DOCSLIB.ORG

Perovskites: Crystal Structure, Important Compounds and Properties

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Perovskites: Crystal Structure, Important Compounds and Properties Perovskites: crystal structure, important compounds and properties Peng Gao GMF Group Meeting 12,04,2016 Solar energy resource PV instillations Global Power Demand Terrestrial sun light To start • We have to solve the energy problem. • Any technology that has good potential to cut carbon emissions by > 10 % needs to be explored aggressively. • Researchers should not be deterred by the struggles some companies are having. • Someone needs to invest in scaling up promising solar cell technologies. Origin And History of Perovskite compounds Perovskite is calcium titanium oxide or calcium titanate, with the chemical formula CaTiO3. The mineral was discovered by Gustav Rose in 1839 and is named after Russian mineralogist Count Lev Alekseevich Perovski (1792–1856).” All materials with the same crystal structure as CaTiO3, namely ABX3, are termed perovskites: Origin And History of Perovskite compounds Very stable structure, large number of compounds, variety of properties, many practical applications. Key role of the BO6 octahedra in ferromagnetism and ferroelectricity. Extensive formation of solid solutions material optimization by composition control and phase transition engineering. A2+ B4+ O2- Ideal cubic perovskite structure (ABO3) Classification of Perovskite System Perovskite Systems Inorganic Halide Oxide Perovskites Perovskites Alkali-halide Organo-Metal Intrinsic Doped Perovskites Halide Perovskites Perovskites A2Cl(LaNb2)O7 Perovskites 1892: 1st paper on lead halide perovskites Structure deduced 1959: Kongelige Danske Videnskabernes Selskab, Matematisk-Fysike Meddelelser (1959) 32, p1-p17 Author: Moller, C.K. Title: The structure of cesium plumbo iodide CsPbI3 Useful salts with perovskite structure Reference Properties Existing and potential Notes compound applications Ferroelectricity, piezoelectricity, high dielectric constant Multilayer ceramic capacitors (MLCCs), Most widely used dielectric ceramic BaTiO3 PTCR resistors, embedded capacitance TC = 125°C Non-linear dielectric properties Tunable microwave devices Used in the paraelectric state (Ba,Sr)TiO3 Ferroelectricity, piezoelectricity Piezoelectric transducers and actuators, PZT: most successful piezoelectric Pb(Zr,Ti)O3 ferroelectric memories (FERAMs) material Ferroelectric with high Curie temperature High-temperature actuators, FeRAMs Aurivillius compound Bi4Ti3O12 TC = 675°C Ferroelectricity, piezoelectricity Lead-free piezoceramics Performances not yet comparable to (K0.5Na0.5)NbO3, PZT but rapid progress Na0.5Bi0.5TiO3 Transparent ferroelectric Optoelectronic devices First transparent ferroelectric ceramic (Pb,La)(Ti,Zr)O3 Magnetoelectric coupling, high Curie temperature Magnetic field detectors, Most investigated multiferroic BiFeO3 memories compound. TC = 850°C Relaxor ferroelectric Capacitors, actuators High permittivity, large electrostrictive PbMg1/3Nb2/3O3 coefficients, frequency-dependent properties Ferromagnetism Electrode material for epitaxial ferroelectric SrRuO3 thin films Ferromagnetism, giant magnetoresistance, spin- Magnetic field sensors, spin electronic (La, A)MnO3 A = Ca, Sr, Ba polarized electrons devices Incipient ferroelectricity, thermoelectric power, metallic Alternative gate dielectric material, barrier Multifunctional material SrTiO3 electronic conduction when n-doped, mixed layer capacitors, substrate for epitaxial conduction when p-doped, photocatalyst growth, photoassisted water splitting Oxyde-ion conduction Electrolyte in solid oxide fuel cells (SOFCs) BaIn O is an oxygen deficient LaGaO3 2 5 perovskite with brownmillerite structure. BaIn2O5 Proton conduction Electrolyte in protonic solid oxide fuel cells (P- High protonic conduction at 500- BaCeO3, BaZrO3 SOFCs) 700°C Mixed conduction, catalyst Cathode material in SOFCs, oxygen Used for SOFC cathodes (La,Sr)BO3 (B = Mn, Fe, Co) separation membranes, membrane reactors, controlled oxidation of hydrocarbons, Host materials for rare-earth luminescent ions, Lasers LaAlO3 Substrates for epitaxial film deposition YAlO3 Early publications on lead halide perovskites 1st Solar Cell Reports Solid-State DSC DSSC using redox electrolyte DSSC using hole transport material Redox electrolyte Solid hole conductor PCE PCE light harvester dye dye or pigment film TiO2 TiO2 Evolution of device structures Various device fabrication methods ‘Anti-solvent’ the key to optimum morphology a) N. J. Jeon, J. H. Noh, Y. C. Kim, W. S. Yang, S. Ryu, S. I. Seok, Nat Mater 2014, 13, 897-903. b) M. Xiao, F. Huang, W. Huang, Y. Dkhissi, Y. Zhu, J. Etheridge, A. Gray-Weale, U. Bach, Y.-B. Cheng, L. Spiccia, Angew. Chemie Int. Ed. 2014, 53, 9898–9903. Perovskite vs silicon technology Production of silicon and silicon wafers Expensive, high-energy process, generating high levels of waste material Production of perovskite cell Simpler, lower cost, lower embodied energy, massively reduced environmental impact Toxicity Medium Medium Low High Abundance Low Low High High Low Bandgap – q·Voc Loss in Perovskite Solar Cells Material Bandgap (eV) q·Voc (eV) Energy loss (eV) GaAs 1.43 1.12 0.31 Silicon 1.12 0.75 0.37 CIGS ~1.15 0.74 0.41 Perovskite 1.55 1.07 0.48 (CH3NH3PbI3) CdTe 1.49 0.90 0.59 a-Silicon 1.55 0.89 0.66 M. Green et al. Solar cell efficiency tables (version 42) July 2013 The hybride Perovskite is a Strongly-Absorbing Direct Band Gap Semiconductor The Perovskite Bandgap can be tuned by Chemical Substitution The band gap can be tuned from 1.57 eV to 2.23 eV by substituting bromine for iodine in CH3NH3Pb(BrxI1-x)3 For hybrid But the morphology is not stable! tandem with CIGS eV Noh et al., Nano Lett. 2013 Lead-free: CH3NH3SnI3 Perovskite Tuning the structure of perovskites from 3D to 2D • When will a 3D perovskite form? • When the A, B and X components fit together neatly in the crystal lattice. • Assuming ionic radii of RA etc, For a close packed cubic perovskite the structure is possible, provided: Low dimensional perovskite with more possibilities The basic structures of 2D organic–inorganic perovskite with bilayer and single layer intercalated organic molecules Schematic representations of hydrogen-bond styles between + NH3 heads with an inorganic framework <110> oriented 2D organic-inorganic hybrid perovskite <110>-oriented (C6H13N3)PbBr4 (API-PbBr4) that is prepared by reacting N-(3-amino- propyl)imidazole (API) with PbBr2 in hydrobromic acid. 5,5’-bis(2-aminoethyl)-2,2’:5’,2’:5’,2’-quaterthiophene (AEQT) based 2D organic-inorganic hybrid perovskite Cl Br l Room temperature photoluminescence excitation (λem = 540 nm) and emission (λex = 370 nm) spectra for thermally ablated thin films of (AEQT)PbX4 with (a) X = Cl and (b) X 10.1021/ic991048k = I. Polymerization within the organic layer of perovskite structures 6-amino-2,4-trans,trans-hexadienoic acid, within a cadmium (II) chloride perovskite framework, polymerizes under ultraviolet (UV) irradiation. More rigid and stable perovskite structure! B. Tieke and G. Chapuis, Mol. Cryst. Liq. Cryst., 1986, 137, 101 Ni(bipy)3 as cations for 2D perovskite as hybrid magnetic semiconductor 10.1016/j.jssc.2007.10.010 Take home message • Being toxic and instable, Lead-Halide perovskite is an excellent ‘MODLE’ material for electronic application. • 3D type , Lead-Halide perovskite has found prevailing application in PV field. • 3D type , Lead-Halide perovskite can be strong competitor to silicon PV • 2D or 1D type perovskite provide more possibility for more broad applications. References 1. Band alignment of the hybrid halide perovskites CH3NH3PbCl3, CH3NH3PbBr3 and CH3NH3PbI3 2. Keith T. Butler, Jarvist M. Frost and Aron Walsh 3. Recent progress in efficient hybrid lead halide perovskite solar cells – Jin Cui, Hualiang Yuan, Hong Lin et;al. 4. Crystallography and Chemistry of Perovskites Mats Johnsson and Peter Lemmens (Dept. Inorg. Chemistry, Stockholm University) 5. Perovskite Solar cells: An emerging photovoltaic technology Nam-Gyu Park (SKKU) 6. Perovskite Solar Cells: Film Formation and properties- Tze Bin Song, Qi Chen, Huanping Zhou, et al. 7. www.solarpowerworldonline.com/2015/04/the-perfect-marriage-silicon-and-perovskite-solar-cells/ 8. Lead-free organic–inorganic tin halide perovskites for photovoltaic applications -Nakita K. Noel, Samuel D. Stranks, Antonio Abate, Christian Wehrenfennig, Simone Guarnera, Amir-Abbas Haghighirad, Aditya Sadhanala, Giles E. Eperon, Sandeep K. Pathak, Michael B. Johnston, Annamaria Petrozza, Laura M. Herza and Henry J. Snaith 9. A Layered Hybrid Perovskite Solar-Cell Absorber with Enhanced Moisture Stability-Ian C. Smith, Eric T. Hoke, Diego Solis-Ibarra, Michael D. McGehee, and Hemamala I. Karunadasa Thank you for your attention!.
Load more

Recommended publications
  • 2 Literature Review
    2 Literature review 2.1 Thin film solid state reactions A solid state chemical reaction in the classical sense occurs when local transport of matter is observed in crystalline phases and new phases are formed.1 This definition does not mean that gaseous or liquid phases may not take part in the solid state reactions. However, it does mean that the reaction product occurs as a solid phase. Thus, the tarnishing of metals during dry or wet oxidation is also considered to be a solid state reaction. Commonly, the solid state reac- tions are heterogeneous reactions. If after reaction of two substances one or more solid product phases are formed, then a heterogeneous solid state reaction is said to have occurred. Spinel- and pyrochlore-forming reactions are well-known examples of solid-state reactions where a ternary oxide forms.5–11 In this Ph.D. thesis, heterogeneous solid state reactions are considered. Extended crystal defects as high mobility paths for atoms are essential in the reactivity of solids. Furthermore, interfaces play an important role in the solid state reactions because during hetero- geneous reactions interfaces move and mass transport occurs across them. The interfaces can be coherent, semicoherent or incoherent.28 At the interface, chemical reactions take place between species and defects; they are often associated with structural transformations and volume changes. The characteristics of thin film solid state reactions running on the nanometer scale are con- siderably different from solid state reactions proceeding in the bulk. During bulk reactions, the diffusion process is rate limiting and controls the growth.
    [Show full text]
  • Structure Refinement of Polycrystalline Orthorhombic Yttrium Substituted Calcium Titanate: Ca1−Xyxtio3+Δ (X = 0·1–0·3)
    Bull. Mater. Sci., Vol. 34, No. 1, February 2011, pp. 89–95. c Indian Academy of Sciences. Structure refinement of polycrystalline orthorhombic yttrium substituted calcium titanate: Ca1−xYxTiO3+δ (x = 0·1–0·3) RASHMI CHOURASIA and O P SHRIVASTAVA∗ Department of Chemistry, Dr H.S. Gour University, Sagar 470 003, India MS received 23 May 2007; revised 7 September 2010 Abstract. The perovskite ceramic phases with composition Ca1−xYxTiO3+δ (where x = 0·1, 0·2and0·3; hereafter CYT-10, CYT-20 and CYT-30) have been synthesized by solid state reaction at 1050◦C. The structure refinement using general structure analysis system (GSAS) software converges to satisfactory profile indicators such as Rietveld 2 parameters: Rp, Rwp,RF and goodness of fit. The title phases crystallize at room temperature in the space group Pbnm (#62) with a = 5·3741(4) Å, b = 5·4300(4) Å, c = 7·6229(5) Å and Z = 4. Major interatomic distances, bond angles and structure factors have been calculated from the step analysis data of the compound. The crys- tal morphology has been examined by scanning electron microscopy. Energy dispersive X-ray (EDX) analysis of the specimens show that yttrium enters into the structural framework of CaTiO3. The particle size of the ceramic phases along major reflection planes ranges between 12 and 40 nm. The polyhedral (CaO8 and TiO6) distortions and valence calculations from bond strength data are also reported. Keywords. Perovskites; powder X-ray diffraction; Rietveld refinement; GSAS; nanoceramic. 1. Introduction 2. Experimental Perovskite type oxides of general formula ABO3 are well 2.1 Ceramic route synthesis of Ca1−x Yx TiO3 (x = 0·1–0·3) known for their property of cationic substitution on A site phases (Goodenough et al 1976; Myhra et al 1986; Ringwood 1985; Shrivastava and Shrivastava 2002).
    [Show full text]
  • Combustion Synthesis, Sintering, Characterization, and Properties
    Hindawi Advances in Materials Science and Engineering Volume 2019, Article ID 9639016, 9 pages https://doi.org/10.1155/2019/9639016 Research Article Calcium Titanate from Food Waste: Combustion Synthesis, Sintering, Characterization, and Properties Siriluk Cherdchom,1 Thitiwat Rattanaphan,1 and Tawat Chanadee 1,2 1Department of Materials Science and Technology, Faculty of Science, Prince of Songkla University (PSU), Hat Yai, Songkhla 90110, &ailand 2Ceramic and Composite Materials Engineering Research Group (CMERG), Center of Excellence in Materials Engineering (CEME), Prince of Songkla University (PSU), Hat Yai, Songkhla 90110, &ailand Correspondence should be addressed to Tawat Chanadee; [email protected] Received 31 August 2018; Revised 20 December 2018; Accepted 3 January 2019; Published 12 February 2019 Academic Editor: Andres Sotelo Copyright © 2019 Siriluk Cherdchom et al. )is is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Calcium titanate (CaTiO3) was combustion synthesized from a calcium source of waste duck eggshell, anatase titanium dioxide (A-TiO2), and magnesium (Mg). )e eggshell and A-TiO2 were milled for 30 min in either a high-energy planetary mill or a conventional ball mill. )ese powders were then separately mixed with Mg in a ball mill. After synthesis, the combustion products were leached and then sintered to produce CaTiO3 ceramic. Analytical characterization of the as-leached combustion products revealed that the product of the combustion synthesis of duck eggshell + A-TiO2 that had been high-energy-milled for 30 min before synthesis comprised a single perovskite phase of CaTiO3.
    [Show full text]
  • CRYSTAL SRUKTUR of CALCIUM TITANATE (Catio3) PHOSPHOR DOPED with PRASEODYMIUM and ALUMINIUM IONS
    CRYSTAL SRUKTUR OF CALCIUM TITANATE (CaTiO3) PHOSPHOR DOPED WITH PRASEODYMIUM AND ALUMINIUM IONS STRUKTUR KRISTAL FOSFOR KALSIUM TITANIA DIDOPKAN DENGAN ION PRASEODYMIUM DAN ALUMINIUM IONS Siti Aishah Ahmad Fuzi1* and Rosli Hussin2 1 Material Technology Group, Industrial Technology Division, Malaysian Nuclear Agency, Bangi, 43000 Kajang, Selangor Darul Ehsan, Malaysia. 2 Department of Physics, Faculty of Science, Universiti Teknologi Malaysia, 81310 Skudai, Johor 1*[email protected], [email protected] Abstract The past three decades have witnessed rapid growth in research and development of luminescence phenomenon because of their diversity in applications. In this paper, Calcium Titanate (CaTiO3) was studied to find a new host material with desirable structural properties for luminescence-based applications. Solid state reactions o 3+ methods were used to synthesis CaTiO3 at 1000 C for 6 hours. Crystal structure of CaTiO3 co-doped with Pr 3+ and Al were investigated using X-Ray Diffraction (XRD) method. Optimum percentage to synthesis CaTiO3 was 3+ obtained at 40 mol%CaO-60 mol%TiO2 with a single doping of 1 mol%Pr . However, a crystal structure of 4 mol% of Al3+ co-doped with Pr3+ was determined as an optimum parameter which suitable for display imaging. Keywords: calcium titanate, anatase, rutile Abstrak Semenjak tiga dekad yang lalu telah menunjukkan peningkatan yang ketara bagi kajian dan pembangunan dalam bidang fotolumiscen. Peningkatan ini berkembang dengan meluas disebabkan oleh kebolehannya untuk diaplikasikan dalam pelbagai kegunaan harian. Dalam manuskrip ini, kalsium titania (CaTiO3) telah dikaji untuk mencari bahan perumah dengan sifat struktur yang bersesuaian bagi aplikasi luminescen. Tindak balas keadaan o pepejal telah digunakan bagi mensintesis CaTiO3 pada suhu 1000 C selama 6 jam.
    [Show full text]
  • Occurrence, Alteration Patterns and Compositional Variation of Perovskite in Kimberlites
    975 The Canadian Mineralogist Vol. 38, pp. 975-994 (2000) OCCURRENCE, ALTERATION PATTERNS AND COMPOSITIONAL VARIATION OF PEROVSKITE IN KIMBERLITES ANTON R. CHAKHMOURADIAN§ AND ROGER H. MITCHELL Department of Geology, Lakehead University, 955 Oliver Road, Thunder Bay, Ontario P7B 5E1, Canada ABSTRACT The present work summarizes a detailed investigation of perovskite from a representative collection of kimberlites, including samples from over forty localities worldwide. The most common modes of occurrence of perovskite in archetypal kimberlites are discrete crystals set in a serpentine–calcite mesostasis, and reaction-induced rims on earlier-crystallized oxide minerals (typically ferroan geikielite or magnesian ilmenite). Perovskite precipitates later than macrocrystal spinel (aluminous magnesian chromite), and nearly simultaneously with “reaction” Fe-rich spinel (sensu stricto), and groundmass spinels belonging to the magnesian ulvöspinel – magnetite series. In most cases, perovskite crystallization ceases prior to the resorption of groundmass spinels and formation of the atoll rim. During the final evolutionary stages, perovskite commonly becomes unstable and reacts with a CO2- rich fluid. Alteration of perovskite in kimberlites involves resorption, cation leaching and replacement by late-stage minerals, typically TiO2, ilmenite, titanite and calcite. Replacement reactions are believed to take place at temperatures below 350°C, 2+ P < 2 kbar, and over a wide range of a(Mg ) values. Perovskite from kimberlites approaches the ideal formula CaTiO3, and normally contains less than 7 mol.% of other end-members, primarily lueshite (NaNbO3), loparite (Na0.5Ce0.5TiO3), and CeFeO3. Evolutionary trends exhibited by perovskite from most localities are relatively insignificant and typically involve a decrease in REE and Th contents toward the rim (normal pattern of zonation).
    [Show full text]
  • The Titanium Industry: a Case Study in Oligopoly and Public Policy
    THE TITANIUM INDUSTRY: A CASE STUDY IN OLIGOPOLY AND PUBLIC POLICY DISSERTATION Presented in Partial Fulfillment of the Requirements for the Degree Doctor of Philosophy In the Graduate School of the Ohio State University by FRANCIS GEORGE MASSON, B.A., M.A. The Ohio State University 1 9 5 k Content* L £MR I. INTRODUCTION............................................................................................... 1 II. THE PRODUCT AND ITS APPLICATIONS...................................... 9 Consumption and Uses ................................. 9 Properties ........................................................ ...... 16 III. INDUSTRY STRUCTURE................................................................................ 28 Definition of the I n d u s t r y ............................................ 28 Financial Structure. ..••••••.••. 32 Alloys and Carbide Branch. ........................... 3 k Pigment Branch .............................................................................. 35 Primary Metal Branch ................................. 1*0 Fabrication Branch ................................. $0 IT. INDUSTRY STRUCTURE - CONTINUED............................................. $2 Introduction ................................ $2 World Production and Resources ................................. $3 Nature of the Demand for Ram Materials . $8 Ores and Concentrates Branch. ••••••• 65 Summary.................................................................. 70 V. TAXATION. ANTITRUST AND TARIFF POLICY............................
    [Show full text]
  • In Situ X-Ray Diffraction Study of Phase Transitions of Fetio3 at High Pressures and Temperatures Using a Large-Volume Press and Synchrotron Radiation
    American Mineralogist, Volume 91, pages 120–126, 2006 In situ X-ray diffraction study of phase transitions of FeTiO3 at high pressures and temperatures using a large-volume press and synchrotron radiation LI CHUNG MING,1,* YOUNG-HO KIM,2 T. UCHIDA,3 Y. WANG,3 AND M. RIVERS3 1Hawaii Institute of Geophysics and Planetology, University of Hawaii, Honolulu, Hawaii 96822, U.S.A. 2Department of Earth and Environment Science, Gyeongsang National University, Jinju 660-701, Korea 3The University of Chicago, 5640 South Ellis Avenue, Chicago, Illinois 60637, U.S.A. ABSTRACT The phase transformation from ilmenite to perovskite in FeTiO3 was directly observed using synchrotron-based X-ray diffraction and a large-volume press. The perovskite phase is temperature quenchable at 20 GPa and converts into the LiNbO3 phase at pressures below 15 GPa at room tem- perature. The LiNbO3 phase transforms into the ilmenite phase at 10 GPa and 673 K. However, the back-transformation from the ilmenite to the LiNbO3 phase was not observed, thus strongly suggesting that the LiNbO3 phase is not thermodynamically stable but rather a retrogressive phase formed from perovskite during decompression at room temperature. By cycling the pressure up and down at temperatures between 773 and 1023 K, the perovskite- ilmenite transformation could be observed in both directions, thus conÞ rming that perovskite is the true high-pressure phase with respect to the ilmenite phase at lower pressures. The phase boundary of the perovskite-ilmenite transformation thus determined in this study is represented by P (GPa) = 16.0 (±1.4) – 0.0012 (±0.0014) T (K), which is inconsistent with P = 25.2 – 0.01 T (K) reported previously (Syono et al.
    [Show full text]
  • Perovskite Catio3 C 2001-2005 Mineral Data Publishing, Version 1 Crystal Data: Orthorhombic, Pseudocubic
    Perovskite CaTiO3 c 2001-2005 Mineral Data Publishing, version 1 Crystal Data: Orthorhombic, pseudocubic. Point Group: 2/m 2/m 2/m. Commonly resemble distorted cubes, to 12 cm, striated k [001] and [110], rarely cubo-octahedra or octahedra, with additional forms, skeletal, dendritic; reniform, granular massive. Twinning: 90◦and 180◦ about [101], rarely 180◦ about [121], giving complex penetration twins; lamellar and sectored. Physical Properties: Cleavage: {001}, imperfect. Fracture: Uneven to subconchoidal. Tenacity: Brittle. Hardness = 5.5 D(meas.) = 3.98–4.26 D(calc.) = 4.02 (synthetic). Optical Properties: Opaque, transparent in thin fragments. Color: Iron-black, brown, reddish brown to yellow; colorless to dark brown in transmitted light; dark bluish gray in reflected light. Streak: White to grayish white. Luster: Adamantine to metallic; may be dull. Optical Class: Biaxial (+); commonly isotropic. Pleochroism: Weak; Z > X. Orientation: X = a; Y = c; Z = b. Dispersion: r> v. n= 2.34–2.37 2V(meas.) = 90◦ R: (400) 19.2, (420) 18.8, (440) 18.4, (460) 18.0, (480) 17.6, (500) 17.3, (520) 17.0, (540) 16.8, (560) 16.6, (580) 16.4, (600) 16.2, (620) 16.1, (640) 16.0, (660) 16.0, (680) 15.9, (700) 15.9 Cell Data: Space Group: P nma (synthetic). a = 5.447(1) b = 7.654(1) c = 5.388(1) Z=4 X-ray Powder Pattern: Synthetic. 2.701 (100), 1.911 (50), 2.719 (40), 1.557 (25), 1.563 (16), 3.824 (14), 1.567 (14) Chemistry: (1) (2) (3) (1) (2) (3) Nb2O5 25.99 FeO 5.69 SiO2 0.33 MgO trace TiO2 58.67 38.70 58.75 CaO 40.69 23.51 41.25 Al2O3 0.82 Na2O 1.72 RE2O3 3.08 K2O 0.44 Total 99.36 100.28 100.00 2+ (1) Val d’Aosta, Italy.
    [Show full text]
  • Electrical Properties of Cati03
    The University of New South Wales Faculty of Science and Technology School of Materials Science and Engineering Electrical Properties of CaTi03 A Thesis in Ceramic Engineering by Mei-Fang Zhou Submitted in Partial Fulfilment of the Requirements for the Degree of Doctor of Philosophy March 2004 U N b W 2 7 JAN 2005 LIBRARY CERTIFICATE OF ORIGINALITY I hereby declare that this submission is my own work and to the best of my knowledge it contains no materials previously published or written by another person, nor material which to a substantial extent has been accepted for the award of any other degree or diploma at UNSW or any other educational institution, except where due acknowledgement is made in the thesis. Any contribution made to the research by others, with whom I have worked at UNSW or elsewhere, is explicitly acknowledged in the thesis. I also declare that the intellectual content of this thesis is the product of my own work, except to the extent that assistance from others in the project’s design and conception or in style, presentation and linguistic expression is acknowledged. (Signed) ACKNOWLEDGMENTS The author would like to express her thanks to the following people for their contributions to the completion of this work: Prof. J. Nowotny, my supervisor, for sparking my interest in this thesis project and for providing valuable advice on various aspects of the project. I am grateful for his constant encouragement and great assistance with the research plan, thesis corrections and valuable discussion. In particular, he contributed exceptional expertise in the defect chemistry of amphoteric semiconducting oxides.
    [Show full text]
  • Electrocatalytic Properties of Calcium Titanate, Strontium Titanate, and Strontium Calcium Titanate Powders Synthesized by Solution Combustion Technique
    Hindawi Advances in Materials Science and Engineering Volume 2019, Article ID 1612456, 7 pages https://doi.org/10.1155/2019/1612456 Research Article Electrocatalytic Properties of Calcium Titanate, Strontium Titanate, and Strontium Calcium Titanate Powders Synthesized by Solution Combustion Technique Oratai Jongprateep ,1,2 Nicha Sato ,1 Ratchatee Techapiesancharoenkij,1,2 and Krissada Surawathanawises1 1Department of Materials Engineering, Faculty of Engineering, Kasetsart University, Bangkok 10900, !ailand 2Materials Innovation Center, Faculty of Engineering, Kasetsart University, Bangkok 10900, !ailand Correspondence should be addressed to Oratai Jongprateep; [email protected] Received 29 October 2018; Accepted 13 February 2019; Published 4 April 2019 Academic Editor: Alexander Kromka Copyright © 2019 Oratai Jongprateep et al. *is is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Calcium titanate (CaTiO3), strontium titanate (SrTiO3), and strontium calcium titanate (SrxCa1−xTiO3) are widely recognized and utilized as dielectric materials. *eir electrocatalytic properties, however, have not been extensively examined. *e aim of this research is to explore the electrocatalytic performance of calcium titanate, strontium titanate, and strontium calcium titanate, as potential sensing materials. Experimental results revealed that CaTiO3, SrTiO3, and Sr0.5Ca0.5TiO3 powders synthesized by the solution combustion technique consisted of submicrometer-sized particles with 2 specific surface areas ranging from 4.19 to 5.98 m /g. Optical bandgap results indicated that while CaTiO3 and SrTiO3 had bandgap energies close to 3 eV, Sr0.5Ca0.5TiO3 yielded a lower bandgap energy of 2.6 eV. Cyclic voltammetry tests, measured in 0.1 M sodium nitrite, showed oxidation peaks occurring at 0.58 V applied voltage.
    [Show full text]
  • The Investigation of E-Beam Deposited Titanium Dioxide and Calcium Titanate Thin Films
    ISSN 1392–1320 MATERIALS SCIENCE (MEDŽIAGOTYRA). Vol. 19, No. 3. 2013 The Investigation of E-beam Deposited Titanium Dioxide and Calcium Titanate Thin Films Kristina BOČKUTĖ 1 ∗, Giedrius LAUKAITIS 1, Darius VIRBUKAS 1, Darius MILČIUS 2 1 Physics Department, Kaunas University of Technology, Studentu str. 50, LT-51368 Kaunas, Lithuania 2 Center for Hydrogen Energy Technologies, Lithuanian Energy Institute, Breslaujos 3, LT-44403 Kaunas, Lithuania http://dx.doi.org/10.5755/j01.ms.19.3.1805 Received 05 June 2012; accepted 05 January 2013 Thin titanium dioxide and calcium titanate films were deposited using electron beam evaporation technique. The substrate temperature during the deposition was changed from room temperature to 600 °C to test its influence on TiO2 film formation and optical properties. The properties of CaTiO3 were investigated also. For the evaluation of the structural properties the formed thin ceramic films were studied by X-ray diffraction (XRD), energy dispersive spectrometry (EDS), scanning electron microscopy (SEM) and atomic force microscopy (AFM). Optical properties of thin TiO2 ceramics were investigated using optical spectroscope and the experimental data were collected in the ultraviolet-visible and near-infrared ranges with a step width of 1 nm. Electrical properties were investigated by impedance spectroscopy.It was found that substrate temperature has influence on the formed thin films density. The density increased when the substrate temperature increased. Substrate temperature had influence on the crystallographic, structural and optical properties also. Keywords: electron beam evaporation, titanium oxide, calcium titanate, optical properties. 1. INTRODUCTION∗ based compounds as calcium titanates are thermally and chemically stable, and they are also known for their phase Titanium dioxide, also known as titania, is one the transitions, which strongly affect their physical and most investigated transition metal oxide due to its chemical properties.
    [Show full text]
  • The American Mineralogist Journal of the Mineralogical Society of America
    THE AMERICAN MINERALOGIST JOURNAL OF THE MINERALOGICAL SOCIETY OF AMERICA Vol. 46 MAY-JUNE, 1961 Nos. 5 and 6 KIMZEYITE, A ZIRCONIUM GARNET FROM MAGNET COVE, ARKANSAS* CHARLES MILTON, BLANCHE L. INGRAM, AND LAWRENCE V. BLADE, U. S. Geological Survey, Washington, D. C. ABSTRACT Kimzeyite, Ca3(Zr, 'Ii, Mg, Fe", Nb)z(AI, Fe"', Si),012, is a new type of garnet oc- curring as dodecahedrons modified by trapezohedron at Magnet Cove, Arkansas, in a carbonatite with abundant apatite, monticellite, calcite, perovskite (dysanalyte), magne- tite, and minor biotite, pyrite, and vesuvianite. It is dark brown, H about 7, isotropic, in- soluble in acids, infusible before the blowpipe, D = 4.0, n = 1.94. The three strongest x-ray powder pattern lines with intensities as measured are 1.667 (10), 2.539 (9), 2.79 (8); the unit cell constant is 12.46 A. Microchemical analysis gave CaO 29.8, Zr02 29.9, Ti203 5.0, MgO 0.5, FeO 0.8, Nb205 1.0, AhO" 11.0, Fe203 13.4, Si02 9.6, sum 101.0 which computes to Cas.n (Zrl.42+4Tio.4o+3Mgo.o7+21'eO.07+2Nbu. 05+;)(Ah.2. +3Feo.98+3Sio. 94+4)012.00. Basically, this is Ca"Zr2(AI,Si)012 with Ti replacing Zr and Fe replacing AI. Zirconium has been found in other garnets (schor]omite from Magnet Cove, melanite from Kaiserstuhl, Germany, and titanian andradite from Oka, Quebec) in quantity up to severa] per cent, but in none of these is it a major constituent. Kimzeyite is named in honor of the Kimzey family, long known in connection with Magnet Cove mineralogy.
    [Show full text]