N S Louahdi KHOUDOUR INRETS-ESTAS E T Neda LAZAREVIC INRETS-ESTAS °117 C Laszlo TORDAI UIC A Roman SLOVÁK TUBS INRETS n ISSN 0769-0266 ISBN 978-2-85782-663-7 Actes LES COLLECTIONS DE L’INRETS Conformément à la note du 04/07/2014 de la direction générale de l'Ifsttar précisant la politique de diffusion des ouvrages parus dans les collections éditées par l'Institut, la reproduction de cet ouvrage est autorisée selon les termes de la licence CC BY-NC-ND. Cette licence autorise la redistribution non commerciale de copies identiques à l’original. Dans ce cadre, cet ouvrage peut être copié, distribué et communiqué par tous moyens et sous tous formats. Attribution — Vous devez créditer l'Oeuvre et intégrer un lien vers la licence. Vous devez indiquer ces informations par tous les moyens possibles mais vous ne pouvez pas suggérer que l'Ifsttar vous soutient ou soutient la façon dont vous avez utilisé son Oeuvre.
    [Show full text]
  • ERTMS/ETCS - Indian Railways Perspective
    ERTMS/ETCS - Indian Railways Perspective P Venkata Ramana IRSSE, MIRSTE, MIRSE Abstract nal and Balise. Balises are passive devices and gets energised whenever Balise Reader fitted on Locomo- European Railway Traffic Management System tive passes over it. On energisation, balises transmits (ERTMS) is evolved to harmonize cross-border rail telegrams to OBE. Telegram may consist of informa- connections for seamless operations across European tion about aspect of Lineside Signal, Gradients etc., nations. ERTMS is stated to be the most performant Balises are generally grouped and unique identifica- train control system which brings significant advan- tion will be provided to each balise. It helps to detect tages in terms of safety, reliability, punctuality and the direction of train. There four types of balises ex- traffic capacity. ERT.MS is evolving as a global stan- ist based their usage - Switchable, Infill, Fixed and dard. Many countries outside Europe - US, China, Repositioning balises. Switchable balises will be pro- Taiwan, South Korea and Saudi Arabia have adopted vided near lineside signals and they transmit aspect ERTMS standards for train traffic command and con- of lineside signal, permanent speed restrictions, gra- trol. dient information etc., Infill balises are provided in advance of signals to convey aspect of lineside signals earlier than Switchable balises. Fixed balises convey 1 Introduction information in regard to temporary speed restrictions and Repositioning balises provides data corrections. Signalling component of ERTMS has basically Balises transmit data in long or short telegrams four components - European Train Control System and those pertaining to direction. They are of two (ETCS) with Automatic Train Protection System, types - standard and reduced.
    [Show full text]
  • TRANSMISSION MODULE (STM) – EBICAB GENERAL TECHNICAL REQUIREMENTS Version 100 200 E 004 V
    Approved Approved SPECIFIC TRANSMISSION MODULE (STM) – EBICAB GENERAL TECHNICAL REQUIREMENTS Version 100 200 E 004 v. 6.1 GRS STM General Technical Requirements Specification TR GRS v6.1 2017-05-12 Sign:______ Sign:______ Document Modification History Version Modification Valid from Prepared Approved Updated requirements for Baseline 3 accor- M Olsson, 6.1 12 Maj 2017 ding to [STM-Delta-FRS-B3-List-v0.12]. Trafikverket Updated requirements for Baseline 3 accor- 6 ding to [STM-Delta-FRS-B3-List-v0.06]. 10 Oct.2014 B Bryntse, ÅF Updated requirements for Baseline 2 accor- 5.2 ding to [STM-Delta-FRS-List-v1.26] 8 Oct 2014 B Bryntse, ÅF Updated or new national requirements: B Bryntse, 5.1 G64, G57A, G57B. Index chapter added. 28.10.2009 Improved format of text and headers. Teknogram 5.0 Update of national requirements 26.6.2009 S Wallin 4.2 “STM Delta-GRS-List ver A” is introduced K.Hallberg 4.1 Final corrections 15.2.2007 U.Svensson F. Åhlander 4.0 I/F C deleted, recorder info changed U.Svensson Changes according to STM National, 3.0 new I/F F U.Svensson 2.1 Clarification G 58, G34 and G35 15.4.2003 J Öhrström S-H Nilsson 2.0 Added info regarding radio I/F chapter 2.3 20.6.2002 F Åhlander S-H Nilsson 1.4 For approval by RHK, JBV, BV 6.6.2002 F Åhlander S-H Nilsson EBICAB STM General technical Requirements Specification – 100 200 E 004 Version 6.1 100 200 E 004 Version 6.1 Page 3 (35) EBICAB STM General Technical Requirements Specification List of contents 1 INTRODUCTION...................................................................5 1.1 Applicable standards ....................................................................................5 1.2 List of definitions ...........................................................................................7 1.3 System definition ...........................................................................................8 2 INTERFACES ....................................................................
    [Show full text]
  • LNW Route Specification 2017
    Delivering a better railway for a better Britain Route Specifications 2017 London North Western London North Western July 2017 Network Rail – Route Specifications: London North Western 02 SRS H.44 Roses Line and Branches (including Preston 85 Route H: Cross-Pennine, Yorkshire & Humber and - Ormskirk and Blackburn - Hellifield North West (North West section) SRS H.45 Chester/Ellesmere Port - Warrington Bank Quay 89 SRS H.05 North Transpennine: Leeds - Guide Bridge 4 SRS H.46 Blackpool South Branch 92 SRS H.10 Manchester Victoria - Mirfield (via Rochdale)/ 8 SRS H.98/H.99 Freight Trunk/Other Freight Routes 95 SRS N.07 Weaver Junction to Liverpool South Parkway 196 Stalybridge Route M: West Midlands and Chilterns SRS N.08 Norton Bridge/Colwich Junction to Cheadle 199 SRS H.17 South Transpennine: Dore - Hazel Grove 12 Hulme Route Map 106 SRS H.22 Manchester Piccadilly - Crewe 16 SRS N.09 Crewe to Kidsgrove 204 M1 and M12 London Marylebone to Birmingham Snow Hill 107 SRS H.23 Manchester Piccadilly - Deansgate 19 SRS N.10 Watford Junction to St Albans Abbey 207 M2, M3 and M4 Aylesbury lines 111 SRS H.24 Deansgate - Liverpool South Parkway 22 SRS N.11 Euston to Watford Junction (DC Lines) 210 M5 Rugby to Birmingham New Street 115 SRS H.25 Liverpool Lime Street - Liverpool South Parkway 25 SRS N.12 Bletchley to Bedford 214 M6 and M7 Stafford and Wolverhampton 119 SRS H.26 North Transpennine: Manchester Piccadilly - 28 SRS N.13 Crewe to Chester 218 M8, M9, M19 and M21 Cross City Souh lines 123 Guide Bridge SRS N.99 Freight lines 221 M10 ad M22
    [Show full text]
  • Western Route Strategic Plan Version 8.0: Delivery Plan Submission March 2019
    Western Route Strategic Plan Version 8.0: Delivery Plan submission March 2019 Western Route Strategic Plan Contents Foreword and summary ........................................................................................................................................................................................................... 3 Route objectives ..................................................................................................................................................................................................................... 10 Safety ..................................................................................................................................................................................................................................... 14 Train performance .................................................................................................................................................................................................................. 19 Locally driven measures ........................................................................................................................................................................................................ 24 Sustainability & asset management capability ....................................................................................................................................................................... 27 Financial performance ...........................................................................................................................................................................................................
    [Show full text]
  • Mandatory Requirements for Signalling Safeworking Procedures Version 2.0 Issued Date: 26 May 2015
    T HR SC 02000 ST Standard Mandatory Requirements for Signalling Safeworking Procedures Version 2.0 Issued date: 26 May 2015 Important Warning This document is one of a set of standards developed solely and specifically for use on public transport assets which are vested in or owned, managed, controlled, commissioned or funded by the NSW Government, a NSW Government agency or a Transport Agency (as defined in the Asset Standards Authority Charter). It is not suitable for any other purpose. You must not use or adapt it or rely upon it in any way unless you are authorised in writing to do so by a relevant NSW Government agency. If this document forms part of a contract with, or is a condition of approval by a NSW Government agency, use of the document is subject to the terms of the contract or approval. This document may not be current. Current standards are available for download from the Asset Standards Authority website at Superseded by T HR SC 02000 ST v3.0 www.asa.transport.nsw.gov.au. © State of NSW through Transport for NSW T HR SC 02000 ST Mandatory Requirements for Signalling Safeworking Procedures Version 2.0 Issued date: 26 May 2015 Standard governance Owner: Lead Signals and Control Systems Engineer, Asset Standards Authority Authoriser: Chief Engineer Rail, Asset Standards Authority Approver: Director, Asset Standards Authority on behalf of the ASA Configuration Control Board Document history Version Summary of Changes 1.0 First issue. 2.0 Minor technical changes to the following topics: • treatment of trainstop failures in
    [Show full text]
  • Travelling Virtual Balise for Etcs
    A. Filip, Int. J. Transp. Dev. Integr., Vol. 1, No. 3 (2017) 578–588 TRAVELLING VIRTUAL BALISE FOR ETCS A. FILIP Faculty of Electrical Engineering and Informatics, University of Pardubice, Czech Republic. ABSTRACT The railway industry has taken a great effort and is currently focused on exploitation of global naviga- tion satellite system (GNSS) for the European train control system (ETCS). It has been assessed that replacement of track balises, used for safe train location determination, with virtual balises (VBs) de- tected by means of GNSS will significantly reduce the track-side infrastructure and operational costs. However, this innovated ETCS can be put into operations only in the case when detection of VBs by means of GNSS will achieve the same safety integrity level (SIL 4) and availability as it is required for physical balise groups (BGs). This paper describes a novel travelling virtual balise (TVB) concept, which was proposed to meet the demanding ETCS safety requirements for GNSS using the existing European Geostationary Navigation Overlay Service (EGNOS) safety-of-life (SoL) service. The TVB concept profits from the basic feature of GNSS – i.e. the ability of abundant train position determination in GNSS service volume, which can- not be realized by current track balise groups (BGs) with a spacing of hundreds of metres or more. The frequent GNSS train positions are utilized for (1) fast diagnostics of on-board location determination system (LDS), (2) introduction of reactive fail-safety into LDS and (3) derivation and justification of the ETCS safety requirements for EGNOS. The TVB concept brings one significant advantage to ETCS in contrast to the static VBs – i.e.
    [Show full text]
  • View / Open TM Database Composite.Pdf
    • • • • TRANSPORTATION-MARKINGS • DATABASE • COMPOSITE CATEGORIES • CLASSIFICATION & INDEX • • • -­ • III III • 1 TRANSPORTATION-MARKINGS: A STUDY IN CO.MMUNICATION MONOGRAPH SERIES Alternate Series Title: An Inter-modal Study of Safety Aids Transportatiol1-Markings Database Alternate T-M Titles: Transport [ation] Mark [ing]s / Transport Marks / Waymarks T-MFoundations, 4th edition, 2005 (Part A, Volume I, First Studies in T-M) (3rd edition, 1999; 2nd edition, 1991) Composite Categories A First Study in T-M: The US, 2nd edition, 1993 (Part B, Vol I) Classification & Index International Marine Aids to Navigation, 2nd edition, 1988 (parts C & D, Vol I) [Unified First Edition ofParts A-D, University Press ofAmerica, 1981] International Traffic Control Devices, 2nd edition, 2004 (Part E, Volume II, Further Studies in T-M) (lst edition, 1984) Part Iv Volume III, Additional Studies, International Railway Signals, 1991 (Part F, Vol II) International Aero Navigation Aids, 1994 (Part G, Vol II) Transportation-Markil1gs: A Study il1 T-M General Classification with Index, 2nd edition, 2004 (Part H, Vol II) (1st edition, 1994) Commllnication Monograph Series Transportation-Markings Database: Marine Aids to Navigation, 1st edition, 1997 (I'art Ii, Volume III, Additional Studies in T-M) TCDs, 1st edition, 1998 (Part Iii, Vol III) Railway Signals. 1st edition, 2000 (part Iiii, Vol III) Aero Nav Aids, 1st edition, 2001 (Part Iiv, Vol III) Composite Categories Classification & Index, 1st edition, 2006 (part Iv, Vol III) (2nd edition ofDatabase, Parts Ii-v,
    [Show full text]