Compact Performance

CX C-SERIES HYDRAULIC EXCAVATORS CX145C SR I CX235C SR

COMPACT PERFORMANCE

www.casece.com EXPERTS FOR THE REAL WORLD SINCE 1842 CX C-SERIES HYDRAULIC EXCAVATORS

FULL SPECIFICATION EXCAVATORS Building on the proven success of the C-Series crawler excavator range, Case has developed the Short Radius CX145C SR and CX235C SR, taking performance and productivity to a new level. Featuring the Case Intelligent Hydraulic System, the CX145C SR and CX235C SR deliver maximum economy and productivity from a compact yet powerful design, reducing operating costs of customers and boosting productivity. OPERATOR CONTROL The new ROPS cab provides automotive levels of reduced noise and improved operator comfort. Visibility, space and seating have been improved and a new full-colour monitor delivers essential information and a camera feed for maximum safety and efﬁ ciency. SHORT SWING RADIUS The short swing radius allows excellent operation even in conﬁ ned spaces. The new CX145C SR and CX235C SR are the perfect machines for road construction, bridges projects and in urban construction sites, any jobsite where space is limited. The new CASE SR machines are designed to increase productivity, giving the operator easier operation with performance, without the risk of machine damage, in other words superior safety on the job site.

2 ENERGY EFFICIENCY The Case Intelligent Hydraulic System (CIHS) incorporates a host of energy saving, performance enhancing functions, to boost efﬁ ciency and machine output. In combination with powerful, fuel-efﬁ cient Tier 4 Interim diesel engines, this leads to fuel savings of up to 17% for the CX235C SR and up to 9% for the CX145C SR. A simple operating mode dial delivers three working modes with speed priority set to provide maximum horsepower and hydraulic output. A Powerboost function provides an 8 second boost for maximum digging performance.

Boom Economy Control increases energy efﬁ ciency during swing and boom lower operations, while Swing Relief Control further optimises energy use when slewing. Automatic Economy Control cuts energy use when the operating levers are in the neutral position and Spool Stroke Control delivers improved controllability in digging and levelling tasks.

The machines feature automatic engine idling and automatic engine shut down, to further cut unnecessary fuel use when not working. Pump Torque Variable Control provides perfect control of the engine and hydraulic system, further boosting economy. Despite this focus on reduced consumption, the SR excavators boast a 5% improvement in cycle times with a 6% improvement in lifting performance, from the previous models. ROBUST QUALITY The short radius machines continue a Case tradition of robust design and high quality build. By bringing together the highest quality components and materials, in a machine that has been designed to work productively, Case has further improved reliability and durability, reducing ownership costs and cutting downtime for the customer.

3 CX C-SERIES HYDRAULIC EXCAVATORS

SIMPLIFIED MAINTENANCE All fi lters are grouped together for easy access, reducing service time. In addition remote greasing points and standard EMS bushings cut greasing intervals to every 1,000 hours. A synthetic fi lter extends hydraulic oil service intervals to 5,000 hours while engine oil change intervals are set at a competitive 500 working hours. Side-by-side coolers and radiators are easily accessed for cleaning and maintenance, with a removable mesh fi lter cutting downtime and boosting productivity for the customer. A redesigned upper structure provides access to all service points from ground level, with large side opening access doors. Larger tank keeps downtime to a minimum, ensuring maximum productivity for up to two working days.

4 * Image may include optional rather then standards ﬁ ttings - Consult your Case dealer

5 CX C-SERIES HYDRAULIC EXCAVATORS

OPERATOR COMFORT AND SAFETY Case SR excavators take operator comfort to the next level, with a new 7% larger ROPS and FOPS Level 2 cab that delivers an almost automotive noise level. An improved air conditioning system (28% more airﬂ ow and 20% increase in performance), multi-adjustable suspension seating, increased foot space, cup holder and storage compartments deliver the most productive working environment possible.

Visibility is improved and the Case machines feature a new full-colour Multifunction Display. This extra large LED screen provides important machine information in a clear, easy to use menus format. Rear and side view cameras can be viewed using a split-screen facility, while vital machine data remains clearly visible.

An ECO gauge provides a constant real- time recording of fuel consumption, allowing the operator to reduce power and conserve fuel when possible, improving efﬁ ciency and productivity. The monitor also provides access to on-board diagnostics, reducing downtime for service and maintenance.

6 7 THE CASE DEALER: YOUR PROFESSIONAL PARTNER Your success starts with world-class Case machinery and attachments. Your Case dealer will help you work smarter and faster by selecting equipment that delivers performance and operator comfort. Your dealer has the knowledge and experience necessary to help you choose the right attachments so you can…

• Work faster and extend equipment life. • Increase machine utilization. • Increase your capabilities.

Let your Case dealer service your machine on the jobsite. You’ll be back on the job faster. Advantages include…

• Responsive job site service to keep your equipment running. • Increase machine uptime. • Certiﬁ ed service staff and improved parts availability.

8 PARTS When you’re looking for superior parts options to maximize the performance and lower the operating costs of your Case machinery, turn to CNH Industrial Genuine Parts to keep you equipped for success. CNH Industrial Genuine Parts fi t better, install faster and last longer and in an industry where “high impact” and “heavy lifting” are the norm, the smallest mechanical differences can lead to big problems. CNH Industrial Genuine Parts from Case are manufactured from superior materials and specifi cally designed for Case construction equipment to continually and reliably withstand the punishment of everyday construction. So steer clear of mechanical problems and future breakdowns, by choosing CNH Industrial Genuine Parts from Case. They’re the only parts that are fi eld-tested and proven to keep your Case equipment performing its best. SERVICE. RELY ON CASE TO DELIVER FOR YOU Your commitment to your operation is evident every day, but that doesn’t minimize the enormous pressure you face to reduce operating costs and improve productivity. So when you’re on the job, make sure you have top-notch service and support of Case behind you every step of the way. With our factory trained technicians, you can ensure that top-notch service professionals are working on your maintenance needs, so you can focus on your business and the big job challenges ahead, not on the tasks of servicing your equipment.

With your Case Service, you get more than mere oil changes. A Case Service ensures your Case equipment receives a thorough service that meets all requirements of its service schedules and properly maintains it for the day-in, day- out punishment of construction work. Don’t give another thought to time-consuming maintenance tasks. Simply rest easy and make certain that your service needs are taken care of by a Case factory trained technician.

9 When the unexpected occurs, you need to know your equipment is protected. At Case Construction we understand the importance of your machinery being in good working order when it counts.

ProCover is designed to help keep your equipment working well beyond the manufacturer’s base warranty period while taking away the concerns of the cost and inconvenience of mechanical failure. WHAT ARE THE ADVANTAGES OF PROCOVER?

PEACE OF MIND Provides protection beyond the Manufacturer’s Base Warranty Period.

FLEXIBLE OPTIONS Plans can be customised to meet individual needs.

DEPENDABLE SERVICE Eligible repairs completed by an authorised Case Construction Dealership and their trained service technician’s using genuine OEM parts & lubricants.

TRANSFERABLE PROTECTION New Equipment Plans may be transferred to a new owner at no charge COVERAGE • STANDARD PROTECTION PLAN 3 Years / 5000 Hours Additional years/hours can be purchased. Please contact your local Case Construction dealer for further information.

10 STANDARD PROCOVER PLUS PROTECTION PLAN CONSTRUCTION EQUIPMENT MASTER PARTS SCHEDULE

This plan provides coverage for the components listed below when a failure occurs due to a defect in material or workmanship, and may provide coverage for additional components not listed when the damage is caused by or resulting from a covered failure of a listed component. PREMIER COMPONENTS COVERED ENGINE AND ALL INTERNAL TRANSMISSIONS/AXLES/HYDROSTATICS ELECTRICAL HYDRAULICS LUBRICATED COMPONENTS WITHIN Accessory Gears Axle Housing Alternator Accumulator And Related Relief Valve Air Intake Hose Axle Shaft Gauges Brake Accumulator Camshaft Clutch Discs (Wet Only) Horn Brake Pressure Sensor Camshaft Bearings Clutch Plates (Wet Only) Indicators Brake Pump, Brake Valve Camshaft Drive Gear Control Rods Instruments Differential Lock Valve Catalytic Converter Counter Shaft Clutch Electronic Joysticks Fan Pumps And Motors Charge Air Cooler Differential Housing Electric Motors Hydraulic Cylinders Cold Start Enrichment Systems Differential Pinion Gear / Ring Gear Factory Installed Telematics Hydraulic Hoses and Piping Connecting Rods & Bearings Drive Axle Hub Sensors Hydraulic Motors Crankshaft Bearings & Gear Drive Shaft Support Bearing Solenoid Valves Hydraulic Oil Coolers Crankshaft Including Front And Rear Crankshaft Seals Drive Shaft with Universal Joints Starter And Starter Solenoid Hydraulic Pumps Cylinder Heads/ Head Gaskets Electronic Transmission Controller and Valve Switches Hydraulic Reservoir Cylinder Liners Enclosed Oil Immersed Chains and Sprockets Traction Control System Hydraulic Valves Diesel Exhaust Fluid Tank and Dispensing System External Oil Lines Voltage Regulator Internal O-Rings and Bonded Washers Diesel Particulate Filter Filler Tubes (Transmission) Wiring Harnesses Pilot Control EGR System Manifold Final Drive Pinion Wiring Harnesses Exclusions Pressure Reducing Valves Electronic Engine Control Module Final Drive Planetary Gears Rubbing, Chaﬁ ng, Loose Or Corroded Connections Unloading Valves FACTORY INSTALLED HEATAND Engine Block Front Wheel Drive Sensors STRUCTURAL AIR CONDITIONING Engine Mounts And Supports Hydraulic Drive / Travel Motor Accumulator Backhoe Booms Engine Oil Cooler Hydraulic Drive Pump Clutch Backhoe/Excavator Dipper Sticks Engine Speed Controls, Linkages, and Cables Hydraulic Transmission-Control Valve Compressor C Frame Exhaust Manifold and Mufﬂ er Hydrostatic Motor Condenser Car Body Fan And Fan Drive Hydrostatic Transmission Charge Pump Dryer Chassis Filter Mount Hydrostatic Transmission Pump Evaporator Circle Frame Flywheel, Ring Gear Hydrostatic/Hydraulic Pump Drives Expansion Valve Engine Frame Front And Rear Engine Covers And Seals Internal Lubricated Clutch Housings Heater Core Equipment Frame Front Damper Internal Transmission Control Linkage Hoses Excavator Booms Fuel Lines Internal Wet Service Brakes Pulley Falling Object Protection Structure (FOPS) MFWD Axle/Differential Assembly including Fuel Tank Seals & Gaskets Forklift Masts Driveshaft and U Joint Inner and Outer Dipper Arms of the Extendable Boom Fuel Transfer Pump & Gasket Planetary Gear Carrier Temperature Control Programmers and Valves (Backhoe Loader) Injection Pump Pneumatic Valves OPERATOR AREA Main Frame Injectors Rotary Hydraulic Manifold Covers and Panels Rollover Protection Structure (ROPS) Intake and Exhaust Manifold And Gaskets Splitter Drive/Drop Box Exterior/Interior Door/Panel Latches, Hinges & Struts Swing Frame Oil Filler Tube Steering Clutches (Wet) Exterior/Interior Moldings Swing Tower Castings (Backhoe Loader) Oil Lines Swing Motor And Swing Gear Box Knobs for Switches and Handles Track Frame Oil Pan And Gasket Torque Converter Mirrors Wheel Loader/Skid steer Loader Arms Oil Pump Torque Converter Pump Seat Frame & Suspension Pistons & Rings Transfer Drive Pre-Cleaner/Air Cleaner Housing Transmission Case Pressure/Temperature Sensors & Sending Units Transmission Gears, Bearings, & Shafts Pulleys Transmission Pump Radiator Travel & Swing Sections (only) Of Main Control Valve Rocker Arm Assembly Travel Control Valve Selective Catalytic Reduction System Turntable Bearing Thermostats Undercarriage Roller And Idler Seals And Bearings Timing Gears Undercarriage Tensioners

Turbocharger And Gasket UNDERCARRIAGE EXCLUSIONS: Valve Cover And Gasket Sprocket, Tracks, Pads, Bolts, Chains, Or Any Failure Due To Wear, Or Breakage Caused By Wear Water Piping Water Pumps

114 CX C-SERIES HYDRAULIC EXCAVATORS

ENGINE TRAVEL Model ______Tier 4 interim certiﬁ ed ISUZU AM-4JJ1X Travel motor ______Fixed displacement axial piston motor Type ______Water-cooled, 4-cycle diesel, 4-cylinder in line, Max travel speed ______5.6 km/h (Automatic travel speed shifting) High pressure common rail system (electric control),Turbocharger with air Low travel speed ______3.4 km/h cooled intercooler, DPD system Gradeability ______70% (35°) Number of cylinders ______4 Drawbar pull ______116 kN Bore/Stroke ______95.4 x 104.9 mm Horsepower ISO 9249 ______74.9 kW at 2000 min-1 Maximum torque ISO 9249 ______359 Nm at 1600 min-1 ELECTRICAL SYSTEM Circuit ______24 V HYDRAULIC SYSTEM Alternator ______50 Amp Max oil ﬂ ow ______2 x 129 l/min @ 2000 min-1 2 variable displacement axial piston pumps with regulating system UNDERCARRIAGE Working circuit pressure Number of carriers rollers (each side) ______1 Boom/Arm/Bucket ______34.3 MPa Number of track rollers (each side) ______7 Boom/Arm/Bucket (with auto power up) ______36.3 MPa Number of shoes (each side) ______43 Swing circuit ______28.0 MPa Type of shoe ______Triple grouser shoe Travel circuit ______34.3 Mpa SWING CAPACITIES Fuel tank ______320 ltr Maximum swing speed ______10.6 min-1 Hydraulic system ______252ltr Cooling system ______15.3 ltr

WEIGHT With 2.50 m Arm, 0.5 m3 bucket, operator, lubricant, coolant and full fuel tank and top guard OPG level 2

CX145C SR BLADE WEIGHT (kg) 500 mm grouser shoe 14,200

With 2.10 m Arm , 0.45 m3 bucket, operator, lubricant, coolant and full fuel tank and top guard OPG level 2

CX145C SR BLADE OFFSET BOOM WEIGHT (kg) 500 mm grouser shoe 14,900

12 SPECIFICATIONS CX145C SR

GENERAL DIMENSIONS

A D

B C

E K

G I H J

CX145C SR BLADE ARM 2.50 m Overall length (without attachment) 4160 mm A Overall length (with attachment) 7880 mm B Overall height (with attachment) 2900 mm C Cab height 2900 mm D Upper structure overall width 2490 mm Swing (rear end) radius) 1490 mm E Clearance height under upper structure 880 mm F Minimum ground clearance 440 mm G Wheel base (Center to center of wheels) 2790 mm H Crawler overall length 3500 mm ITrack gauge 1990 mm J Undercarriage overall width (with 600 mm shoes) 2490 mm K Crawler tracks height 790 mm

BLADE DIMENSIONS AND RANGE

CX145C SR BLADE / OFFSET BOOM Blade dimensions (width x height) 2,490 x 570 mm Blade range (up/down) 510 x 520 mm

13 CX C-SERIES HYDRAULIC EXCAVATORS

PERFORMANCE DATA

10 m

5 D 4 E 3

0 10 m987654 210

-1

-2 C -3

-4

-5

-6

-7 A

CX145C SR BLADE ARM 2.50 m Boom length 4630 mm Bucket radius 1200 mm Bucket wrist action 178° A Maximum reach at GRP 8170 mm BMaximum reach 8310 mm C Max. digging depth 5540 mm D Max. digging height 8770 mm E Max. dumping height 6390 mm

DIGGING FORCE With 0.5 m3 bucket (ISO 6015)

CX145C SR BLADE ARM 2.50 m Arm digging force 62 kN - with auto power up 66 kN Bucket digging force 90 kN - with auto power up 95 kN

14 LIFTING CAPACITY CX145C SR

REACH Front 0 m 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m At max reach

360° m

CX145C SR. BLADE DOWN. Standard arm. 2.50 m arm length, 0.50 m3 bucket, 500G shoes, max reach 8.29 m 7.5 m 2360 * 2360 * 1290 * 1290 * 5.24 6.0 m 2950 * 2950 * 2320 * 2320 * 1090 * 1090 * 6.70 4.5 m 3680 * 3680 * 2930 * 2320 1090 * 1090 * 1030 * 1030 * 7.52 3.0 m 7190 * 6990 5210 * 3580 3860 * 2200 2300 * 1460 1030 * 1030 * 7.92 1.5 m 9690 * 6280 6250 * 3300 4660 * 2070 2760 * 1400 1100 * 1100 * 8.00 0 m 2760 * 2760 * 8330 * 5780 6640 * 3070 4790 * 1960 2470 * 1350 1230 * 1230 * 7.77 -1.5 m 5160 * 5160 * 9610 * 5730 6420 * 2970 * 4560 * 1910 1490 * 1430 7.22 -3.0 m 8080 * 8080 * 7820 * 5850 5360 * 3030 3430 * 1980 2040 * 1820 6.26 -4.5 m 4370 * 4370 * 2560 * 2560 2110 * 2110 * 4.69

CX145C SR. BLADE UP. Standard arm. 2.50 m arm length, 0.50 m3 bucket, 500G shoes, max reach 8.29 m 7.5 m 2360 * 2360 * 1290 * 1290 * 5.24 6.0 m 2950 * 2950 * 2320 * 2320 * 1090 * 1090 * 6.70 4.5 m 3680 * 3680 * 2930 * 2320 1090 * 1090 * 1030 * 1030 * 7.52 3.0 m 7190 * 6990 5210 * 3580 3860 * 2200 2300 * 1460 1030 * 1030 * 7.92 1.5 m 9690 * 6280 6250 * 3300 * 4660 * 2070 2760 * 1400 1100 * 1100 * 8.00 0 m 2760 * 2760 * 8330 * 5780 6640 * 3070 4790 * 1960 2470 * 1350 1230 * 1230 * 7.77 -1.5 m 5160 * 5160 * 9610 * 5730 6420 * 2970 4560 * 1910 1490 * 1430 7.22 -3.0 m 8080 * 8080 7820 * 5850 5360 * 3030 3430 * 1980 2040 * 1820 6.26 -4.5 m 4370 * 4370 * 2560 * 2560 * 2110 * 2110 * 4.69

* Lift capacities are taken in accordance with SAE J1097 / ISO 10567 / DIN 15019-2 Lift capacities shown in kg do not exceed 75% of the tipping load or 87% of the hydraulic lift capacity Capacities that are marked with an asterisk (*) are hydraulic limited If the machine is equipped with a quick coupler, subtract the weight of the quick coupler from the load shown in the table to calculate the real lift capacity

15 CX C-SERIES HYDRAULIC EXCAVATORS

ENGINE TRAVEL Model ______Tier 4 interim certiﬁ ed ISUZU AM-4HK1X Travel motor ______Variable displacement axial piston motor Type ______Water-cooled, 4-cycle diesel, 4-cylinder in line, Max travel speed ______5.0 km/h (Automatic travel speed shifting) High pressure common rail system (electric control), Turbocharger with air Low travel speed ______3.2 km/h cooled intercooler, DPD system Gradeability ______70% (35°) Number of cylinders ______4 Drawbar pull ______201 kN Bore/Stroke ______115 x 125 mm Horsepower ISO 9249 ______119.3 kW at 1800 min-1 Maximum torque ISO 9249 ______621 Nm at 1500 min-1 ELECTRICAL SYSTEM Circuit ______24 V HYDRAULIC SYSTEM Alternator ______50 Amp Max oil ﬂ ow ______2 x 211 l/min @ 1800 min-1 2 variable displacement axial piston pumps with regulating system UNDERCARRIAGE Working circuit pressure Number of carriers rollers (each side) ______2 Boom/Arm/Bucket ______34.3 MPa Number of track rollers (each side) ______8 Boom/Arm/Bucket (with auto power up) ______36.4 MPa Number of shoes (each side) ______49 Swing circuit ______29.4 MPa Type of shoe ______Triple grouser shoe Travel circuit ______34.3 Mpa SWING CAPACITIES Fuel tank ______320 ltr Maximum swing speed ______11.8 min-1 Hydraulic system ______252 ltr Cooling system ______30.9 ltr

WEIGHT With 2.94 m Arm, 0.8 m3 bucket, operator, lubricant, coolant, full fuel tank

CX235C SR BLADE WEIGHT (kg) 600 mm grouser shoe 25,200

16 SPECIFICATIONS CX235C SR

GENERAL DIMENSIONS

A D

B C

E K

G I J H

CX235C SR BLADE ARM 2.94 m Overall length (without attachment) 4700 mm A Overall length (with attachment) 9210 mm B Overall height (with attachment) 3090 mm C Cab height 3000 mm D Upper structure overall width 2990 mm Swing (rear end) radius 1720 mm E Clearance height under upper structure 1020 mm F Minimum ground clearance 440 mm G Wheel base (Center to center of wheels) 3370 mm H Crawler overall length 4180 mm ITrack gauge 2200 mm J Undercarriage overall width (with 500 mm shoes) 2800 mm K Crawler tracks height 920 mm

17 CX C-SERIES HYDRAULIC EXCAVATORS

PERFORMANCE DATA

12 m

6 D 5

E 4

0 11 m 10 9 87654 210 -1

-2

C -3

-4

-5

-6

-7 A

CX235C SR BLADE ARM 2.94 m Boom length 5700 mm Bucket radius 1450 mm Bucket wrist action 177° A Maximum reach at GRP 9670 mm BMaximum reach 9850 mm C Max. digging depth 6650 mm D Max. digging height 10860 mm E Max. dumping height 7970 mm

DIGGING FORCE With 0.8 m3 bucket (ISO 6015)

CX235C SR BLADE ARM 2.94 m Arm digging force 103 kN - with auto power up 110 kN Bucket digging force 142 kN - with auto power up 152 kN

18 SPECIFICATIONS CX235C SR

REACH Front 1.5 m 3.0 m 4.5 m 6.0 m 7.5 m 9.0 m At max reach

360° m

CX235C BLADE. Version Standard arm. 2.94 m arm length, 0.80 m3 bucket, 600G shoes, max reach 9.85 m - Blade down 9.0 m 3090 * 3090 * 2470 * 2470 * 6.26 7.5 m 3950 * 3950 * 2960 * 2960 * 2180 * 2180 * 7.76 6.0 m 4330 * 4330 * 3980 * 3430 2080 * 2080 * 8.69 4.5 m 5010 * 5010 * 5760 * 5760 * 4980 * 4840 * 4520 * 3320 3040 * 2330 2080 * 2080 * 9.24 3.0 m 10520 * 10520 * 7780 * 7240 5980 * 4620 4990 * 3170 4020 * 2260 2150 * 2020 9.49 1.5 m 9670 * 9670 * 9420 * 6720 6840 * 4330 5490 * 3010 4430 * 2180 2290 * 1980 9.48 0 m 8630 * 8630 * 10260 * 6290 7390 * 4090 5780 * 2880 3820 * 2130 2530 * 2040 9.22 -1.5 m 6980 * 6980 * 10790 * 10790 * 10310 * 6150 7490 * 3960 5780 * 2820 2960 * 2240 8.69 -3.0 m 9650 * 9650 * 14520 * 12360 9890 * 6220 7240 * 4010 5410 * 2900 3860 * 2640 7.85 -4.5 m 14000 * 14000 * 12320 * 12260 * 8590 * 6450 6140 * 4250 * 4950 * 3470 6.70 CX235C BLADE. Version Standard arm. 2.94 m arm length, 0.90 m3 bucket, 600G shoes, max reach 9.85 m - Blade up 9.0 m 3090 * 3090 * 2470 * 2470 * 6.26 7.5 m 3950 * 3950 * 2960 * 2960 * 2180 * 2180 * 7.76 6.0 m 4330 * 4330 * 3980 * 3270 2080 * 2080 * 8.69 4.5 m 5010 * 5010 * 5760 * 5760 * 4980 * 4660 4520 * 3160 3040 * 2210 2080 * 2080 * 9.24 3.0 m 10520 * 10520 * 7780 * 6970 5980 * 4410 4670 3010 3400 2140 2150 * 1910 9.49 1.5 m 9670 * 9670 * 9420 * 6380 6470 4110 4510 2860 3320 2060 2290 * 1870 9.48 0 m 8630 * 8630 * 9910 5950 6210 3870 4370 2730 3260 2010 2530 * 1930 9.22 -1.5 m 6980 6980 10790 * 10790 * 9730 5810 6070 3750 4290 2660 2960 * 2120 8.69 -3.0 m 9650 * 9650* 14520 * 11600 9740 5890 6110 3800 4380 2750 3860 2500 7.85 -4.5 m 14280 * 14280 * 12320 * 11700 8590 * 6120 6210 4050 4950 * 3290 6.70

19 www.casece.com EXPERTS FOR THE REAL WORLD SINCE 1842

CASE CONSTRUCTION EQUIPMENT Customerustomesto CONTACT INFORMATION Assistancce AUSTRALIA 1300 99 CASE 31-53 Kurrajong Road St. Marys nsw 2760

NOTE: CASE provides specifi c outfi ts for various countries and many optional fi ttings (OPT). The illustrations on this or other leafl ets may relate to standard or optional fi ttings. Please consult your CASE dealer for any information in this regard and any possible updating on components. CNH Industrial reserves the right to modify machine specifi cations without incurring any obligation relating to such changes.

Form No. ANZ3310CCGB - Printed in Australia - MediaCross Firenze - 06/15