ROOK AND POSITIVE INDUSTRIAL LIMITED (AWUTU PROJECT)

MUNICIPAL WASTE TO ENERGY PLANT

& TOMATO PASTE PROCESSING LINE PLANT

IN SUPPORT OF GOV’T ONE DISTRIC ONE FACTORY

[1]

Executive Summary

ROOK GROUP is engaged in the research development and promotion of renewable energy, components and solar energy power system; Municipal waste to energy; and then food commodities since establishment.

MISSION STATEMENT

Our mission is to provide sustainable waste and energy solutions to ensure no waste is ever wasted. This is how we are powering today and protecting tomorrow to support the Gov’t initiative of PLANTING FOOD FOR JOBS and ONE DISTRICT ONE FACTORY, with Tomato plantation and processing line plant at Awutu Senya.

The company has made continuous efforts for exploration and innovation to supply customers with safe, well developed and advanced products based on the precondition of using science to create fortune and using product to service markets, by cooperation with many solar energy component companies, municipal waste management and a combination of many energy and food security self-controlled experts

RISK FREE TECHNOLOGY

Energy-from-Waste (or waste-to-energy) facilities provide a safe, technologically advanced means of waste disposal that reduces greenhouse gases, generates clean energy and recycles metal.

According to the U.S. EPA, for every ton of municipal solid waste processed at Energy-from-Waste facilities, greenhouse gas emissions are reduced by approximately one ton. This is due to the avoidance of methane from landfills, the offset of greenhouse gases from fossil fuel electrical production and the recovery of metals for recycling.

GHANA ENERGY needs about 3,000MW from now to 2020 energy to supplement its energy requirement a study has shown for the proposed factories that will spring out by ONE DISTRICT ONE FACTORY INITIATIVES. ROOK AND POSITIVE INDUSTRIAL LIMITED a company formed out of a joint venture between its foreign partners has resolved to provide 39.87kw/h from 1000ton garbage (Municipal waste to energy) to supplement that which is being provided by the government of Ghana.

[2]

THE FOOD SECURITY

On the issue food commodities, Ghana is second leading importation of tomato products. The Gov’t also has increase school intakes through the free SHS. Our survey proves that 70% of tomato products are used as food ingredients for food preparation by the cateress, food banner, and cooks.

Fresh and raw tomato is being imported from neighboring countries and the paste is from other countries. We ROOK studies prove that Awutu in the and Afram plains in the Eastern region lands are useful and fertile for tomato plantations.

As such, a tomato processing line plant, with output capacity of 1.3ton per hour has been scheduled to establish in a 200acres factory and farm land at Awutu These projects are in support of Gov’t Initiative “PLANTING FOOD FOR JOB AND ONE DISTRICT ONE FACTORY”.

The proposed projects are the ROOK GHANA INITIATIVE with the support and under the able leaderships of; Hon. Stephen K. Quaye, DCE Awutu Senya; Hon. George Ander Member of Parliament for the Awutu Senya Constituency, The YEBOAH AFRANE TWIDAN FAMILY OF AWUTU TRADITIONAL COUNCIL

[3]

PREAMBLE The Awutu Breku is within Ghana and is north of Obrakrawa and Brayenda and southwest of Penim. Awutu Breku has an elevation of 129 meters. Sited On the Accra – highways with many resources, and prominent people such as;

Hon. G. Ander MP & Dep. Min Comm Hon Stephen Quaye – DCE Awutu

Hon Hana Teteth Former Abusuapannin K. Andoh MP and Min. Foreign Affair Yeboah Afrane Twidan Family Awutu

Michael Essen, Former Black star and Chelsea player

[4]

However, due to the Ever-increasing demand for affordable user facilities coupled with the less than proportionate increases in the revenue resources for locals. Infrastructural development in the area has not been possible for project development to match up with the increase in the populations and settlement.

This is a phenomenon which is not peculiar to AWUTU and for that matter, the country as a whole. In the light of the above, a concept of Public Private Partnerships (PPP) has evolved whereby public institutions team up With private institutions to pursue common interests for their mutual benefits.

In furtherance of the above, Rook and Positive Industrial Limited with its operational head office in Ghana together with its funding partners, are desirous to enter into a PPP arrangement with the Locals and citizenry of the AWUTU in the area of providing state-of-the art 525mw MUNICIPAL WASTE TO ENERGY PLANT AND TOMATO PASTE PROCESSING LINE PLANT in support of Gov’t Initiative ONE DISTRICT ONE FACTORY

It is worth noting that Rook and Positive Industrial Limited is capable of rising fully all the required funding needed to accomplish the objective of accommodating both the power plant and the TOMATO FACTORY

This we believe will free the Citizenry/local partner’s time and resources to be re-channeled into its core business of farming investment to support the gov’t planting food for job.

[5]

LOCATION: The 455 acres site is on the AWUTU Township areas on litigation-free land allocated by YEBOAH AFRANE TWIDAN FAMILY OF AWUTU TRADITIONAL COUNCIL, (local partner/land owner) very well suited for property development.

. SITE PHOTOS

[6]

AWUTU SENYA DISTRICT MAPS Awutu Breku is within Ghana and is north of Obrakrawa and Brayenda and southwest of Penim. Awutu Breku has an elevation of 129 meters.

[7]

PROPOSED DEVELOPMENT

(A). MUNNICIPAL WASTE TO ENERGY POWER PLANT

(B). FRESH & RAW TOMATOES PASTE PROCESSING LINE PLANT

[8]

(A) MUNNICIPAL WASTE TO ENERGY POWER PLANT

[9]

some waste site that can be managed and produce energy

[10]

Technology:

Energy-from-Waste (or waste-to-energy) facilities provide a safe, technologically advanced means of waste disposal that reduces greenhouse gases, generates clean energy and recycles metal.

According to the U.S. EPA, for every ton of municipal solid waste processed at Energy-from-Waste facilities, greenhouse gas emissions are reduced by approximately one ton. This is due to the avoidance of methane from landfills, the offset of greenhouse gases from fossil fuel electrical production and the recovery of metals for recycling.

The facility’s reprocessing of MSW with further gaining of synthetic gas to produce power is meant for introduction of modern original technologies aimed at commercial reprocessing of carbon-containing raw.

Our manufacturing scheme and hardware of the facility is designed considering an opportunity for large-module production of the facility’s pieces and assembly units that allows transportation of equipment with motor vehicles and thus, reprocessing of MWS directly at its location and storing place.

An original manufacturing scheme allows the use of exiting hydrocarbon gases and production synthetic gas for gaining of heat or power; this makes it autonomous at the maximum and expands the use of Facility, including places with deficit of energy.

[11]

This centralized facility minimizes the need for multiple weigh or transfer stations, thus a significant savings on vehicle wear, fuel, and man hours. Pyrolysis is similar to gasification and turns waste into energy-rich fuels by heating the waste under controlled conditions to produce a synthetic gas (syngas). While the processes are similar, there are some differences.

Pyrolysis involves indirect heating of waste in the absence of oxygen. Synthesis gas and solid biochar are produced. The synthesis gas can be used to generate electricity or heat. The biochar can be used as a nutrient additive to improve soils.

SYSTEM COMPONENET OF MSW

[12]

[13]

[14]

NEW OPPORTUNITIES

An effective technology of domestic and industrial waste disposal provides unique possibilities for combined efforts of the state and private business

Processing of dangerous and highly toxic waste into energy with no harm for the environment

Real actions in health care activities, in clearing of territories and nature protection

Use of an existing cities infrastructure for energy supply

Conversion Plant meets the compatible to African and Caribbean region

How it Works:

Unique flameless process for waste disposal without pollution

-Suitable for virtually all types of waste

-Converts Waste to Power

-Compact design suitable for metropolitan use

-Meets the requirements of Canada and Europe on emissions into the - environment

-Modular plant designed for specialist use

-Suitable for any climate

-Shutdowns during maintenance period are not required

-Required personnel to operate the plant and new employment opportunity for waste sorting

-Our conversion plants has no competition in the World by the Environmental standards and utilizes almost all kinds of waste with various end products

[15]

INPUT

Organic waste (domestic, sewage sludge and others)

Inorganic waste(plastic, rubber, etc.)

Special waste(household, furniture, woods, etc.)

OUTPUT

Synthetic gas 1ton not know yet base on type of garbage

Oil products – 1ton garbage produces 70gallons oil

Electricity- 1ton garbage produces 525kw/h

Heated Air (not needed)

Coke

Artic Clean Water

The Liquid Artificial Synthetic Flammable Gas can be used in a regular Kitchen and also as a Motor Engine Fuel or convert to the Power

The Artificial Flammable Synthetic gas will be supplied to Gas-generators stations to produce Electricity

[16]

Technology Advantages:

Tested and proven engineering and technology

Modular technical units

Compliance with technical norms and standards of US, Canada & Europe

Great economical and ecological benefits

Separate waste collection is not necessary

Profitable investments and low production cost

Production of environmentally clean energy

Advantages from Competitors

-Low manufacturing and Low operating cost.

-Mobile Modules gets assembled at the site into large manufacturing facility.

-With decision to increase plant capacity, just add modules and not reconstruct all conversion plant

-Spare parts availability due to the Local equipment manufacturing.

-Plant does not required an external sources of energy, it’s generates its own.

-Unique flameless process for waste disposal without pollution

-Compact design suitable for metropolitan use

-Meets the requirements of US, Canada and Europe on emissions into the environment

-Suitable for any climate

-Advantages of Power Plants vs Solar Farms & Wind Turbine Energy

-Much cheaper and affordable electricity for end user

[17]

Manpower

1. 10 automation technicians 2. 6 feedstock workers for three shifts 3. 6 output biodiesel technician for three shift 4. 6 output ash/ fertilizer technician three shift 5. 6 electrical / power technicians three shift 6. 5 suppervisors Technicians 7. 4 adminstrators 8. 10 heavy duty drivers and assistance 9. 6 non proferssional workers/labourers 10. 6 Health and hygine inspectors 11. 3 safety and security officers Over 100 feedstock drivers and assistances Over 50 waste management suppervisors and directors

[18]

(B) FRESH AND RAW TOMATOES PASTE PROCESSING PLANT; IMPUT 8TON/HOUR. AND OUTPUT 1.3TON/HOUR

[19]

From the beginning of raw fruits washing, lifting, selecting, crushing, peeling, coring, pulping etc, to various vacuum concentration, UHT sterilization, plant can provide whole solution for either BID (bag in drum) packaging or small bottles packaging (RTD, ready to drink). The plant’s premium solution includes: SINGLE LINE: 250TPD to 1500TPD Tomato Paste (hot/cold break) Processing SINGLE LINE: 100TPD to 1000TPD Citrus Juice Processing SINGLE LINE: 100TPD to 1000TPD Tropic Fruits Processing SINGLE LINE: 100CPM to 400CPM Paste/Jam

Raw Material Fresh tomato 8ton/hour End Product Tomato Paste Harvest Season 3 seasons Processing Capacity 1.3ton/h output Package Brix 16~18 70g four side sealing bags Brix 22~24 400g, 800g and 1000g tin cans

[20]

ITEM A FRSH TOMATO PRE PROCESSING SYSTEM

A1 Fresh tomato receiving tank and elevator

Machine equipped with:

Type:GCW-6.

Power: 2.2KW+2.2kw

Dimension: 3500X1500X1000MM

Weight: 150kg

Material: Stainless steel

Thickness: 2mm

Capacity: 8T/H,

A2 washing machine

Machine equipped with:

Type: GCW-6

Power: 2.2KW+2.2kw

Dimension: 3500X1500X1000MM

Weight: 150kg

Material: Stainless steel 304

Thickness: 2mm

Capacity: 8T/H,

A3 Fruit Sorter

Machine equipped with: Model: GCS-

6 Capacity: 8t/h

Power: 2.2kw

[21]

Dimension: 4000×800×800MM

Main structure with SUS304 stainless steel The fruit and vegetable can tumble freely on the roller by the rotation and revolution designing.

ITEM B Crushing, Pre-heating, Pulping system

B1 Fruit Crusher

Machine equipped with: Model: GCC-

6 Capacity:8T/H

Power: 7.5KW

Dimension: 1500×830×1840

Main structure with SUS304 stainless steel The structure is hammer slice type so the crusher can not damage the seed and guarantee the color and flavor.

B2 Storage barrel for jam

Machine Equipped with Model: GCG-

1000 Volume:

1000L

SUS 304 stainless steel

Single layer, connect with the crusher.

Polishing welding line inside and outside 300mesh

[22]

With the manhole, cleaning ball, the machine runs stability and easy to operate

B3 Conveying pump

Machine Equipped with

Capacity: 8t/h

Material in contact with the products: SUS304

Power: 4kw

Conveying the paste from crushing section to pre-heating section

B4 Pre-heater

Machine equipped with:

Model: GCPH-6

Capacity:8t/h

Dimension: 4000×1000×1500

Steam consumption: 300kg/h

Heating temperature ℃: 20-(65-80)

B5 Pulping Machine

Machine equipped with:

Model: GCP-6

Capacity: 8t/h

Power: 18.5kw

Dimension: 1935×1500X1700mm

Screen mesh diameter: 1.0 adopts the abroad advanced

[23] technology, using double stage or single stage taper type screen mesh structure, it can avoid the blocking of screen hole.

B7.Residue conveying and collecting system

Model GCWC-5

Conveying Capacity

Conveying according to the quantity of the peel and residues.

Belt 300m width m

Height: According to the height of the pulping machine

Discharge Height: The same as the conveying height

Length 2600 mm

Power 0.75 kW

B8 Jam storage tank

Model: GCG-2000

Volume: 2000L

SUS304 stainless steel

Single layer, closed style

Polishing welding line inside and outside

#250 or 304 2B With the manhole, cleaning ball, the machine runs stability and easy to operate

B10 Pre-control system/Control Panel

Material: Stainless steel

304 Using SIMENS OR

[24]

OMRON Controlled by relative components, such as breaker, electromagnetic contactor Indicator light and switch

Dimension:800X400X1900mm

C Tomato paste concentrate system

Technical data:

Model: GCVC-1

Power: 167.5kw/h

Average working capacity: 6700kg/h evaporated water

Dimension: 6500x4500x8500mm(l*w*h)

Material: SUS304 where the material is touched

Steam Consumption: 2530kg/h, 8.0bar

Heating temperature:1st effect 75±2℃

Heating temperature:2nd effect 46±2℃

Average input temperature of products: 60~68℃

Cooling tower water temperature: 24℃

In-feeding brix: 4.5%~5.5%

Output brix: 28%~30%

Features:

SUS304 stainless steel where the products meet

Incorporated Italian technology and conform to Euro-standard

Low temperature continous concentration under vacuum

External forced circulation, counter-flow and

double effect vacuum evaporating structure.

[25]

Be applicable for heat sensitive, high viscous

material such as apple puree, apricot puree,

cherry puree

Great heat exchange area, low energy

consumption and easy maintenance.

Mirror polishing with 300mesh inside, up to food

sanitary standard.

The mainframe is composed of tubular heater,

evaporating chamber, condensator, infeed

pump, prouduct recirculation pump, product

outlet pump, vacuum pump, condensate water

pump, operation platform, pressure gauge,

Condensated water can be collected and recycled

as water for steam boiler and cooling water.

On-line refractometer (Italian brand) for brix consistent control.

Main construction:

The main frame is composed of heater, evaporating chamber, multi-level pump, water tank, circular out- feed pump and operation platform.

2 sets of variable centrifuge pump for condensed water.

1 set of forced circulation pump

1 set of water discharge pump

1 set rotary pump for output products.

[26]

Key component configuration:

PLC OMRON

Touch screen OMRON

Electric elements Siemens Refractometer Italian brand or Germany brand

Electric Control System

Stainless steel for main structure and control panel OMRON, SIMENS

Controlled by relative components, such as breaker, electromagnetic contactor

Indicator light and switch

Dimension:

1000X400X1900mm

ITEM D Sterilizing system Applicable scope:

The machine is used for the sterilizing of tomato paste, onion paste, chili paste, strawberry paste, blackberry paste, carrot paste, peach paste, apricot paste etc.

Technical Explanation:

◆The sterilizer is composed of multi-pipe. Heat exchanger; Stepless speed change conveying pump, holder, closed water barrel, superheating water generator, frame, controller etc.

◆Includes heating section, sterilizing section. Tube group has the features of simple structure and small resistance.

[27]

◆With the flange isolates air protection, automatic and pneumatic control, the output and reflux is controlled by valves via thermal resistance and PLC. Capacity and lift of the cleaning pump is larger than the similar products. There is diversion device to enhance the heat transfer effect and also can avoid scaling inside the tube.

◆The heating-holding section has reasonable structure to guarantee the temperature stability and security of products

◆There is superheating water and cooling water channel during the cleaning which can avoid the scaling.

◆Adopting the method of superheating water heating to improve the heat effect.

◆automatic PLC system, multi-stage recorder to record important temperature.

◆Rotary pump with steeples speed regulation device;

◆High pressure piston pump with frequency conversion.

◆Superheating device

◆Steam and water mixing system

◆Temperature automatic control system

CIP device

◆Caustic soda and acid feeding tank,

Centrifugal pump is used for the circulation of cleaning liquor.

Frequency conversion is to control the cooling temperature of the material.

◆SIEMENS and OMRON electrical components, the PLC monitor can indicate every parameter directly to inspect it in time easily and guarantee the stability of running.

[28]

Technical parameter:

Product to be treated tomato paste Average working capacity 1500kg/h 3500x2500x260 Dimension 0mm Input temperature 60℃ Sterilizing temperature: 108~110℃ Outlet temperature for filling 35-38 ℃ Holding time 150s Power 19.5kw Steam consumption ~100kg/h

Working principle:

Pump the product from the buffer tank into the heat exchanger unit. Heat the product by superheated water till the sterilizing temp. and hold the product under the temp for sterilizing the product then go to filling.

After each production shift, clean in place the system with aseptic filler together by hot water, soda or acid. Features:

Main structure with SUS304 stainless steel

Combined Italian technology, Adopt mirror welding tech and keep the smooth pipe joint. Includes heating section, sterilizing section and holding section. simple structure and small resistance. the output and return is controlled by valves via

[29] thermal resistance and PLC. Capacity and head of the cleaning pump is big so can enhance the heat transfer effect and can avoid scaling inside the tube.

The heating holding section has reasonable structure to guarantee the temperature stability and security of products. Separate control panel, PLC and human machine interface. CIP and SIP available

Buffer tank

Capacity, 1000L

Material of tank AISI SS304/ 3A/ ISO, Polishing inside and

outside300# With stirrer and power 1.5kw

Have a electrode level sensor ABB connect to PLC

Have a product and water discharging pneumatic valve

And Dimensions, Ф1150X3500MM

CIP tank tank

Capacity, 350L

Material of tank AISI SS304/ 3A/ ISO

And Dimensions, Ф600mmX1000mm

Pneumatic diaphragm pump

Pump acid and soda from 100L soda tank.

Tri-piston Pump

Capacity: 1000L/h

Pressure: Max:200MPA

Work pressure: 0~160Mpa

[30]

No. of piston: 3 Power: 5.5kw Weight: 3500kg 1800x1200x130 Dimension: 0mm

Lobe Pump from the receiving tank to sterilizer

Lobe pump (Rotary pump) flow 1M3/H Variable frequency Power:1.5kw 8bar AISI SS304/ 3A/ISO, The pump is controlled by the PLC tubular superheating water generate system steam valves SPRAIX SARCO

Have a steam trap or Pump

The steam valve is controlled by the PLC

Tube-in-tube heat exchanger

Heating Section. Temperature the product in, 60℃

Temperature the product out, 90℃ Tubes in AISI SS304/ 3A/ ISO

Holding section. 15s

Key component:

PLC OMRON or best Chinese Brand

Touch screen OMRON or best Chinese Brand

Reducing valve VENN, JAPAN

Electric elements SIEMENS or best Chinese Brand

[31]

Requirements of workshop

Plant area not less than 800 square meter; net height not less than 4.8m; good ventilation available. The circumstance around the plant should be healthy to food. No other products threatening the food health produced in the same plant.

The producing area should be separated from the living area. Construction of the plant should be reasonably arranged. The plant should be of enough ventilation. Flat ground, no sweeper and main road should apply concrete, pitch and stones in avoidance of the flying dust. The drainage of industrial sewage should be in accordance with national environment protection requirements.

Washing water, washing facility, fly and bug defending fixture are available in the toilet. Besides, the wall of the toilet should be made of white ceramic tile. Keep the floor clean and sterilized. The rubbish and scrapes should be far away the processing plant and stacked up in whole. It should be cleaned up in time.

Treatment of workshop

Antisepsis and mold-proof treatment by ethoxyline. The draining gradient is 3~5%. Ceiling, wall and windows of the workshop should be painted with nontoxic gray dope, which is to be beneficial to clean and sterilize. Sufficient light, good ventilation, tidy and clean floor in the workshop.

Some facilities to sterilize, wash, defend fly and bug should be available.

Operation platform, utensil and dolly is matched with the production capacity and easy to clean, sterilize. Forbid utensil made of bamboo and wood. Bathroom, dressing room, toilet and lobby showable be connected with the workshop and matched with the number of worker. Automatic washing and sterilizing facilities available.

[32]

Water, electricity and steam supply Evaporator Capacity 5500kg/h

Power consumption 250kw/h

Circulation cooling Water for evaporator 200t/h

Worker required About 26works two shift

Plant Area ≧1500 ㎡

Steam consumption 4000kg/h

Employment Creation The project will employ a minimum of 1000 people over the period. -25% will be expatriates locals -70% indigenous Locals -5% foreign expatriates

Technology Transfer & Training of Local staff

The main idea of employing 5% expatriates i s to make sure the indigenous staff under-study them to take over hence the transfer of technology within a year after the completion of the power plants project

[33]

Manpower

2 person for put fresh tomato into receiving tank

6 person for sorter

1person for crusher and pulping machine

1 person for pre-heater

2 person for evaporator

1 person for sterilizer 2 person for pouch packaging machines

2 person as mechanical and repairman 1superivisor Above total about 17

people per shift 3 shift per 24hours

6 nonprofessional / laborers

6 health and inspector officers

3 security and safety officers 66 staffs at sites per day and 9 Admin

staffs for the whole 75staffs Over 1000 farm workers and out

growers

PROPOSED ESTIMATES The cost for the proposed projects of which includes; feasibility, design, procurement, construction of the structure, engineering, installation and commission: a) Municipal. Waste to energy $85,000,000.00 b) Tomato Processing line plant $20,000,000.00

[34]

REQUIRED FROM LOCAL PARTNERS

To be able to undertake the project as planned and expected, Local partners will be expected to assist, provide and deliver to Rook Industrial and Positive Limited and its partners:

1. adequate litigation-free land for the construction of the facilities

2. able to support to acquire EPA, Licenses, Permit from Gov’t to operate

3. a corporate guarantee that the facilities when completed will be at least 70% patronized our end product

4. Utilized the end power by Locals as well as gov’t through the PPA

PROPOSED SCHEDULES

1. Agreement between land owners, municipal Assemble, Associates with project owners scheduled 10th November 2017 2. Complete documentation stated above by 10th December 2017 3. Structure and civil works at site begins by 20th December 2017 4. Officially inauguration of the project December 2017 5. Construction of Tomatoes processing line facility commence Jan.-Feb. 2018 6. Tomatoes Out growers negotiations, registration, training and cultivation commence 20th Feb. 2018 to 15th March, 2018 7. Construction of Municipal waste to energy plant facility commence Feb. 25th 2018 to August 2018 8. Installations and engineering of tomato processing plant equipment ,April – May 2018 9. Harvest of tomato and Testing of equipment and production of tomato products, 28th May 2018 10. Inauguration, Commission and production, June 2018 11. Creation of awareness, registration and training of waste management services companies July-August 2018 12. Engineering, installation and training of local staff’s Sept. 2018 13. Inauguration, commission and production of MWTE power, oil/diesel, fertilize from the plant start October, 2018

These production factories are autonomous. Water and waste from the tomato processing line will be channel to the waste to energy as raw material to MWTE facility

[35]

Part of the power, biodiesel and fertilizer produce by the MWTE will be use by the tomato farms, factory and transportation. Then the ashes will be used for landfills

The project is in the process of qualifying for environmental and technology permits, EPA from the District Assemble. Securing feedstock from the ZOOMLION Gh Ltd. and power off-take commitments, from the Gov’t, as well as an agreement with the EPC contractor (Sierra Energy, USA)

CONTACT PERSON

Nana R. K. Osei Owusu MPM™, CIPM™ & CPE ™ (CEO ROOK Group) Hon. Global Advisor, (IPMC) Fellow,(AAPM) Tel;+233206367398 Whatsapp; 233542205583 Email; [email protected] [email protected]

Appreciation & Recognistion ; Rev. Dr Asante Antwi, Council of Elders, National NPP Nana S. Ofori Ampofo, Council of Elders Kade NPP ZOOMLION, Ghana ENERGY COMMISSION, Ghana SIERRA Energy , USA TRIOWIN OF CHINA CONVERSE ENERGY, Solutions to energy tomorrow, Sweden/Canada DISTRICT ASSEBLY, AWUTU SENYA YEBOAH TWIDAN FAMILY, AWUTU SENYA ROOK TEAM

[36]