DOCSLIB.ORG

Clothing: Purchase, Rental, and Cleaning Group B – Specification Sheet

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Clothing: Purchase, Rental, and Cleaning Group B – Specification Sheet Clothing: Purchase, Rental, and Cleaning Group B – Specification Sheet *Customers may request to add embellishments to the products in this group for an additional cost. The price includes all costs associated with the acquisition and/or creation of the embellishments (e.g. setup fees). 1. Long-Sleeve Work Shirt (Men’s) • Sizes: S - 5XL (Longs add 2” to the body), sleeve lengths: S (31 ½”), M (33"), L (34 ½”) XL (36") • Colors: Include but not limited to Khaki • Material: 65% polyester, 35% cotton blend • Style: Banded buttonhole collar, two chest pockets with flaps and button closures, box pleat in back, and round dress style bottom hem. The shirt front shall close with a placket front with at least six buttons in matching or coordinating color. Buttonholes are lockstitched. One pocket and flap each front, inverted pleat. Banded collar closing at the center front with a horizontal buttonhole on the left side and a corresponding button on the right side. One flap over each pocket, and one buttonhole for closure to pocket. 2. Short-Sleeve Work Shirt (Men’s) • Sizes: S - 5XL (Longs add 2” to the body) • Colors: Include but not limited to Khaki • Material: 65% polyester, 35% cotton blend • Style: Banded buttonhole collar, two chest pockets with flaps and button closures, box pleat in back, and round dress style bottom hem. The shirt front shall close with a placket front with at least six buttons in matching or coordinating color. Buttonholes are lockstitched. One pocket and flap each front, inverted pleat. One flap over each pocket, and one buttonhole for closure to pocket. 3. Long-Sleeve Dress Shirt (Men’s) • Sizes: 14 ½ , 15, 15 ½ , 16, 16 ½ , 17, 17 ½ , 18 ½ , 19, 20, and 22 inches, sleeve lengths: 32 - 37 inches. • Colors: Include but not limited to White • Material: 65% polyester/35% combed cotton poplin, permanent press with soil release finish, 4.5 ounces per square yard. • Style: Law Enforcement style shirt with banded collar, two-piece yoke, and pockets with flaps, sewn-in creases and 3/16" rolled bottom hem. Long sleeves with radiuses corners, lined with one button/buttonhole closure. Cuff width 2 ½", topstitched 3". Sleeves have a 1 1/8" wide finished sleeve placket with button and buttonhole closure. Dress style banded collar, fully lined with polyester blend, collar stays and topstitching. Top center left front, 1 ½" wide, is lined and 3" topstitch. Right front is hemmed at 7/8". Six buttons plus one at collar band. Spare replacement buttons at bottom right front. Buttonholes are lockstitched. Each front has a sewn-in military crease with the center of the flap and box pleat on pocket. One pocket and flap each front. The yoke shall be approximately 2 ½ " wide at the center neck and 2" wide at the armholes. There shall be button down shoulder straps affixed to each shoulder of the same material. Shirts shall have Poplin Law Enforcement creases. Two on the front and two on the back. Front to be centered with the center of each flap and pocket button shall be permanently creased. Stitched creases are unacceptable due to puckered appearance after laundering. One pocket each front with mitered corners and 1" box pleat. Five pockets 3" wide and 5 5/8" deep with mitered corners. Self-fabric scalloped flaps over each pocket, with one false button. Velcro fasteners sewn in corners of each flap. Separate self-material pencil compartment is located on left pocket. 4. Long-Sleeve Work Shirt (Women’s) • Sizes: XS - 4XL • Colors: Include but not limited to Khaki • Material: 65% polyester, 35% cotton blend Page 1 of 11 Clothing: Purchase, Rental, and Cleaning Group B – Specification Sheet • Style: Banded buttonhole collar, two chest pockets with flaps and button closures, box pleat in back, and round dress style bottom hem. The shirt front shall close with a placket front with at least six buttons in matching or coordinating color. Buttonholes are lockstitched. One pocket and flap each front, inverted pleat. Banded collar closing at the center front with a horizontal buttonhole on the right side and a corresponding button on the left side. One flap over each pocket, and one buttonhole for closure to pocket. 5. Short-Sleeve Work Shirt (Women’s) • Sizes: XS - 4XL • Colors: Include but not limited to Khaki • Material: 65% polyester, 35% cotton blend • Style: Banded buttonhole collar, two chest pockets with flaps and button closures, box pleat in back, and round dress style bottom hem. The shirt front shall close with a placket front with at least six buttons in matching or coordinating color. Buttonholes are lockstitched. One pocket and flap each front, inverted pleat. Banded collar closing at the center front with a horizontal buttonhole on the right side and a corresponding button on the left side. One flap over each pocket, and one buttonhole for closure to pocket. 6. Long-Sleeve Dress Shirt (Women’s) • Sizes: 30, 32, 34, 36, 38, 40, 42, 44, 46, 48, 50, 52 • Colors: Include but not limited to White • Material: 65% polyester/35% combed cotton poplin, permanent press with soil release finish, 4.5 ounces per square yard. • Style: Law Enforcement style shirt with banded collar, two-piece yoke, and pockets with flaps, sewn-in creases and 3/16" rolled bottom hem. Long sleeves with radiuses corners, lined with one button/buttonhole closure. Cuff width 2 ½”, topstitched 3". Sleeves have a 1 1/8” wide finished sleeve placket with button and buttonhole closure. Dress style banded collar, fully lined with polyester blend, collar stays and topstitching. Top center left front, 1 ½” wide, is lined and 3" topstitch. Left front is hemmed at 7/8". Six buttons plus one at collar band. Spare replacement buttons at bottom right front. Buttonholes are lockstitched. Each front has a sewn-in Law Enforcement crease with the center of the flap and box pleat on pocket. One pocket and flap each front. The yoke shall be approximately 2 ½” wide at the center neck and 2" wide at the armholes. There shall be button down shoulder straps affixed to each shoulder of the same material. Sewn creases on the front and back, front to be centered with the center of each flap and pocket button shall be permanently creased. Stitched creases are unacceptable due to puckered appearance after laundering. One pocket each front with mitered corners and 1" box pleat. Five pockets 3" wide and 5 5/8” deep with mitered corners. Self-fabric scalloped flaps over each pocket, with one false button. Velcro fasteners sewn in corners of each flap. Separate self-material pencil compartment is located on left pocket. 7. Long-Sleeve Cotton Twill Shirt (Men’s) • Sizes: XS - 4XL • Colors: Include but not limited to Hunter Green, White, Navy • Material: 100% cotton twill • Style: Dress style shirt with pocket, button down collar, bone horn buttons, full cut. Two-piece sleeves with a placket closing. Cuffs attached with a double stitch and shall have two buttons for adjustment. The shirt front shall close with a placket front with six buttons. The collar shall sit on a 1 ½” collar band. The band will close at the center front with a horizontal buttonhole on the right side and a corresponding button on the left side. The collar shall be interlined and shall have 2" collar stays. Page 2 of 11 Clothing: Purchase, Rental, and Cleaning Group B – Specification Sheet 8. Short-Sleeve Cotton Twill Shirt (Men’s) • Sizes: XS - 4XL • Colors: Include but not limited to Hunter Green, White, Navy • Material: 100% cotton twill • Style: Dress style shirt with no pocket, button down collar, bone horn buttons, full cut. The shirt front shall close with a placket front with six buttons. The collar shall sit on a 1 ½” collar band. The band will close at the center front with a horizontal buttonhole on the right side and a corresponding button on the left side. The collar shall be interlined and shall have 2" collar stays. 9. Long-Sleeve Cotton Twill Shirt (Women’s) • Sizes: XS - 4XL • Colors: Include but not limited to Hunter Green, White, Navy • Material: 60% cotton 40% Poly twill • Style: Dress style shirt with pocket, button down collar, bone horn buttons, full cut. Long sleeve with two- piece sleeves with a placket closing. Cuffs attached with a double stitch and shall have two buttons for adjustment. The shirt front shall close with a placket front with six buttons. The collar shall sit on a 1 ½” collar band. The band will close at the center front with a horizontal buttonhole on the right side and a corresponding button on the left side. The collar shall be interlined and shall have 2" collar stays. 10. Short-Sleeve Cotton Twill Shirt (Women’s) • Sizes: XS - 4XL • Colors: Include but not limited to Hunter Green, White, Navy • Material: 60% cotton 40% Poly twill • Style: Dress style shirt with no pocket, button down collar, bone horn buttons, full cut. The shirt front shall close with a placket front with six buttons. The collar shall sit on a 1 ½” collar band. The band will close at the center front with a horizontal buttonhole on the right side and a corresponding button on the left side. The collar shall be interlined and shall have 2" collar stays. 11. Dress Slacks (Men’s) • Sizes: Waist sizes: 28, 30, 32, 34, 36, 38, 40, 42, 44, 46, 48, 50, 52, and 54 with inseams up to 37". (Hemmed to customer preference) • Colors: Include but not limited to Spruce Green • Material: 100% textured woven polyester with soil release finish. Crush proof hook and eye closure. 6.8 ounces per square yard. • Style: Plain front, zipper fly with tab, quarter top front pockets, welt face back pockets.
Load more

Recommended publications
  • Dressing Aids F Are Available Through Specialtyretailers
    The War Amps For Your Information Tel.: 1 877 622-2472 Fax: 1 855 860-5595 [email protected] Dressing Aids rom buttons, buckles, zippers and laces, these Fsimple fasteners can pose difficulties in an amputee’s daily activities. Featured below are various Velcro tabs dressing aids that can make many of these tasks easier. Some can be made using household items and others are available through specialty retailers. Hassle-free Fasteners • Velcro tabs under shirt or blouse buttons instead of conventional button holes. • A Velcro strip instead of a zipper in the fly of trousers. • Velcro on jacket cuffs. • Toggle buttons on outer wear which are easier to manage than stiff, flat buttons. Elastic cufflink • Cuff links made of elastic thread between two buttons keep cuffs looking tidy while letting you slide your hand in and out without undoing the button. • Some button-up shirts can be put on without being fully unbuttoned, simply leave enough buttons undone to allow room for your head, and then A C fasten the rest later. B D Button Hooks To assist the amputee with buttoning clothing, various button hooks are available including the regular handle(A), rubber handle(B), cuff handle(C), and ball or knob handle(D). Prosthetic Limbs and Devices Prosthetic A button hook has a small wire loop that slips over the button and when pulled, guides the button through the buttonhole. Zipper Pull Rings For those who have difficulty holding onto and pulling the regular zipper tabs, a variety of zipper pull rings are available which attach to the regular zipper tab and which can be grasped more easily by artificial limbs.
    [Show full text]
  • Shirt, Flame-Resistant Aramid
    5100-91K April 28, 2020 Supersedes 5100-91J February 24, 2011 U.S. DEPARTMENT OF AGRICULTURE FOREST SERVICE SPECIFICATION FOR SHIRT, FLAME RESISTANT ARAMID Beneficial comments (recommendations, additions, deletions) and any pertinent data that may be used in improving this document should be addressed: via electronic mail <[email protected]> or U.S. mail to the U.S. Department of Agriculture, Forest Service, National Technology and Development Program, 5785 Highway 10 West, MT 59808. Distribution Statement A: Approved for public release; distribution is unlimited. FSC 8415 5100-91K CONTENTS 1. SCOPE AND CLASSIFICATION ............................................................................................ 4 1.1. Scope. This specification covers the requirements for flame resistant aramid shirts. .......................... 4 1.2. Classification. The shirt shall be of one type in the following sizes (see 6.2): ...................................... 4 1.3. Interpretations and Definitions. ............................................................................................................ 4 2. APPLICABLE DOCUMENTS ..................................................................................................................... 4 2.1. Government documents. ..................................................................................................................... 4 2.2. Non-Government publications. ...........................................................................................................
    [Show full text]
  • Instruction Book
    INSTRUCTION BOOK IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety precautions should always be followed, including the followings: Read all instructions before using this appliance. DANGER— To reduce the risk of electric shock: 1. An appliance should never be left unattended when plugged in. Always unplug this sewing machine from the electric outlet immediately after using and before cleaning. WARNING— To reduce the risk of burns, fire, electric shock, or injury to persons: 1. Do not allow children to play with the machine. The machine is not intended for use by children or infirmed persons without proper supervision. Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near children. 2. Use this appliance only for its intended use as described in this owner’s manual. Use only attachments recommended by the manufacturer as contained in this owner’s manual. 3. Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return this sewing machine to the nearest authorized dealer or service center for examination, repair, electrical or mechanical adjustment. 4. Never operate the appliance with any air opening blocked. Keep ventilation openings of this sewing machine and foot controller free from accumulation of lint, dust and loose cloth. 5. Never drop or insert any object into any opening. 6. Do not use outdoors. 7. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
    [Show full text]
  • Bucklepage 9 – Part Nine 17Th-18Th Century
    Home C J’s Metal detecting pages Coin galleries BUCKLES BUCKLEPAGE 05/09/2013 BY NMS Having already looked at some buckle types of the 17th century we again start in that period but with buckles that are technically of a different form of construction. These are distinguished from all other types by having a double-loop frame (as Types IIIA-IIID) but with the frame drilled to take a separate pin or spindle. These I have classified as Type V. They were generally made to be removable and so the previously common ‘sandwich’ type buckle-plate used for attachment to straps and belts is replaced by a chape that attaches the buckle by a stud, a hook, or a spike. When used for the shoe these buckles were attached across the instep by two straps called latchets. The buckle was attached to one latchet by the chape. The second latchet was then pulled through the buckle frame to the required tension for securing the shoe and then fastened by the spike of the tongue. See fig.9: xix for the terms used to describe the parts of these buckles. Strictly speaking the chape constitutes all the moving parts within the buckle frame but the term is used here to describe the type of fastening employed to attach the buckle to the shoe. Although shoe buckles had been used in previous times, by the late 1500′s they had been replaced by rosettes and ribbon ties and these continued in use through most of the 17thc. However it is clear that by 1660 buckles were again being used for fastening shoes, at least by the upper classes, and that they were of this removable type: ‘This day I began to put on buckles to my shoes’ - the diary of Samuel Pepys – entry for January 22nd, 1660.
    [Show full text]
  • Fixing Torn Buttonholes No
    C O N S U M E R S E R I E S CLOTHING Fixing torn buttonholes no. 8.528 by K. Williams1 Do you have clothes with buttonholes that are torn or missing some stitches? Quick Facts... General Directions If the buttonhole is torn at the end, to fix the tear, do the following: If a buttonhole is torn at the end, • Take out the buttonhole stitches around the tear. it may be patched and recut. • Cut a piece of material a little bigger than the tear to use as a patch. Use the same color if you can. (Figure 1A.) If stitches are coming loose from • Put the patch between the facing and outer material. a buttonhole, they may be • Mend the tear by stitching back and forth through all three layers of material. resewn by machine using a Machine stitching holds better than hand stitching. (Figure 1B.) zigzag stitch or by hand using a • Cut through the patch to make the buttonhole the same length that it was. buttonhole stitch. (Figure 1C.) Sewing By Hand To resew a buttonhole by hand, start at the good end of the buttonhole. Sew over stitches that are still there. • Knot the thread and push the needle from the wrong side of the buttonhole through the stitches. • Push the needle down through the buttonhole and up through the material near the end of the buttonhole. (Figure 1D.) • Bring the thread under the point of the needle from left to right. (Figure 1E.) • Pull the needle and thread through the material.
    [Show full text]
  • PDF Download How to Stitch Custom Clasps
    HOW TO STITCH CUSTOM CLASPS DVD PDF, EPUB, EBOOK Melinda Barta | none | 17 Oct 2011 | Interweave Press Inc | 9781596687165 | English | Loveland, CO, United States How to Stitch Custom Clasps DVD PDF Book Page 53 Pull the buttonhole lever down as far as it will go. Large Viking Cloak Clasp. Now you can trim off the extra string. Celtic Dragon Cloak Clasp. Page 67 Changing needle drop position Press the stitch width adjusting button. Page 54 Start the machine to sew the buttonhole. The Rampant Gryphon Belt Concho is crafted with four rivets on the back and comes with caps. View wishlist Shopping Cart: 0 Items. If you just need something to cover your girls, this bandeau made from a T-shirt will do the trick! Share it with us! Five are included. How do I reuse…? JavaScript seems to be disabled in your browser. When you come to our site to look for an item, we will only use this information to improve our site and will not store it with information we could use to identify you. Large Belt Buckle - Antiqued Brass. Me looking all awkward and talking about sports bra diys ontheblog linkinprofile?? Search Search for: Search. Participated in the Bracelet Contest View Contest. I'm interested in recycling and nature crafts, food security, STEM education, and the DIY lifestyle, however it's manifested--making myself some underwear out of T-shirts? Page Sewing The Pattern Combination From The Beginning Sewing the pattern combination from the beginning If you have to stop sewing the pattern combination and wish to sew it over again, press the memory button to sew the pattern combination from the beginning.
    [Show full text]
  • Hole Is the Buttonhole of Today’S Fashion
    tailoring series MAKING BOUND BUTTONHOLES Beautiful buttonholes lend distinction to any garment and the bound button- hole is the buttonhole of today’s fashion. They are the hallmark of a profes- sionally tailored garment. Bound buttonholes are not hard to make if you follow these instructions and do careful measuring, accurate basting, and uuhurrz‘ed stitching and execution of each step. STEP I. 1. Using tailor’s carbon or a lead pencil, mark the center front line .on the right front interfacing. If you have not altered the pattern lengthwise, mark the location line of the buttonhole from the pattern. If you have altered the length of the jacket or coat, mark new location lines, being sure they are evenly spaced. 2. Make a line the length of the right front interfacing 1/3” toward the jacket ( edge from the center front line. Measure the width of your button. The width of the buttorr+ 1/8” = the length of the buttonhole. Mark a line this. distance toward the inside of the center front line. These lines mark where the buttonhole will begin and end. 3. Mark with pencil, lines on the interfacing 1/3” above and below each loca- tion line. These lines mark the approximate width of each buttonhole. If the material is bulky, these may 'need to be 3/16.” CHECK TO MAKE SURE YOU HAVE MARKED (1) center front line (2) buttonhole location lines (3) lines marking width ‘of buttonhole STEP II 1. With contrasting thread, machine baste ' ° (6 stitches per inch) along marked lines so ZWJJ/VOJJ1.73.77? they Will show on the right side.
    [Show full text]
  • Buttonholes and Pockets : Clothing Leaflet 9
    University of Nebraska - Lincoln DigitalCommons@University of Nebraska - Lincoln Nebraska 4-H Clubs: Historical Materials and Publications 4-H Youth Development 1965 Buttonholes and Pockets : Clothing Leaflet 9 Helen Rocke Follow this and additional works at: https://digitalcommons.unl.edu/a4hhistory Part of the Service Learning Commons Rocke, Helen, "Buttonholes and Pockets : Clothing Leaflet 9" (1965). Nebraska 4-H Clubs: Historical Materials and Publications. 110. https://digitalcommons.unl.edu/a4hhistory/110 This Article is brought to you for free and open access by the 4-H Youth Development at DigitalCommons@University of Nebraska - Lincoln. It has been accepted for inclusion in Nebraska 4-H Clubs: Historical Materials and Publications by an authorized administrator of DigitalCommons@University of Nebraska - Lincoln. ~ Bu,ttonholes and Pockets ~! Helen Rocke Clothing Specialist Well made buttonholes and suitable buttons may serve as decorative feature for dresses, coats and suits. "Bound buttonholes" is a common term, of- ten used to distinguish buttonholes finished with cloth from the worked buttonhole. The kinds of cloth-finished buttonholes are the bound, corded, and piped. The directions outlined here are for making piped buttonholes. The piped buttonhole is easy to rttake, has strong corners and a neat, flat-edge finish. It is one of the most sat- isfactoryof the cloth-finished buttonholes. Placing of buttons and ::bUTWfihble's~:Buttonholes may be placed crosswise or lengthwise on the garmento The size of the buttonhole equals the diameter plus the thickness of the button. Usually buttons are placed on the center front or center back line of a garment. Buttonholes are planned far enough baC'k from the edge of the garment so that the edge of the button is about 1/4" from the garment edge.
    [Show full text]
  • Piggy Bank Canvas Check out for the Original Project Materials List
    www.bernina.com.au Piggy Bank Canvas Check out www.weallsew.com for the original project Materials List • 31cm x 41xm (12” x 16”) Canvas or similar size • Base fabric 40cm x 50cm • Iron on Interfacing 40cm x 50cm • Pink Felt Square 21cm x 30cm • 12cm Pink Zip • Pink Pipe Cleaner • Googlie Eye or similar • Pink and Black Thread • Bernette 33 Sewing Machine Method • Iron the interfacing onto the back of your base • Select the Overlocking Stitch G and change fabric. the Stitch Length to 1mm • Use the pattern provided to cut your pig out of felt. Make sure you cut out the zipper section. Use chalk of a vanishing pen to transfer the buttonhole, tail, eye and mouth markings. • Place your base fabric under the presser foot so the edge of the fabric, sits on the right inside edge of the foot. • Wind a bobbing and thread your machine with the Pink thread. Make sure the standard presser foot is attached. www.bernina.com.au • Stitch around all four sides of your base fabric • Place the pig under your presser foot so the with the Overlock stitch. zipper is to the right. The needle should be a few millimetres away from the edge of the felt. • Take your felt pig and slide the zip under the cut out section. Make sure the zip is centred and pin it in place. • Attach the Zipper Foot to the machine. • Stitch around the four sides of the zip. Make sure you start and end with some reverse stitches. • Select Stitch A and move the Stitch Length to 2.5mm • Remove the Zipper Foot and attach the Standard Foot.
    [Show full text]
  • Buttons & Buttonholes
    CT-MMB.189 BUTTONS & BUTTONHOLES BUTTONS Selection Button selection depends on the type and style Buttons can be fascinating, functional, and of the garment. Buttons should be selected fashionable. They are fascinating because of their BEFORE making buttonholes or button loops. many sizes, shapes, colors, and designs. They are Consider the following when making your functional because they are one of the major selection: methods of opening and closing garments. Buttons are fashionable because they also decorate and $ The pattern will have a suggested size which enhance apparel & other items. was determined as the pattern was being made. If the button size is changed, so must the size of the button and buttonhole placket. $ Weight of fabric B Heavy fabric needs heavier and larger buttons; lighter fabric needs lighter and smaller buttons. $ Fabric design B Buttons can blend with the History fabric OR they can call attention to the area. The term is from the French word, bouton, To call attention to the area use solid colored meaning a round object. Since the 13th century, buttons on prints and patterned buttons on buttons have been used as fasteners. Before that, solid color fabrics. they were used more for their decorative and symbolic value. Today, buttons continue to be used as decoration, but their placement once served a useful purpose. For instance buttons on the back of men’s coats served as a way to fasten coat tails up out of the $ Use a smooth, flat-textured button on smooth way when riding on horseback. During Frederick textured fabrics. Shiny buttons are best on the Great=s reign, it was customary for three decorative, shiny fabrics.
    [Show full text]
  • Inst-Book-Dc4030pr.Pdf
    INSTRUCTION BOOK IMPORTANT SAFETY INSTRUCTIONS This sewing machine is not a toy. Do not allow children to play with this machine. The machine is not intended for use by children or mentally infirm persons without proper supervision. This sewing machine is designed and manufactured for household use only. Read all instructions before using this sewing machine. DANGER— To reduce the risk of electric shock: 1. An appliance should never be left unattended when plugged in. Always unplug this sewing machine from the electric outlet immediately after using and before cleaning. 2. Always unplug before replacing a sewing machine bulb. Replace bulb with same type rated 12 Volts, 5 Watts. WARNING— To reduce the risk of burns, fire, electric shock, or injury to persons: 1. Do not allow children to play with the machine. The machine is not intended for use by children or infirmed persons without proper supervision. Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near children. 2. Use this appliance only for its intended use as described in this owner’s manual. Use only attachments recommended by the manufacturer as contained in this owner’s manual. 3. Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return this sewing machine to the nearest authorized dealer or service center for examination, repair, electrical or mechanical adjustment. 4. Never operate the appliance with any air opening blocked.
    [Show full text]
  • 3321 Instruction Manual IMPORTANT SAFETY INSTRUCTIONS When Using an Electrical Appliance, Basic Safety Should Always Be Needle Causing It to Break
    3321 Instruction Manual IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety should always be needle causing it to break. followed, including the following: 9. Switch the sewing machine off ("O") when making any adjustments Read all instructions before using this sewing machine. in the needle area, such as threading needle, changing needle, threading bobbin, or changing presser foot, and the like. 10. Always unplug sewing machine from the electrical outlet when DANGER - To reduce the risk of electric shock: removing covers, lubricating, or when making any other user servicing adjustments mentioned in the instruction manual. 1. An appliance should never be left unattended when plugged in. 11. Never drop or insert any object into any opening. 2. Always unplug this appliance from the electric outlet immediately after using and before cleaning. 12. Do not use outdoors. 3. Always unplug before re-lamping. Replace bulb with same type 13. Do not operate where aerosol spray products are being used or rated 10 watts (110-120V area) or 15 watts (220-240V area). where oxygen is being administered. 14. To disconnect, turn all controls to the off ("O") position, then remove plug from outlet. WARNING - To reduce the risk of burns, fire, 15. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. electric shock, or injury to persons: 16. The sound pressure level under normal operating conditions is 1. Do not allow to be used as a toy. Close attention is necessary 75dB(A). when this appliance is used by or near children. 17.
    [Show full text]