DOCSLIB.ORG

M&P®10 Accessory Book

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
M&P®10 Accessory Book M&P®10 ACCESSORY BOOK CALIBER: .308 WIN M&P® Double Rifl e Case • Industrial grade 1200D Endura® Fabric Smith & Wesson® Lite Force Tactical • Large exterior pocket with three pockets Pack: 1000 Cubic Inch attached to hold magazines and accessories • Heavy weight 600D Endura® Fabric. • Padded interior zipper shield • Conceal and carry compatible protects fi rearm • Padded, adjustable shoulder strap • Gun securing strap system • Large, adjustable water bottle pocket. • Removable backpack straps • Center compression strap • External compression straps • Hydration ready • Two internal pockets designed to • Padded carry handle hold handguns • Molle loop system • Available in 38” length (MP4235) • Zippered compartment on and 42” length (MP4236) top of pack for eyeglasses • Fits up to a 15” laptop computer • Elastic-encased MASH clip quickly ® M&P Tactical Rifl e Case and easily clips on weapon • Industrial grade 1200D Endura® Fabric • Padded interior zipper shield protects firearm • Removable, padded shoulder strap M&P® Discreet Arms Case • Large external pocket for accessories • Industrial grade 1200D Endura® Fabric • Gun securing strap system • Padded interior zipper shield • Adjustable Magazine pockets protects fi rearm • Heavy duty lockable zippers • Gun securing strap system • Easy clean lining • Four hidden magazine pockets • Available in 38” length (MP4230) • Easy cleaning interior lining and 42” length (MP4231) • Heavy duty lockable zippers • Removable, padded shoulder strap • 42 inch overall length (MP4200) Part M&P® Double M&P® M&P® Smith & Wesson® Lite Description Rifl e Case Tactical Discreet Force Tactical Pack: Rifl e Case Arms Case 1000 Cubic Inch MFG Part 38” (MP4235) 38“ (MP4230) 42” Tan (SW4266) Number 42” (MP4236) 42” (MP4231) (MP4200) Black (SW4265) See the entire line of M&P® and Smith & Wesson® bags as well as many other accessories at www.smith-wesson.com Part M&P® Double M&P® M&P® Smith & Wesson® Lite Description Rifl e Case Tactical Discreet Force Tactical Pack: Rifl e Case Arms Case 1000 Cubic Inch MFG Part 38” (MP4235) 38“ (MP4230) 42” Tan (SW4266) Number 42” (MP4236) 42” (MP4231) (MP4200) Black (SW4265) See the entire line of M&P® and Smith & Wesson® bags as well as many other accessories at www.smith-wesson.com • manufactured with the highest standards for fi t and fi nish • high quality replacement for OEM barrel nuts • made from heat treated alloy steel Apex Hand guard System • black nitride coated for corrosion resistance The Apex Handguard System is an • 100% made in the USA innovative, lightweight, free-fl oat handguard for AR style weapons. Advantages include: Apex Bipod Mount • proprietary non-slip GatorGrip™ • for Harris style bipods that texture for comfort and control fasten into the bottom slot • strong, simple installation • sling stud provided for mounting bipods or • rapid heat dissipation another accessory • available in a variety of lengths • designed to minimize weight and bulk • mounts to a standard barrel nut • not recommended for use as a sling The Apex Handguard™ is engineered for attachment maximum versatility incorporating the • black nitride coated steel for corrosion Controlled Tactical Rail Locating system resistance (CTRL™). CTRL™ allows user to select • 100% made in the USA location of rails and rail lengths. With CTRL™ you don’t force your hands to fi t the rail and accessory layout...you shape the layout to fi t your hands. (Top and accessory rails sold separately.) t Apex Bipod Moun MFG Part Number 2360 2650 2550 3020 3500 MSRP $255.00 $233.00 $208.00 $30.00 $12.00 Website apexhandguard.com Available In Stock • manufactured with the highest standards for fi t and fi nish • high quality replacement for OEM barrel nuts • made from heat treated alloy steel • black nitride coated for corrosion resistance • 100% made in the USA The ATI AR-15 Scorpion Recoil Pistol Grip features ATI’s Scorpion material that absorbs the initial shock wave, which is the felt punch of the recoil. The AR-15 Scorpion Recoil Pistol Grip increases the shooter’s comfort while reducing the muzzle lift. The recoil impact is absorbed by the Scorpion material. The Scorpion material is not affected by chemicals, load size or extreme temperatures, and removes the limitations of spring and piston type recoil suppression systems. The pistol grip fi nger grooves feature ATI’s Sure-Grip Texture. As always, this ATI product is manufactured in the USA from DuPont® Extreme Temperature Glass Reinforced Polymer, and includes a Limited Lifetime Warranty. Accessorize your M&P®10 with the ATI Scorpion Pistol Grip. Part Description AR-15 Scorpion Recoil Pistol Grip MFG Part Number A.5.10.2347 MFG Part Number 2360 2650 2550 3020 3500 MSRP $34.99 MSRP $255.00 $233.00 $208.00 $30.00 $12.00 Website www.atigunstocks.com Available In Stock Website apexhandguard.com Available In Stock Bushnell® Elite® Tactical Make a high-performance tactical decision. Precision engineering. Optical excellence. Rock-solid reliability. They all converge in one of the fi nest tactical rifl escopes in the world today. The Bushnell® Elite® Tactical 3.5-21x 50mm provides long range capability in a short 13.2” overall length. The G2DMR™ (Designated Marksman Reticle) features a mil-hash marked, First Focal Plane (FFP) reticle designed for ranging, holdover and windage correction. Featuring RainGuard® HD, Ultra Wide Band Coating, fully multi-coated optics, target turrets and “Blacked-Out” cosmetics. M-Pro 7® Tactical AR Cleaning Kit The M-Pro 7 Tactical AR Cleaning Kit contains everything needed to maintain all M-16 and AR-15 style rifl es. Includes lockable, hard-sided carrying case, foam gun pad and M-Pro 7 Weapons Maintenance & Product Guide. Millett Tactical Rings. Millett® tactical rings are a lightweight, strong solution for the most demanding uses. Six cap-clamping screws positively hold your scope, no matter the level of recoil and the base clamp holds the scope to the base. Millett tactical rings are your answer to any mounting needs. ube Scope 34 mm T MFG Part ET35215G 070-1510 DT00721 DT00722 DT00723 Number MSRP $2,119.95 $92.95 $86.95 $86.95 $86.95 Website www.bushnell.com Available In Stock Fusion® MSR Modern sporting rifl es require hunting ammunition that’s as customized as the fi rearms themselves. All-new Fusion MSR performs to its peak through 16-inch barrels for AR15 platforms and 20-inch barrels for AR10s. Its primer, propellant and case are all specially designed to provide fl awless feeding, function and ballistic performance in MSRs. The Fusion bullet transfers Part Description Fusion® MSR MFG Part Number F308MSR1 (.308 Win.) Also available in F223MSR1 (.223 Rem.), F68MSR1 (6.8 SPC) , F338FMSR2 (.338 Fed.) MSRP $28.95-$39.95 Website www.FusionAmmo.com Available April 1, 2013 The AR2008 by HI-VIZ® Shooting Systems is a light gathering sight, designed to replace standard MIL-SPEC sight posts. The HI-VIZ sight is a steel sight post that fi ts both AR and M4 rifl es with A-Frame or BUIS-style sight bases. The light gathering fi bers utilize ambient light to offer a bright, precise aiming point. The bright round aiming point more naturally centers in the rear peep sight and is quite helpful when co-witnessing optics. The sight has two sighting points opposite each other giving a sight picture for every two clicks of adjustment. A knurled steel installation / adjustment tool is provided. The sight offers interchangeable fi bers in green and red, and a key for changing the fi bers. Also provided is a carrying case and chain for storage of the spare fi bers, adjusting tool and key. Try a HI-VIZ AR2008 and see what you’ve been missing! Part Description AR Front Post Sight MFG Part Number AR2008 MSRP $32.05 Website www.hivizsights.com Available In Stock UNFAIR ADVANTAGE THE REALITY BEHIND OUR PRODUCTS: “If you come expecting a fair fi ght, you are unprepared.” This common saying among military and law enforcement professionals illustrates the core values and mindset that drive everything we do at Magpul®. Our customer base encompasses a broad spectrum of users; everyone from hobbyists and target shooters to the most specialized and highly trained military units in the world. Regardless of the end user or their mission, our goal is to design equipment with form, fi t, and function far superior to that of your “standard issue” gear. In short, we want to give you an unfair advantage. MAGPUL INDUSTRIES CORPORATION 877 4 MAGPUL // EMAIL: [email protected] // CAGE: 1LX50 PMAG® 20LR $19.95 CTR® CARBINE STOCK MAG243-BLK $39.95 MAG310-BLK • Lightweight, high reliability 20-round MAG310-FDE polymer magazine for SR25/M110/Mk11 MAG310-FOL rifl es (7.62 NATO/.308 Winchester) MAG310-ODG • Compatibility with military-issue 7.62 NATO M118LR ammunition • Drop-in replacement for the standard M4 stock • Friction locking mechanism to minimize MBUS® FRONT $39.95 excess movement MAGPUL BACK-UP SIGHT • Enhanced strength and MAG247-BLK MAG247-FDE MAG247-FOL MAG247-ODG ergonomics • Reinforced polymer • Adjustable for elevation and fi ts all construction MIL-STD-1913 Picatinny rails, • A-frame design with specifi cally the AR15/M16 streamlined exterior • Spring-loaded, folding back-up sight- • Shielded operation lever Positive detent locks front sight post • Lightweight reinforced polymer construction STR® CARBINE STOCK $99.95 MAG470-BLK ® MAG470-FDE MBUS REAR $57.95 MAGPUL BACK-UP SIGHT MAG470-FOL MAG248-BLK MAG248-FDE MAG248-FOL MAG248-ODG MAG470-ODG • Adjustable for windage and fi ts all MIL-STD-1913 Picatinny Rails • Collapsible, drop-in • Spring-loaded, folding back-up sight / replacement for the Same plane small & large folding apertures standard M4 stock • Lightweight reinforced polymer construction • Dual side battery storage tubes • Friction locking mechanism to minimize excess movement MOE® HAND GUARD $34.95 MID LENGTH SIZE: 8 3/16” MAG418-BLK MAG418-FDE MAG418-FOL MAG418-ODG MOE® • For piston and direct impingement RAIL SECTIONS AR15 gas systems • Lightweight reinforced polymer construction • Drop-in design with modular fl exibility $8.95 - MAG406 $6.95 - MAG408 • Front extension provides additional 11 SLOTS 7 SLOTS grip length to shield operator from hot $7.95 - MAG407 $5.95 - MAG409 front sight assembly.
Load more

Recommended publications
  • Instruction for Vector Optics Tactical Bipod Mounts ATTENTION: Make Sure Firearm Is Unloaded Universal Picatinny Style
    Instruction for Vector Optics Tactical Bipod Mounts ATTENTION: Make sure firearm is unloaded Universal Picatinny Style Fit 21mm weaver and picatinny rail Press down the lockable button to open or folder the bipod Turn and release the leg sleeve, the spring loaded leg will be extended, then fasten the leg sleeve again To retract the leg, loosen the leg sleeve, push back the leg to the end, retighten the leg sleeve again Solid rubber feet avoid slipping With barrel mount adapter Stud Connection Style Stud connection mount for sling attachment Press the button to release the spring loaded leg If need to retract the extendable leg, just press the button again and push the leg back Solid rubber feet avoid slipping With weaver picatinny mount adapter. To use the adapter, remove the bipod tiny rubber sleeve, clamp into the adapter stud hole. Fasten the bottom nut. Swivel Stud Connection Style Swivel stud connection mount for sling swivel attachment Press the button to release the spring loaded leg 15 inch bipod, press first button and pull the extendable legs, press last button to release the spring loaded leg If need to retract the extendable leg, just press the button again and push the leg back Solid rubber feet avoid slipping Weaver picatinny mount adapter. To use the adapter, remove the bipod tiny rubber sleeve, clamp into the adapter stud hole. Fasten the bottom nut. Swing-able design for leveling on uneven ground. Select proper angle and fasten thumb nut to lock the position www.scvector.biz www.scvector.com .
    [Show full text]
  • The European Bronze Age Sword……………………………………………….21
    48-JLS-0069 The Virtual Armory Interactive Qualifying Project Proposal Submitted to the Faculty of the WORCESTER POLYTECHNIC INSTITUTE in partial fulfillment of the requirements for graduation by _____________________________ ____________________________ Patrick Feeney Jennifer Baulier _____________________________ Ian Fite February 18th 2013 Professor Jeffrey L. Forgeng. Major Advisor Keywords: Higgins Armory, Arms and Armor, QR Code 1 Abstract This project explored the potential of QR technology to provide interactive experiences at museums. The team developed content for selected objects at the Higgins Armory Museum. QR codes installed next to these artifacts allow visitors to access a variety of minigames and fact pages using their mobile devices. Facts for the object are selected randomly from a pool, making the experience different each time the code is scanned, and the pool adapts based on artifacts visited, personalizing the experience. 2 Contents Contents........................................................................................................................... 3 Figures..............................................................................................................................6 Introduction ……………………………………………......................................................... 9 Double Edged Swords In Europe………………………………………………………...21 The European Bronze Age Sword……………………………………………….21 Ancient edged weapons prior to the Bronze Age………………………..21 Uses of European Bronze Age swords, general trends, and common innovations
    [Show full text]
  • Spuhr 2021 Isms™ Catalog
    2021 SPUHR 2021 ISMS™ CATALOG IDEAL SCOPE MOUNT SYSTEM™ 1 ABOUT THIS CATALOG Thank you for your interest in our products! This catalog contains the full assortment of scope mounts and separate rings that make up the ISMS™ product family. The order of presentation is from the lowest mount with no tilt to the highest with maximum tilt from the smallest ring size/tube diameter to the largest. If you cannot find a specific mount you are looking for, and you have a special requirement to fill, we are able to provide mounting solutions outside of our normal product range in this catalog. Such projects do require a minimum volume of 50 units. To make this catalog as universal as possible it does not contain any prices, but we have included all measurements and the weights of the products when mounted. We hope you will find this catalog to your liking and we welcome any feedback you may have. If you want to see more of our capabilities, please visit our website www.spuhr.com or www.spuhr.biz. Yours sincerely, Håkan Spuhr 2 CONTENT ABOUT THIS CATALOG ........................................................................................... 1 ABOUT ISMS ........................................................................................................... 3 PICATINNY MOUNTS .............................................................................................. 4 30 mm Unimounts .................................................................................................. 4 34 mm Unimounts .................................................................................................
    [Show full text]
  • Ar15 Semi—Automatic Instruction/ Safety Manual Caution
    AR15 SEMI—AUTOMATIC INSTRUCTION/ SAFETY MANUAL CAUTION: USE ONLY CLEAN, DRY, ORIGINAL, HIGH QUALITY COMMERCIALLY MANUFACTURED AMMUNITION IN GOOD CONDITON which is appropriate to the caliber of your firearm. We do not recommend the use of remanufactured or hand loaded ammunition because it may cause severe damage to yourself and/ or your rifle. Page 1 SECTION 1 PRECAUTIONS READ AND UNDERSTAND ALL THE FOLLOWING PRECAUTIONS BEFORE REMOVING THIS FIREARM FROM ITS PACKAGE. ! WARNING: IF THIS FIREARM IS CARELESSLY OR IMPROPERLY HANDLED, UNINTENTIONAL DISCHARGE COULD RESULT AND COULD CAUSE INJURY, DEATH, OR DAMAGE TO PROPERTY. CAUTION: PRIOR TO LOADING AND FIRING, CAREFULLY READ THIS INSTRUCTION MANUAL WHICH GIVES BASIC ADVICE ON THE PROPER HANDLING AND FUNCTIONING OF THIS RADICAL FIREARMS SYSTEM. However, your safety and the safety of others (including your family) depends on your mature compliance with that advice, and your adoption, development and constant employment of safe practices. If unfamiliar with firearms, seek further advice through safe handling courses run by your local gun clubs, NRA approved instructor, or similar qualified organizations. Page 2 NOTICE: Radical Firearms shall not be responsible for injury, death, or damage to property resulting from either intentional or accidental discharge of this firearm, or from its function when used for purposes or subjected to treatment for which it was not designed. Radical Firearms will not honor claims involving this firearm which result from careless or improper handling, unauthorized adjustment or parts replacement, corrosion, neglect, or the use of wrong caliber ammunition, or the use of ammunition other than original high quality commercially manufactured ammunition in good condition, or any combination thereof.
    [Show full text]
  • Manson Precision Receiver Accurizing System
    Manson Precision Receiver Accurizing System Rhomboidal and pavid Slim reinterred her sundries feign or municipalizes estimably. Bewhiskered and dorsiventral Shurlock often disorientates some suspiration jeopardously or gumshoe therapeutically. Toothsome Ned sometimes climb-downs any hypogyny objectivize thriftily. Austenite molecular structure in receiver accurizing your order to impact forging die was attached to It has a receiver accurizing and precision machined hand when needed. National Match Rifle, Serial No. Ups For Remington Centerfire Rifles MAGAZINE CLIP is best carrying cases for extra ammo; they spoke right knowledge the gun. Available in precision manufacturing, deeply serrated face! Winchester receiver accurizing system and precision receiver, butt plate screw only received and the systems, the barrel bore. Sold had designed by the receiver accurizing kit! If they are precision. Even directional change the receiver accurizing system for precise, fulton armory operating rod rail hand and flexibility. The replacement magazine followers should have three neat and evenly spaced spot welds attaching the stop to the follower. End to match category will enlarge due to. The magazines were rotated for even use and the rate of fire was measured during one of the twenty round bursts. It is precision receiver accurizing system was unable to do so you wont need to work was a manson. He fled to the jungle the same day. SPECS: Aluminum, anodized, red. The reamer has a FLOATING pilot that measures approx. Bush and receiver. SPECS: Stainless steel, belt finish. Tactical Forums discussion board www. Low maintenance, Parkerized finish resists corrosion and matches the rest of your rifle. This corn is therefore excellent turnover and fluctuate barely ever used.
    [Show full text]
  • Art of Precision
    2017 CATALOGUE ART OF PRECISION «Promtechnologia» (Industrial Technology) company directs careful attention to its products’ quality which allows it to gain some impressive results: Orsis rifles’ accuracy exceeds their most common counterparts’ results greatly. This reality is confirmed by the multiple winning scores of shooters participating in high-accuracy shooting international competitions with their Orsis rifles in hands. There is a parameter in ballistics called “minute of angle” (or MOA) which estimates accuracy of shooting and it is defined, as a rule, by a group of 3-5 shots. Rifles having MOA ratio less than 1 are called sniper rifles. «Promtechnologia» company guarantees that all Orsis rifles demonstrate accuracy not over 0.5 MOA and a number of models demonstrate even better performance. www.orsis.com 3 President’s Message 4 Orsis Special 6 Orsis SE T-5000 M 8 Orsis M-15 Carbine 12 Orsis AR-10 National Match 16 Orsis Hunting 20 Orsis 120/140 22 Orsis SE Hunter M 26 Orsis SE Alpine M 30 Marocchi Si12 / Walnut 34 T-5000 / 8-11 120/140 / 22-25 Varmint / 48-51 Marocchi Si12 / Plastic 36 Marocchi First-E 40 Marocchi First-E Deluxe 42 Orsis Sport 46 Orsis Varmint M 48 Orsis F-Class 52 Glock Pistols 54 M-15 / 12-15 Hunter / 26-29 F-Class / 52-53 Production 56 High-Technology Equipment 58 High-Precision Technologies 59 Exceptional Materials 60 Innovative Development 61 International Cooperation 61 AR-10 / 16-19 Alpine / 30-33 Glock / 54-55 Services 62 Rifle Barrels Replacement 63 Cerakote Coating Application 63 Technical Maintenance 64 Decoration & Engraving 65 Orsis Сustom 65 Dealer Network 66 Marocchi / 34-45 Contacts 66 HIGH-PRECISION FIREARMS SYSTEMS ORSIS 4 ORSIS ART OF PRECISION President’s Message 5 Dear friends! The first catalogue of «Promtechnologia» (Industrial Technology) We support our shooters’ aspiration to be the best hunters and company is now introduced for your kind attention and, as you will sportsmen.
    [Show full text]
  • Summary Description Semi-Automatic Sporting Rifle SIG-AMT Cal
    - Summary Description Semi-Automatic Sporting Rifle SIG-AMT cal. 7.62x51 mm (.308 Win.) Swiss Industrial Company CH- 8212 Neuhausen Rhine Falls/Switzerland Phone 053/81555 Telex 76156 sig ch - 3 - Contents l. Weapon theory Page l.l. Designation and purpose 5 1.2. Main components and accessories 6- 7 1.3. Dismantling and assembly 9 1.4. Cleaning and maintenance ll 1.5. Functional checks 12 2. Manipulation 2.1. Loading, reloading, unloading 13-14 2.2. Positions of firing, using normal ammunition 14 2.3. Sight adjustments 16 3. Technical data 17-18 - 4 - - 5 - l. Weapon theory 1.1. Designation and purpose The semi-automatic sporting rifle SIG-AMT is a delayed blow-back weapon with stationary barrel and semi-rigid breech. The cartridges are fed from magazines of 5, 10 or 20 rounds. A considerably reduced recoil and the bipod which lends the rifle a firm support, improves accuracy of aim in all types of fire. Next to the normal trigger, in latched neutral position, is a winter trigger. This can be un­ latched and shifted into engagement to allow firing in mittens. In the head of the breech casing is a loading indicator, affording a visual check as to whe­ ther the weapon is loaded or unloaded. - 6 - - 7 - 1.2. Main components Accessories The principal parts of the weapon are: - Magazines for 5, 10 or 20 rounds - Barrel, bolted firmly to the breech casing. - Sling Pull-through with string and wire brush Breech casing with 2 lock heads, carrying - Loading indicator holder handle, loading indicator, bolt, rear sight and cartridge ejector opening.
    [Show full text]
  • CASV Handguard for the FAL Rifle Note: the CASV-FAL System Will Not Fit on Rifles Using the G1 Or Similarly Profiled Barrels
    CASV Handguard for the FAL Rifle Note: The CASV-FAL System will not fit on rifles using the G1 or similarly profiled barrels Improper installation can result in damage. Do not attempt installation if you are not familiar with the firearm, tools and techniques mentioned. You are responsible for any damage or READ injury resulting from the improper use THIS! or installation of this product. Ensure the rifle is CLEAR and SAFE! Before installation, read Instructions, Warnings and Notes. NOTE: Make sure that the firearm is unloaded and safe before proceeding – if you are unsure of how, or uncomfortable with the proper clearing and safe handling of the firearm, do not proceed! We recommend that the installation of this part be done only by a qualified gunsmith or agency armorer. 1. Before proceeding, please inspect the handguard assembly and hardware to ensure that you are familiar with all of the parts. 1 - Upper handguard Assembly 2 - Lower handguard Assembly 3 - Forward mounting screw retaining clip 4 - Forward mounting screw 5 - Rear mounting cross screw 6 - Rear mounting clamping nut 7 - Upper Handguard retaining screws (6 for FAS, 8 for FAL) 8 - Picatinny Accessory Rails & Screws 2. Install the lower handguard section by sliding it over the front sight gas block, and rearward over the handguard retainer. After the lower section is in place, install the forward mounting screw from the right side of the handguard, ensuring that it goes through the front sight gas block. Note: only snug the screw enough to hold the lower handguard section in place. 3.
    [Show full text]
  • PM Crew Served Weapons Overview Small Arms Symposium & Exhibition
    TheThe Soldier:Soldier: America’sAmerica’s MostMost DeployedDeployed CombatCombat SystemSystem PM Crew Served Weapons Overview for the Small Arms Symposium & Exhibition National Defense Industrial Association 16-19 May 2006 BG James R. Moran COL Carl A. Lipsit Mr. Peter Errante Program Executive Officer Soldier PM Soldier Weapons Deputy PM Crew Served Weapons Crew Served Weapons 2 PM Soldier Weapons Programs List DEVELOPMENT WEAPONS PROCUREMENT Objective Individual Combat Weapon (OICW) 37. M101, CROWS, Remote Mount 1. OICW Increment I 38. M151E1 & M151E2 Protector Remote Wpn System (RWS) 2. OICW Increment II - XM25 Air Burst Weapon 39. MK19 Advanced Crew Served Weapons (ACSW) 40. Mod Kit 3. Advanced Crew Served Weapon (ACSW) Programs 41. Lightweight Adjustable Sight Bracket 42. Tactical Engagement Simulator (TES) SOLDIER ENHANCEMENT PROGRAMS 43. M107 Semi Automatic Long Range Sniper Rifle 4. XM26 - 12 Gauge Modular Accessory Shotgun System 44. M240B, 7.62mm Medium MG (MASS) 45. M240B Collapsible Buttstock 5. Joint Combat Pistol 46. M192, Light Weight Ground Mount For MG 6. Family of Small Arms Suppressors 47. Improved Bipod 7. M68 Close Combat Optics (Dual Source Qualification) 48. Improved Flash Suppressor 8. XM1068, 12 Gauge Non-Lethal Extended Range Round 49. Combat Ammunition Pack 9. XM1022, Sniper Ammunition for M107 50. M240B Short Barrel 10. XM110 - 7.62 Semi-Automatic Sniper System (SASS) 51. M240B Improved Buttstock 11. Close Quarters Battle Kit 52. Sling Assembly for the M240B 12. XM1041/XM1042/XM1071 - Close Combat Mission 53. Short Barrel Capability Kit 54. M249, 5.56mm Squad Automatic Weapon 13. Advanced Sniper Accessory Kit (ASAK) 55. M192, Lightweight Ground Mount For MG 14.
    [Show full text]
  • Assembly and Operations Guide
    BIPOD ® Assembly and Operations Guide For Model Numbers BXT-34X2 BXT-40X2 BXT-40X3 Patents Pending Before Several Jurisdictions WARNING: Read all warnings before attempting to install, use or service the Tilted Picatinny Rail system. CONSUMER INFORMATION Please read LEGAL WARNING before use. Read and understand all instructions. To Our Valued Customers, We are very pleased to welcome you to the Accuracy Solutions family of products with your purchase of BIPODEXT ™. Special care is required when working on or shooting a rifle. We encourage proper training and licensing before modifying or operating a firearm. Proper mounting and safe use of your BIPODEXT ™ is our wish but your responsibility. Thank you very much for your purchase and please enjoy this product safely. Sincerely, Accuracy Solutions LLC PLEASE PAY ATTENTION TO ALL WARNING AND CAUTION STATEMENTS WARNING statements are designed to alert you to the possibility of personal injury, loss of life, damage to the BIPODEXT ™ and/or personal property if the instructions are not followed. CAUTION statements are designed to alert you to the possibility of damage to BIPODEXT ™ or personal property if the instructions given are not followed. Accuracy Solutions LLC. All rights reserved. 2 Rev. 1.0, August 10, 2017 TABLE OF CONTENTS CONSUMER INFORMATION Warning and Caution Statements .............................pg. 2 Legal Warning .......................................................pg. 3 PARTS & HARDWARE .....................................pg. 4-5 ASSEMBLY Bipods that attach to a Sling Stud ............................pg. 6-7 Bipods that attach to a Picatinny Rail .........................pg. 7 Installing Tilted Picatinny Rail on a Hunting Rifle Method 1.) Drilling holes through forearm ................pg. 8-10 Method 2.) Installing Threaded Inserts .....................pg.
    [Show full text]
  • 2020 Product Catalog Tm
    TM 2020 PRODUCT CATALOG TM SENTRY Products Group. We Live to Protect! 2 We are proud to introduce our 2020 product assortment featuring new products, new categories and further expansion of our tactical nylon line. While the nylon line had seen steady growth, a visit from a key customer in the summer of 2019 changed the pace of our development creating a combination of lightweight and configurable components with the flexibility to meet changing mission demands. For the latest project check out the Gunnar Series Plate carrier featured on page 10. Along with our nylon line developments the hybrid Hexmag magazine which combined the best attributes of metal and polymer technologies was launched to support the Glock 17. Additional platforms are in the works as we continue to expand the Hexmag line up. Whether you protect your home, family, or country, our commitment to you is simple – we will continue to produce the best, most innovative product on the market to enhance your experience. We are so confident that we back each product with a hassle- free Lifetime Warranty, protecting your investment. From the team at SENTRY, thank you for your support and confidence. TABLE OF CONTENTS MAGAZINES . .4-7 ON GUN ACCESSORIES . 8-9 PLATE CARRIER AND ACCESSORIES . 10-13 BELTS AND POUCHES . 14-21 SLINGS. .22-23 OPTIC COVERS. .24-29 FIREARM COVERS . .30-33 CLEANING AND LUBRICATION. .34-39 BAGS. .40-41 OEM PROGRAMS. .42-43 3 When every round counts™ 4 ™ POLYHEX2 The proprietary advanced composite that all Hexmag magazines are made from delivers superior strength and reliable performance across the modern sporting rifle and pistol spectrum.
    [Show full text]
  • (12) United States Patent (10) Patent No.: US 7,121,034 B2 Keng (45) Date of Patent: Oct
    USOO7121034B2 (12) United States Patent (10) Patent No.: US 7,121,034 B2 Keng (45) Date of Patent: Oct. 17, 2006 (54) BPOD MOUNT AND GRIPASSEMBLY 6,487,807 B1 * 12/2002 Kopman et al. ............... 42.94 2005/0241206 A1* 11/2005 Teetzel et al. ................. 42.72 (76) Inventor: Da Keng, 875 Wharton Dr. S.W., Atlanta, GA (US) 30336 FOREIGN PATENT DOCUMENTS (*) Notice: Subject to any disclaimer, the term of this DE 103.108O2 A1 * 9, 2004 patent is extended or adjusted under 35 U.S.C. 154(b) by 0 days. * cited by examiner Primary Examiner J. Woodrow Eldred (21) Appl. No.: 11/056,134 (74) Attorney, Agent, or Firm Jones Tullar & Cooper, PC (22) Filed: Feb. 14, 2005 (57) ABSTRACT (65) Prior Publication Data A grip and bipod mounting device for mounting a bipod US 2005/O188588 A1 Sep. 1, 2005 Supporting grip assembly to a "picatinny’ mounting rail structure as are often affixed below the forearm stock of a Related U.S. Application Data firearm such as a military rifle (e.g., as per standard MIL STD-1913). In particular, the present invention is directed to (60) Provisional application No. 60/543,571, filed on Feb. mounting a Parker-Hale style of firearm bipod on a bipod 12, 2004. Supporting grip assembly including a contoured mounting (51) Int. C. block segment inletted to cover and attach to a picatinny rail affixed beneath the forearm stock of the firearm. A grip or F4 IC 23/00 (2006.01) handle depends transversely from the mounting block seg (52) U.S.
    [Show full text]