datasheet

FLASHLINK SDI-TD-3GMX-5 / SDI-TD-3GDX-5 3G SDI time division multiplexer/de-multiplexer

This Flashlink 3G-SDI time division Key features multiplexer offers transport of • 4 x SD-SDI + 1 x HD-SDI or 2 x HD into 3G-SDI synchronous or asynchronous SD-/HD-SDI • Transport of 8 x SD-SDI over 3G-SDI when combined signals over an 3G-SDI infrastructure. with HD-TDM

The 3G-SDI TDM signal is a fully compliant SMPTE 1080p • Fully SMPTE compliant 3G-SDI TDM link level B signal stream. The card can be configured to • On-board optical transmitter and receiver multiplex two HD-SDI signals into one 3G-SDI, or four SD- SDI and one HD-SDI signals into 3G-SDI. Transport eight SD-SDI signals over one 3G-SDI link by combining these new modules with the existing SDI-TD-MUX/SDI-TD- DMUX. On board optional optics for different transport schemes are available.

R1514 nevion.com

Equalizer Equalizer

HD-SDI/SD-SDI Reclocker Reclocker HD-SDI/SD-SDI Optical 3G-SDI Output Optical 3G-SDI Input Equalizer Equalizer Optical Transmitter Optical Receiver HD-SDI/SD-SDI Reclocker Reclocker HD-SDI/SD-SDI

Equalizer Equalizer 2x1 SD-SDI Reclocker TDM-MUX 3G-SDI3G-SDI Change- TDM-DMUX Reclocker SD-SDI InInfrfrasastructurtructuree over Equalizer Equalizer

SD-SDI Reclocker Reclocker SD-SDI Electrical 3G-SDI Output Electrical 3G-SDI Input

Equalizer Equalizer

SD-SDI Reclocker Reclocker SD-SDI

Microcontroller Remote Remote Control Microcontroller Control

SDI-TD-3GMX-5 SDI-TD-3GDX-5

Common specifications

General Power MUX +5V / 5.0W +15V / 1.5W Power DMUX +5 V / 3.9W +15 V / 1.7W Temperature range 0 to +45 °C Control Web control through Multicon GYDA SNMP control through Multicon GYDA Manual control by DIP switches and LED status monitoring

Supported standards SMPTE 125M-1995 Component video signal 4:2:2 – bit-parallel digital interface SMPTE 259M SDTV1 digital signal/data – SMPTE 274M-2008 1920 x 1080 Image sample structure, digital representation and digital timing reference sequences for multiple picture rates SMPTE 291M-2006 packet and space formatting SMPTE 292-2008 1.5Gb/s signal/data serial interface SMPTE 296M-2001 1280 × 720 Progressive image sample structure – analog and digital representation and analog interface SMPTE 297-2006 Serial digital fiber transmission system for SMPTE 259M, SMPTE 344M, SMPTE 292 and SMPTE 424M signals SMPTE 424M-2006 3Gb/s signal/data serial interface SMPTE 425-2008 3GB/s signal/data, serial interface – source image format mapping SMPTE RP165 Error detection checkwords and status flags for use in bit-serial digital interfaces for television Backpanel Latency Less than 100us (combined through MUX and DMUX), in addition comes 5us/km of fiber signal propagation time nevion.com

Specifications

SDI-TD-3GMX-5 SDI-TD-3GDX-5

Electrical video input Electrical video input Number of inputs 5 Number of inputs 1 Input signal 2 x SD/HD-SDI and 3 x SD-SDI Input signal 3G/HD-SDI with a TDM payload Connector BNC Connector BNC Impedance 75 Impedance 75 Equalization Automatic up to 100m Belden 1694A Equalization Automatic up to 70 m Belden 1694A Return loss >15dB up to 1485MHz Return loss >15dB up to 1485MHz >10dB up to 2970MHz Electrical video output Number of outputs 1 Electrical video output Number of outputs 5 Signal polarity Non-inverting Signal polarity Non-inverting Output signal 3G/HD-SDI according to SMPTE 425M Layer B, marked as 1080/30p Connector BNC Connector BNC Output signal 2 x HD/SD-SDI and 3 x SD-SDI Impedance 75 Ohm Impedance 75 Ohm Return loss >15dB up to 1485MHz Return loss >15 dB up to 1485MHz >10dB up to 2970MHz >10dB up to 2970MHz Jitter (UI = unit interval) Max. 0.2 UI Jitter (UI = unit interval) Max. 0.2 UI Signal level 0.8 V ± 10% Signal level 0.8 V ± 10%

Optical video output Optical video output Number of outputs 1 Number of inputs 1 Signal polarity Non-inverting Input signal 3G/HD-SDI with a TDM payload Output signal 3G/HD-SDI according to SMPTE 425M Layer B, Connector SC/UPC marked as 1080/30p Transmission circuit Single mode 9/125 µm Connector SC/UPC fiber Transmission circuit Single mode 9/125um Sensitivity Better than -28dB (option –R-L) fiber Better than -20dBm (option –R) Light source F-P / DFB laser Detector overload Min. -6dBm (option –R-L) threshold Min. -3dBm (option –R) Optical power -5dBM @ 1310nm (F-P laser) 0dBm CWDM (DFB laser) Detector damage > +1dBm 0/+5dBm DWDM (DFB laser) threshold Optical center 1310nm Optical wavelength 1200 – 1620nm wavelength CWDM according to ITU-T G.694.2 Connector return loss > 40dB DWDM according to ITU-T G.694.1 ch 20 – 59 Max. wavelength drift 13T: ±20nm CWDM: ±6nm DWDM: ±0.16nm Jitter (UI = unit interval) Max. 0.2 UI Connector return loss better than 40dB w/ SM fiber

Ordering options 17175 SDI-TD-3GDX-5 4 x SD-SDI + 1 x SD/HD-SDI or 2 x HD-SDI demux. 19341 SDI-TD-3GDX-5-R 4 x SD-SDI + 1 x SD/HD-SDI or 2 x HD-SDI demux. Standard PIN optical receiver. 19342 SDI-TD-3GDX-5-R-L 4 x SD-SDI + 1 x SD/HD-SDI or 2 x HD-SDI demux. Long haul optical receiver. 17172 SDI-TD-3GMX-5 4 x SD-SDI + 1 x SD/HD-SDI or 2 x HD-SDI mux. 19343 SDI-TD-3GMX-5-13T,-5.0dBm 4 x SD-SDI + 1 x SD/HD-SDI or 2 x HD-SDI mux. Short haul optical transmitter. 50122 SDI-TD-3GMX-5-C1xxx 4 x SD-SDI + 1 x SD/HD-SDI or 2 x HD-SDI mux. 0dBm CWDM optical transmitter. 50124 SDI-TD-3GMX-5-D15xx.xx, +5dBm 4 x SD-SDI + 1 x SD/HD-SDI or 2 x HD-SDI mux. +5.0dBm DWDM optical transmitter. CONTACT INFORMATION

The Americas [email protected] +1 (805) 247-8560

Asia Pacific [email protected] +65 6872 9361

Europe and Africa [email protected] +47 33 48 99 99 / +47 22 88 97 50

Middle East [email protected] +971 (0)4 3901018

UK [email protected] +44 118 9735831 nevion.com

Nevion reserves the right to make changes without notice to equipment specification or design. The information provided in this document is for guidance purposes only and shall not form part of any contract. © 2015 Nevion. All rights reserved.