RReessccuuee eqequuipmenipmentt

08 Kap. 08-02 12.04.2005 14:03 Uhr Seite 4

Ladder Guide ears More than you might expect. 15 Y of Quality Guarantee Quality and Safety for You!

NEW!

www.steigtechnik.de Kap. 08-03 12.04.2005 14:06 Uhr Seite 3

PORTABLE LADDERS

Hook ladder EN 1147 * 55829 55831 4.4 m long, with hinged saw-toothed hook of steel with spring lock. 10 rungs, 3 hook rungs and one head rung of knotless ashwood. Side rails of knotless Oregon pine. All fixtures are galvanized. Weight: 13 kg ...... 55813

Hook ladder EN 1147 * as art. No. 55813 above but of light metal. Weight: 11.5 kg ...... 55833

Scaling ladder, upper section Ladder insert EN 1147 55920 EN 1147, 2.7 m, 7 rungs * with 2 rungs, for use as complement (Formerly ladder part B.) to the scaling ladder sections to Light metal, rungs covered with heat- overcome the large distance between insulating and slip-proof matting. the ground and the bottom rung. The nonskid profiled shoes are Dim. (LxW): 780x400 mm exchangeable. Fixtures of light metal, spring bolts of steel. Ladder insert EN 1147 Weight: 9.8 kg of wood * ...... 55828 Weight: 4 kg ...... 55830 Scaling ladder, upper section EN 1147, 2.7 m, 7 rungs * Ladder insert EN 1147 (Formerly ladder part B.) of light metal Side rails of knotless Oregon pine, Weight: 3 kg rungs of knotless ashwood, ...... 55831 impregnated and varnished. With Multifunctional ladder box-type brackets for putting the Complying with draft DIN EN 1147, 55832 ladders together and spring strain supplement 1. bolts for secure arrest. All fixtures of In 3 parts, 2-person ladder. Multi- galvanized steel. functional use as standing ladder (also Weight: 14 kg in connection with rescue platform), 08 ...... 55838 lean-on ladder, roof ladder, hanging ladder. 2 multifunctional ladders can Scaling ladder, lower section (A) be connected. Ladder length as lean- 2.7 m, 9 rungs on ladder 6 m. Tested in compliance of light metal with DIN EN 1147. Weight: 10 kg Weight: 25 kg ...... 55829 ...... 55920

of wood * Folding ladder EN 1147 * Weight: 14 kg 3 m long, 9 rungs of knotless ...... 55837 ashwood, side rails of knotless Oregon Scaling ladder connection part pine, impregnated and varnished. Rubber shoe for building a double ladder of 2 or 4 Drive-in end metal fittings. for fire service scaling ladder * scaling ladder sections in order to Fixtures of galvanized steel...... 55840 overcome barriers such as fences and Weight: 11.5 kg for building a temporary hose bridge...... 55841 Rung matting exchange set * Dim. (LxWxH): 500x470x180 mm for scaling and extension ladders of Weight: 4 kg light metal...... 55832 Please note that all dimensions and ...... 55950 weights noted in our catalogue are approximate values.

For orders please contact our local agent. Some articles may not be available in * = not illustrated specific countries. Details on request. 3 Kap. 08-04 12.04.2005 14:05 Uhr Seite 4

PORTABLE LADDERS

55943 56350 55944

Extension ladder of light metal, Testing unit for ladders Rope ladder Kletter-Fix, 3 sections, EN 1147 and DIN 14715-2 consisting of 5 girders, drawgear incl. patent No. DBP P 3118322.0-09 with (double) cable line with tumbling winch, 2 movable trestles, rigid trestle The unique, collapsible rescue ladder hook, with stay poles. Extended length with clamping device, traction dyna- for all rescue organisations, schools, 14 m, retracted 5.4 m. Side rails and mometer. hotels etc. Unlike conventional rope rungs of aluminium profiles, rungs with Weight: 150 kg ladders this one is maintenance-free, slip-proof, heat insulating synthetic ...... 55944 weather-resisting and fire-proof. The matting. 2 rollers at the top, steel pikes side cables are of galvanized wire rope on the heels. Poles of aluminium pipes. Rope ladder * and the slip-proof rungs of aluminium. Complete with ladder cable brake. On both sides with sisal ropes Max. load 300 kg. The ladder easily Weight: 71 kg Ø 16 mm, with 3 ashwood rungs per folds into a small, compact, light- ...... 55943 meter Ø 30 mm, length of rungs weight pack. The patented folding 45 cm, distance between rungs 30 cm. method ensures perfect function in Polyester cable for extension ladder Without snap hooks. When ordering case of emergency. Approved by the of light metal * please state length. German test code association (TÜV Cable for 3-section light metal ...... 55941 and GS), type of approval ZH 1368. extension ladder, helical braiding, white, Ø 14 mm, DIN 14715. Snap hook, DIN 7472, Kletter-Fix Kompakt-N5 Total length: 15 m 1 pair * 5 m for 2 storeys...... 55930 Light metal, with lock nut A DIN 5290 Dim. folded (LxWxH): 33x20x10 cm and closed ring, for art. No. 55941. Weight: 3.2 kg 08 ...... 54462 ...... 56350 55940 Kletter-Fix Kompakt-N8 * 8 m for 3 storeys. Dim. folded (LxWxH): 33x20x10 cm Weight: 4.5 kg ...... 56351

Kletter-Fix Kompakt-N12 * 12 m for 4 storeys. Dim. folded (LxWxH): 33x20x10 cm Weight: 6.9 kg ...... 56352

Kletter-Fix wall anchor * Galvanized, with dowels and screws Cable brake for fixed installation. for retrofitting. For 3-section extension Weight: 0.25 kg ladder of light metal...... 56356 Weight: 0.5 kg ...... 55940 Kletter-Fix spacer * to be squeezed in between ladder and wall. Weight: 0.25 kg ...... 56357

Some articles may not be available in * = not illustrated 4 specific countries. Details on request. Kap. 08-05 12.04.2005 14:04 Uhr Seite 5

RESCUE AND WORKING EQUIPMENT

Rollgliss aluminium tripod Tripod of aluminium * 51940 incl. carrying bag. 8-fold adjustment of EN 795, approved for 2 persons, for each leg. Approved for 2 persons in work in pits and ducts, with carrying compliance with EN 795. bag. Load 1000 kg, working height Weight: 15 kg extended 2.5 m, adjustable legs...... 56291 Dimensions (folded in protective cover): 1660x210x200 mm Rollgliss hand winch Weight: 13 kg EN 1496, to be secured to the tripod...... 56597 Can be used with R 350 only. Weight: 4 kg 51949 ...... 56290

51930

Tackle, set of equipment consisting of: 51959 Carrying bag Dry-Pack 51941 Sheathed static core rope 65 m 51932 Band sling 0.8 m long 51953 2 band slings at 1.5 m 51954 3 snap hooks HMS 51942 5 snap hooks with screw lock 51943 2 rope pulleys 51944 2 whirls 51945 Rope clip Fall protection complying with FwDV 51946 Back stop 1/2, set of standard equipment 51950 Catching harness DIN EN 361 consisting of: ...... 51940 Fall protection, set of equipment 51950 Catching harness DIN EN 361 consisting of: 51951 Sheathed dynamic core rope 51959 Carrying bag Dry-Pack 60 m long 56305 51950 Catching harness DIN EN 361 51952 8 band slings at 0.6 m 56291 51951 Sheathed dyn. core rope 60 m 51953 2 band slings at 1.5 m 56290 51932 10 band slings at 0.8 m 51954 13 snap hooks HMS 51933 2 band slings at 1.2 m ...... 51949 51954 12 snap hooks HMS 51934 Redundancy snap hooks Catching harness DIN EN 361 * 08 51935 2 pairs of protective gloves Universal standard harness, adjustable 51936 Self locking device to the user’s size. Harness straps of 56307 Rescue triangle EN 1498 polyester, width 45 mm. With catching 51937 Steel snap hook loops at the shoulders and two 51933 Band sling 1.2 m long securing loops at the sides. 51938 13 edge protection pieces ...... 56480 ...... 51930 Catching harness DIN EN 361 * Rollgliss TOP/R 350 ST with size D ring catching loop in the Rollgliss TOP/R 350 descent control Safety and rescue system * back and 2 front belt loops as catching Complying with EN 341-A/EN 1496-B, Standard version CE EN 341-A/EN loops. consisting of: Rollgliss, pulley fixed 1496. Basic system consisting of: ...... 51950 (3:1), pulley loose with 2 holes (3:1), Rollgliss, anchor point fixed (2:1), 30 m of Flex-Static core rope Ø 9 mm, pulley loose 1 hole (2:1), 3 snap hooks, Sheathed dynamic core rope 60 m * 3 snap hooks, rope control device, sheathed core rope 60 m, Ø 9 mm, EN 892, Ø 10.5 mm, impact force catching harness EN 361, box of rope control device with brake, ≤ 9 kN, falls held ≥ 14 norm drops, aluminium size 2. 2 snap hooks (CE stand. EN 362), tensile strength ≥ 22 kN, easy to knot, Weight: 8.5 kg safety cable 1 m (CE stand. EN 354), do not easily twist, red...... 56305 2 thimbles, rescue seat harness, 4 size ...... 51951 D lugs (EN 1498-B), seat harness with safety cable of 2 m, 2 snap hooks, 1 m sheathed steel cable, 2 thimbles (CE standard EN 795-B), operating Firemen’s safety belts are found in instructions R 350, compl. in PVC bag. chapter 11 ”Firemen’s clothing and Weight: 9.8 kg ...... 56292 individual equipment” !

* = not illustrated Some articles may not be available in specific countries. Details on request. 5 Kap. 08-06 (Konvertiert)-1 12.04.2005 15:42 Uhr Seite 1

InflaInflatatableble emeremergengencycy equipmentequipment

SEZ and SEZ-Maxi: Tw o persons can easily carry and quickly erect/take down the tent

Various emergency equipment: Emergency tents SEZ and SEZ-Maxi, emergency shower SE-Dusch and emergency jumping Variations: cushion (SEP). Small sizes Various elements for important tasks. can be practically combined, e.g. for initial cleaning and decontamination in a haz-mat accident. Each piece of equipment is ready for use within max. 40 sec.!

60

50 10

Jumping cushion: Well-known and well-proven. 40 20

30 D SB Kap. 08-07 12.04.2005 14:10 Uhr Seite 7

JUMPING EQUIPMENT AND ACCESSORIES

Jumping cushion type 10, 56140 56122 system ”Lorsbach” DIN 14151-3, approval No. Fw Bln. III - 1/92. Dim. (LxWxH): erected: 3500x3500x1700 mm packed: 900x550x300 mm Weight: 55 kg (incl. air cylinder) ...... 56140

Jumping cushion type 10, system ”Lorsbach” * as art. No. 56140 above but without air cylinder. Weight: 45 kg ...... 56139 Jumping cushion, Jumping sheet ST-S system ”Lorsbach” Jumping cushion type 10, size 2, DIN 14151-2, approval No. Fw Bln. III - The only jumping cushion complying system ”Lorsbach” * 1/8/83, of linen canvas, octagon. with DIN 14151-1-3 that is approved Dim. (LxWxH): Strong straps with circumferential grab for the fire service. erected: 4500x4500x2300 mm rope of Ø 20 mm. Parallel grab ropes (incl. air cylinder 8 l/300 bar) on two sides for reduction of the The jumping cushion consists of an Further data on request. landing area to 3x3 m. inflatable hose frame that is enclosed ...... 56137 Landing area: 3.5x3.5 m on all sides by an airtight and not Weight: 29 kg easily inflammable tarpaulin. The Manometer * ...... 56122 inflatable frame comprises two square- for jumping cushion, with approx. 1 m shaped hose frames interconnected by transparent PVC-hose, for checking DIN 14151-3, para 9 states that for four vertical hose columns. A horizon- the pressure in the hose frame. training purpose a dummy or sand- tal partition divides the cushion into an ...... 56444 bag of 50 kg must be used. Height of upper and a lower chamber. An drop max. 12 m. adaptor for connecting a breathing air High pressure hose * cylinder 6 l/300 bar is provided at the for jumping cushion, without adaptor, Dummy ”Rescue Randy” lower hose frame. for air cylinder. Made of a steel frame with a cast of Two persons only are needed for Length: 200 mm rugged plastic skin. All joints of the erecting and taking down the jumping ...... 56452 model are movable. cushion. The cushion reerects auto- Weight: 50 kg matically within approx. 10 seconds Repair kit * ...... 56121 08 after a jump and is then ready for for jumping cushion, consisting of: another jumping person. packing bag, 56121 2 patches of PVC tarpaulin material Please note: (orange), 130x130 mm, Ladders are normally used for the 4 Tip-Top patches Ø 80 mm, rescue of persons from great heights. tube of Gi-adhesive Tip-Top (50 g), Only in cases when this is not possible can of PVC-adhesive (80 g), tool jumping cushions and life nets are ...... 56129 used. Whenever these jumping devices are used, injuries cannot Jumping sheet ST-PES * generally be avoided. DIN 14151-2, approval No. Fw Bln. III - 1/91, of branded polyester material, octagon. With high-strength polyester Training and demonstration jumps straps of 60 mm width and with are forbidden! circumferential grab rope Ø 20 mm. Parallel grab ropes on two sides for reduction of the landing area to 3x3 m. Certain parts are needed for the Landing area: 3.5x3.5 m Dummy ”Rescue Randy” * inspection of jumping cushions. Weight: 18 kg as art. No. 56121, but: Please contact us for an offer...... 56126 Weight: 75 kg ...... 56123

* = not illustrated Some articles may not be available in specific countries. Details on request. 7 Kap. 08-08 12.04.2005 14:10 Uhr Seite 8

EMERGENCY TENTS

56130 56130 56336 56134 56135

ZIEGLER emergency tents The ZIEGLER emergency tent consists ZIEGLER emergency tent Compact, easy-to-handle, high- of an inflatable hose frame that is ”Maxi” 4x5 m quality, multi-purpose tents especially covered with a water-proof Supratex (Width 5 m), of polyamide, coated with designed for the fire services and material. The floor is secured by polychlorbutadiene. Tent material of rescue organisations. means of velcro fastener and is easy Supratex, outside colour red. Version to remove. A large opening on the with one window, inscription sheet, Deciding factors that count when front side with heavy-duty zippers. anchoring ropes on the ridge and on rapidity is required: By means of these zippers it is the side hose frame, removable floor •quick set-up by 2 persons in max. possible to connect two tents and tarpaulin of grey PVC-coated material. 40 seconds thus double the volume. 8 ground 2 ventilation openings in the ridge of •low weight (approx. 55 and 57 kg straps and 10 guy ropes ensure safe the roof, opening for heating hose and respectively incl. breathing air anchoring even in strong wind. electric cables, incl. trimmings for cylinder) Opening for heating hose and electric heating hose and fixing devices for •small packing dimensions, large cables. Inside the tent there are straps partitions, lamps etc. With 6 l/300 bar volume with eyelets for hooking up tarpaulins standard air cylinder and packing if partitions are needed. Along the tarpaulin. Particularly suitable for: ridge there is a knotted rope for Dim. (LxW): 4000x5000 mm Emergencies involving hazardous hanging up lamps, dropping bottles Max. inside height: 2400 mm material: etc. Lowest inside height: 2000 mm -changing room etc. for wearers of Dim. packed (LxWxH): 900x550x400 mm chemical protective suits and Weight: 57 kg (incl. air cylinder) 08 wearers of breathing apparatus -combination with ZIEGLER With the following accessories: emergency decontamination Protective cover, repair kit, guys, shower operating instruction, maintenance -room for measuring instruments and repair instructions, inscription sheet (inscription on request and Emergencies involving technical against extra costs). rescue: ...... 56130 -protection and accommodation of injured persons at first-aid ZIEGLER emergency tent -weather protection in rescue and ”Maxi” 4x5 m salvage operations. The tent, as art. No. 56130, but without floor, is then put over the without air cylinder. working area Weight: 47 kg -weather protection for sensitive ...... 56134 equipment

Large-scale emergencies: -command centre -canteen

Some articles may not be available in * = not illustrated 8 specific countries. Details on request. Kap. 08-09 12.04.2005 14:09 Uhr Seite 9

EMERGENCY TENTS WITH ACCESSORIES EMERGENCY DECONTAMINATION SHOWER WITH ACCESSORIES

Longitudinal partition ZIEGLER emergency tent 56338 for ZIEGLER emergency tents SEZ ”Super-Maxi” 8x5 m * ”Maxi” (art. Nos. 56130 and 56134), as art. No. 56112, but without air of light-weight fabric, dark blue, to be cylinder. hooked up in the loops of the ridge Weight: 78 kg hose. In packing bag...... 56120 Dim. packed (LxWxH): 300x200x100 mm Air cylinder 8 l/300 bar * Weight: 1 kg for emergency tent ”Super-Maxi” ...... 56336 8x5 m (art. No. 56120). Weight: 15.5 kg Crosswise partition ...... 56119 for ZIEGLER emergency tents SEZ ”Maxi” (art. Nos. 56130 and 56134), 56131 consisting of two tarpaulins of the same size of light-weight fabric, dark blue, to be hooked up in the loops of ”SE-Shower” the rafter hose. In packing bag. (Emergency decontamination shower) Dim. packed (LxWxH): without breathing air cylinder, for 300x200x100 mm mobile decontamination of above all Weight: 1 kg chemical protection suits. A shower ...... 56135 cubicle of PVC-coated polyamide fabric is fixed to an air-inflated hose ZIEGLER emergency tent frame by means of cords, so that it can ”Super-Maxi” 8x5 m * be removed, if required. The hose Design and function as art. No. 56130, frame is inflated by use of an air cylin- but with 2 windows. der or bellows. In the cubicle there are Dim. (LxW): 5000x8000 mm three shower heads. Water supply by Max. inside height: 2400 mm means of a hose line. The ”SE-Shower” Lowest inside height: 2000 mm Electric heater is erected within 20 s by one person Dim. packed (LxWxH): Nominal heating efficiency 3.2 kW, only using the breathing air cylinder. 900x650x500 mm air capacity 350 m 3 /h, 230 V, 50 Hz, Space needed: 3x3 m Weight: 93.5 kg 13.9 A. Dim. packed (LxWxH): (incl. air cylinder 8 l/300 bar) Dim. (LxWxH): 400x200x335 mm 900x550x400 mm ...... 56112 Weight: 6.8 kg Dim. erected (LxWxH): ...... 56131 1930x1340x2450 mm Weight: 28 kg 56111 (without breathing air cylinder) 08 56335 ...... 56338

Please note: For inflating the ”SE-Shower” standard breathing air cylinders for the fire service can be used.

Further types of emergency tents and accessories are available. Illumination for emergency tents Impact resistant and shock-proof ZIEGLER drip-off/collecting tub aluminium casing, 2x36 W TCL. IP 54, for ”SE-Shower”, of neoprene coated with illuminant (working time approx. polyamide fabric, with all-around 9000 - 12000 h), with input and output inflatable hose rims and hand air pump cables approx. 1.2 m H 07 RN-F, ”Mini-Quicker”. reflector of aluminium, with velcro Inside dim. of floor (LxWxH): fasteners. On both sides with plug and 1500x1200x200 mm socket IP 68 for 230 V. Aluminium box Weight: 8.5 kg not included. (incl. hand air pump) ...... 56111 ...... 56335

* = not illustrated Some articles may not be available in specific countries. Details on request. 9 Kap. 08-10 12.04.2005 14:08 Uhr Seite 10

MEDICAL KITS AND DEVICES

56538 56394 56531

First-aid kit ”FVK” for fire service First-aid kit GALVO Burn kit aluderm AquaCool DIN 14142, with the necessary items ABS synthetic material complying with ”First-aid for burn victims” for an effective first-aid. Weather-proof DIN, with wall bracket. Contents: for immediate supply of cold water at list of contents in the lid. aluderm compresses, aluderm the place of accident. For keeping the Dim. (LxWxH): 350x400x110 mm dressings, aluderm bandages, special injured person damp and cool as well Weight: 6.5 kg bandages for face, hand, arm and leg, as for gentle transport of the patient...... 56538 aluderm eye compresses, eye patch, Kit consisting of: 2 aluderm pads combination eye rinsing bottle, mineral AquaCool, aluderm care unit Aqua- Contents compl. drink, sodium tablets, drinking water, Cool and emergency cloth Plus. for first-aid kit for fire service * cups, Air-Vita resuscitation device, Dim. (LxWxH): 430x320x180 mm Complying with DIN 14142. Söhngen-silk, rescue blanket, ...... 56531 ...... 56540 scissors, instruments. Dim. (LxWxH): 400x300x150 mm 56541 Possible contents ”large” * Weight: 5.2 kg ...... 56394 Complying with DIN 14143, for art. No. 56538 ...... 56542 Ulmer medical case, Basis * with kit WM 8630, consisting of: alu- First-aid kit ”MT-CD Industry” * minium case, anodized, with holders Case of ABS synthetic material, and inserts for all recommended orange, strong handle, with wall devices and substances as well as bracket. Large kit for industries acc. ampoule strips for 21 drugs; oxygen 08 to current guidelines UVV-VBG 109. bottle 0.3 l with accessories. Dim. (LxWxH): 400x300x150 mm Weight: 7.5 kg ...... 56530

Contents DIN 13169, industrial Resuscitation bellow P standard incl. PEEP valve * Weight: 1.4 kg Made of silicone. Consisting of: ...... 56392 patient valve with PEEP, combination inlet valve and adaptors for additional Medical rucksack OCTETT Contents DIN 13169, incl. functions as well as a transparent High-quality rucksack of professional enlarged kit industrial standard Plus anti-dim coated breathing mask for design for use in various rescue opera- Weight: 1.7 kg grown-ups. tions. Contents can be varied ...... 56393 Weight: 0.7 kg ...... 58768 according to requirement. Made of Cordura nylon fabric, PU-coated First-aid kit DIN 13157 * LIFEWAY® (4 times), resistant to tearing, Small kit for industries acc. to the Life-saving through resuscitation impregnated, repellent to dirt. Outside guidelines UVV-VBG 109, box of without danger of contagion * pockets with reflecting strips, double synthetic material. LIFEWAY® resuscitation device with zippers, soft padding of back part, Dim. (LxWxH): 260x160x70 mm nose clamps. LIFEWAY® is small, 2 adjustable belts with snap lock. Weight: 1.3 kg handy and can be used time and again. Dim. (HxWxD): 480x350x220 mm ...... 56535 It is easy to handle: the patient is ...... 56541 treated in the same way as in mouth- Vehicle first-aid kit B DIN 13164, to-mouth resuscitation. LIFEWAY® with box of ABS synthetic material * the bent tube is put on the tongue. The Dim. (LxWxH): 265x175x80 mm mouth cap must cover the lips. Clamp Weight: 0.9 kg (incl. contents) the nose...... 56543 Weight: 0.4 kg ...... 58767

Some articles may not be available in * = not illustrated 10 specific countries. Details on request. Kap. 08-11 12.04.2005 14:08 Uhr Seite 11

STRETCHERS WITH ACCESSORIES

56517 56590 56593 56592 56594

Stretcher DIN 13024, type N * Basket stretcher, 1-piece unit Folding scoop stretcher Frame of light metal, square profile. Spencer, Aluminium, stepwise adjustable in 4 sliding legs, retractable carrying polyethylene, reinforced with an length, folding by means of 2 large handles, covering of coated synthetic aluminium frame. Standard version with snap locks. fabric, with chest and feet straps incl. adjustable footrest and 3 safety straps. Dimensions: snap closure. Dim. (LxWxH): 2170x620x185 mm Length ready for use: Folds longitudinally Weight: 13.5 kg from 1660 to 2100 mm Dim. (LxWxH): 1920x150x145 mm ...... 56590 Length retracted: 1150 mm Weight: 7.4 kg Width: 420 mm ...... 56382 Bridle Weight: 8 kg for basket stretcher with 4 adjustable ...... 56593 Stretcher DIN 13024, type N, 45 mm wide slings and 4 large safety with safety click lock (car-type), snap hooks. Only for 56590 and 56595. Protecting case for scoop stretcher folds longitudinally * ...... 56592 PVC, with carrying handles and velcro ...... 56516 fastener. Protecting case for 1-piece basket ...... 56594 Stretcher DIN 13024, type K, stretcher * folds longitudinally and in half * PVC, with carrying handles and velcro 63721 Dim. (LxWxH): 1048x1708x180 mm fastener ...... 56591 Weight: 7.6 kg ...... 56384 2-piece break-apart basket stretcher * Spencer, 08 Stretcher DIN 13024, type K, polyethylene, parts in the centre. with safety click lock (car-type), Standard version with adjustable foot- folds longitudinally and in half rest and 3 safety straps. The two ...... 56517 pieces can be put on top of each other, facilitating transport and storing. Protecting case for stretcher K * Dim. (LxWxH): 2140x650x190 mm of artificial leather, with zipper. Length packed: 1220 mm Weight: 0.5 kg Weight: 14 kg ...... 56595 ...... 56385 Basket stretcher, 1-piece unit * Woollen blanket * Ferno...... 56400 Dim. (LxW): 1500x2000 mm Ferno rescue board Weight: 1.8 kg Basket stretcher, break-apart unit * ”Millennia Backboard” ...... 57451 Ferno...... 56414 Synthetic material, floating, for use as a firm bed for the injured person and Packing bag for woollen blanket * Bridle * for X-rays. Surface resistant to fluids, Weight: 0.2 kg Ferno, only for 56400 and 56414. chemicals and extreme fluctuations in ...... 57452 ...... 56402 temperature. Incl. Fastrap-Backboard straps. Colour orange. Important! Max. load: 159 kg For reasons of product liability Dim. (LxWxH): 1830x410x50 mm basket stretcher and bridle must Weight: 6 kg be tested together...... 63721

* = not illustrated Some articles may not be available in specific countries. Details on request. 11 Kap. 08-12 12.04.2005 14:07 Uhr Seite 12

FURTHER RESCUE PRODUCTS

56510 56270 56398

Transport hammock Rescue sheet (salvage sheet) Rescue system ”Karlsruhe” Similar to DIN 13023-KT (”navy of synthetic material for the rescue of buried persons stretcher”), grey. For the transport of DIN 13040, for rescue and salvage of The system is designed for shoring up injured persons in any position. persons in confined spaces and in in rescue and salvage of buried 2 longitudinal and 2 transverse poles rugged terrain. Can also be used as persons. The system consists of 5 of aluminium square pipes, heel an emergency stretcher. aluminium tubes of different diameters support. With devices for lowering Dim. (LxW): 2000x700 mm each with a height of 510 mm and a and heaving at head and foot. With Weight: 1.8 kg wall thickness of 3 mm. Each tube safety belt click lock...... 56270 features a reinforcement ring at the top Supplied with carrying bag. (on the outside) and at the bottom (on Dim. (LxW): 2000x1500 mm Carrying bag for rescue/salvage the inside). These rings prevent the Weight: 20 kg sheet of synthetic material * respective smaller tube from slipping ...... 56510 with carrying strap. through. For transport and for attaching ...... 56319 the steps there are handles perpen- Rescue sheet * dicular to the outer reinforcement ring. with carrying bag and 4-strap bridle Emergency rescue blanket * The diameter of the separate tubes are: with snap hooks. Suitable in salvage/ Gold/silver, keeps out cold, wind, rain 1264, 1198, 1132, 1066 and 1000 mm. rescue operations in conjunction with or heat. Packed in PE-bag; laid Max. depth to be reached with this stretcher and vacuum mattress down for motor vehicle first-aid kit system is 2300 mm. Supplied with involving persons who cannot be DIN 13164. 2 securing devices and 5 steps. transported in the conventional way Dim. (LxW): 220x1600 mm Dim. (ØxH): 1310x560 mm 08 (e.g. in case of broken leg, injuries to Weight: 0.055 kg (without securing device) the back). Made of coated trevira ...... 56283 Weight: 105 kg fabric, red...... 56398 Dim. packed (LxDxH): Foil of polyethylene * 550x220x300 mm Black, without loops, without border 56398 Weight: 6.1 kg trimming...... 56195 Dim. (LxWxH): 2250x1400x0,2 mm Weight: 0.5 kg Bridle, 4-strap * ...... 98943 for vertical or horizontal transport in a rescue sheet. Corpse bag * ...... 56194 Non-transparent synthetic material. Can be completely closed by means of zipper. Material resistant to penetration of any kind of fluid. Very strong. Dim. (LxW): 2200x900 mm ...... 98970

Some articles may not be available in * = not illustrated 12 specific countries. Details on request. Kap. 08-13-BIG.fh8 12.04.2005 15:54 Uhr Seite 1

WORLDWIDE LEADING MANUCTURER OF POWER BLOWERS FOR POSITIVE PRESSURE VENTILATION

Exklusive TEMPEST Features: MGV – Mobile Ventilation Unit • Proven performance up to 43.000 m 3 /h The MVU allows Positive Pressure certified by AMCA 240 Ventilation to be applied to large •Largest selection of blower models structures that were nearly impossible Rescue Saw MULTI-CUT from Ø 30 cm to Ø 69 cm, electric to ventilate before. With a blower or gas engine performance of 110,000 - 360,000 m 3 /h The universal fire-fighting chain saw •Highest performance by new special the MVU can be effectively used to for different kind of materials as wood impeller and turbo shroud remove smoke and heat from a tunnel, framing, nails, tar roofing, asphalt •Easy to position by foot operated tilt for example. shingles, metal roofs and even multilayer mechanism, new flip-up handle and Available sizes: Ø 110 cm - 180 cm glass. The MULTI-CUT was specially pneumatic tires constructed and designed for firefighter. •Max. safety by front and rear safety New: Light weight design! The most powerful, dependable and grills - meets strict European CE safety Weight less than 400 kg. easiest to use rescue saw in the standards Airflow-rate: up to 200,000 m3 /h business.

www.big-tempest.de • www.tempest-edge.com Kap. 08-14 12.04.2005 14:15 Uhr Seite 14

POSITIVE PRESSURE VENTILATION

Positive Pressure Ventilation - ”Air diverter” LLH the acknowledged safe and quick for diverting the horizontal air flow method for removal of smoke generated by a power blower to Tested performance data, defined air vertical direction (for ventilation of 63614 cone and quick set-up are the basis sewage systems, basements, large for a successful application. tanks etc.). The air diverter consists of an inflatable one-chamber hose frame Ask for the AMCA 240 record - covered with water-proof, coated fabric a special test for the positive pressure in the centre of which a transparent foil ventilation for the fire services. is inserted, acting as a window. The hose frame is of polyamide. Do not take a risk - trust the Accessories: Air pump, bracing ropes, 63608 ORIGINAL only! packing bag Dim. (LxWxH): erected: 900x1000x900 mm TEMPEST units packed: 550x250x350 mm Weight: 4 kg Power blower TEMPEST 244 ...... 63551 with 4-stroke petrol engine, unleaded 63612 (Tecumseh OHH 5.5), 4.2 kW (5.5 HP). Air delivery acc. to AMCA 240: 63549 approx. 29,300 m3 /h 63551 Air delivery acc. to injector principle: approx. 67,600 m 3 /h Shroud: Ø 610 mm Dim. (WxHxD): 720x787x560 mm Weight: 38.6 kg ...... 63614

Spray fog attachment for TEMPEST power blower. The bunching nozzle of aluminium with 22 bores generates a fine full-cone spray. The diameter of droplets is Power blower TEMPEST 214 approx. 0.2 - 0.4 mm. Through this with 4-stroke petrol engine, unleaded enormous surface enlargement the heat (Tecumseh OHH 5.5), 4.2 kW (5.5 HP), Power blower TEMPEST 274 absorption capacity is considerably electronic ignition, float type carburetor. with 4-stroke petrol engine, unleaded increased. But also for the breaking- 08 The engine is mounted outside the (Honda), 6.6 kW (9 HP). down of chlorine gas or dust trapping propeller axle, V-belt driven propeller. Air delivery acc. to AMCA 240: it is an advantage. Advantage: Homogeneous air flow for approx. 43,000 m 3 /h Delivery at approx. 7 bar: best possible use of the amount of air Air delivery acc. to injector principle: approx. 45 l/min available, increased stability through approx. 99,200 m 3 /h Throw (depending on type of blower): the low centre of gravity, low vibration. Shroud: Ø 685 mm 15 - 20 m Exhaust with screen and connection Dim. (WxHxD): 770x820x605 mm Water supply via an anodized for exhaust hose. Weight: 59 kg aluminium pipe 1” with shut-off 1” Foot-operated tilt mechanism...... 63549 and size C coupling. With attachment 2 wheels and a retractable handle. kit for power blower. Air delivery acc. to AMCA 240: Power blower TEMPEST 244 Weight: 2.6 kg approx. 32,300 m 3 /h Honda 6.5 * ...... 63608 Air delivery acc. to injector principle: with 4-stroke petrol engine, unleaded 74,500 m3 /h (Honda), 4.875 kW (6.5 HP). Power blower TEMPEST Shroud: Ø 540 mm Air delivery acc. to AMCA 240: TCA 21 Power Compact H 5.5 * Dim. (WxHxD): 632x673x560 mm approx. 31,000 m 3 /h as art. No. 63650 (pls. see page 15), but: Weight: 35 kg Air delivery acc. to injector principle: Air delivery acc. to AMCA 240: ...... 63612 approx. 71,500 m 3 /h approx. 28,300 m 3 /h Shroud: Ø 610 mm Air delivery acc. to injector principle: Dim. (WxHxD): 718x788x559 mm approx. 59,500 m 3 /h Weight: 39 kg Shroud: Ø 540 mm ...... 63609 Dim. (WxHxD): 635x664x535 mm Weight: 37 kg ...... 63651

Some articles may not be available in * = not illustrated 14 specific countries. Details on request. Kap. 08-15 12.04.2005 14:14 Uhr Seite 15

POSITIVE PRESSURE VENTILATION (PPV) SMOKE GENERATORS

Power blower TEMPEST Training documentations and 63533 TCA 18 Power Compact H 5.5 * equipment for PPV with 4-stroke petrol engine (Honda), 4.2 kW (5.5 HP). With special propeller Training documentation PPV in of glass fibre reinforced nylon, which German language * reaches a considerably improved air Extensive documentation on PPV, delivery. With folding grip and divided into instructions for the trainer ”Kick-Step”, ensuring easy tilting and operation manuals for the user. and maneuvering. With video film. Air delivery acc. to AMCA 240: For TEMPEST users ...... 67059 approx. 23,500 m 3 /h For anybody ...... 67058 Air delivery acc. to injector principle: approx. 49,500 m 3 /h English version available on request. Shroud: Ø 460 mm Dim. (WxHxD): 560x610x520 mm Smoke generator JEM ZR 12-AL Weight: 32 kg Remote controlled, timer remote ...... 63650 Power blower TEMPEST control, heating element 1000 W. TCA 21 EEx 2.5 V for ventilation Smoke ejection approx. 550 m 3 /min, with 400 V three-phase motor, 50 Hz, heating time approx. 7 min. 63542 2.5 kW, ex-proof, connecting cable Dim. (LxWxH): 500x225x165 mm 1.5 m with ex-proof plug and motor Weight: 11 kg protection. Shroud removable...... 55633 Air delivery acc. to AMCA 240: approx. 19,500 m 3 /h Air delivery acc. to injector principle: approx. 46,800 m 3 /h 55635 Shroud: Ø 540 mm Dim. (WxHxD): 660x690x530 mm Weight: 58 kg ...... 63533

Power blower TEMPEST TCA 18 EEx 1.1 * with 230 V A/C motor, 50 Hz, 1.1 kW, Power blower TEMPEST ex-proof, motor protection 55633 TCA 18 E 1.5 EEx de II CT 6, connecting cable with 230 V A/C motor, 50 Hz, 1.5 kW, H 07 RN-F 3G 2.5, 1.5 m with plug connecting cable 1.5 m with plug. The EEx de II CT 6. The drive of the propel- 08 7-blade propeller is directly flanged to ler is directly flanged to the drive shaft. the drive shaft. Powder coated aluminium shroud with Smoke generator ”TECHNO-FOG” * Air delivery: approx. 17,500 m 3 /h guard grille of galvanized steel wire. with timer remote control, heating Shroud: Ø 460 mm Tilting, powder coated carrying frame element 750 W. Smoke ejection Dim. (WxHxD): 572x600x516 mm of square pipes. Vibration absorbing approx. 350 m 3 /min, heating time Weight: 33.5 kg supports of hard rubber. approx. 7 min. Tank 1 l...... 63542 Air delivery acc. to AMCA 240: Dim. (LxWxH): 410x165x170 mm approx. 9,500 m 3 /h Weight: 6.5 kg Power blower TEMPEST Air delivery acc. to injector principle: ...... 55630 TCA 21 E 2.2 WR * approx. 30,000 m 3 /h with 230 V A/C motor, 50 Hz, 2.2 kW, Shroud: Ø 460 mm Smoke generator Magnum Pro 2000 * adjustable rpm (frequency controlled). Dim. (WxHxD): 560x610x530 mm with timer remote control, heating Air delivery: Weight: 40 kg element 1600 W. Smoke ejection approx. 3,000 - 19,500 m 3 /h ...... 63639 approx. 700 m 3 /min. 9.5 l tank in the Shroud: Ø 540 mm housing. Heating time approx. 8 min. Dim. (WxHxD): 640x663x530 mm Dim. (LxWxH): 695x356x325 mm Weight: 40 kg Weight: 13 kg ...... 63543 ...... 55634

Smoke fluid N 3, 5 l can for smoke generators...... 55635

Smoke fluid N 3, 20 l can * for smoke generators ...... 55629

* = not illustrated Some articles may not be available in specific countries. Details on request. 15 Kap. 08-16 12.04.2005 14:13 Uhr Seite 18

HI-CAFS HI-PRESS HIGH PRESSURE EXTINGUISHING DEVICES

59359 59301 59304

High pressure extinguisher Hi-CAFS High pressure extinguishing device HP extinguishing device HDL 170, The first mobile high pressure HDL 250, built-in unit without tank * universal high pressure unit * extinguisher with CAFS (approved as with rugged steel pipe frame and metal as art. No. 59300, but drive by 1-cyl. V special extinguishing device - rubber buffers for installation. Drive by petrol engine 9.6 kW, water tank extinguishing classes EN 3: 21A + 183B) 2-cyl. V petrol engine 18 HP/13.2 kW. 100 l. With high pressure hose of 50 m for efficient quenching of small fires Oil pressure control, vibration resistant (300 bar), hose detwisting joint, self- with compressed air foam CAFS. Con- starter battery 12 V/44 Ah, electric closing extinguishing pistol with locking stant pressure of 34 bar during the starter, emergency pull starter. mechanism. whole action. The homogeneous foam Exchangeable canister tank of 5 l. Water delivery: max. 21 l/min bubble structure adheres remarkably Power transmission through oil bath Working pressure: 180 bar well on vertical surfaces. The unit can lubricated reduction gear 3600:1450 rpm, Water pressure: 170 bar be refilled in a very short time at a 3-cyl. piston pump, oil bath lubricated, Dim. (LxWxH): 760x570x810 mm reasonable price. with wear-resistant ceramic plungers, Weight (empty): 81 kg Components: pressure tank, stainless steel valves, chem. nickel- ...... 59303 extinguishing pistol with pressure hose plated, corrosionless brass cylinder of 1.5 m, compressed-air cylinder head. High pressure control valve with HP extinguishing device HDL 170 S, 2 l/200 bar with valve, integrated pressure relief for closed extinguishing built-in unit without tank pressure reducer, carrying handle, pistol. Overheating protection through as art. No. 59303. pistol bracket, lock with bursting thermovalve 58 °C, glycerol damped ...... 59304 protection and relief valve. manometer 0 - 400 bar (class 1.6). Cylinder with 0.7 l of foam agent. Hose drum, rotating under full pressure, ”Ölblitz” road cleaner * 0808 Technical data: for 50 m of armored hose (600 bar), With Ölblitz and the watery solution of Volume: 10 l hose detwisting joint, self-closing lock- a de-oiling, biological/ecological agent Flow: 24 l/min able extinguishing pistol. Combination (e.g. BioVersal) an oil trace or oil Throw: approx. 12 m extinguishing adaptor (corrosionless) contaminated area is completely Foam expansion: at least 10-fold adjustable to low expansion foam. de-oiled and thus quickly safe for Operating time: approx. 25 s Water delivery: max. 24 l/min traffic. Dim. (HxWxD): 670x330x240 mm Working pressure: 280 bar Working width 800 mm, working speed Weight: 24 kg (filled) Water pressure: 250 bar max. 3500 m/h, water consumption ...... 59359 Dim. (LxWxH): 980x560x560 mm 1440 l/h, consumption of agent (0.5%) Weight (empty): 138 kg 7.2 l/h. To be used together with High pressure extinguisher ...... 59300 HP extinguishing device HDL 250. AUER Hi-Press * ...... 59305 An excellent extinguishing effect is HP extinguishing device HDL 250, reached through the high pressure and mobile unit with tank of 125 l Long-throw high pressure nozzle for the fine distribution of the water/foam as art. No. 59300, but with chassis, HP extinguishing devices * mixture (fires of class A and B). canister holder and push bar...... 59306 A compressed-air cylinder of 2 l/200 bar ...... 59301 is used for generating the pressure. High pressure mud suction device * Technical data: HP extinguishing device HDL 250, In connection with HP extinguishing Volume: 10 l portable pump version with tank of device HDL 250 the mud suction Working pressure: 34 bar 125 l * device is able to pump 500 l/min at Flow: at least 31 l/min as art. No. 59300, but with frame for max. delivery height of 5 m. Operating time: approx. 20 s portable pump rail, carrying handles, Unique: Ability to suck down to a water Dim. (HxWxD): 670x330x240 mm battery charging socket (DIN 14690). depth of approx. 1 mm Weight: 25 kg (filled) ...... 59302 ...... 59307 ...... 59361

Some articles may not be available in * = not illustrated 16 specific countries. Details on request. Kap. 08-17 12.04.2005 14:13 Uhr Seite 17

VENTILATORS WITH ACCESSORIES OIL, WATER AND DEBRIS ASPIRATORS WITH ACCESSORIES

Ventilator Foam generator * 63699 SUPER-VAC * for AUER ventilator, consisting of water Corrosionless all-steel construction, inlet with screen, inductor, water finish RAL 3000, performance approx. shut-off and size C coupling as well as 13,000 m 3 /h, with ex-proof three- pick-up tube. phase motor EEX-D IIB IP55 T5 F, Foam capacity: 50 m 3 /min 400 V, 1.85 kW, 50 Hz, 2780 rpm, Foam expansion ratio: 1:500 motor protection and plug Water pressure: 4 - 8 bar EEx de II CT 6 400 V, 16 A 5 P. Weight: 11 kg Dim. (LxWxH): 440x480x490 mm ...... 63662 Weight: 50 kg ...... 63539 Suction tube * for ventilator. 5 m long, Ø approx. Flange adaptor * 410 mm, spiral reinforced, for suction for suction and delivery side with or blowing. quick-attach, for SUPER-VAC. Weight: 16 kg Flange: Ø 400 mm ...... 63652 Motor head * Weight: 2.4 kg 230 V, 50 Hz, 800 W, with 10 m cable...... 63669 Pressure tube * ...... 63634 20 m long, Ø approx. 420 mm, of Foam generating kit * synthetic material, only for blowing Adaptor * for SUPER-VAC, consisting of water and for foam delivery. FGR polyester, with Storz-coupling inlet, proportioner, pick-up hose and ...... 63661 38 mm. foam nozzles with vortex part...... 63627 Foam capacity: 100 m 3 /min Connection clamp * Foam expansion ratio: 1:500 at 4 - 5 bar with lever fastener for ventilators. Container 100 l * Weight: 11 kg Weight: 1 kg FGR polyester, with 2 strap handles ...... 63672 ...... 63653 (basic unit comprises 3 containers)...... 63628 Ventilator * VETTER oil, water, debris aspirator AUER, Aspirates liquids and debris. Also Lid * corrosionless, galvanized all-steel suitable for aspirating granular FGR polyester for containers construction, finish RAL 3000, with material, e.g. plastic granulate. Very (basic unit comprises 2 lids). 2 carrying handles and skids. large capacity of 3 x 100 l = 300 litres...... 63629 Performance approx. 10,000 m 3 /h, 3 stackable containers. with ex-proof three-phase motor The adaptor lid with motor head fits on Special hose * 400 V, 2.6 kW, 50 Hz, 2800 rpm, with an iron-hooped drum of 200 l, allowing 4 m long, 38 mm I.D., highly flexible, heavy-duty ventilator and protection all standard iron-hooped drums to be resistant to heating oil, with Storz 08 screen, motor protection and plug used as containers. coupling 38 mm. EEx de II CT 6 400 V/16 A 5 P with Dim. (ØxH): 610x940 mm ...... 63597 safety cap. Dim. (LxWxH): 400x465x587 mm NOTE: Oil and water aspirators are Connection pipe * Weight: 52 kg not to be used for aspirating Bent, with Storz coupling 38 mm...... 63540 explosive and highly inflammable ...... 63632 liquids (= generation of gas-air Adaptor-flange hood * mixture). They are also not suitable Suction pipe, 2-piece * for ventilator AUER, black, for for aspirating dust, which is 1 m long. connection of suction and pressure injurious to health, or liquids that ...... 63596 tubes, with quick-attach. give off toxic fumes. Flange: Ø 400 mm The aspirator is not ex-proof. Liquid ground nozzle * Weight: 3 kg 370 mm wide, with rollers...... 63654 Basic unit ...... 63633 consisting of the following 9 articles. Weight: 43 kg Trolley * ...... 63699 FGR polyester, with polyamide rollers resistant to heating oil...... 63622

* = not illustrated Some articles may not be available in specific countries. Details on request. 17 Kap. 08-18 12.04.2005 14:12 Uhr Seite 18

OIL, WATER AND DEBRIS ASPIRATORS WITH ACCESSORIES

Set of accessories for VETTER oil, 63697 63458 water and debris aspirators * consisting of the following 7 articles. Weight: 7 kg ...... 63700

Special suction hose * 6 m long, 38 mm I.D., very flexible, resistant to heating oil, with Storz coupling 38 mm...... 63624

Filter cartridge * ...... 63623

Circuit breaker/plug * with connecting cable and coupling. VETTER Permanent aspirator VETTER Mini-Permanent aspirator ...... 63455 Aspirates liquids and simultaneously Compact liquid aspirator. pumps them to a height of up to 6 m. Rates of delivery as Permanent Narrow space nozzle * Delivers 250 l/min to a height of 1 m aspirator. Container with a volume of 500 mm long. or 110 l/min to a height of 6 m. The 45 l. Accessories on the trolley...... 63625 liquids are aspirated into a 100 l Dim. (LxWxH): 530x490x730 mm container. If a certain level of liquid is Combination ground nozzle * reached, the pump is automatically Basic unit 300 mm wide, with bristles and switched on and the container contents consisting of the following articles: ground plate, for aspirating dust and are passed on. 63706 Filter basket liquids from floor carpeting. The unit is not ex-proof. 63597 Special suction hose ...... 63692 Dim. (ØxH): 610x860 mm 63632 Connection pipe 63596 Suction pipe, 2-piece Nozzle * Basic unit 63633 Liquid ground nozzle 200 mm wide, of light metal. consisting of the following articles: (pls. see page 17) ...... 63626 63446 Suction and pump unit (below) as well as art. Nos. 63448, 63449 and 63628 Container 100 l 63452 (pls. see page 19). Floating suction collector * 63597 Special suction hose Weight: 40 kg FGR polyester, for aspirating oil from 63632 Connection pipe ...... 63458 small pools of water. 63596 Suction pipe, 2-piece ...... 63607 63633 Liquid ground nozzle Set of accessories for 0808 63622 Trolley VETTER Permanent aspirator and (pls. see page 17). Mini-Permanent aspirator * Weight: 35 kg consisting of the following articles: ...... 63697 63624 Special suction hose 63455 Circuit breaker/plug Suction and pump unit for 63625 Narrow space nozzle VETTER Permanent aspirator * 63626 Nozzle consisting of: 63607 Floating suction collector motor head 230 V, 800 W, 50 Hz, (pls. see left column) adaptor (FGR polyester) with switch as well as art. No. 63453 (below). field, pump 230 V, 600 W with Weight: 6 kg automatic switch control...... 63698 ...... 63446 Shut-off device * Filter basket * Size C. Screw-on type for collecting large ...... 63453 pieces of debris, as additional protection of the pump...... 63706

Some articles may not be available in * = not illustrated 18 specific countries. Details on request. Kap. 08-19 12.04.2005 14:12 Uhr Seite 19

ASPIRATORS FOR THE FIRE SERVICE ACCESSORIES FOR VETTER MINI-PERMANENT ASPIRATOR

Suction and pump unit 63556 63599 for Mini-Permanent aspirator * with motor head 230 V, 50 Hz, 800 W and pump 230 V, 600 W. Adaptor and hood of FGR polyester, with switch field, size Storz C pump coupling, connecting cable of 10 m, splashproof...... 63448

Container 45 l * FGR polyester, transparent...... 63449

Trolley * with holders for accessories...... 63452 Kärcher aspirator for the fire service WAP aspirator for the fire service NT 601 K-F SQ 650-71 ”AE-F” for continuous aspiration and (Successor to TURBO 1001 AE-F) conveyance of liquids. The submersible with automatic draining by means of pump in the container ensures a built-in submersible pump with continuous draining of water. When electronic control. Level finding by the water in the container has reached means of pressure differential a certain level, the submersible pump recording. is switched on via an electronic float Standard equipment and switch. An additional double-float is accompanying accessories: provided for double over-flow protec- oil-resistant suction hose of 4 m tion. size NW 36; Standard equipment and 2 suction pipes of metal at 515 mm; accompanying accessories: bent hand pipe of steel; oil-resistant suction hose of 4 m ground nozzle 460 mm wide; size NW 40; narrow space nozzle 250 mm; 2 suction pipes of metal at 500 mm; aluminium universal nozzle 150 mm metal elbow; wide; narrow space nozzle of synthetic ball valve NW 32; material; basket for accessories ground nozzle adjustable in height, 420x420x300 mm; 370 mm wide with rollers and connecting cable of 10 m 08 exchangeable oil-resistant rubber lips; (H 07 RN-F 3G 1.5) with protective mud container of FGRP; circuit breaker. size C coupling for connections to size Technical data: C42 hose; 64 l container quick-acting gate valve; Voltage: 230 V, 50 Hz connecting cable of 10 m Power input motor: 1500 W (H 07 RN-F 3G 1.5) with safety plug Power input pump: 640 W and fixed fault current breaker. Air flow: 60 l/s Technical data: Max. vacuum: 230 mbar 60 l container Water suction: 205 l/min Voltage: 230 V, 50 Hz Pump capacity: 310 l/min Power input motor: 1380 W Dim. (LxWxH): 560x595x945 mm Power input pump: 800 W Weight: 39 kg Air flow: 57 l/s ...... 63599 Max. vacuum: 220 mbar Dim. (LxWxH): 655x440x905 mm Weight: 35 kg ...... 63556 Ex-proof units on request.

* = not illustrated Some articles may not be available in specific countries. Details on request. 19 Kap. 08-20.fh9 12.04.2005 15:40 Uhr Seite 1

reliable • rugged • powerful Kap. 08-21 12.04.2005 14:19 Uhr Seite 21

SUBMERSIBLE PUMPS

21294 21032 21292

Submersible single-stage pumps, Submersible pump TP 8-1, Submersible pump T 6 L suitable for lifting and transferring DIN 14425 Maintenance-free, featuring a low level clear or heavily polluted water. PVR 306/11/84. suction device allowing the picking up Maintenance-free, safe also in dry Maintenance-free, with automatic of liquids down to a layer of few operation, rugged and handy. Due to rotation system, safe when running millimetres only. its design checking and changing of dry. With ”MD-Elektronik” that functions With A/C motor 230 V, 50 Hz, 8.1 A, oil are inapplicable. These submersible as protection against phase failure, with 20 m connecting cable H 07 RN-F, pumps can be used in water-preserve temperature control and voltage splash-proof plug. areas. indicator. Particles of 8 mm can pass through. With three-phase motor 400 V, 50 Hz, With size C Storz coupling. Submersible pump TP 4-1, 5.5 A, with 20 m connecting cable Power: P-1: 1.6 kW, P-2: 1.2 kW DIN 14425 H 07 RN-F, CEE-plug 5-pole 16 A. Pump performance: PVR 305/10/84. Particles of 10 mm can pass through. 660 l/min at 0 bar, 560 l/min at 0.5 bar, Maintenance-free, provided with a With size B Storz coupling. 400 l/min at 1 bar, 160 l/min at 1.5 bar, low-level suction device allowing the Power: P-1: 3.0 kW, P-2: 2.4 kW 0 l/min at 1.8 bar pumping up of liquids down to a layer Pump performance: Dim. (ØxHxlargest outlet-Ø): of few millimetres only. 1300 l/min at 0 bar, 1150 l/min at 0.5 bar, 200x500x230 mm With A/C motor 230 V, 50 Hz, 8.5 A, 870 l/min at 1 bar, 440 l/min at 1.5 bar, Weight: 21 kg with 20 m connecting cable H 07 RN-F, 0 l/min at 2 bar ...... 21292 watertight plug DIN 49443. Dim. (LxWxH): 390x260x560 mm Particles of 8 mm can pass through. Weight: 40 kg Protective circuit breaker 230 V * With size B Storz coupling...... 21032 for submersible pump T 6 L, prevents 08 Power: P-1: 1.8 kW, P-2: 1.3 kW accidents in case of defect cable or Pump performance: Submersible pump TP 15-1, equipment. Splashproof. 700 l/min at 0 bar, 610 l/min at 0.5 bar, DIN 14425 * With 1.5 m connecting cable 400 l/min at 1 bar, 220 l/min at 1.2 bar, PVR 307/12/85. H 07 RN-F 3G 1.5 and coupling IP 44. 0 l/min at 1.6 bar As art. No. 21032, but with three-phase ...... 21296 Dim. (LxWxH): 235x190x500 mm motor 400 V, 50 Hz, 9.3 A, Weight: 21 kg with 20 m connecting cable H 07 RN-F, Submersible pump T 8 * ...... 21294 5-pole CEE plug. Maintenance-free, featuring a low level Particles of 15 mm can pass through. suction device allowing the picking Fault current breaker 230 V * With size A Storz coupling. up of liquids down to a layer of few 16 A, 0.03 A, for submersible pump and Power: P-1: 5.3 kW, P-2: 4.5 kW millimetres only. With three-phase other mobile electric equipment, IP 54, Pump performance: motor 400 V, 50 Hz, 3.8 A, with 20 m with cable of 1.5 m H 07 RN-F 3G 1.5 2200 l/min at 0 bar, 1980 l/min at 0.5 bar, connecting cable H 07 RN-F, 5-pole with coupling DIN 49442/443, pressure 1520 l/min at 1 bar, 850 l/min at 1.5 bar, CEE-plug. Particles of 8 mm can pass water protected IP 68. 0 l/min at 2.1 bar through. With size B Storz coupling...... 21297 Dim. (LxWxH): 440x260x570 mm Power: P-1: 2.0 kW, P-2: 1.5 kW Weight: 47 kg Pump performance: ...... 21034 800 l/min at 0 bar, 690 l/min at 0.5 bar, Further submersible pumps on 500 l/min at 1 bar, 210 l/min at 1.5 bar, request. Cable holder for TP 4-1, T 6 L, T 8 * 0 l/min at 1.8 bar for storing of 20 m of connecting cable. Dim. (ØxHxlargest outlet-Ø): To be hooked to the carrying handle of 200x500x230 mm the pump. Weight: 23 kg ...... 21295 ...... 21293

* = not illustrated Some articles may not be available in specific countries. Details on request. 21 Kap. 08-22 12.04.2005 14:18 Uhr Seite 22

SUBMERSIBLE PUMP UNITS MULTI-PURPOSE PUMPS

1safety rope A 20 K, DIN 14920, with 21298 20459 snap hook (art. No. 53740) 1wire grid basket, galvanized, with carrying handles, mesh size 20 - 25 mm, stackable, can be used for transport and as suction basket (art. No. 83150) Dim. (LxWxH): 615x455x405 mm Total weight: 65 kg ...... 21037

Submersible pump unit TP 15/1 * consisting of: submersible pump TP 15/1, 2 coupling wrenches, synth. fibre hose, collecting head A/BB of light metal, valve line, snap hook, Submersible pump unit TP 4/1 rope hose holder, wire grid basket Multi-purpose pump NP 8 B complete in wire grid basket...... 21035 with 4-stroke petrol engine 3.7 kW. Contents: Particles of 10 mm can pass through. 1submersible pump TP 4/1 Further submersible pumps Suction height 8.4 m, size B suction DIN 14425 (art. No. 21294) on request. and delivery connections. 1cable holder for 20 m connecting Performance: 850 l/min at 0 bar, cable (art. No. 21295) Multi-purpose pumps 770 l/min at 0.5 bar, 650 l/min at 1 bar, 2coupling wrenches ABC, Multi-purpose pumps are rugged, self- 360 l/min at 2 bar, 0 l/min at 3 bar DIN 14822 (art. No. 44913) priming centrifugal pumps for use also Dim. (LxWxH): 620x460x500 mm 1delivery hose DIN 14811, size B, with heavily polluted liquids. Weight: 45 kg 20 m (art. No. 30223) The pumps can also be used for ...... 20459 1discharge pipe ”B”, with size B transferring heating or Diesel oil (the coupling at one end (art. No. 42802) instructions must be followed strictly). 20462 1hose protective bend for size B and These large-capacity pumps are size C hoses (art. No. 32804) maintenance-free and easy to handle. 1rope hose holder DIN 14828, 1.6 m The low weight makes them handy and (art. No. 53912) easy to carry. 1safety rope A 20 K, DIN 14920, with snap hook (art. No. 53740) 20458 1fault current breaker, A/C 230 V (art. No. 21297) 08 1wire grid basket, galvanized, with carrying handles, mesh size 20 - 25 mm, stackable, can be used for transport and as suction basket (art. No. 83150) Dim. (LxWxH): 615x455x405 mm Total weight: 50 kg ...... 21298 Multi-purpose pump NP 12 B with 4-stroke petrol engine 5.9 kW. Submersible pump unit TP 8/1 * Particles of 20 mm can pass through. complete in wire grid basket. Suction height 8.4 m, size B suction Contents: and delivery connections. 1submersible pump TP 8/1 Performance: 1200 l/min at 0 bar, DIN 14425 (art. No. 21032) Multi-purpose pump NP 4 B 1000 l/min at 1 bar, 700 l/min at 2 bar, 2coupling wrenches ABC, with 4-stroke petrol engine 1.85 kW. 250 l/min at 3 bar, 0 l/min at 3.5 bar DIN 14822 (art. No. 44913) Particles of 8 mm can pass through. Dim. (LxWxH): 720x540x550 mm 1delivery hose DIN 14811, size B, Suction height 8.4 m, size C suction Weight: 58 kg 20 m (art. No. 30223) and delivery connections...... 20462 1discharge pipe ”B”, with size B Performance: 500 l/min at 0 bar, coupling at one end (art. No. 42802) 450 l/min at 0.5 bar, 380 l/min at 1 bar, 1hose protective bend for size B and 200 l/min at 2 bar, 0 l/min at 3 bar size C hoses (art. No. 32804) Dim. (LxWxH): 500x370x450 mm 1rope hose holder DIN 14828, 1.6 m Weight: 30 kg Other versions (e.g. with Diesel (art. No. 53912) ...... 20458 engine) on request.

Some articles may not be available in * = not illustrated 22 specific countries. Details on request. Kap. 08-23 12.04.2005 14:18 Uhr Seite 23

PORTABLE TURBO SUBMERSIBLE PUMPS DIN 14426 BASEMENT DRAINAGE PUMPS

Portable turbo submersible pumps, Bilge turbo submersible pump 21305 DIN 14426 AWG, Water is the source of energy in these PVR 316/2/85. pumps. The pump is driven by means Housing and impellers of aluminium of a turbine. The performance depends alloy, pump shaft of stainless steel, on the inlet pressure. Particularly protecting basket of galvanized suitable for the setup of a closed ring chromatized steel plate. Minimum conduit in conjunction with tankers liquid level for suction 15 mm. and pumpers. Turbine housing and Featuring one size B pressure inlet pump housing are separated and and one size B delivery outlet for the sealed, preventing a mixing of the pressure water and one size B delivery pressure water and the flow medium. outlet for the flow medium. With drain Turbine rotor and pump impeller are valve for the pressure water line and mounted on the same shaft. loops for ropes. Dim. (LxWxH): 400x300x290 mm Weight: 13.5 kg 21036 ...... 21031 Basement drainage pump K 2 MAST, with size C Storz coupling. 21306 Single-stage centrifugal pump with electric motor 2.1 kW, 230 V, power cable 10 m, housing of impact resistant, corrosionless synthetic material, motor impermeable to pressure water. Particles of up to 10 mm can pass through. Minimum liquid level for suction 3 mm. Performance at: 0 bar 250 l/min 21031 0.4 bar 135 l/min 0.7 bar 0 l/min Weight: 4.9 kg Turbine submersible pump Turbimat ...... 21305 TU 65, DIN 14426 PVR 315/1/85. Pressure hose for basement Housing of seawater resistant light Basement drainage pump K 2 S drainage pumps K 2 und K 2 S * alloy, shaft of stainless steel, sealings MAST, Silberfuchs K 2 L, 15 m with coupling. of Viton. with size C Storz coupling and float ...... 30201 Minimum liquid level for suction 10 mm. switch. 08 Particles of 25 mm can pass through. Single-stage centrifugal pump with Suitable for basements, pits, etc. electric motor 2.1 kW, 230 V, power Connection by means of size B cable 10 m, housing of impact Further pump versions and couplings. High stability due to the resistant, corrosionless synthetic accessories on request! removable, large protective basket. material, motor impermeable to Dim. (largest Ø x H): 380x390 mm pressure water. Particles of up to Weight: 12 kg 10 mm can pass through. Minimum ...... 21036 liquid level for suction 3 mm. Performance at: 0 bar 250 l/min 0.4 bar 135 l/min 0.7 bar 0 l/min Weight: 5 kg ...... 21306

* = not illustrated Some articles may not be available in specific countries. Details on request. 23 Kap. 08-24 12.04.2005 14:17 Uhr Seite 24

FLOOD PROTECTION

57020 56454 57021

Heavy-duty sandbag filling Electric driving motor * Quick-Damm type E appliance ”Power-Sandking” 15 HP/11 kW. The Quick-Damm consists of a steel- Sand, fine gravel etc. (wet or dry) up to ...... 57022 frame construction that easily can be a size of 30 mm can be used for filling. unfolded and erected in a few seconds. The appliance is designed for all sizes Manual sandbag sewing-up The container is open at the top and is of sandbags. Supplied with sandbag machine * filled with mineral solids e.g. sand, holding pins and cover grid. Three- with finger protection and bag lead-in. gravel, soil or soil/stone mixture. All point attachment for tractor or Unimog, Weight: 6.5 kg common earth-moving machines such with link pin and link chain. Heavy drive ...... 57025 as wheel loaders, excavators, carter- unit, with spring dovetail (stirrer). pillars or mixing vehicles can be used. Capacity: approx. 800 l sand Sewing table The filled dike forms a steady and Max. filling capacity: with gibbet and spring loaded rugged protection that can be repeatedly approx. 3500 bags/h (via 7 fill nozzles) suspension device * re-used. A great advantage is that the Colour: red RAL 3000 for 1 or 2 machines, with sewing kit. containers can be filled with material Height: 1550 mm ...... 57026 available locally (also an economic Height with fill funnel: 2070 mm factor). Covering type B (geotextile Weight: 560 kg Sewing yarn * fleece) for solid filling material...... 57020 for art. No. 57025, of polyester, 1 roll approx. 960 m, colour white. 56455 Fill funnel 2x2 m Weight: 0.2 kg for wheel loader and front loader filling...... 57029 08 Weight: 230 kg ...... 57021 Sandbag of PP tissue with closing strap and special quick closing fastener. Please note: Minimum purchase: 1000 pcs. For operating the ”Power-Sandking” a Dim. (LxW): 600x300 mm tractor or Unimog must be available Weight: 0.03 kg (drive via PTO). As an alternative the ...... 57027 appliance can be driven by an electric motor. Tandem sandbag of PP for flood protection * 5 years UV stabilized. Dim. (LxW): 800x650 mm Weight: 0.14 kg Quick-Damm type E-BM 2 ...... 57028 Dim. (LxWxH): 2x1x0.8 m Weight: 40 kg...... 56454 Sandbag of synthetic fibres * Empty, with draw string. Quick-Damm type E-BM 3 Capacity: 15 kg Dim. (LxWxH): 3x1x0.8 m Dim. (LxW): 600x300 mm Weight: 60 kg...... 56455 Weight: 0.08 kg ...... 61962 Quick-Damm type E-BL * Dim. (LxWxH): 3x1x1.25 m Weight: 120 kg...... 56456

Some articles may not be available in * = not illustrated 24 specific countries. Details on request. Kap. 08-25 12.04.2005 14:17 Uhr Seite 25

WATER RESCUE

56175 56171 63741

Life vest Secumar BS 16 BG Life vest ”Seepilz Sport 88” Air raft ”SEB” with Secumatic 3001 S, Secumar DIN EN 395, 0200 CE 95, of soft foam (Emergency raft), Protect-System, neck fleece, covered with orange nylon fabric. With similar to DIN 14961, designed as adjustable back strap. BG (prof. retro-reflective strips and 2-tone signal RTB 1. association) and CE approved. whistle. The four air chambers are filled within ...... 56175 Size 46-50. 30 s by means of a breathing air Weight: 0.8 kg cylinder 4 l/200 bar. Strong rubber Life vest Secumar Golf 150 * ...... 56171 profiles underneath the raft make it with Secumatic 3001 S, inflates fully possible to use the raft also in ice automatically. Approved by BSBG Life vest Secumar Bravo of rescue. An additional ice sledge is not and SeeBG (professional association 100-N class * needed. Carrying capacity approx. and sea-association), complies with PE-foam. Colour of life vest orange/ 700 kg semi-submerged. EN 396 CE. Buoyancy 150 N. blue. With 100 cm2 3M retro-reflective Colour: yellow Weight: 0.9 kg strips, 2-tone whistle and with crotch Basic equipment: ...... 56214 and waist straps. raft with 4 chambers, 4 fill valves and Buoyancy approx. 110 N. Designed for 2 excess pressure valves, 8 holders

Spare cartridge CO2 * weights of 80 to 120 kg. for the grip rope (also carrying rope), 32 g, with 2 pills, for art. Nos. 56175 Meets all requirements of EN 395. 1 drag device in the bow, 2 oar holders, and 56214. Weight: 0.8 kg 2 inside grip lines, 4 hoist devices, ...... 56215 ...... 56069 2 wooden benches, 1 varnished wooden floor, 1 breathing air cylinder 200 bar, Life vest for the fire service Rescue ring * 1 divider, packing canvas. 08 Secumar 40 SF-D * Buoyancy 21.6 daN (22 kp), red/white, Please state desired marking when Inflates fully automatically, colour with 10 mm black/white PP grip rope. ordering. bright orange. Specially designed for Ø 750x450 mm Diameter of hose: 400 mm persons carrying breathing apparatus. Weight: 1.7 kg Dim. (LxW): 3000x1200 mm With aluminized protective cover...... 56199 Weight: 22 kg Approved by BSBG and tested in (with wooden floor 37 kg) compliance with the new European Rescue ring ”International” * ...... 63741 standard EN 399, 0299 CE 93. Styrofoam FH 105, flame retardant, oil- Buoyancy 360 N. resistant, with synthetic PVC-coated Heaving line/life line * Weight: 1.2 kg covering, red/orange. With retro- 30 m, floating, of synthetic material ...... 56149 reflective strips. Complies with DIN acc. to regulations. 83500. Colour orange/black.

Spare cartridge CO2 * Weight: 2.5 kg Ø 8 mm, with spliced eyelet. 75 g, with 2 pills, for art. No. 56149...... 56168 ...... 56320 ...... 56164 Sandbag for heaving line * Life vest Secumar Golf 275 * Weight: 0.5 kg filling Safety vest 275 N with separate ...... 56321 protective cover, with lifting becket, belt safety device, cartridge 56 g, inflates fully automatically. BSBG approved, complies with EN 396 CE. Buoyancy 300 N...... 56309

* = not illustrated Some articles may not be available in specific countries. Details on request. 25 Kap. 08-26 12.04.2005 14:16 Uhr Seite 26

WATER RESCUE

Ice sledge for RTB 1 * bottom of the boat, all-around inside GRP, red (RAL 3000). With skids of grip rope, 3 holders for 2 seats each, stainless steel, edge trimmings of board in the rear. For engines of up to plastic covered aluminium construction. 75 HP. 63511 Dim. (LxW): 3000x1200 mm Colour: red Weight: 34 kg Carrying capacity: ...... 63746 1100 kg semisubmerged Diameter of hose: 450 mm Rescue boat RTB 2 * Dim. (LxW): 4300x1950 mm Similar to DIN 14961, of polyester Weight: 128 kg fabric with hypalon/neoprene coating...... 63513 Marking as requested. 6 separate air chambers, inflatable Set of accessories for RTB 2 ”ALU” * 63512 keel, rear upper stern for outboard DIN 14961 (without life vests), engine fixed by means of vulcanization, consisting of 3 wooden benches, 2 chafing protection strips on the bellows with fill hose and pressure In compliance with the German bottom of the boat, chafing protection indicator, manometer, 4 paddles at DIN-standard the rescue boats must along the sides of the boat, 4 hand 1500 mm, boat hook, set of flare be provided with 4 life vests. grips on each side, 2 grip ropes with cartridges (9 pcs.) with distress signal Please see page 25. snap hooks, securing plate for engine, holder, manual drain pump, tackle mirror protecting plate, 2 drag devices knife, repair kit, spare can, anchor set Rescue boat RTB 1 at 1000 kg breaking strength, 1 drag (folding anchor 2.5 kg with 30 m of Similar to DIN 14961, of polyester device in the bow, 4-part wooden floor, rope), engine securing line. fabric with hypalon/neoprene coating. 3 wooden benches, all-around inside Weight: 28 kg Marking as requested. grip rope as well as lugs at the bottom ...... 63514 4 separate air chambers, 4 fill valves, of the boat. For engines of up to 50 HP. 8 holders for the grip rope (also carrying Colour: black Further boats as well as outboard rope), 1 drag device in the bow, 2 oar Carrying capacity: engines and boat trailers on request. holders, 2 inside grip ropes, 4 hoist 1000 kg semisubmerged devices, 2 wooden benches, Diameter of hose: 450 mm 63711 1 varnished wooden floor. Dim. (LxW): 4300x1700 mm Colour: yellow Weight: 113 kg Carrying capacity: ...... 63712 700 kg semisubmerged Diameter of hose: 400 mm Set of accessories for RTB 2 * Dim. (LxW): 3000x1200 mm DIN 14961 (without life vests), Weight: 35 kg consisting of bellows with fill hose and 08 ...... 63511 pressure indicator, manometer, 4 paddles at 1500 mm, boat hook, set Rescue boat RTB 1 ”MOT” * of flare cartridges (9 pcs.) with distress Similar to DIN 14961, but can be fitted signal holder, manual drain pump, with an engine of max. 10 HP. tackle knife, repair kit, spare can, Of polyester fabric with hypalon/ anchor set (folding anchor 2.5 kg with neoprene coating. 30 m of rope), engine securing line. Colour: yellow Weight: 22 kg Marking as requested...... 63731 Combi-rescuer As art. No. 63511, but with rear upper for water and ice rescue. Can be stern for outboard engine. Rescue boat RTB 2 ”ALU” * handled by one person only. Various ...... 63740 Similar to DIN 14961, of polyester applications for the fire service (for ice fabric with hypalon/neoprene coating. rescue, as a stretcher, as a rescue Set of accessories for RTB 1 Marking as requested. floating stretcher etc.). Made of poly- DIN 14961 (without life vests), Submerged part, however, of sea- ethylene, sintered, weather and sea- consisting of bellows with fill hose and water resistant aluminium of 3 mm. water resistant. pressure indicator, manometer, 4 air chambers, chafing protection Colour: red 4 paddles at 1500 mm, boat hook, along the sides, 4 carrying handles Dim. (LxWxH): 1730x900x500 mm set of flare cartridges (9 pcs.) with on each side, 2 grip ropes with Weight: 20 kg distress signal holder, manual drain snap hooks, securing plate for engine, ...... 63711 pump, tackle knife, repair kit. upper stern protection plate, 2 drag Weight: 16 kg devices at 1100 N breaking strength, ...... 63512 drag device in the bow, lugs at the

Some articles may not be available in * = not illustrated 26 specific countries. Details on request. Kap. 08-27 12.04.2005 14:24 Uhr Seite 27

LIFTING AND PULLING DEVICES WITH ACCESSORIES

Grab winch, type Z 16 * Tool box Pulley (guide roller) 220 kN * DIN 14800-5, large basic set for T 516, of steel plate, with lubricants for rescue vehicles RW 1 and RW 2. consisting of: and tools and 10 spare shear pins. Max. load 220 kN, suitable for wire -grab winch T 516, 16 kN Weight: 4 kg ropes of diameters of up to 18 mm, -20 m wire rope Ø 11.5 mm ...... 63133 diameter of roller 211 mm. -wire rope pulley 3 t Dim. (LxWxH): 420x260x145 mm -2 galvanized wire rope slings at 1.5 m Carrying box Weight: 18 kg -wedge-rail anchor size 2 Steel plate, lockable, for grab winch ...... 63818 -tool box, carrying box Z16with accessories. With 2 handles. -ground anchor size 1 Dim. (LxWxH): 706x218x362 mm Steel rod * Dim. of carrying box (LxWxH): Weight: 9.5 kg Hot galvanized, for transport and 706x218x362 mm ...... 63132 moving of heavy loads. Weight: 83 kg Ø 82.5 mm, 5 mm strong, ...... 63239 Wedge-rail anchor size 2 1000 mm long. for 1.6 t, for wire ropes of 10.5 - 14 mm Weight: 9 kg diameter...... 63913 63132 Dim. (LxW): 370x95 mm Weight: 2.7 kg Needle * ...... 63170 Galvanized with hand grip, for animal 63133 63256 lifting device. Wire rope * Length: 1800 mm Ø 11.5 mm, length 40 m, 95 kN, one Weight: 4 kg 63170 end tapered, the other end with load ...... 63419 hook 1.6 t. Coiled on reel. 63177 Dim. (LxWxH): 200x460x296 mm Wire rope 16 * Total weight: 29.5 kg DIN 3060-FE-bk-1570 sZ round strand 63233 ...... 63178 rope, Ø 16 mm, mathematical tensile 63137 63176 strength 144 kN, twist in clockwise direction, both ends with loops of 63816 200 mm length,

Grab winch, type T 516 2.5 m long 16 kN (1.6 t), with telescopic lever bar Weight: 2.6 kg ...... 54151 650 - 1150 mm. 5 m long Dim. (LxWxH): 530x130x320 mm Weight: 5.1 kg ...... 54149 Weight: 13 kg 10 m long ...... 63256 Weight: 10.1 kg ...... 54148 15 m long 08 Wire rope pulley Weight: 15 kg ...... 54147 3.2 t, diameter of roller 200 mm. 20 m long Total length: 640 mm Weight: 20 kg ...... 54146 Weight: 14 kg ...... 63233 Band sling 0.6 m long * EN 795, 25 mm wide, neatened, tensile Ground anchor Pulley (guide roller) 140 kN strength 22 kN, red. consisting of 2 lashings, each with for rescue vehicles RW 1 and RW 2...... 51952 holes for 4 pegs, 8 pegs at 750 mm Max. load 140 kN, suitable for wire with tempered tip, shackle 3 t. ropes of diameters of up to 14 mm, Band sling 1.5 m long * Total weight: 24 kg diameter of roller 165 mm. EN 795, 25 mm wide, neatened, tensile ...... 63176 Dim. (LxWxH): 335x203x125 mm strength 22 kN, bright yellow. Weight: 9.5 kg ...... 51953 Wire rope sling ...... 63816 Galvanized, Ø 14 mm, both ends with Band sling 1 m long * eyelets, 1.5 m long. EN 354, 25 mm wide, neatened, tensile Weight: 1.5 kg strength 22 kN, yellow...... 63137 ...... 51956

Wire rope Ø 11.5 mm, length 20 m, one end tapered, the other end with hook. Coiled on hand reel. Weight: 12.4 kg ...... 63177

* = not illustrated Some articles may not be available in specific countries. Details on request. 27 Kap. 08-28 12.04.2005 14:24 Uhr Seite 28

LIFTING AND PULLING DEVICES WITH ACCESSORIES

Grab winch, type Z 32 * Wedge-rail anchor size 3 * 2 m, yellow, DIN 14800-5, large basic set for 3.2 t, for hose diameters of bearing strength 3,000 kg. consisting of: 15 - 21 mm...... 53745 -grab winch 32 kN Dim. (LxW): 620x110 mm -30 m wire rope Ø 16 mm Weight: 6.8 kg 63173 -swivel hook, wire rope pulley ...... 63169 -2 wire rope slings at 2 m -wedge-rail anchor size 3 Swivel hook * -tool box, carrying box 32 kN, rotating, with ball bearings. -ground anchor size 2 Weight: 7.6 kg Dim. of carrying box (LxWxH): ...... 63157 760x280x450 mm Weight: 166.7 kg Shackle DIN 82101 * ...... 63182 Steel, hot galvanized, A 2 t Grab winch, type T 532 * Dim. (DxW): 120x90 mm 32 kN (3.2 t), with telescopic lever bar Weight: 1 kg ...... 81212 650 - 1150 mm. A 3 t Dim. (LxWxH): 640x150x360 mm Dim. (DxW): 150x110 mm Weight: 22 kg Weight: 1.8 kg ...... 81233 ...... 63184 A 4 t Ground anchor remover Dim. (DxW): 160x130 mm consisting of 1 jack with 5 slots in Wire rope pully * Weight: 2.4 kg ...... 81234 different heights. 6.4 t, roller Ø 250 mm, 770 mm high. A 5 t Height of jack: 680 mm Weight: 28 kg Dim. (DxW): 190x140 mm Length of drawing lever: 1090 mm ...... 63161 Weight: 3.9 kg ...... 81251 Weight: 16 kg ...... 63173 Ground anchor size 2 * Shackle DIN 82101 * consisting of 3 lashings each with High-tensile heat-treated steel, holes for 4 pegs, 12 pegs at 750 mm galvanized, with forged-on nut, with tempered tip, 1 shackle. C 1.6 32801 Total weight: 36 kg bearing strength 5 t...... 63151 Dim. (DxW): 110x100 mm Weight: 0.8 kg ...... 81241 Wire rope sling * C 3 Galvanized, Ø 18 mm, with eyelets on bearing strength 10 t. both ends, 2 m long. Dim. (DxW): 150x145 mm 32805 08 Weight: 3.4 kg Weight: 1.8 kg ...... 81242 ...... 63158 C 5 bearing strength 15 t. Wire rope * Dim. (DxW): 200x180 mm Ø 16 mm, 30 m long, 189 kN, one end Weight: 4.3 kg ...... 81243 tapered, the other end with load hook 3 t. Coiled on reel with handles. Loop of polyester (PES) * Weight: 41.5 kg E DIN EN 1492-2, endless Edge slider ...... 63179 6 m, orange, for max. 5 t, of steel. For protection of bearing strength 10,000 kg. wire ropes when pulled around corners Tool box * ...... 53748 and edges. With 3 rotating rollers and for T 532, of steel plate, with tools and handle. Varnished. lubricants as well as with 10 spare 10 m, orange, Dim. (LxWxH): 250x220x190 mm shear pins. bearing strength 10,000 kg. Weight: 6.8 kg Weight: 4 kg ...... 53747 ...... 32805 ...... 63159 8 m, grey, Edge slider CleWa 50 kN Carrying box * bearing strength 4,000 kg. Side plates of specially shaped steel for T 532, of steel plate, lockable, with ...... 53749 plate St 37, teflon coated sliding 4 handles. bearing. Legs infinitely extensible Dim. (LxWxH): 760x280x450 mm 4 m, brown, 515 - 845 mm. Weight: 14 kg bearing strength 6,000 kg. Dim. (LxWxH): 486x298x230 mm ...... 63154 ...... 53746 Weight: 18.5 kg, with legs 24.3 kg ...... 32801

Some articles may not be available in * = not illustrated 28 specific countries. Details on request. Kap. 08-29 12.04.2005 14:21 Uhr Seite 1

RESCUE AND ENVIRONMENTAL PROTECTION

Vetter GmbH

® A Unit of IDEX Corporation P.O.Box 13 55 er D-53909 Zülpich tt Phone: +49 (0) 22 52 / 30 08-50 Fax: +49 (0) 22 52 / 30 08-70 Exp. Phone: +49 (0) 22 52 / 30 08-60 ve www.vetter.de [email protected]

Vetter is certified according to DIN EN ISO 9001 – for your safety Please ask for our catalogue Kap. 08-30 12.04.2005 14:23 Uhr Seite 30

LIFTING BAGS

VETTER lifting bags 1.0 bar and 63523 accessories For more than two decades these rugged cushion-like lifting bags have stood the toughest of tests in rescue work by the fire brigades and rescue services. Due to new improved materials these lifting bags are now available with a max. working pressure of 1 bar. This means that one and the same model has now twice the lifting 58861 power. The 1.0 bar lifting bags comply 58769 with DIN 14152-1 and have been type- tested. 58864 Lifting bags of types 1/23, 1/13, 1/9 and 1/6 are made of highly tear-resistant, neoprene-coated kevlar/aramide fabric, Set of lifting bags type 1/13 Compr.-air cylinder 4 l/200 bar oil and petrol resistant. Working DIN 14152, LH 30 S. Ø: 115 mm pressure1.0 bar. Top and bottom are 13 t, lift 620 mm, Ø 910 mm, Length incl. valve: 585 mm insensitive to loads with sharp edges. insertion height (uninflated) 30 mm. Weight: 6.1 kg (filled) Special inside distance holders give Basic equipment consisting of: ...... 58861 the lifting bag inherent stability. -2 lifting bags type 1/13 Only 30 mm gap required to slide the -1 packing/carrying bag Compr.-air cylinder 6 l/300 bar bag in. With fixing loops and hose -2 fill hoses at 5 m / 19 mm I.D. (steel) connection socket with claw coupling. with claw couplings Ø: 140 mm -1 dual fitting control unit 1.0 bar Length incl. valve: 605 mm Attention: -1 pressure reducer 200/300 bar Weight: 11.5 kg (filled) DIN 14152-1 specifies compressed- -repair kit ...... 58769 air cylinders for filling the lifting Weight: 40 kg bags. These cylinders are not ...... 63523 Compr.-air cylinder 10 l/200 bar included in the following basic Ø: 170 mm equipment. Please see art. Nos. Set of lifting bags type 1/9 * Length incl. valve: 675 mm 58861, 58769, 58864, 63274 and DIN 14152, LH 20 S. Weight: 13.6 kg (filled) 63336. 9 t, lift 600 mm, Ø 760 mm, ...... 58864 insertion height (uninflated) 30 mm. Set of lifting bags type 1/23 * Basic equipment consisting of: DIN 14152, LH 50 S. -2 lifting bags type 1/9 08 22.6 t, lift 1100 mm, Ø 1200 mm, -1 packing/carrying bag 63274 insertion height (uninflated) 30 mm. -2 fill hoses at 5 m / 19 mm I.D. Basic equipment consisting of: with claw couplings -2 lifting bags type 1/23 -1 dual fitting control unit 1.0 bar -1 packing/carrying bag -1 pressure reducer 200/300 bar -2 fill hoses at 5 m / 19 mm I.D. -repair kit with claw couplings Weight: 35 kg -1 dual fitting control unit 1.0 bar ...... 63524 63336 -1 pressure reducer 200/300 bar -repair kit Set of lifting bags type 1/6 * Weight: 59 kg DIN 14152, LH 10 S...... 63522 5.8 t, lift 450 mm, Ø 610 mm, insertion height (uninflated) 30 mm. Basic equipment consisting of: -2 lifting bags type 1/6 Collector 200 bar -1 packing/carrying bag for simultaneous use of 2 compr.-air -2 fill hoses at 5 m / 19 mm I.D. cylinders of 200 bar. with claw couplings Weight: 0.8 kg -1 dual fitting control unit 1.0 bar ...... 63274 -1 pressure reducer 200/300 bar -repair kit Collector 300 bar Weight: 29 kg for simultaneous use of 2 compr.-air ...... 63525 cylinders of 300 bar. Weight: 0.8 kg ...... 63336

Some articles may not be available in * = not illustrated 30 specific countries. Details on request. Kap. 08-31 12.04.2005 14:23 Uhr Seite 31

LIFTING BAGS MINI LIFTING BAGS

VETTER mini lifting bags 8 bar, 63516 steelcord reinforced 63312 Powerful lifters of the heaviest of loads, for forcing doors open, for freeing persons trapped under heavy loads, etc. Very high capacity, standard height only 25 mm. Can be used on any slope, anti-slip profiled surface. Safety: Safety tested and licenced by 63315 58769 official safety authorities (TÜV-Rhein- land), GS ”safety-tested” emblem. 63305 Mini lifting bag V 10 * 63297 9.6 t, lift 203 mm, insertion height (uninflated) 25 mm. Set of lifting bags 1.0 bar (Bavaria) Dim. (LxW): 370x370 mm Mini lifting bag V 31 * 13 t, lift 620 mm, Weight: 5 kg 31.4 t, lift 370 mm, consisting of: ...... 63306 insertion height (uninflated) 25 mm. -2 lifting bags type 1/13 Dim. (LxW): 650x690 mm -1 packing bag with 8 hand loops Mini lifting bag V 12 * Weight: 17 kg -3 fill hoses at 5 m 12 t, lift 200 mm, ...... 63311 -1 transport case DIN 14880, RAL 7003 insertion height (uninflated) 25 mm. -1 pressure reducer 200/300 bar Dim. (LxW): 320x520 mm Mini lifting bag V 40 -1 dual fitting control unit 1.0 bar Weight: 6 kg 39.6 t, lift 402 mm, -1 triple collector 3x200 bar ...... 63307 insertion height (uninflated) 25 mm. -3 compressed-air cylinders Dim. (LxW): 780x690 mm 4 l/200 bar Mini lifting bag V 18 * Weight: 20 kg -repair kit 17.7 t, lift 270 mm, ...... 63312 Dim. of transport case (LxWxH): insertion height (uninflated) 25 mm. 700x400x260 mm Dim. (LxW): 470x520 mm Mini lifting bag V 54 * Weight: 52 kg Weight: 8.5 kg 54.4 t, lift 478 mm, ...... 63516 ...... 63308 insertion height (uninflated) 25 mm. Dim. (LxW): 860x860 mm Set of lifting bags 1.0 bar (Bavaria) * Mini lifting bag V 24 * Weight: 25.5 kg as art. No. 63516, 24 t, lift 306 mm, ...... 63313 but with 2 compressed-air cylinders insertion height (uninflated) 25 mm. 6 l/300 bar and collector 300 bar with Dim. (LxW): 520x620 mm Mini lifting bag V 68 * 08 connecting bridge. Weight: 12 kg 67.7 t, lift 520 mm, Weight: 56 kg ...... 63309 insertion height (uninflated) 25 mm...... 63517 Dim. (LxW): 950x950 mm Mini lifting bag V 24 L * Weight: 38.5 kg 24 t, lift 201 mm, ...... 63314 insertion height (uninflated) 25 mm. Dim. (LxW): 310x1020 mm Weight: 11.5 kg Further descriptions of above ...... 63310 articles on page 32.

* = not illustrated Some articles may not be available in specific countries. Details on request. 31 Kap. 08-32 12.04.2005 14:22 Uhr Seite 32

ACCESSORIES FOR MINI LIFTING BAGS

Sets of mini lifting bags 63297 63304 System 393 kN * consisting of: -1 mini lifting bag each of type V 10, V 12, V 18 -1 yellow fill hose of 5 m -1 red fill hose of 5 m -1 pressure reducer 200/300 bar -1 dual deadman control unit 8 bar in synthetic housing Weight: 26.4 kg ...... 63302 63305 System 873 kN * consisting of: -1 mini lifting bag each of type V 10, Pressure reducer 200/300 bar Fill hose 5 m, yellow V 12, V 18, V 24, V 24 L with connecting hose of 2 m and 9 mm I.D., with safety couplings. -1 yellow fill hose of 5 m nipple plug, 2 manometers, safety Weight: 0.8 kg -1 red fill hose of 5 m valve...... 63304 -1 pressure reducer 200/300 bar Weight: 1.5 kg -1 dual deadman control unit 8 bar ...... 63297 Fill hose 5 m, red in synthetic housing 9 mm I.D., with safety couplings. Weight: 49.9 kg Weight: 0.8 kg 63303 ...... 63301 ...... 63305

System 2804 kN * Fill hose 10 m, yellow * consisting of: 9 mm I.D., with safety couplings. -1 mini lifting bag each of type V 10, Weight: 1.4 kg V 12, V 18, V 24, V 24 L, V 31, V 40, ...... 63323 V 54, V 68 -1 yellow fill hose of 5 m Fill hose 10 m, red * -1 red fill hose of 5 m 9 mm I.D., with safety couplings. -1 pressure reducer 200/300 bar Weight: 1.4 kg -1 dual deadman control unit 8 bar ...... 63324 in synthetic housing Weight: 150.9 kg Compressed-air cylinder 4 l/200 bar 08 ...... 63300 Ø: 115 mm Length with valve: 585 mm Collector 200 bar Dual deadman control unit 8 bar Weight: 6.1 kg (filled) for simultaneous use of In housing of synthetic material, for ...... 58861 2 compressed-air cylinders 200 bar. connecting to and control of 2 mini Weight: 0.8 kg lifting bags. Compressed-air cylinder 6 l/300 bar ...... 63274 Weight: 3.8 kg (steel) ...... 63303 Ø: 140 mm Collector 300 bar Length with valve: 605 mm for simultaneous use of Single fitting control unit 8 bar Weight: 11.5 kg (filled) 2 compressed-air cylinders 300 bar. with ball valve, safety valve and ...... 58769 Weight: 0.8 kg manometer...... 63336 (Illustrated on page 31.) Compressed-air cylinder Weight: 2 kg 10 l/200 bar Mini lifting bags 8 bar, ...... 63315 Ø: 170 mm ARAMIDE/KEVLAR reinforced, Length with valve: 675 mm on request. Dual fitting control unit 8 bar * Weight: 13.6 kg (filled) with 2 ball valves, 2 safety valves and ...... 58864 Illustrations of art. Nos. 63274, 2 manometers. 63336, 58861, 58769 and 58864 Weight: 3 kg on page 30...... 63319

Some articles may not be available in * = not illustrated 32 specific countries. Details on request. Kap. 08-33 12.04.2005 14:22 Uhr Seite 33

ACCESSORIES FOR MINI LIFTING BAGS SUPER-MINI LIFTING BAGS

63575 63527

Set of adaptors VETTER super-mini lifting bags for connection of the various 8 bar compressed-air sources to the for use in hand-size gaps where control unit. standard lifting bags or spreaders Consisting of: are unsuitable. -truck compressed-air connection Material: Aramide reinforcements -blank cap -truck tyre inflator adaptor Set of super-mini lifting bags -truck tyre valve 8 bar with foot pump -truck tyre valve connection consisting of: -compressed-air mains -1 super-mini lifting bag each of type -green air supply hose of 10 m V 1, V 3, V 6 -green air supply hose of 10 m with -1 yellow fill hose of 5 m shut-off -1 foot pump with safety valve 8 bar -bag for adaptors -manometer Weight: 5 kg -yellow transport case ...... 63575 Dim. (LxWxH): 600x400x135 mm Weight: 9.8 kg Hand pump * ...... 63527 520 cm3 per stroke, incl. 2 m of air hose, with coupling nipple. Set of super-mini lifting bags ...... 63298 8 bar for compressed-air inflation * 08 consisting of: Foot pump * -1 super-mini lifting bag each of type 420 cm3 per stroke, incl. 2 m of air V 1, V 3, V 6 hose, with coupling nipple. -1 yellow fill hose of 5 m ...... 63299 -1 inflation distributor with 2 yellow fill hoses at 1 m Tension and extension belt * -inflation and safety device (rescue belt), -pressure reducer with safety valve 10 m, orange, with ratchet of 50 mm, 8 bar traction 4000 kg. -manometer Weight: 2.6 kg -compressed-air cylinder 1 l/200 bar ...... 63920 -yellow transport case Dim. (LxWxH): 600x400x135 mm Weight: 10.8 kg ...... 63526

* = not illustrated Some articles may not be available in specific countries. Details on request. 33 Kap. 08-34.fh8 12.04.2005 16:05 Uhr Seite 1 Kap. 08-35 12.04.2005 14:31 Uhr Seite 35

HYDRAULIC RESCUE EQUIPMENT WEBER

Spreaders and accessories 56248 56178 Please note: DIN 14751-1 specifies the following accessories for the spreader: 2pairs of protective 5-finger leather gloves (art. No. 92774) 2visors - for helmet - (art. No. 51181) 1rescue knife with leather pouch (art. Nos. 61545 + 55257) 1knobbed rescue knife with leather pouch (art. Nos. 61544 + 55256) 1set of replacement tips, type depending on type of spreader 1supporting block of hardwood (art. No. 56198) 1chain set with connectors, type Chain set Spreader SP 40 depending on type of spreader for SP 30 LS/Vario SPS 330/330 L/ WEBER, 1can of hydraulic oil, 1 l 330 A/RZ 1-3/SP 35/SP 35 ”A”, type approv. No. SP 32-95-TP 18. (art. No. 56190) consisting of: Cylinder body and arms of high- -2 chain locks strength aluminium alloy with Please order these parts if not -2 pulling chains 1.8 m long wear-resistant finish. Space-saving available already. with a hook slimline shape. The length of chains can easily be 2 handles, one of which is hinged for adjusted through a push-button use as a carrying handle. Tips with 56097 system at the chain lock. In this way integrated paring function. With yellow no hooking/unhooking is needed. ultra-high-pressure hose pair of 0.5 m Weight: 7.9 kg with quick-stop safety couplings...... 56248 Spreading force at tips: 48 to 60 kN Spreading force in working range: Replacement tips * 48 to 118 kN (Pair) for SP 35, SP 35 ”A” and Pulling force: 48 kN SP 30 LS, without bolts. Opening: 710 mm Weight: 0.8 kg Working pressure: 630 bar ...... 56143 Weight: 20.3 kg ...... 56178 Supporting block * for spreader, of hardwood. Chain set * 08 Dim. (LxWxH): 300x120x40 mm for SP 40 and SP 50, Weight: 1 kg consisting of: Spreader SP 35 ...... 56198 -2 chain locks WEBER, -2 pulling chains 1.8 m long DIN 14751-1 (DIN SP 30), with a hook tested by TÜV (techn. inspection org.). The length of chains can easily be Arms are of high-quality tempered tool adjusted through a push-button steel and can be loaded over their system at the chain lock. In this way entire length. Serrated arms for no hooking/unhooking is needed. squeezing (up to 85 kN). 2 handles, Weight: 13.8 kg one of which is hinged for use as a ...... 56180 carrying handle. Tips with integrated paring function. With yellow ultra-high- Replacement tips * pressure hose pair of 0.5 m with quick- (Pair) for SP 40, without bolts. stop safety couplings. Weight: 1.6 kg Spreading force in working range: ...... 56179 35 to 105 kN Pulling force: 35 kN Opening: 620 mm Working pressure: 630 bar Weight: 18.2 kg ...... 56097

* = not illustrated Some articles may not be available in specific countries. Details on request. 35 Kap. 08-36 12.04.2005 14:30 Uhr Seite 36

HYDRAULIC RESCUE EQUIPMENT WEBER

56183 61547 56185

Spreader SP 50 Glass-saw ”GLAS-Ex” Door opening kit WEBER, WEBER, WEBER, DIN 14751-1, fast and safe manually operated tool to complete equipment for rapid forcible type approv. No. SP 37-96-TP 18. remove laminated windscreens, incl. entry, for lifting heavy objects, The powerful one for heavy rescue. centre punch for standard side windows. (concrete slabs, steel beams, etc.) or Reduced weight due to use of Weight: 1.7 kg ...... 61547 for special spreading operations. lightweight, aerospace developed Consisting of: materials. Arms and cylinder body of Replacement blade for ”GLAS-Ex” * -hydraulic door opening tool high-strength aluminium alloy with Weight: 0.1 kg ...... 61552 -hand pump, hydraulic hose of 3 m wear-resistant finish. Well balanced. -door strap, utility bar 380 mm 2 handles, one of which is hinged for Centre punch * -dead-blow hammer 1.4 kg use as a carrying handle. Tips with WEBER, 120 mm long, for safe -transport case integrated paring function. With yellow removal of safety glass. Max. spreading force: 89 kN ultra-high-pressure hose pair 0.5 m ...... 56176 Max. spreading distance: 105 mm with quick-stop safety couplings. Max. working pressure: 720 bar Spreading force at tips: 55 to 75 kN Replacement blade for ”Glasmaster” * Dim. (LxWxH): 480x410x180 mm Spreading force in working range: Weight: 0.1 kg ...... 61548 Weight: 16 kg 55 to 140 kN ...... 56185 Pulling force: 58 kN 61553 Opening: 815 mm 56528 Working pressure: 630 bar 08 Weight: 23.8 kg ...... 56183

Supporting block * for spreader, of hardwood. Dim. (LxWxH): 300x120x40 mm Weight: 1 kg ...... 56198

Chain set * for SP 40 and SP 50, consisting of: -2 chain locks -2 pulling chains at 1.8 m with a hook Glass management The length of chains can easily be WEBER, Airbag protection adjusted through a push-button complete kit to assist in the safe WEBER, system at the chain lock. In this way removal of all tempered and laminated for protection of emergency service no hooking/unhooking is needed. glass for protection of injured persons. personnel and injured persons from an Weight: 13.8 kg Contents: glass-saw GLAS-EX, centre undischarged airbag. Suitable for all ...... 56180 punch, rescue blade, adhesive tape motor cars. Design: bounce plate of dispenser, protective goggles, steel plate, with brackets and Replacement tips * 2 rescue foils, transport case. adjustable spring-loaded retaining clip. (Pair) for SP 50, without bolts. Dim. (LxWxH): 440x310x100 mm Weight: 3.7 kg...... 56528 Weight: 1.8 kg Weight: 5 kg ...... 56184 ...... 61553 Further airbag safety systems please see page 51.

Some articles may not be available in * = not illustrated 36 specific countries. Details on request. Kap. 08-37 12.04.2005 14:30 Uhr Seite 37

HYDRAULIC RESCUE EQUIPMENT WEBER

Cutters and accessories 56252 56560 Please note: DIN 14751-2 specifies the following accessories for the cutter: 2pairs of protective 5-finger leather gloves (art. No. 92774) 1rescue knife with leather pouch (art. Nos. 61545 + 55257) 1knobbed rescue knife with leather pouch (art. Nos. 61544 + 55256) 1pair of replacement blades, type depending of type of cutter (on request)

Please order these parts if not available already. Cutter S 180 Cutter S 50 WEBER, DIN 14751-2 (S 150), WEBER, type approv. No. S 38-94-TP 18. compact light-weight tool for use in 56233 Optimum force and max. opening confined spaces for cutting e.g. width for extreme operations e.g. for pedals, steering wheels and lattice side-impact bars, door and roof posts bars. Safety switch complying with and door sills. Curved blades as type DIN 14751. Cylinder body and housing S 140. Opening 185 mm, max. cutting of high-strength aluminium alloy with capacity (round steel bar) 30 mm, wear-resistant surface. With red working pressure 630 bar. ultra-high-pressure hose pair of 0.5 m Weight: 13.5 kg ...... 56252 with quick-stop safety couplings. Opening: 50 mm Replacement blades * Max. cutting capacity: (Pair) for S 180. 16 mm (round steel bar), Weight: 4.6 kg ...... 56253 flat steel 40x5 mm Working pressure: 630 bar Weight: 4.5 kg 56327 ...... 56560 Cutter S 140 WEBER, DIN 14751-2, Upper blade for cutter S 50 type approv. No. S 14-88-TP 18. Weight: 0.3 kg New blade design with larger opening...... 56561 08 Improved cutting performance. Cylinder body and housing of high- Lower blade for cutter S 50 strength aluminium alloy with wear- Weight: 0.3 kg resistant surfaces. Curved blades ...... 56562 clasp the material to be cut, serrated blades hold the material and improve the cutting. Re-sharpenable blades of 56562 56561 high quality quenched and tempered tool steel with notch for cutting round bars. Removable 360º adjustable handle. With red ultra-high-pressure Cutter S 260 hose pair of 0.5 m with quick-stop WEBER, DIN 14751-2, safety couplings. type approv. No. S-01-2000-TP 18. Opening: 140 mm Tested acc. to DIN, prEN and NFPA. Max. cutting capacity (round steel bar): For the toughest of operations. Cutting 22 mm capacity (round steel bar): Ø 32 mm. Working pressure: 630 bar With curved re-sharpenable blades of Weight: 9.1 kg high quality quenched and tempered ...... 56233 tool steel with notch for cutting round bars. Removable 360º adjustable Replacement blades * handle. Ergonomic handling for right- (Pair) for S 140. and left-handed persons. Replacement blades (pair) Weight: 2.2 kg Opening: 260 mm for cutter S 260 * ...... 56234 Weight: 14.9 kg Weight: 5.4 kg ...... 56327 ...... 56328

* = not illustrated Some articles may not be available in specific countries. Details on request. 37 Kap. 08-38 12.04.2005 14:29 Uhr Seite 38

HYDRAULIC RESCUE EQUIPMENT WEBER

Hand pump DPH 3215 SA * 56020 56036 WEBER, DIN 14751-2. Mainly used for operating the cutters when no other energy sources are available. In emergency situations (e.g. power supply failure) the hand pump can also be used for spreaders. In that case longer work times have to be considered! Two-stage version for high and low pressure. Functions even when under extreme inclination (up to 30º). With red ultra-high-pressure hose pair of 0.5 m with quick-stop safety couplings. Mounted on a wooden board. Weight: 12.5 kg Combi tools and accessories Combi tool Super-Vario SPS 400 ...... 56226 WEBER, Hydraulic rescue tool with ultra-high-pressure hoses of VARIO SPS 330 L 0.5 m and couplings. 19260 WEBER, DIN 14751-2 (S 90), Cutting capacity (round steel bar): type approv. No. S 48-98-TP 18. 35 mm Versatile combi tool for cutting, Spreading force in working range: spreading, pushing and pulling. Blades 48 to 726 kN (arms) of high quality quenched and Pulling force: 65 kN tempered tool steel with notch for Opening: 425 mm cutting round bars. Cylinder body and Pulling distance: 404 mm housing of high strength aluminium Working pressure: 630 bar alloy with wear-resistant surface. Weight: 18.2 kg Removable 360º adjustable handle...... 56036 With red ultra-high-pressure hose pair of 0.5 m with quick-stop safety Pulling device for Super-Vario couplings. SPS 400 * Spreading force at the tips: 36 to 45 kN 2 pcs. required. Max. cutting capacity (round steel bar): Weight: 1.4 kg (per piece) Sill support 25 mm ...... 56039 Safe and simple. Just push - automati- Spreading force in working range: 08 cally adjusted. 36 to 90 kN Replacement blade for Super-Vario Dim. (LxWxH): 550x80x280 mm Pulling force: 32 kN SPS 400 * Weight: 6 kg Opening: 330 mm Weight: 2.7 kg (per piece)...... 56037 ...... 19260 Pulling distance: 400 mm Working pressure: 630 bar Replacement tip for Super-Vario Transport case * Weight: 13 kg SPS 400 * Wood, DIN 14880-1 H, for cutter, hand ...... 56020 Weight: 0.8 kg (per piece)...... 56038 pump and 1 pair of replacement blades. Yellow with marking. Pulling device * Hand-Vario SPS 250-H * Dim. (LxWxH): 700x400x220 mm for VARIO SPS 330 L and SPS 330 A, WEBER, Weight: 9 kg incl. pivot pin, for attaching the chain manually powered compact universal ...... 56227 set. tool for cutting and spreading. Cutting 2 pcs. required! blades (arms) of high quality tempered Transport case * Weight: 1.4 kg (per piece) tool steel with special cutter for round Synthetic material, for accessories (re- ...... 56021 steel bars. Cylinder body of aluminium. placement tips, replacement blades, Spreading force: 83 kN chains, etc.). Replacement blades (arms) * Cutting capacity: 220 kN Dim. (LxWxH): 425x300x110 mm for VARIO SPS 330 L and SPS 330 A. Opening: 250 mm Weight: 1.6 kg Weight: 2.4 kg (per piece) Working pressure: 630 bar ...... 56148 ...... 56022 Weight: 10.4 kg ...... 56279

Replacement blade (arm) * for Hand-Vario SPS 250-H. Weight: 1.5 kg (per piece) ...... 56284

Some articles may not be available in * = not illustrated 38 specific countries. Details on request. Kap. 08-39 12.04.2005 14:28 Uhr Seite 39

HYDRAULIC RESCUE EQUIPMENT WEBER

Power unit E 50-T + SAH 20, 57006 2-circuit version Complying with EN 13204. With electric motor 230 V/50 Hz, 1.3 kW and 2 pairs of ultra-high- pressure hoses at 20 m for simultaneous operation. With 56281 integrated coiling device and brake. Dim. (LxWxH): 806x440x473 mm Weight: 73 kg ...... 57006 56282 Compact power units Light-weight, silent compact power units for WEBER rescue tools. Comply with DIN, except for the supporting WEBER power units frame. TÜV Stuttgart (official safety Type V 330 authority) has issued a certificate of with 4-stroke petrol engine, 2-stage, Power unit E 50-T - DIN * nonobjection. The units function even 1.3 kW, operating pressure 630 bar, DIN 14751. With 2 pairs of ultra-high- when under extreme inclination oil volume 2 l. Fully ready for use with pressure hoses at 5 m, red and yellow, (up to 30º). Solid supporting frame. ultra-high-pressure hose pair of with quick-stop safety couplings and Particularly suitable for VARIO 5 m, on both ends with quick-stop pressure relief plug. For connection of SPS 330 ”L”. safety couplings. With pressure relief 2 pieces of equipment (e.g. spreader plug. and cutter) for alternative operation. Dim. (LxWxH): 355x310x337 mm 56275 With DIN-frame and electric motor Weight: 22 kg 230 V/50 Hz, 1.3 kW...... 56281 Dim. (LxWxH): 500x440x473 mm Weight: 44 kg Distribution valve ...... 57000 for connection of 2 pieces of equipment. Power unit E 50-T, 2-circuit version * Dim. (LxWxH): 280x136x195 mm Complying with EN 13204. With Weight: 4 kg 2 pairs of ultra-high-pressure hoses ...... 56282 at 5 m. For connection of 2 pieces of equipment for simultaneous operation. With electric motor 230 V/50 Hz, 1.3 kW. 08 Dim. (LxWxH): 500x440x473 mm Weight: 44 kg ...... 57004 Type E 330 L with electric motor 230 V/50 Hz, Hydraulic power units 0.5 kW, operating pressure 630 bar, with mounted hose reel oil volume 2 l. Fully ready for use with For 2 pairs of ultra-high-pressure red ultra-high-pressure hose pair of hoses at 20 m, red and yellow, with 5 m, on both ends with quick-stop quick-stop safety couplings. For safety couplings. With pressure relief connection of 2 pieces of equipment plug. (e.g. spreader and cutter) for alternative Dim. (LxWxH): 355x310x337 mm operation. With pressure relief plug. Weight: 23 kg ...... 56275 Power unit E 50-T + SAH 20 - DIN * Complying with DIN 14751. With electric motor 230 V/50 Hz, 1.3 kW and 2 pairs of ultra-high-pressure hoses at 20 m for alternative operation. With integrated coiling device and brake. Dim. (LxWxH): 806x440x473 mm Weight: 73 kg ...... 57002

* = not illustrated Some articles may not be available in specific countries. Details on request. 39 Kap. 08-40 12.04.2005 14:27 Uhr Seite 40

HYDRAULIC RESCUE EQUIPMENT WEBER

57008 173798 56462

56460

Two-part bracket for power unit Accessories for power units mann-mobil rescue tools E-50 T for spreader/cutter and accessories with safety gripper Two-part holding device for Rescue tools with integrated battery- Weight: 2.1 kg WEBER spreader and cutter on powered electronic drive, 12 Volt DC...... 57008 power unit E 45 and E 50 Ready for immediate use, flexible and of steel, galvanized, for the following with unrestricted radius of operation. Supplementary set, equipment combinations: Space and weight saving and therefore gripper for spreader and cutter * they can also be transported in small Two grippers and fixing material. SP 40/SP 50 + S 140/S 150, vehicles...... 57009 SP 45 + S 90/S 150, SP 30 L + S 90/S 150 Spreader SP 35 ”A” Two-part bracket for spreader and Weight: 2.1 kg * WEBER, cutter ...... 173797 electro-hydraulic spreader for versatile without safety gripper * use (DIN SP 30). Complying with (Old version). SP 30 LS + S 90/S 140/S 150 DIN 14751, 1-4. Weight: 2.1 kg Weight: 2.1 kg Without energy pack...... 57010 ...... 173798 Spreading force at the tips: 30 to 40 kN Coiling device with crank * SP 40/SP 50 + S 180/SPS 330, Spreading force in working range: for double hose reel SAH 20 and HF 20. SP 30 L/SP 45 + SPS 330/S 180, 34 to 105 kN Weight: 3.2 kg S 260 Pulling force: 35 kN 08 ...... 56346 Weight: 2.1 kg * Spreading distance: 615 mm ...... 173799 Working pressure: 720 bar Weight: 22 kg SP 30 LS/SPS 330 + S 180 ...... 56460 Weight: 2.1 kg * ...... 173800 Replacement arm * for SP 35 ”A”. Weight: 2 kg ...... 56468

Energy pack EZ 12/17 12 Volt/17 Ah. Leak-proof, position-insensitive lead battery with control module for controlling and monitoring purposes. Total discharge protection with a buzzer. One charge provides sufficient power for at least 40 spreading operations or 80 cutting operations. Shoulder bag as well as shoulder and body belt are provided. Weight: 7 kg ...... 56462

Some articles may not be available in * = not illustrated 40 specific counties. Details on request. Kap. 08-41 12.04.2005 14:26 Uhr Seite 41

HYDRAULIC RESCUE EQUIPMENT WEBER

Cutter S 140 ”A” * 56463 WEBER, 56462 electro-hydraulic cutter for versatile use (DIN S 90). Complying with DIN 14751, 2-4, type approv. No. 49-98 TP 18. Without energy pack. Opening: 140 mm Max. cutting capacity (round steel bar): 22 mm Cutting force: 110 kN Working pressure: 630 bar Weight: 13.5 kg 56575 ...... 56461

Replacement blade * Cutter 180 ”A” for S 140 ”A”. Battery charger NLG 110/230 V WEBER, Weight: 1 kg (per piece) Nominal charging current 4.5 A, complying with DIN 14751-4...... 56469 electronic. For simultaneous and Electro-hydraulic cutter for versatile independant charging of 2 batteries. use. Replacement battery * EMV approved up to 1 GHz. Without energy pack. 12 Volt/17 Ah. Weight: 9 kg Opening: 180 mm Weight: 6 kg ...... 56463 Cutting capacity (round steel bar): ...... 56470 30 mm On-board charging station Weight: 18.7 kg Chain set * BLS 12/24 V * ...... 56575 for SP 30 LS/Vario SPS 330/330 L/ Nominal charging current 4.5 A, for 330 A/RZ 1-3/SP 35/SP 35 A, charging in vehicles. Replacement blades consisting of: As art. No. 56463. for S 180 und S 180 ”A” * -2 chain locks Weight: 4.8 kg (Pair). -2 pulling chains at 1.8 m with hook ...... 56464 Weight: 4.6 kg Length of chains can easily be ...... 56253 adjusted through push-button system on the chain-lock. In this way Combi-tool VARIO SPS 330 A * no hooking/unhooking is needed. WEBER, Weight: 7.9 kg battery-powered, for cutting, ...... 56248 spreading and pulling. 08 Without energy pack. Pulling device * Spreading force: 40 to 90 kN for VARIO SPS 330 L and SPS 330 A, Cutting capacity (round steel bar): with pivot pin for attaching the chain 25 mm set to the cutter blades (arms). Pulling force: 32 kN 2 pcs. required! Spreading distance: 330 mm Weight: 1.4 kg (per piece) Pulling distance: 400 mm ...... 56021 Weight: 17 kg ...... 56472 Replacement blades * for VARIO SPS 330 L and SPS 330 A (arms). Weight: 2.4 kg (per piece) ...... 56022

* = not illustrated Some articles may not be available in specific countries. Details on request. 41 Kap. 08-42 12.04.2005 14:26 Uhr Seite 42

HYDRAULIC RESCUE EQUIPMENT WEBER

Rescue cylinders and accessories Chain set for RZ 1 - 3 56383 art. No. 56248, please see page 35! Please note: DIN 14751-3 specifies the following Adaptor for chain set RZ 1 - 3/ accessories for rescue cylinders: SP 30 LS/Vario SPS L + SP 35 * 2leaf sights - for helmet (2 pcs. required). (art. No. 51181) Weight: 0.7 kg 1 set of pushing heads ...... 56378 (art. No. 56360) 1can of hydraulic oil, 1 l Pushing head * (art. No. 56190) for RZ 1 - 3 (without pivot pin). Weight: 0.5 kg Please order these parts if not ...... 56360 available already. Set of accessories for rescue Rescue cylinder, double-acting cylinder RZ 1 - 3 * WEBER, Different pushing heads (5 pcs.) to Telescopic rescue cylinder DIN 14751-3 (RZ 1 - 3), optimize the use of rescue cylinders. type RZT 2-1370 type approv. No. SRZ 2-92-TP 18. With storage box. Type approv. No. RZ 12-96-TP 18. The perfect addition to your rescue Dim. (LxWxH): 425x300x110 mm Pushing force: equipment when the spreading Weight: 6.5 kg 1st stage 120 kN distances are insufficient. For pushing, ...... 56361 2nd stage 67 kN lifting and for pulling with chains. Closed length: 650 mm Pushing force 120 kN, pulling force Telescopic rescue cylinders Piston stroke: 720 mm 29 kN, working pressure 630 bar. double-acting Extended length: 1370 mm With yellow ultra-high-pressure hoses WEBER, DIN 14751-3. Working pressure: 630 bar of 0.5 m with quick-stop safety Weight: 18.8 kg couplings. Please note: Telescopic rescue ...... 56383 cylinders cannot be used for pulling!! 56379 Telescopic rescue cylinder type RZT 2-750 * Type approv. No. RZ 09-2002-TP 18. Double-acting, with ultra-high- 56377 pressure hoses of 0.5 m and couplings. Pushing force: 1st stage 189.4 kN 08 56376 2nd stage 99 kN Closed length: 393 mm Piston stroke: 358 mm Extended length: 750 mm 56375 Weight: 12.9 kg ...... 56563

Extension for telescopic rescue Rescue cylinder type RZ 3-1600 cylinder RZT 2-750 * Sill-support Closed length 1100 mm, piston stroke Extension 250 mm (opening up to WEBER, 500 mm, extended length 1600 mm. 1000 mm). the sill-support stabilizes the sill and Weight: 18.5 kg Weight: 3.4 kg the B-column and prevents cylinder ...... 56377 ...... 56564 breakthrough. The sill is not pushed out of way. The graduations in the sill- Rescue cylinder type RZ 2-1250 Telescopic rescue cylinder support ensure optimum use of the Closed length 750 mm, piston stroke type RZT 2-1065 * cylinder piston stroke. The perfect 500 mm, extended length 1250 mm. Type approv. No. RZ 13-97-TP 18. addition to the rescue cylinders. Weight: 16 kg Pushing force: Dim. (LxWxH): 510x200x100 mm ...... 56376 1st stage 170 kN Weight: 10 kg 2nd stage 89 kN ...... 56379 Rescue cylinder type RZ 1-850 Closed length: 540 mm Closed length 530 mm, piston stroke Piston stroke: 525 mm 320 mm, extended length 850 mm. Extended length: 1065 mm Weight: 12.5 kg Working pressure: 630 bar ...... 56375 Weight: 16.1 kg ...... 56409

Some articles may not be available in * = not illustrated 42 specific countries. Details on request. Kap. 08-43 12.04.2005 14:47 Uhr Seite 43

HYDRAULIC RESCUE EQUIPMENT WEBER

63215 63208 63238

63293

Hydraulic lifting device BÜFFEL Hydraulic bottle jacks 56527 WEBER, WEBER reliable lifting appliance, can be used in any position, adjustable lifting claw Hydraulic bottle jack (4-6 positions). With spherical base. type AT 5-215 * Lifting force: 5000 kg BÜFFEL B 5 Construction height: 215 mm Permissible load: 5000 kg Hydraulic lifting height: 305 mm Construction height: 660 mm Max. total height: 520 mm Piston stroke: 280 mm Weight: 6.3 kg Weight: 28 kg ...... 63273 ...... 63215 Hydraulic bottle jack BÜFFEL B 10 * type ATG 10-200 Permissible load: 10000 kg Lifting force: 10000 kg Construction height: 800 mm Construction height: 200 mm Piston stroke: 350 mm STAB-FAST stabilization system Hydraulic lifting height: 262 mm Weight: 40 kg WEBER, Max. total height: 530 mm ...... 63217 the universal vehicle stabilization Weight: 8.8 kg system for all types of cars, small ...... 63238 Bearing plate buses and truck cabs. Fast and easy for B 5 and B 10. set-up. Even in demanding situations 08 Weight: 1.8 kg vehicles are stabilized within a few ...... 63293 minutes so that the rescue work can take place without obstructions. Hydraulic lifting sets H 1 and H 2 Contents: WEBER, - 3 struts consisting of single-acting hydraulic - 3 straps cylinders with a lifting power of 80 and - 1 wedge 150 kN, hand pumps and accessories. - 3 hooks DIN 14800-6. - 2 bags Length of strut: 1080 mm Lifting set H 1 Total weight: 39.6 kg consisting of 2 wooden boxes ...... 56527 with 32 parts. Dim. of 1 box (LxWxH) : 700x400x220 mm Weight: 98 kg ...... 63208

Lifting set H 2 * consisting of 1 wooden box with 21 parts. Dim. (LxWxH): 700x400x220 mm Weight: 62 kg ...... 63207

* = not illustrated Some articles may not be available in specific countries. Details on request. 43 Kap. 08-44 12.04.2005 14:47 Uhr Seite 44

HYDRAULIC RESCUE EQUIPMENT REPLACEMENT ULTRA-HIGH-PRESSURE HOSES FOR WEBER RESCUE EQUIPMENT

Single hose 5 m, red * Extension hose pair 5 m, yellow * NW 6, nominal pressure 630 bar, with- NW 6, nominal pressure 630 bar, out couplings (M 18x1.5 + M 14x1.5/ vulcanized as pair, with couplings, 56010 56011 spanner size 22 + 19). oil filled. Weight: 1.3 kg Weight: 4 kg ...... 56030 ...... 56188

Ultra-high-pressure hose 5 m, Extension hose pair 5 m, red * yellow * NW 6, nominal pressure 630 bar, NW 6, nominal pressure 630 bar, vulcanized as pair, with couplings, vulcanized as pair, without couplings oil filled. (M 14x1.5 + M 18x1.5/ Weight: 4 kg spanner size 19 + 22)...... 56249 56181 56182 Weight: 2.8 kg ...... 56012 Extension hose pair 10 m, yellow * NW 6, nominal pressure 630 bar, Single hose 0.5 m, yellow Ultra-high-pressure hose 5 m, red * vulcanized as pair, with couplings, NW 6, nominal pressure 630 bar, with- NW 6, nominal pressure 630 bar, oil filled. out couplings (M 18x1.5 + M 12x1.5/ vulcanized as pair, without couplings Weight: 7.2 kg spanner size 22 + 17). (M 14x1.5 + M 18x1.5/ ...... 56024 Weight: 0.3 kg spanner size 19 + 22)...... 56010 Weight: 2.8 kg Extension hose pair 10 m, red * ...... 56013 NW 6, nominal pressure 630 bar, Single hose 0.5 m, red vulcanized as pair, with couplings, NW 6, nominal pressure 630 bar, with- Ultra-high-pressure hose 5 m, oil filled. out couplings (M 18x1.5 + M 12x1.5/ yellow * Weight: 7.2 kg spanner size 22 + 17). NW 6, nominal pressure 630 bar, ...... 56025 Weight: 0.3 kg vulcanized as pair, without couplings ...... 56011 (M 18x1.5 + M 18x1.5/ Extension hose pair 20 m, yellow * spanner size 22 + 22). NW 6, nominal pressure 630 bar, Sleeve for quick-stop safety Weight: 2.8 kg vulcanized as pair, with couplings, coupling type SKS 6/1 ...... 56014 oil filled. with safety plug. Weight: 13.4 kg Weight: 0.35 kg Ultra-high-pressure hose 5 m, red * ...... 56026 ...... 56181 NW 6, nominal pressure 630 bar, vulcanized as pair, without couplings Extension hose pair 20 m, red * Plug for quick-stop safety (M 18x1.5 + M 18x1.5/ NW 6, nominal pressure 630 bar, 08 coupling type SKS 6/2 spanner size 22 + 22). vulcanized as pair, with couplings, with safety cap. Weight: 2.8 kg oil filled. Weight: 0.18 kg ...... 56015 Weight: 13.4 kg ...... 56182 ...... 56027 Ultra-high-pressure hose 20 m, Safety cap for coupling plug * yellow * Please note: To prevent that the as replacement. NW 6, nominal pressure 630 bar, wrong hoses are supplied, please ...... 82215 vulcanized as pair, without couplings check the connection thread and (M 18x1.5 + M 18x1.5/ the spanner size respectively before Safety plug for coupling sleeve * spanner size 22 + 22). ordering! as replacement. Weight: 10.8 kg ...... 82216 ...... 56016 Hydraulic oil Single hose 2 m, yellow * Ultra-high-pressure hose 20 m, red * for WEBER rescue tools NW 6, nominal pressure 630 bar, with- NW 6, nominal pressure 630 bar, out couplings (M 18x1.5 + M 14x1.5/ vulcanized as pair, without couplings Hydraulic oil * spanner size 22 + 19). (M 18x1.5 + M 18x1.5/ 1 l, in tin can. Weight: 0.7 kg spanner size 22 + 22)...... 56190 ...... 56028 Weight: 10.8 kg ...... 56017 Hydraulic oil * Single hose 5 m, yellow * 5 l, in tin can. NW 6, nominal pressure 630 bar, with- ...... 56186 out couplings (M 18x1.5 + M 14x1.5/ spanner size 22 + 19). Hydraulic oil * Weight: 1.3 kg 10 l, in tin can...... 56029 ...... 56187

Some articles may not be available in * = not illustrated 44 specific countries. Details on request. Kap. 08-45 12.04.2005 14:46 Uhr Seite 45

HYDRAULIC RESCUE EQUIPMENT LUKAS

Spreaders and accessories Chain set KSS 20 56487 for LSP 60 EN/LSP 40 EN as well as Please note: for LSP 40 B + LSP 100 * DIN 14751-1 specifies the following consisting of 2 chains at 2.2 m with accessories for the spreader: hook and 2 patented quick-adjust 2pairs of protective 5-finger leather chain locks for adjusting the length of gloves (art. No. 92774) chain. 2visors (for helmet) (art. No. 51181) Weight: 13 kg 1rescue knife with leather pouch ...... 56207 (art. Nos. 61545 + 55257) 1knobbed rescue knife with leather Chain set KSV 11 pouch (art. Nos. 61544 + 55256) for spreader LSP 40 EN/LSP 60 EN * 1set of replacement tips, type consisting of 2 chains at 2 m with hook depending on type of spreader and 2 connecting chains with hook 1supporting block of hardwood and cotter pin. (art. No. 56198) Weight: 13.3 kg 1chain set with connectors, type ...... 56479 Spreader LSP 60 EN depending on type of spreader LUKAS, 1can of hydraulic oil, 1 l Replacement tips DIN 14751 (SP 45), (art. No. 56190) for LSP 40 EN and LSP 100 * TÜV approv. No. SP 43-99-TP 18. (Pair). With patented multi-function tips for Please order these parts if not Weight: 2.2 kg spreading, peeling, pulling and available already...... 56481 squeezing. Spreading force: up to 230 kN Squeezing attachment Opening: 800 mm 56478 for LSP 40 EN * Pulling distance: up to 665 mm Squeezing force: up to 110 kN Pulling force: up to 58 kN Weight: 1.2 kg Working pressure: 630 bar ...... 56607 Dim. (LxWxH): 880x344x215 mm Weight: 24.9 kg Supporting block * ...... 56487 for spreader, of hardwood. Dim. (LxWxH): 300x120x40 mm Replacement tips for LSP 60 EN * Weight: 1 kg (Pair)...... 56198 Weight: 2 kg ...... 56488 08

Spreader LSP 40 EN LUKAS, DIN 14751 (SP 30), TÜV approv. No. SP 42-99-TP 18. With patented multi-function tips for spreading, peeling, pulling and squeezing. Spreading force: up to 230 kN Opening: 720 mm Squeezing force: up to 110 kN (with squeezing attachment) Pulling distance: up to 622 mm Pulling force: up to 46 kN Working pressure: 630 bar Dim. (LxWxH): 790x320x180 mm Weight: 19.6 kg ...... 56478

* = not illustrated Some articles may not be available in specific countries. Details on request. 45 Kap. 08-46 12.04.2005 14:46 Uhr Seite 46

HYDRAULIC RESCUE EQUIPMENT LUKAS

Cutters and accessories Cutter LS 200 EN * Cutter LS 301 EN * LUKAS, LUKAS, Please note: DIN 14751-2 (S 90), TÜV approv. No. S 02-2001 TP 18, DIN 14751-2 specifies the following TÜV approv. No. S 51-99-TP 18. TÜV-tested in compliance with DIN. accessories for the cutter: The cutter that sets standards - Cylinder body of corrosionless light 2pairs of protective 5-finger highest cutting force through special metal alloy, cutter blades of drop- leather gloves (art. No. 92774) geometry of blades. Especially suitable forged steel - regrindable. The cutter 1rescue knife with leather pouch for cutting through the reinforced sides can be used under water up to a depth (art. Nos. 61545 + 55257) of modern cars. of 40 m. Dead man’s safety function. 1knobbed rescue knife with leather 2 connecting hoses at 0.5 m red/blue 2 connecting hoses at 0.5 m red/blue pouch (art. Nos. 61544 + 55256) with couplings. with couplings. 1pair of replacement blades, type Max. cutting force: 345 kN Max. cutting force: 385 kN depending of type of cutter Opening: 122 mm Round steel bars: up to 30 m (on request) Working pressure: 630 bar Opening: 150 mm Weight: 11.7 kg Working pressure: 630 bar Please order these parts if not ...... 56210 Dim. (LxWxH): 705x201x163 mm available already. Weight: 13.9 kg Replacement blades for cutter ...... 56600 LS 200 EN * 56458 (Pair). Replacement blades for cutter Weight: 4.2 kg LS 301 EN * ...... 56202 (Pair). Weight: 5.4 kg Cutter LS 330 EN ...... 56601 LUKAS, DIN 14751 (S 150), 56209 TÜV approv. No. S 56-99-TP 18. Featuring Top-Grip blades. With these blades the cutter reaches the highest cutter class ”H” acc. to prEN 13204 and cuts round steel bars up to a diameter of 30 mm. Max. cutting force: 440 kN Opening: 228 mm Cutter LS 131 EN Working pressure: 630 bar LUKAS, Dim. (LxWxH): 726x211x163 mm DIN 14751 (S 90), Weight: 14.6 kg 08 TÜV approv. No. S 01-2001-TP 18...... 56476 Extremely light and compact standard cutter with Top-Grip blades. Quick 56476 opening and closing. Thumb touch control for exact operation. Hand pump HM-1 - A DIN 2 connecting hoses at 0.5 m red/blue DIN 14751-2. with couplings. Two-stage hand pump with automatic Max. cutting force: 221 kN change-over. Fully ready for use. Opening: 140 mm With connecting hydraulic hose pair Working pressure: 630 bar 5 m long, red/blue. Dim. (LxWxH): 558x170x142 mm Angle connection 90º as well as quick- Weight: 9.7 kg action coupling sleeve and nipple...... 56458 Filling capacity: 1.3 l Working pressure: 630 bar Replacement blades for cutter Dim. (LxWxH): 626x200x203 mm LS 131 EN * Weight: 12.2 kg (Pair)...... 56209 Weight: 2.6 kg ...... 56459 Replacement blades for cutter Wooden box * LS 330 EN * DIN 14880-1 H, for cutter, hand pump (Pair). and 1 pair of replacement blades. Weight: 6.2 kg Yellow, marked...... 56477 Dim. (LxWxH): 700x400x220 mm Weight: 9 kg ...... 56227

Some articles may not be available in * = not illustrated 46 specific countries. Details on request. Kap. 08-47 12.04.2005 14:45 Uhr Seite 47

HYDRAULIC RESCUE EQUIPMENT LUKAS

56371 56366 56482

Combi tool LKS 35 EN Mini combi tool LKS 10 Rescue tool with storage battery LUKAS, LUKAS, LKE 70 DIN 14751-2 (S 90), handy spreader/cutter for use in LUKAS, type approv. No. S 28-92-TP 18. confined spaces. With non-kinking DIN 14751-2-4, Spreader, cutter and pulling tool with hydraulic hose pair of 0.5 m, red/blue, pre-standard (DIN S 90-E-l), high power and wide opening. The with quick-action coupling sleeve and type approv. No. S 44-97-TP 18. arms can be loaded over their entire nipple. Electro-hydraulic combi tool for length. With non-kinking hydraulic Cutting force: up to 116 kN spreading, cutting and pulling. hose pair of 0.5 m, red/blue, with Spreading force at the tips: 17.6 kN With the integrated storage battery quick-action coupling sleeve and Opening at the tips: 80 mm (24 Volt) the tool is immediately ready nipple. Working pressure: 630 bar for use without further preparations. Max. cutting force: 300 kN Weight: 5.8 kg It gives the user complete freedom of Spreading force in working range: ...... 56366 movement in all operations. Basic unit 42 to 80 kN consists of rescue tool LKE 70, Opening at the tips: 360 mm replacement storage battery and a Max. pulling force (with chain set): box of steel. 40 kN Cutting force: up to 270 kN Pulling distance: 400 mm Spreading force: up to 80 kN Working pressure: 630 bar Opening at the tips: 300 mm Weight: 13.7 kg Dim. (LxWxH): 850x260x173 mm ...... 56371 Weight: 23 kg ...... 56482 08 Chain set KSV 8 * for LKS 35 EN + LKE 70, Replacement storage battery * consisting of 2 drag chains at 2.2 m 7 Ah, for LKE 70. with hook, with quick-adjust chain lock. Weight: 6.3 kg Weight: 8.9 kg ...... 56483 ...... 56364 Quick-charger * Replacement arm * 230 V, for LKE 70, for LKS 35 EN. micro-processor controlled. Weight: 2.3 kg Weight: 1 kg ...... 56365 ...... 56484

Voltage transformer 12 V/230 V * for connecting the quick-charger to 12 V power supply. With connecting cable and plug for cigarette lighter. Weight: 0.5 kg ...... 56485

Voltage transformer 24 V/230 V * for connecting the quick-charger to 24 V power supply. With connecting cable and plug for cigarette lighter. Weight: 0.5 kg ...... 56486

* = not illustrated Some articles may not be available in specific countries. Details on request. 47 Kap. 08-48 12.04.2005 14:45 Uhr Seite 48

HYDRAULIC RESCUE EQUIPMENT LUKAS

Hydraulic power units 56228 56608 LUKAS

Two-stage heavy-duty power unit type PW-6R (ISV), SERIES 6 * for simultaneous connection and alternative operation of two devices (e.g. spreader and cutter). With DIN- frame. Fully ready for use. With 2 hydraulic connecting hose pairs at 5 m, red/blue and yellow/blue, with quick-action coupling sleeve and nipples. With 2-stage electric motor 230 V/ 50 Hz, 1.5 kW. Operating pressure 630 bar, max. amount of oil 7.5 l, usable amount Two-stage power unit with reel Heavy-duty power unit 5.5 l (of 5 l supplied oil 3 are usable). type PW-6R + DSH 20, SERIES 6 PT-6R-SH TRIMO With automatic change-over through for simultaneous connection and TÜV approved. Hydraulic power unit the extraordinary LUKAS ISV valve. alternative operation of two devices. for simultaneous operation of 3 rescue Dim. (LxWxH): 488x440x478 mm With DIN-frame. Fully ready for use. devices. With electric motor 230 V/ Weight: 49.5 kg With 2 hydraulic connecting hose pairs 50 Hz/2.2 kW. With DIN frame and ...... 56223 at 20 m, red/blue and yellow/blue, with three completely fitted hose reels with quick-action coupling sleeve and three hose pairs at 20 m. nipples. Operating pressure 630 bar. With 2-stage electric motor, 230 V/ Dim. (LxWxH): 772x605x484 mm 50 Hz, 1.5 kW. Weight: 108 kg Operating pressure 630 bar, ...... 56608 max. amount of oil 7.5 l, usable amount 5.5 l (of 5.5 l supplied oil, Accessories 3.5 l are usable). With automatic change-over through Storage place for the extraordinary LUKAS ISV valve. TRIMO power unit with hose reels Dim. (LxWxH): 770x440x478 mm PT-6R-SH * Weight: 85.5 kg ...... 56609 ...... 56228 Storage place * 08 Double hose reel DSH 20 * for LUKAS hydraulic power units with of aluminium. For subsequent fitting to DIN frame. power units with DIN frame. It can also Suitable for all cutters, spreaders and be placed beside the power unit. combi tools. With 2 connecting hose pairs at 20 m. Weight: 3.2 kg The hoses can be individually uncoiled ...... 170895 and coiled also under pressure. Dim. (LxWxH): 550x380x390 mm Weight: 42 kg ...... 56370

Some articles may not be available in * = not illustrated 48 specific countries. Details on request. Kap. 08-49 12.04.2005 14:44 Uhr Seite 49

HYDRAULIC RESCUE EQUIPMENT LUKAS

Rescue cylinders and accessories Extension for LZR 12/300 * 56359 (Not complying with DIN). Please note: Length: 250 mm DIN 14751-3 specifies the following Weight: 1.4 kg accessories for rescue cylinders: ...... 56399 2leaf sights - for helmet (art. No. 51181) Replacement claw * 1set of pushing heads for rescue cylinders LZR 12/... (art. No. 56358) ...... 56358 1can of hydraulic oil, 1 l (art. No. 56191) Telescopic rescue cylinder type LTR 12/575 EN Please order these parts if not LUKAS, TÜV approved acc. to DIN. available already. Heavy-duty and light-weight telescopic cylinder. The closed length ATTENTION: LUKAS rescue cylinders is equal to the length of the smallest cannot be used for pulling!! standard cylinder. Double-acting. Triple telescopic rescue cylinder Can be used under water down to a type LTR 3.5/820 EN Double-acting rescue cylinder depth of 40 m. Dead man’s safety LUKAS, DIN 14751-3, LUKAS, DIN 14751-3, function. 2 connecting hoses at 0.5 m type approv. No. RZ 14-97-TP 18. type approv. No. SRZ 3-92-TP 18. black/blue. 3-stage rescue cylinder for extreme The heights of the rescue cylinders are Stroke: stage 1: 295 mm rescue operations. With non-kinking graduated upwards. The cylinders stage 2: 280 mm hydraulic hose pair of 0.5 m, red/blue, develop constant force over the whole Pushing force: stage 1: 240 kN with quick-action coupling sleeve and stroke length. Pushing force 120 kN, stage 2: 120 kN nipple. working pressure 630 bar. With non- Length extended: 1050 mm Pushing force: stage 1: 240 kN kinking hydraulic hose pair of 0.5 m, closed: 475 mm stage 2: 120 kN black/blue, with quick-action coupling Working pressure: 630 bar stage 3: 35 kN sleeve and nipple. Dim. (LxWxD): 475x210x122 mm Length extended :1295 mm Weight: 16.7 kg closed: 475 mm ...... 56605 Total piston stroke: 820 mm 56397 Weight: 17.7 kg ...... 56359 56605

56362 56396 08 56395

Rescue cylinder type LZR 12/700 EN Closed length 900 mm, piston stroke 700 mm, extended length 1600 mm. Telescopic rescue cylinder Weight: 24 kg type LTR 12/875 EN * ...... 56397 LUKAS, TÜV approved acc. to DIN. Support angle LRS 120 As art. No. 56605 above but LUKAS. Rescue cylinder type LZR 12/500 EN Stroke: stage 1: 445 mm This angle forms a firm abutment for all Closed length 680 mm, piston stroke stage 2: 430 mm Lukas rescue cylinders when applied 500 mm, extended length 1180 mm. Pushing force: stage 1: 240 kN to e.g. deformed sills or B columns. Weight: 18 kg stage 2: 120 kN When using this angle a larger opening ...... 56396 Length extended:1500 mm is possible with one cylinder. Three closed: 625 mm different cylinder contact points. Rescue cylinder type LZR 12/300 EN Working pressure: 630 bar Suitable for all directions of work. Closed length 450 mm, piston stroke Dim. (LxWxD): 625x210x122 mm Dim. (LxWxH): 479x166x289 mm 300 mm, extended length 750 mm. Weight: 20.9 kg Weight: 9.4 kg Weight: 13 kg ...... 56606 ...... 56362 ...... 56395

* = not illustrated Some articles may not be available in specific countries. Details on request 49 Kap. 08-50 12.04.2005 14:43 Uhr Seite 50

HYDRAULIC RESCUE EQUIPMENT REPLACEMENT ULTRA-HIGH-PRESSURE HOSES LUKAS

Connecting hose 0.5 m, red * Connecting hose pair 5 m, LUKAS quick-coupling sleeve without coupling sleeve, for the red/blue * StMu 61-0 * following tools: without couplings. Weight: 0.4 kg LS 120, LS 200, LS 200 B, LS 300, Weight: 3 kg ...... 56500 LS 300 B, LS 300 C, LKS 10, LKS 35, ...... 56496 LKS 35 B, LKS 35 C, LSP 40, LUKAS quick-coupling sleeve LSP 40 B, LSP 44 C, LSP 100, Connecting hose pair 5 m, StNi 61-D * LZR 8-3/300, LZR 12/..., yellow/blue * with safety valve. LZR 12/550 PS, LTR 6/570, LTR 5/820. without couplings. Weight: 0.2 kg Weight: 0.3 kg Weight: 3 kg ...... 56501 ...... 56490 ...... 56497 Hydraulic oil for Connecting hose 0.5 m, blue * Connecting hose pair 20 m, LUKAS rescue equipment * without coupling sleeve, for the same red/blue * Required amount of oil for a hose pair: tools as art. No. 56490 above. without couplings. 5 m: 0.5 l Weight: 0.3 kg Weight: 11 kg 10 m: 1.0 l ...... 56491 ...... 56498 Hydraulic oil Connecting hose 0.5 m, red * Connecting hose pair 20 m, 1 l in can. without coupling sleeve, for the yellow/blue * ...... 56191 following tools: without couplings. LS 100, S 90, LKS 36, LSP 44, LSP 54, Weight: 11 kg Hydraulic oil SP 30, SP 40, LZR 8/300...... 56499 5 l in can. Weight: 0.3 kg ...... 56200 ...... 56492 Extension hose pair 5 m, red/blue * Hydraulic oil Connecting hose 0.5 m, blue * complete with couplings, without oil. 10 l in can. without coupling nippel, for the same Weight: 3.5 kg ...... 56201 tools as art. No. 56492 above...... 56189 Weight: 0.3 kg ...... 56493 Extension hose pair 5 m, yellow/blue * Connecting hose 0.5 m, red * complete with couplings, without oil. without coupling sleeve, for the Weight: 3.5 kg following tools: ...... 56502 LSP 44 B and LSP 80. Weight: 0.3 kg Extension hose pair 10 m, 08 ...... 56494 red/blue * complete with couplings, without oil. Connecting hose 0.5 m, blue * Weight: 6 kg without coupling nipple, for the same ...... 56503 tools as art. No. 56494 above. Weight: 0.3 kg Extension hose pair 10 m, ...... 56495 yellow/blue * complete with couplings, without oil. Weight: 6 kg ...... 56504

Some articles may not be available in * = not illustrated 50 specific countries. Details on request. Kap. 08-51 12.04.2005 14:57 Uhr Seite 51

CHOCKS, BLOCKS AND WEDGES, RESCUE PLATFORMS, AIRBAG SAFETY SYSTEM

55861 56230

19249 19258

19252

19253

19250 19254 19251

Chocks, blocks and wedges made Rescue platform for fire brigades Airbag safety system of 100% recycled plastic Light-weight, rugged aluminium for improved safety construction. Spindle feet for leveling OCTOPUS® Compared to conventional materials of differences of up to 0.36 m. Driver-airbag safety system. with decisive advantages: Fold-down and removable railing. OCTOPUS® - the reliable protection - carrying capacity 100 kg/cm2 Belts for fixing the platform to a truck. against delayed tripping of the airbag. - durable The platform consists of non-skid If airbags are not activated in an - light-weight grating. accident, malfunctions might occur - non-skid Dim. of platform (LxW): 1800x880 mm up to 20 minutes after disconnecting - oil and chemical resistant Height of platform: max. 1.64 m the battery, e.g. through heat or radio. - splinter-free Permissible load: 400 kg The safety system protects the rescuer - economical Packing dim. (LxWxH): as well as the victim against injuries. 1800x940x450 mm Quick and easy handling ensures Step chock ”mark I” Weight of collapsible frame: 31 kg safety within a very short time (approx. Dim. (LxWxH): 738x145x270 mm Weight of platform: 28 kg 10 s to install). The system consists of Weight: 7 kg ...... 55861 a yellow polyester strap (RAL 1018), ...... 19249 width 25 mm, compr. force 2500 dN. Supplied in combi pack consisting of: 55865 Step chock ”mark II” Size I f. steering wheels Ø 350-390 mm, Dim. (LxWxH): 600x100x315 mm size II f. steering wheels Ø 400-450 mm. Weight: 6 kg Packed in red plastic case...... 19258 Dim. (LxWxH): 400x310x100 mm 08 Weight: 1.8 kg Wedge 75 mm PE ...... 56230 Dim. (LxWxH): 75x75x230 mm Weight: 0.5 kg Bracket for OCTOPUS® -system * ...... 19250 Bracket of steel for the case, white. Dim. (LxWxD): 400x150x100 mm Wedge 150 mm PE Weight: 1.3 kg Dim. (LxWxH): 150x75x230 mm ...... 56218 Weight: 1 kg ...... 19251 Airbag safety system OCTOPUS® for front-seat Block 25 mm PE Rescue platform, small version passenger * Dim. (LxWxH): 230x230x25 mm with checkered metal plate, Protects rescuer and victim against Weight: 1 kg size 1860x750 mm. uncontrolled tripping of the airbag ...... 19254 Height of platform: 973 mm during rescue work. The system (not adjustable in height) consists of 5 straps and a square Block 50 mm PE Permissible load: 300 kg canvas of trevira to which the straps Dim. (LxWxH): 230x230x50 mm Packing dim. (LxWxH): are fixed. It is installed within 60 s. Weight: 2 kg 2080x910x130 mm The set comes in a water-repellant ...... 19253 Weight: 30 kg nylon bag...... 55865 Weight: 3 kg Block 75 mm PE ...... 56205 Dim. (LxWxH): 230x230x75 mm Weight: 1 kg Further rescue platforms on WEBER airbag safety system, please ...... 19252 request! see page 36!

* = not illustrated Some articles may not be available in specific countries. Details on request. 51 Kap. 08-52 12.04.2005 14:56 Uhr Seite 52

CHAIN SAWS AND ACCESSORIES STIHL

61678 61680 61687

Petrol engine powered saws Petrol engine powered saw Replacement Oilomatic saw chains STIHL, MS 440 * with anti-vibration system, quickstop bar length 45 cm Rapid Micro * chain brake, side chain tensioner, otherwise as art. No. 61680. Pitch .325” for STIHL MS 260, ElastoStart and compensator. All saws Weight: 7.3 kg bar length 37 cm. feature Rollomatic bar and Oilomatic (with bar and chain) Weight: 0.27 kg saw chain...... 61674 ...... 61681

Petrol engine powered saw MS 260 Petrol engine powered saw Rapid Micro * bar length 37 cm MS 460 CAT * Pitch .325” for STIHL MS 260, with Rapid Micro chain, pitch .325”, with catalytic converter, bar length 40 cm. 48.7 cc, 2.6 kW/3.5 HP. bar length 40 cm Weight: 0.28 kg Weight: 5.8 kg with Rapid Super chain, pitch 3/8”, ...... 61689 (with bar and chain) 7.5 cc, 4.4 kW/6.0 HP...... 61678 Weight: 8 kg Rapid Micro * (with bar and chain) Pitch 3/8” for STIHL MS 360, Petrol engine powered saw MS 260 * ...... 61676 bar length 37 cm. bar length 40 cm Weight: 0.31 kg otherwise as art. No. 61678. Petrol engine powered saw ...... 61682 Weight: 5.8 kg MS 460 CAT * (with bar and chain) with catalytic converter, Rapid Super * 08 ...... 61672 bar length 45 cm Pitch 3/8” for STIHL MS 360, 440, otherwise as art. No. 61676. 460 C, Petrol engine powered saw MS 360 * Weight: 8.2 kg bar length 40 cm. bar length 37 cm (with bar and chain) Weight: 0.33 kg with Rapid Micro chain, pitch 3/8”, ...... 61675 ...... 61683 61.5 cc, 3.4 kW/4.6 HP. Weight: 6.9 kg Electric saw MSE 160 Rapid Super * (with bar and chain) bar length 30 cm Pitch 3/8” for STIHL MS 440, 460 C, ...... 61679 with Picco Micro chain, pitch 3/8” P, bar length 45 cm. and Rollomatic bar. Weight: 0.37 kg Petrol engine powered saw MS 360 * Rated voltage 230 V, ...... 61690 bar length 40 cm power input 1.6 kW. otherwise as art. No. 61679. Weight: 4 kg Picco Micro * Weight: 6.9 kg (with bar and chain) Pitch 3/8” for STIHL MSE 160, (with bar and chain) ...... 61687 bar length 30 cm...... 61673 Weight: 0.15 kg Electric saw MSE 160 * ...... 61691 Petrol engine powered saw MS 440 bar length 35 cm bar length 40 cm otherwise as art. No. 61687. Picco Micro * with Rapid Super chain, pitch 3/8”, Weight: 4.1 kg Pitch 3/8” for STIHL MSE 160, 70.7 cc, 4.0 kW/5.4 HP. (with bar and chain) bar length 35 cm. Weight: 7.1 kg ...... 61688 Weight: 0.17 kg (with bar and chain) ...... 61692 ...... 61680 Further Stihl saws on request. Further versions on request.

Some articles may not be available in * = not illustrated 52 specific countries. Details on request. Kap. 08-53 12.04.2005 14:55 Uhr Seite 53

STIHL CUT-OFF MACHINES HUSQVARNA CHAIN SAWS

STIHL cut-off machines 61500 61504 with anti-vibration system, electronic ignition, ElastoStart, decompression valve and compensator.

Cut-off machine TS 400 * The successor to the legendary TS 350. For cutting wheels of 300 mm diameter (supplied with composite cutting wheel). 64.1 cc, 3.2 kW/4.4 HP, max. cutting depth 100 mm. Weight: 8.9 kg ...... 61699

Composite cutting wheel ”Standard” * Husqvarna chain saws Petrol engine powered chain saw for steel, 300x4 mm. 362 XP ...... 61701 Petrol engine powered chain saw Handy saw with aggressive engine 372 XP features and low weight. Air Injection, Composite cutting wheel Saw for professional logging of the LowVib anti-vibration system. ”Standard” * larger middle class for extreme Optimum performance for professional for stone and concrete, 300x4 mm. operations. Air injection, LowVib anti- applications...... 61702 vibration system, side chain tensioner, Bar length 38 cm. low weight. With quick-start system Pitch 3/8”, 62.4 cc, 3.4 kW/4.6 HP. Smart Start. Weight: 6.4 kg 61705 Bar length 45 cm. (with bar and chain) Pitch 3/8”, 70.7 cc, 3.9 kW/5.4 HP...... 61504 Weight: 7.8 kg (with bar and chain) Petrol engine powered chain saw ...... 61500 362 XP bar length 45 cm * Petrol engine powered chain saw otherwise as art. No. 61504. 372 XP Weight: 6.6 kg bar length 50 cm * (with bar and chain) otherwise as art. No. 61500...... 61505 Weight: 7.8 kg (with bar and chain) Replacement chain * 08 ...... 61501 Pitch 3/8” for Husqvarna 372 XP and 362 XP, Replacement chain * bar length 45 cm. Cut-off machine TS 760 Pitch 3/8” for Husqvarna 372 XP, Weight: 0.38 kg for cutting wheels of 400 mm bar length 50 cm...... 61502 diameter (supplied with a composite Weight: 0.4 kg cutting wheel)...... 61503 Replacement chain * 111 cc, 4.8 kW/6.5 HP, Pitch 3/8” for Husqvarna 362 XP, max. cutting depth 145 mm. bar length 38 cm. Weight: 15.3 kg Weight: 0.3 kg ...... 61705 ...... 61506

Composite cutting wheel ”Standard” * for steel, 400x4.5 mm...... 61706

Composite cutting wheel ”Standard” * for stone and concrete, 400x4.5 mm...... 61707

* = not illustrated Some articles may not be available in specific countries. Details on request. 53 Kap. 08-54 12.04.2005 14:55 Uhr Seite 54

HUSQVARNA CUT-OFF MACHINE VARIOUS SAWING EQUIPMENT / ACCESSORIES

61508 61599

61684 9028 61941 61686 61943

9027

Cut-off machine 371 K Splitting wedge of steel Forest safety jacket Husqvarna Forged. Green, sleeves with adjustable sleeve with quick-start function Smart Start, Length: 240 mm bands, turn-down collar, shoulder part 3-stage air filter system with Air Injec- Weight: 2 kg red, 2 breast pockets, 2 side pockets, tion, LowVib anti-vibration system...... 61941 1 inside pocket. Without reinforcement For cutting wheels with diameters of against cuts. Does not comply with 300 mm, 305 mm, 355 mm and 405 mm, Splitting wedge of aluminium EN 381. (supplied w. 1 composite cutting wheel Forged (felling and splitting wedge). Available in sizes 46-64. of 305 mm), arbor 20 mm, incl. adaptor Length: 260 mm ...... 9028 arbor 22.2 mm for special cutting Weight: 0.82 kg wheel for rescue work...... 61943 Dungarees 70.7 cc, 3.5 kW/4.8 HP. of mixed fabric 50% nylon/ Depth of cut: 100 mm - 125 mm Forest safety helmet Peltor 50% cotton, complying with EN 381, (depending on diameter of wheel) Complying with EN 352/3, FPA- water and dirt repellant, green. Weight: 9.4 kg ...... 61508 approved, KWF-tested. Orange. With With sewn-in KWF-tested lining as cut face screen V4B (removable sunshade) protection. FPA-tested and approved. Composite cutting wheel * as well as with ear protection H9P3e. Adjustable elastic braces, 2 side for steel, 305 mm...... 61599 pockets, 1 chest pocket with zipper, ...... 61509 1 seat pocket, 1 pocket for yardstick. Available in sizes 46-64. Composite cutting wheel * ...... 9027 08 for concrete, 305 mm. 61599 ...... 61510 Dungarees for forestry workers * of mixed fabric, green/orange, with Diamond cutting wheel * all around lining as cut protection. for hard steel, hard concrete, concrete Style C, EN 381-5. pipes, reinforced concrete, 305 mm. Available in sizes 44-66...... 61511 ...... 9421 9496 Cutting wheel for rescue work * Leg protection for forestry work * Reinforced hard metal, 300 mm. Green, with KWF-tested lining as cut ...... 61512 protection, zipper in the crotch seam, orange coloured warning wedge, Various sawing equipment/ adjustable in length. accessories ...... 61593 Leg protection Wedge of aluminium Green, tested in compliance with Double can * Forged, with wooden handle and ring. EN 381, style A, class 1. of polyethylene, red, with discharge Length: 190 mm Mixed fabric: pipe, approv. No. 3H1W/Y1.0Z1.0/ Weight: 0.98 kg 60% cotton, 40% polyester 150/02/D/BAM6080-huen...... 61684 Dirt repellant, adjustable in length by Consisting of 2 separate containers means of snap hooks. with never-lost screw lids. White. Splitting wedge of plastic One size (fits size 48 - 58). Volume: 5 l and 3 l (Felling and splitting wedge)...... 9496 Dim. (LxWxH): 315x150x330 mm Length: 180 mm Weight: 1 kg Weight: 0.22 kg ...... 61575 ...... 61686

Some articles may not be available in * = not illustrated 54 specific countries. Details on request. Kap. 08-55 12.04.2005 14:54 Uhr Seite 55

VARIOUS CUT-OFF MACHINES AND ACCESSORIES

61604 61490 63529

FLEX electric saber saw, 230 V TwinSaw cut-off machines Cut-off machine type SKD 2902 VV Heavy-duty twinsaw cut-off machine BOSCH, 1200 W, switch-activated orbital with special cutting wheels of hard electric cut-off machine (angle-grinder) stroke, rotating soft-grip handle with metal. Safe and smooth operation 230 V/2000 W, for cutting wheels axial turns 90° to the right and 2 x 90° through contrarotating cutting wheels of 230 mm Ø, with 10 m of cable to the left. Consistent stroke control, with long edge life and new geometry H 07 RN-F 3G 1.5 and safety plug. soft start w. accelerator trigger switch. of wheels. Single-stage, load- Approx. 6500 rpm. Blade positioning 0° and 180°, even for controlled electronic system for Basic equipment: over-head sawing. Tilting saw support optimum safety and cutting protective cover, tightening disk, and depth adjustable to 4 levels performance. tightening nut, additional handle without tools. and socket screw wrench. With 5 saw blades each for: Basic equipment with 2 pairs of Weight: 5.7 kg wood with nails 150 mm, hard metals special cutting wheels for cutting ...... 63529 0.3 mm/200 mm, hard metals metal, wood and synthetic material. 1.5 mm/200 mm, trapezoidal plate With patented pump system in the Cutting wheel * 200 mm. Incl. synthetic case. handle (incl. cooling agent and lubri- for stone, 230 mm. Weight: 3.8 kg cant), electronic overload protection, ...... 63519 ...... 61604 connecting cable of 10 m with waterproof plug, protective cover, Cutting wheel * special tools, safety goggles and for metal, 230 mm. 61603 transport case...... 63520 08 TwinSaw cut-off machine Cutting wheel * CDC 2224 (rescue set) for aluminium, for cutting e.g. 2200 W, 230 V/11 A, 1900 rpm. aluminium, copper, zinc, lead, Cutting wheels Ø 235 mm, 230 mm, straight form. max. depth of cut 65 mm...... 61570 Wheels are screwed on and off. Weight: 13 kg Safety goggles * ...... 61490 DIN 58210, of perbunan, with exchangeable non-clouding front TwinSaw cut-off machine shield. CDC 2530 (rescue set) * ...... 63925 2700 W, 230 V/14 A, 1900 rpm. Cutting wheels Ø 310 mm, Safety goggles * Orbital action saw WSR 1200 PE max. depth of cut 100 mm. DIN 4644, for grinders. Frame of HILTI, Wheels are changed by means of aluminium with hose rubber trimming 1500 W, stroke 32 mm. bayonet quick catch system. and 14 covered openings. With Cutting performance: Weight: 14 kg colourless, shatterproof, easily metal up to 35 mm diameter, ...... 61491 exchangeable glasses. synthetics up to 300 mm diameter, Weight: 50 g anti-vib. system, 4 cutting speeds. Replacement cutting wheels, further ...... 58743 Incl. saw blade MD 15 (sheet metals, special cutting wheels and metals), operating instruction and accessories on request. carrying case. Weight: 5.5 kg Please turn to us for infos about ...... 61603 adaptation of Adamant saws.

* = not illustrated Some articles may not be available in specific countries. Details on request. 55 Kap. 08-56 12.04.2005 14:53 Uhr Seite 56

CUT-OFF EQUIPMENT

Bar of titanium for 63534 61628 MULTI-CUT II, 40 cm * ...... 61669

Bar of titanium for MULTI-CUT II, 50 cm * ...... 61670

Concrete chain saw for the fire brigades, type 633 GC with diamond chain and water connec- tion for lubrication and cooling. Cutting length 30 cm, 6.5 HP, with accessories. Max. rpm: 12,000 Weight: 12.5 kg Acetylene/oxygen cutter MULTI-CUT II rescue saw ...... 61636 and accessories Universal petrol engine powered chain saw for the most various of materials, 61636 Acetylene/oxygen cutter such as aluminium plate, copper plate, DIN 14800-7. plexiglas, wood with nails, insulating With back pack with oxygen cylinder materials, masonry, roof tiles etc. The of 5 l, acetylene cylinder of 5 l, 5 m of saw was specially designed for use by acetylene hose and 5 m of oxygen the fire services. This multi-functional hose, handle with cutting attachment, saw cuts openings and accesses, 4 cutting nozzles, tool box with especially useful when positive 2 safety goggles, nozzle cleaner, pressure ventilation is required. spanner size 32, special nozzle key, igniter, backfire protection. Only original MULTI-CUT Dim. (LxWxD): 675x425x375 mm accessories should be used. Weight: 38 kg ...... 63534 MULTI-CUT II rescue saw cutting length 40 cm Replacement oxygen cylinder 5 l * with Husqvarna engine 372 XP 5.4 HP. Filled, for acetylene/oxygen cutter. Full-wrap handle, exhaust protection Replacement diamond chain * Weight: 9.5 kg shield, one-piece guide bar, special for concrete chain saw art. No. 61636...... 63537 chain with hard metal tips, depth-of- Cutting length 30 cm. 08 cut adjustment of PA 6...... 61637 Replacement acetylene cylinder 5 l * Max. rpm: 13,500 Filled, for acetylene/oxygen cutter. Weight: 9.6 kg Replacement bar with water Weight: 11.5 kg ...... 61628 drainage * ...... 63538 for concrete chain saw art. No. 61636. MULTI-CUT II rescue saw Cutting length 30 cm. Set of cutting attachments * cutting length 50 cm * ...... 61638 for material of 100 - 200 mm with Husqvarna engine 372 XP 5.4 HP. thickness. Full-wrap handle, exhaust protection Conversion set MULTI-CUT, 50 cm * Consisting of heating nozzle size 2 shield, one-piece guide bar, special for Husqvarna saws type XP 635. and 2 cutting nozzles 100 - 200 mm. chain with hard metal tips, depth-of- Consisting of: full-wrap handle, guide ...... 63535 cut adjustment of PA 6. bar, exhaust protection shield, depth- Max. rpm: 13,500 of-cut adjustment, chain protection, Guiding carriage * Weight: 10 kg tool holder, chain ”Terminator”, chain for the cutter handle...... 61643 wheel .404. Weight: 0.3 kg ...... 61709 ...... 63536 Special saw chain for MULTI-CUT II Conversion set MULTI-CUT, 40 cm * cutting length 40 cm * for Husqvarna saws type XP 635...... 61667 Consisting of: full-wrap handle, guide bar, exhaust protection shield, depth- Special saw chain for of-cut adjustment, chain protection, MULTI-CUT II tool holder, chain ”Terminator”, chain cutting length 50 cm * wheel .404...... 61668 ...... 61708

Some articles may not be available in * = not illustrated 56 specific countries. Details on request. Kap. 08-57 12.04.2005 14:52 Uhr Seite 55

PLASMA CUTTERS

Accessories for plasma cutter 56329 56550 Protecting shield * ...... 56565

Torch cap * ...... 56566

Nozzle * ...... 56567

Electrode * ...... 56568

Whirl ring * ...... 56569 Plasma cutter Plasma cutter Hypertherm Powermax 600 FW Hypertherm Powermax 1000 FW Type of protection IP 44 with Type of protection IP 44 with certification. Mobile heavy-duty certification. Mobile heavy-duty plasma cutter. plasma cutter. Max. capacity: Max. capacity: steel up to 16 mm at cutting speeds steel up to 19 mm at cuttings speeds over 250 mm/min over 559 mm/min Severance capacity: Severance capacity: rough cuts of steel up to 22 mm thick rough cuts of steel up to 32 mm thick Incl.: source of current, Incl.: source of current, torch PAC 123T, torch PAC 123T, set of parts subject to wear, set of parts subject to wear, work cable with clamp (15 m), work cable with clamp (15 m), primary power cable 15 m, primary power cable 15 m, system voltage 400 V, 16 A, 3-phase, system voltage 400 V, 16 A, 3-phase, 50/60 Hz. 50/60 Hz. Feeder cable H 07 RN-F G 2.5. Feeder cable H 07 RN-F G 2.5. CE certification. CE certification. Flow: 170 l air/min Flow: 189 l air/min Working pressure: 5 bar Working pressure: 5 bar Incl. accessories: Incl. accessories: 08 air connection for 300 bar, air connection for 300 bar, pressure reducer for compr.-air pressure reducer for compr.-air cylinder 200/300 bar, cylinder 200/300 bar, safety goggles (glas) for current safety goggles (glas) for current intensity up to 100 A ISO 4850-11, intensity up to 100 A ISO 4850-11, protective gloves. protective gloves. Weight: 26 kg Weight: 39 kg ...... 56329 ...... 56550

Set of wheels for plasma cutter Set of wheels for plasma cutter Hypertherm Powermax 600 FW * Hypertherm Powermax 1000 FW * ...... 56552 ...... 56551

* = not illustrated Some articles may not be available in specific countries. Details on request. 57 Kap. 08-58 12.04.2005 14:51 Uhr Seite 56

BOXES FOR FIRE SERVICE EQUIPMENT AND TOOLS

Boxes for fire service equipment Box for fire service equipment Box for fire service equipment in compliance with DIN 14880 DIN 14880-5-LM, size 5 * DIN 14880-4-LM-OG, size 4 * with lid and 3 handles. as art. No. 19220. Strong, stackable transport boxes of Dim. (LxWxH): 600x265x220 mm Dim. (LxWxH): 400x300x150 mm light metal alloy with high corrosion- Weight: 4.5 kg, empty Weight: 2 kg, empty resisting quality...... 59443 ...... 59452

Boxes with lid Box for fire service equipment Box for fire service equipment Smooth side walls, spot-welded high DIN 14880-6-LM, size 6 DIN 14880-5-LM-OG, size 5 * seam. Rims of rugged aluminium with lid and 4 handles. as art. No. 19220. molding. The hinged lid with rubber Dim. (LxWxH): 800x400x330 mm Dim. (LxWxH): 600x265x220 mm sealing ensures tightness against dust Weight: 7 kg, empty Weight: 2.5 kg, empty and spray water...... 59444 ...... 59453

Boxes without lid Box for fire service equipment 59444 Stackable transport boxes of DIN 14880-6-LM-OG, size 6 * perforated aluminium. Light metal as art. No. 19220. alloy, 1 mm thick. Perforated sides Dim. (LxWxH): 800x400x330 mm (Ø 10 mm). 2 spring-load handles Weight: 4.5 kg, empty (on the short sides)...... 59454 59441

19220

59442

64190

Box for fire service equipment DIN 14880-1-LM, size 1 * with lid and 4 handles. Dim. (LxWxH): 600x400x220 mm Weight: 5 kg, empty ...... 59440

08 Box for fire service equipment Box for fire service equipment Boxes for fire service equipment DIN 14880-2-LM, size 2 DIN 14880-1-LM-OG, size 1 incl. inside fittings with tool sets on with lid and 4 handles. with perforated sides, without lid. request! Dim. (LxWxH): 400x300x220 mm Dim. (LxWxH): 600x400x220 mm Weight: 3.5 kg, empty Weight: 3.5 kg, empty ...... 59441 ...... 19220

Box for fire service equipment Box for fire service equipment DIN 14880-3-LM, size 3 DIN 14880-2-LM-OG, size 2 * with lid and 3 handles. as art. No. 19220. Dim. (LxWxH): 600x400x150 mm Dim. (LxWxH): 400x300x220 mm Weight: 5 kg, empty Weight: 2.5 kg, empty ...... 64190 ...... 59450

Box for fire service equipment Box for fire service equipment DIN 14880-4-LM, size 4 DIN 14880-3-LM-OG, size 3 * with lid and 3 handles. as art. No. 19220. Dim. (LxWxH): 400x300x150 mm Dim. (LxWxH): 600x400x150 mm Weight: 3.5 kg, empty Weight: 3 kg, empty ...... 59442 ...... 59451

Some articles may not be available in * = not illustrated 58 specific countries. Details on request. Kap. 08-59 12.04.2005 14:50 Uhr Seite 57

TOOL BOXES AND TOOL KITS

ZIEH-FIX® forcible entry system 64320 ”112” * 83513 An assortment of the most important tools for forcible entry into houses and flats. Contents: Tools for opening shut doors via the door latch or the metal fittings, latches, pulling and crushing tools as well as a metal cutting machine, set of hand picks, ZIEH-FIX® electro-pick and pivot window opener. Dim. of case (LxWxH): 565x405x260 mm, with carrying strap 83511 Weight: 18 kg ...... 64317

ZIEH-FIX® Premium Replacement traction bolts * Replacement pushing broom with A combination of pulling device and for ZIEH-FIX® and ZIEH-FIX® Premium thread M 10 * crushing pipe. The advantages of (in packages of 10 pieces), Ø 30 cm. ZIEH-FIX® Premium is that the pulling ...... 83514 force for breaking the lock does not Standard have to be applied by the tractor bolt Ø 3.9 mm, 20000 N...... 64324 Replacement sweeping star * only, as the main forces are applied Double, with hole Ø 28 mm. directly on the lock cylinder through Extra Ø 30 cm...... 83515 the tilt and bending movements. By Ø 4.2 mm, 32000 N...... 64321 means of the precise fitting slot in the Tool box for the fire service shape of a profile cylinder contour a Super DIN 14881, size 1, wooden box form-locking connection of the Ø 4.8 mm, 38000 N...... 64322 DIN 14880, grey RAL 7003, marked cylinder and ZIEH-FIX® Premium is ”Handwerkszeug”. Contents com- guaranteed and the traction bolt is Special plying with DIN 14881. With corres- relieved for the most part. Available for Ø 5.5 mm, 42000 N...... 64323 ponding compartments for the tools. profile cylinders only. All tools are Dim. (LxWxH): 700x400x220 mm contained in the case. Chimney sweep tools Weight: 34.5 kg Dim. (LxWxH): 450x340x110 mm DIN 14800-4...... 55519 Weight: 4 kg Consisting of: ...... 64320 looped ball 1.5 kg, beating chain 4 mm/50 cm long, screw fastener 82223 ZIEH-FIX® * WUK of iron, impact bolt with loop, 08 Simple handling. With this device impact ring, snap hook with safety safety lock cylinders can be opened spring 8 cm, double sweeping star quickly without damaging the metal Ø 30 cm, fireman’s chain 30 m/Ø 4 mm, fittings or doors. pushing broom with thread Ø 30 cm/ Dim. (LxWxH): 400x350x100 mm 2 layers, 2 B-bars at 2.5 m without Weight: 3.8 kg hand ball, B-bar of 2.5 m with hand ...... 64318 ball, brass thread connector, small 55519 mirrow with telescopic handle, large mirrow with telescopic handle, Available only to public authorities 4 square spanners with small loop after written order! 5, 6, 8 and 10 mm, key with hole, two-bit key, shoulder iron. Weight: 18 kg ...... 83511 Electric tools for the fire service in wooden box Case DIN 14885, size 4, with tools insulated for storing above chimney sweep tools up to 1000 V. Box DIN 14880, with art. No. 83511, except for bars. compartments, grey RAL 7003, Dim. (LxWxH): 550x310x130 mm marked ”Nur für Elektrofachpersonal Weight: 2 kg und unterwiesene Personen”...... 83513 Contents complying with DIN 14885. Dim. (LxWxH): 350x400x110 mm Weight: 6.3 kg ...... 82223

* = not illustrated Some articles may not be available in specific countries. Details on request. 59 Kap. 08-60 12.04.2005 15:04 Uhr Seite 58

VARIOUS TOOLS

Assembly-tool box, 3-part * Crowbar 1200 * 63932 Steel, empty. DIN 14853, Ø 30 mm, round, one end Dim. (LxWxH): 430x200x150 mm pointed, the other end with claw. Weight: 3.2 kg Cutting edge and point hardened...... 64312 Colour: black Length: 1200 mm Assembly-tool box, 5-part * Weight: 6.4 kg Steel, empty...... 61713 Dim. (LxWxH): 430x200x200 mm Weight: 4.6 kg Crowbar 1500 * ...... 64313 DIN 14853. As art. No. 61713 above, but length 1500 mm. Assembly-tool box, 5-part * Weight: 8.1 kg Steel, empty...... 61740 Dim. (LxWxH): 600x200x200 mm Weight: 5.7 kg ...... 64314 Lifting jack ”Quick-Lift” Steel, galvanized and maintenance- Set of tools * free. Quick setting up by means of a consisting of: patented mechanism, infinitely -chipping chisel A 300 DIN 6553 56313 adjustable. With pushing as well as -sledge hammer 2 S DIN 6475 pulling capacity. Complete with lever. -pliers 180 with grip jackets DIN 5244 Load up to 55 kN. -hammer 500 S DIN 604 56311 Tested and approved by BAM. - screw driver A 0.8x5.5x125 DIN 5265 ”Quick-Lift” as trench support -screw driver A 1.6x8x200 DIN 5265 Extensible from 0.60 - 1.0 m. Weight: 4 kg Weight: 9 kg ...... 64315 ...... 63932

Sledge hammer 6000 g ”Quick-Lift” as ceiling support * DIN 1042, with varnished handle. Pike pole with handle Extensible from 1.0 - 1.7 m. Length: 700 mm DIN 14851, 2.5 m. Handle of Oregon- Weight: 13 kg Weight: 6.4 kg pine, impregnated, forged tip. End of ...... 63933 ...... 61133 handle with screw thread. Galvanized metal parts. ”Quick-Lift” as ceiling support * Weight: 5 kg Extensible from 1.7 - 3.0 m. 08 ...... 56311 Weight: 18 kg ...... 63934 Extension handle 2.5 m of Oregon-pine, varnished, with 63405 galvanized screw sleeve. 61133 For pike pole DIN 14851. Weight: 2.8 kg 61739 ...... 56313

Pike pole * 2-part DIN 14851. Handle of Oregon- pine, varnished, with galvanized screw coupling. Total length 5 m, weight of hook 1.5 kg. Weight: 8 kg Crowbar 700 ...... 56323 DIN 14853, Ø 30 mm, round, one end pointed, the other end with claw. Crosscut saw * Cutting edge and point hardened. DIN 11609, length of blade 1200 mm. Colour: black Weight: 1.7 kg ...... 61620 Building support (class E) Length: 700 mm DIN EN 1065. Permissible load 30 kN Weight: 3.7 kg Hack saw * over the whole extended length...... 61739 Steel frame, 250x890 mm. Saw blade Corrosionless, infinitely adjustable with tensioning device. from 1800 up to 3000 mm. Length of blade: 700 mm Weight: 16 kg Weight: 1.1 kg ...... 61623 ...... 63405

Some articles may not be available in * = not illustrated 60 specific countries. Details on request. Kap. 08-61 12.04.2005 15:03 Uhr Seite 59

VARIOUS TOOLS RESCUE TOOLS

63406 61550 61544

61525

55256 55257 61526 61529

61545

Ditch brace 600 - 900 mm Bolt clipper with hooks Rescue knife DIN 4124. Approved by the relevant with exchangeable blades of chrome ”HUBERTUS Rescue-Tool” trade association. With claw plate and vanadium steel, steel pipe arms with with clip, belt case and strap. nail hole. Permissible load 25 kN over plastic grips. Cutting capacity: Compact and lightweight design. the whole extended length. 13 mm at 735 N/mm2 and One-hand handling (also with gloves), Infinitely adjustable from 600 up to 10 mm at 1225 N/mm2 not sharpened blade tip. 900 mm. Corrosionless. Total length: 955 mm Closed length: 120 mm Weight: 4 kg Weight: 6.5 kg Opened length: 215 mm ...... 63406 ...... 61525 Thickness of grip: 18 mm Weight: 0.1 kg Ditch brace 800 - 1100 mm * Steel cutter ...... 61550 DIN 4124. Infinitely adjustable from with turnable blades of stainless steel, 800 up to 1100 mm. triangular shape. Cuts structural steel Belt knife Weight: 4.5 kg (temper I-IV) up to Ø 16 mm, with stainless steel blade of 15 cm...... 63407 prestressed concrete and spring steel Total length: 30 cm up to Ø 10 mm. Weight: 0.2 kg Ditch brace 1100 - 1400 mm * Total length: 1060 mm ...... 61544 DIN 4124. Permissible load 22 kN over Weight: 8 kg the whole extended length. Infinitely ...... 61526 Case for belt knife art. No. 61544 adjustable from 1100 up to 1400 mm. of leather. Weight: 5.5 kg Bolt clipper with hooks ...... 55256 ...... 63408 as art. No. 61525, but with the 08 following cutting capacity: Cutting knife Rescue set ”FORCE” * 9 mm at 735 N/mm2 and with exchangeable blade. Specially designed for penetrating 8 mm at 1225 N/mm2 Weight: 0.1 kg obstacles, consisting of axe and claw Total length: 650 mm ...... 61545 part as well as transport/rescue belt. Weight: 2.7 kg Complete with vehicle bracket...... 61529 Case for cutting knife art. No. 61545 Length of axe and claw part 565 mm, of leather. extended with claw 840 mm. Breaking tool ”Hooligan Tool” ...... 55257 Total weight: 5.1 kg with lever claw * ...... 56244 Multi-function breaking tool for forcing Replacement blade for cutting knife doors, windows etc. open. Can be art. No. 61545 * Sheet breaker * used as a crowbar and nail rod, for ...... 61551 One end with hardened steel cutting spreading and tearing down. Of edge, the other end with hardened hardened steel with chrome-plated Belt cutter * steel tip. Handle with yellow hand surface and grooved handles (25 mm of light metal, for safe and quick protection. diameter). cutting of safety belts, red, Length: 650 mm Length: 762 mm exchangeable blade. Weight: 1.5 kg Weight: 5.2 kg ...... 61749 Dim. (LxWxH): 225x45x6 mm ...... 61732 Weight: 0.15 kg Breaking tool ”Hooligan Tool” ...... 61171 with metal cutting claw * as art. No. 61749, but with metal cutting claw. Weight: 4.5 kg ...... 61750

* = not illustrated Some articles may not be available in specific countries. Details on request. 61 Kap. 08-62 12.04.2005 15:03 Uhr Seite 60

VARIOUS TOOLS

61871 55316

61856 61212 61872 61858 61932 61922 61921 61933 61884 61882

Sand shovel Coal and gravel shovel Hatchet 600 DIN 20120, shape ”Holstein”, with with 9 prongs of forged steel, 250 mm DIN 5131. beechwood handle DIN 20151, wide, 330 mm long. Varnished beechwood handle. 1350 mm long, oil-hardened shovel. Handle DIN 20151, 1350 mm long. Dim. (LxH): 360x150 mm Size of blade: 270x250 mm Weight: 2.6 kg Weight: 0.8 kg Weight: 1.8 kg ...... 61921 ...... 55316 ...... 61884 Dung-fork Felling axe B2 Cutting shovel with 4 prongs of forged steel. DIN 7294. Size 5, DIN 20121, shape ”Frankfurt”, Varnished handle DIN 20151, Length of handle 900 mm, DIN 7295. with beechwood handle DIN 20151, 1350 mm long. Weight: 3 kg 1350 mm long, oil-hardened shovel. Weight: 1.6 kg ...... 61212 Size of blade: 260x300 mm ...... 61922 Weight: 1.8 kg Pickaxe 1.5 kg ...... 61882 Dung-hook DIN 20109, 430 mm wide. with 4 prongs. Varnished handle 950 mm long. Spade Varnished handle DIN 20152, Weight: 2.1 kg DIN 20127, mit YD ashwood handle 1350 mm long...... 61871 DIN 20152, blade of cast steel, Weight: 1.5 kg 285 mm long, 180 mm wide, ...... 61932 Pickaxe 3.5 kg with 2 springs 200 mm. DIN 20109, 590 mm wide. 08 Length of handle: 850 mm Oiled handle 950 mm long. 61880 Weight: 2.4 kg Weight: 4.4 kg ...... 61858 ...... 61872

Folding spade ”Miniklapp” Flat axe All-metal, green. Axe 125 mm wide, 185 mm high. Folded length: 240 mm Handle 1310 mm long. Size of blade: 210x150 mm Weight: 2.4 kg Weight: 1 kg ...... 61933 ...... 61856 Handspike 3 m * Edge shovel of light metal * Varnished, steel-reinforced, with ashwood handle. with carrying handle. Size of blade: 380x380 mm Weight: 11 kg Length: 1300 mm ...... 63321 ...... 61891 Sand plate of aluminium Trough * Road broom ”Piassava” * 4 mm thick. DIN 14060-St, of steel plate, with handle. Dim. (LxW): 1500x420 mm galvanized, with 2 folding handles. Bristle wood: 340x75 mm Weight: 4.3 kg Dim. (LxWxH): 600x400x120 mm Handle hole: Ø 27 mm ...... 61880 Weight: 3.5 kg Length of bristle: 135 mm ...... 83411 Wooden handle: 1400x28 mm (somewhat pointed) Weight: 0.8 kg ...... 98916

Some articles may not be available in * = not illustrated 62 specific countries. Details on request. Kap. 08-63 12.04.2005 15:02 Uhr Seite 61

SAFETY, DANGER AND PROHIBITION SIGNS

Danger sign ”Ölspur” Yellow with black wording, light 57542 reflecting. Aluminium plate, 2 mm thick. Dim. (LxW): 600x300 mm 57556 57603 57590 ...... 57556

Danger sign ”Ölunfall” * Yellow with black wording, light reflecting. 58144 57589 63837 Aluminium plate, 2 mm thick. 57712 Dim. (LxW): 600x300 mm ...... 57548

Danger sign ”Unfall” * Yellow with black wording, light Danger sign with insignia reflecting. Sign stand TOP ”Explosives” Aluminium plate, 2 mm thick. consisting of: DIN 4844, triangular, length of sides Dim. (LxW): 600x300 mm base (57713) with 3 foldable feet of 400 mm, yellow background with ...... 57554 aluminium and 2 pipes that fit into black edges and insignia, light each other with 1 fixed and 2 reflecting. Danger sign ”Betreten der Einsatz- adjustable clamps for fixing the signs, Plastic, 2 mm thick. stelle verboten” * pipe (57705)...... 57603 Yellow with black wording, light Dim. (collapsed): 830x100 mm reflecting. Weight: 4.5 kg ...... 57712 Danger sign with insignia Plastic, 2 mm thick. ”Causic agent” Dim. (LxW): 600x300 mm Base for sign stand TOP DIN 4844, triangular, length of sides ...... 57608 Foldable. 400 mm, yellow background with Weight: 1.3 kg ...... 57713 black edges and insignia, light Traffic warning sign with insignia reflecting. ”Danger” Extension pipe for sign stand TOP Plastic, 2 mm thick. Triangular, length of sides 450 mm, Length: 650 mm ...... 57705 ...... 58144 light reflecting. Barrier for use in halls, buildings and Danger sign with insignia Aluminium plate, 2 mm thick in terrain with hard ground * ”Radiation” ...... 57542 consisting of galvanized barrier DIN 4844, triangular, length of sides Plastic, 2 mm thick * support (art. No. 61251). Safe stand, 400 mm, yellow background with ...... 57537 with hooks. 08 black edges and insignia, light Height: 800 mm reflecting. Prohibition sign with insignia Weight: 2 kg ...... 61271 Plastic, 2 mm thick. ”Not allowed for any kind of ...... 57589 vehicle” * Barrier support for driving into the Ø 600 mm, red/white, light reflecting. ground * Danger sign with insignia of galvanized round steel 12 mm. ”Flammable” Aluminium plate, 2 mm thick Length: 1120 mm DIN 4844, triangular, length of sides ...... 57544 Weight: 1 kg ...... 61251 400 mm, yellow background with Plastic, 2 mm thick black edges and insignia, light ...... 57535 Base ”TOP” * reflecting. art. No. 57713 with sleeve Plastic, 2 mm thick. Prohibition sign with insignia (art. No. 61255) for barrier support ...... 63837 ”Open fire and smoking not (art. No. 61251). allowed” * Weight: 1.6 kg ...... 61260 Danger sign with insignia DIN 4844, Ø 400 mm, white back- ”Poison” ground, red edges and bar, black ZIEGLER T-shaped support for DIN 4844, triangular, length of sides insignia, light reflecting. driving into the ground * 400 mm, yellow background with galvanized steel, 30 mm, lower end black edges and insignia, light Aluminium plate, 2 mm thick pointed, with hooks for barrier railing reflecting...... 57600 or safety lights. Plastic, 2 mm thick. Plastic, 2 mm thick Length: 1000 mm ...... 57590 ...... 57602 Weight: 2 kg ...... 61252

* = not illustrated Some articles may not be available in specific countries. Details on request. 63 Kap. 08-64 12.04.2005 15:02 Uhr Seite 64

FOLDING SIGNS WARNING AND BARRIER DEVICES

Folding sign 2 sides ”Feuerwehr”, 57732 58114 57694 1 side ”Unfall”, 700 mm * Plastic-coated chemical fibre fabric. Total height 185 cm, rolled-up 6.5 cm Ø. Weight: 2.5 kg ...... 57734 57695 Set of warning devices for highways * consisting of: -10 traffic cones 750 mm, art. No. 57694 -3 flashing lights for traffic cones, art. No. 58114 -3 folding signs 900 mm ”Unfallgefahr”, Folding sign, 3-part art. No. 57741 Flashing light for traffic cone Plastic-coated chemical fibre fabric, -3 warning lights ”Euro-Blitz”, Can also be used as a hand light. abrasion-proof. White background, red art. No. 58160 Red plastic housing resistant to impact triangle, black wording. Hot galvanized -1 transport cart for traffic cones, and weather. Battery tube of light 3-leg frame, self-erecting. Can be art. No. 57704 metal. One-sided light with electronic rolled-up. Supplied with plastic cover. Weight: 78 kg flashing light, with 5 monocells...... 63220 Working time up to 80 hours. 3 sides ”Feuerwehr” Dim. (LxWxH): 100x180x630 mm Length of sides: 700 mm Barrier chain, black/yellow * Weight: 1.3 kg Weight: 2.5 kg PVC, links 6 mm strong...... 58114 ...... 57732 Length: 50 m Weight: 3.1 kg Traffic cone, red/white 3 sides ”Feuerwehr” * ...... 53794 In compliance with the German road Length of sides: 900 mm regulations, BAST-approved. Made of Weight: 5.1 kg Barrier chain, red/white * thermoplastics, weather-resistant, ...... 57736 PVC, links 6 mm strong. stackable. With 3 red and 2 white Length: 50 m reflecting stripes. 2 sides ”Feuerwehr”, 1 side ”Unfall” * Weight: 3.1 kg Length of sides: 900 mm ...... 53793 Cone 500 mm Weight: 5.1 kg Weight: 2.2 kg ...... 57738 Barrier tape, red/white * ...... 57695 08 PE, in roll-off carton, 80 mm wide. 3 sides ”Unfall” * Length: 500 m Cone 750 mm * Length of sides: 900 mm Weight: 1.5 kg Weight: 4.2 kg Weight: 5.1 kg ...... 63886 ...... 57696 ...... 57737 Barrier tape, yellow/black * MORION reflecting cone 1 side ”Feuerwehr”, 1 side ”Unfall”, PE, in roll-off carton, 80 mm wide. BAST-approved, retroreflecting, 1 side ”Ölunfall” * Length: 500 m weight class III. Length of sides: 700 mm Weight: 1.9 kg Weight: 2.5 kg ...... 53790 Cone 500 mm * ...... 57731 Weight: 2.8 kg Barrier warning tape, red/white ...... 57693 1 side ”Feuerwehr”, 1 side ”Unfall”, on both sides * 1 side ”Ölunfall” * Wording ”Feuerwehr-Sperrzone”, Cone 750 mm Length of sides: 900 mm tear-proof, 80 mm wide. Weight: 5.8 kg Weight: 5.1 kg Length: 500 m ...... 57694 ...... 57739 Weight: 1.5 kg ...... 53789 Transport cart * 3 sides with accident-insignia * for the transport of traffic cones and Length of sides: 900 mm, warning lights (set of warning devices white light reflecting, red fluorescent Please note: for highways). Weight: 5.1 kg The above signs and tapes are Dim. collapsed (LxWxH): ...... 57741 available with text in German only! 420x500x230 mm Weight: 8.5 kg ...... 57704

Some articles may not be available in * = not illustrated 64 specific countries. Details on request. Kap. 08-65 12.04.2005 15:01 Uhr Seite 65

WARNING VESTS - WARNING FLAGS VEHICLE ROOF SIGNS SIGNS FOR INSIDE USE

57698 57701 57650

57649

67329

57651 67273

Warning vest Vehicle roof sign Inside sign EN 471, red-orange, fluorescent, with ”Feuerwehr im Einsatz” ”Feuerwehr im Einsatz” 2 all-around silver-coloured reflecting Magnetic sign of yellow plastic Yellow plastic sign, flat. stripes. material, triangular shape. Dim. (LxW): 200x150 mm Weight: 0.25 kg Top speed 130 km/h...... 57649 Standard version Dim. (LxWxH): 260x160x140 mm ...... 57698 ...... 57650 Inside sign ”FEUERWEHR” With the wording ”FEUERWEHR” * Vehicle roof sign, illuminated, with 2 suction cups...... 57699 ”Feuerwehr im Einsatz” 1.5 mm weather and UV resistant White sign of polycarbonate with red plastic. Warning vest letters. Flashing illumination 2x 21 W Dim. (LxW): 400x100 mm EN 471, yellow, with 2 all-around with electric flasher relays, 6-pole ...... 67329 silver-coloured reflecting stripes. The annular magnets (2 pcs.) for adhesion wording ”FEUERWEHR” in black. to the vehicle roof, spiral cable and Magnet foil sign Weight: 0.25 kg plug for cigarette igniter 12 V. ”FEUERWEHR” ...... 57701 Top speed 160 km/h. Background white, wording red. Dim. (LxWxH): 280x110x120 mm Dim. (LxW): 150x500 mm Bag for warning vests * ...... 57651 ...... 67273 Orange, PVC-coated, with velcro fastener. Warning triangle * ...... 57697 In compliance with the German road 08 regulations. Collapsible, light reflecting. Warning flag, white-orange-white * Comes in plastic case. In compliance with the German road Length of sides: 440 mm regulations. Polyester fabric, with Weight: 1.7 kg plastic handle of 800 mm...... 57716 Dim. (LxW): 500x500 mm Weight: 0.2 kg ...... 57755

Warning flag, white-orange-white * In compliance with RSA and DINEN471. With wooden handle of 800 mm. Dim. (LxW): 500x500 mm Weight: 0.2 kg ...... 57722

Set of flags 500x500 mm, 4 pcs. * Version C, with handle of 800 mm, (1 red, 1 green, 1 yellow, 1 blue) ...... 57721

Bag for warning flag * Weight: 0.15 kg ...... 55118

* = not illustrated Some articles may not be available in specific countries. Details on request. 65 Kap. 08-66 12.04.2005 15:00 Uhr Seite 64

TRAFFIC BATONS FOR THE FIRE SERVICE HAND LOUDSPEAKERS

Traffic batons for the fire service 19354 Plastic disk with a diameter of approx. 200 mm. A screw-on handle with 55583 plastic grip and leather loop for inserting 3 babycells at 1.5 V. The plexiglas cap in the centre of the 55571 signal disk has coloured, screwed-on cellone lenses and a metallized reflector that emits a strong coloured light and at the same time illuminates the whole signal disk. With bulb 3.5 V. Length of baton 500 mm.

Traffic baton * Single face with red continuous light. On both sides with the reflecting Traffic baton Hand loudspeaker type HM-012 S wording ”HALT FEUERWEHR” on red Double face with red continuous with variable-sound siren. Range in background. ON/OFF button. light and the reflecting wording the open air up to approx. 500 m. Depth: 40 mm ”HALT FEUERWEHR” on red Max. 10 W, power supply 8 mignon- Weight: 0.5 kg background. On the back side with cells (UM-3), working time approx...... 19353 green continuous light and the 6 hours. reflecting wording ”STRASSE FREI” Housing and funnel of ABS plastic. Traffic baton * on green background. One button With volume control and carrying strap. Single face with red continuous light each for red and green light. Colour: red and the reflecting wording ”EINSATZ Depth: 80 mm Dim. (LxØ): 315x190 mm FEUERWEHR” on red background. Weight: 0.6 kg Weight: 1 kg On the back side the same wording ...... 19354 (with batteries 1.5 kg) (non-reflecting) and a light control ...... 55583 device. Traffic baton * Depth: 40 mm Double face, neutral, otherwise as Shoulder megaphone type SM-020 S Weight: 0.5 kg art. No. 19354. with removable microphone and ...... 19352 ...... 19358 shoulder belt. Variable-sound siren, range up to approx. 1000 m in the Traffic baton * Traffic baton * open air. Single face with red continuous light, Double face with red continuous Max. 20 W, power supply 6 babycells neutral. light and the reflecting wording (UM-2), working time approx. 8 hours. 08 Weight: 0.5 kg ”HALT FEUERWEHR“ on red Housing and funnel of ABS plastic...... 19381 background. Colour: white/light brown Depth: 80 mm Dim. (LxØ): 375x211 mm Weight: 0.6 kg Weight: 1.7 kg ...... 19359 (with batteries 2.5 kg) ...... 55571 Bulb 3.5 V * for traffic baton with screw-on handle. Hand loudspeaker type HM-020 S * ...... 19355 with variable-sound siren. Range in the open air up to approx. 1000 m. Bulb 3.5 V * Max. 20 W, power supply 6 babycells for traffic baton with plug-on handle. (UM-2), working time approx. 8 hours...... 19356 Housing and funnel of ABS plastic. With volume control and carrying strap. Colour: red/white Dim. (LxØ): 375x211 mm Weight: 1.7 kg (with batteries 2.5 kg) ...... 55570

Some articles may not be available in * = not illustrated 66 specific countries. Details on request. Kap. 08-67 12.04.2005 15:00 Uhr Seite 65

WARNING LIGHTS

58157 58155 58132

58131

58135

Tri-Blitz 2 F * Tri-Blitz 1 DBP Warning flashing light ”ULO” StVZO Universal warning and traffic guiding Triple flashing unit for securing sites of with test certificate acc. to German light. The three lamps can be adjusted accidents or danger. By folding the top road regulations. With yellow diffusing to simultaneous flashing or to an lamp backwards, the warning light can lens for flashing light 60x70 mm, extremely bright running light (left to be seen from two sides. Consisting of with transistor blinker unit, 2 bulbs right). By means of the suction holder 3 orange flashing lamps (the top two of 6 V/2.4 W and 5 monocells 1.5 V. (available as accessory) the Tri-Blitz which can be folded), spray water Dim. (LxWxD): 230x105x50 mm can be fixed anywhere. protected housing, reversible running Weight: 0.8 kg Light power: 2 WS per flash flash direction with 2 batteries...... 58131 Flash frequency: 180/min, ON/OFF switch and charging socket 6 m of cable with plug for trailer socket are protected by special turning locks. Case for warning flashing light 12-24 V Working time approx. 15 hours. art. No. 58131, grey plastic. Dim. (LxWxH): 700x200x120 mm Dim. (LxWxH): Dim. (HxWxD): 260x120x65 mm Weight: 4.3 kg folded: 280x210x340 mm Weight: 0.15 kg ...... 58156 open: 280x210x725 mm ...... 58132 Weight (ready for use): 11.7 kg Tri-Blitz 2 F ...... 58155 Electronic flashing light as art. No. 58156, but with 6 m of EURO-BLITZ * cable with plug DIN 14090 for charging Set of batteries 6 V/9.5 A * with built-in battery charger. Portable, socket A16. for Tri-Blitz DBP (set = 2 pcs.). for quick securing of sites of accidents Dim. (LxWxH): 700x200x120 mm ...... 58147 or danger. Steady and non-skid Weight: 4.3 kg through low centre of gravity and oil- 08 ...... 58157 Charger * resistant rubber feet. The two-way for Tri-Blitz DBP, 12 V, for connecting flash head consists of 2 orange lenses, Universal suction holder * to 230 V. Ø 180 mm, with integrated handle. for Tri-Blitz 2 F, with link pin, ...... 58148 Shock and weather proof plastic Ø 30 mm. housing for the Dry-Fit batteries. The ...... 58158 Charger for Tri-Blitz 1 DBP * new locking system is flush-mounted 12/24 V, for trickle charge in a vehicle. in the housing. In the housing lid Roof plug-on arrangement * The charging rate from the vehicle is there are 2 double rocker-type Aluminium, for Tri-Blitz 2 F, with fixing approx. 1.2 A. switches, ON/OFF for flashing light plate and rubber sealing plate, Dim. (LxWxH): 60x80x160 mm (60 flashes/min) and flashing light Ø 30 mm...... 58150 with continuous beam. Height: 225 mm Light power 2 WS...... 58159 Safety warning flashing light The EURO-BLITZ is run by the ”HELLA 3003” maintenance-free Dry-Fit battery Mounting bridge * with test certificate acc. to German and features overload and excess for one Tri-Blitz 2 F. road regulations. discharging protection...... 58173 Shock-proof plastic, spray-water proof. Working time approx. 13 hours. With orange flashing light and bright Flashing light with continuous beam Swivel device for mounting bridge * working light with 5 monocells 1.5 V, 11 hours. for Tri-Blitz 2 F. bulb 6 V/2.4 W and vehicle holder. Dim. (LxWxH): 190x160x390 mm ...... 58174 Dim. (HxWxD): 280x115x60 mm Weight: 3.5 kg Weight: 0.9 kg ...... 58160 ...... 58135

* = not illustrated Some articles may not be available in specific countries. Details on request. 67 Kap. 08-68 12.04.2005 14:59 Uhr Seite 66

WARNING LIGHTS AND NON-ELECTRIC LIGHTING EQUIPMENT

EURO-BLITZ Synchron * Charger 58161 Mobile, programmable electronic ADALIT AD 1000 CM * flashing light for quick securing of sites Electronic charger for hand light of danger and accidents and for traffic L-2000 ATEX for connection 230 V, directing. By means of an infrared 50/60 Hz, incl. socket power unit. transmission system any number of Power input: 0.35 VA EURO-BLITZ Synchrons (of the same Dim. (LxWxH): 100x100x90 mm type) can be combined to a chain of Weight: 0.5 kg ...... 58095 172055 flashing lights. It can be used as synchronized light or running light. Charger 4 foldable feet and storage battery ADALIT AD 1000 CV, 12 V * 6 V/6.5 Ah and charging adaptor. Power input: 0.35 VA Dim. (LxWxH): 190x160x390 mm Dim. (LxWxH): 120x110x90 mm Weight: 3.3 kg ...... 58182 Weight: 0.5 kg ...... 58091

Dry-Fit storage battery * Charger EURO-BLITZ E 2 for EURO-BLITZ, art. Nos. 58160 and ADALIT AD 1000 CV, 24 V * for vehicle charging 58161, as well as EURO-BLITZ for mounting in a vehicle. as EURO-BLITZ, art. No. 58160, but Synchron, art. No. 58182, 6 V/6.5 Ah. Power input: 0.35 VA for vehicle charging (vehicle version). Weight: 0.5 kg ...... 58143 Dim. (LxWxH): 120x110x90 mm Weight: 3 kg Weight: 0.5 kg ...... 58092 ...... 58161 Case * for 4 pieces EURO-BLITZ Synchron. Triple chargers on request. Vehicle charger Weight: 0.8 kg ...... 58183 for EURO-BLITZ E 2, art. No. 58161. Safe charging via the vehicle electric 58090 system, connection to 11 - 29 V. Weight: 0.3 kg ...... 172055

58181 57813

58611

08 57821

Non-electric lighting equipment and Hand light ADALIT L-2000 ATEX accessories Rechargeable multi-function hand light. Yellow/black. Certified for use in Wax torch spaces liable to contain explosive with torch stick, burning time 2 hours. mixtures, zone 1 + 2, ATEX 2 GD EEx ib Package of 25 pieces. TELE-BLITZ e IIC T4. With tiltable reflector that can Weight: 0.3 kg ...... 57813 Electronic flashing light, traffic cone be fixed in 2 positions. Light housing and EURO-BLITZ in one and the same of durable thermoplastic, resistant to Torch holder unit. The light spot height can be blows, chemicals, impacts and DIN 14641, black, for fixing in walls, increased up to 95 cm by means of a scratches. 4 mm thick hardened glas tree-trunks etc. rugged telescope. When the telescope disk. Water and dust proof, IP 67. Weight: 0.2 kg ...... 58611 is extended it serves as a red/white Storage battery: NiMH-accumulator traffic cone. With 4 foldable and (maintenance-free, without memory Magnesium torch extensible feet. With one-way effect, low damage to the environment) White, with wooden handle, burning continuous light and dimmed light at Illuminant: Quarz/halogen 6 V/4 W time 10 min. night. Battery 6 V/6.5 Ah and charging Light period: 4 h Dim. (LxØ): 645x25 mm adaptor. Light flux: 50 lm Weight: 0.5 kg ...... 57821 Dim. (LxWxH): 215x155x450 mm Durability: 300 h Weight: 4.2 kg Charging period: max. 12 h Bengal lights * ...... 58181 Dim. (LxØ max.): 210x80 mm 1 package = 10 boxes at 12 pieces Weight: 0.7 kg plus 1 box of matches...... 58090 ...... 57867

Some articles may not be available in * = not illustrated 68 specific countries. Details on request. Kap. 08-69 12.04.2005 15:06 Uhr Seite 1

presents: The wo rldwide smalles presents: enset and quietes t t 9kVA-DIN-g t13kVA- smalles DIN-genset The worldwide

electric capacity: 13 kVA electric capacity: 9 kVA dimensions: 820 x 440 x 580 mm (8000 DIN) dimensions: 700 x 440 x 580 mm (5000 DIN) weight: 150 kg weight: 126 kg

noise power level: 84 – 91dB(A)/pW (LWA) •dimensions and weight according to DIN 14685. •Supersilent with soundproof canopy (BSKA 13 EV). •New patent applied design of the exhaust and airflowsystem. •The 9kVA fitted into the DIN-5kVA-frame (BSKA 6,5 and BSKA 9). •Best applicable for welding transformer, inverter, ventilator, pumps and elektronic equipment. •Variospeed •Speed control dependent on load sets new standards. •Speed reduction in stand-by mode reduces noise pollution for machinists. •Fuel savings up to 25%

•Maintenance-free Generators •New special designed brushless highpower-generator. •Protection class IP 54. Kap. 08-70 12.04.2005 15:15 Uhr Seite 68

SEARCH LIGHTS AND ACCESSORIES

Hand search lights, series HSE/HSEL Slip-on filter, colourless * 58264 EISEMANN, for hand search lights HSE 5, HSE 7, ex-protected in compliance with HSEL 7 and SEB 8, SEB 8 L. EN 50014/VDE 0171, EEx e ib II T4, ...... 58269 PTB-approv. No. Ex-94.C.2049, IP 65, complying with EN 60529, designed in Replacement bulb 5.5 V/5.5 W * compliance with DIN 14642. (Halogen), for EISEMANN HSE 7, Integrated electronics (EMV-approved) HSEL 7 and CEAG SEB 8, SEB 8 L. for lamp and charging control with the ...... 58218 functions excessive discharging protection, broken filament control, Replacement battery 4.8 V/7 Ah * test of economy bulb, capacity indica- Gastight, for HSE 7, HSEL 7 and tor with 5 LEDs. Flashing light with CEAG SEB 8. main bulb. IOI charging characteristic Weight: 1.2 kg curve. Only the used energy is supple- ...... 57886 mented. Automatic switch-over to impuls trickle charge. Hand search light HSE 7 Charger LS 12/24 * Black rugged abrasion and impact- complete with gastight NiCd battery for fitting into vehicles, suitable for proof plastic housing, antistatic even BAN 4.8/7 g-Ex (4.8 V/7 Ah) and HSE 5, HSE 7 and HSEL 7. With at freezing temperatures. Wearresisting halogen main bulb 5.5 V/5.5 W. gastight batteries. Solid black housing charging contacts for the chargers Reach approx. 110 m at 1 lux, of plastic. LS 12/24 and LS 230. Simple removal light aperture Ø 100 mm, Do not use the charger in places from the charger without unlocking approx. operating time (continuous liable to contain explosive mixtures! device. Infinite focusing results in light) 6.5 h/charge, flashing light 23 h. Input power: 10 - 30 V optimum reach of light. With colourless Standard charging time with LS 12/24 Charging time: see HSE searchlights, prism slip-on filter for equal illumination or LS 230: 0 ... 14 h. degree of protection III of the working area. Searchlight head Dim. (WxHxD): 120x325x147 mm Dim. (WxHxD): 152x145x135 mm can be tilted 20º to the front and 90º Weight: 2.1 kg (complete) Weight: 0.7 kg backwards. The searchlight is supplied ...... 58264 ...... 58266 with a colourless prism slip-on filter, reflecting stripe, key and operating Hand search light HSEL 7 * 58267 instructions. complete with gastight NiCd battery BAN 4.8/7 g-Ex (4.8 V/7 Ah), 230 V Attention: For the searchlight of the charging part and halogen main bulb. HSE/HSEL series only BOSCH- Power cord in dustproof compartment. batteries type BAN-Ex should be Reach approx. 110 m at 1 lux, used. Only these batteries are light aperture Ø 100 mm, 08 approved for the series and comply approx. operating time (continuous with the regulations. If other batte- light) 6.5 h/charge, flashing light 23 h. ries are used, the explosion-protec- Standard charging time with LS 12/24 tion approval of the searchlight is or LS 230: 0 ... 14 h. invalid! Dim. (WxHxD): 120x325x147 mm Weight: 2.5 kg (complete) Hand search light HSE 5 * ...... 58265 complete with light, gastight NiCd battery BAN 4.8/5 g-Ex (4.8 V/5 Ah) Set of slip-on filters for and inert gas main bulb 4.8 V/4 W. EISEMANN HSE and CEAG SEB * Charger LS 230 Reach approx. 100 m at 1 lux, Red, orange, colourless. for mains power supply. Suitable for light aperture Ø 100 mm, ...... 58268 HSE 5, HSE 7 and HSEL 7. With approx. operating time (continuous gastight batteries. Housing of black light) 5 h/charge, flashing light 20 h. Warning light cap, orange * plastic/cast aluminium. Power cord Standard charging time with LS 12/24 for EISEMANN HSE and CEAG SEB. 2 m, with Euro plug, with LED for or LS 230: 0 ... 10 h...... 58270 mains function. Dim. (WxHxD): 120x325x147 mm Do not use the charger in places Weight: 1.8 kg (complete) Replacement bulb 4.8 V/4 W * liable to contain explosive mixtures! ...... 58263 (Inert gas) base BA 15d, for HSE 5. Input power: 230 - 250 V ...... 58253 Frequency: 50 - 60 Hz Replacement NC battery 4.8 V/5 Ah * Charging time: see HSE searchlights, Gastight, with plug, for HSE 5. Replacement bulb 4.8 V/1.5 W * IP 31, degree of protection II Weight: 0.8 kg (Economy bulb), for EISEMANN HSE Dim. (WxHxD): 164x151x111 mm ...... 57887 and CEAG SEB. Weight: 1.3 kg ...... 58254 ...... 58267

Some articles may not be available in * = not illustrated 70 specific countries. Details on request. Kap. 08-71 12.04.2005 15:14 Uhr Seite 69

HAND SEARCH LIGHTS AND ACCESSORIES

Hand search light HEB 100 EN * Replacement battery 58260 EISEMANN, BAS 4.8/7 g-Ex * ex-proof in compliance with Gastight, with screw and spring EN 50014/VDE 0171 EEx E ib C T4. contacts. For HK, HKE, HKEB, HKEB With gastight NiCd battery, charging EN and HEB 100 EN. state indicator, excessive discharging Dim. (WxHxD): 79x103x103 mm protection, broken filament control, Weight: 1.2 kg flashing light with main and economy ...... 58252 bulb. Rugged abrasion and impact- proof housing, also below freezing. Replacement bulb 4.8 V/1.5 W * Reach approx. 100 m at 1 lux, (Economy bulb), for HK, HKB, HKE, light intensity over 15000 cd after 4 h, HKEB, HKEB-N, HKEBL-EN, light aperture 100x100 mm, IP 54. HEB 100 EN. Dim. (WxHxD): 122x302x151 mm ...... 58254 Weight: 1.9 kg (with battery) ...... 58251 Replacement bulb 4.8 V/4 W * (Inert gas) base BA 15d. For HKEB, Hand search light SEB 8 L Charger L 507 * HKEBL-EN and HEB 100 EN. as art. No. 58259 above, but with for mains supply. For HEB 100 EN, HK, ...... 58253 integrated charger and mains HKB, HKEB-EN and HKEBL-EN. connection cable. With gastight batteries. Housing of CEAG hand search light, series SEB ...... 58260 acid and alkali resistant plastic, Ex-proof in compliance with EN 50014, selfquenching. The charger must not VDE 0171, EEx e ib II T 4, Accessories: Please see page 70. be used in places liable to contain PTB approv. No. Ex-94.C.2045, IP 65 explosive mixtures. in compliance with EN 60529, Further accessories for CEAG Input power: 230 V complying with DIN 14642. hand search lights, series SEB Frequency: 50 - 60 Hz Certified for use in zone 1 and 2, Charging time: 14 h temperature class T 4. Vehicle charger 90 (degree of protection II) Housing of black polyamide. for vehicle mounting. Dim. (WxHxD): 137x237x140 mm The electronics are protected against For SEB 8/SEB 8 L. With gastight Weight: 2 kg electromagnetic fields (EMC). In the batteries. Black plastic housing...... 58208 event of a broken filament and toward Input power: 10 - 30 V the end of the battery capacity, the Dim. (WxHxD): 152x145x135 mm Charger L 507 F * lamp will automatically switch over Weight: 0.7 kg for vehicle mounting. For HK, HEB 100 from main beam to pilot light...... 58220 EN, HKB, HKEB-EN and HKEBL-EN. 5 LEDs provide continuous information With gastight NiCd batteries. Housing on the current operating/charging of acid and alkali resistant plastic, state. The electronics also protect 08 selfquenching. The charger must not against excessive discharging and be used in places liable to contain overcharging. The SEB can be charged explosive mixtures. from the vehicle battery by means of Input power: 12/24 V, the vibration-proof vehicle holder change-over type (10 - 30 V) or from the mains supply by Charging time 12 V: 14 h means of the LG 443 charger. Charging time 24 V: 25 h A colourless slip-on filter, key and (degree of protection III) operating instructions are supplied Dim. (WxHxD): 137x237x140 mm with the searchlight. 58221 58220 Weight: 1 kg ...... 58215 Hand search light SEB 8 * complete with gastight NiCd battery Warning light cap, orange * 4.8 V/7 Ah and halogen bulb for HKB, HKEB, HKEB-EN, HEB 100 5.5 V/5 W and pilot lamp 4.5 V/1.5 V. EN and HKEBL-EN. Reach approx. 100 mat1lux, Charger LG 443 Dim. (HxØ): 60x100 mm light aperture 98 mm Ø, approx. for mains supply. Weight: 0.2 kg operating time (continuous light) For SEB 8/SEB 8 L. With gastight ...... 58296 6.5 h/charge, flashing light 23 h. batteries. Black plastic housing. Standard charging time with vehicle Input power: 230 - 250 V Slip-on filter, colourless, granulated * charger 90 or LG 443: 0 ... 14 h Frequency: 50 - 60 Hz for HK, HKE, HKB, HKEB, HEB 100 Dim. (WxHxD): 120x325x147 mm Dim. (WxHxD): 164x151x111 mm EN, HKEB-EN and HKEBL-EN. Weight: 2.1 kg (with battery) Weight: 1.3 kg ...... 58295 ...... 58259 ...... 58221

* = not illustrated Some articles may not be available in specific countries. Details on request. 71 Kap. 08-72 12.04.2005 15:14 Uhr Seite 70

ACCESSORIES FOR HAND SEARCH LIGHTS FURTHER LIGHTING EQUIPMENT

58361 58165 58122

58110

58169

58111

58205

ROBIN triple charger NiCa II CEAG ex cap light HLE 7 L EN Flashlight UK 4 AA ES 1 for hand search lights HSE/SEB. Suitable as working and inspection Universal pocket and helmet flashlight Economical solution for simultaneous lamp. Approved for use in zone 1 and with rubber push-button ”ON/OFF”. charging of 3 searchlights of the new 2 up to temperature class 4. 100% water and dustproof. Rugged generation. Type of protection EEx e IB II C T4. yellow ABS housing, extremely bright Input power: 230 V PTB approval Ex-89.C.2156. xenon bulb in prefocused quality Frequency: 50 Hz Housing of impact resistant reflector, pressure balance valve, non- IP 31, degree of protection II polyamide. conductive, corrosionless. Dim. (LxWxH): 500x145x165 mm Consisting of a headpiece, highly Ex approved. Power 2 W. Weight: 5.4 kg flexible cable and a battery with Operating time: 4 - 5 h ...... 58361 integrated charger. Reach of light: 100 - 120 m Battery: 3-cell, maintenance-free NiCd Dim. (LxW): 155x40 mm battery 3.6 V/7 Ah Weight: 148 g (incl. 4 batteries at 1.5 V) 58120 Operating time: 8 h ...... 58205 Dim. (LxWxH): 122x74x184 mm (battery part without headpiece) Flashlight UK 4 AA EN 2 Weight: 2 kg (with battery) with rotary head switch, waterproof ...... 58122 down to 5 m. Yellow. Incl. 4 alkali batteries. Ex-protected in compliance Headband for HLE 7 L EN with EU standard. for wearing the headpiece on the Reach of light: 100 - 120 m 08 helmet. Length: 155 mm ...... 58111 Weight: 148 g ...... 58165 Belt for HLE 7 L EN for wearing the headpiece on the body. Fixing device for helmet, plastic ...... 58110 Swingable, for flashlight UKE 4 AA...... 58169 Magazine hand lamp, ex-proof Replacement battery insert * with bulb 230 V/60 W, with 10 m cable for HLE 7 L EN. Flashlight UK SL 4, halogen * H 07 RN-F 3G 1.5 with ex-proof plug ...... 58109 Lamp with tumbler switch, rubber EEx de II CT 6, 230 V, 16 A 3 P. protected lamp head. Hand loop with Weight: 5 kg Flashlight UK 2 AAA pocket light, lock knob. Waterproof down to 150 m...... 58120 halogen * Ex-protected in compliance with US with clip, key ring and 2 alkali batteries. standard. Yellow. Waterproof down to 10 m. Yellow. Length: 155 mm Reach of light: 50 m ...... 58164 Length: 750 mm Weight: 35 g Flashlight UKE Sun Light SL 6, ...... 58166 halogen * The absolutely brightest diver lamp in compact and rugged design. Water- proof down to 150 m. Yellow. Reach of light: 150 - 200 m Length: 210 mm Weight: 585 g ...... 58163

Some articles may not be available in * = not illustrated 72 specific countries. Details on request. Kap. 08-73 12.04.2005 15:13 Uhr Seite 71

HANDHELD LIGHTS AND ACCESSORIES

58189 57888 58188 58124 58187 58186 58261

58262

181554

Ex-proof handheld lights Stabex HF MAG-LITE flashlights Multi Comfort Charger and Stabex mini Made in USA. Housing of high-strength for quick charging. Prevents excess Complying with EN 50014 to 50020. aircraft aluminium. Anodized on the charging by means of high-quality Stabex mini is approved for temperature inside and outside the lights feature automatic switch-off system. Trickle class T5 and Stabex HF for class T4 max. resistance to corrosion and high charge for keeping the cells fully and can thus be used in almost all reliability. Spray-water protected by charged. Discharge function for every places liable to contain explosive means of O-rings. charging cell prevents memory effect. mixtures. Computer calculated reflectors ensure For NiMH and NiCd storage batteries extraordinary high and even luminous of any capacity. Identification of Stabex HF power as well as infinite adjustment of defective cells by electronic testing. Type of protection EEx ia e IIC T4 for beam from flood to spot light. Protection against pole reversal zone 1 and 2. PTB approv. No. Replacement krypton bulb is included through electronic test, micro- Ex-94.C.2047. in the end cap of every flashlight processor control of charging and Black housing of polycarbonate. (except the MAG-CHARGER). discharging. Light aperture Ø 48 mm, Without batteries...... 57888 bulb 2.8 V/0.5 A, IP 65 in compliance with EN 60529. MAG-LITE 5 D-Cell Dry-cell batteries, not rechargeable * Battery: 2 monocells R 20/LR 20 (not Flashlight for 5 monocells, black. included), operating time 12 h. Length: 435 mm Monocell 1.5 V, IEC-R 20 Dim. (LxØ): 220x44/60 mm ...... 58189 ...... 57892 Weight: 0.25 kg (without batteries) ...... 58261 MAG-LITE 4 D-Cell Babycell 1.5 V, IEC-R 14 08 Flashlight for 4 monocells, black...... 57891 Stabex mini Length: 375 mm Type of protection EEx ia e IIC T5 for ...... 58188 Mignoncell 1.5 V, IEC-R 6 zone 1 and 2. PTB approv. No...... 88137 Ex-94.C.2046. MAG-LITE 3 D-Cell Black housing of polycarbonate. Flashlight for 3 monocells, black. Microcell 1.5 V, LR 03 Light aperture Ø 23 mm, Length: 315 mm ...... 57893 bulb 2.2 V/0.4 A, ...... 58187 IP 65 in compliance with EN 60529. Block battery 9 V, IEC-F 22 Battery: 2 mignoncells R 6/LR 6 (not MAG-LITE 2 D-Cell ...... 88130 included), operating time 8 h. Flashlight for 2 monocells, black. Dim. (LxØ): 160x22/32 mm Length: 250 mm NiCd batteries, rechargeable * Weight: 0.07 kg (without batteries) ...... 58186 ...... 58262 Monocell 1.2 V/4500 mAh, MAG-CHARGER flashlight IEC-KR 20...... 57878 Pocket signal light Rechargeable, complete with 6 V with bright, wide beam. Transmitter storage battery stick, 12 V connection Babycell 1.2 V/2900 mAh, white/red/green. ON/OFF button and for car cigarette lighter, 230 V Euro IEC-KR 14...... 57880 morse key. With button and belt strap. power supply, charger holder and With 3 mignoncells 1.5 V, 2 fixing plates. Mignoncell 1.2 V/750 mAh, bulb 2.5 V/0.3 A, operating time 15 h. Length: 315 mm IEC-KR 6 ...... 57879 Dim. (LxWxH): 115x75x45 mm ...... 181554 Weight: 0.3 kg Block battery 9 V/120 mAh, ...... 58124 IEC-6 F 22...... 57881

* = not illustrated Some articles may not be available in specific countries. Details on request. 73 Kap. 08-74 12.04.2005 15:12 Uhr Seite 72

SPOTLIGHTS/ SEARCHLIGHTS AND ACCESSORIES

By using the joint D 24, art. No. 474402, 58286 it fits to the vehicle tripods and together with the standard tube DIN 470274 14640, Ø 30 mm, it can be fixed to the tripods art. Nos. 58411 and 58413. Dim. (WxHxD): 260x230x260 mm Weight: 2.7 kg 58231 ...... 58231

470412 Halogen bulb * 12 V/100 W, for spotlight art. No. 58231...... 58233

58417 474402 Halogen bulb * 24 V/250 W, for spotlight art. No. 58231...... 58306 Halogen spotlight for 12 V or 24 V Lighting balloon Powermoon 2000 W Black housing, with hand grips on two Joint D 24 - Wording on request - sides for horizontal and vertical adjust- DIN 14640, chrome plated, with 2 star The portable light for optimum ment. With built-in switch. grips. Vertical adjustment approx. 135º. illumination. The diffusing balloon Light aperture Ø 250 mm. With peg Ø 24 mm, tube 30 mm I.D. cover ensures high light efficiency 2.5 m cable H 07 RN-F 2G 1.5 and Dim. (HxWxD): 110x140x120 mm without disturbing glare. Powerful waterproof plug DIN 14690. Weight: 1.7 kg halogen bulb, immediately ready for Without halogen bulb...... 474402 use. The body material is cast Together with the joint D 24, aluminium and stainless steel. DIN 14640, art. No. 474402, it fits to Joint LZU 11/5 Connected wattage: 2000 W the vehicle tripods as well as our for mounting spotlight with mounting Power supply: 230 V/50 Hz tripods art. Nos. 58411 and 58413. socket of Ø 24 mm on equipment with Diameter of balloon: 900 mm Dim. (WxHxD): 270x320x170 mm standard peg Ø 30 mm, DIN 14640. Height of balloon Weight: 3.5 kg With bolt lever and star grip for (reflector and diffusor): 600 mm ...... 470274 clamping. Dim. (LxØ): 2000x200 mm Field of traverse: 360º to the sides, plus yellow trafo box Slip-on filter 90º forwards and backwards. Transport weight of balloon: 8.5 kg for halogen spotlight art. No. 470274, Dim. (DxH): 145x135 mm We recommend the tripod art. No. white granulated, for light distribution, Weight: 0.5 kg 58288 as an accessory. Ø 250 mm...... 58417 ...... 58286 ...... 470412 08 Telescopic tripod * Lighting balloon Powermoon 1000 W * Halogen bulb * for lighting balloon. Aluminium. - Wording on request - 12 V/55 W, DIN 72601 YC, for spotlight Extensible up to 5.4 m, specially Incl. power supply unit and igniter. art. No. 470274. designed for use with the lighting The high efficiency HQI metal steam ...... 422144 balloon. lamp provides for high luminous Dim. folded (LxWxH): 1900x200x120 mm power at low connected load. Halogen bulb * Weight: 17 kg Connected wattage: 1000 W 24 V/70 W, DIN 72601 YC, for spotlight ...... 58288 Power supply: 230 V/50 Hz art. No. 470274. Diameter of balloon: 900 mm ...... 422064 Adaptor * Height of balloon for mounting the lighting ballon on the (reflector and diffusor): 600 mm Halogen spotlight for 12 V or 24 V joint D 24, art. No. 474402, or on the Dim. of transport case (LxWxH): IP 54. Housing of cast aluminium with joint, art. No. 58417, and thus suitable 1400x320x210 mm fins. Light aperture Ø 200 mm. With for fixing on the ZIEGLER tripod Weight of balloon with power supply hand grips on two sides for horizontal art. No. 58413. unit and cable: 22 kg and vertical adjustment...... 58242 Connection time: 4 - 5 min. 2.25 m cable H07RN-F 2G 1.5. We recommend the tripod art. No. Without halogen bulb. 58288 as an accessory...... 58285

Replacement halogen bulb for lighting balloon Powermoon 2000 W* ...... 58289

Some articles may not be available in * = not illustrated 74 specific countries. Details on request. Kap. 08-75 12.04.2005 15:12 Uhr Seite 73

FLOODLIGHTS AND ACCESSORIES

Floodlight with halogen bulb 58280 230 V/1500 W * Hours of lighting: approx. 2000 h 58413 Light flux: 33000 lm 58277 Light aperture: 220x350 mm Dim. (WxHxD): 450x360x220 mm Weight: 6.5 kg ...... 58278

Replacement halogen bulbs * Hours of lighting approx. 2000 h

230 V/ 500 W ...... 58533 58421 230 V/1000 W ...... 58534 230 V/1500 W ...... 58535 58257 230 V/2000 W ...... 58537 Halogen floodlight BS 1000 Telescopic tripod with halogen bulb 230 V/1000 W. Basket for floodlights Extensible up to a height of 4.65 m, Black splashproof aluminium housing The complete basket can be mounted galvanized, stable design. With with fins, hand grips for adjustment on the peg DIN 14640, e.g. tripod. 4 extensible stages, lockable in every and a carrying handle. The reflector is For 2 floodlights 1000 W. The unit is position. hammered and anodised. removable in one piece and can be put Retracted length 1.1 m. Each leg can Light aperture 120x250 mm, joint with on the ground or mounted on a tripod. be extended approx. 250 mm. tube for mounting on a tripod with peg ...... 183209 With standard peg C, Ø 30 mm, Ø 30 mm, 10 m cable H 07 RN-F 3G DIN 14640. 1.5 and safety plug. Weight: 15 kg Dim. (WxHxD): 310x330x160 mm ...... 58413 Weight: 5.2 kg ...... 58280 Anchoring set 58280 for tripod art. No. 58413, heavy-duty Halogen floodlights version (no camping version). Housing of die-cast aluminium with Essential in case of strong wind. large fins. 2 cable holders, joint with Consisting of 3 polypropylene ropes tube for mounting on a tripod with at 7 m, Ø 5 mm, on one end with loop peg Ø 30 mm, complying with DIN and snap hook 6x60, on the other end 14683. with self-locking plastic rope clamp for 10 m cable H 07 RN-F 3G 1.5 with quick rope tensioning. 3 galvanized 183209 safety plug DIN 49443. Special safety pegs. 08 glass that withstands even the highest Weight: 4 kg fluctuations in temperature...... 58421

Floodlight with halogen bulb Tripod * Floodlight mounting bridge 230 V/1000 W DIN 14683. Extensible up to a height for 2 floodlights. Cast aluminium, Hours of lighting: approx. 2000 h of 1.7 m. With peg C, Ø 30 mm, black. With mounting tube Ø 30 mm Light flux: 22000 lm DIN 14640. With plastic clamping I.D. and locking screw as well as 2 Light aperture: 220x265 mm devices and ground tips of glass fibre pegs Ø 30 mm. For fixing on floodlight Dim. (WxHxD): 340x360x220 mm reinforced plastic. tripod art. No. 58413 or 58411. Weight: 5.2 kg Retracted length: 1.06 m ...... 58277 Weight: 5 kg Floodlight mounting bridge 45 cm ...... 58411 for 1000 W floodlight, art. Nos. 58277, 58280. Weight: 0.9 kg ...... 58257

Floodlight mounting bridge 63 cm * Suitable for all floodlights. Weight: 1.8 kg ...... 58250

* = not illustrated Some articles may not be available in specific countries. Details on request. 75 Kap. 08-76 12.04.2005 15:11 Uhr Seite 74

ELECTRIC EQUIPMENT

Electric distributors Cable H 07 RN-F 3 x 2.5 * Complying with DIN VDE 0282-4. Attention! With plug DIN 49443, 16 A, 250 V With the introduction of the guideline and adaptor with safety contact 16 A, 82210 94/9/EG (ATEX) the ex-proof plug 250 V, IP 68. connections have been changed. To Complying with DIN EN 60529. ensure the compatibility it has been 82211 Length: 10 m laid down that the German fire Weight: 3 kg brigades are to use the following plug ...... 81963 connections (pls. see DIN 14555-3, appendix A): 230 V, 16 A, 3-pole, 6 h AC plug: 221239 221238 221237 type CEAG GHG 511 7306 R 0001 wall socket: type CEAG GHG 511 4306 R 0001 adaptor: Safety plug socket branch type CEAG GHG 511 3306 R 0001 Waterproof, type of protection IP 68, flange socket: with bayonet catch, 1 entry and type CEAG GHG 511 8306 R 0001 3 exits, for AC, up to 15 A. 400 V, 16 A, 5-pole, 6 h Weight: 1 kg three-phase current plug: ...... 82211 type CEAG GHG 511 7506 R 0001 221240 221244 221236 wall socket: Branch ”Deltabox” type CEAG GHG 511 4506 R 0001 3-branch safety plug socket 16 A/ adaptor: 230 V, 2 P + E, waterproof, with cable type CEAG GHG 511 3506 R 0001 of 1.5 m, with safety plug 16 A/230 V, Ex-proof plug connections flange socket: 2 P + E, not ex-proof. IEC 60309-1/2, type of protection type CEAG GHG 511 8506 R 0001 Weight: 1.3 kg IP 66 400 V, 16 A, 4-pole, 6 h ...... 82210 three-phase current plug: Adaptor EX 3-pole, 230 V/16 A type CEAG GHG 511 7406 R 0001 Weight: 0.7 kg 82212 wall socket: ...... 221237 type CEAG GHG 511 4406 R 0001 adaptor: Plug EX 3-pole, 230 V/16 A type CEAG GHG 511 3406 R 0001 Weight: 0.35 kg flange socket: ...... 221236 08 type CEAG GHG 511 8406 R 0001 Adaptor EX 4-pole, 400 V/16 A Please check your plug connections Weight: 1.7 kg for compatibility...... 221238

Plug connections for electric Plug EX 4-pole, 400 V/16 A equipment Weight: 0.7 kg in compliance with DIN 49442/43 and ...... 221244 VDE 0620. Adaptor EX 5-pole, 400 V/16 A Safety plug * Safety plug current distributor Weight: 1.7 kg 2-pole, with safety contact, for AC, Type of protection IP 68, with cable of ...... 221239 waterproof, with bayonet collar ring 1 m H 07 RN-F 3G 2.5, with safety and protective cap. plug 16 A/230 V, 3 exits 2 P + E, 16 A, Plug EX 5-pole, 400 V/16 A ...... 474111 230 V, with safety contact. Weight: 0.7 kg Dim. (WxHxD): 250x160x90 mm ...... 221240 Safety adaptor * Weight: 4 kg 2-pole, with safety contact, for AC, ...... 82212 waterproof, with bayonet catch cap...... 474308

Some articles may not be available in * = not illustrated 76 specific countries. Details on request. Kap. 08-77 12.04.2005 15:10 Uhr Seite 75

CABLE DRUMS

Ex-proof cable drums Drum with 50 m of rubber cable * 81955 H 07 RN-F 3 G 2.5, with ex-proof plug Attention! and adaptor 230 V, 16 A, 3-pole. With the introduction of the guideline Dim. (LxWxH): 500x310x380 mm 94/9/EG (ATEX) the ex-proof plug Weight: 22 kg connections have been changed. To ...... 81953 ensure the compatibility it has been laid down that the German fire Cable drum DIN 14680 brigades are to use the plug connec- Coiling body of steel, blue, waterproof, tions mentioned on page 76 (pls. see with carrying handles of wood and also DIN 14555-3, appendix A). foldable hand crank also used for fixing the drum. Current transmission Cable drum by 5 slip-rings, max. load 25 A. For Ex-proof, PTB-approved, coiling width AC and three-phase current. 420 mm, of galvanized steel, with Not ex-proof. brass feet. The foldable hand crank With external fixed reel for cable with can also be used for fixing the drum. Cable drum plug for connection to a generator. 2 extensible carrying handles with Ex-proof, coiling width 220 mm, coiling With large coiling body for cable with hand grip and locking bolts for vehicle body of hard rubber with auxiliary reel adaptor for connection to implements. bracket. Without slip rings. The cable and hollow shaft with cable duct for Both cables can be drawn off is passed through the coiling body to 5-pole cable. Without slip rings. individually. prevent sparking. Max. load 25 A. 5 m Dim. (LxWxH): 500x310x380 mm Coiling width 440 mm, style A2 of cable with plug for connection to a Dim. (LxWxH): 595x310x374 mm generator is coiled on an external Drum without cable * extension. The cables can be drawn Weight: 7 kg Drum without cable * off individually...... 81934 Weight: 9 kg Dim. (LxWxH): 573x310x377 mm ...... 81940 81964 Drum without cable * Drum with 50 m of rubber cable Weight: 11 kg H 07 RN-F 5 G 2.5 * ...... 81970 and with plug connection for three- phase current system CEE DIN Drum with 50 m of rubber cable EN 49462 on both ends. External 5 m Ex-proof, PTB-approved, coiling width of cable for connection to a generator. 420 mm, with 50 m of rubber cable Weight: 22 kg H 07 RN-F 5 G 2.5, on one end with ...... 81944 three-phase adaptor, on the other end with three-phase plug EEx de II CT 6, Cable drum DIN 14680 08 400 V, 16 A, 5 P. as art. No. 81940, but Weight: 36 kg coiling width 220 mm, style A1 ...... 81955 with external auxiliary reel for 5 m of connection cable. Dim. (LxWxH): 375x310x374 mm Attention: New ex-proof plug Drum with 50 m of rubber cable connections: Please check your H 07 RN-F 5 G 2.5, with ex-proof plug Drum without cable * further connections! and adaptor 400 V, 16 A, 5-pole. Weight: 7.5 kg Dim. (LxWxH): 500x310x380 mm ...... 81950 Weight: 28 kg ...... 81964

* = not illustrated Some articles may not be available in specific countries. Details on request. 77 Kap. 08-78 12.04.2005 15:30 Uhr Seite 76

CABLE DRUMS

81922 81960 81961

Drum with 50 m of rubber cable Solid-rubber cable drum Solid-rubber cable drum H 07 RN-F 3 G 2.5 in compliance with DIN 14555-3, in compliance with DIN 14555-3, with AC safety plug connection 230 V 400 V/230 V DIN 49442 and DIN 49443 on both with galvanized steel pipe support, with galvanized steel pipe support, cable ends. With external auxiliary black, type of protection IP 54, with black, type of protection IP 54, with reel for 5 m of cable for connecting thermal overload protection, 16 A. thermal overload protection, 16 A. to a generator. With 50 m of rubber cable H 07 RN-F With 50 m of rubber cable H 07 RN-F Weight: 19 kg 3 x 2.5, with safety plug IP 68. 5 G 2.5, with CEE plug 5x 16 A, 400 V...... 81922 Exit: 3 safety sockets IP 68 Exit: Dim. (LxWxH): 300x230x410 mm 1 CEE socket 5x 16 A Cable drum DIN 14680, style C 1/1 Weight: 16 kg 3 safety sockets IP 68 for low-voltage current * ...... 81960 Dim. (LxWxH): 340x430x480 mm with 25 m of rubber cable H 07 RN-F 4 G Weight: 25 kg 2.5, with waterproof plug connections Solid-rubber cable drum ...... 81961 for low-voltage current DIN 14690 on in compliance with DIN 14555-3, painted coiling body of steel. Steel 400 V/230 V * pipe support. with galvanized steel pipe support, Coiling width: 115 mm black, type of protection IP 54, without Dim. (LxWxH): 260x190x360 mm thermal overload protection. Weight: 10 kg With 40 m of rubber cable H 07 RN-F ...... 82118 5 x 6.0, with CEE plug 5x 32 A. 08 Exit: Cable drum DIN 14680 1 CEE socket 5x 32 A, 400 V style C 1/1 for AC 230 V * 2 CEE sockets 5x 16 A, 400 V Coiling body of steel, painted, with 1 safety socket IP 68 steel pipe support, overrunning brake Dim. (LxWxH): 340x430x480 mm and safety plug socket. Weight: 35 kg Coiling width: 115 mm ...... 81962 Dim. (LxWxH): 260x190x360 mm

Drum without cable Weight: 2.6 kg ...... 81918

Drum with 50 m of rubber cable H 07 RN-F 3 G 1.5 with solid-rubber plug. Weight: 10 kg ...... 82120

Some articles may not be available in * = not illustrated 78 specific countries. Details on request. Kap. 08-79 12.04.2005 15:29 Uhr Seite 75

DRILLING EQUIPMENT

63432 63434 63433

Hammer drill (set) Electronic Combination hammer Drill/screw driver with storage 230 V, 600 W, infinite rpm-control, pre- (rotary/demolition hammer) battery selectable number of impacts/impact 230 V, 1200 W, number of impacts 1700 mAh, keyless chuck 10 mm, force, hammer stop, rotation stop, 1300 rpm, infinitely adjustable. infinite rpm adjustment, right/left right/left rotation, complete with drill In transport case with the following rotation. chuck, auxiliary handle and transport accessories: With 2 storage batteries, charger and case. -3 pointed chisels screw driver inserts in the transport With the following accessories: -1 flat chisel case. Universal holder with SDS tang, -1 hard metal twist drill bit, With 1 set of screw driver inserts quick-change chuck and permanent 550 mm usable length consisting of: magnet. -1 hard metal twist drill bit, -magnetic universal holder Weight: 4.1 kg 270 mm usable length -screw driver inserts for slot bolts ...... 63432 -service accessories -screw driver inserts for cross-slotted -operating instructions screws, pointed, PR 1, PR 2 Set of stone drill bits in box * Dim. of transport case (LxWxH): and PR 3 Complying with DIN 8039, 620x410x135 mm -screw driver inserts for cross-slotted but with SDS tang. Weight: 9.5 kg screws, pointed, PZD1, PZD2 Diameters: 5, 6, 8, 10 and 12 mm ...... 63434 and PZD3 ...... 63435 Dim. of transport case (LxWxH): 420x330x100 mm Set of twist drill bits (short) * Weight: 1.8 kg (with storage batteries) Complying with DIN 338, metal, HSS...... 63433 08 Diameters from 1 mm up to 13 mm, in steps of 0.5 mm. In steel box with 25 slots...... 63436

Set of twist drill bits in wooden box * Diameters: 4, 6, 8, 10, 12 and 14 mm ...... 63437

Set of twist drill bits * Diameters: 14, 18 and 20 mm Length: 300 mm ...... 63438

Flat chisel * SDS tang. Blade width: 22 mm Length: 250 mm ...... 63439

Punch * Complying with DIN 7250, 5x150...... 63441

* = not illustrated Some articles may not be available in specific countries. Details on request. 79 Kap. 08-80 12.04.2005 15:29 Uhr Seite 76

GENERATORS DIN 14685 EISEMANN

58308 58328 58327

Generator with VARIOSPEED Generator type BSKA 6.5 V, Generator type BSKA 9 E, EISEMANN with hand starter * with electric starter * as art. No. 58308, but with Variospeed. (incl. starter battery 12 V/18 Ah), By means of the VARIOSPEED techno- ...... 58309 9 kVA, with Briggs & Stratton 4-stroke logy the rpm of the engine is reduced petrol engine type 303 447. and if more electric energy is required Generator type BSKA 8, Dim. (LxWxH): 700x440x580 mm the rpm is increased again. with hand starter * Weight: 133 kg This results in a dramatic reduction of 8 kVA, with Briggs & Stratton 4-stroke ...... 58329 fuel, exhaust gases, noise and wear: petrol engine type 303 442. 1. noise reduction of up to 7 dB Dim. (LxWxH): 820x440x580 mm Generator type BSKA 9 EV, 2. fuel reduction of up to 30% Weight: 128 kg with electric starter * 3. reduction of emission of harmful ...... 58341 (incl. starter battery 12 V/18 Ah), substances as art. No. 58329, but with Variospeed. 4. increased durability due to lower Generator type BSKA 8 V, ...... 58345 wear of the moving parts with hand starter * 5. consuming devices that normally as art. No. 58341, but with Variospeed. Generator type BSKA 12 E, are slow to start-up, starts without ...... 58326 with electric starter * problems even when the rpm (incl. starter battery 12 V/18 Ah), control is activated Generator type BSKA 8 E, 11.5 kVA, with Briggs & Stratton 4-stroke with electric starter * petrol engine type 350 447. Generator type BSKA 5, (incl. starter battery 12 V/18 Ah), Dim. (LxWxH): 820x440x580 mm 08 with hand starter * 8 kVA, with Briggs & Stratton 4-stroke Weight: 149 kg 5.5 kVA, with Briggs & Stratton 4-stroke petrol engine type 303 447...... 58333 petrol engine type 294 442. Dim. (LxWxH): 820x440x580 mm Dim. (LxWxH): 700x440x580 mm Weight: 135 kg Generator type BSKA 12 EV, Weight: 115 kg ...... 58336 with electric starter * ...... 58339 (incl. starter battery 12 V/18 Ah), Generator type BSKA 8 EV, as art. No. 58333, but with Variospeed. Generator type BSKA 5 V, with electric starter * ...... 58323 with hand starter * (incl. starter battery 12 V/18 Ah), with as art. No. 58339, but with Variospeed. Variospeed, otherwise as art. No. 58336. Generator type BSKA 13 EV ...... 58325 ...... 58324 ”HIGH PROTECTION”, with electric starter Generator type BSKA 6.5, Generator type BSKA 9, (incl. starter battery 12 V/12 Ah), with hand starter with hand starter 13 kVA, with Briggs & Stratton 4-stroke 6.5 kVA, with Briggs & Stratton 4-stroke 9 kVA, with Briggs & Stratton 4-stroke petrol engine type 380 447. petrol engine type 294 442. petrol engine type 303 442. Dim. (LxWxH): 820x440x580 mm Dim. (LxWxH): 700x440x580 mm Dim. (LxWxH): 700x440x580 mm Weight: 150 kg Weight: 118 kg Weight: 126 kg ...... 58327 ...... 58308 ...... 58328 Exhaust hose * Generator type BSKA 9 V, DIN 14572, for connection to a with hand starter * generator, Ø 50 mm, 1500 mm long. as art. No. 58328, but with Variospeed...... 83221 ...... 58334

Some articles may not be available in * = not illustrated 80 specific countries. Details on request. Kap. 08-81 12.04.2005 15:28 Uhr Seite 77

GENERATORS DIN 14685 KIRSCH

58338 58337 58318

Generator type D + E 5,5 BVF, Generator type D + E 8 BVFE, Generator type E 2.5 BSVF, with hand starter with electric starter with hand starter 5.5 kVA, with Briggs & Stratton 4-stroke (incl. starter battery 12 V/18 Ah), Similar to DIN 14685, petrol engine type 294 442. 8 kVA, with Briggs & Stratton 4-stroke 2.5 kVA, with Briggs & Stratton 4-stroke Dim. (LxWxH): 700x440x575 mm petrol engine type 303 447. petrol engine type 117 432. Weight: 116 kg Dim. (LxWxH): 820x440x575 mm Dim. (LxWxH): 610x430x480 mm ...... 58338 Weight: 138 kg Weight: 57 kg ...... 58337 ...... 58318 Generator type D + E 5.5 BVFE, with electric starter * Cover for generator 58319 (incl. starter battery 12 V/18 Ah), 5 kVA/6.5 kVA/9 kVA * 5.5 kVA, with Briggs & Stratton 4-stroke ...... 58311 petrol engine type 294 447. Dim. (LxWxH): 820x440x575 mm Cover for generator Weight: 130 kg 8 kVA/12 kVA/13 kVA * ...... 58370 ...... 58312

Generator type D + E 8 BVF, with hand starter * Further generators on request! 8 kVA, with Briggs & Stratton 4-stroke petrol engine type 303 442. Dim. (LxWxH): 820x440x575 mm 08 Weight: 128 kg ...... 58335

Generator type D + E 12 BVFES, with electric starter (incl. starter battery 12 V/20 Ah), similar to DIN 14685, 12 kVA, with Briggs & Stratton 4-stroke petrol engine type 303 447. Dim. (LxWxH): 820x440x575 mm Weight: 138 kg ...... 58319

* = not illustrated Some articles may not be available in specific countries. Details on request. 81 Kap. 08-82 12.04.2005 15:27 Uhr Seite 78

MOBILE RADIO EQUIPMENT AND ACCESSORIES

Talk-listen set HSG 41 * Leather bag * 55653 with noise compensated lip microphone with belt loop and T-strap. and large speaking key TF 4. With ...... 55645 clamping fastener for helmet comply- ing with DIN 14940 and connection Shoulder strap * plug for FUG 10/FUG 11-b ”BOSCH”. for leather bag. 55652 ...... 55562 ...... 55646

Mobile radio telephone GP 900 Single charger 230 V * (FUG 11-b) Charging time approx. 16 h, with compact unit for BOS frequencies on compartment for 1 device or 2 m band. 1 storage battery. BOS approv. No. FUG 11-b 04/96 ...... 55647 Telecom approv. No. BZL A 106 601 D EU. Single quick charger 230 V * Pre-programmed with 117 BOS Charging time approx. 1 h, with Mobile radio telephone FUG 10 R channels in multichannel mode and compartment for 1 device or Compact unit for BOS frequencies on the following channels in fewchannel 1 storage battery. 2 m band. mode: 25, 31, 34, 49, 50, 51, 53, 55, 56...... 55648 BOS approv. No. FUG 10 02/92 Incl. storage battery 1300 mAh, Telecom approv. No. antenna and belt clip. Vehicle charger bracket BZT A 103 375 C EU. Transmitting power: 1 W type WTC 604 * Programmable up to 110 channels. Dim. (LxWxH): 160x59x39 mm 12 - 31 V, for GP 900. Operational versions: W, bG, W + bG Weight: 0.6 kg ...... 188696 Transmitting power: 1 W, ...... 55644 complete with storage battery Replacement NiCd storage battery 7.5 V/500 mAh 7.5 V/1300 mAh * Dim. (LxWxH): 235x75x25 mm ...... 55649 Weight: 0.7 kg 55644 ...... 55652 Vehicle charger brachet type WTC 615 * Helical antenna 12/24 V, for GP 900 + GP 900 ”EX”...... 55653 ...... 217537

Leather bag * Microphone loudspeaker for mobile ...... 55654 radio telephone GP 900 * 55643 incl. 0.9 m spiral cable and plug as well 08 Leather strap * as 3.5 mm sleeve for earphone, with ...... 55655 rotating clip...... 55628 Quick charger LG 10-S, 230 V * with charging plug LST 9-2...... 55656 Talk-listen set HSG 41 * with noise compensated lip microphone Vehicle charger brachet and large speaking key TF 4. With type FH 10 R * clamping fastener for helmet comply- 12/24 V change-over type. ing with DIN 14940 and connection ...... 55657 plug for GP 900/FUG 11-b ”MOTOROLA”. Replacement NiCd storage battery ...... 55643 7.5 V/500 mAh * Rugged metal version...... 55658

When ordering please state the required channels.

Some articles may not be available in * = not illustrated 82 specific countries. Details on request. Kap. 08-83 12.04.2005 15:26 Uhr Seite 83

BUILT-IN RADIOS AND ACCESSORIES MOTOROLA

Radio message system - receiver HA 222 * 120437 (Radiodata) complete with spiral cable 128332 and 10-pole angular plug and seat...... 164116 108328

Vehicle wide band antenna * 158960 4 m BOS band: 74.215-77.655/ 84.015-87.455 MHz. 1010 mm long. 158962 Stainless steel. With clamping connection for cable RG 058. 108326 ...... 108309

158964 Vehicle wide band antenna * for 2 m band: 167.5-169.5/172-174 MHz MOTOROLA multichannel radio and 4 m band: Roof loudspeaker telephone equipment FUG 8 b-1 74.215-77.655/84.015-87.455 MHz. 10 W/8 Ω , red (RAL 3000). 915 mm long. Stainless steel. With 2 ...... 120437 Transceiver FUG 8 b-1 plug connections M 11x1. BOS approv. No. FUG 8 b-1 06/93, ...... 124161 Loudspeaker for crew cab Telecom approv. No. 5 W/4 Ω , with 2 m of connection BZT A 106 967 D EU, HF antenna cable RG 58/U * cable. for mobile use on 4 m band. (per meter) 50 Ω , PE-insulated, ...... 108326 163 channels on upper band, 5 mm O.D., 143 channels on lower band. 12 V. 0.9 mm I.D. Loudspeaker for pump bay ...... 158960 ...... 122434 6 W/8 Ω ...... 108328 Holder for transceiver HF antenna cable RG 213/U * with 25-pole connection terminal. (per meter) 50 Ω , PE-insulated, Amplifier 10 W * ...... 158962 10.3 mm O.D., for loudspeaker 4 ... 16 Ω , 2.25 mm I.D. 6 ... 16 V, approx. 40 ... 20000 Hz. Control unit BG 228 ”B” ...... 134029 ...... 193422 for FUG 8 b-1, standard version...... 158964 HF angular plug 50 Ω * Command amplifier 10 W + 5 W * for antenna cable RG 58/U. (Bavarian version) with built-in Control unit MBG 228 ”B” * ...... 128658 10 W NF amplifier for the command - Multifunction control unit - loudspeaker as well as built-in 5 W NF 08 for FUG 8 b-1, HF angular plug 50 Ω * amplifier for the pump bay loudspeaker. with radio message system. for antenna cable RG 213/U. Switch with 3 settings. With 12-pole ...... 158965 ...... 134675 screw sleeve for the cable for connec- tion to the terminal strip of the FUG Bracket for BG/MBG * Receiver FUNK 70 8 b-1. With 5 m of connecting cable...... 143897 Light version, with seat. For FUG 8 b-1 ”BOSCH”...... 128332 ...... 128106 Connection cable 1.5 m * 37-pole. Receiver FUNK 60 * Voltage transformer 12/24 V * ...... 108330 Heavy version, with seat. 6 A...... 124314 ...... 122417 Connection cable 5 m * 37-pole...... 128329

* = not illustrated Some articles may not be available in specific countries. Details on request. 83 Albert Ziegler GmbH & Co. KG • Manufacturers of fire service vehicles, pumps and hoses

Memminger Str. 28 • 89537 Giengen • Germany 05/05 Phone +49 7322 951-0 • Fax +49 7322 951-464 WWW: http://www.ziegler.de • E-Mail: [email protected] rsion: Ve