Form 13276 December, 1927 Printed in U. 5. A.

LIST

FOR FAMILY SHOPS

MACHINES Nos. 101-2,101-3,101-10 and lOi-ll

A TRAOe MARK OF THE SINGER MANUFACTURING COMPANY

From the library of: Superior Sewing Machine & Supply LLC INDEX

PAGE Accessories 15 Attachments 16 Attachment Set 16 Bobbin Winder 66674 17 66691 18 Electrical Parts for 101-2 Machine 30 " " •' 101-10 Machine 32 " " " Cabinet Table Set No. 19 36 Hemmer 16 Knee Control for Cabinet Table Set No. 40 39 " " '• Portable Case Set No. 204 46 Machine No. 101-2 7 " 101-3 14 " 101-10 14 " 101-11 15 Numerical List of Parts 55 Obsolete Parts 51 pREssER Feet 17 Ruffler 1" Singer Enclosed Motor P.arts 21 " • " Motors 20 " Universal Motor Parts 26 " " Motors 26 Trimmings for Cabinet Table Set No. 19 34 " " " " " "40 38 " " Electric Combination Table Set No.304 . 48 " " Portable Case Set No. 203 42 " " " " " 204 44 Singerlights 48 SlNGERLIGHT LaMP 51

From the library of: Superior Sewing Machine & Supply LLC INSTRUCTIONS FOR ORDERING

In ordering from this list, use ONLY the part NUMBER in the FIRST column. The number stamped on a Sewing Machine part is in every case the number of the single part only. Every combination of parts sent out as such has its specific number, which, although not stamped on the parts, must be used when ordering the combination. Each number always indicates the SAME PART in whatever list it appears, or for whatever machine. The letters after some of the numbers indicate the style of finish only, as follows:

A. Hardened, Polished and Plated. B. Polished and Plated. C. Hardened only. D. Polished only. E. Soft, not Polished. F. Hardened and Polished. G. H. Blued. J. Plated only. K. Hardened and Plated. L. Brass or Gilt. M. Oxidized. P. Japanned. R. Merlized. T. Copper-plated.

These letters MUST BE USED when they appear in the list, and AFTER the number as in the list.

In this series:

1 to 1500 and 50001 to 51500 are Screw Numbers. 1501 to 1800 and 51501 to 51800 are Nut Numbers. 1801 to 2000 and 51801 to 52000 are Roller Numbers. 2001 to 50000 and 52001 and upward are numbers of Machine Parts.

The figures in the second column refer only to the plates, illustrating the parts, and are NOT TO BE USED in ordering. Parts marked with an asterisk (*) are furnished only when repairs are made at factory.

From the library of: Superior Sewing Machine & Supply LLC LIST OF PARTS COMPLETE

FOR MACHINE No. 101-2

FOR FAMILY USE. THE ARM AND BED IS ONE CASTING. THE BED IS COVERED BY A DETACHABLE CLOTH PLATE. THE BOTTOM MECH ANISM IS ENTIRELY ENCLOSED. THE HOOK TRAVELS IN A HORI ZONTAL PLANE OPERATED BY THREE SETS OF GEARS AT A RATIO OF TWO TO ONE. THE MACHINE IS DRIVEN BY AN ELECTRIC MOTOR LOCATED IN THE ARM NEAR THE BALANCE WHEEL ON THE SIDE OPPOSITE THE OPERATOR, AND THE RHEOSTAT IS IN THE BED OF THE MACHINE.

OBSOLETE

NO. I'LATE NAME •60G()1 Arm, upper and lower (solid) with 66506, 66517 and 66518 66502 8301 Arm (lower) Cover (back) 60503 8301 " (front) 66504 8302 " Plug (large) 66505 8302 " " " (small) 66506 8302 " Oil Tube 66692 9151 " Sliaft (horizontal) 66075 9152 " " " Bevel Gear (right hand spiral) with two 1259c 1259c 8302 Arm Shaft (horizontal) Bevel Gear Set

66509 8301 Arm Shaft (horizontal) Bushing (front)... 446c 8308 « Set

66510 8301 Arm Shaft (horizontal) Busliing (inter-

60554c 8308 Ann Sliaft (horizontal) Bushing (inter mediate) Sot Screw 66693 9152 Arm Shaft (horizontal) C'lamp Stop Mo tion Collar with two 79lc 791c 8302 Arm Shaft (horizontal) Clamp Stop Mo tion Collar Set Screw 66668 8324 Arm Shaft (horizontal) Flanged Bushing

66708 9152 Arm Sliaft (horizontal) Gear 66709 9152 " " " " Clutch 66711 9152 " Collar with G6714.

From the library of: Superior Sewing Machine & Supply LLC PARTS FOR MACHINE No. 101-2

NO. PLATE NAME 66717 9152 Arm Shaft (horizoutal) Gear Clutch Collar Washer 66710 9152 Arm Shaft (horizontal) Gear Clutch Spring 66712 9152 " " " " Collar with two 624c 66695 9152 Arm Shaft (liorizontal) Gear Collar Retain ing Spring 624c 9152 .4nn Shaft (horizontal) Gear Collar Set Screw 66713 9152 Arm Shaft (horizontal) Gear Spring.. 66714 9152 " " " " " Pin. 66643 8301 " (upright) 66677 9152 " " " Bevel Gear (lower) left hand spiral, with two 1259c 1259c 8302 Arnr Shaft (upright) Bevel Gear lower) Set Screw 66677 9152 Arm Shaft (upright) Bevel Gear (upper) left hand spiral, with two 1259c 1259c 8302 Arm Shaft (upright) Bevel Gear (upper) Set Screw 66514 8301 Arm Shaft (upright) Bushing (lower) 448c 8308 " " " Set Screw . ... 66515 8301 Arm Shaft (upright) Bushing (upper) 448c 8308 " Set Screw 66635 8302 Arm Shaft (upright) Hole Plug 66517 8302 Oil Tube (lower).... 66518 8302 " " (upper)... 66656 8302 " Spool Pin 8879 8302 " " " Washer (cloth) 66696 9153 Balance Wheel with two 448c 44Sc 8308 " Set Screw 1752b 8302 Clamp Stop Motion Clamping Nut 248a 8302 " Stop Screw 66520 8302 Clamp Stop Motion Clamping Nut Washer 66715 9153 Clamp Stop Motion Bushing 66716 66715 with 66695,66708 to 66713,66717 and 190540 66700 9152 Clamp Stop Motion Washer (balance wheel) thick 66701 9152 Clamp Stop Motion Washer (balance wheel) thin 66702 9152 Clamp Stop Motion Washer (shaft) thick 66703 9152 " thin 66522 8322 Cloth Plate

From the library of: Superior Sewing Machine & Supply LLC PARTS FOR MACHINE No. 101-2

NO. PLATE NAME 66523 Cloth Plate complete, Nos. 66522 and 66525 691a 8308 Cloth Plate Screw 66524 " " Slide 66525 8303 Cloth Plate Slide complete, Nos. 66524, 66526 and two 50470J 66526 8303 Cloth Plate Slide Spring 50470J 8308 " " " " Screw 66722 Face Plate 66723 9153 " " 66722 with 2827 219a 8308 " " Screw (lower) 50996b 9154 •' " " (upper) 2827 8302 •' " Thread Guard with 8505 8505 8302 " " " " Rivet...per 100 66528 8303 Feed Bar with 66532 66529 8304 " " Centre 457c 8302 " " " Set Screw 66530 8304 " " Spring 66531 8304 " " " Hook (lower) 66532 8303 " " " " (upper) 66533 8304 " Cam and Feed Lifting Eccentric with two r253c 1253c 8304 Feed Cam and Feed Lifting Eccentric Set Screw 66534 8304 Feed Dog 1094f 8308 " " Screw 66535 8304 " Lifting Rock Shaft 66536 8304 " " " " Bushing 435c 8304 " " " " " Set Screw 66537 8304 " *' " " Crank (back) with 1057e 1057e 8308 Feed Lifting Rock Shaft Crank (back) Clamping Screw 66538 8304 Feed Lifting Rock Shaft Crank (back) Connection 66539 Feed Lifting Rock Shaft Crank (front) 66540 8304 66539 with 12o9c, 50459c, 51822 and 66531 51822 8304 Feed Lifting Rock Shaft Crank (front) Roller 50459c 8304 Feed Lifting Rock Shaft Crank (front) Roller Screw Stud 1259c 8302 Feed Lifting Rock Shaft Crank (front) Set Screw

From the library of: Superior Sewing Machine & Supply LLC 10 PARTS FOR MACHIN'E No. 101-2

NO. IM.ATK NAME 66541 s:j03 Feed Regulating Shaft with two 50150c... ()054'2 8304 " " " Centre (long) 66543 8304 " (short) .... 435c 8304 " Sot Screw 6(1544 8304 " " " Connecting Link 6()54) 8304 Pin

50150c 8308 Fci'tl R'-giilatiiig Shaft Connecting Link Pin Set Screw 66546 8304 F'eoil Regulating Shaft Stud 50150c 8308 " Sot Screw... 66547 8305 Stud 6654S 8305 " Head with 56033 ISli) 8305 " Cap Screw 5(5033 8305 " Stop Pin per 100 66.549 8305 Feed Regulating Stud Lock Pin 56035 8305 " " Spring 06.550 8305 " Spring 212i) 830,5 " Screw 66551 8305 " Regulator with 200c 51823 8305 " " Roller and Stud 400:; 8305 " " Set Screw 200c 8305 Set Screw 66552 8305 Shaft 06553 8305 " " Bashing 435c 8304 Set Screw 6533 8305 " Collar with 460c... 460c 8305 " Set Screw... 06554 8303 " Rock Shaft with two 457c 66542 8304 " " Centre (left) . 448c 8308 " Set Screw 66542 8304 " (right) 435c 8304 " Set Screw 60555 8305 " " " Connection witli 457c and 460c 66556 8305 Feed Rock Shaft Connection Hinge Pin... 457c 8302 « U

From the library of: Superior Sewing Machine & Supply LLC PARTS FOR MACHINE No. 101-2 11

NO. PLATE NAME 06652 Needle Bar Connecting Link 66651 with 1130e and 66590 51002e 9154 Needle Bar Connecting Link Adjusting Screw 1130e 8306 Needle Bar Connecting Link Cap Screw... 66559 8306 " " " Stud with 1353c... 1353c 8306 " " " " Set Screw.... 66560 8306 " " Crank with 1134c and two 1036c 1134c 8306 Needle Bar Crank Position Screw 1036c 8306 " " " Set Screw 21360 8306 " " Hole Plug 66639 8306 " " Thread Guard 665b 8306 " " " " Screw 66561 8306 " " Timing Gauge 2054 8306 " Clamp with 552c 552c 8306 " " Thumb Screw 32519 8306 " Stop Pin 66718 9153 Oil Reservoir 66719 Oil Reservoir complete, Nos. 66718 and 66721 50982e 9154 Oil Reservoir Screw 66720 9154 " " " Bushing 66721 " " Wick 8366 8303 Presser Bar 32535 8305 " " Guide Bracket with 400k and 453c 400k 8305 Presser Bar Guide Bracket Adjusting Screw 453c 8305 Presser Bar Guide Bracket Set Screw.... 66564 8305 " " Lifter 85u 8305 " " " Hinge Screw 32675 9154 " " Spring 2070 8305 " " " Washer 66565 8304 " Foot Hinge Pin 66566 " " Plate 66567 " " Shank 66568 8304 Presser Foot (hinged) complete, Nos. 66565 to 66567 286d 8308 Presser Foot Thumb Screw 50023b 8308 Pressure Regulating Thumb Screw 66726 9154 Rotating Hook with 234f and 66588 66727 Rotating Hook complete, Nos. 66726, 66731 and two SOldln 66728 Rotating Hook and Bobbin Case complete, Nos. 66726, 66730, 66731 and two 50151D

From the library of: Superior Sewing Machine & Supply LLC 12 PARTS FOR MACHINE No. 101-2

NO. PLATE NAME 32522 8307 Rotating Hook Bobbin 66729 9164 " " " Case 66730 Rotating Hook Bobbin Case complete, Nos.591k, U73d,o0461c, 50462c,66574, 66o7o; 66577 and 66729 66574 8307 Rotating Hook Bo!)l3in Case Finger 50461c 8307 " " Hinge Screw 66575 8307 Rotating Hook Bobbin Case Finger Spring 50462c 8307 Screw 66576 8307 Rotating Hook Bobi)in Case Position Plate 217d 8307 Rotating Hook Bobbin Case Position Plate Screw .• 591p 8307 Rotating Hook Bol>bin Case Tension Regulating Screw 66577 8307 Rotating Hook Bobbin Case Tension Spring 1173d 8307 Rotating Hook Bobbin Case Tension Spring Screw 66578 8303 Rotating Hook Driving Shaft 66676 9154 " " •' " Bevel Gear (back) right hand .spiral,.with two 1259c 1259c 8302 Rotating Hook Driving Shaft Bevel Gear (back) Set Screw 66678 9154 Rotating Hook Driving Shaft Bevel Gear (front) left hand spiral, with two 1259c 1259c 8302 Rotating Hook Driving Shaft Bevel Gear (front) Set Screw 66579 8303 Rotating Hook Driving Shaft Bushing (back) 446c 8308 Rotating Hook Driving Shaft Bushing (back) Set Screw 66580 8303 Rotating Hook Driving Shaft Bushing (front) 435c 8304 Rotating Hook Driving Shaft Bushing (front) Set Screw 66581 8307 Rotating Hook Driving Shaft Collar with two 50150c 50150c 8308 Rotating Hook Driving Shaft Collar Set Screw 66583 8307 Rotating Hook Position Pin 50463p 8307 " " Screw 66731 9154 " " Section 50151D 8307 " " " Screw 66585 8307 " " Shaft with 66583

From the library of: Superior Sewing Machine & Supply LLC PARTS FOR MACHINE No. 101-2 13

NO. PLATE NAME 66679 9154 Rotating Hook Shaft Bevel Gear (right hand spiral) with two 1253c 1253c 8304 Rotating Hook Shaft Bevel Gear Set Screw 66586 8307 Rotating Hook Shaft Bushing 440c 8308 « " « « Set Screw 66588 8307 « « Thread Guard 234p 8307 « " « « Screw 66589 8307 Slack Thread Regulator 219j 8308 " " " Screw 66707 9154 « " " " Washer... 2102 8308 Tension Disc 1560b 8308 " Regulating Thumb Nut 32572 8308 " Releasing Disc 32573 8308 " " Lever 97e 8308 " " " Hinge Screw 12329 8308 « " " Spring 56057 8308 « " Pin 8238 8308 " Spring 50196c 8308 « Stud 440c 8308 " " Set Screw 66660 Tension complete, Nos. 1560d, 8238, 32572, 50196c, 56057, 56060, 56064, 66596 and two 2102 26075 8308 Thread Cutter and Holder 8422 8308 " Guard (head of arm) 66590 8306 " Take-up Crank 1036c 8306 " Set Screw 66591 8306 " " Lever 32543 8306 " " Hinge Stud 66592 8306 " Link 66593 8306 " " Hinge Pin 447c 8306 ii u « u u Set Screw 66594 Thread Take-up Lever complete, Nos. 32543, 66591 and 66592 66706 Thread Take-up Lever 66594 with 66593 and 66652 56060 8308 Thread Take-up Spring 66595 " « " Disc 66596 8308 " " " " 66595 with 56063 56063 8308 Thread Take-up Spring Disc Steady Pin.. 56064 8308 " " " Thread Guard 66597 8304 Throat Plate for 66534 691a 8308 " " Screw

From the library of: Superior Sewing Machine & Supply LLC 14

MACHINE No. 101-3

FOR FAMILY USE. THE ARM AND BED IS ONE CASTING. THE BED IS COVERED BY A DETACHABLE CLOTH PLATE. THE BOHOM MECH ANISM IS ENTIRELY ENCLOSED. THE HOOK TRAVELS IN A HORIZONTAL PLANE OPERATED BY THREE SETS OF GEARS AT A RATIO OF TWO TO ONE. THE MACHINE IS DRIVEN BY AN ELECTRIC MOTOR LOCATED IN THE ARM NEAR THE BAUNCE WHEEL ON THE SIDE OPPOSITE THE OPERATOR. AND THE CON TROLLER AND TERMINAL BLOCK ARE LOCATED IN THE CABINET WORK. This machine Is the same as 101-2 with the following exception:

NO. PLATE NAME *66725 Arm, upper and lower (solid) with 66506, 60517 and 66518, in place of 66661...

MACHINE No. 101-10

FOR FAMILY USE. THE ARM AND BED IS ONE CASTING. THE BED IS COVERED BY A DETACHABLE CLOTH PLATE. THE MACHINE IS FIHED WITH BUSHINGS FOR PRESSER BAR AND IMPROVED CLAMP STOP MOTION. THE HOOK TRAVELS IN A HORIZONTAL PLANE, OPERATED BY THREE SETS OF GEARS AT A RATIO OF TWO TO ONE. THE MACHINE IS DRIVEN BY AN ELECTRIC MOTOR LOCATED IN THE ARM NEAR THE BALANCE WHEEL ON THE SIDE OPPOSITE THE OPERATOR. THE RHEOSTAT IS IN THE BED OF THE MACHINE.

OBSOLETE

This machine Is the same as 101-2 with the following exceptions:

NO. PL.\TE NAME ■*66683 Arm, upper and lower (solid) with 66506, 66517, 66518 and 66689 (aluminum) in place of 66661 66684 9153 Arm Shaft (horizontal) Flanged Bushing (back) with 66685 (aluminum) in place of 66668 *66685 Arm Shaft (horizontal) Flanged Bushing (back) Sleeve 66687 Cloth Plate (aluminum) in place of 66522 66688 Cloth Plate complete, Nos. 66525 and 66687, in place of 66523 *66689 9154 Presser Bar Bushing (lower)

From the library of: Superior Sewing Machine & Supply LLC 15

MACHINE No. 101-11

FOR FAMILY USE. THE ARM AND BED IS ONE CASTING. THE BED IS COVERED BY A DETACHABLE CLOTH PUTE. THE MACHINE IS FIHED WITH BUSHINGS FOR PRESSER BAR AND IMPROVED CLAMP STOP MOTION. THE HOOK TRAVELS IN A HORIZONTAL PLANE OPERATED BY THREE SETS OF GEARS AT A RATIO OF TWO TO ONE. THE MACHINE IS DRIVEN BY AN ELECTRIC MOTOR LOCATED IN THE ARM NEAR THE BALANCE WHEEL ON THE SIDE OPPOSITE THE OPERATOR. THE CONTROLLER AND TER MINAL BLOCK ARE LOCATED IN THE CABINET WORK.

This machine is the same as 101-2 with the foilowing exceptions:

NO. PLATE NAME ♦66724 Arm, upper and lower (solid) with 66506, 66517, 66518 and 66689 (aluminum) in place of 66661 66684 9153 Arm Shaft (horizontal) Flanged Bushing (back) with 66685 (aluminum) in place of 66668 •66685 Arm Shaft (horizontal) Flanged Bushing (back) Sleeve 66687 Cloth Plate (aluminum) in place of 66522 66688 Cloth Plate complete, Nos. 66525 and 66687, in place of 66523 66689 9154 Presser Bar Bushing (lower)

ACCESSORIES

NO. PLATE NAME 36569 8311 Oiler with 36571 36570 " 36569, filled with oil 36571 8311 " Spout, 1^ in. long, with 36807 36807 8326 " " Washer (leather) 190439 8311 Tube, filled with Singer Motor Lubricant 190612 " Carton (paper) 190613 " 190439 with 190612 192144 9163 Lead Hole Plug for 101-3 Machine, for Library Cabinet Table Set No. 40 192143 9163 Lead Hole Plug Retaining Spring

From the library of: Superior Sewing Machine & Supply LLC 16

ATTACHMENT SET

NO. PLATE NAME 36594 8312 Binder 32522 8307 Bol)biDS (five) 25527b 5635 Cloth Guide 287b 5635 " " Thumb Screw 66628 8311 Feed Cover Plate 35931 8312 Hemmer (adjustabfe) Needles (six) *86291 Darning Foot •86295 " " Clamp Bodv •86296 " " " Guide S.S.470C 9155 " " " Thumb Screw 66646 8312 " " Spring 36658 9155 " Rivet per 100 86294 9155 Darning Foot (spring) complete, Nos. S. S. 476c, 36658, 66646, 86291, 86295 and 86296 25537 5635 Screw Driver (machine) 120378 9155 " " Ihook tension) 36583 5637 Tucker 120285 Attachment Set,jNos.,287b,25527a, 25537, 35931, 36583, 36594, 66628, 86294, 120378, five 32522 and six needles 120290 8313 Ruffler 120315 Attachment Set complete, Nos. 120285 and 120290

ATTACHMENTS

NO. PLATE NAME 25525 5635 Bias Gauge 120319 8312 Quilter 25539 5635 Stiletto 120348 9156 Under Braider

HEMMER

NO PLATE NAME 120318 8312 Heramer (foot) 3-^ in. hem. 120518 " " is in. hem 120566 " " A in. hem

From the library of: Superior Sewing Machine & Supply LLC 17

PRESSER FEET

NO. PLATE NAME 120363 9155 Presser Foot,for gathering 15429 9155 " " " stitching on edge and inserting cord 35205 Presser Foot for 35207 35002 9155 " Extension 35003 9155 " " Graduated Adjustable Guide (long, left) 35004 9155 Presser Foot Graduated Adjustable Guide (long, right) 35005 9155 Presser Foot Graduated Adjustable Guide (short, right) 35006 9155 Presser Foot Graduated Adjustable Guide (short, right) flush 35135 9155 Presser Foot Graduated Adjustable Guide Clamp 35206 9155 Presser Foot Graduated Adjustable Guide Clamp Lever 337d 9155 Presser Foot Graduated Adjustable Guide Clamp Screw 36696 9155 Presser Foot Graduated Adjustable Guide Clamp Steady Pin 35207 9155 Presser 5'oot with Extension and Gradu ated Adjustable Guide complete, Nos. 337d, 35002 to 35006, 35135, 35205, 35206 and 36696

RUFFLER

NO. PLATE NAME 120290 8313 Ruffler 120399 " 120290 with 120400 120400 9156 " Shirring Plate

BOBBIN WINDER FOR 101-2 AND 101-3 MACHINES

NO. PLATE NAME 66598 8314 Bobbin Position Pin per 100 66669 8324 Bracket (belt cover) 145e 8308 " Screw 66670 8326 Frame 50464b 8314 " Hinge Screw... 66601 8314 " Spring

From the library of: Superior Sewing Machine & Supply LLC 18 BOBBIN WINDER

NO. PLATE NAME 15287 8326 Friction Ring (rubber) 15288 8326 Pulley s 66671 8326 Spindle with 66598 66608 8314 Spool Pin 8879 8302 " " Washer (cloth) 66609 8314 Stop Latch 50466b 8314 " " Hinge Screw 66610 8314 " " Spring 66672 8326 Tension Bracket 66673 Tension Bracket complete, Nos. 2083, 9544,9545,10106 and 66672 207j 8314 Tension Bracket Screw 7071 8314 " " " Washer 10106 8314 " Disc 9544 8314 " " Cover 208b 8314 " " " Screw 9545 8314 " " Spring 66665 8326 Tripping Arm 190b 8314 " " Screw 66674 Bobbin Winder complete, Nos. 190b, 15287, 15288, 50464b, 50466b, 66601, 66609, 66610,66665 and 66669 to 66671

BOBBIN WINDER

FOR 101-10 AND 101-11 MACHINES

NO. PLATE NAME 66598 8314 Bobbin Position Pin per 100 66690 9153 Bracket (belt cover) aluminum 145e 8308 " Screw 66670 8326 Frame 50464b 8314 " Hinge Screw 66601 8314 " Spring 15287 8326 Friction Ring (rubber) 15288 8326 Pulley 66671 8326 Spindle with 66598 66608 8314 Spool Pin 8879 8302 " " Washer (cloth) 66609 8314 Stop Latch 50466b 8314 " " Hinge Screw 66610 8314 " Spring 66672 8326 Tension Bracket 66673 Tension Bracket complete, Nos. 208b, 9544, 9545, 10108 and 66672.

From the library of: Superior Sewing Machine & Supply LLC BOBBIN WINDER 19

NO. PLATE NAME 207j 8314 Tension Bracket Screw 7071 8314 " " " Washer.... 10106 8314 " Disc 9544 8314 " " Cover 208b 8314 " " " Screw 9545 8314 " " Spring 66665 8326 Tripping Arm 190b 8314 " " Screw 66691 Bobbin Winder complete, Nos. 190b, 15287, 15288, 50464e, 50466b, 66601, 66609, 66610, 66665, 66670, 66671 and 66690

SINGER Needles should be used in SINGER Machines. These Needles and their Containers are marked with the Company's Trade Mark "SIMANCO.**" 1

Needles in Containers marked "FOR SINGER MACHINES" are NOT SINGER made needles.

From the library of: Superior Sewing Machine & Supply LLC 20 SINGER ENCLOSED MOTORS FOR 101-2 AND 101-10 MACHINES OBSOLETE

CAT. NO. AMP. VOLTS CYCLES CURRENT

S. E. 607 .6 100-110 60 A. C. and D. C. S. E. 60S .6 115-125 60 A. C. and D. C. S. E. 610 .3 200-220 60 A. C. and D. C. S. E. 612 .3 230-250 60 A. C. and D. C.

S. E. 613 1.4 32 — D. C. S. E. 617 .6 100-110 50 A. C. and D. C. S. E. 618 .6 115-125 50 A. C. and D. C. S. E. 610 .45 150-165 50 A. C. and D. C. S. E. 620 .3 200-220 50 A. C. and D. C. S. E. 621 .3 210-230 50 A. C. and D. C. S. E. 622 .3 230-250 50 A. C. and D. C. S. E. 624 1.2 50 50 A. C. and D. C.

S. E. 625 — 130-145 50 A. C. and D. C. S. E. 627 .6 100-110 25 and 33^-3 A. C. S. E. 628 .6 115-125 25 and 33H A. C. S. E. 629 .45 150-165 25 and 33J^ A. C. S. E. 630 .3 200-220 25 and 33H A. C. S. E. 632 .3 230-250 25 and 33^ A. C. S. E. 647 .6 100-110 40 and 60 A. C. S. E. 648 .6 115-125 40 and 60 A. C. S. E. 649 .45 150-165 40 and 60 A. C. S. E. 650 .3 200-220 40 and 60 A. C. S. E. 652 .3 230-250 40 and 60 A. C. S. E. 657 .6 100-110 40 A. C. and D. C. S. E. 658 .6 115-125 40 A. C. and D. C. S. E. 659 .45 150-165 40 A. C. and D. C. S. E. 660 .3 200-220 40 A. C. and D. C. S. E. 662 .3 230-250 40 A. C. and D. C. 95-105 S. E. 665 .6 110-120 50 A. C. S. E. 677 .6 100-110 67 and 83 A. C. S. E. 678 .6 115-125 67 and 83 A. C. S. E. 679 .45 150-165 67 and 83 A. C. S. E. 680 .3 200-220 67 and 83 A. C. S. E. 682 .3 230-250 67 and 83 A. C. S. E. 687 .6 100-110 85 and 100 A. C. S. E. 688 .6 115-125 85 and 100 A. C. S. E. 689 .45 ■ 150-165 85 and 100 A. C. S. E. 690 .3 200-220 85 and 100 A. C. S. E. 692 .3 230-250 85 and 100 A.C.

From the library of: Superior Sewing Machine & Supply LLC 21

SINGER ENCLOSED MOTOR PARTS

FOR 101-2 AND 101-10 MACHINES OBSOLETE

NO. PLATE NAME 190669 8327 Armature complete for S. E.607, S. E.617, S. E.627, S. E.647, S. E. 657, S. E.677 and S. E. 687 Motors 190670 Armature complete for S.E. 608, S. E. 618, S. E. 628, S. E. 648, S. E. 658 and S. E. 665 Motors 190672 Armature complete for S.E. 610, S. E.612, S.E. 620 to S.E. 622, S. E. 630, S. E. 632, S. E.650, S. E.652, S. E.660, S. E. 662, S. E. 680 and S. E. 690 Motors 190735 Armature complete for S. E. 613 Motor.. 190954 Armature complete for S.E. 619, S. E. 629, S. E. 649 and S. E. 659 Motors 191108 Armature complete for S. E.624 Motor... 190512 " Core complete 190537 8325 " Shaft Bearing Sleeve (back) 440c 8308 " " " « « Set Screw 191370 9159 Armature Shaft Bearing Sleeve (front) — 50617b 9163 " " " " « Cap Screw 440c 8308 Armature Shaft Bearing Sleeve (front) Set Screw 190540 8325 Armature Shaft Gear with two 50150c 50150c 8308 " Set Screw 190782 8325 Brush (carbon) 190668 8325 " Holder Insulating Bushing 458c 8325 " " " " Set Screw 190083 8325 " " Spring 190079 8325 " " Tube 50596b 9163 " " " Cap Screw 190679 Brush Holder complete, Nos. 50596r, 190079,190083,190668 and 190782.... 190664 8327 Commutator 190541 8327 Cover 190539 8325 " Pin *190501 8327 Field Coil Gower) for 192696 ♦190500 8327 " " (upper) for 192696 192696 Field Coil complete for S. E. 607 Motor, Nos. 190500 and 190501 ♦190503 Field Coil (lower) for 192697

From the library of: Superior Sewing Machine & Supply LLC 22 SINGER ENCLOSED MOTOR PARTS

NO, PLATE NAME •190502 Field Coil (upper) for 192697 192697 Field Coil complete for S. E. 608 Motor, Nos. 190502 and 190503 *190507 Field Coil (lower) for 192698 *190500 " " (upper) for 192698 192698 Field Coil complete for S. E. 610 Motor, Nos. 190506 and 190507 *190511 Field Coil (lower) for 192699 *190510 " " (upper) for 192699 192699 Field Coil complete for S. E. 612 Motor, Nos. 190510 and 190511 *190737 Field Coil (lower) for 192700 *190736 " " (upper) for 192700 192700 Field Coil complete for S. E. 613 Motor, Nos. 190736 and 190737 •19080S Field Coil (lower) for 192701 *190500 S327 " (upper) for 192701 192701 Field Coil complete for S. E. 617 Motor, Nos. 190500 and 190808 *190810 Field Coil (lower) for 192702 *190502 " " (upper) for 192702 192702 Field Coil complete for S. E. 618 Motor, Nos. 190502 and 190810 *190956 Field Coil (lower) for 192703 *190955 " " (upper) for 192703 192703 Field Coil complete for S. E. 619 Motor, Nos. 190955 and 190956 *190809 Field Coil (lower) for 192704 *19050!) " (upper) for 192704 192704 Field Coil complete for S. E. 620 and S. E. 621 Motors, Nos. 190506 and 190809 *190801 Field Coil (lower) for 192705 *190510 " (upper) for 192705 192705 Field Coil complete for S. E. 622 Motor, No.s. 190510 and 190801 *191110 Field Coil (lower) for 192717 *191109 " " (upper) for 192717 192717 Field Coil complete for S. E. 624 Motor, Nos. 191109 and 191110 Field Coil (lower) for S. E. 625 Motor... " " (upper) for S. E. 625 Motor... *191120 " " (lower) for 192706 *190500 8327 " " (upper) for 192706 192706 Field Coil complete for S. E. 627 Motor, Nos. 190500 and 191120 *191394 Field Coil (lower) for 192707

From the library of: Superior Sewing Machine & Supply LLC SINGER ENCLOSED MOTOR PARTS 23

NO. PLATE NAME *190502 Field Coil (upper) for 192707 192707 Field Coil complete for S. E. 628 Motor, Nos. 190502 and 191394 *191870 Field Coil (lower) for 192708 *190955 " " (upper) for 192708 192708 Field Coil complete for S. E. 629 Motor, Nos. 190955 and 191870 *191837 Field Coil (lower) for 192709 *190508 " " (upper) for 192709 192709 Field Coil complete for S. E. 630 Motor, Nos. 190506 and 191837 ♦191128 Field Coil (lower) for 192710... *190510 " " (upper) for 192710 192710 Field Coil complete for S. E. 632 Motor, Nos. 190510 and 191128 *191001 Field Coil (lower) for 192711 *191000 " " (upper) for 192711 192711 Field Coil complete for S. E. 647 Motor, Nos. 191000 and 191001 *190953 Field Coil (lower) for 192712 *190952 " " (upper) for 192712 192712 Field Coil complete for S. E. 648 Motor, Nos. 190952 and 190953 *191119 Field Coil (lower) for 192713 *191118 " " (upper) for 192713 192713 Field Coil complete for S. E. 649 Motor, Nos. 191118 and 191119 *191218 Field Coil (lower) for 192714 *191217 " " (upper) for 192714 192714 Field Coil complete for S. E. 650 Motor, Nos. 191217 and 191218 *191871 Field Coil (lower) for 192715 *190510 " " (upper) for 192715 192715 Field Coil complete for S. E. 652 Motor, Nos. 190510 and 191871 *191159 Field Coil (lower) for 192716 *190500 " " (upper) for 192716 192716 Field Coil complete for S. E. 657 Motor, Nos. 190500 and 191159 *191318 Field Coil (lower) for 192724 *190502 " " (upper) for 192724 192724 Field Coil complete for S. E. 658 Motor, Nos. 190502 and 191318 *191371 Field Coil (lower) for 192725 *190955 " " (upper) for 192725 192725 Field Coil complete for S. E. 659 Motor, Nos. 190955 and 191371

From the library of: Superior Sewing Machine & Supply LLC 24 SINGER ENCLOSED MOTOR PARTS

NO. PLATE .NAME *191235 Field Coil (lower) for 192722 •190506 " " (upper) for 192722 192722 Field Coil complete for S. E. 660 Motor, Nos. 190506 and 191235 ♦191291 Field Coil (lower) for 192723 ♦190510 " " (upper) for 192723 192723 Field Coil complete for S. E. 662 Motor, Nos. 190510 and 191291 ♦192067 Field Coil (lower) for 192726 ♦192066 " " (upper) for 192726 192726 Field Coil complete for S. E. 665 Motor, Nos. 1920(50 and 192067 ♦191181 Field Coil (lower) for 192721 ♦191061 " •' (upper) for 192721 192721 Field Coil complete for S. E. 677 Motor, Nos. 191061 and 191181 Field Coil (lower) for S. E. 678 Motor... — " " (up|>cr) for S. E. 678 Motor... " " (lower) for S. E. 679 Motor... " " (upper) for S. E. 679 Motor... ♦191099 " •' (lower) for 192718 ♦190955 " " (upper) for 192718 192718 Field Coil complete for S. E. 680 Motor, Nos. 190955 and 191099 Field Coil (lower) for S. E. 682 Motor... " " (upper) for S. E. 682 Motor... *191062 " " (lower) for 192719 *191061 " " (upper) for 192719 192719 . Field Coil complete for S. E. 687 Motor, Nos. 191061 and 191062 Field Coil (lower) for S. E. 688 Motor... " " (upper) for S. E. 688 Motor... " " (lower) for S. E. 689 Motor... " " (upper) for S. E. 689 Motor... *191064 " " (lower) for 192720 •191063 " " (upper) for 192720 192720 Field Coil complete for S. E. 690 Motor, Nos. 191063 and 191064 Field Coil (lower) for S. E. 692 Motor... " " (upper) for S. E. 692 Motor... The part numbers for the field coils (upper and lower) that are printed with an asterisk (*) will be furnished only when repairs to a motor are made at the factory. No orders will be filled for upper or'Iower coils separately. Agency orders will only be filled with field coils complete, comprising one upper and one lower coil.

From the library of: Superior Sewing Machine & Supply LLC SINGER ENCLOSED MOTOR PARTS 25

NO. PLATE NAME "lOlOtiO Fiold Coil Lead Terminal Clip Body *191961 " " " " " " Cap. 190614 8325 '* " Retainer 190479 8327 " Core 50469e 8326 *' " Screw 190663 8327 Frame 190680 Frame eomplete. Nos. 457c, 190537, 190663, 191370 and two each 440c, 458c, 190538 and 190539 190538 8325 Frame Grease Well Plug 647d 8326 " Screw 190530 8325 Grea.so Cup Body 190531 8325 " " Wick 190533 8325 " ' 190531 with 190532.... 190532 8325 " Spring 190520 Grease Cup complete, Nos. 190530 and 190533 190904 S323 Lead Wire, 19 in. long, from motor to terminal block 190962 8323 Lead Wire, 2l}4 in* long, from motor to terminal block 190544 8327 Lead Wire Tube (circular loom) 190543 8327 " " " 190544 with 190545 and 190720 190720 8327 Lead Wire Tube Ferrule (lower) 190545 8327 " " " " (upper) 457c 8302 " " " " Set Screw 190660 8325 Terminal complete 50520 8329 " Jumper Plate Screw (brass)

From the library of: Superior Sewing Machine & Supply LLC 26

SINGER UNIVERSAL MOTORS FOR 101-3 AND 101-11 MACHINES

CAT. NO. AMP. VOLTS CYCLES CURRENT

S. U. 603a 1.4 32 D. C. S. U. 603b 1.4 32 D. C. S. U. 605a 1.1 50 25 to 75 A. C. and D. C. S. U. 605b 1.1 50 25 to 75 A. C. and D. C. S. II. 608a .6 95-100 25 to 75 A. C. and D. C. S. U. 606b .6 95-100 25 to 75 A. C. and D. C. S. U. 607a .6 100-110 25 to 75 A. C. and D. C. S. U. 607b .6 100-110 25 to 75 A. C. and D. C. S. U. 608a .5 115-125 25 to 75 A. C. and D. C. S. U. 608u .5 115-125 25 to 75 A. C. and D. C. S. U. 609a .4 150-165 25 to 75 A. C. and D. C. S. U. 609b .4 150-165 25 to 75 A. C. and D. C. S. U. 010a .3 200-220 25 to 75 A. C. and D. C. S. U. 610b .3 200-220 25 to 75 A. C. and D. C. S. U. 611a .3 210-230 25 to 75 A. C. and D. C. S. U. 611b .3 210-230 25 to 75 A. C. and D. C. S. U. 612a .3 230-250 25 to 75 A. C. and D. C. S. U. 612b .3 230-250 25 to 75 A. C. and D. C. S. U. 615a .5 130-145 25 to 75 A. C. and D. C. S. U. 615b .5 130-145 25 to 75 A. C. and D. C. S. U. 687a .7 100-110 80 to 100 A. C. S. U. 687b .7 100-110 80 to 100 A. C. S. U. 690a .4 200-220 80 to 100 A. C. S. U. 690b .4 200-220 80 to 100 A. C. S. U. 692a .3 230-250 80 to 100 A. C. S. U. 692b .3 230-250 80 to 100 A. C.

SINGER UNIVERSAL MOTOR PARTS FOR 101-3 AND 101-11 MACHINES

NO. PLATE NAME 190735 Armature complete for S. U.603 Motor... 192471 9160 " " " S. U.605 Motor... 192472 « " " S.U. 606andS.U. 607 Motors 192473 Armature complete for S. U.608 Motor... 192474 « " " S.U.609Motor... 192475 " " " S.U.610Motor... 192476 " S. U. 611 and S. U. 612 Motors...

From the library of: Superior Sewing Machine & Supply LLC SINGER UNIVERSAL MOTOR PARTS 27

NO. PLATE NAME 192477 Armature complete for S. U.615 Motor.,. 192478 Armature complete for S. U.687 Motor... 192479 Armature complete for S. U.690 Motor... 192480 Armature complete for S. U.692 Motor... 190512 Armature Core complete 190537 8325 " Shaft Bearing Sleeve (back).... 440c 8308 " " " " " Set Screw 191370 9159 Armature Shaft Bearing Sleeve (front) 50617b 9163 " " " " « Cap Screw 440c 8308 Armature Shaft Bearing Sleeve (front) Set Screw 190540 8325 Armature Shaft Gear with two 50150c 50150c 8308 " " " Set Screw 192457 9159 Brush (carbon) 191512 9159 " Holder Cap 192460 9159 " " Insulating Bushing 458c 8325 " " " " Set Screw 192458 9159 " " Spring 192459 9159 " " Tube 190664 8327 Commutator 190541 8327 Cove 190539 8325 " Pin ♦192482 Field Coil (lower) for 192651 ♦192481 " " (upper) for 192651 192651 Field Coil complete for S. U.603a Motor, Nos. 192481 and 192482 *192484 Field Coil (lower) for 192652 *192483 " " (upper) for 192652 192652 Field Coil complete for S. U. 605a Motor, Nos. 192483 and 192484 *192486 Field Coil (lower) for 192653 *192485 " " (upper) for 192653 192653 Field Coil complete for S. U. 606a Motor, Nos. 192485 and 192486 *192488 Field Coil (lower) for 192654 *192487 " " (upper) for 192654 192654 Field Coil complete for S. U. 607a Motor, Nos. 192487 and 192488 *192490 Field Coil (lower) for 192655 *192489 " " (upper) for 192655 192655 Field Coil complete for S. U. 608a Motor, Nos. 192489 and 192490 *192492 Field Coil (lower) for 192656 *192491 " " (upper) for 192656

From the library of: Superior Sewing Machine & Supply LLC 28 SINGER UNIVERSAL MOTOR PARTS

No. PLATE NAME 192656 Field Coil complete for S. U. 609a Motor, Nos. 192491 and 192492 ♦192494 Field Coil (lower) for 192657 ♦192493 " " (upper) for 192657. 192657 Field Coil complete for S. U. 610a and S. U. 611a Motors, Nos. 192493 and 192494 ♦192496 Field Coil (lower) for 192658 ♦192495 " " (upper) for 192658 192658 Field Coil complete for S» U. 612a Motor, Nos. 192495 and 192496 ♦192498 Field Coil (lower) for 192659 ♦192497 " " (upper) for 192659 192659 Field Coil complete for S. U. 615a Motor, Nos. 192497 and 192498 ♦192500 Field Coil (lower) for 192660 ♦192499 " " (upper) for 192660 192660 Field Coil complete for S. L'. 687a Motor, Nos. 192499 and 192500 ♦192502 Field Coil (lower) for 192661 ♦192501 " " (upper) for 192661 192661 Field Coil complete for S. U. 690a Motor, Nos. 192501 and 192502 •192504 Field Coil (lower) for 192662 ♦192503 " " (upper) for 192662 192662 Field Coil complete for S. U. 692a Motor, Nos. 192503 and 192504 ♦192506 Field Coil (lower) for 192671 ♦192505 " " (upper) for 192671 192671 Field Coil complete for S. U. 603b Motor, Nos. 192505 and 192506 ♦192508 Field Coil (lower) for 192672 ♦192507 " " (upper) for 192672 192672 Field Coil complete for S. U. 605b Motor, Nos. 192507 and 192508 ♦192510 Field Coil (lower) for 192673 ♦192509 " " (upper) for 192673 192673 Field Coil complete for S. U. 606b Motor, Nos. 192509 and 192510 ♦192512 Field Coil (lower) for 192674 ♦192511 " " (upper) for 192674 192674 Field Coil complete for S. U. 607b Motor, Nos. 192511 and 192512 ♦192514 Field Coil (lower) for 192675 ♦192513 " " (upper) for 192675 192675 Field Coil complete for 8. U. 608b Motor, Nos. 192513 and 192514

From the library of: Superior Sewing Machine & Supply LLC SINGER UNIVERSAL MOTOR PARTS 29

NO. PLATE NAME *192516 Field Coil (lower) for 192676 *192515 " " (upper) for 192676 192676 Field Coil complete for S. L'. 609b Motor, Nos. 192515 and 192516 *192518 Field Coil (lower) for 192677 *192517 " " (upper) for 192677 192677 Field Coil complete for S. U. 610b and S. U. 611b Motors, Nos. 192517 and 192518 *192520 Field Coil (lower) for 192678 *192519 " " (upper) for 192678 192678 Field Coil complete for S. U. 612b Motor, Nos. 192519 and 192520 *192522 Field Coil (lower) for 192679 *192521 " « (upper) for 192679 192679 Field Coil complete for S. U. 615b Motor, Nos. 192521 and 192522 *192524 Field Coil (lower) for 192680 *192523 " " (upper) for 192680 192680 Field Coil complete for S. U. 687b Motor, Nos..192523 and 192524 *192526 Field Coil (lower) for 192681 *192525 " " (upper) for 192681 192681 Field Coil complete for S. U. 690b Motor, Nos. 192525 and 192526 *192528 Field Coil (lower) for 192682 *192527 " " (upper) for 192682 192682 Field Coil complete for S. U. 692b Motor, Nos. 192527 and 192528 The part numbers for the field coils (upper and lower) that are printed with an asterisk (*) will be furnished only when repairs to motor are made at the factory. No orders will be filled for upper or lower coils separately. Agency orders will only be filled with field coUs complete, comprising one upper and one lower coil. *191960 Field Coil Lead Terminal Clip Body *191961 " " " " " " Cap. 192424 9159 " " Retainer 192467 9160 " Core 51032b 9163 " " Screw 192456 9151 Frame 192455 Frame complete, Nos. 457c, 190537, 191370, 192456 and two each 440c, 458c, 190538 and 190539

From the library of: Superior Sewing Machine & Supply LLC 30 SINGER UNIVERSAL MOTOR PARTS

NO. PLATE NAME 190538 8325 Frame Grease Well Plug 647d 8326 " Screw 190530 8325 Grease Cup Body 190531 8325 " " Wick 190533 8325 " " " 190531 with 190532.... 190532 8325 " " " Spring 190529 Grease Cup complete, Nos. 190530 and 190533 190904 8323 Lead Wire, 19 in. long, from motor to terminal block 190962 8323 Lead Wire, 21^ in. long, from motor to terminal block 192081 9160 Lead Wire Tube (circular loom) 192080 9160 Lead Wire Tube complete, Nos. 190545, 190720 and 192081 190720 8327 Lead Wire Tube Ferrule (lower) 190545 8327 " " " " (upper) 457c 8302 " " " " " Set Screw 899310 Name Plate for S. U. 607a Motor 899311 " " " S. U. 607b Motor 899312 " " " all S. U. Motors except S. U. 607a and S. U 607b

ELECTRICAL PARTS FOR 101-2 MACHINE OBSOLETE

NO. PLATE NAME 190869 8324 Controller Box Side Cover 1231J 8326 " " " " Screw 191771 " Resistance Unit for 191111 190295 190878.... 191769 190879.... 191768 190880.... 191767 190881.... 191770 190882.... 190677 190883.... 190878 8324 Controller Resistance Unit complete,for 100 to 110 volts, A. C. or D. C. Motor, Nos. 190295, 190884 and 191144 190879 Controller Resistance Unit complete,for 115 to 125 volts, A. C. or D. C. Motor, Nos. 190884, 191144 and 191769 190880 Controller Resistance Unit complete,for 150 to 165 volts, A. C. or D. C. Motor, Nos. 190884, 191144 and 191768

From the library of: Superior Sewing Machine & Supply LLC ELECTRICAL PARTS 31

NO. PL.\TE NAME 190881 Controller Resistance Unit complete,for 200 to 220 volts, A. C. or D. C. Motor, Nos. 190884, 191144 and 191767 190882 Controller Resistance Unit complete,for 230 to 250 volts, A. C. or D. C. Motor, Nos. 190884, 191144 and 191770 191111 Controller Resistance Unit complete,for 50 volts, A. C. or D. C. Motor, Nos. 190884, 191144 and 191771 190883 Controller Resistance Unit complete,for 32 volts, D. C. Motor, Nos. 190677, 190884 and 191144 190884 8324 Controller Resistance Unit Contact Lever complete 190870 8325 Controller Resistance Unit Contact Lever Driver with 190874 190871 8324 Controller Resistance Unit Contact Lever Driver Connecting Rod 184j 8325 Controller Resistance Unit Contact Lever Driver Connecting Rod Screw 191116 8325 Controller Resistance Unit Contact Lever Driver Spring 191117 8325 Controller Resistance Unit Contact Lever Driver Spring Sleeve 190872 8325 Controller Resistance Unit Contact Lever Driver Spring Stud 190873 8325 Controller Resistance Unit Contact Lever Driver Spring Stud Bracket with 190872 1477j 8325 Controller Resistance Unit Contact Lever Driver Spring Stud Bracket Screw 190874 8325 Controller Resistance Unit Contact Lever Driver Stud 190608 8329 ControllerResistanceUnitCushion Washer (leather) 191144 Controller Resistance Unit Name Plate... 50609E 9163 " " " Screw 191410 9159 " " « « Washer (fibre) 190902 8324 Lead (long) 190903 8324 " (short) 190963 Leads complete, from resistance unit to terminal block, Nos. 67116, 190902 and 190903 67116 8329 Lead Bushing (rubber) 190750 8324 Terminal Block (lower half) 191002 " " " " 190750 with 190844, two 190840 and three 50568..

From the library of: Superior Sewing Machine & Supply LLC 32 ELECTRICAL PARTS

NO. PLATE NAME 50570J 8326 Terminal Block (lower half) Screw 190751 8324 " " (upper half)

190867 • Terminal Block complete, Xos. 190751, 191002 and six each 5052() and 190553 190844 8329 Terminal Block Connecting Plate (brass) 50568 8325 " " Screw 190899 8324 Insulator (black fibre)... 190840 8329 Pin (male) brass 50520 8329 Wire Clamp Screw (brass) 190553 8329 " " " Washer 5057iJ 8326 Screw

ELECTRICAL PARTS

FOR 101-10 MACHINE OBSOLETE

NO. PLATE NAME 190869 8324 Controller Box Side Cover 1231.1 8326 " " " " Screw 191771 " Resistance Unit for 191111 — 190295 " " " " 190878.... 191769 « " " " 190879.... 191768 " " " " 190880.... 191767 '• « " " 190881.... 191770 « " " " 190882.... 190677 " " " " 190883.... 190878 8324 Controller Re.sistance Unit complete, for 100 to 110 volts, A. C. or D. C. Motor, Nos. 190295, 190884 and 191144 190879 Controller Resistance Unit complete,for 115 to 125 volts, A. C. or D. C. Motor, Nos. 190884, 191144 and 191769 190880 Controller Resistance Unit complete,for 150 to 165 volts, A. C. or D. C. Motor, Nos. 190884, 191144 and 191768 190881 Controller Resistance Unit complete,for 200 to 220 volts, A. C. or D. C. Motor, Nos. 190884, 191144 and 191767 190882 Controller Resbtance Unit complete,for 230 to 250 volts, A. C. or D. C. Motor, Nos. 190884, 191144 and 191770 191111 Controller Resistance Unit complete,for 50 volts, A. C. or D. G. Motor, Nos. 190884, 191144 and 191771

From the library of: Superior Sewing Machine & Supply LLC ELECTRICAL PARTS 33

NO. PL.\TE NAME 190883 Controller Resistance Unit complete,for 32 volts, D. C. Motor, Nos. 190677, 190884 and 191144 190884 8324 Controller Resistance Unit Contact Lever complete 190870 8325 Controller Resistance Unit Contact Lever Driver with 190874 190871 8324 Controller Resistance Unit Contact Lever Driver Connecting Rod 184j 8325 Controller Resistance Unit Contact Lever Driver Connecting Rod Screw 191116 8325 Controller Resistance Unit Contact Lever Driver Spring 191117 8325 Controller Resistance Unit Contact Lever Driver Spring Sleeve 190872 8325 Controller Resistance Unit Contact Lever Driver Spring Stud 190873 8325 Controller Resistance Unit Contact Lever Driver Spring Stud Bracket with 190872 1477j 8325 Controller Resistance Unit Contact Lever Driver Spring Stud Bracket Screw 190874 8325 Controller Resistance Unit Contact Lever Driver Stud 190608 8329 ControllerResistanceUnitCushionWasher (leather) 191144 Controller Resistance Unit Name Plate... 50609b 9163 " " " Screw 191410 9159 " " " " Washer (fibre) 190902 8324 Lead (long) 190903 8324 " (short) 190963 Leads complete, from resistance unit to terminal block, Nos. 67116, 190902 and 190903 67116 8329 Lead Bushing (rubber) 190750 8324 Terminal Block (lower half) 191178 " " " " 190750 with 190844, two 190845 and three 50568... 50570J 8326 Terminal Block (lower half) Screw 191177 9160 " " (upper half) 191176 Terminal Block complete, Nos. 191177, 191178 and six each 50520 and 190553.. 190844 8329 Terminal Block Connecting Plate (brass) 50568 8325 " " " " Screw 190899 8324 " " Insulator (black fibre)... 190846 9159 " " Angle Pin (male) brass..

From the library of: Superior Sewing Machine & Supply LLC 34 ELECTRICAL PARTS

NO. PLATE NAME 190845 9159 Terminal Block Angle Pin (male) 190846 with 190847 , 190847 9159 Terminal Block Angle Pin (male) Seat (brass) 50520 8329 Terminal Block Wire Clamp Screw (brass) 190553 8329 " " " " " Washer 5057IJ 8326 " " Screw

TRIMMINGS FOR LIBRARY CABINET TABLE SET No. 19

FOR 101-2 MACHINE

OBSOLETE

NO. FLATE NAME 1243.53 9157 Bottom Rail Support Bracket with two cache's in- No. 7 and % in. No. 7 blued wood screws 56260 8322 Counterbalance Spring 56261 8322 " " Adjusting Collar 50251E 8326 " " " " Bolt with 1734e 1734e 8326 Counterbalance Spring Adjusting Collar Bolt Nut 9281 8328 Counterbalance Spring Adjusting Collar Bolt Nut Washer 56262 8322 Counterbalance Spring Bracket (hinge).. 56441 8328 Drawer Lock with two wood screws in. No. 2 28076 8328 Drawer Lock Escutcheon Note: When ordering No. 28076, state finish 28233 8328 Drawer Lock Key 56496 8328 " Spring Catch 56497 8328 " " " Cap 124492 9157 Leg Socket 5604 8328 " " Pin per 100 25152 8316 Machine Cushion (felt) 124493 9158 " Hinge Connection 2809 8328 " " " Hinge Pin... 51045c 9158 " " " Set Screw.... 15263 8328 " " Plate 124494 Machine Hinge complete, Nos. 2809, 15263, 124493 and wood screw H in. No. 10 Note: When ordering No. 124494, state finish

From the library of: Superior Sewing Machine & Supply LLC TRIMMINGS FOR CABINET TABLE SET No. 19 35

NO. PLATE NAME 124344 9151 Machine Lifting Plate 124345 9158 " " " Plunger 124346 9158 " " " " Spring.... 9320 9158 " " " • " " Stop Pin per 100 124347 9158 Machine Lifting Plate Plunger Spring Stop Pin Cap 124348 Machine Lifting Plate 124344 with 9320 and 124345 to 124347 124349 Machine Lifting Plate 124348 with 28123 and 56262 28123 8328 Machine Lifting Plate Hinge Pin 124350 Machine Lifting Plate complete, No.s. 9281, 50251E, 56260, 56261 and 124349 56352 8316 Machine Platform Flap Hinge (movable) 56353 8316 " " " " " Hinge Pin 56353 8316 Machine Platform Flap Hinge (movable) Stop Pin 56354 8316 Machine Platform Flap Hinge (stationary) 56355 Machine Platform Flap Hinge complete, Nos. 56352, 56354 and two 56353 56356 8316 Machine Platform Flap Rest 56357 8316 " " " "Cushion (cloth) 56358 8311 OU Can Holder 28076 8328 " " Door Escutcheon Note: When ordering No. 28076, state finish

28183 8316 Oil Can Door Hinge 56496 8328 " " " Spring Catch 56497 8328 " " " " " Cup 124412 Shield Chain, 5H in. long 124351 " " 124412 with 124352 and wood screw in. No. 5 R. H. B 124352 Shield Chain Hook 28291 8328 " Hinge 56469 8316 " Stop with wood screw in. No. 7 R. H. B 124343 9157 Stretcher Board .4.ngle Plate with five blued wood screws ^ in. No. 7 124484 Table Leaf (left) Hinge Note: When ordering No. 124484, state.finish

*124338 Table Leaf (left) Rest Rod 124339 8322 Table Leaf (left) Rest Rod complete, Nos. 50444e, 124338, 124340 and 124341....

From the library of: Superior Sewing Machine & Supply LLC 36 TRIMMINGS FOR CABINET TABLE SET No. 19

NO. PLATE NAME 124340 8328 Table Leaf (left) Rest Rod Cushion (felt) 124341 " " " " " " Holder 50444e 8328 " " " " " Stop Screw... 56372 8322 " " " " " Tube 56373 8316 " " (right) Hinge (movable) ; 56374 8316 " " " " (stationary) u .. « « Link 56375 8316 56376 8316 U «( u u u Hinge Pin 56376 8316 Table Leaf (right) Hinge (stationary) Link Stop Pin 56377 Table Leaf (right) Hinge complete, Nos. 56373 to 56375 and three 56376 28253 8316 Tilting Centre Drawer Hinge

Note: When ordering No. 28253, state finish

56496 8328 Tilting Centre Drawer Spring Catch , ,, 56497 8328 " " " " " Cup 124319 8316 " Stop

ELECTRICAL PARTS FOR LIBRARY CABINET TABLE SET No. 19

OBSOLETE

NO. PLATE NAME *190615 8329 Connecting Plug Insert (moulded) for 190838 *190616 8329 Connecting Plug Insert (moulded) for 190658 *50520 8329 Connecting Plug Insert Screw (brass) *190553 8329 " " " " Washer.... *190552 8329 " " Ferrule for 190658 *190839 8329 " " " " 190838 *190484 8329 " " Insulation Washer 190658 8323 " " (male half) Nos. 50520, 190484, 190552, 190553 and 190616.... 190838 8323 Connecting Plug (female half) Nos. 50520, 190484, 190553, 190615 and 190839.... 190825 8329 Connecting Plug Holder (upper) 190826 8329 " " " (lower) 191121 8322 Controller Rock Shaft 191122 Controller Rock Shaft complete, Nos. 50583c, 191121 and 191123 190399 8329 Controller Rock Shaft Centre (back)

From the library of: Superior Sewing Machine & Supply LLC ELECTRICAL PARTS FOR CABINET SET No. 19 37

NO. PLATE NAME 190829 8324 Controller Rock Shaft Centre (back) Bracket with 190399 and three wood screws H in. No. 7 190607 8329 Controller Rock Shaft Centre (front) 190830 8324 « " « " "Bracket with 1497r and three wood screws ^ in. No. 7 1497r 9163 Controller Rock Shaft Centre (front) Set Screw 191123 8322 Controller Rock Shaft Knee Plate 505830 8326 K It tt tt tt Hinge Screw 191096 8329 Controller Rock Shaft Spring 190832 8329 « " « « Stud 190833 8329 " " " " " Plate 190834 U U i( U u 190S33 with 190832 190836 8323 Lead complete,from machine to table, Nos. 190070, 190837 and two each 190658 and 190838 190070 8323 Lead Bushing (rubber) 190837 « Cable for 190836 190835 8329 Clamping Plate 190900 8323 Lead complete,from stand to lamp socket, Nos. 190851, 190901 and 192540 190901 Lead Wire, 8 ft. 4 in. long 192540 9161 Lead Plug complete, for lamp socket, Nos. 192541 to 192543 192541 Lead Plug Base 192542 9161 " " Cap 192543 9159 " " Flash Disc (fibre) 190852 " for 190851 190851 8323 Lead Plug complete (2 pin female) two each Nos.50520,190553,190841,190852 and three each 1768 and 50567 50567 8329 Lead Plug Screw 1768 8329 " Nut 190842 8329 " Insert (brass) 190841 " " " 190842 with 190843 190843 8329 " " Stop Pin 50520 8329 " " Screw (brass) 190553 8329 " " " Washer

From the library of: Superior Sewing Machine & Supply LLC 38

TRIMMINGS FOR LIBRARY CABINET TABLE SET No. 40

FOB 101-3 MACHINE

NO. PliATE NAME 124434 9157 Corner Brace 56260 8322 Counterbalance Spring. 56261 8322 " " Adjusting Collar 50251E 8326 Bolt with 1734e 1734e 8326 Counterbalance Spring Adjusting Collar Bolt Nut 9281 8328 Counterbalance Spring Adjusting Collar Bolt Nut Washer 124449 9151 Counterbalance Spring Bracket 124492 9157 Leg Socket 5604 8328 " " Pin per 100 25152 8316 Machine Cushion (felt) 124493 9158 " Hinge Connection 2809 8328 " " " Hinge Pin... 51045c 9158 " " " Set Screw.... 15263 8328 " " Plate 124494 Machine Hinge complete, Nos.2809,15263, 124493 and wood screw in. No. 10.. Note: When ordering No. 124493, state finish 124450 9151 Machine Lifting Plate 124451 " " " 124450 with 28123 and 124449 28123 8328 Machine Lifting Plate Hinge Pin 124452 Machine Lifting Plate complete, Nos. 9281, 50251E, 56260, 56261 and 124451 56352 8316 Machine Platform Flap Hinge (movable) 56353 8316 " " " " " Hinge Pin 56353 8316 Machine Platform Flap Hinge (movable) Stop Pin 56354 8316 Machine Platform Flap Hinge (stationary) 56355 Machine Platform Flap Hinge complete, Nos. 56352, 56354 and two 56353 56356 8316 Machine Platform Flap Rest 56357 8316 " " " "Cushion (cloth) 124453 9157 Oil Can Retaining Plate 124412 Shield Chain, 5^ in. long

From the library of: Superior Sewing Machine & Supply LLC TRIMMINGS FOR CABINET TABLE SET No. 40 39

NO. PLATE NAME 124351 Shield Chain 124412 with 124352 and wood .screw y% in. No. 5 R. H. B 124352 Shield Chain Hook 28291 8328 " Hinge 124456 9157 " Stop 124484 Table Leaf (left) Hinge

Note: When ordering No. 1244S4, state finish

♦124338 Table Leaf (left) Rest Rod 124339 8322 Table Leaf (left) Rest Rod complete, Nos. 50444E, 124338, 124340 and 124341.... 124340 8328 Table Leaf (left) Re.st Rod Cushion (felt).. ♦124341 (( K " " u u Holder 50444R 8328 " " " " " Stop Screw.... 56372 8322 " " " " " Tube 56373 8316 " " (right "> Hinge (movable) 56374 8316 " " " " (stationary) 56375 8316 « " " " " Link « i< « « « « 56376 8316 Hinge Pin 56376 8316 Table Leaf (right) Hinge (stationary) Link Stop Pin 56377 Table Leaf (right) Hinge complete, Nos. 56373 to 56375 and three 56376 124458 9158 Tilting Centre Drawer Hinge 56441 8328 " " " Lock with two wood screws H in. No. 2 28076 8328 Tilting Centre Drawer Lock E.scutcheon..

Note: When ordering No. 28076, state finish

124428 9158 Tilting Centre Drawer Lock Key 124448 9158 " " " Stop

KNEE CONTROL FOR LIBRARY CABINET TABLE SET No. 40

NO. PLATE NAME 192215 Contrcller complete, for 32 to 55 volts, A. C. or D. C. Motor, Nos. 51007d, 192151,192211,192273,192274,192279, 192298,192299,192302,192304,192305, 899279, two each 23258, 50231j,50939r, 701690 and four wood screws y in. No. 7 Rd. Hd. 0. and A

From the library of: Superior Sewing Machine & Supply LLC 40 KNEE CONTROL FOR CABINET SET No. 40

NO. PLATE NAME 192216 Controller complete, for 95 to 145 volts, A. C. or D. C. Motor, Nos. 51007d, 192140,192151,192273,192274,192279, 192298,192299,192302,192304,192305, 899279, two each 23258,50231j, 50939r, 701690 and four wood screws in. No. 7 Rd. Hd. O. and A 192217 Controller complete, for 150 to 250 volts, A. C. or D. C. Motor, Nos. 51007d, 192141,192151,192273,192274,192279, 192298,192299,192302,192304,192305, 899279,two each 23258,50231J,50939r, 701690 and four wood screws in. No. 7 Rd. Hd. 0. and A 192152 Controller Lead 67374 8197 " Cord Clamp 192307 Controller Lead Cord Clamp complete, two No.67374 and wood screw ^in. No. 9 R. H. B ♦191960 Controller Lead Terminal Clip Body ♦191961 " " " « " Cap 192151 9162 Controller Lead complete. No. 192152 and four each 191960 and 191961 192211 9161 Controller Resistance Unit, for 32 to 55 volts 192140 9161 Controller Resistance Unit, for 95 to 145 volts 192141 9161 Controller Resistance Unit, for 150 to 250 volts 192270 Controller Resistance Unit Base with 192272 192269 9161 Controller Resistance Unit Base 192270 with 192335 and 192336 192279 Controller Resistance Unit Base 192269 with 192145 and four 192280 192298 9160 Controller Resistance Unit Cover 192299 9160 " " " " Insulation (paper) 50231J 8102 Controller Resistance Unit Cover Screw... 192149 9161 " Driver 192273 9161 Controller Resistance Unit Driver com plete, Nos. 192149 and 192308 192308 9161 (ontroUer Resistance Unit Driver Shaft ♦192335 <( a « it it Bushing ♦192336 Controller Resistance Unit Driver Shaft Bushing Flange

From the library of: Superior Sewing Machine & Supply LLC KNEE CONTROL FOR CABINET SET No. 40 41

NO. PLATE NAME 192274 8197 Controller Resistance Unit Driver Spring 192272 8197 a a a u u Guide Pin 192305 8197 Controller ResistanceUnit Operating Lever with 192306 51007D 9163 Controller Resistance UnitOperating Lever Hinge Screw 192302 9159 ControllerResistanceUnitOperatingScrew Adjusting Nut (insulating) with 192303 192303 ControllerResistanceUnitOperatingScrew Adjusting Nut Insert (brass) 192304 8197 Controller ResistanceUnitOperatingScrew Locking Washer 192306 8197 Controller ResistanceUnitOperatingScrew Locking Washer Position Pin 192145 Controller Resistance Unit Plate 192280 8197 " " " " Rivet... 50939R 9163 " " " Screw 701690 9159 " " " Washer (large) 23258 8197 Controller Resistance Unit Screw Washer (small) 191123 8322 Knee Plate 192394 Knee Plate complete, Nos. 41c, 1650c, 191123 and 192393 192393 9160 Knee Plate Bracket with 51016c 51016c 8102 " " " Set Screw 41o 8326 " " Hinge Screw 1650c 8102 " " " Nut 190984 Lead complete, from lamp socket to twin terminal block, Nos. 190985,192540 and two 190659 190985 Lead for 190984 ♦190552 8329 Connecting Plug Ferrule ♦190615 8329 " " Insert (moulded).. ♦50520 8329 " " " Screw (brass) ♦190553 8329 " " Washer 190484 8329 •' '' Insulation Washer (fibre) 190659 Lead Connecting Plug female half) Nos. 50520, 190484, 190552, 190553 and 190615 192540 9161 Lead Plug complete, for lamp socket, Nos. 192541 to 192543 192541 Lead Plug Base 192542 9161 " " Cap 192543 9159 " " Flash Disc (fibre)

From the library of: Superior Sewing Machine & Supply LLC 42 KNEE CONTROL FOR CABINET SET No. 40

NO. PLATE NAME 899279 Name Plate for 192215 to 192217 191938 9159 Screw Eye 191937 " 191938 with 191939 191939 9159 " " Insulation (rubber) 191956 8190 Single Terminal Block (moulded) with 191958 191958 Single Terminal Insert 51523 8190 Thumb Nut with 191959 191959 " " " " Insert 191930 8190 Single Terminal complete, Nos. 51523, 191956 and two wood screws % in. No. 6 Rd. Hd. O. and A 191932 8197 Twin Terminal Block 191933 8197 Post 1785 8197 " Nut 51523 8190 " " " Thumb Nut with 191959 191959 — Twin Terminal Post Thumb Nut Insert.. 191934 8197 Twin Terminal complete, Nos. 191932 and two each 1785, 51523, 191933 and wood screws 1)^2 in. No. 12 Rd. Hd. O. and A

TRIMMINGS FOR PORTABLE CASE SET No. 203

OBSOLETE

NO. PLATE NAME 124355 9151 Attachment Box Holder with two wood .screws ? 8 in. No. 5 R. H. B 124360 9157 Attachment Till Cover 124361 Attachment Till Cover complete, Nos. 124360, 124362, 124363 and two 124364 124362 4924 Attachment Till Cover Latch 124363 4924 " " " " Button 124364 4924 " " " " "Washer 25070 9158 Base Cushion Tack (rubber) 56498 4924 Cover Cushion (felt) 56494 4924 " Hook 56495 4924 " " Plate 124378 9158 " Position Stud 124379 9158 " " " Plate with 124378... 124380 9158 " " Plate 87724 9157 " Reinforcing Plate 28088 4387 Handle (wood) 50549b 4387 " Bolt

From the library of: Superior Sewing Machine & Supply LLC TRIMMINGS FOR PORTABLE CASE SET No. 203 43

NO. PLATE NAME N.N.83I 4387 Handle Bolt Nut 28229 4387 " Hinge Rivet 124307 4924 " Link 124308 " 124307 with 28229 and 50549b 28231 4387 Handle Stud 124309 Handle complete, Nos.28088,28231,87724 and two each N. N. 83j and 124308.... 124419 Hasp 124420 9157 Hasp complete,Nos. 1792J, 50702b , 124419, 124421 and 124422 124367 9158 Hasp Button 124368 Hasp Button complete, Nos. 124367, 124369 to 124371 and two nickel-plated wood screws in. No. 4

124369 9158 Hasp Button Plate 124370 9158 " " Spring 124371 9158 " Washer 124421 Plate 50702b 9158 " " Screw 1792J 9158 " Nut 124422 9158 *' Spring 124318 4387 Knee Lever Support Bracket (left) with 56493 and two wood screws 5 8 in. No. 3 R. H. B 124358 9157 Knee Lever Support Bracket (right) with 56493 and two wood screws % in. No. 3 R. H. B

56493 4924 Knee Lever Support Bracket Cushion (leather) 124387 4924 Machine Button 124388 " 124387 with 56493 124389 " 124388 with 22436r and 124411 56493 4924 Machine Button Cushion (leather) 732b 9155 *' " Thumb Screw 124390 4924 Bushing 124411 u u u u u 124390 with 732b 22436R 4924 Machine Button Thumb Screw Washer.. 87721 4924 " Hinge Connection 8295 9158 Hinge Pin.... 87722 4924 " Head S.S.368J 9155 " " " Screw 87572 9155 " Washer

From the library of: Superior Sewing Machine & Supply LLC 44 TRIMMINGS FOR PORTABLE CASE SET No.203

NO. PLATE 87723 Machine Hinge complete, Nos. S. S. 368j, 8295, 87572, 87721 and 87722 28242 9155 Machine Rest Cushion (leather) with 5604 5604 8328 " " " Pin per 100 1243.«4 9157 Oil Can Holder with two wood screws in. No. 5 R. H. B

TRIMMINGS FOR PORTABLE CASE SET No. 204

NO. PL.ATE NAME 124355 9151 Attachment Box Holder with two wood screws in. No. 5 R. H. B 25070 9158 Base Cushion Tack (rubber) 56498 4924 Cover Cushion (felt) 56494 4924 " Hook 56495 4924 " " Plate 124429 9157 " Lock 28076 8328 " Escutcheon Note; When ordering No. 28076, state finish 124428 9158 Cover Lock Key 87427 9157 " " Plate 87724 9157 " Reinforcing Plate 28088 4387 Handle (wood) 50549b 4387 " Bolt N.N.83J 4387 " " Nut 28229 4387 *' Hinge Rivet 124307 4924 " Link 124308 " " 124307 with 28229 and 50549b 28231 4387 Handle Stud 124309 Handle complete, Nos.28088,28231,87724 and two each N. N. 83j and 124308.... 124318 4387 Knee Lever Support Bracket (left) with 56493 and two wood screws Ys in. No. 3 R. H. B 124358 9157 Knee Lever Support Bracket (right) with 56493 and two wood screws Y& ii^- No. 3 R. H. B 56493 4924 Knee Lever Support Bracket Cushion (leather) 124387 4924 Machine Button 124388 " " 124387 with 56493 124389 " " 124388 with 22436R and 124411

From the library of: Superior Sewing Machine & Supply LLC TRIMMINGS FOR PORTABLE CASE SET No.204 45

NAME 56493 4924 Machine Button Cushion (leather) 732b 9155 " " Thumbscrew 124390 4924 Bushing 124411 « ii U U if 124390 with 732b 22436R 4924 Machine Button Thumb Screw Washer.. 87721 4924 " Hinge Connection 8295 9158 Hinge Pin... 87722 4924 " Head S.S.368J 9155 " Screw 87572 9155 " Washer 87723 Machine Hinge complete, Nos. S. S. 368.1, 8295, 87572, 87721 and 87722 28242 9155 Machine Rest Cushion (leather) with 5604 5604 8328 " " " Pin per 100 124354 9157 Oil Can Holder with two wood screws ? « in. No. 5 R. H. B

KNEE CONTROL FOR PORTABLE CASE SET No. 204

NO. PLATE NAME 192353 Controller complete, for 32 to 55 volts, A. C. or D. C. Motor, Nos. 51007d, 191278,192211,192269,192273,192274, 192302,192304,192305,192356,192358, 899279 and two each 23258, 50939r and 701690 192354 Controller complete, for 95 to 145 volts, A. C. or D. C. Motor, Nos. 51007d, 191278,192140,192269,192273,192274, 192302,192304,192305,192356,192358, 899279 and two each 23258, 50939r and 701690 192355 Controller complete, for 150 to 250 volts, A. C. or D. C. Motor, Nos. 51007d, 191278,192141,192269,192273,192274, 192302,192304,192305,192356,192358, 899279 and two each 23258,50939r and 701690 192357 Controller Lead for 192356 192356 9160 Controller Lead complete, 6 in. long. No. 192357 and two each 191960 and 191961 192359 Controller Lead for 192358 192358 9160 Controller Lead complete, 5 in. long. No. 192359 and two each 191960 and 191961

From the library of: Superior Sewing Machine & Supply LLC 46 KNEE CONTROL FOR PORTABLE CASE SET No.204

NO. PLATE NAME ♦191960 Controller Lead Terminal Clip Body ♦191961 " " " " " Cap 192211 9161 " Resistance Unit, for 32 to 55 volts 192140 9161 Controller Resistance Unit, for 95 to 145 volts 192141 9161 Controller Resistance Unit, for 150 to 250 volts 192270 Controller Resistance Unit Base with 192272 192269 9161 Controller Resistance Unit Base 192270 with 192335 and 192336 50018r 9163 Controller Resistance Unit Base Screw 191703 9159 " " " " Washer 192149 9161 Controller Resistance Unit Driver 192273 9161 Controller Resistance Unit Driver com plete, Nos. 192149 and 192308 191278 9163 Controller Resistance Unit Driver Actu ating Collar with 50200c 50200c 9163 Controller Resistance Unit Driver Actu ating Collar Set Screw 192308 9161 Controller Resistance Unit Driver Shaft ♦192335 " " " " " Bushing ♦192336 Controller Resistance Unit Driver Shaft Bushing Flange 192274 8197 Controller Resistance Unit Driver Spring 192272 8197 " " " " " Guide Pin 192305 8197 Controller ResistanceUnitOperatingLever with 192306 51007d 9163 ControllerResistanceUnitOperatingLever Hinge Screw 192302 9159 ControllerResistanceUnitOperatingScrew Adjusting Nut (insulating) with 192303 192303 ControllerResistanceUnitOperatingScrew Adjusting Nut Insert (brass) 192304 8197 ControllerResistanceUnitOperatingScrew Locking Washer 192306 8197 ControllerResistanceUnitOperatingScrew Locking Washer Position Pin 50939r 9163 Controller Resistance Unit Screw 701690 9159 " " " " Washer (large) 23258 8197 Controller Resistance Unit Screw Wa.sher (small)

From the library of: Superior Sewing Machine & Supply LLC KNEE CONTROL FOR PORTABLE CASE SET No.204 47

NO. PLATE NAME 192082 9151 Knee Lever with 191290 and two 7958 (aluminum) ♦191290 Knee Lever Socket 7958 9159 " Pin 190985 Lead for 190984 190984 Lead complete,from lamp socket to motor and controller, Nos. 190985,192540 and two 190659 191953 9163 Lead Bushing ♦190552 8329 " Connecting Plug Ferrule ♦190615 8329 " " " Insert (moulded) .. ♦50520 8329 " " " " Screw (brass) ♦190553 8329 " Washer ♦190484 8329 " " " Insulating Washer (fibre) 190659 Lead Connecting Plug (female half) Nos. 50520, 190484, 190552, 190553 and 190615 192540 9161 Lead Plug complete, for lamp socket. Nos. 192541 to 192543 192541 Lead Plug Base 192542 9161 " " Cap 192543 9159 " " Flash Disc (fibre) 899279 Name Plate for 192353 to 192355 191956 8190 Single Terminal Block (moulded) with 191958 191958 Single Terminal Insert 51523 8190 " " Thumb Nut with 191959 191959 " " " Insert 191930 8190 Single Terminal complete, Nos. 51523, 191956 and two wood screws M No. 6 Rd. Hd. 0. and A 191957 8190 Twin Terminal Block (moulded) with two 191958 192083 9161 Twin Terminal Cover 191958 " " Insert 191928 8190 " Nut with 191929 191929 8190 " " " Insert 191926 8190 Twin Terminal complete, No. 191957 and two each 191928 and wood screws 1 in. No. 6 Rd. Hd. 0. and A

From the library of: Superior Sewing Machine & Supply LLC 48

Trimmings for Eiectric Combination Tabie Set No. 304

NO. PL.ATE NAME 124434 9157 Corner Brace 798b 9155 Cover Bar Bolt 1636r 9155 " " " Lock Nut 1636r 9155 " •' " Nut 124435 9157 " *' '• " Washer 124436 9157 " Retaining Washer 124437 9157 '* Lock 124438 9157 " Position Plate 56441 8328 Drawer Lock with two wood screws ttt* No. 2 28076 8328 Drawer Lock Escutcheon ".... Note: When ordering No. 28076. state finish

124428 9158 Drawer Lock Key 192439 9151 Knee Lever with 192440 ♦192440 " '• Socket 9525 9155 *' " Turn Button Wood Screw Washer 124492 9157 Leg Socket 5604 8328 " " Pin per 100 124447 9151 Machine Rest 5604 8328 " " Cushion Pin per 100

SINGERLIGHTS SINGERUGHT FOR 101-2 AND 101-10 MACHINES OBSOLETE

NO. PLATE NAME 191773 9161 Singcrlight Elbow with two 620c 191775 9159 " " Nipple 620c 9163 " " Set Screw 190757 9162 " Lead Tube (lead) 191778 " " Wire 701304 9159 " " " Insulating Washer (fibre) 191774 Singerlight Nipple Collar 191792 9159 " " " 191774 with 2523 2523 9159 " " " Pin *191785 8190 " " " Washer (felt) Vi i"

From the library of: Superior Sewing Machine & Supply LLC SINGERLIGHT FOR 101-2 AND 101-10 MACHINES 49

NO. PLATE NAME *191786 8190 Singerlight Nipple Collar Washer (felt) ^ in 191082 8197 Singerlight Nipple Collar Washer (steel).. 190745 9161 " Shade 191982 Singerlight Toggle Socket complete, Nos. 50564J, 191375, 191381 and 191963 to 191965 *191375 9163 Singerlight Toggle Socket Base complete, Nos. 191376 and 191377 *191377 Singerlight Toggle Socket Base Hub *191381 9163 " " " " Insulation 50564J 9163 " " " " Set Screw *191376 " " " " Shell 191965 8102 Singerlight Toggle Socket Internal Fitting complete *191963 8102 Singerlight Toggle Socket Shell *191964 8102 " " " " Insulation 192537 9162 Singerlight (flexible, less lamp) complete, Nos. 190745, 190757, 191082, 191773. 191775,191792,191962,701304 and two each 191778, 191785 and 191786

SINGERLIGHT FOR 101-3 MACHINE

NO. PLATE NAME 191773 9161 Singerlight Elbow with two 620c 191775 9159 " " Nipple 620c 9163 " " Set Screw 192160 " Lead, 29 in. long 192158 Singerlight Lead (long) complete, Nos. 191960, 191961 and 192160 192161 Singerlight Lead, 28 in. long 192159 Singerlight Lead (short) complete, Nos. 191960, 191961 and 192161 701304 9159 SingerlightLeadlnsulating Washer (fibre) *191960 " " Terminal Clip Body •191961 « « " « " Cap 192101 9162 " " Tube (lead) 191774 " Nipple Collar 191792 9159 " " " 191774 with 2523 2523 9159 " " " Pin *191785 8190 " " " Washer (felt) H in *191786 8190 Singerlight Nipple Collar Wa.sher (felt) ^8 in 191082 8197 Singerlight Nipple Collar Washer (steel).. 190745 9161 " Shade

From the library of: Superior Sewing Machine & Supply LLC 50 SINGERLIGHT FOR 101-3 MACHINE

NO. PLATE NAME 191962 Singerlight Toggle Socket complete, Nos. 50564J, 191375, 191381 and 191963 to 191965 : *191375 9163 Singerlight Toggle Socket Base complete, Nos. 191376 and 191377 *191377 Singerlight Toggle Socket Base Hub *191381 9163 " " " " Insulation 50564J 9163 " " " " Set Screw *191376 " " " " Shell 191965 8102 Singerlight Toggle Socket Internal Fitting complete *191963 8102 SingerUght Toggle Socket Shell *191964 8102 " " " Insulation 192156 9162 Singerlight (flexil)le, less lamp) complete, Nos. 190745, 191032, 191773, 191775, 191792,191962,192101,192158,192159, 701304 and two each 191785and 191786.

SINGERLIGHT FOR lOl-ll MACHINE

NO. PL.\TE NAME 191773 9161 Singerlight Elbow with two 620c 191775 9159 " " Nipple 620c 9163 " " Set Screw 192101 9162 " Lead Tube (lead) 192103 « " Wire 701304 9159 " " " Insulating Washer (fibre) 192102 Singerlight Lead Wire complete, Nos. 191960, 191961 and 192103 *191960 Singerlight Lead Wire Terminal Clip Body *191961 " " Cap 191774 Singerlight Nipple Collar 191792 9159 " " •' 191774 with 2523 2523 9159 " " " Pin *191785 8190 •' " " Washer (felt) H in *191786 3190 Singerlight Nipple Collar Washer (felt) in 191082 S197 Singerlight Nipple Collar Washer (steel) 190745 9161 " Shade 191962 Singerlight Toggle Socket complete, Nos. 505641, 191375, 191381 and 191963 to 191965 *191375 9163 Singerlight Toggle Socket Base complete, Nos. 191376 and 191377

From the library of: Superior Sewing Machine & Supply LLC SIXGERLIGHT FOR 101-11 MACHINE 51

NO. PL.\TE N.\ME *191377 Singerlight Toggle Socket Base Hub *191381 9163 " " " " In.sulatioii 50564j 9163 " " " " Set Screw *191376 « " " " Shell 191965 8102 Singerlight Toggle Socket Internal Fitting complete *191963 8102 Singerlight Toggle S6eket Shell *191964 8102 " " " " In.sulation 192099 9162 Singerlight (flexible, less lamp) complete, Nos. 190745, 191082, 191773, 191775, 191792, 191962, 192101, 701304 and two each 191785, 191786 and 192102...

SINGERLIGHT LAMP

NO. PL.\TE NAME 190744 9161 Singerlight Lamp Note: When ordering No. 190744, state voltage required We are prepared to furnish the following voltages; 32 200 to 220 50 230 to 250 110 to 120 Other voltages can be furnished if required

OBSOLETE FARTS

NO. PL.'VTE NAME 66507 8301 Arm Shaft (horizontal) 66508 8301 " Bushing (l>ack)and Bobbin Winder Bracket (belt cover) .. 66511 8302 Arm Shaft (horizontal) Clamp Stop Mo tion Collar with two 791c 66642 8302 Arm Shaft (horizontal) Bevel Gear (right hand spiral) with two 1259c 66614 8302 Arm Shaft (horizontal) Gear 66615 8302 " " " " Clutch 66616 8302 " " " " " Spring 66617 8302 " " " " Collar with two 457c 457c 8302 Arm Shaft (horizontal) Gear Collar Set Screw 66659 Arm Shaft (horizontal) Gear Washer 66644 8302 " (upright) Gear (lower) with two 1259c 66644 8302 Arm Shaft (upright) Gear (upper) with two 12590

From the library of: Superior Sewing Machine & Supply LLC 52 OBSOLETE PARTS

NO. PLATE NAME 66637 8301 Balance Wheel with two 448c 66599 8314 Bobbin Winder Frame 66600 8314 " 66599 with 66604 66627 Bobbin Winder Frame complete, Nos. 190b, 66600 to 66602, 66606, 66607 and 66613 •32645 Bobbin Winder Pulley (hide-ite leather).,. 66650 8314 "' 32645 with 66603 and two 32647 66602 8314 Bobbin Winder Pulley complete, Nos. 66605 and 66650 66603 Bobbin Winder Pulley Bushing 66604 8314 " " " Cover 66605 8314 " Shaft •32647 " " " Washer (steel) 66606 8314 " " Spindle 66607 8314 " Collar with 50485f and 66598 50465f 8314 Bobbin Winder Spindle Collar Set Screw.. 66611 8314 " " Tension Bracket 66612 Bobbin Winder Tension Bracket complete, Nos. 208b, 9544, 9545,10106 and 66611 66613 8314 Bobbin Winder Tripping Arm 66521 8301 Clamp Stop Motion Flanged Bushing •66704 Face Plate 66527 8303 " 66704 with 2827, use 66723 with 50996 107b 8308 Face Plate Screw (upper) 56347 8311 Leg Socket 56348 8328 Machine Hinge Connection 56349 8328 Machine Hinge complete, Nos. 2809, 15263, 56348 and wood screw in. No. 10, use 51045 and 124494 124325 8322 Machine Lifting Plate 124326 8328 " " Plunger 124327 8328 " " " Spring .... 50061J 8328 « " " " " Screw 124328 " « " 124325 with 50061J, 124326 and 124327, use 124348 124329 Machine Lifting Plate 124328 with 28123 and 56262, use 124349 124330 Machine Lifting Plate complete, Nos. 9281, 50251e, 56260, 56261 and 124329, use 124350 66567 8306 Needle Bar with 32519, use 66705 930e 8306 Needle Bar Connecting Link Adjusting Screw

From the library of: Superior Sewing Machine & Supply LLC OBSOLETE PARTS 53

NO. PI.ATE NAME

66666 — Needle Clamp *66647 " with 66648, for 66649 66667 *' •' Slide *66648 •' •' Sliding Section 66562 Oil Reservoir 66629 8307 *• " Oil Tube, for oiling 51823 and 66535 66630 8307 Oil Reservoir Oil Tube, for oiling 66533 and 66578 66631 8307 Oil Reservoir Oil Tube,for oiling 66537— 66632 8307 " " " " " 66554.... 66633 8307 " " '• " 66554and 66556 66634 8303 Oil Reservoir complete, Nos. 66562,66563, 66631, 66632 and two each 66629,66630 and 66633 .50460e 8308 Oil Reservoir Screw 66563 8303 Wick 3100 8303 Pre.sser Bar Spring 66569 8307 Rotating Hook, use 66726 66570 " " 66569 with 234f, 66584, 66588 and two 50151d, use 66727 66571 Rotary Hook 66570 with 66573,use 66728.. 66572 8307 " " Bobbin Case, use 66729

66573 " Rotating Hook Bobbin Case complete, Nos. 591f, 1173d, 50461c, 60462c, 66572, 66574, 66575 and 66577, use 66730 66644 8302 Rotary Hook Driving Shaft Gear (back) with two 1259c 66582 8303 Rotating Hook Driving Shaft Gear (front) with two 1259c 66584 8307 Rotating Hook Section, use 66731 66587 8307 " " Shaft Gear with two 1253c 25538 5635 Screw Driver (shuttle tension) use 120378 56442 8311 Shield Chain, 6H in. long 56443 " " 56442 with 640b, 56444 and wood screw H in. No. 5 R. H. B 56444 8328 Shield Chain Plate 640b 8328 " " " Screw *66645 Stripper Foot with 8505 8505 8302 " " Spring Rivet per 100 66649 8312 Stripper Foot and Needle Clamp complete, for darning and embroidery \vork, for 120285, Nos. 552c, 66645, 66646, 66666 and 66667, use 86294 28234 8311 Table Leaf (left) Hinge

From the library of: Superior Sewing Machine & Supply LLC 54 OBSOLETE PARTS

ELECTRICAL PARTS

NO. PLATE NAME 190535 8325 Armature Shaft Bearing Sleeve (front) 190536 8325 « « « « » pjj,g 50555c 8325 Brush Holder Tube Cap Serew 191106 Controller Resistance Unit for 191111.. 190294 8324 " " 190878.. 190822 " " " " 190880.. 190297 " " " 190.881.. 190299 " " " " 160882.. 190936 8329 '* " " Contact Lever Driver Spring 50560E 8326 Controller Resistance Unit Screw 190598 8329 " Washer (fibre) 190827 Controller Rock Shaft 190828 Controller Rock Shaft complete for Library Cabinet Table Set No. 19, Nos. 41c, 190827 and 190831, use 191122 190831 Controller Rock Shaft Knee Plate 41c 8326 " Hinge Screw 190355 8323 Lead Plug, for lamp socket, use 192540..

SINGER Needles should be used in SINGER Machines. These Needles end their Containers are marked with the Company's Trade Mark"SIMANCO.**"

Needles in Containers marked "FOR SINGER MACHINES" are NOT SINGER made needles.

From the library of: Superior Sewing Machine & Supply LLC NUMERICAL

LIST

OF PARTS

;:%J:

From the library of: Superior Sewing Machine & Supply LLC 55

NUMERICAL LIST OF PARTS

NO. PLATE NAME 41c 8326 Controller Rock Shaft Knee Plate Hinge Screw for 190828, obsolete 41c 8326 Knee Plate Hinge Screw for 192394 N.N.83J 4387 Handle Bolt Nut for 124309 85d 8305 Presser Bar Lifter Hinge Screw 97e 8308 Tension Releasing Lever Hinge Screw.... 107b 8308 Face Plate Screw (upper) obsolete 145d 8308 Bobbin Winder Bracket Screw for 66669 and 66690 181d 8305 Feed Regulating Stud Head Cap Screw.. 184j 8325 Controller Resistance Unit Contact Lever Driver Connecting Rod Screw for 101-2 and 101-10 Machines, obsolete 190d 8314 Bobbin Winder Tripping Arm Screw for 66627, 66674 and 66691 200c 8305 Feed Regulator Set Screw for 66551 207j 8314 Bobbin Winder Tension Bracket Screw for 66673 208b 8314 Bobbin Winder Tension Disc Cover Screw for 66612 and 66673 212d 8305 Feed Regulating Stud Spring Screw 217d 8307 Rotating Hook Bobbin Case Position Plate Screw 219a 8308 Face Plate Screw (lower) 219j 8308 Slack Thread Regulator Screw 234p 8307 Rotating Hook Thread Guard Screw for 66570 and 66726 248a 8302 Clamp Stop Motion Clamping Nut Stop Screw 286d 8308 Presser Foot Thumb Screw 287b 5635 Cloth Plate Thumb Screw for 120285 337d 9155 Presser Foot Graduated Adjustable Guide Clamp Screw for'35207 S.S.368J 9155 Machine Hinge Head Screw for 87723— 400k 8305 Presser Bar Guide Bracket Adjusting Screw for 32535 435c 8304 Feed Lifting Rock Shaft Bushing Set Screw 435c 8304 Feed Regulating Shaft Centre Set Screw.. 435c 8304 " Regulator Shaft Bushing Set Screw.. 435c 8304 " Rock Shaft Centre (right) Set Screw 435c 8304 Rotating Hook Driving Shaft Bushing (front) Set Screw

From the library of: Superior Sewing Machine & Supply LLC 56 NUMERICAL LIST OF PARTS

NO. PLATE NAME 440c 8308 Armature Shaft Bearing Sleeve (back) Set Screw for 190680 and 192455 440c 8308 Armature Shaft Bearing Sleeve (front) Set Screw* for 190680 and 192455 440c 8308 Rotating Hook Shaft Bushing Set Screw.. 440c 8308 Tension Stud Set Screw 446c 8308 Arm Shaft (horizontal) Bushing (front) Set Screw 446c 8308 Rotating Hook Driving Shaft Bushing (back) Set Screw 447c 8306 Thread Take-up Lever Link Hinge Pin Set Screw 448c 8308 Arm Shaft (upright) Busliing (lower) Set Screw 448c 8308 Arm Shaft (upright) Bushing (upper) Set Screw 448c 8308 Balance Wheel Set Screw for 66637 and 66696 448c 8308 Feed Rock Shaft Centre (left) Set Screw.. 453c 8305 Presser Bar Guide Bracket Set Screw for 32535 457c 8302 Arm Shaft (horizontal) Gear Collar Set Screw for 66617, obsolete 457c 8302 Feed Bar Centre Set Screw for 66554 457c 8302 " Rock Shaft Connection Hinge Pin Set Screw* for 66555 457c 8302 Lead Wire Tube Ferrule (upper) Set Screw for 190680 and 192455 458c 8325 Brush Holder Insulating Bushing Set Screw* for 190680 and 192455 460c 8305 Feed Regulator Roller and Stud Set Screw for 66555 460c 8305 Feed Regulator Shaft Collar Set Screw for 6533 S. S.476C 9155 Darning Foot Clamp Thumb Screw for 86294 552c 8306 Needle Clamp Thumb Screw for 2054 and 66649 591F 8307 Rotating Hook Bobbin Case Tension Reg ulating Screw for 66573 and 66730 620c 9163 Singerlight Elbow Set Screw for 191773.. 624c 9152 Arm Shaft (horizontal) Gear Collar Set Screw for 66712 640b 8328 Shield Chain Plate Screw for 56443, obso lete 647d 8326 Motor Frame Screw 665b 8306 Needle Bar Thread Guard Screw

From the library of: Superior Sewing Machine & Supply LLC NUMERICAL LIST OF PARTS 57

NO. PLATE NAME 691a 8308 Cloth Plate Screw 691a 8308 Throat Plate Screw 732b 9155 Machine Button Thumb Screw for 124411 791c 8302 Arm Shaft (horizontal) Clamp Stop Mo tion Collar Set Screw for 66511 and 66693 79Sr 9155 Cover Bar Bolt for Electric Combination Table Set No. 304 930b 8306 Needle Bar Connecting Link Adjusting Screw, obsolete 1036c 8306 Needle Bar Crank Set Screw for 66560... 1036c 8306 Thread Take-up Crank Set Screw 1057e 8308 Feed Lifting Rock Shaft Crank (back) Clamping Screw for 66537 1094f 8308 Feed Dog Screw 1130e 8306 Needle Bar Connecting Link Cap Screw for 66652 1133e 8306 Needle Bar Bushing Set Screw 1134c 8306 " Crank Position Screw for 66560 1173d 8307 Rotating Hook Bobbin Case Tension Spring Screw for 66573 and 66730 1231j 8326 Controller Box Side Cover Screw for 101-2 and 101-10 Machines, obsolete 1253c 8304 Feed Cam and Feed Lifting Eccentric Set Screw for 66533 r253c 8304 Rotating Hook Shaft Bevel Gear SetScrew for 66587 and 66679 1259c 8302 Arm Shaft (horizontal) Bevel Gear Set Screw for 66642 and 66675 1259c 8302 Arm Shaft (upright) Bevel Gear (lower) Set Screw for 66644 and 66677 1259c 8302 Arm Shaft (upright) Bevel Gear (upper) Set Screw for 66644 and 66677 1259c 8302 Feed Lifting Rock Shaft Crank (front) Set Screw for 66540... 1259c 8302 Rotating Hook Driving Shaft Bevel Gear (back) Set Screw for 66644 and 66676.. 1259c 8302 Rotating Hook Driving Shaft Bevel Gear (front) Set Screw for 66582 and 66678.. 1353c 8306 Needle Bar Connecting Stud Set Screw for 66559 1477j 8325 Controller Resistance Unit Contact Lever Driver Spring Stud Bracket Screw for 101-2 and 101-10 Machines, obsolete.. 1497b 9163 Controller Rock Shaft Centre (front) Set Screw for 190830, obsolete

From the library of: Superior Sewing Machine & Supply LLC 58 NUMERICAL LIST OF PARTS

NO. PI..\TE NAME 1560b 8308 Tension Regulating Thumb Nut for 66660 1636r 9155 Cover Bar Bolt Lock Nut for Electric Combination Table Set No. 304 1636r 9155 Cover Bar Bolt Nut for Electric Combina tion Table Set No. 304 1650c 8102 Knee Plate Hinge Screw Nut for 192394.. 1734e 8326 Counterbalance Spring Adjusting Collar Bolt Nut for 50251e 1752b 8302 Clamp Stop Motion Clamping Nut 1768 8329 Lead Plug Screw Nut for 190851, obsolete 1785 8197 Twin Terminal Post Nut for 191934 1792.1 9158 Hasp Plate Screw Nut for 124420, obsolete 2054 8306 Needle Clamp with 552c 2070 8305 Presscr Bar Spi'ing Wa.sher 2102 8308 Tension Di.«c for 66660 2523 9159 Singerlight Nipple Collar Pin for 191792.. 2809 8328 Machine Hinge Connection Hinge Pin for 56349 and 124494 2827 8302 Face Plate Thread Guard with 8505. for 66527 and 66723 3100 8303 Presser Bar Spring, obsolete 5604 8328 Leg Socket Pin for Library Cabinet Table Set No. 19, Library Cabinet Table Set No.40 and Electric Combination Table Set No. 304 per 100 5604 8328 Machine Rest Cushion Pin for 28242 and 124447 per 100 6533 8305 Feed Regulator Shaft Collar with 460c.. 7071 8314 Bobbin Winder Tension Bracket Screw Washer for 66673 7958 9159 Knee Lever Socket Pin for 192082 8238 8308 Tension Spring for 66660 8295 9158 Machine Hinge Connection Hinge Pin for 87723 8366 8303 Presser Bar 8422 8308 Thread Guard (head of arm) 8505 8302 Face Plate Thread Guard Rivet for 2827 per 100 8505 8302 Stripper Foot Spring Rivet for 66645, obsolete per 100 8879 8302 Arm Spool Pin Washer (cloth) 8879 8302 Bobbin Winder Spool Pin Washer (cloth) for 66608 9281 8328 Counterbalance Spring Adjusting Collar Bolt Nut Washer for 124330, 124350 and 124452

From the library of: Superior Sewing Machine & Supply LLC NUMERICAL LIST OF PARTS 59

NO. PIRATE NAME 9320 9158 Machine Lifting Plate Plunger Spring Stop Pin for 124348 per ICQ 9525 9155 Knee Lever Turn Button Wood Screw Washer for Electric Combination Table Set No. 304 9544 8314 Bobbin Winder Tension Disc Cover for 66612 and 66673 9545 8314 Bobbin Winder Tension Disc Spring for 66612 and 66673 10106 8314 Bobbin Winder Tension Disc for 66612 and 66673 12329 8308 Tension Releasing Lever Spring 15263 8328 Machine Hinge Plate for 56349 and 124494 15287 8326 Bobbin Winder Friction Ring (rubber) for 66674 and 66691 15288 8326 Bobbin Winder Pulley for 66674 and 66691 15429 9155 Presser Foot, for stitching on edge and inserting cord 21360 8306 Needle Bar Hole Plug 22436R 4924 Machine Button Thumb Screw Washer for 124389 23258 8197 Controller Resistance Unit Screw Washer (small) for 192215 to 192217 and 192353 to 192355 25070 9158 Base Cushion Tack (rubber) for Portable Case Set No. 203 and Portable Case Set No. 204 25152 8316 Machine Cushion (felt) for Library Cab inet Table Set No. 19 and Library Cab inet Table Set No. 40 25525 5635 Bias Gauge (Attachments) 25527b 5635 Cloth Guide for 120285 25537 5635 Screw Driver (machine) for 120285 25538 5635 " " (shuttle tension) for 120285, obsolete, use 120378 25539 5635 Stiletto (Attachments) 26075 8308 Thread Cutter and Holder 28076 8328 Cover Lock Escutcheon for Portable Case Set No. 204 28076 8328 Drawer Lock Escutcheon for Library Cab inet Table Set No. 19 and Electric Com bination Table Set No. 304 28076 8328 Oil Can Door Escutcheon for Library Cab inet Table Set No. 19, obsolete 28076 8328 Tilting Centre Drawer Lock Escutcheon for Library Cabinet Table Set No. 40.. 28088 4387 Handle (wood) for 124309

From the library of: Superior Sewing Machine & Supply LLC 60 NUMERICAL LIST OF PARTS

NO. PLATE NAME 28123 8328 Machine Lifting Plate Hinge Pin for 124329, 124349 and 124451 28183 8316 Oil Can Door Hinge for Library Cabinet Table Set No. 19, obsolete 28229 4387 Handle Hinge Rivet for 124308 28231 4387 Stud for 124309 28233 8328 Drawer Lock Key for Library Cabinet Table Set No. 19, obsolete 28234 8311 Table Leaf (left) Hinge for Library Cab inet Table Set No. 19, obsolete 28242 9155 Machine Rest Cushion (leather) with 5604, for Portable Case Set No. 203 and Port able Case Set No. 204 28253 8316 Tilting Centre Drawer Hinge for Library Cabinet Table Set No. 19, obsolete.... 28291 8328 Shield Hinge for Lilirary Cabinet Table Set No. 19 and Library Cabinet Table Set No. 40 32519 8306 Needle Stop Pin for 66557 and 66705.... 32522 8307 Bobbins (five) for 120285 32522 8307 Rotating Hook Bobbin 32535 8305 Presser Bar Guide Bracket with 400k and 453c 32543 8306 Thread Take-up Lever Hinge Stud for 66594 32572 8308 Tension Releasing Disc for 66660 32573 8308 " " Lever....." *32645 Bobbin Winder Pulley (hide-ite leather) for 66650, obsolete *32647 Bobbin Winder Pulley Washer (steel) for 66650, obsolete 32675 9154 Presser Bar Spring ;. 35002 9155 '• Foot Extension for 35207 35003 9155 " " Graduated Adjustable Guide (long, left) for 35207 35004 9155 Presser Foot Graduated Adjustable Guide (long, right) for 35207 35005 9155 Presser Foot Graduated Adjustable Guide (short, right) for 35207 35006 9155 Presser Foot Graduated Adjustable Guide (short, right) flush, for 35207 35135 9155 Presser Foot Graduated Adjustable Guide Clamp for 35207 35205 Presser Foot for 35207 35206 9155 " " Graduated Adjustable Guide Clamp Lever for 35207

From the library of: Superior Sewing Machine & Supply LLC NUMERICAL LIST OF PARTS 61

NO. PLATE . NAME 35207 9155 PresserFoot with Extension and Graduated Adjustable Guide complete, Nos. 337d, 35002 to 35006; 35135, 35205, 35206 and 36690 35931 8312 Hemmer (adjustable; for 120285 36569 8311 Oiler with 36571, for 36570 36570 " 36569, filled with oil (Acces.sories).. 36571 8311 " Spout, 1^ in. long, with 36807, for 36569 36583 5637 Tucker for 120285 36594 8312 Binder for 120285 36658 9155 Darning Foot Spring Rivet for 86294 per 100 36696 9155 Pre.sser Foot Graduated Adjustable Guide Clamp Steady Pin for 35207 36807 8326 Oiler Spout Washer (leather) for 36571.. 50018r 9163 Controller Resistance Unit Base Screw for Portable Case Set No. 204 50023b 8308 Pressure Regulating Thumb Screw 50061J 8328 Machine Lifting Plate Plunger Spring Screw for 124328, obsolete 60150c 8308 Armature Shaft Gear Set Screw for 190540 50150c 8308 Feed Regulating Shaft Connecting Link Pin Set Screw for 66541 50150c 8308 Feed Regulating Shaft Stud Set Screw for 66541 50150c 8308 Rotating Hook Driving Shaft Collar Set Screw for 66581 50151d 8307 Rotating Hook Section Screw for 66570, 66727 and 66728 50196c 8308 Tension Stud for 66660 50200c 9163 Controller Resistance Unit Driver Actu ating Collar Set Screw for 191278 50231j 8102 Controller Resistance Unit Cover Screw for 192215 to 192217 50251e 8326 Counterbalance Spring Adjusting Collar Bolt with 1734e. for 124330,124350 and 124452 50380c 8326 Machine Hinge Connection Set Screw... 50444e 8328 Table Leaf (left) Rest Rod Stop Screw for 124339 50459c 8304 Feed Lifting Rock Shaft Crank (front) Roller Screw Stud for 66540 50460e 8308 Oil Reservoir Screw, obsolete 50461c 8307 Rotating Hook Bobbin Case Finger Hinge Screw for 66573 and 66730

From the library of: Superior Sewing Machine & Supply LLC 62 NUMERICAL LIST OF PARTS

NO. PLATE NAME 50462c 8307 Rotating Hook Bobbin Case Finger Spring Screw for 66573 and 66730 50463f 8307 Rotating Hook Screw 50464b 8314 Bobbin Winder Frame Hinge Screw for 66674 and 66691 50465f 8314 Bobbin Winder Spindle Collar Set Screw for 66607, obsolete 50466b 8314 Bobbin Winder Stop Latch Hinge Screw for 66674 and 66691 50469e 8326 Field Core Screw for S. E. Motors, obsolete 50470; 8308 Cloth Plate Slide Spring Screw for 66525.. *50520 8329 Connecting Plug Insert Screw (brass) for 190658 and 190838, obsolete *50520 8329 Lead Connecting Plug Insert Screw (brass) for 190659 50520 8329 Lead Plug Insert Screw (brass) for 190851, obsolete 50520 8329 Terminal Block Wire Clamp Screw (brass) for 190867 and 191176, obsolete 50520 8329 Terminal Jumper Plate Screw (brass) for S. E. Motors, obsolete 50549b 4387 Handle Bolt for 124308 50554c 8308 Arm Shaft (horizontal) Bushing (inter mediate) Set Screw 50555c 8325 Brush Holder Tube Cap Screw for S. E. Motors, obsolete 50560e 8326 Controller Resistance Unit Screw for 101-2 and 101-10 Machines, obsolete 50564; 9163 Singerlight Toggle Socket Base Set Screw for 191962 50567 8329 Lead Plug Screw for 190851, obsolete 50568 8325 Terminal Block Connecting Plate Screw for 191002 and 191178, obsolete...!... 50570; 8326 Terminal Block (lower half) Screw for 101-2 and 101-10 Machines, obsolete... 50571; 8326 Terminal Block Screw for 101-2 and 101-10 Machines, obsolete 50583c 8326 Controller Rock Shaft Knee Plate Hinge Screw for 191122, obsolete 50596r 9163 Brush Holder Tube Cap Screw for 190679, ob-solete 50609e 9163 Controller Resistance Unit Screw for 101-2 and 101-10 Machines, obsolete... 50617b 9163 Armature Shaft Bearing Sleeve (front) Cap Screw 50702n 9158 Hasp Plate Screw for 124420, obsolete...

From the library of: Superior Sewing Machine & Supply LLC / NUMERICAL LIST OF PARTS 63

NO. PLATE NAME 50939r 9163 Controller Resistance Unit Screw for 192215 to 192217 and 192363 to 192355 50982e 9154 Oil Reservoir Screw 50996b 9154 Face Plate Screw (upper) 51002e 9154 Needle Bar Connecting Link Adjusting Screw for 66657 51007d 9163 Controller Resistance Unit Operating Lever Hinge Screw for 192215 to 192217 and 192353 to 192355 51016c 8102 Knee Plate Bracket Set Screw for 192393 51032r 9163 Field Core Screw for S. U, Motors 51045c 9158 Machine Hinge Connection Set Screw for Library Cabinet Table Set No. 19 and Library Cabinet Table Set No. 40 51523 8190 Single Terminal Thumb Nut with 191959, for 191930 51523 8190 Twin Terminal Post Thumb Nut with 191959, for 191934 51822 8304 Feed Lifting Rock Shaft Crank (front) Roller for 66540 51823 8305 Feed Regulator Roller and Stud 56033 8305 " Regulating Stud Head Stop Pin for 66548 per 100 56035 8305 Feed Regulating Stud Lock Pin Spring... 56057 8308 Tension Releasing Pin for 66660 56060 8308 Thread Take-up Spring for 66660 56063 8308 " " " Disc Steady Pin for 66596 56064 8308 Thread Take-up Spring Thread Guard for 66660 56260 8322 Counterbalance Spring for 124330,124350 and 124452 56261 8322 (Ik>unterbalance Spring Adjusting Collar for 124330,124350 and 124452 56262 8322 Counterbalance Spring Bracket (hinge) for 124329 and 124349 56347 8311 Leg Socket for library Cabinet Table Set No. 19, obsolete 56348 8328 Machine Hinge Connection for 56349, ob solete 56349 8328 M achine Hinge complete,for Library Cab inet Table Set No. 19, Nos. 2809,15263, 56348 and wood screw % in. No. 10, obsolete, use 51045 and 124494 56352 8316 Machine Platform Flap Hinge (movable) for 66355

From the library of: Superior Sewing Machine & Supply LLC 64 NUMERICAL LIST OF PARTS

NO. PLATE NAME 56353 8316 Machine Platform Flap Hinge (movable) Hinge Pin for 56355 56353 8316 Machine Platform Flap Hinge (movable) Stop Pin for 56355 56354 8316 Machine Platform Flap Hinge (stationary) for 66355 56355 Machine Platform Flap Hinge complete, for Library Cabinet Table Set No. 19 and Library Cabinet Table Set No. 40, Nos. 56352, 56354 and two 56353 56356 8316 Machine Platform Flap Rest for Library Cabinet Table Set No. 19 and Library Cabinet Table Set No. 40 56357 8316 Machine Platform Flap Rest Cushion (cloth) for Library Cabinet Table Set No. 19 and Library Cabinet Table Set No. 40 56358 8311 Oil Can Holder for Library Cabinet Table Set No. 19, obsolete 56372 8322 Table Leaf (left) Rest Rod Tube for Library Cabinet Table Set No. 19 and Library Cabinet Table Set No. 40 56373 8316 Table Leaf (right) Hinge (movable) for 56377 56374 8316 Table Leaf (right) Hinge (stationar}') for 56377 56375 8316 Table Leaf (right) Hinge (stationary) Link for 56377 ' 56376 8316 Table Leaf (right) Hinge (stationary) Link Hinge Pin for 56377 56376 8316 Table Leaf (right) Hinge (stationary) Link Stop Pin for 56377 56377 Table Leaf (right) Hinge complete, for Library Cabinet Table Set No. 19 and Library Cabinet Table Set No. 40, Nos. 56373 to 56375 and three 56376 56441 8328 Drawer Lock with two wood screws in. No. 2, for Librarj' Cabinet Table Set No. 19 and Electric Combination Table Set No. 304 56441 8328 Tilting Centre Drawer Lock with two wood screws yi in. No. 2, for Library Cabinet Table Set No. 40 56442 8311 Shield Chain, 6H in. long, for 56443, obsolete

From the library of: Superior Sewing Machine & Supply LLC NUMERICAL LIST OF PARTS 65

NO. PLATE NAME 56443 Shield Chain 56442 with 640b, 56444 and wood screw H in. No. 5 R. H. B., for Library Cabinet Table Set No. 19. obsolete 56444 8328 Shield Chain Plate for 56443, obsolete... 56469 8316 " Stop with wood screw % in. No. 7 R. H. B., for Library Cabinet Table Set No. 19, obsolete 56493 4924 Knee Lever Support Bracket Cushion (leather) for 124318 and 124358 56493 4924 Machine Button Cushion (leather) for 124388 56494 4924 Cover Hook for Portable Case Set No. 203 and Portable Case Set No. 204 56495 4924 Cover Hook Plate for Portable Case Set No. 203 and Portable Case Set No. 204 56496 8328 Drawer Spring Catch for Library Cabinet Table Set No. 19, obsolete 56496 8328 Oil Can Door Spring Catch for Library Cabinet Table Set No. 19, obsolete 56496 8328 Tilting Centre Drawer Spring Catch for Librar\- Cabinet Table Set No. 19, obsolete 56497 8328 Drawer Spring Catch Cup for Library Cabinet Table Set No. 19, obsolete.... 56497 8328 Oil Can Door Spring Catch Cup for Library Cabinet Table Set No. 19, obsolete.... 56497 8328 Tilting Centre Drawer Spring Catch Cup for Librarj* Cabinet Table Set No. 19, obsolete 56498 4924 Cover Cushion (felt) for Portable Case Set No. 203 and Portable Case Set No. 204 66502 8301 .\rra (lower) Cover (back) 66503 8301 " (front) 66504 8302 " " Plug (large) *. 66505 8302 " " " (small) 66506 8302 " Oil Tube for 66661, 66683, 66724 and 66725 66507 8301 Arm Shaft (horizontal) obsolete 66508 8301 " " " Bushing (back) and Bobbin Winder Bracket (belt cover) obsolete 66509 8301 Arm Shaft (horizontal) Bushing (front)... 66510 8301 " (interme diate) 66511 8302 Arm Shaft (horizontal) Clamp Stop Mo tion Collar with two 791c, obsolete....

From the library of: Superior Sewing Machine & Supply LLC 66 NUMERICAL LIST OF PARTS

NO. PLATE NAME 66514 8301 Ann Shaft (upright) Bushing (lower) 66515 8301 " " " " (upper) 66517 8302 " " " Oil Tube"(lower) for 66661, 66683, 66724 and 66725 66518 8302 Arm Shaft (upright) Oil Tube (upper) for 66661, 66683, 66724 and 66726 66520 8302 Clamp Stop Motion Clamping Nut Washer 66521 8301 " " " Flanged Bushing, ob solete 66522 8322 Cloth Plate for 66523 66523 Cloth Plate complete for 101-2 and 101-3 Machines, Nos. 66522 and 66525 66524 Cloth Plate Slide for 66525 66525 8303 Cloth Plate Slide complete for 66523 and 66688, Nos.66524,66526 and two 50470J 66526 8303 Cloth Plate Slide Spring for 66525 66527 8303 Face Plate 66704 with 2827, obsolete, use 66723 with 50996b 66528 8303 Feed Bar with 66532 66529 8304 " " Centre 66530 8304 " " Spring 66531 8304 " " " Hook (lower) for 66540 66532 8303 " " " " (upper) for 66528 66533 8304 " Cam and Feed Lifting Eccentric with two 1253c 66534 8304 Feed Dog 66535 8304 " Lifting Rock Shaft 66536 8304 " Bushing 66537 8304 " Crank(back) with 1057E 66538 8304 Feed Lifting Rock Shaft Crank (back) Connection 66539 Feed Lifting Rock Shaft Crank (front) for 66540 66540 8304 Feed Lifting Rock Shaft Crank (front) 66539 with 1259c, 50459c, 51822 and 66531 66541 8303 Feed Regulating Shaft with two 50150c.. 66542 8304 " Centre (long) 66542 8304 " Rock Shaft Centre (left) 66542 8304 " (right) 66543 8304 " Regulating Shaft Centre (short) 66544 8304 " " " Connecting Link 66545 8304 u « u u u Pin 66546 8304 Feed Regulating Shaft Stud 66547 8305 " Stud

From the library of: Superior Sewing Machine & Supply LLC NUMERICAL LIST OF PARTS 67

NO. PLATE NAME 66548 8305 Feed Regulating Stud Head with 56033.. 66549 8305 it " Lock Pin 66550 8305 u " Spring 66551 8305 u Regulator with 200c 66552 8305 it Shaft 66553 8305 it " " Bushing 66554 8303 it Rock Shaft with two 457c 66555 8305 a " " Connection with 457c and 460c 66556 8305 Feed Rock Shaft Connection Hinge Pin.. 66557 8306 Needle Bar with 32519, obsolete, use 66705 66558 8306 " " Bushing 66559 8306 " " Connecting Stud with 1353c, for 66651 66560 8306 Needle Bar Crank with 1134c and two 1036c 66561 8306 Needle Bar Timing Gauge 66562 Oil Reservoir for 66634, obsolete 66563 8303 " " Wick for 66634, obsolete... 66564 8305 Presser Bar Lifter 66565 8304 " Foot Hinge Pin for 66568 66566 " " Plate for 66568 66567 " " Shank for 66568 66568 8304 Presser Foot (hinged) complete, Nos. 66565 to 66567 66569 8307 Rotating Hook for 66570, obsolete, use 66726 66570 Rotating Hook 66569 with 234f, 66584, 66588 and two 50151d, for 66571, obso lete, use 66727 66571 Rotating Hook 66570 with 66573, obso lete, use 66728 66572 8307 Rotating Hook Bobbin Ca.se for 66573, obsolete, use 66729 66573 Rotating Hook Bobbin Case complete for 66571, Nos.591f, 1173d, 50461c, 50462c. 66572,66574,66575 and 66577, obsolete, use 66730 66574 8307 Rotating Hook Bobbin Case Finger for 66573 and 66730 66575 8307 Rotating Hook Bobbin Case Finger Spring for 66573 and 66730 66576 8307 Rotating Hook Bobbin Case Position Plate 66577 8307 " " " '* Tension Spring for 66573 and 66730 66578 8303 Rotating Hook Driving Shaft

From the library of: Superior Sewing Machine & Supply LLC 68 NUMERICAL LIST OF PARTS

NO. PLATE NAME 66579 8303 Rotating Hook Driving Shaft Bushing (back) 66580 8303 Rotating Hook Driving Shaft Bushing (front) 66581 S307 Rotating Hook Driving Shaft Collar with two 50150c 66582 8303 Rotating Hook Driving Shaft Gear (front) with two 1259c, obsolete 66583 8307 Rotating Hook Position Pin for 66585.... 66584 8307 " " Section for 66570, obso lete, use 66731 66585 8307 Rotating Hook Shaft with 66583 66586 8307 " " " Bushing 66587 8307 " " " Gear with two 1253c, obsolete 66588 8307 Rotating Hook Thread Guard for 66570 and 66726 66589 8307 Slack Thread Regulator 66590 8306 Thread Take-up Crank for 66652 66591 8306 " " Lever for 66594 66592 8308 " " " Link for 66594... 66593 8306 " " " " Hinge Pin for 66706 66594 Thread Take-up Lever complete for 66706, Nos. 32543, 66591 and 66592 66595 Thread Take-up Spring Disc for 66596 66596 8308 " " " " 66595 with 56063, for 66660 66597 8304 Throat Plate for 66534 66598 8314 Bobbin Winder Bobbin Position Pin for 66607 and 66671 per 100 66599 8314 Bobbin Winder Frame for 66600, obsolete 66600 8314 " " " 66599 with 66604, for 66627, obsolete 66601 8314 Bobbin Winder Frame Spring for 66627, 66674 and 66691 66602 8314 Bobbin Winder Pulley complete for 66627, Nos. 66605 and 66650, obsolete 66603 Bobbin Winder Pulley Bushing for 66650, obsolete 66604 8314 Bobbin Winder Pulley Cover for 66600, obsolete 66605 8314 Bobbin Winder PuUey Shaft for 66602, obsolete 66606 8314 Bobbin Winder Spindle for 66627, obsolete 66607 8314 " " " CoUar with 50465p and 66598, for 66627, obsolete

From the library of: Superior Sewing Machine & Supply LLC NUMEMCAL LIST OF PARTS 69

NO. PLATE NAME 66608 8314 Bobbin Winder Spool Pin for 66674 and 66691 66609 8314 Bobbin Winder Stop Latch for 66674 and 66691 66610 8314 Bobbin Winder Stop Latch Spring for 66674 and 66691 66611 8314 Bobbin Winder Tension Bracket for 66612, obsolete 66612 Bobbin Winder Tension Bracket complete, Nos. 208b,9544,9545,10106 and 66611, obsolete 66613 8314 Bobbin Winder Tripping Arm for 66627, obsolete 66614 8302 Arm Shaft (horizontal) Gear, obsolete.... 66615 8302 " " " « Clutch, obso lete 66616 8302 Arm Shaft(horizontal) Gear Clutch Spring, obsolete 66617 8302 Arm Shaft (horizontal) Gear Collar with two 457c, obsolete 66627 Bobbin Winder Frame complete, Nos. 190b, 66600 to 66602, 66606, 66607 and 66613, obsolete 66628 8311 Feed Cover Plate for 120285 66629 8307 Oil Reservoir Oil Tube, for oiling 51823 and 66535, for 66634, obsolete 66630 8307 Oil Reservoir Oil Tube, for oiling 66533 and 66578, for 66634, obsolete 66631 8307 Oil Reservoir Oil Tube, for oiling 66537, for 66634, obsolete 66632 8307 Oil Reservoir Oil Tube, for oiling 66554, for 66634, obsolete 66633 8307 Oil Reservoir Oil Tube, for oiling 66554 and 66556, for 66634, obsolete 66634 8303 Oil Reservoir complete, Nos.66562,66563, 66631,66632 and two eac}i 66629,66630, and 66633, obsolete 66635 8302 Arm Shaft (upright) Hole Plug 66637 8301 Balance Wheel with two 448c, obsolete... 66639 8306 Needle Bar Thread Guard 66642 8302 Arm Shaft (horizontal) Bevel Gear (right hand spiral) with two 1259c, obsolete 66643 8301 Arm Shaft (upright) 66644 8302 " " " Gear (lower) with two 1259c, obsolete 66644 8302 Arm Shaft (upright) Gear (upper) with two 1259c, obsolete

From the library of: Superior Sewing Machine & Supply LLC \/ 70 NUMERICAL LIST OF PARTS

NO. PLATE NAME 66644 8302 Rotating Hook Driving Shaft Gear (back) with two 1259c obsolete *66645 Stripper Foot with 8505, for 66649, obso lete 66646 8312 Darning Foot Spring for 66649 and 86294 *66647 Needle Clamp with 66648, for 66649, obsolete *66648 Needle Clamp Sliding Section for 66647, obsolete 66649 8312 Stripper Foot and Needle Clamp com plete, for darning and embroiderj' work, for 120285, Nos. 552c, 66645, 66646, 66666 and 66667, obsolete, use 86294.. 66650 8314 Bobbin Winder Pulley 32645 with 66603 and two 32647, for 66602, obsolete 66651 Needle Bar Connecting Link 66657 with 66659, for 66652 66652 Needle Bar Connecting Link 66651 with 1130e and 66590, for 66706 66656 8302 Arm Spool Pin *66657 8306 Needle Bar Connecting Link with 51002e, for 66651 66659 Arm Shaft (horizontal) Gear Washer, obsolete 66660 Tension complete, Nos. 1560b, 8238, 32572, 50196c, 56057, 56060, 56064, 66596 and two 2102 66661 Arm, upper and lower (solid) with 66506, 66517 and 66518, for 101-2 Machine, obsolete 66665 8326 Bobbin Winder Tripping Arm for 66674 and 66691 66666 Needle Clamp for 66649, obsolete 66667 " " Slide for 66649, obsolete... 66668 8324 Arm Shaft (horizontal) Flanged Bushing (back) for 101-2 and 101-3 Machines... 66669 8324 Bobbin Winder Bracket (belt cover) for 66674 66670 8326 Bobbin Winder Frame for 66674 and 66691 66671 8326 " " Spindle with 66698, for 66674 and 66691 66672 8326 Bobbin Winder Tension Bracket for 66673 66673 Bobbin Winder Tension Bracket complete for 66674 and 66691, Nos. 208d, 9544, 9545, 10106 and 66672

From the library of: Superior Sewing Machine & Supply LLC NUMERICAL LIST OF PARTS 71

NO. PLATE NAME 66674 Bobbin Winder complete for 101-2 and 101-3 Machines, Nos. 190b, 15287, 15288, 50464b, 50466b, 66601, 66609, 66610, 66665 and 66669 to 66671 66675 9152 Arm Shaft (horizontal) Bevel Gear (right hand spiral) with two 1259c 66676 9154 Rotating Hook Driving Shaft Bevel Gear (back) right hand spiral, with two 1259c 66677 9152 Arm Shaft (upright) Bevel Gear (lower) left hand spiral, with two 1259c 66677 9152 Arm Shaft (upright) Bevel Gear (upper) left hand spiral, with two 1259c 66678 9154 Rotating Hook Driving Shaft Bevel Gear (front) left hand spiral, with two 1259c 66679 9154 Rotating Hook Shaft Bevel Gear (right hand spiral) with two 1253c *66683 Arm, upper and lower (solid) with 66506, 66517, 66518 and 66689 (aluminum) for 101-10 Machine, obsolete 66684 9153 Arm Shaft (horizontal) Flanged Bushing (back) with 66685(aluminum) for 101-10 and 101-11 Machines *66685 Arm Shaft (horizontal) Flanged Bushing (back) Sleeve for 66684 66687 Cloth Plate (aluminum) for 66688 66688 Cloth Plate complete for 101-10 and 101-11 Machines, Nos. 66525 and 66687 *66689 9154 Presser Bar Bushing (lower) for 66683 and 66724 66690 9153 Bobbin Winder Bracket (belt cover) aluminum, for 66691 66691 Bobbin Winder complete for 101-10 and 101-11 Machines, Nos. 190b, 15287, 15288, 50464b, 50466b, 66601, 66609, 66610, 66665, 66670, 66671 and 66690.. 66692 9151 Arm Shaft (horizontal) 66693 9152 " " " Clamp Stop Motion Collar with two 791c 66695 9152 Arm Shaft(horizontal) Gear Collar Retain ing Spring for 66716 66696 9153 Balance Wheel with two 448c 66700 9152 Clamp Stop Motion Washer (balance wheel) thick 66701 9152 Clamp Stop Motion Washer (balance wheel) thin 66702 9152 Clamp Stop Motion Washer (shaft) thick 66703 9152 " " " " " thin

From the library of: Superior Sewing Machine & Supply LLC 72 NUMERICAL LIST OF PARTS

NO. PLATE NAME •66704 Face Plate for 66527, obsolete 66705 9152 Needle Bar with 32519 66706 Thread Take-up Lever 66594 with 66593 and 66652 66707 9154 Slack Thread Regulator Screw Washer.... 66708 9152 Arm Shaft (horizontal) Gear for 66716.... 66709 9152 " « " " Clutch for 66716 66710 9152 Arm Shaft(horizontal) Gear Clutch Spring for 66716 66711 9152 Arm Shaft (horizontal) Gear Clutch Collar with 66714, for 66716 66712 9152 Arm Shaft (horizontal) Gear Collar with two 624o, for 66716 66713 9152 Arm Shaft (horizontal) Gear Spring for 66716 66714 9152 Arm Shaft (horizontal) Gear Spring Pin for 66711 66715 9153 Clamp Stop Motion Bushing for 66716 66716 " " " " 66715 with 66695,66708 to 66713,66717 and 190540 66717 9152 Arm Shaft (horizontal) Gear Clutch Collar WaHsher for 66716 66718 9153 Oil Reservoir for 66719 66719 Oil Reservoir complete, Nos. 66718 and 66721 66720 9154 Oil Reservoir Screw Bushing 66721 " " Wick for 66719 66722 Face Plate for 66723 66723 9153 " « 66722 with 2827 *66724 Arm, upper and lower (solid) with 66506, 66517, 66518 and 66689 (aluminum) for 101-11 Machine *66725 Arm, upper and lower (solid) with 66506, 66517 and 66518, for 101-3 Machine... 66726 9154 Rotating Hook with 234f and 66588, for 66727 and 66728 66727 Rotating Hook complete, Nos. 66726, 66731 and two 50151d 66728 Rotating Hook and Bobbin Case complete, Nos. 66726, 66730, 66731 and two 50151d 66729 9154 Rotating Hook Bobbin Case for 66730 66730 Rotating Hook Bobbin Case complete for 66728, Nos. 591f, 1173d, 50461c, 50462c,66574,66575,66577 and 66729..

From the library of: Superior Sewing Machine & Supply LLC NUMERICAL LIST OF PARTS 73

NO. PLATE NAME 66731 9154 Rotating Hook Section for 66727 and 66728 67116 8329 Lead Bushing (rubber) for 190963, obso lete 67374 8197 Controller Lead Cord Clamp for 192307.. •86291 Darning Foot for 86294 86294 9155 Darning Foot(spring) complete for 120285, Nos. S. S. 476c, 36658, 66646, 86291, 86295 and 86296 *86295 Darning Foot Clamp Body for 86294 •86296 " " " Guide for 86294.... 87427 9157 Cover Lock Plate for Portable Case Set No. 204 87572 9155 Machine Hinge Head Screw Washer for 87723 87721 4924 Machine Hinge Connection for 87723... 87722 4924 " Head for 87723 87723 Machine Hinge complete for Portable Case Set No. 203 and Portable Case Set No. 204, Nos. S. S. 368J, 8295, 87572, 87721 and 87722 87724 9157 Cover Reinforcing Plate for 124309 120285 Attachment Set for 120315, Nos. 287b, 25527b, 25537, 35931, 36583, 36594, 66628, 86294, 120378, five 32522 and six needles 120290 8313 Ruffler for 120315 and 120399 120315 Attachment Set complete, Nos. 120285 and 120290 120318 8312 Hemmer (foot) in. hem 120319 8312 Quilter (Attachments) 120348 9156 Under Braider (Attachments) 120363 9155 Presser Foot, for gathering 120378 9155 Screw Driver (hook tension) for 120285.. 120399 Ruffler 120290 with 120400 120400 9156 " Shirring Plate for 120399 120518 Hemmer (foot) in. hem 120566 " " ^ in. hem 124307 4924 Handle Link for 124308 124308 " 124307 with 28229 and 50549b, for 124309 124309 Handle complete for Portable Case Set No. 203 and Portable Case Set No. 204, Nos. 28088, 28231, 87724 and two each N. N.83J and 124308

From the library of: Superior Sewing Machine & Supply LLC 74 NUMERICAL LIST OF PARTS

NO. PLATE NAME 124318 4387 Knee Lever Support Bracket (left) with 56493 and two wood screws % in. No. 3 R. H. B., for Portable Case Set No. 203 and Portable Case Set No. 204 124319 8316 Tilting Centre Drawer Stop for Library Cabinet Table Set No. 19, obsolete 124325 8322 Machine Lifting Plate for 124328, obsolete 124326 8328 " " " Plunger for 124328, obsolete 124327 8328 Machine Lifting Plate Plunger Spring for 124328, obsolete 124328 Machine Lifting Plate 124325 with 50061J, 124326 and 124327,for 124329, obsolete, use 124348 124329 Machine Lifting Plate 124328 with 28123 and 56262, for 124330, obsolete, use 124349 124330 Machine Lifting Plate complete for Library Cabinet Table Set No. 19, Nos. 9281, 50251e, 56260, 56261 and 124329, obso lete, use 124350 *124338 Table Leaf (left) Rest Rod for 124339 124339 8322 Table Leaf (left) Rest Rod complete, for Library Cabinet Table Set No. 19 and Library Cabinet Talde Set No. 40, Nos. 50444E, 124338, 124340 and 124341.... 124340 8328 Table Leaf (left) Rest Rod Cushion (felt) for 124339 *124341 Table Leaf (left) Rest Rod Cushion Holder for 124339 124343 9157 Stretcher Board .'\ngle Plate with five blued wood screws % in. No. 7, for Library Cabinet Table Set No. 19, ob solete 124344 9151 Machine Lifting Plate for 124348, obsolete 124345 9158 " " " Plunger for 124348, obsolete 124346 9158 Machine Lifting Plate Plunger Spring for 12434S, obsolete 124347 9158 Machine Lifting Plate Plunger Spring Stop Pin Cap for 124348, obsolete 124348 Machine Lifting Plate 124344 with 9320 and 124345 to 124347, for 124349, ob solete 124349 Machine Lifting Plate 124348 with 28123 and 56262, for 124350, obsolete

From the library of: Superior Sewing Machine & Supply LLC NUMERICAL LIST OF PARTS 75

NO. PLATE 'NAME 124350 Machine Lifting Plate complete for Library Cabinet Table Set No. 19, Nos. 9281, 50251E, 56260, 56261 and 124349, ob solete 124351 Shield Chain 124412 with 124352 and wood screw H i"* No. 5 R. H. B., for Library Cabinet Table Set No. 19 and Library Cabinet Table Set No. 40 124352 Shield Chain Hook for 124351 124353 9157 Bottom Rail Support Bracket with two each 5^ in. No. 7 and % in. No. 7 blued wood screws, for Library Cabinet Table Set No. 19, obsolete 124354 9157 Oil Can Holder with two wood screws % in. No. 5 R. H. B., for Portable Case Set No. 203 and Portable Case Set No. 204 124355 9151 Attachment Box Holder with two wood screws Yz in. No.5 R.H. B., for Portable Case Set No. 203 and Portable Case Set No. 204 124358 9157 Knee Lifter Support Bracket (right) with 56493 and two wood screws y% in. No. 3 R. H. B., for Portable Case Set No. 203 and Portable Case Set No. 204— 124360 9157 Attachment Till Cover for 124361,obsolete 124361 Attachment Till Cover complete for Port able Case Set No. 203, Nos. 124360, 124362,124363 and two 124364,obsolete 124362 4924 Attachment Till Cover Latch for 124361, obsolete 124363 4924 Attachment Till Cover Latch Button for 124361, obsolete 124364 4924 Attachment Till Cover Latch Button Washer for 124361, obsolete 124367 9158 Hasp Button for 124368, obsolete 124368 Hasp Button complete for Portable Case Set No. 203, Nos. 124367, 124369 to 124371 and two nickel-plated wood screws i®* No. 4, obsolete 124369 9158 Hasp Button Plate for 124368, obsolete... 124370 9158 " " Spring for 124368, obsolete.. 124371 9158 " " " Washer for 124368, obsolete 124378 9158 Cover Position Stud for 124379, obsolete.. 124379 9158 " " " Plate with 124378,for Portable Case Set No. 203, obsolete...

From the library of: Superior Sewing Machine & Supply LLC 76 NUMERICAL LIST OF PARTS

NO. PLATE NAME 124380 9158 Cover Position Plate for Portable Case Set No. 203, obsolete 124387 4924 Machine Button for 124388 124388 " " 124387 with 56493, for 124389 124389 Machine Button 124388 with 22436r and 124411, for Portable Case Set No. 203 and Portable Case Set No. 204 124390 4924 Machine Button Thumb Screw Bushing for 124411 124411 Machine Button Thumb Screw Bushing 124390 with 732b, for 124389 124412 Shield Chain, 5J^ in. long, for 124351.... 124419 Hasp for 124420, obsolete 124420 9157 Hasp complete for Portable Case Set No. 203, Nos. 1792J,50702b, 124419,124421 and 124422, obsolete 124421 Hasp Plate for 124420, obsolete 124422 9158 " Spring for 124420, obsolete 124428 9158 Cover Lock Key for Portable Case Set No. 204 124428 9158 Drawer Lock Key for Electric Combina tion Table Set No. 304 124428 9158 TiltingCentreDrawerLockKeyforLibrary Cabinet Table Set No. 40 124429 9157 Cover Lock for Portable Case Set No. 204 124434 9157 Corner Brace for Library Cabinet Table Set No. 40 and Electric Combination Table Set No. 304 124435 9157 Cover Bar Bolt Nut Washer for Electric Combination Table Set No. 304 124436 9157 Cover Bar Bolt Retaining Washer for Electric Combination Table Set No. 304 124437 9157 Cover Bar Lock for Electric Combination Table Set No. 304 124438 9157 Cover Position Plate for Electric Com bination Table Set No. 304 124447 9151 Machine Rest for Electric Combination Table Set No. 304 124448 9158 Tilting Centre Drawer Stop for Library Cabinet Table Set No. 40 124449 9151 Counterbalance Spring Bracket for 124451 124450 9151 Machine Lifting Plate for 124451 124451 " " " 124450 with 28123 and 124449, for 124452

From the library of: Superior Sewing Machine & Supply LLC NUMERICAL LIST OF PARTS 77

NO. PLATE NAME 124452 Machine Lifting Plate complete for Library Cabinet Table Set No. 40, Nos. 9281, 50251E, 56260, 56261 and 124451 124453 9157 Oil Can ]^taining Plate for Library Cab inet Table Set No. 40 124456 9157 Shield Stop for Library Cabinet Table Set No. 40 124458 9158 Tilting Centre Drawer Hinge for Library Cabinet Table Set No. 40 124484 Table Leaf (left) Hinge for Library Cab inet Table Set No. 19 and Librarj' Cab inet Table Set No. 40 124492 9157 Leg Socket for Libraiy Cabinet Table Set No. 19, Library Cabinet Table Set No. 40 and Electric Combination Table Set No. 304 124493 9158 Machine Hinge Connection for 124494... 124494 Machine Hinge complete for Library Cab inet Table Set No. 19 and Library Cab inet Table Set No.40, Nos. 2809,15263, 124493 and wood screws in. No. 10.. 190070 8323 Lead Bushing (rubber) for 190836, ob solete 190079 8325 Brush Holder Tube for 190679, obsolete.. 190083 8325 " " Spring for 190879, obsolete 190294 8324 Controller Resistance Unit for 190878, obsolete 190295 Controller Resistance Unit for 190878, obsolete 190297 Controller Resistance Unit for 190881, obsolete 190299 Controller Resistance Unit for 190882, obsolete 190355 8323 Lead Plug, for lamp socket, obsolete, use 192540 190399 8329 Controller Rock Shaft Centre (back) for 190829, obsolete 190439 8311 Tube, filled with Singer Motor Lubricant, for. 190613 190479 8327 Field Core for S. E. Motors, obsolete •190484 8329 Connecting Plug Insulation Washer for 190658 and 190838 *190484 8329 Lead Connecting Plug Insulation Washer (fibre) for 190659 *190.500 8327 Field CoU (upper) for 192696, 192701, 192706 and 192716, obsolete *190501 8327 Field CoU (lower) for 192696, obsolete...

From the library of: Superior Sewing Machine & Supply LLC 78 NUMERICAL LIST OF PARTS

NO. PLATE NAME *190502 Field Coil (upper) for 192697, 192702, 192707 and 192724, obsolete *190503 Field Coil (lower) for 192697, obsolete... •190506 " " (upper) for 192698, 192704, 192709 and 192722, obsolete *190507 Field Coil (lower) for 192698, obsolete... *190510 " " (upper) for 192699, 192705, 192710, 192715 and 192723, obsolete... *190511 Field Coil (lower) for 192699, obsolete... 190512 .Armature Core complete 190529 Grease Cup complete, Nos. 190530 and 190533 190530 8325 Grease Cup Body for 190529 190.531 8325 " " Wick for 190533 190532 8.325 " " " Spring for 190533 190533 8325 " " •' 190531 with 190532, for 190529 190535 8325 Armature Slmft Bearing Sleeve (front) for S. E. Motors, obsolete 190536 8325 Armature Shaft Bearing Sleeve (front) Plug for S. E. Motors, obsolete 190537 8325 Armature Shaft Bearing Sleeve (back) for 190680 and 192455 190538 8325 Motor Frame Grease Well Plug for 190680 and 192455 190539 8325 Motor Cover Pin for 190680 and 192455.. 190540 8325 Armature Shaft Gear with two 50150c, for 66716 190541 8327 Motor Cover 190543 8327 Lead Wire Tube 190544 with 190545 and 190720, for S. E. Motors, obsolete 190544 8327 Lead Wire Tube (circular loom)for 190543, obsolete 190545 8327 Lead Wire Tube Ferrule (upper) for 190543 and 192080 *190552 8329 Connecting Plug Ferrule for 190658 *190552 8329 Lead Connecting Plug Ferrule for 190659 *190553 8329 Connecting Plug Insert Screw Washer for 190658 and 190838 *190553 8329 I«ad Connecting Plug Insert Screw Washer for 190659 *190553 8329 Iiead Plug Insert Screw Washer for 190851, obsolete 190553 8329 Terminal Block Wire Clamp Screw Washer for 190867 and 191176, obsolete

From the library of: Superior Sewing Machine & Supply LLC NUMERICAL LIST OF PARTS 79

NO. PLATE NAME 190598 8329 Controller Resistance Unit Screw Washer (fibre) for 101-2 and 101-10 Machines, obsolete 190607 8329 Controller Rock Shaft Centre (front) for Library Cabinet Table Set No. 19, obsolete 190608 8329 ControllerResistanceUnit Cushion Washer (leather) for 101-2 and 101-10 Machines, obsolete 190612 Tube Carton (paper) for 190613 190613 " 190439 with 190612 (Accessories).. 190614 8325 Field Coil Retainer for S. E. Motors, obsolete ■"190615 8329 Connecting Plug Insert (moulded) for 190838, obsolete ■*190615 8329 Lead Connecting Plug Insert (moulded) for 190659 *190616 8329 Connecting Plug Insert (moulded) for 190658, obsolete 190658 8323 Connecting Plug (male half) Nos. 50520, 190484, 190552, 190553 and 190616, for 190836, obsolete 190659 Lead Connecting Plug (female half) Nos. 50520, 190484, 190552, 190553 and 190615, for 190984 190660 8325 Terminal complete for S. E. Motors, ob solete 190663 8327 Motor Frame for 190680, obsolete 190664 8327 Commutator 190668 8325 Brush Holder Insulating Bushing for 190679, obsolete 190669 8327 Armature complete for S. E. 607, S. E. 617, S. E. 627, S. E. 647, S. E. 657, S. E. 677 and S. E. 687 Motors, obsolete 190670 Armature complete for S. E. 608, S. E. 618, S. E. 628, S. E. 648, S. E. 658 and S. E. 665 Motors, obsolete 190672 Armature complete for S. E. 610, S. E. 612, S. E. 620 to S. E. 622, S. E. 630, S. E. 632, S. E. 650, S. E. 652, S. E. 660, S. E. 662, S. E. 680 and S. E. 690 Motors, obsolete 190677 Controller Resistance Unit for 190883, obsolete 190679 Brush Holder complete for S. E. Motors, Nos. 50596R, 190079, 190083, 190868 and 190782, obsolete

From the library of: Superior Sewing Machine & Supply LLC 80 NUMERICAL LIST OF PARTS

NO. PLATE NAME 190680 Motor Frame comi)lete for S. E. Motors, Nos. 457c, 190537, 190663, 191370 and two each 440c, 45Sc, 190538 and 190539, obsolete 190720 8327 Lead Wire Tube Ferrule (lower) for 190543 and 192080 190735 Armature complete for S. E. 613 and S. U. 603 Motors, •190736 Field Coil (upper) for 192700, obsolete •190737 " " (lower) for 192700, obsolete 190744 9161 Singerlight Lamp 190745 9161 " Shade for 192099, 192156 and 192537 190750 8324 Terminal Block (lower half) for 191002 and 191178, obsolete 190751 8324 Terminal Block (upper half) for 190867, obsolete 190757 9162 Singerlight Lead Tube (lead) for 192537, obsolete 190782 8325 Brush (carbon) for 190679, ob.solete *190801 Field Coil (lower) for 192705, obsolete... •190808 " " " 192701, obsolete... •190809 " " " " 192704, obsolete... •190810 " " " " 192702, obsolete... 190822 Controller Resistance Unit for 190880, obsolete 190825 8329 ConnectingPlug Holder(upper) forLibrary Cabinet Table Set No. 19, obsolete.... 190826 8329 Connecting Plug Holder(lower) for Library Cabinet Table Set No. 19, obsolete.... 190827 Controller Rock Shaft for 190828, obsolete 190828 Controller Rock Shaft complete forLibrary Cabinet Table Set No. 19, Nos. 41c, 190827 and 190831, obsolete, use 191122 190829 8324 Controller Rock Shaft Centre (back) Bracket with 190399 and three wood screws ^ in. No.7, for Library Cabinet Table Set No. 19, obsolete 190830 8324 Controller Rock Shaft Centre (front) Bracket with 1497r and three wood screws H in. No.7, for Library Cabinet Table Set No. 19, obsolete 190831 Controller Rock Shaft Knee Plate for 190828, obsolete 190832 8329 Controller Rock Shaft Spring Stud for 190834, obsolete

From the library of: Superior Sewing Machine & Supply LLC NUMERICAL LIST OF PARTS 81

NO. PLATK NAME 190833 8329 Controller Rock Shaft Spring Stud Plate for 190834, oh.solete 190834 Controller Rock Shaft Spring Stud Plate 190833 with 190S32, for Library Cabinet Table Set No. 19, obsolete 190835 8329 Lead Clamping Plate for Library Cabinet Table Set No. 19, ob.solete 190836 8323 Lead complete, from machine to table, for Library Cabinet Table Set No. 19, Nos. 190070, 190837 and two each 190658 and 190838, obsolete 190837 Cable for 190830, obsolete 190838 8323 Connecting Plug (female half) Nos. .50520. 190484, 190553, 190615 and 190839, for 190830, ob.solete "190839 8329 Connecting Plug Ferrule for 190838, obsolete 190840 8329 Terminal Block Pin (male) i)ra.<.'5, for 191002, ol).solete 190841 Lead Plug Insert (brass) 190842 with 190843, for 190851 190842 8329 Lead Plug In.sert (brass) for 190841 190843 8329 " " " Stop Pin for 190841 190844 8329 Terminal Block Connecting Plate (brasS/ for 191002 and 191178, obsolete 190845 9159 Terminal Block Angle Pin (male) 190846 with 190847, for 191178, obsolete 190846 9159 Terminal Block Angle Pin (male) bras.s. for 190845, obsolete .190847 9159 Terminal Block Angle Pin (male) Seat (brass) for 190845, obsolete 190851 8323 Load Plug complete (2 pin female) two each 50520, 190553, 190841. 190852 and three each 1768 ami 50567, for 190900 190852 Lead Plug for 190851 190867 Terminal Block complete for 101-2 Ma chine, Nos. 190751, 191002 and six each 50520 and 190553, obsolete 190869 8324 Controller Box Side Cover for 101-2 and 101-10 Machines, obsolete 190870 8325 Controller Resistance Unit Contact Lever Driver with 190874, for 101-2 and 101-10 Machino.s, obsolete 190871 8324 Controller Resistance Unit Contact Lever Driver Connecting Rod for 101-2 and 101-10 Machines, obsolete

From the library of: Superior Sewing Machine & Supply LLC 82 NUMERICAL LIST OF PARTS

NO. PLATE NAME 190872 8325 Controller Resistance Unit Contact Lever Driver Spring Stud for 190873, obsolete 190873 8325 Controller Resistance Unit Contact Lever Driver Spring Stud Bracket with 190872, for 101-2 and 101-10 Machines, obsolete 190874 8325 Controller Resistance Unit Contact Lever Driver Stud for 190870, obsolete 190878 8324 Controller Resistance Unit complete, for 100 to 110 volts, C. or D. C. Motor, for 101-2 and. 101-10 Machines, Nos. 190295, 190884 and 191144, obsolete... 190879 Controller Resistance Unit complete, for 115 to 125 volts, A. C. or D. C. Motor, for 101-2 and 101-10 Machines, Nos. 190884, 191144 and 191769, obsolete... 190880 Controller Resistance Unit complete, for 150 to 165 volts, A. C. or D. C. Motor, for 101-2 and 101-10 Machines, Nos. 190884, 191144 and 191768, obsolete... 190881 Controller Resistance Unit complete, for 200 to 220 volts, A. C. or D. C. Motor, for 101-2 and 101-10 Machines, Nos. 190884,191144and 191767, obsolete.... 190882 Controller Resistance Unit complete, for 230 to 250 volts, A. C. or D. C. Motor, for 101-2 and 101-10 Machines, Nos. 190884, 191144 and 191770, obsolete... 190883 Controller Resistance Unit complete, for 32 volts, D. C. Motor, for 101-2 and 101-10 Machines, Nos. 190677, 190884 and 191144, obsolete 190884 8324 Controller Resistance Unit Contact Lever complete for 190878 to 190883 and 191111, obsolete 190899 8324 Terminal Block Insulator (black fibre) for 101-2 and 101-10 Machines, obsolete 190900 8323 Lead complete, from stand to lamp socket, for Library Cabinet Table Set No. 19, Nos. 190851, 190901 and 192540, ob solete 190901 Lead Wire, 8 ft. 4 in. long, for 190900, obsolete 190902 8324 Lead (long) from resistance unit to ter minal block, for 190963, obsolete 190903 8324 Lead (short) from resistance unit to ter minal block, for 190963, obsolete

From the library of: Superior Sewing Machine & Supply LLC NUMERICAL LIST OF PARTS 83

NO. PLATE NAME 190904 8323 Lead Wire, 19 in. long, from motor to ter minal block 190936 8329 Controller Resistance Unit Contact Lever Driver Spring for 101-2 and 101-10 Machines, obsolete •190952 Field Coil (upper) for 192712, obsolete... •190953 " " (lower) for 192712, obsolete... 190954 Armature complete for S. E. 619, S. E.629, S. E. 649 and S. E. 659 Motors, obsolete ♦190955 Field Coil (upper) for 192703, 192708, 192718 and 192725, obsolete "190956 Field Coil (lower) for 192703, obsolete... 190962 8323 Lead Wire, 21K in. long, from motor to terminal block.'. 190963 Leads complete, from resistance unit to terminal block, for 101-2 and 101-10 Ma chines, Xos. 67116, 190902 and 190903, obsolete 190984 Leads complete, from lamp socket to twin terminal block, for Library Cabinet Table Set No. 40, and from lamp socket to motor and controller, for Portable Case Set No. 204, Nos. 190985, 192540 and two 190659

190985 Lead for 190984 "191000 Field Coil (upper) for 192711, obsolete... "191001 " " (lower) for 192711, obsolete... 191002 Terminal Block (lower, half) 190750 with 190844, two 190840 and three 50568, for 190867, obsolete "191061 Field Coil (upper) for 192719 and 192721, obsolete "191062 Field Coil (lower) for 192719, obsolete.. . "191063 " " (upper) for 192720, obsolete... •191064 " " (lower) for 192720, obsolete... 191082 8197 Singerlight Nipple Collar Washer (steel) for 192099, 192156 and 192537 191096 8329 Controller Rock Shaft Spring for Library Cabinet Table Set No. 19, obsolete.... •191099 Field Coil (lower) for 192718, obsolete... 191108 Controller Resistance Unit for 191111, obsolete 191108 Armature complete for S. E. 624 Motor, obsolete "191109 Field Coil (upper) for 192717, obsolete... "191110 " " (lower) for 192717, obsolete...

From the library of: Superior Sewing Machine & Supply LLC S4 NUMERICAL LIST OF PARTS

NO. PLATE NAME 191111 Controller Resistance Unit complete, for 50 volts, A. C. or D. C. Motor, for 101-2 and 101-10 Macliiiie.s, Nos. 190884, 191144 and 191771, obsolete 191116 8325 Controller Resistance Unit Contact Lever Driver iSpring for 101-2 and 101-10 Machines, obsolete 191117 8325 Controller Resistance Unit Contact Lever Driver Spring Sleevcfor 101-2 and 101-10 Machines, obsolete •191118 Field Coil (upper) for 192713, obsolete... •191119 " " (lower) for 192713, obsolete.. •191120 " " " " 19270(5, obsolete... 191121 8322 Controller Rock Shaft for 191122, obsolete 191122 Controller Rock Shaft complete for Library Cabinet Table Set No. 19, Nos. 50583c, 191121 and 191123, ol)soiete 191123 8322 Controller Rock Shaft Knee Plate for 191122, obsolete 191123 8322 Knee Plate for 192394 •191128 Field Coil (lower) for 192710, obsolete... 191144 Controller Resistance Unit Name Plate for 190878 to 190883-and 191111, ob solete •191159 Field Coil (lower) for 192716, obsolete... 191176 Terminal Block coinjjlete for 101-10 Ma chine, Nos. 191177, 191178 and six each 50520 and 190553, obsolete 191177 9160 Terminal Block (upper half) for 191176, obsolete 191178 Terminal Block (lower half) 190750 with 190844, two 190845 and three 50568, for 191176, obsolete •191181 Field Coil (lower) for 192721, obsolete... •191217 " " (upper) for 192714, obsolete... •191218 " " (lower) for 192714, obsolete... *191235 " " " " 192722, obsolete... 191278 9163 Controller Resistance Unit Driver Actu ating Collar with 50200c, for 192353 to 192355 •191290 Knee Lever Socket for 192082 •191291 Field Coil (lower) for 192723, obsolete... *191318 " " " " 192724, obsolete... 191370 9159 Armature Shaft Bearing Sleeve (front) for 190680 and 192455 •191371 Field Coil (lower) for 192725, obsolete...

From the library of: Superior Sewing Machine & Supply LLC NUMERICAL LIST OF PARTS 85

NO. PLATE NAME •191375 9163 SinnPi'light Toggle Socket Base complete for 191962, Nos. 191376 and 191377... 191376 Singcrlight Toggle Socket Base Shell for 191375 •191377 Siiigerlight Toggle Socket Base Hub for 191375 •191381 9163 Singcriight Toggle Socket Base Insulation for 191962 •191394 Field Coil (lower) for 192707, obsolete... 191410 9159 Controller Resistance Unit Screw Washer (fibre) for 101-2 and 101-10 Machines, obsolete 191512 9159 Brush Holder Cap for S. U. Motors 191703 9159 Controller Resistance Unit Base Screw Washer for Portable Case Set No. 204.. 191767 Controller Resistance Unit for 190881, obsolete 191768 Controller Resistance Unit for 190880, obsolete 191769 Controller Resistance Unit for 190879, obsolete 191770 Controller Resistance Unit for 190882, obsolete 191771 • Controller Resistance Unit for 191111, obsolete 191773 9161 Singcriight Elbow with two 620c, for 192099, 192156 and 192537 191774 Singcriight Nipple Collar for 191792 191775 9159 " Elbow Nipple for 192099, 192156 and 192537 191778 Singcriight Lead Wire for 192537, obsolete •191785 8190 Singcriight Nipple Collar Washer (felt) H in., for 192099, 192156 and 192537.. *191786 8190 Singcriight Nipple Collar Washer (felt) 5^ in., for 192099, 192156 and 192537.. 191792 9159 Singcriight Nipple Collar 191774 with 2523, for 192099, 192156 and 192537... •191837 Field Coil (lower) for 192709, obsolete... •191870 " " " " 192708, obsolete.... •191871 " " " " 192716, obsolete... 191926 8190 Twin Terminal complete for Portable Case Set No. 204, No. 191957 and two each 191928 and wood screws 1 in. No. 6 Rd. Hd. 0. and A 191928 8190 Twin Terminal Nut with 191929, for 191926 191929 8190 Twin Terminal Nut Insert for 191928....

From the library of: Superior Sewing Machine & Supply LLC 86 NUMERICAL LIST OF PARTS

NO. PLATE NAME 191930 8190 Single Terminal complete for Lil>niry Cab inet Table Set No.40 and Portal)le Case Set No. 204, Nos. 51523, 191956 and two wood screws in. No. 6 Rd. Hd. 0. and A 191932 8197 Twin Terminal Block for 191934 191933 8197 " " Post for 191934 191934 8197 Twin Terminal complete for Library Cab inet Table Set No. 40, No. 191932 and two each 1785, 51523, 191933 and wood screws IH in. No. 12 Rd. Hd. 0. and A. 191937 Screw Eye 19193S with 191939,for Library Cabinet Table Set No. 40 191938 9159 Screw Eye for 191937 191939 9159 " " Insulation (rubber) for 191937 191953 9163 Lead Bushing for Portable Case Set No. 204 191956 8190 Single Terminal Block (moulded) with 191958, for 191930 191957 8190 Twin Terminal Block (moulded) with two 191958, for 191926 191958 Single Terminal Insert for 191956 191958 Twin Terminal Insert for 191957 191959 Single Terminal Thumb Nut Insert for 51523 191959 Twin Terminal Post Thumb Nut Insert for 51523 *191960 Controller Lead Terminal Clip Body for 192151, 192356 and 192358 *191960 Field Coil Lead Terminal Clip Body *191960 Singerlight Lead Terminal Clip Body for 192158 and 192159 ".... *191960 Singerlight Lead Wire Terminal Clip Body for 192102 *191961 Controller Lead Terminal Clip Body Cap for 192151, 192356 and 192358 *191961 Field Coil Lead Terminal Clip Body Cap *191961 Singerlight Lead Terminal Clip Body Cap for 192158 and 192159 *191961 -- - Singerlight Lead Wire Terminal Clip Body Cap for 192102 191962 Singerlight Toggle Socket complete for 192099,192156 and 192537, Nos. 50564j, 191375, 191381 and 191963 to 191965.. *191963 8102 Singerlight Toggle Socket Shell for 191962 •191964 8102 " " " " Insulation for 191962

From the library of: Superior Sewing Machine & Supply LLC NUMERICAL LIST OF PARTS 87

NO. PLATE NAME 191965 8102 Singerlight Toggle Socket Internal Fitting complete for 191962 *192066 Field Coil (upper) for 192726, obsolete... •192067 " " (lower) for 192726, ob-solete... 192080 9160 Lead Wire Tube complete for S. U. Motors, Nos. 190545, 190720 and 192081 192081 9160 Lead Wire Tube (circular loom) for 192080 192082 9151 Knee Lever with 191290 and two 7958 (aluminum) for Portable Case Set No. 204 192083 9161 Twin Terminal Cover for Portable Case Set No. 204 192099 9162 Singerlight (flexible, les.s lamp) complete for 101-11 Machine, Nos. 190745, 191082,191773,191775,191792,191962, 192101, 701304 and two each 191785, 191786 and 192102 192101 9162 Singerlight Lead Tube (lead) for 192099 and 192156 192102 Singerlight Lead Wire comiflote for 192099, Nos. 191960, 191961 and 192103 192103 Singerlight Lead Wire for 192102 192140 9161 Controller Resistance Unit, for 9.5 to 145 volts, for 192216 and 192354 192141 9161 Controller Resistance Unit, for 150 to 250 volts, for 192217 and 192355 192143 9163 Lead Hole Plug Retaining Spring for 192144 (Accessories) 192144 9163 Lead Hole Plug for 101-3 Machine, for Library Cabinet Table Set No. 40 (Accessories) 192145 Controller Resistance Unit Plate for 192279 192149 9161 Controller Re.sistance Unit Driver for 192273 192151 9162 Controller Lead complete for 192215 to 192217, No. 192152 and four each 191960 and 191961 192152 Controller Lead for 192151 192156 9162 Singerlight (flexible, leiw lamp) complete for 101-3 Machine, Nos. 190745,191082, 191773,191775,191792,191962,192101, 192158, 192159, 701304 and two each 191785 and 191786 192158 Singerlight Lead (long) complete for 192156, Nos. 191960,191961 and 192160

From the library of: Superior Sewing Machine & Supply LLC 88 NUMERICAL LIST OF PARTS

NO. PL.^TE NAME 192159 Singerlight Lead (short) complete for 192156, Nos. 191960,191961 and 192161 192160 Singerlight Lead, 29 in. long, for 1921.58... 192161 " 28 in. long, for 192159... 192211 9161 Controller Resistance Unit, for 32 to 55 volts, for 192215 and 192353 192215 Contrcjllor complete, for 32 to 55 volts, A. C. or D. C. Motor, for Lilmiry Cab inet Tal)le Set No. 40, Nos. 51007i), 192151,192211,192273,192274,192279, 192298,192299,192302,192304,192305, 899279, two each 23258, 50231.1, 50939r, 701690 and four wood screws Yi In. No. 7 Ild. Hd. 0. and A 192216 Controller complete, for 95 to 145 volts, A. C. or D. C. Motor, for Library Cab inet Table Set No. 40, Nos. 51007i), 192140,192151.192273, 192274,192279, 192298,192299,192302,192304,192305, S99279, two each 23258, 50231.1, 50939u, 701690 and four wood screws Yi in. No. 7 Rd. Ild. 0. and A 192217 Controller complete, for 150 to 250 volts, A. C. or D. C. Motor, for Library Cab inet Table Set No. 40, Nos. 51007d, 192141,192151,192273,192274,102279, 192298,192299,192302,192304,192305, 899279, two each 23258, 50231.1, 50939k, 701690 and four wood screws Yi i't- No. 7 Rd. Hd. 0. and A 192260 9161 Controller Resistance Unit Base 192270 with 192335 and 192336, for 192279 and 192353 to 192355 192270 Controller Resistance Unit Base with 192272, for 192269 102272 8197 Controller Resistance Unit Driver Spring Guide Pin for 192270 192273 9161 Controller Resistance Unit Driver com plete for 192215 to 192217 and 192353 to 192355, Nos. 192149 and 192308.... 192274 8197 Controller Resistance Unit Driver Sj)ring for 192215 to 192217 and 192353 to 192355 192279 Controller Resistance Unit Base 192269 with 192145 and four 192280, for 192215 to 192217

From the library of: Superior Sewing Machine & Supply LLC NUMERICAL LIST OF PARTS 89

NO. PLATE NAME 192280 8197 Controller Resistance Unit Plate Rivet for 192279..-. 192298 9160 Controller Resistance Unit Cover for 192215 to 192217 192299 9160 Controller Resistance Unit Cover Insula tion (paper) for 192215 to 192217 192302 9159 ControllerRcsistanceUnit Operating Screw Adjusting Nut (insulating) with 192303, for 192215 to 192217 and 192353 to 192355 192303 Controller ResistanccUnitOpcratingScrcw Adjusting Nut Insert (brass) for 192302 192304 8197 Controller ResistaneeUnitOperatingScrew Locking Washer for 192215 to 192217 and 192353 to 192355 192305 8197 ControUerResistaneeUnitOperatingLcver with 192306, for 192215 to 192217 and 192353 to 192355 192306 8197 ControllerResistanccUnitOperatingScrew Locking Washer Position Pin for 192305 192307 Controller Lead Cord Clamp complete for Library Calhnet Table Set No. 40, two 67374and wood screw ^in. No.9R.H.B. 192308 9161 Controller Resistance Unit Driver Shaft for 192273 *192335 Controller Resistance Unit Driver Shaft Bushing for 192269 *192336 Controller Resistance Unit Driver Shaft Bushing Flange for 192269 192353 Controller complete, for 32 to 55 volts, A. C. or D. C. Motor, for Portable Case Set No. 204, Nos. 51007d, 191278, 192211,192269,192273,192274,192302, 192304, 192305, 192356, 19235S, 899279 and two each 23258, 50939e and 701690 192354 Controller complete, for 95 to 145 volts, A. C. or D. C. Motor, for Portalde Case Set No. 204, Nos. 51007d, 191278, 192140,192269,192273,192274,192302, 192304,192305, 192356,192358,899279 and two each 23258, 50939r and 701090 192355 Controller complete, for 150 to 250 volts, A. C. or D. C. Motor, for Portable Case Set No. 204, Nos. 51007i>, 191278, 192141,192269,192273,192274,192302, 192304, 192305,192356, 192358, 899279 and two each 23258 50939r and 701690

From the library of: Superior Sewing Machine & Supply LLC 90 NUMERICAL LIST OF PARTS

NO. PLATE NAME 192356 9160 Controller Lead complete, 6 in. long, for 192353 to 192355, No. 192357 and two each 191960 and 191961 192357 Controller Lead for 192356 192358 9160 Controller Lead complete, 5 in. long, for 192353 to 192355, No. 192359 and two each 191960 and 191961 192359 Controller Lead for 192358 192393 9160 Knee Plate Bracket with 51016c, for 192394 192394 Knee Plate complete for Library Cabinet Talde Set No. 40, Nos. 41c, 1650c, 191123 and 192393 192424 9159 Field Coil Retainer for S. U. Motors 192439 9151 Knee Lever with 192440,for Electric Com bination Table Set No. 304 *192440 Knee Lover Socket for 192439 192455 Motor Frame complete for S. U. Motors, Nos. 457c, 190537, 191370, 192456 and two each 440c, 458c, 190538 and 190539 192456 9151 Motor Frame for 192455 192457 9159 Brush (carbon) for S. U. Motors 192458 9159 " Holder Spring for S. U. Motors... 192459 9159 " " Tube for S. U. Motors 192460 9159 " " Insulating Bushing for S. U. Motore 192467 9160 Field Core for S. U. Motors 192471 9160 Armature complete for S. U.605 Motor... 192472 " " " S.U.606andS. U. 607 Motors 192473 Armatui-e complete for S. U.608 Motor... 192474 " " " S.U.609Motor... 192475 " " " S.U.610Motor... 192476 " " " S. U.611 and S. U 612 Motors 192477 Armature complete for S. U.615 Motor:.. 192478 " " " S. U.687 Motor... 192479 " " " S.U.690Motor... 192480 " " " S.U.692Motor... *192481 Field Coil (upper) for 192651 •192482 " " (lower) for 192651 •192483 " " (upper) for 192652 *192484 " " (lower) for 192652 •192485 " " (upper) for 192653 •192486 " " (lower) for 192653 •192487 " " (upper) for 192654 *192488 " " (lower) for 192654

From the library of: Superior Sewing Machine & Supply LLC NUMERICAL LIST OF PARTS 91

NO. PLATB NAME •192489 Field CoU (upper) for 192655 •192490 " " (lower) for 192655 •192491 " " (upper) for 192656 •192492 " " (lower) for 192656 •192493 " " (upper) for 192657 •192494 " " (lower) for 192657 •192495 " " (upper) for 192658 •192496 " " (lower) for 192658 •192497 " " (upper) for 192659 •192498 " " (lower) for 192659 •192499 " " (upper) for 192660 •192500 " " (lower) for 192660 •192501 " " (upper) for 192661 •192502 " " (lower) for 192661 •192503 " " (upper) for 192662 •192504 " " (lower) for 192662 •192505 " " (upper) for 192671 •192506 " " (I6wer) for 192671 •192507 " " (upper) for 192672 •192508 " " (lower) for 192672 •192509 " " (upper) for 192673 *192510 " " (lower) for 192673 •192511 " " (upper) for 192674 •192512 " " (lower) for 192674 •192513 " " (upper) for 192675 •192514 « " (lower) for 192675 •192515 " " (upper) for 192676 •192516 " " (lower) for 192676 •192517 " " (upper) for 192677 •192518 " " (lower) for 192677 •192519 " " (upper) for 192678 •192520 " " (lower) for 192678 •192521 " " (upper) for 192679 •192522 " " (lower) for 192679 •192523 " " (upper) for 192680 •192524 " " (lower) for 192680 •192525 " " (upper) for 192681 •192526 " " (lower) for 192681 •192527 " " (upper) for 192682 •192528 " " (lower) for 192682 192537 9162 Singerlight (flexible, less lamp) complete for 101-2 and 101-10 Machines, Nos. 190745,190757,191082,191773,191775, 191792, 191962, 701304 and two each 191778, 191785 and 191786, obsolete..

From the library of: Superior Sewing Machine & Supply LLC 92 NUMERICAL LIST OF PARTS

NO. PL.KTE NAME 192540 9161 Lead Plug complete, for lamp socket, for 190900 and 190984, Nos. 192541 to 192543 192541 Lead Plug Rase for 192540 192542 9161 " Cap for 192540 192543 9159 " Flash Disc (fibre) for 192540.. 192051 Field Coil comidcto for S. U. 003a Motor, Nos. 1924S1 and 192482 192052 Field Coil complete for S. U. 005a Motor, Nos. 192483 and 192484 192653 Field Coil complete for S. U. GOOa Motor, Nos. 192485 and 192486 192654 Field Coil comidete for S. I'. 607a Motor, No.s. 1924S7 and 19248S 192655 Field Coil com|)lete for S. U. OOSa Motor, Nos. 192480 and 192490 192056 Field Coil complete for S. U. 609a Motor, Nos. 192491 and 192492 192057 Field Coil complete for S. U. 610a and S. U. 611a Motors, Nos. 192493 and 192494 192058 Field Coil complete for S. U. 612a Motor, Nos. 192495 and 192496 192659 Field Coil complete for S. U. tiloA Motor, Nos. 192497 and 19249S 192000 Field Coil comidetc for S. U. 687a Motor, No.s. 192499 and 192500 192661 Field Coil comidete for S. U. 690a Motor, Nos. 192.501 and 192502 192002 Field Coil I'omplete for S. U. 692a Motor, Nos. 192.503 and 192504 '. .. 192671 Field Coil complete for S. I'. 603b Motor, Nos. 192505 and 192506 192072 Field Coil complete for S. V. 605b Motor, No.s. 192507 and 192508 192673 Field Coil complete for S. I'. 606b NIotor, No.s. 192.509 and 192510 192674 Field C'oil complete for S. U, 607b Motor, Nos. 192511 and 102512 192675 Field Coil complete for S. U. 608b Motor, No.s. 192513 and 192514 192676 Field Coil complete for S. U. 009b Motor, Nos. 192515 and 192516 192677 Field Coil complete for S. U. 610b and S. U. 611b Motors, Nos. 192517 and 192518

From the library of: Superior Sewing Machine & Supply LLC NUMERICAL LIST OF PARTS 93

NO. PL.'VTE NAME 192678 Field Coil complete for S. U. 612b Motor, Nos. 192519 and 192520 192679 Field Coil complete for S. U. 615b Motor, Nos. 192521 and 192522 192680 Field Coil complete for S. U. 687b Motor, Nos. 192523 and 192524 192681 Field Coil complete for S. U. 690b Motor. Nos. 192525 and 192526 192682 Field Coil complete for S. U. 692b Motor, Nos. 192527 and 192528 192696 Field Coil complete for S. E. 607 Motor, Nos. 190500 and 190501, obsolete 192697 Field Coil complete for S. E. 608 Motor. Nos. 190502 and 190.503, ob.solete 192698 Field Coil complete for S. E. 610 Motor, Nos. 190506 and 190507, obsolete 192699 Field Coil complete for S. E. 612 Motor, Nos. 190510 and 190511, obsolete 192700 Field Coil complete for S. E. 613 Motor, Nos. 190736 and 190737, obsolete 192701 Field Coil complete for S. E. 617 Motor, Nos. 190500 and 190808, obsolete 192702 Field Coil complete for S. E. 618 Motor, Nos. 190502 and 190810, obsolete 192703 Field Coil complete for S. E. 619 Motor, Nos. 190955 and 190956, obsolete 192704 Field Coil complete for S. E. 620 and S. E. 621 Motore, Nos. 190506 and 190809, obsolete 192705 Field Coil complete for S. E. 622 Motor, Nos. 190510 and 190801, obsolete 192706 Field Coil complete for S. E. 627 Motor, Nos. 190500 and 191120, obsolete 192707 Field Coil complete for S. E. 628 Motor, Nos. 190502 and 191394, obsolete 192708 Field Coil complete foi* S. E. 629 Motor, Nos. 190955 and 191870, obsolete 192709 Field Coil complete for S. E. 630 Motor, Nos. 190506 and 191837, obsolete 192710 Field Coil complete for S. E. 632 Motor, Nos. 190510 and 191128, obsolete 192711 Field Coil complete for S. E. 647 Motor, Nos. 191000 and 191001, obsolete 192712 Field Coil complete for S. E. 648 Motor, Nos. 190952 and 190953, obsolete 192713 Field Coil complete for S. E. 649 Motor, Nos. 191118 and 191119, obsolete

From the library of: Superior Sewing Machine & Supply LLC 94 NUMERICAL LIST OF PARTS

NO. PLATE NAME 192714 Field Coil complete for S. E. 650 Motor, Nos. 191217 and 191218, obsolete 192715 Field Coil complete for S. E. 652 Motor, Nos. 190510 and 191871, obsolete 192716 Field Coil complete for S. E. 657 Motor, Nos. 190500 and 191159, obsolete 192717 Field Coil complete for S. E. 624 Motor, Nos. 191109 and 191110, obsolete 192718 Field Coil complete for S. E. 680 Motor, Nos. 190955 and 191099, obsolete 192719 Field Coil complete for S. E. 687 Motor, Nos. 191061 and 191062, obsolete 192720 Field Coil complete for S. E. 690 Motor, Nos. 191063 and 191064, obsolete 192721 Field Coil complete for S. E. 677 Motor, Nos. 191061 and 191181, obsolete...... 192722 Field Coil complete for S. E. 660 Motor, Nos. 190506 and 191235, obsolete 192723 Field Coil complete for S. E. 662 Motor, Nos. 190510 and 191291, obsolete 192724 Field Coil complete for S. E. 658 Motor, Nos. 190502 and 191318, obsolete 192725 Field Coil complete for S. E. 659 Motor, Nos. 190955 and 191371, obsolete 192726 Field Coil complete for S. E. 665 Motor, Nos. 192066 and 192067, obsolete 701304 9159 Singerlight Lead Insulating Washer (fibre) for 192156 701304 9159 Singerlight Lead Wire Insulating Washer (fibre) for 192099 and 192537 701690 9159 Controller Resistance Unit Screw .Washer (large) for 192215 to 192217 and 192353 to 192355 899279 Name Plate for 192215 to 192217 and 192353 to 192355 899310 Name Plate for S. U. 607a Motor 899311 " " " S. U. 607b Motor 899312 " " " all S. U. Motors except S. U. 607a and S. U. 607b

From the library of: Superior Sewing Machine & Supply LLC ILLUSTRATIONS

OF

PARTS

From the library of: Superior Sewing Machine & Supply LLC PLATE 4387-rULL SIZE

28086 26231 124307

NN83

From the library of: Superior Sewing Machine & Supply LLC PLATE 4924-FXTLL SIZE

25291 56356

56496

56497 I

56493

56499

From the library of: Superior Sewing Machine & Supply LLC PLATE 5635-FULL SIZE

9SSS5

From the library of: Superior Sewing Machine & Supply LLC PLATE 5637-PULL SIZE LLC Supply & Machine Sewing Superior of: library the From i-'

X II

From the library of: Superior Sewing Machine & Supply LLC PLATE 8104-0NE-HALF SIZE

riBLD COILS

UPPER UPPER A a

QROWN- BRONN

6LACK- —

BLACK

IN WPITINO OffOEffd FOR COMPLETE held C0/L3 f^EFER TO FAOE 33 TO OBTAIN NUMBER AND REQUIRED VOLTAOE

S" l

From the library of: Superior Sewing Machine & Supply LLC PLATE 8190-FirLL SIZE

1929)6 191789 191766 191785 IK

■'i?' f

19)997 191815

191926 191930

''191957 I

192909 192916

From the library of: Superior Sewing Machine & Supply LLC PLATE 8197-FTrLL SIZE

191934- 19^040

191932

9£305 192039

19)93 3 192280 192306 67374 192274 ilfl

192272 1785

701462

192304

From the library of: Superior Sewing Machine & Supply LLC PLATE 8301-ONE-HALF SIZE

^hSO'd

(o^503

bbh'57

From the library of: Superior Sewing Machine & Supply LLC PLATE 8302-FULL SIZE

i

From the library of: Superior Sewing Machine & Supply LLC PLATE 8303-0NE.HALF SIZE 66578 8366 66526 66580 6

From the library of: Superior Sewing Machine & Supply LLC PLATE 8304-FTJLL SIZE

665'97 Lb5G&

i

• >-•, •' '■ 66535

bbS'Sa 66530 66542

o 66544

66529 66545 66546

From the library of: Superior Sewing Machine & Supply LLC PLATE 8305-FULL SIZE

66548 181 56033

66550

-i4

66564

From the library of: Superior Sewing Machine & Supply LLC PLATE 8306-FULL SIZE

66639

6659

P From the library of: Superior Sewing Machine & Supply LLC PLATE 8307-FTJLL SIZE

SM

From the library of: Superior Sewing Machine & Supply LLC PLATE 8308~FULL SIZE

From the library of: Superior Sewing Machine & Supply LLC PLATE 8311-ONE.HALF SIZE

m

iUrj^JCb f I

From the library of: Superior Sewing Machine & Supply LLC PLATE 8312-FirLL SIZE

3659^ 3593

120319

66649 M

66646

From the library of: Superior Sewing Machine & Supply LLC PLATE 8313-FTILL SIZE

120390

120598

From the library of: Superior Sewing Machine & Supply LLC PLATE 8314-FULL SIZE

66601 66600

66607

66604- 50465 66598 66609 66599

66602 66650 504-64- 66605

From the library of: Superior Sewing Machine & Supply LLC PLATE 8316-FULL SIZE

56354- 56352

56356

28253

I 1243)9

56374.

From the library of: Superior Sewing Machine & Supply LLC PLATE 8322-ONE-FOURTH SIZE

It- U if

^ -

5626

From the library of: Superior Sewing Machine & Supply LLC PLATE 8323-ONE-FOURTH SIZE

191063 190900 lV * I 191046' r90749 ^^0144-

190355

I 90B36 190904 190962 I 90757j/'^'^®^ 1*9065

90696 I 190070 A 190656

From the library of: Superior Sewing Machine & Supply LLC PLATE 8324-ONE-HALF SIZE

66669

190869

•• # 190878

•:-.Vr 0-

a. s*

- -

From the library of: Superior Sewing Machine & Supply LLC PLATE 8326-FULL SIZE

190535 190537 <90536 4-58 )90bfo8

90530

90873 191 1 17

50566

From the library of: Superior Sewing Machine & Supply LLC PLATE 8326-FULL SIZE

From the library of: Superior Sewing Machine & Supply LLC PLATE 8327-ONE-HALF SIZE 190663 iQOfsOi

90501

9004

•SFnr^

From the library of: Superior Sewing Machine & SupplyiT LLC PLATE 8328-EXrLL SIZE

5644! 2807fo

56497

28123

56444

From the library of: Superior Sewing Machine & Supply LLC PLATE 8329-rULL SIZE

I90blfe I906I5 190552 190839

190553 50520 I9l09fc 190484 iTS If I90

1908265

f m I •i

190835

From the library of: Superior Sewing Machine & Supply LLC PLATE 9151-ONE-FOURTH SIZE

e>6^9Z 124344 3Z0&Z

24447

124449

From the library of: Superior Sewing Machine & Supply LLC PLATE ,9152-FTTLL SIZE

St.

From the library of: Superior Sewing Machine & Supply LLC PLATE''9153—ONE-HALF SIZE

From the library of: Superior Sewing Machine & Supply LLC 7

From the library of: Superior Sewing Machine & Supply LLC PLATE 9155-FULL SIZE

5429 I203b3 35207

35206

337 36696 36658 t 11 T 66294

S.S.476 9525 67572 35002 ipi

,20376 35003 35006

35004 35005

798 5.3.368 35135 732

28242

From the library of: Superior Sewing Machine & Supply LLC PLATE 9156-FULL SIZE

20348

120400

From the library of: Superior Sewing Machine & Supply LLC PLATE 9157-ONE.HALF SIZE

24360 67724 124453 124437 124420

124435 124436

124354

24429

124456 24343

124434

124492 124438 124358

From the library of: Superior Sewing Machine & Supply LLC PLATE 9158-FULL SIZE

124-345 124493 I2434(b 124456

6295 9320 124347 124378 51045

124448 124379 124360 50702

25070

124370

24428

24371

24369

124367 24422

¥

From the library of: Superior Sewing Machine & Supply LLC PLATE 9169-FTILL SIZE

191370 19:2460 92424

192458 192459 7958 192457 192543

191775 192302 191938 191939

701690 191703 701304 I9I4I0 F

190845

91792 2523 I9I5I2 ifl

190646-

From the library of: SuperiorI90647-- Sewing Machine & Supply LLC -om-KAtt Bizw

92060 1924^7 92356 I9235fe

192393

191 177 92061

92471

192299

192298

From the library of: Superior Sewing Machine & Supply LLC PLATE 9161-ONE.HALr SIZE

L- 192543

191773

l5E21l-3£to55 Volta.Green 190744 192140-95 toI46Volta.WhlU WHEN OF^DEf^INO 5TATE 192)41-l50to250Votta,61ue VOLTAGE ffEQUIF^ED f r. u;

-192308

192149 90745

From the library of: Superior Sewing Machine & Supply LLC PLATE 9162-ONE-rOURTH SIZE

92)56

192537

92099

92101 I92I5I 190757

From the library of: Superior Sewing Machine & Supply LLC PLATE 9163-FTTLL SIZE

192144 191278 92143

191953 9138 91375

51032 50939 51007 50609 50016 1497 1

50564 (oZQ 50596 50617 50200 9 m

From the library of: Superior Sewing Machine & Supply LLC From the library of: Superior Sewing Machine & Supply LLC