DOCSLIB.ORG

'RAFOS Fish Tags' for Studying Fish Movement. ICES CM 2006/Q:16

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
'RAFOS Fish Tags' for Studying Fish Movement. ICES CM 2006/Q:16 INTERNATIONAL COUNCIL FOR THE ICES CM 2006/Q:16 EXPLORATION OF THE SEA Use of data storage tags to reveal aspects of fish behaviour important for fisheries management Development and Application of ‘RAFOS Fish Tags’ for Studying Fish Movement by Conrad W. Recksiek, Godi Fischer, H. Thomas Rossby, Steven X. Cadrin, and Prasan Kasturi Abstract The newly developed ‘RAFOS fish tag’ reverses the tracking process of conventional acoustic tags by receiving acoustic signals from moored sound sources, allowing triangulation of geographic position during deployment on fish. We report progress in developing this archival tag for geolocating juvenile and adult demersal shelf fishes. The tag and navigation system are similar in concept to those of isopycnal RAFOS floats, in which arrival times of low frequency tones broadcast from anchored sources are archived and later retrieved for retrospective positioning. The principal differences between the RAFOS fish tag and RAFOS floats is that the tag is small enough to be attached to or implanted in fish about 50 cm or larger, and the tags must be recovered from the tagged fish to download data. Prototype RAFOS fish tags are being deployed on adult yellowtail flounder, Limanda ferruginea, on Georges Bank to study movement in the vicinity of an offshore area that is closed to fishing. Deployment of sound sources will be on or along the edge of the continental shelf where detection ranges appear to be on the order of 100 to 120 km for sources generating a sound pressure of 180 dB re 1 μP. The size of the prototype is governed by dimensions of a cylindrical housing which functions as the hydrophone. Within this is a full-custom 0.5- μm feature size receiver chip, memory chip, timing crystal, two batteries, and pressure sensor (temperature sensor is on-chip). The receiver chip consumes 36 μW at 3 V with an expected data storage life of several months to two years. Keywords: acoustic positioning, acoustic tracking, archival tags, data storage tags, electronic tags, RAFOS fish tag, passive listening, retrospective positioning, yellowtail flounder Not to be cited without prior reference to the authors Conrad W. Recksiek: Fisheries, Animal, and Veterinary Science, Woodward Hall, University of Rhode Island, Kingston, RI 02881, USA [tel: +1 401-874-2334, fax: +401-874-6160, e-mail: [email protected]] Godi Fischer: Electrical and Computer Engineering, Kelly Hall, University of Rhode Island, University of Rhode Island, Kingston, RI 02881, USA [tel: +1 401-874-5879, fax: +1 401-782-6422, email: [email protected]] H. Thomas Rossby: Graduate School of Oceanography, University of Rhode Island, South Ferry Road, Narragansett RI 02882, USA [tel: +1 401-874-6521, fax: +1 401-874-6728, email: [email protected]] Steven X. Cadrin: NOAA/UMass CMER Director, School for Marine Science and Technology, 838 South Rodney French Boulevard, New Bedford, MA 02744-1221, USA [tel: +1 508-910-6358, fax: +1 508-910- 6396, email: [email protected]] Prasan Kasturi: Electrical and Computer Engineering, Kelly Hall, University of Rhode Island, University of Rhode Island, Kingston, RI 02881, USA [tel: +1 401-874-5861, fax: +1 401-782-6422, email: [email protected]. 0 Development and Application of ‘RAFOS Fish Tags’ for Studying Fish Movement Introduction We report progress in developing an archival tag capable of identifying sounds broadcast from distant, moored sources where the sounds’ arrival times are used for estimating a (tagged) fish’s position. The tag and sound source system we describe here is designed for geolocating juvenile and adult demersal shelf fishes; we hope to test the system on yellowtail flounder, Limanda ferruginea, of Georges Bank. The system concept could be applied to pelagic nekton offshore and into deep waters; and it could be used, within the physical constraints of the system, for retrospectively tracking most anything in the water column. General principles The technical approach builds on decades of research and development for tracking ocean currents (Rossby 2003) by means of subsurface drifters capable of broadcasting or receiving sound. Beginning in the 1950’s oceanographers used the deep sound or SOFAR (SOund Fixing And Ranging) channel to geolocate subsurface floats (Stommel 1955). Given the time of the float’s sound emission and the time of the emitted sound’s arrival, the float’s range may be estimated. A second receiver provides a fix. A ‘SOFAR float’ system is closely analogous to conventional systems for acoustically tracking aquatic animals, in which acoustic tags transmit to a receiving array (e.g., Urquhart and Smith 1992) or tracking vessel. In the early 1980s oceanographers reversed the tracking system concept by mooring the sound sources and letting the floats do the listening. This led to coining the word, RAFOS, SOFAR spelled backwards, to indicate the opposite direction of acoustic signaling (Rossby et al. 1986). The RAFOS tacking system has been applied extensively in oceanographic studies, e.g., Bower et al. 2002. The RAFOS system was designed for studying ocean currents by retrospective analysis of a listening/recording float’s archived sound source arrival time data. We have simply applied the same idea to studying fish movements, using ‘RAFOS fish tag’ to describe the system. The RAFOS sound source (Rossby 2003, Rossby et al. 1986) amounts to an aluminium, open, 35-cm diameter, 2-m pipe with a transducer inside and a power supply attached. For open ocean work the sources are typically deployed near where sound speed will be at a minimum, the SOFAR channel; in shallow waters at mid-depth. There is usually no surface marker; the float and mooring may be retrieved with an acoustic release or may simply be left where it is (because the cost of recovery exceeds the value of the source). Typically three sources are deployed. RAFOS sound sources, insonifying the deep ocean, may be detected at distances of one to two thousand kilometers, depending upon the sound channel characteristics. Where the thermocline is absent, such as in boreal oceans, minimum sound speed is at the surface. The RAFOS source emits a low frequency tone centered at 260 Hz, having a duration of 80 sec, on a predetermined schedule. For tracking RAFOS floats in the Gulf Stream, for 1 instance, tones would be broadcast twice daily. The tone, known to the community of oceanographers studying currents this way, is referred to as a pong. The tone changes frequency steadily, i.e., it sweeps, over its broadcast interval, viz., increasing from 259.375 to 260.898 Hz over 80 sec. The strength of the signal at 1 m is on the order of 180 dB re 1 μP. The motivation for ramping the frequency, or sweeping the frequency, is that such sound is unique in the ocean; the chance of confusing that pattern, i.e., a ramped, low-frequency sound, with ships and natural sounds, physical and biological, is minimal. The RAFOS float package (or hull) (Rossby 2003, Rossby et al. 1986) is a 15-cm diameter, 2-m PYREX glass pipe. It is ballasted to float vertically and is engineered to enable it to drift along isopycnal surfaces thereby tracking fluid motion (advection and diffusion) – hence the appellation isopycnal. By means of a hydrophone on the bottom end, the float listens and when the unique, ramped low-frequency signal is detected the arrival time is recorded. Knowing when the RAFOS source emits its tone, together with sound arrival time, yields a time difference between float and source; a range may be obtained given an appropriate speed of sound. With sound arrival times from a second source, a fix may be obtained (Figure 1). Note that if three or more signals are available, hyperbolic navigation may be employed to obtain a fix, since the locus of equal sound arrival time difference is a hyperbola (as with LORAN). Besides sound source arrival times, the float records ambient pressure and temperature. At the end of its mission, a ballast weight falls away, the float reaches the surface, and, through an antenna inside the glass pipe, its data are uploaded to an ARGOS satellite. The float track and temperature/pressure records are retrospectively derived from the data set recovered from ARGOS (see http://www.po.gso.uri.edu/rafos/ for additional details on RAFOS technology). The RAFOS fish tag system works the same way. The sound source side of the system is identical. The principal difference is that the tag is small enough to be attached to or implanted in fish about 50 cm or larger, and the tags must be recovered from the tagged fish to download data. The capability of breaking free from the fish at mission’s end is of course feasible but an antenna and RF system would make the device more costly and larger. The size of such a device, i.e., one capable of broadcasting radio frequencies at the surface, would be a function of the power needed to communicate with satellites. RAFOS fish tag system and operational environment A study of fish movements using RAFOS would be, on the ‘tagging side,’ approached and conducted like an archival tag study, e.g., Cadrin et al. 2005, Cadrin and Westwood 2004, NMFS 2005. The logistics amount to tagging and releasing animals and waiting for the fishery to return tags. Clearly, the closest operational environment to a RAFOS-based study of ocean currents would be a fish movement study on pelagic species of the deep sea. Indeed RAFOS technology may ultimately prove most fruitful there because physical oceanic gradients used to geolocate conventional archival tags can be very slight. Consequently we have 2 chosen to implement the prototype system on the continental shelf, on a flatfish species in particular – in our case Georges Bank yellowtail flounder (Figure 2).
Load more

Recommended publications
  • Instrumentation for Monitoring Around Marine Renewable Energy Converters: Workshop Final Report
    PNNL-23100 Prepared for the U.S. Department of Energy under Contract DE-AC05-76RL01830 Instrumentation for Monitoring around Marine Renewable Energy Converters: Workshop Final Report B Polagye A Copping R Suryan S Kramer J Brown-Saracino C Smith January 2014 PNNL-23100 Instrumentation for Monitoring around Marine Renewable Energy Converters: Workshop Final Report B Polagye1 A Copping R Suryan2 S Kramer3 J Brown-Saracino4 C Smith4 January 2014 Prepared for the U.S. Department of Energy under Contract DE-AC05-76RL01830 Pacific Northwest National Laboratory Richland, Washington 99352 1 University of Washington, Northwest National Marine Renewable Energy Center, Seattle, Washington 2 Oregon State University, Newport, Oregon 3 HT Harvey and Associates, Arcata, California 4 US Department of Energy, Wind and Waterpower Technologies Office, Washington, DC Recommended citation: Polagye, B., A. Copping, R. Suryan, S. Kramer, J. Brown-Saracino, and C. Smith. 2014. Instrumentation for Monitoring Around Marine Renewable Energy Converters: Workshop Final Report. PNNL-23110 Pacific Northwest National Laboratory, Seattle, Washington. Summary As the marine energy industry explores the potential for generating significant power from waves and tidal currents, there is a need to ensure that energy converters do not cause harm to the marine environment, including marine animals that may interact with these new technologies in their native habitats. The challenge of deploying, operating, and maintaining marine energy converters in the ocean is coupled with the difficulty of monitoring for potentially deleterious outcomes between the converters, anchors, mooring lines, power cables and other gear, and marine mammals, sea turtles, fish, and seabirds. To better understand the state of instrumentation and capabilities for monitoring around marine energy converters, the U.S.
    [Show full text]
  • Prestudy on Sonar Transponder
    Prestudy on Sonar Transponder Dag Lindahl & Leigh Boyd, Avalon Innovation September 2018, Västerås, Sweden External consultant: Avalon Innovation AB Dag Lindahl, Business Manager Project North, +4670 454 37 08, [email protected] Leigh Boyd, System Development Engineer +4670 454 43 44, [email protected] Avalon Innovation AB, Skivfilargränd 2 721 30 Västerås, Sweden Org nr: 556546-4525, www.avaloninnovation.com Contractor Marine Center, Municipality of Simrishamn Coordination and editing Vesa Tschernij, Marine Center MARELITT Baltic Lead Partner Municipality of Simrishamn Marine Center, 272 80 Simrishamn, Sweden Contact Vesa Tschernij, Project Leader [email protected] +4673-433 82 87 www.marelittbaltic.eu The project is co-financed by the Interreg Baltic Sea Region Programme 2014-2020. The information and views set out in this report are those of the authors only and do not reflect the official opinion of the INTERREG BSR Programme, nor do they commit the Programme in any way. Cover photo: P-Dyk Table of Contents Introduction 1 Background 3 Sonars and fish finders 3 Active - Beacons 4 Active - Transponders 5 Passive - Reflectors 5 Transmitter power and frequencies 6 Chirp vs. Ping 7 Beam characteristics 7 Propagation in water 7 Returned signal from underwater targets 8 Receiver sensitivity 9 Link- and power budget calculations 9 Transmitter output power 9 Transmitter output efficiency 10 Transmitter lobe directivity and spreading losses. 10 Propagation loss through water to target (and back) 10 Noise 10 Ideas 11 Resonators as energy storage elements or harvesters 11 Conclusions 12 Recommendations for further work 13 Ghost Net Hotline 13 Transponders - to help retrieve nets lost in the future 13 Improving the Sonar Data at the source 14 Computerized Post Processing 14 Map/Database 15 Dispatching algorithm 15 Remotely Operated Vehicles 16 References 17 Introduction Avalon Innovation has been asked to investigate the potential for making a sonar responder, driven by the energy in the sonar pulse.
    [Show full text]
  • A Review and Inventory of Fixed Autonomous Recorders for Passive Acoustic Monitoring of Marine Mammals Renata S
    Aquatic Mammals 2013, 39(1), 23-53, DOI 10.1578/AM.39.1.2013.23 A Review and Inventory of Fixed Autonomous Recorders for Passive Acoustic Monitoring of Marine Mammals Renata S. Sousa-Lima,1, 2, 5 Thomas F. Norris,3 Julie N. Oswald,3, 4 and Deborah P. Fernandes5 1Bioacoustics Research Program, Cornell Lab of Ornithology, 159 Sapsucker Woods Road, Ithaca, NY 14850, USA E-mail: [email protected] 2Programa de Pós-Graduação em Ecologia, Conservação e Manejo de Vida Silvestre, Instituto de Ciências Biológicas, Universidade Federal de Minas Gerais, Avenida Antônio Carlos 6627, Belo Horizonte, MG 31270, Brasil 3Bio-Waves, Inc., 144 W. D Street, Suite #205, Encinitas, CA 92024, USA 4Oceanwide Science Institute, PO Box 61692, Honolulu, HI 96839, USA 5Laboratório de Bioacústica e Programa de Pós Graduação em Psicobiologia, Departamento de Fisiologia, Centro de Biociências, Universidade Federal do Rio Grande do Norte, Caixa Postal 1511, Campus Universitário, Natal, RN 59078-970, Brasil Abstract sounds produced by marine mammals to more effectively study them. Fixed autonomous acoustic recording devices In 1880, Pierre and Jacques Curie (1880a, (autonomous recorders [ARs]) are defined as 1880b) discovered that when mechanical pressure any electronic recording system that acquires was exerted on a quartz crystal, an electric poten- and stores acoustic data internally (i.e., without a tial is produced. This finding enabled the devel- cable or radio link to transmit data to a receiving opment of the first device capable of listening to station), is deployed semi-permanently underwa- sounds underwater—passive acoustic monitoring ter (via a mooring, buoy, or attached to the sea (PAM), which was utilized during World War I.
    [Show full text]
  • Yet2 – NOAA Buoyless Gear Location Marking Pivot Report
    NOAA Topic Specific Scouting yet2 Buoyless Gear Location Marking Project Pivot Report October 21, 2020 Contents • Executive Summary • Description of Targets • Appendices 2 Executive Summary Project Objective • Identification of technologies/companies that have the potential/expertise to develop and commercialize a Buoyless Underwater Object Location Marking System. • Assessment of the most promising potential solution providers and interviews with potential partners. Results to Date • yet2 has sent 41 relevant targets to NOAA to be reviewed. o Looked at Ropeless Fishing Systems, commercially available technologies/systems and novel academic research of Underwater Communication, Positioning, and Networking systems, and its individual components. o Reviewed acoustic, optical, and electromagnetic systems, novel methods, modems, and power transfer techniques. • NOAA reviewed and provided feedback on all 41 targets and has identified 39 companies with relevant expertise developing and commercializing underwater Communication & Positioning Systems. • Important results to date: o NOAA contacted and invited all in scope and relevant targets to the Ropeless Consortium Annual meeting. o yet2 gained insights on the state of the art of Underwater Communication And Location Systems to inform NOAA, who will use this information to work on the specifications for a Bouyless Gear Location Marking System. 3 General Observations and Next Steps General Observations Pricing While there are many companies with capabilities and existing products around NOAA’s desired system, most are not within the desired cost range. • A traditional system for monitoring high-value assets such as underwater autonomous vehicles, cost upwards of $15,000. • Some researchers have built low cost devices ($100-1000) from raw materials, but it does not appear that these devices are being manufactured on a commercial scale.
    [Show full text]
  • Research Article Nonstationary System Analysis Methods for Underwater Acoustic Communications
    Hindawi Publishing Corporation EURASIP Journal on Advances in Signal Processing Volume 2011, Article ID 807472, 14 pages doi:10.1155/2011/807472 Research Article Nonstationary System Analysis Methods for Underwater Acoustic Communications Nicolas F. Josso,1 Jun Jason Zhang,2 Antonia Papandreou-Suppappola,2 Cornel Ioana,1 and Tolga M. Duman2 1 GIPSA-Lab/DIS, Grenoble Institute of Technology (GIT), 38402 Grenoble, France 2 School of Electrical, Computer and Energy Engineering, Arizona State University, Tempe, AZ 85287-9309, USA Correspondence should be addressed to Antonia Papandreou-Suppappola, [email protected] Received 3 August 2010; Accepted 26 December 2010 Academic Editor: Antonio Napolitano Copyright © 2011 Nicolas F. Josso et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. The underwater environment can be considered a system with time-varying impulse response, causing time-dependent spectral changes to a transmitted acoustic signal. This is the result of the interaction of the signal with the water column and ocean boundaries or the presence of fast moving object scatterers in the ocean. In underwater acoustic communications using medium- to-high frequencies (0.3–20 kHz), the nonstationary transformation on the transmitted signals can be modeled as multiple time- delay and Doppler-scaling paths. When estimating the channel, a higher processing performance is thus expected if the techniques used employ a matched channel model compared to those that only compensate for wideband effects. Following a matched linear time-varying wideband system representation, we propose two different methods for estimating the underwater acoustic communication environment.
    [Show full text]
  • 3 Affected Environment and Environmental Consequences
    Atlantic Fleet Training and Testing Draft EIS/OEIS June 2017 Draft Environmental Impact Statement/Overseas Environmental Impact Statement Atlantic Fleet Training and Testing TABLE OF CONTENTS 3 AFFECTED ENVIRONMENT AND ENVIRONMENTAL CONSEQUENCES ....................................... 3.0-1 3.0 Introduction ........................................................................................................... 3.0-1 3.0.1 Navy Compiled and Generated Data .................................................................. 3.0-1 3.0.1.1 Marine Species Monitoring and Research Programs ......................... 3.0-1 3.0.1.2 Marine Species Density Database....................................................... 3.0-2 3.0.1.3 Developing Acoustic and Explosive Criteria and Thresholds .............. 3.0-3 3.0.1.4 Aquatic Habitats Database ................................................................. 3.0-4 3.0.2 Ecological Characterization of the Study Area .................................................... 3.0-4 3.0.2.1 Biogeographic Classifications.............................................................. 3.0-4 3.0.2.2 Bathymetry ....................................................................................... 3.0-12 3.0.2.3 Currents, Circulation Patterns, and Water Masses .......................... 3.0-14 3.0.2.4 Ocean Fronts ..................................................................................... 3.0-27 3.0.2.5 Abiotic Substrate .............................................................................. 3.0-27
    [Show full text]
  • Long-Term Autonomous Hydrophones for Large-Scale Hydroacoustic Monitoring of the Oceans Jean-François D’Eu, Jean-Yves Royer, Julie Perrot
    Long-term autonomous hydrophones for large-scale hydroacoustic monitoring of the oceans Jean-François d’Eu, Jean-Yves Royer, Julie Perrot To cite this version: Jean-François d’Eu, Jean-Yves Royer, Julie Perrot. Long-term autonomous hydrophones for large- scale hydroacoustic monitoring of the oceans. Yeosu 2012, May 2012, Yeosu, North Korea. pp.1-6, 10.1109/OCEANS-Yeosu.2012.6263519. insu-00817948 HAL Id: insu-00817948 https://hal-insu.archives-ouvertes.fr/insu-00817948 Submitted on 22 May 2019 HAL is a multi-disciplinary open access L’archive ouverte pluridisciplinaire HAL, est archive for the deposit and dissemination of sci- destinée au dépôt et à la diffusion de documents entific research documents, whether they are pub- scientifiques de niveau recherche, publiés ou non, lished or not. The documents may come from émanant des établissements d’enseignement et de teaching and research institutions in France or recherche français ou étrangers, des laboratoires abroad, or from public or private research centers. publics ou privés. Long-term autonomous hydrophones for large-scale hydroacoustic monitoring of the oceans Jean-François D’Eu, Jean-Yves Royer, Julie Perrot Laboratoire Domaines Océaniques CNRS and University of Brest Plouzané, France [email protected] Abstract—We have developed a set of long-term autonomous hydrophones dedicated to long-term monitoring of low-frequency A. Monitoring ocean seismicity at a broad scale sounds in the ocean (<120Hz). Deploying arrays of such Seismicity in the ocean is usually recorded with the help of hydrophones (at least 4 instruments) proves a very efficient seismometers, such as Ocean Bottom Seismometers (OBS), approach to monitor acoustic events of geological origin placed in the proximity of active areas.
    [Show full text]
  • Passive Acoustic Monitoring Projects and Sound Sources in the Gulf of Mexico
    OCS Study BOEM 2020-009 Literature Synthesis: Passive Acoustic Monitoring Projects and Sound Sources in the Gulf of Mexico U.S. Department of the Interior Bureau of Ocean Energy Management New Orleans Office OCS Study BOEM 2020-009 Literature Synthesis: Passive Acoustic Monitoring Projects and Sounds Sources in the Gulf of Mexico Authors Jennifer N. Latusek-Nabholz Amy D. Whitt Dagmar Fertl Dennis R. Gallien Anwar A. Khan Natalia Sidorovskaia Prepared under BOEM Contract M17PC00001 by HDR, Inc. 300 N. Madison Street Athens, Georgia 35611 Published by U.S. Department of the Interior New Orleans, LA Bureau of Ocean Energy Management January 2020 New Orleans Office DISCLAIMER Study concept, oversight, and funding were provided by the US Department of the Interior, Bureau of Ocean Energy Management, Environmental Studies Program, Washington, DC, under Contract Number M17PC00001, Task Order No. M17PD00011. This report has been technically reviewed by BOEM, and it has been approved for publication. The views and conclusions contained in this document are those of the authors and should not be interpreted as representing the opinions or policies of the U.S. government, nor does mention of trade names or commercial products constitute endorsement or recommendation for use. REPORT AVAILABILITY To download a PDF file of this report, go to the US Department of the Interior, Bureau of Ocean Energy Management Data and Information Systems webpage (http://www.boem.gov/Environmental-Studies- EnvData/), click on the link for the Environmental Studies Program Information System (ESPIS), and search on 2020-009. The report is also available at the National Technical Reports Library at https://ntrl.ntis.gov/NTRL/.
    [Show full text]
  • DELIVERABLE 2.1 Monitoring Plans for Noise, Electromagnetic Fields and Seabed Integrity
    WAVE ENERGY IN SOUTHERN EUROPE | Deliverable 2.1. Monitoring plans for Noise, Electromagnetic Fields and Seabed Integrity DELIVERABLE 2.1 Monitoring plans for Noise, Electromagnetic Fields and Seabed Integrity 1 WAVE ENERGY IN SOUTHERN EUROPE | Deliverable 2.1. Monitoring plans for Noise, Electromagnetic Fields and Seabed Integrity 2 WAVE ENERGY IN SOUTHERN EUROPE | Deliverable 2.1. Monitoring plans for Noise, Electromagnetic Fields and Seabed Integrity WP 2 Environmental Monitoring Deliverable 2.1 Monitoring plans for Noise, Electromagnetic Fields and Seabed Integrity PROJECT COORDINATOR AZTI TASK LEADER AZTI AUTHORS Pedro Vinagre, WavEC Erica Cruz, WavEC Paulo Chainho, WavEC Pablo Ruiz, CTN Ivan Felis, CTN Iñigo Muxika, AZTI Juan Bald, AZTI SUBMISSION DATE 28 | February| 2019 CITATION Vinagre P.A., Cruz E., Chainho P., Ruiz P., Felis I., Muxika I., Bald J., 2019. Deliverable 2.1 Monitoring plans for Noise, Electromagnetic Fields and Seabed Integrity. Corporate deliverable of the Wave Energy in the Southern Europe (WESE) Project funded by the European Commission. Agreement number EASME/EMFF/2017/1.2.1.1/02/SI2.787640. 60 pp. 3 WAVE ENERGY IN SOUTHERN EUROPE | Deliverable 2.1. Monitoring plans for Noise, Electromagnetic Fields and Seabed Integrity WESE Wave Energy in the Southern Europe D2.1 Monitoring plans for Noise, Electromagnetic Fields and Seabed Integrity 4 WAVE ENERGY IN SOUTHERN EUROPE | Deliverable 2.1. Monitoring plans for Noise, Electromagnetic Fields and Seabed Integrity CONTENTS 1. WESE PROJECT SYNOPSIS ......................................................................................................................
    [Show full text]
  • Report of the NABOS/CABOS 2010-2011 Arctic Ocean Mooring Recovery
    IARC Technical Report # 8 Report of the NABOS/CABOS 2010-2011 Arctic Ocean mooring recovery Summary of NABOS/CABOS mooring operations With support from: NSF 1 TABLE OF CONTENTS PREFACE ( I.Polyalov )…….………………………………..………………………..….………....... 5 I. NABOS MOORING RECOVERY DURING ICE CRUISE 2010, R/V LANCE …………….……… 7 I.1. INTRODUCTION (I.Polyakov)………………………………………..…………………………… 8 I.2. RESEARCH VESSEL …………..………………………………………………………….......... 8 I.3. OUTLINE FOR MOORING OPERATIONS ……………..……….................................................. 9 I.3.1. Attempt to recover SAMS mooring (I. Waddington) ....………………………………………….… 9 I.3.2. Recovery of M4c mooring (I. Waddington)……………………………………………………. 11 I.3.3. Downloading M4c mooring data (I. Waddington)………………………………………………………... 14 I.3.4. Preliminary look at M4c mooring data …............................................................................. 14 I.4. ACKNOWLEDGEMENTS ……………..………........................................................................... 16 II. NABOS MOORINGS RECOVERY DURING ARK-XXVI/3 CRUISE 2011, R/V POLARSTERN 19 II.1. INTRODUCTION (I.Polyakov)……………………………………..…..………………………… 20 II.2. RESEARCH VESSEL ………..……………………………………..…………………….......... 21 II.3. OUTLINE FOR MOORING OPERATIONS …………..………..................................................... 21 II.3.1. M11a mooring ....………………………………………………..…………………………….… 21 II.3.1.1. Recovery of M11a mooring (I. Waddington)……………………….…………………… 21 II.3.1.2. Preliminary look at M11a mooring data ….............................................................. 24
    [Show full text]
  • Damocle Ss D8.2-06
    Project no. 018509 DAMOCLES Developing Arctic Modelling and Observing Capabilities for Long-term Environment Studies Instrument: Integrated Project Thematic Priority: 6.3 “Global Change and Ecosystems” D8.2-06 - Results from the Fram Strait acoustic tomography experiment and system evaluation Due date of deliverable: 30/05/2010 Actual submission date: 20/06/2010 Used Person/months: 9.75 Start date of project: 1 December 2005 Duration: 54 months Organisation name of lead contractor for this deliverable: NERSC Project co-funded by the European Commission within the Sixth Framework Programme (2002-2006) Dissemination Level PU Public PP Restricted to other programme participants (including the Commission Services) X RE Restricted to a group specified by the consortium (including the Commission Services) CO Confidential, only for members of the consortium (including the Commission Services) D8.2-06 - Results from the Fram Strait acoustic tomography experiment and system evaluation TITLE: D8.2-06 - Results from the Fram Strait acoustic REPORT IDENTIFICATION tomography experiment and system evaluation DAMOCLES Deliverable D8.2 CLIENT : CONTRACT DAMOCLES Contract Instrument: Integrated Project Grant agreement no.: 018509 Thematic Priority: 6.3 “Global Change and Ecosystems” CLIENT REFERENCE AVAILABILITY Open report within the DAMOCLES consortium. INVESTIGATORS AUTHORISATION Svein Arild Haugen, NERSC, Norway Hanne Sagen, NERSC, Norway Stein Sandven, NERSC, Norway Bergen, 20 June 2010 Matthew Dzieciuch, SIO, USA Peter Worcester, SIO, USA Emmanuel
    [Show full text]
  • A Vector Sensor-Based Acoustic Characterization System for Marine Renewable Energy
    Journal of Marine Science and Engineering Article A Vector Sensor-Based Acoustic Characterization System for Marine Renewable Energy Kaustubha Raghukumar *, Grace Chang , Frank Spada and Craig Jones Integral Consulting Inc, Santa Cruz, CA 95062, USA; [email protected] (G.C.); [email protected] (F.S.); [email protected] (C.J.) * Correspondence: [email protected]; Tel.: +1-831 466 9630 Received: 9 January 2020; Accepted: 6 March 2020; Published: 10 March 2020 Abstract: NoiseSpotter is a passive acoustic monitoring system that characterizes, classifies, and geo-locates anthropogenic and natural sounds in near real time. It was developed with the primary goal of supporting the evaluation of potential acoustic effects of offshore renewable energy projects. The system consists of a compact array of three acoustic vector sensors, which measures acoustic pressure and the three-dimensional particle velocity vector associated with the propagation of an acoustic wave, thereby inherently providing bearing information to an underwater source of sound. By utilizing an array of three vector sensors, the application of beamforming techniques can provide sound source localization, allowing for characterization of the acoustic signature of specific underwater acoustic sources. Here, performance characteristics of the system are presented, using data from controlled acoustic transmissions in a quiet environment and ambient noise measurements in an energetic tidal channel in the presence of non-acoustic flow noise. Data quality is demonstrated by the ability to reduce non-acoustic flow noise contamination, while system utility is shown by the ability to characterize and localize sources of sound in the underwater environment. Keywords: marine renewable energy; acoustics; environmental characterization 1.
    [Show full text]