DOCSLIB.ORG

Download Our Product Catalog

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Download Our Product Catalog 2021PRODUCT CATALOG OUR MISSION SUPPORTING THE ELITE WARFIGHTER From the very beginning, Wilcox has built a trusted reputation by Vertically enabled operations are implemented within our modern, dedicating and demonstrating commitment to you, our customers. 220,000 square foot engineering and manufacturing facility in Innovative by culture, critically focused on quality, every Newington, New Hampshire, USA. With our state-of-the-art design feature of our products is designed with you in mind. Constant tools, advanced prototyping and fabricating test equipment, we can communication, collaboration and direct interaction with you is provide our customers with an unmatched responsiveness and what informs and drives every aspect of our Wilcox “systems of quality without compromise. From a one piece helmet mount to a systems” approach to Warfighter capability development. complex optic and integrated fire control system. No single part is addressed in isolation but is optimally designed and manufactured As a proud ISO 9001:2015 certified company, our standards with both balance and focus on its inter-relationship to the overall for quality are demonstrated every single day throughout the role it plays in our “warfighter as a system” approach. entire process from design, testing and verification, production, product launch and subsequent service support. No matter what Whether operating in a remote distributed battle space, or within the product material, size or complexity, the Wilcox commitment a dense urban environment, the diverse needs of you, our to quality and customer support never ends. The Wilcox brand customers, drives us to deliver the highest level of quality possible remains synonymous for cutting-edge innovation and unsurpassed and motivates us to develop new, innovative products. Products quality, while at the same time increasing the operational capability designed to enhance operations and survivability, increase and providing a tactical discriminator that is simply without peer. situational awareness, generate greater tempo and provide maximum lethality at the tactical edge. “OUR CUSTOMER’S LIFE DEPENDS ON IT” In 1993, we were awarded our first patent with the development of the first laser aiming device integrated into a handgun. In 1996, Wilcox responded to a call from the Special Operations Community in search of a solution to effectively mount night vision systems. Working closely with the operators, the three-hole shroud was born and a “systems approach” to night vision device mounting solutions was formally initiated. This continues today with our next generation Enhanced Night Vision Goggle (ENVG) and other mounting solutions. To date, Wilcox has been awarded over 80 patents with 69 more pending. Wilcox has evolved into an agile, highly diversified global company offering over 260 products with JAMES W. TEETZEL a customer base in 28 countries worldwide. CHAIRMAN & CEO SEE INSIDE WILCOX PRODUCT ICONS TABLE OF CONTENTS INFRARED 123A 04 A SYSTEMS APPROACH LASER BATTERY(S) 05 – 06 WILCOX/BTAC VISIBLE AA 07 – 08 RISING TO THE CHALLENGE LASER BATTERY(S) 09 – 10 COMBAT SYSTEMS VARIABLE BALLISTIC ILLUMINATOR SOLVER 11 – 16 FUSION SYSTEMS 17 – 22 FIRE CONTROL SYSTEMS FIXED BLUETOOTH® 23 – 28 LASER AIMING DEVICES ILLUMINATOR 29 – 32 WEAPON SOLUTIONS WHITE REFLEX LIGHT SIGHT 33 – 36 NIGHT VISION MOUNTING SYSTEMS INFRARED INTEGRATED 37 – 45 MOUNT / SHROUD COMBINATIONS LIGHT IRON SIGHT 46 DPAM MOUNT LASER TRAJECTORY 47 – 48 AERONOX SYSTEM RANGEFINDER SWITCH 49 – 50 SHROUDS 51 – 52 NVG BINO BRIDGE SYSTEMS HORN BREAKAWAY INTERFACE MOUNT 53 – 54 NVG SOFT HEAD HARNESS 55 – 56 NVG PARTS & ACCESSORIES DOVETAIL FORCE TO INTERFACE OVERCOME 57 – 58 LIFE SUPPORT SYSTEMS ANVIS LOW BATTERY 59 – 64 HYBRID PATRIOT 5510 SYSTEM INTERFACE INDICATOR 65 – 66 QUICK RESPONSE KIT POWERED EXTENDED 67 - 69 EXOTHERMIC TORCH KIT & ACCESSORIES MOUNT LENGTH 70 WARRANTY/SC INFORMATION BTAC FIXED A SYSTEMS APPROACH TO COMBAT OPERATIONS B ENABLED MOUNT Integrating our robust line of Wilcox electro-optic combat systems The mobile Command Center immediately redirects an airborne and hybrid life support systems with the real time network sector drone to verify the potential threat and employing system created and powered by our partner Blueforce Development, cueing and correlation software, rapidly assess the situation to our combined resources bring highly scalable and dynamically escalate or deescalate the engagement response. The target integrated capabilities to operations. images captured by both the drone camera and the Wilcox Fusion System (equipped with the CMOS camera system option COLOR OPTIONS The high tempo requirements of today’s operations dictate an accessed via Bluetooth) are transmitted within the BTAC network ability to collapse decision space at all levels. Our systems equipped with AI powered target classification and biometric BLACK (-B) LUSTERLESS BROWN (-LB) approach leverages advanced sensors and rapid routing of real identification software, providing a response back to the warfighter time actionable information, all critically focused to reinforce MARITIME GREY (MG) OLIVE DRAB GREEN (-G) within 7 seconds. The BTAC Mobile Command Center confirms situational awareness - from the Command level out to the tactical the target is hostile and directs the warfighter to engage the target GUNSHIP GREY (GG) FOLIAGE (-F) edge. immediately, and further alerts all operators within the networked TAN (-T) ADF GREEN (-77) force of the escalated threat in sector. This Operational View illustrates and reinforces the systems COYOTE (-C) WHITE (-W) approach as the warfighter equipped with the Wilcox Fusion Wilcox stands committed to providing our Elite Professionals with CAMI (-CM) System observes a potential enemy threat, and quickly moves to the most advanced and capable combat and life support systems orient on the target. Advanced electro-optics and sensors within *NOT ALL PRODUCTS ARE AVAILABLE IN EVERY COLOR, in the world. CERTAIN PRODUCTS MAY REQUIRE A MINIMUM QUANTITY the Fusion System enable rapid target acquisition and via system FOR COLORS OTHER THAN BLACK. and Bluetooth networked interface, send an immediate alert to www.wilcoxind.com/SystemsApproach the Blueforce Tactical (BTAC) Mobile Command Center vehicle noting activity in real time with exact location alignment and target ITAR/EXPORT COMPLIANCE parameters. SELECT PRODUCTS SHOWN HEREIN ARE SUBJECT TO EXPORT CONTROLS ISSUED BY THE U.S. DEPARTMENT OF COMMERCE OR THE U.S. DEPARTMENT OF STATE AND REQUIRE A VALID EXPORT LICENSE TO BE SHIPPED OUTSIDE OF THE UNITED STATES. EXPORT OR RE-EXPORT WITHOUT PRIOR AUTHORIZATION FROM THE U.S. GOVERNMENT IS STRICTLY PROHIBITED. PLEASE CONTACT OUR EXPORT COMPLIANCE DEPARTMENT FOR ADDITIONAL INFORMATION. TACTICAL COMMAND ON DEMAND NEXT GENERATION CAPABILITY BTAC (BlueforceTACTICAL) is an extensible situational awareness mobile application that enables the rapid formation of mobile teams and fuses sensor data of attached or proximate sensors to provide real-time location and sensor sharing… BTAC enabled Wilcox Systems provide teams the information they need in the palm of their hands. BTAC obliterates traditional IoT and AI information stovepipes by fusing real-time human and sensor data across multiple incident modalities, collapsing the distance from sensor-to-decision maker-to-responder, and accelerating re-cognitional support by widening the decision- makers aperture to greater numbers and types of sensor inputs. BTAC is secure, field-proven, and enables operators to extend their capabilities, share information horizontally, and swarm faster than their adversaries by communicating with devices that they carry and those installed at fixed locations, mounted on manned and unmanned systems, or worn on the body. www.wilcoxind.com/TacticalCommand IN PARTNERSHIP WITH: SEE BTAC IN ACTION RISING TO THE CHALLENGE This past year we found ourselves confronted with one of Ventilator Task Team to minimize complicated technical Ongoing discussions between Wilcox team, FDA Deputy Wilcox was successful in meeting all exacting engineering the greatest challenges our country and the world has ever aspects and provide a capable and reliable ventilator within Commissioner Dr. Anand Shah and FDA Commissioner and medical standards on 5.1 and was awarded formal faced. Geared for innovation, Wilcox answered the call to a rapid timeline. Dr. John Clarke, Ph.D. in physiology and a Dr. Stephen Hahn paved the way for an accelerated FDA approval for the Patriot SAVR Emergency Transport fight the Global COVID 19 Pandemic. In the remarkably short Fellow in Respiratory Mechanics, flew in to support Wilcox development and production timeline. Throughout April, Ventilator in meeting all criteria for safety, performance and period of 41 days, Wilcox received formal FDA approval activities in ventilator design and testing. The team liaisoned Wilcox’s team worked with the FDA Respiratory Device labeling set forth in the EUA. via Emergency Use Authorization (EUA) for the PATRIOT with all area hospitals and emergency centers for medical Branch team through development, required testing, SAVR. A system which is currently in full production adding material support and respiratory parameters. validation, and submission compliance. to the world’s medical arsenal and working to save lives across the globe. Early on, a determination was made to leverage the Wilcox Patriot Hybrid Life Support System’s 2nd stage regulator On 3.21.2020, a call from the US Government set in motion a as the
Load more

Recommended publications
  • Instruction for Vector Optics Tactical Bipod Mounts ATTENTION: Make Sure Firearm Is Unloaded Universal Picatinny Style
    Instruction for Vector Optics Tactical Bipod Mounts ATTENTION: Make sure firearm is unloaded Universal Picatinny Style Fit 21mm weaver and picatinny rail Press down the lockable button to open or folder the bipod Turn and release the leg sleeve, the spring loaded leg will be extended, then fasten the leg sleeve again To retract the leg, loosen the leg sleeve, push back the leg to the end, retighten the leg sleeve again Solid rubber feet avoid slipping With barrel mount adapter Stud Connection Style Stud connection mount for sling attachment Press the button to release the spring loaded leg If need to retract the extendable leg, just press the button again and push the leg back Solid rubber feet avoid slipping With weaver picatinny mount adapter. To use the adapter, remove the bipod tiny rubber sleeve, clamp into the adapter stud hole. Fasten the bottom nut. Swivel Stud Connection Style Swivel stud connection mount for sling swivel attachment Press the button to release the spring loaded leg 15 inch bipod, press first button and pull the extendable legs, press last button to release the spring loaded leg If need to retract the extendable leg, just press the button again and push the leg back Solid rubber feet avoid slipping Weaver picatinny mount adapter. To use the adapter, remove the bipod tiny rubber sleeve, clamp into the adapter stud hole. Fasten the bottom nut. Swing-able design for leveling on uneven ground. Select proper angle and fasten thumb nut to lock the position www.scvector.biz www.scvector.com .
    [Show full text]
  • Manson Precision Receiver Accurizing System
    Manson Precision Receiver Accurizing System Rhomboidal and pavid Slim reinterred her sundries feign or municipalizes estimably. Bewhiskered and dorsiventral Shurlock often disorientates some suspiration jeopardously or gumshoe therapeutically. Toothsome Ned sometimes climb-downs any hypogyny objectivize thriftily. Austenite molecular structure in receiver accurizing your order to impact forging die was attached to It has a receiver accurizing and precision machined hand when needed. National Match Rifle, Serial No. Ups For Remington Centerfire Rifles MAGAZINE CLIP is best carrying cases for extra ammo; they spoke right knowledge the gun. Available in precision manufacturing, deeply serrated face! Winchester receiver accurizing system and precision receiver, butt plate screw only received and the systems, the barrel bore. Sold had designed by the receiver accurizing kit! If they are precision. Even directional change the receiver accurizing system for precise, fulton armory operating rod rail hand and flexibility. The replacement magazine followers should have three neat and evenly spaced spot welds attaching the stop to the follower. End to match category will enlarge due to. The magazines were rotated for even use and the rate of fire was measured during one of the twenty round bursts. It is precision receiver accurizing system was unable to do so you wont need to work was a manson. He fled to the jungle the same day. SPECS: Aluminum, anodized, red. The reamer has a FLOATING pilot that measures approx. Bush and receiver. SPECS: Stainless steel, belt finish. Tactical Forums discussion board www. Low maintenance, Parkerized finish resists corrosion and matches the rest of your rifle. This corn is therefore excellent turnover and fluctuate barely ever used.
    [Show full text]
  • Art of Precision
    2017 CATALOGUE ART OF PRECISION «Promtechnologia» (Industrial Technology) company directs careful attention to its products’ quality which allows it to gain some impressive results: Orsis rifles’ accuracy exceeds their most common counterparts’ results greatly. This reality is confirmed by the multiple winning scores of shooters participating in high-accuracy shooting international competitions with their Orsis rifles in hands. There is a parameter in ballistics called “minute of angle” (or MOA) which estimates accuracy of shooting and it is defined, as a rule, by a group of 3-5 shots. Rifles having MOA ratio less than 1 are called sniper rifles. «Promtechnologia» company guarantees that all Orsis rifles demonstrate accuracy not over 0.5 MOA and a number of models demonstrate even better performance. www.orsis.com 3 President’s Message 4 Orsis Special 6 Orsis SE T-5000 M 8 Orsis M-15 Carbine 12 Orsis AR-10 National Match 16 Orsis Hunting 20 Orsis 120/140 22 Orsis SE Hunter M 26 Orsis SE Alpine M 30 Marocchi Si12 / Walnut 34 T-5000 / 8-11 120/140 / 22-25 Varmint / 48-51 Marocchi Si12 / Plastic 36 Marocchi First-E 40 Marocchi First-E Deluxe 42 Orsis Sport 46 Orsis Varmint M 48 Orsis F-Class 52 Glock Pistols 54 M-15 / 12-15 Hunter / 26-29 F-Class / 52-53 Production 56 High-Technology Equipment 58 High-Precision Technologies 59 Exceptional Materials 60 Innovative Development 61 International Cooperation 61 AR-10 / 16-19 Alpine / 30-33 Glock / 54-55 Services 62 Rifle Barrels Replacement 63 Cerakote Coating Application 63 Technical Maintenance 64 Decoration & Engraving 65 Orsis Сustom 65 Dealer Network 66 Marocchi / 34-45 Contacts 66 HIGH-PRECISION FIREARMS SYSTEMS ORSIS 4 ORSIS ART OF PRECISION President’s Message 5 Dear friends! The first catalogue of «Promtechnologia» (Industrial Technology) We support our shooters’ aspiration to be the best hunters and company is now introduced for your kind attention and, as you will sportsmen.
    [Show full text]
  • CASV Handguard for the FAL Rifle Note: the CASV-FAL System Will Not Fit on Rifles Using the G1 Or Similarly Profiled Barrels
    CASV Handguard for the FAL Rifle Note: The CASV-FAL System will not fit on rifles using the G1 or similarly profiled barrels Improper installation can result in damage. Do not attempt installation if you are not familiar with the firearm, tools and techniques mentioned. You are responsible for any damage or READ injury resulting from the improper use THIS! or installation of this product. Ensure the rifle is CLEAR and SAFE! Before installation, read Instructions, Warnings and Notes. NOTE: Make sure that the firearm is unloaded and safe before proceeding – if you are unsure of how, or uncomfortable with the proper clearing and safe handling of the firearm, do not proceed! We recommend that the installation of this part be done only by a qualified gunsmith or agency armorer. 1. Before proceeding, please inspect the handguard assembly and hardware to ensure that you are familiar with all of the parts. 1 - Upper handguard Assembly 2 - Lower handguard Assembly 3 - Forward mounting screw retaining clip 4 - Forward mounting screw 5 - Rear mounting cross screw 6 - Rear mounting clamping nut 7 - Upper Handguard retaining screws (6 for FAS, 8 for FAL) 8 - Picatinny Accessory Rails & Screws 2. Install the lower handguard section by sliding it over the front sight gas block, and rearward over the handguard retainer. After the lower section is in place, install the forward mounting screw from the right side of the handguard, ensuring that it goes through the front sight gas block. Note: only snug the screw enough to hold the lower handguard section in place. 3.
    [Show full text]
  • PM Crew Served Weapons Overview Small Arms Symposium & Exhibition
    TheThe Soldier:Soldier: America’sAmerica’s MostMost DeployedDeployed CombatCombat SystemSystem PM Crew Served Weapons Overview for the Small Arms Symposium & Exhibition National Defense Industrial Association 16-19 May 2006 BG James R. Moran COL Carl A. Lipsit Mr. Peter Errante Program Executive Officer Soldier PM Soldier Weapons Deputy PM Crew Served Weapons Crew Served Weapons 2 PM Soldier Weapons Programs List DEVELOPMENT WEAPONS PROCUREMENT Objective Individual Combat Weapon (OICW) 37. M101, CROWS, Remote Mount 1. OICW Increment I 38. M151E1 & M151E2 Protector Remote Wpn System (RWS) 2. OICW Increment II - XM25 Air Burst Weapon 39. MK19 Advanced Crew Served Weapons (ACSW) 40. Mod Kit 3. Advanced Crew Served Weapon (ACSW) Programs 41. Lightweight Adjustable Sight Bracket 42. Tactical Engagement Simulator (TES) SOLDIER ENHANCEMENT PROGRAMS 43. M107 Semi Automatic Long Range Sniper Rifle 4. XM26 - 12 Gauge Modular Accessory Shotgun System 44. M240B, 7.62mm Medium MG (MASS) 45. M240B Collapsible Buttstock 5. Joint Combat Pistol 46. M192, Light Weight Ground Mount For MG 6. Family of Small Arms Suppressors 47. Improved Bipod 7. M68 Close Combat Optics (Dual Source Qualification) 48. Improved Flash Suppressor 8. XM1068, 12 Gauge Non-Lethal Extended Range Round 49. Combat Ammunition Pack 9. XM1022, Sniper Ammunition for M107 50. M240B Short Barrel 10. XM110 - 7.62 Semi-Automatic Sniper System (SASS) 51. M240B Improved Buttstock 11. Close Quarters Battle Kit 52. Sling Assembly for the M240B 12. XM1041/XM1042/XM1071 - Close Combat Mission 53. Short Barrel Capability Kit 54. M249, 5.56mm Squad Automatic Weapon 13. Advanced Sniper Accessory Kit (ASAK) 55. M192, Lightweight Ground Mount For MG 14.
    [Show full text]
  • (12) United States Patent (10) Patent No.: US 7,121,034 B2 Keng (45) Date of Patent: Oct
    USOO7121034B2 (12) United States Patent (10) Patent No.: US 7,121,034 B2 Keng (45) Date of Patent: Oct. 17, 2006 (54) BPOD MOUNT AND GRIPASSEMBLY 6,487,807 B1 * 12/2002 Kopman et al. ............... 42.94 2005/0241206 A1* 11/2005 Teetzel et al. ................. 42.72 (76) Inventor: Da Keng, 875 Wharton Dr. S.W., Atlanta, GA (US) 30336 FOREIGN PATENT DOCUMENTS (*) Notice: Subject to any disclaimer, the term of this DE 103.108O2 A1 * 9, 2004 patent is extended or adjusted under 35 U.S.C. 154(b) by 0 days. * cited by examiner Primary Examiner J. Woodrow Eldred (21) Appl. No.: 11/056,134 (74) Attorney, Agent, or Firm Jones Tullar & Cooper, PC (22) Filed: Feb. 14, 2005 (57) ABSTRACT (65) Prior Publication Data A grip and bipod mounting device for mounting a bipod US 2005/O188588 A1 Sep. 1, 2005 Supporting grip assembly to a "picatinny’ mounting rail structure as are often affixed below the forearm stock of a Related U.S. Application Data firearm such as a military rifle (e.g., as per standard MIL STD-1913). In particular, the present invention is directed to (60) Provisional application No. 60/543,571, filed on Feb. mounting a Parker-Hale style of firearm bipod on a bipod 12, 2004. Supporting grip assembly including a contoured mounting (51) Int. C. block segment inletted to cover and attach to a picatinny rail affixed beneath the forearm stock of the firearm. A grip or F4 IC 23/00 (2006.01) handle depends transversely from the mounting block seg (52) U.S.
    [Show full text]
  • Universal Featherweight Bipod
    UNIVERSAL FEATHERWEIGHT BIPOD FitS: Any Firearm with a Sling Swivel Stud and AR-15 Types INSTALLATION INSTRUCTIONS PART# BIP0300 MAKE SURE YOUR FIREARM IS UNLOADED BEFORE STARTING! UNIVERSAL BIPOD ASSEMBLY: INSPECT EXISTING SLING SWIVEL STUD FOR TIGHTNESS! NON-SWIVEL SWIVEL Mounting O-Ring Bracket (Swivel Only) (See Step #9) Depress “Snap-n-Lock” button to fold Non-Swivel legs forward, OR IMPORTANT: Collar down or (See Step #10) Fits AR-15 with ROUND Mil Spec Yoke Assembly rearward Twist knurled knob Swivel Collar Handguards Without Modification. Halves to extend, retract M-4 Requires Additional Hole. or lock legs Fits any Rifle with Sling Swivel Stud OR Assemble Universal Bipod: Counterbore Washer Flat Top Washer 1. After deciding to build non-swivel or swivel bipod, position mounting bracket as shown in picture at right, install either the non-swivel collar or the swivel collar in the assembly. #10 x 3/4 Screws 2. Install non-swivel collar or swivel collar halves onto top side of mounting bracket with Thick Thick pins aligning with holes in mounting bracket. Washer Washer 3. If swivel collar halves were used, place o-ring into groove on top side of mounting bracket. Left Leg Right Leg 4. Install yoke assembly over post on mounting bracket and align (2) pins on bottom of yoke with holes in non-swivel collar or in open area between swivel collar halves. 5. Install washer over the post and secure with the pink pre-coated #10 x 3/4 screw using a Phillips screw driver. NOTE: Non-swivel Bipod will use the washer with the counterbore INSTALLING BIPOD TO RIFLE: top and Swivel Bipod will use the washer with the flat top.
    [Show full text]
  • Fabdefence.Pdf
    2012 2-15 grips 16-29 rail systems 30-33 K-pos 34-45 Buttstocks 46-53 TACTICAL FLASHLIGHT ADAPTORS 54-59 Magazine accessories 60-69 parts & upgrades 70-71 Self-Healing Targets 72 index gripsTarget Accuracy AG-43 AGF-43S AR15/M16 Pistol Grip Tactical Folding Pistol Grip for-M16-M4-AR15 Finger Swelts and a Backstrap Shape Designed to Enhance Transforms a Horizontal Positioned Grip to Vertical Position Grip, Even when Wet Weapon Fits Easier in Gun Case and on Weapon Rack Extended Beavertail for Better Control, Allowing a Higher Firmer Hold Provides Easier Maneuverability, more Convenient for Undercover Readily Accessible Storage Area with Securely Sealed Hinged Door Work and Concealment MIL-SPEC Reinforced Polymer Composite Easier and Faster Vehicular Deployment Available in Black and Two Camouflage Colors: Olive Drab Green and Desert Tan Quick Fold/Unfold Button Made From Reinforced Polymer Composite 04 Grips AG-47 AG-58 SG-1 Ergonomic Pistol Grip for AK-47/74 SA. VZ. 58 Pistol Grip Sniper Pistol Grip Advanced Ergonomic Design Prevents Unique Texture Prevents Slipping Replaces Standard Pistol Grip To Provide Wrist Fatigue and Ensures Secure Grip in When Wet Greater Comfort and Operational Control Wet Conditions Advanced Ergonomic Design Advanced Ergonomic Design Improves Trigger Operation Built-In Storage Compartment Adjustable Palm Swell Style Grip Built-In Storage with Removable Enhances Finger to Trigger Correspondence Adapts Easily To Various Sized Hands Cushioned Battery Holder Tough Material & Design Applies Pressure to the Palm of the Hand Manufactured with MIL-SPEC Reinforced Available in Black and Two Camouflage Allowing Deliberate and Measured Polymer Composite Colors: Olive Drab Green, and Desert Tan Trigger Pull Available in Black and Two Camouflage Tough Material & Design Colors: Olive Drab Green, and Desert Tan Available in Black 05 Grips agr-870 agm-500 wg-1911 Remington 870 Pistol Grip Mossberg 500 Pistol Grip 1911 Mag.
    [Show full text]
  • 2020 Product Catalog American Defense Manufacturing Is a Leader in Contents Mounting Solutions for a Variety of Optics, Lights, Lasers and Accessories for Firearms
    2020 Product Catalog American Defense Manufacturing is a leader in Contents mounting solutions for a variety of optics, lights, lasers and accessories for firearms. The proprietary Quick Disconnect Auto Lock system is unrivaled when 3-4 New Products it comes to locking, adjustable quick disconnect 5-8 Optics mounts and is the backbone of ADM. 9-10 Optic Packages In 2015, ADM proudly introduced the Universal 11 Mount Introduction Improved Carbine (UIC), one of the finest lines of AR-15 style rifles offering true, fully ambidextrous 12 QD Autolock controls and overbuilt components. 13-18 Red Dot Mounts Today, American Defense Mfg capitalized on their 19-26 Magnified Scope Mounts mount and firearm experience to develop a unique 27 Accessory Mounts line of optics designed specifically for the AR15 but 28 Bipod Mounts ideal for shotguns, subguns, muzzleloaders and more. 29-30 Light Mounts Welcome to American Defense 2020. 31-32 Miscellaneous Mounts 33-34 Non-QD GI Bolt Mounts 35-38 Legacy Lever Mounts 39-46 Rifle Systems 47-49 Rifle Components 50 Information TIONAL N LY E T N I R S I O U P E R This commercial marketing catalog does not contain technical data whose export is restricted by the Arms Export Control Act or International Traffic in Arms Regulations. All information is subject to change without notice. NEW PRODUCTS NEW PRODUCTS ADM PRC-700SA Chassis New ADM Mounts The new ADM PRC-700SA chassis is designed with the precision rifle competitor in mind. Accepting common AICS magazines, this chassis is engineered with features and components that will help you make successful shots from the most dynamic or improvised positions.
    [Show full text]
  • Press Release
    ® PRESS RELEASE LEAPERS, INC. 32700 Capitol Street, Livonia, MI 48150, USA Tel: (734) 542-1500, Fax: (734) 542-7095 Integrated Precision: UTG's New Recon Flex Bipods UTG recently introduced their long awaited Recon Flex bipod series and they are changing the game. Bipods can be heavy and cumbersome that many have opted to leave them off of their rifles in favor of more simplistic means, such as, simply propping their rifle on top of their pack. The Recon Flex saves on the weight and eliminates bulky mounting bases by fully taking advantage of direct attachment at the 3 and 9 o’clock positions of long guns equipped with either M-LOK® or Keymod handguards. The bipod legs unlock, rotate, and lock into place within its 5 position bidirectional base via an easy to use spring-loaded locking ring. This base allows for both forward and rearward stow away positions along with 90 and 45 degree deployable positions and with the legs being adjustable in length (center height adjustable from 5.7”- 8.0”), makes for an ideal bipod for a variety of different long gun applications. Each individual leg features locking retention thumb wheels that secure whatever height adjustment you make to them. TL-BPDM01 MSRP - $54.97 MSRP TL-BPDK01 MSRP - $54.97 MSRP Visit our company website, www.leapers.com, or drop us a line at 734-542-1500, for up-to-date product information and release dates on our continually expanding product lines, ranging from our Michigan born UTG PRO Made in USA rail systems and mounts, extensive line of flashlights and lasers, parts and accessories, to our popular gun cases and other soft goods.
    [Show full text]
  • The Ideal Service Weapon for Longrange Applications
    www.VOERE.com www.VOERE.com Modular Integrated System Modular Integrated System X3 in flat dark earth with VOERE blockmount, bipod and rifle scope Modular Integrated System Features X3 in camoflague with VOERE Target Suppressor, VOERE X Bipod, Aluminium / steel design (Carbon fibre)• VOERE Tactical Blockmount, VOERE Angle Cosine Indicator and Rifle WScope Folding stock right • Available in 4 colours • (armor black / flat dark earth / coyote tan / tactical grey) Muzzle brake Match • € 5.892,-* Switch barrel system • Calibre changeable • (6.5x47 Lapua - 408 CT) X3 in tactical grey with polymer stock, fore-end long, VOERE Blast Deflector, VOERE X Bipod, 3-position safety • VOERE Tactical Blockmount, VOERE Angle Cosine Indicator, VOERE Monopod-Mini and Rifle Scope Grip AR15 standard • Adjustable Two stage trigger • • VOERE Präzisionstechnik GmbH • 01/21 • VOERE Präzisionstechnik GmbH UIT-rail • Picatinny- and Weaver-rails • Technical Data Mod. X3 € 6.897,20,-* Soft case incl. Inlay (Modular Case System) • Length: ca. 126 cm - 132 cm (depending on calibre and stock) Extras Weight: ca. 7,5 kg - 8,6 kg (rifle incl. magazine and muzzle brake) VOERE Tactical Picatinny block mounts • Barrel: Fluted match barrel stainless steel VOERE Target Suppressors • VOERE X Bipod • Calibre* Twist Barrel** Magazine capacity VOERE Angle Cosine Indicator • 6.5x47 Lapua 1:8” 66 cm / 26” / ca. 2,2 kg 10-rounds (polymer) Front stock extension • 6.5 Creedmoor 1:8” 66 cm / 26” / ca. 2,2 kg 10-rounds (polymer) retail price - manufacturer´s suggested / MSRP *MSRP - standard configuration Spare magazines • 308 Win. 1:12” 66 cm / 26” / ca. 2,1 kg 10-rounds (polymer) values.
    [Show full text]
  • HIGH POWER RIFLE Rule Changes
    HIGH POWER RIFLE Rule changes effective 2016 NRA International Fullbore Prone Rifle Rules 7. Courses of Fire Rule 7.7 – Fullbore Regional Individual Course (90 shots): Day 1 # Shots Distance Target 10 300 yds. MR-63 10 500 yds. MR-65 10 600 yds. MR-1 15 900 yds. LR Day 2 # Shots Distance Target 10 300 yds. MR-63 10 500 yds. MR-65 10 600 yds. MR-1 15 1000 yds. LR NRA High Power Rifle Rules – F-Class 7. Courses of Fire Rule 7.21 – F-Class Mid-Range National Championship Course Day 1 Prone 20 slow 300 yds. MR-63/wMR-63FC Prone 20 slow 500 yds. MR-65/wMR-65FC Prone 20 slow 600 yds. MR-1/wMR-1FC Day 2 Prone 20 slow 600 yds. MR-1/MR-1FC Day 3 Prone 20 slow 300 yds. MR-63/wMR-63FC Prone 20 slow 500 yds. MR-65/wMR-65FC Prone 20 slow 600 yds. MR-1/wMR-1FC Day 4 Prone 20 slow 600 yds. MR-1/wMR-1FC Day 4 will consist of firing two 4-person team matches, 80 shots/team. Any organization authorized to hold the NRA National F-Class Mid-Range Championships must use the course of fire as specified in this rule. 3. Equipment and Ammunition 1 Rule 3.4 F-Class Rifle – (b) F-Class Target Rifle (F-TR) - A rifle limited to .223 Remington or .308 Winchester or their commercial and/or metrification equivalents. Chamber dimensions must not exceed the maximum SAAMI or CIP specifications. Bore, groove, and throat dimensions may be selected to suit bullets used.
    [Show full text]