DOCSLIB.ORG

USER MANUAL AR15 STYLE RIFLES Barnes Precision Machine A2-Style Muzzle Device

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
USER MANUAL AR15 STYLE RIFLES Barnes Precision Machine A2-Style Muzzle Device INNOVATIVE REFINEMENTS TO THE TACTICAL CARBINE www.USAmade-AR15parts.com USER MANUAL AR15 STYLE RIFLES Barnes Precision Machine A2-Style muzzle device. Reduces muzzle blast and felt recoil, complete with breaching tip. MADE IN THE USA All Barnes Precision Machine rifles come standard with a stainless steel match grade barrel. Available in your choice of .223 Wylde or 5.56 NATO chambers and 11.5 to 18 inch lengths. Picatinny Spec Free-Float Rail System. Available in 7, 9, 12.5, and 14.5 inch lengths, featuring our patent pending enhanced barrel nut to achieve unprecedented rigidity for the length of the rail. Each rail system features four steel reinforced interchangeable sling swivel inserts. 7075 Forged Mil-spec CNC machined-hard anodized lower receiver with accurizing screw and detent set screw. Barnes Precision Machine © Copyright 2013 Patent Pending, All Rights Reserved Congratulations, you have purchased one of the finest rifles in the industry. Mil-spec machine tolerances. Manufactured on state of the art CNC machinery. Top quality materials-coating. All performed to ISO9001 standard. USA made craftsmanship and pride by skilled machinists in our North Carolina Facility. Innovative refinements to the tactical carbine OPERATING INSTRUCTIONS For safe operation instructions including Proper /Safe usage and /or maintenance, cleaning, repair, BPM Inc. recommends completion of a class by certified instructor (NRA/ NSSF, etc.) for training /operational understanding-proper, safe use of weapon system for tactical/personal defense/target/hunting as well as all other applications requiring basic understanding of said product(s) for SAFE /RELIABLE use/application of a LETHAL WEAPON. WARRANTY Due to the many different requirements imposed by federal and state laws on consumer warranties, no express warranty, either “full” or “limited” is offered with this product. BPM Inc. Implied warranties, including the implied warranty of merchantability and fitness for a particular purpose, are limited in duration to one year from the date of purchase. BPM Inc. will not cover normal wear and tear or abuse. Some states do not allow limitations on how long implied warranty lasts, so this limitation may not apply to you. Decision on Parts replacement is up to BPM Inc. - after return of part / inspection of part/assembly. BPM Inc. reserves the right to disallow replacement of parts, based on neglect/abuse of said products by end user, pending review /inspection at our plant/facility. All parts/items/assemblies found after inspection to be defective /improperly manufactured will be replaced/returned at no cost to customer. WARNING: Observe safe firearm handling practices at all times! Make sure the weapon is unloaded and the safety engaged! IMPROPER INSTALLATION AND/OR IMPROPER USE OF THIS PRODUCT MAY CAUSE WEAPON MALFUNCTION. WEAPON MALFUNCTION MAY CAUSE SERIOUS INJURY, INCLUDING DEATH AND/OR BODILY HARM Neither Barnes Precision Machine, Inc. nor its affiliates will be held responsible for improper use or improper installation of this product. Proper installation and use modifies the weapon and its operational procedures. Verify proper installation and practice use extensively before entering a tactical or other live fire situation. Failure to do so is legal recklessness on the part of the user. REMEMBER: NEVER POINT THE BARREL OF YOUR WEAPON AT ANYTHING YOU DO NOT WANT TO DESTROY. Barnes Precision Picatinny Spec Free Float Rail The patent pending design of the considerably longer length barrel nut over what has been conventionally available ,coupled with hand guard to barrel nut retention via QD sling swivel insert is remarkably one of the toughest/most rigid in existence. Length of barrel nut offers unequalled rigidity under leverage induced sling wrap up –strain-especially for longer / full length rail type hand guard designs, for effective/repeatable mounting of a variety of different optics/lasers/light accessories. PICATINNY SPEC QUAD RAIL ENHANCED BARREL NUT STEEL REINFORCED INTERCHANGEABLE SLING SWIVEL INSERT To install or remove correctly, user must be familiar with common Armorers tools used in assembly/disassembly of M-16/AR-15 weapon system and have the skills necessary to use them. Use of “Service removable Blue LocTite” on all fasteners is recommended. UNLOAD WEAPON It is users responsibility to make sure weapon is unloaded and in safe condition!!! BPM INC will not be responsible for any loss, injury or death resulting from the use or misuse of this product. 1. Use vise /upper receiver Armorers block –barrel nut wrench to remove GI style barrel nut/delta ring assembly. 2. Install Barnes Precision Machine Inc. Barrel Nut with radial groove. 3. Torque barrel nut with BPM Inc. barrel nut wrench to 85ft. lbs. 4. Reinstall gas tube assembly/gas block. 5. While upper is still in Armorers block, Install jack screw (10-32 cap head screw) in bottom of hand guard to open up clamp area to make it easier to slide hand guard onto barrel nut. With 2 rear sling swivel inserts removed from BPM Inc. Free Float Rail, slide rail system on to barrel nut ,maintaining alignment of lug/ recess area on bottom and on top of rail –this lug/ recess area on upper receiver end of hand guard, should fit around upper receiver. Picatinny spec rail on upper receiver and hand guard should align with each other as they come together .This lug/recess area is what keeps hand guard from rotating or loosening barrel nut once in place and tightened up against upper receiver. Once in place remove 10-32 jack screw. Install 10-32 allen head cross bolts and allen nuts thru holes over clamp/slot area on bottom of hand guard– tighten both screws finger tight. 6. Install QD sling swivel disconnect inserts into threaded holes on each side of barrel nut area on hand guard. Torque QD sling swivel inserts on each side to 35 inch pounds. 7. Torque clamp screws to 25 inch pounds. CAUTION: Do not distort/over tighten screws! Slot in clamp area on underside of hand guard should not “close up”. 8. Re-Check alignment of Picatinny spec rail on hand guard with Picatinny spec rail on upper receiver. 9. Congratulations, you have successfully completed installation of hand guard! BARNES PRECISION AR15 PARTS DIAGRAM CARBINE GAS TUBE THERMOSET HANDGUARD HANDGUARD CAP HAND GUARD SNAP RING WELD SPRING FRONT SIGHT POST DELTA RING FRONT SIGHT DETENT BARREL INDEXING PIN FRONT SIGHT DETENT SPRING BARREL EXTENSION GAS TUBE ROLL PIN BARREL NUT FRONT SIGHT BASE WITH BAYONET LUG THERMOSET HANDGUARD BARREL SUBASSEMBLY CRUSH WASHER FLASH SUPPRESSOR FRONT SIGHT TAPER PINS (2) FRONT SLING SWIVEL FRONT SLING SWIVEL RIVET CHARGING HANDLE LATCH ROLL PIN CHARGING HANDLE LATCH CHARGING HANDLE LATCH SPRING CHARGING HANDLE FIRING PIN BOLT CARRIER KEY SCREW (2) BOLT CARRIER KEY PAWL DETENT FORWARD ASSIST PLUNGER PAWL SPRING FORWARD ASSIST FIRING PIN RETAINING PIN SPRING PIN CAM PIN PAWL SPRING PIN BOLT CARRIER FORWARD ASSIST PAWL FORWARD ASSIST SPRING EJECTION PORT COVER PIN EXTRACTOR PIN EJECTION PORT COVER SPRING EJECTOR ROLL PIN BOLT GAS RINGS (3) EJECTION PORT COVER BOLT EJECTOR UPPER SPRING RECEIVER EXTRACTOR SPRING EXTRACTOR SPRING INSERT RING, EXTRACTOR RETAINING COVER EJECTOR CAR. BUFFER SPRING BUFFER RETAINER HAMMER WITH J PIN BUFFER RETAINER 6 POSITION HAMMER SPRING CARBINE RECEIVER EXTENSION SAFETY SELECTOR LEVER BUFFER ASSEMBLY BOLT CATCH BOLT CATCH ROLL PIN BOLT CATCH PIN, BUTTSTOCK PLUNGER SLIDE LOCK BOLT CATCH RECEIVER TAKEDOWN PIN SPRING EXTENSION SPRING F LOCKPIN SPRING NUT TAKEDOWN PIN DETENT I R E MAGAZINE S A COLLAR, TAKEDOWN PIN F E CATCH BUTTSTOCK TUBE LOCK SAFETY DETENT PIVOT PIN SAFETY DETENT SPRING DETENT PIVOT PIN SPRING PIVOT PIN TRIGGER GUARD PIVOT DISCONNECTOR SPRING ROLL PIN TELESTOCK PISTOL GRIP LATCH DISCONNECTOR ROLL PIN MAGAZINE LOCKPIN NUT LOCK WASHER CATCH TRIGGER PISTOL GRIP SCREW SPRING TRIGGER GUARD ASSEMBLY TRIGGER SPRING MAGAZINE HAMMER AND RELEASE TRIGGER PINS BUTTON WARNING: Observe safe firearm handling practices at all times! Make sure the weapon is unloaded and the safety engaged! IMPROPER INSTALLATION AND/OR IMPROPER USE OF THIS PRODUCT MAY CAUSE WEAPON MALFUNCTION. WEAPON MALFUNCTION MAY CAUSE SERIOUS INJURY, INCLUDING DEATH AND/OR BODILY HARM Neither Barnes Precision Machine, Inc. nor its affiliates will be held responsible for improper use or improper installation of this product. Proper installation and use modifies the weapon and its operational procedures. Verify proper installation and practice use extensively before entering a tactical or other live fire situation. Failure to do so is legal recklessness on the part of the user. REMEMBER: NEVER POINT THE BARREL OF YOUR WEAPON AT ANYTHING YOU DO NOT WANT TO DESTROY. CQB PATROLMAN’S CARBINE DESIGNATED MARKSMAN RIFLE TACTICAL MATCH CARBINE INNOVATIVE REFINEMENTS TO THE TACTICAL CARBINE 1434 FARRINGTON ROAD, APEX, NC 27523-5728 [email protected] 919-362-6805 www.BarnesPrecision.com BPMUM223.
Load more

Recommended publications
  • Instruction for Vector Optics Tactical Bipod Mounts ATTENTION: Make Sure Firearm Is Unloaded Universal Picatinny Style
    Instruction for Vector Optics Tactical Bipod Mounts ATTENTION: Make sure firearm is unloaded Universal Picatinny Style Fit 21mm weaver and picatinny rail Press down the lockable button to open or folder the bipod Turn and release the leg sleeve, the spring loaded leg will be extended, then fasten the leg sleeve again To retract the leg, loosen the leg sleeve, push back the leg to the end, retighten the leg sleeve again Solid rubber feet avoid slipping With barrel mount adapter Stud Connection Style Stud connection mount for sling attachment Press the button to release the spring loaded leg If need to retract the extendable leg, just press the button again and push the leg back Solid rubber feet avoid slipping With weaver picatinny mount adapter. To use the adapter, remove the bipod tiny rubber sleeve, clamp into the adapter stud hole. Fasten the bottom nut. Swivel Stud Connection Style Swivel stud connection mount for sling swivel attachment Press the button to release the spring loaded leg 15 inch bipod, press first button and pull the extendable legs, press last button to release the spring loaded leg If need to retract the extendable leg, just press the button again and push the leg back Solid rubber feet avoid slipping Weaver picatinny mount adapter. To use the adapter, remove the bipod tiny rubber sleeve, clamp into the adapter stud hole. Fasten the bottom nut. Swing-able design for leveling on uneven ground. Select proper angle and fasten thumb nut to lock the position www.scvector.biz www.scvector.com .
    [Show full text]
  • Manson Precision Receiver Accurizing System
    Manson Precision Receiver Accurizing System Rhomboidal and pavid Slim reinterred her sundries feign or municipalizes estimably. Bewhiskered and dorsiventral Shurlock often disorientates some suspiration jeopardously or gumshoe therapeutically. Toothsome Ned sometimes climb-downs any hypogyny objectivize thriftily. Austenite molecular structure in receiver accurizing your order to impact forging die was attached to It has a receiver accurizing and precision machined hand when needed. National Match Rifle, Serial No. Ups For Remington Centerfire Rifles MAGAZINE CLIP is best carrying cases for extra ammo; they spoke right knowledge the gun. Available in precision manufacturing, deeply serrated face! Winchester receiver accurizing system and precision receiver, butt plate screw only received and the systems, the barrel bore. Sold had designed by the receiver accurizing kit! If they are precision. Even directional change the receiver accurizing system for precise, fulton armory operating rod rail hand and flexibility. The replacement magazine followers should have three neat and evenly spaced spot welds attaching the stop to the follower. End to match category will enlarge due to. The magazines were rotated for even use and the rate of fire was measured during one of the twenty round bursts. It is precision receiver accurizing system was unable to do so you wont need to work was a manson. He fled to the jungle the same day. SPECS: Aluminum, anodized, red. The reamer has a FLOATING pilot that measures approx. Bush and receiver. SPECS: Stainless steel, belt finish. Tactical Forums discussion board www. Low maintenance, Parkerized finish resists corrosion and matches the rest of your rifle. This corn is therefore excellent turnover and fluctuate barely ever used.
    [Show full text]
  • Summary Description Semi-Automatic Sporting Rifle SIG-AMT Cal
    - Summary Description Semi-Automatic Sporting Rifle SIG-AMT cal. 7.62x51 mm (.308 Win.) Swiss Industrial Company CH- 8212 Neuhausen Rhine Falls/Switzerland Phone 053/81555 Telex 76156 sig ch - 3 - Contents l. Weapon theory Page l.l. Designation and purpose 5 1.2. Main components and accessories 6- 7 1.3. Dismantling and assembly 9 1.4. Cleaning and maintenance ll 1.5. Functional checks 12 2. Manipulation 2.1. Loading, reloading, unloading 13-14 2.2. Positions of firing, using normal ammunition 14 2.3. Sight adjustments 16 3. Technical data 17-18 - 4 - - 5 - l. Weapon theory 1.1. Designation and purpose The semi-automatic sporting rifle SIG-AMT is a delayed blow-back weapon with stationary barrel and semi-rigid breech. The cartridges are fed from magazines of 5, 10 or 20 rounds. A considerably reduced recoil and the bipod which lends the rifle a firm support, improves accuracy of aim in all types of fire. Next to the normal trigger, in latched neutral position, is a winter trigger. This can be un­ latched and shifted into engagement to allow firing in mittens. In the head of the breech casing is a loading indicator, affording a visual check as to whe­ ther the weapon is loaded or unloaded. - 6 - - 7 - 1.2. Main components Accessories The principal parts of the weapon are: - Magazines for 5, 10 or 20 rounds - Barrel, bolted firmly to the breech casing. - Sling Pull-through with string and wire brush Breech casing with 2 lock heads, carrying - Loading indicator holder handle, loading indicator, bolt, rear sight and cartridge ejector opening.
    [Show full text]
  • CASV Handguard for the FAL Rifle Note: the CASV-FAL System Will Not Fit on Rifles Using the G1 Or Similarly Profiled Barrels
    CASV Handguard for the FAL Rifle Note: The CASV-FAL System will not fit on rifles using the G1 or similarly profiled barrels Improper installation can result in damage. Do not attempt installation if you are not familiar with the firearm, tools and techniques mentioned. You are responsible for any damage or READ injury resulting from the improper use THIS! or installation of this product. Ensure the rifle is CLEAR and SAFE! Before installation, read Instructions, Warnings and Notes. NOTE: Make sure that the firearm is unloaded and safe before proceeding – if you are unsure of how, or uncomfortable with the proper clearing and safe handling of the firearm, do not proceed! We recommend that the installation of this part be done only by a qualified gunsmith or agency armorer. 1. Before proceeding, please inspect the handguard assembly and hardware to ensure that you are familiar with all of the parts. 1 - Upper handguard Assembly 2 - Lower handguard Assembly 3 - Forward mounting screw retaining clip 4 - Forward mounting screw 5 - Rear mounting cross screw 6 - Rear mounting clamping nut 7 - Upper Handguard retaining screws (6 for FAS, 8 for FAL) 8 - Picatinny Accessory Rails & Screws 2. Install the lower handguard section by sliding it over the front sight gas block, and rearward over the handguard retainer. After the lower section is in place, install the forward mounting screw from the right side of the handguard, ensuring that it goes through the front sight gas block. Note: only snug the screw enough to hold the lower handguard section in place. 3.
    [Show full text]
  • Experimentation in Sling Weaponry: Effectiveness of and Archaeological Implications for a World-Wide Primitive Technology
    University of Nebraska - Lincoln DigitalCommons@University of Nebraska - Lincoln Anthropology Department Theses and Dissertations Anthropology, Department of 4-2013 Experimentation in Sling Weaponry: Effectiveness of and Archaeological Implications for a World-Wide Primitive Technology Eric T. Skov University of Nebraska-Lincoln, [email protected] Follow this and additional works at: https://digitalcommons.unl.edu/anthrotheses Part of the Anthropology Commons Skov, Eric T., "Experimentation in Sling Weaponry: Effectiveness of and Archaeological Implications for a World-Wide Primitive Technology" (2013). Anthropology Department Theses and Dissertations. 30. https://digitalcommons.unl.edu/anthrotheses/30 This Article is brought to you for free and open access by the Anthropology, Department of at DigitalCommons@University of Nebraska - Lincoln. It has been accepted for inclusion in Anthropology Department Theses and Dissertations by an authorized administrator of DigitalCommons@University of Nebraska - Lincoln. Experimentation in Sling Weaponry: Effectiveness of and Archaeological Implications for a World-Wide Primitive Technology by Eric Skov A THESIS Presented to the Faculty of The Graduate College at the University of Nebraska In Partial Fulfillment of Requirements For the Degree of Master of Arts Major: Anthropology Under the Supervision of Professor LuAnn Wandsnider Lincoln, Nebraska May, 2013 EXPERIMENTATION IN SLING WEAPONRY: EFFECTIVENESS OF AND ARCHAEOLOGICAL IMPLICATIONS FOR A WORLD- WIDE PRIMITIVE TECHNOLOGY Eric Thomas Skov, M.A. University of Nebraska, 2013 Adviser: LuAnn Wandsnider The sling is a simple, cheap and effective weapon that was widely distributed among prehistoric and historic populations. Well-known archaeological and textual evidence attests to its widespread military usage in Europe, South America and Central America. However, ethnographic and archaeological evidence also suggest that the sling was widely distributed among Native American populations.
    [Show full text]
  • Universal Featherweight Bipod
    UNIVERSAL FEATHERWEIGHT BIPOD FitS: Any Firearm with a Sling Swivel Stud and AR-15 Types INSTALLATION INSTRUCTIONS PART# BIP0300 MAKE SURE YOUR FIREARM IS UNLOADED BEFORE STARTING! UNIVERSAL BIPOD ASSEMBLY: INSPECT EXISTING SLING SWIVEL STUD FOR TIGHTNESS! NON-SWIVEL SWIVEL Mounting O-Ring Bracket (Swivel Only) (See Step #9) Depress “Snap-n-Lock” button to fold Non-Swivel legs forward, OR IMPORTANT: Collar down or (See Step #10) Fits AR-15 with ROUND Mil Spec Yoke Assembly rearward Twist knurled knob Swivel Collar Handguards Without Modification. Halves to extend, retract M-4 Requires Additional Hole. or lock legs Fits any Rifle with Sling Swivel Stud OR Assemble Universal Bipod: Counterbore Washer Flat Top Washer 1. After deciding to build non-swivel or swivel bipod, position mounting bracket as shown in picture at right, install either the non-swivel collar or the swivel collar in the assembly. #10 x 3/4 Screws 2. Install non-swivel collar or swivel collar halves onto top side of mounting bracket with Thick Thick pins aligning with holes in mounting bracket. Washer Washer 3. If swivel collar halves were used, place o-ring into groove on top side of mounting bracket. Left Leg Right Leg 4. Install yoke assembly over post on mounting bracket and align (2) pins on bottom of yoke with holes in non-swivel collar or in open area between swivel collar halves. 5. Install washer over the post and secure with the pink pre-coated #10 x 3/4 screw using a Phillips screw driver. NOTE: Non-swivel Bipod will use the washer with the counterbore INSTALLING BIPOD TO RIFLE: top and Swivel Bipod will use the washer with the flat top.
    [Show full text]
  • Fabdefence.Pdf
    2012 2-15 grips 16-29 rail systems 30-33 K-pos 34-45 Buttstocks 46-53 TACTICAL FLASHLIGHT ADAPTORS 54-59 Magazine accessories 60-69 parts & upgrades 70-71 Self-Healing Targets 72 index gripsTarget Accuracy AG-43 AGF-43S AR15/M16 Pistol Grip Tactical Folding Pistol Grip for-M16-M4-AR15 Finger Swelts and a Backstrap Shape Designed to Enhance Transforms a Horizontal Positioned Grip to Vertical Position Grip, Even when Wet Weapon Fits Easier in Gun Case and on Weapon Rack Extended Beavertail for Better Control, Allowing a Higher Firmer Hold Provides Easier Maneuverability, more Convenient for Undercover Readily Accessible Storage Area with Securely Sealed Hinged Door Work and Concealment MIL-SPEC Reinforced Polymer Composite Easier and Faster Vehicular Deployment Available in Black and Two Camouflage Colors: Olive Drab Green and Desert Tan Quick Fold/Unfold Button Made From Reinforced Polymer Composite 04 Grips AG-47 AG-58 SG-1 Ergonomic Pistol Grip for AK-47/74 SA. VZ. 58 Pistol Grip Sniper Pistol Grip Advanced Ergonomic Design Prevents Unique Texture Prevents Slipping Replaces Standard Pistol Grip To Provide Wrist Fatigue and Ensures Secure Grip in When Wet Greater Comfort and Operational Control Wet Conditions Advanced Ergonomic Design Advanced Ergonomic Design Improves Trigger Operation Built-In Storage Compartment Adjustable Palm Swell Style Grip Built-In Storage with Removable Enhances Finger to Trigger Correspondence Adapts Easily To Various Sized Hands Cushioned Battery Holder Tough Material & Design Applies Pressure to the Palm of the Hand Manufactured with MIL-SPEC Reinforced Available in Black and Two Camouflage Allowing Deliberate and Measured Polymer Composite Colors: Olive Drab Green, and Desert Tan Trigger Pull Available in Black and Two Camouflage Tough Material & Design Colors: Olive Drab Green, and Desert Tan Available in Black 05 Grips agr-870 agm-500 wg-1911 Remington 870 Pistol Grip Mossberg 500 Pistol Grip 1911 Mag.
    [Show full text]
  • Product Catalog ® Company Overview Samson Manufacturing Is the Premier Manufacturer of Rearms Parts and Accessories
    ® ATM FOLDING STOCK for the Ruger® Mini-14® BTM FOLDING STOCK for the Ruger® 10/22™ Product Catalog ® Company Overview Samson Manufacturing is the premier manufacturer of rearms parts and accessories. Specializing primarily in the AR-15 market, Samson also has a diverse and accomplished product line including: Kalashnikov handguards, optics and magni er mounts, xed and folding ri e sights, and much, much more. Samson utilizes state of the art engineering and CNC machining techniques to ensure that all of our products not only exceed industry standards but set them. Located in Keene, NH and bringing to the table more than 24 years of design build experience, Samson Manufacturing is the only choice for retail customers, rearms manufacturers with specialized project needs, and distributors looking for excellent selection and extremely high cost/value. Samson serves retail customers and dealers directly and through a wide variety of distribution channels. OEM projects and custom design builds are handled directly by Samson’s product development team and we welcome the opportunity to prototype and produce custom, precision machined, CNC Scott W. Samson, President aluminum or plastic injection molded products to meet your company’s unique demands. Samson Manufacturing Samson is also heavily invested in the competition, Law Enforcement, and military Cathy Samson, President Samson International communities. We currently sponsor a professional shooting team with appearances on the 3 gun nation pro tour. Samson holds several U.S. military contracts with units in every branch of the armed forces as well as USSOCOM. Samson is also the supplier of the rear sights for the I.D.F.
    [Show full text]
  • 2020 Product Catalog American Defense Manufacturing Is a Leader in Contents Mounting Solutions for a Variety of Optics, Lights, Lasers and Accessories for Firearms
    2020 Product Catalog American Defense Manufacturing is a leader in Contents mounting solutions for a variety of optics, lights, lasers and accessories for firearms. The proprietary Quick Disconnect Auto Lock system is unrivaled when 3-4 New Products it comes to locking, adjustable quick disconnect 5-8 Optics mounts and is the backbone of ADM. 9-10 Optic Packages In 2015, ADM proudly introduced the Universal 11 Mount Introduction Improved Carbine (UIC), one of the finest lines of AR-15 style rifles offering true, fully ambidextrous 12 QD Autolock controls and overbuilt components. 13-18 Red Dot Mounts Today, American Defense Mfg capitalized on their 19-26 Magnified Scope Mounts mount and firearm experience to develop a unique 27 Accessory Mounts line of optics designed specifically for the AR15 but 28 Bipod Mounts ideal for shotguns, subguns, muzzleloaders and more. 29-30 Light Mounts Welcome to American Defense 2020. 31-32 Miscellaneous Mounts 33-34 Non-QD GI Bolt Mounts 35-38 Legacy Lever Mounts 39-46 Rifle Systems 47-49 Rifle Components 50 Information TIONAL N LY E T N I R S I O U P E R This commercial marketing catalog does not contain technical data whose export is restricted by the Arms Export Control Act or International Traffic in Arms Regulations. All information is subject to change without notice. NEW PRODUCTS NEW PRODUCTS ADM PRC-700SA Chassis New ADM Mounts The new ADM PRC-700SA chassis is designed with the precision rifle competitor in mind. Accepting common AICS magazines, this chassis is engineered with features and components that will help you make successful shots from the most dynamic or improvised positions.
    [Show full text]
  • Rings & Bases 258-278
    WEIGAND COMBAT RINGS & BASES INDEX ® HANDGUN SCOPEMOUNTS RUGER SINGLE SIX - No-drill, no-tap Fitting & Custom Components........ 278 Rifle.......................... 259-278 mount attaches to frame at the rear TAURUS TRACKER SCOPE MOUNT - Precision-machined, alu- sight screw. Contoured recoil lug fits Handgun ...................... 258-259 Shotgun............................ 259 minum scope mount accepts in rear sight slot to prevent movement. Weaver-style rings to let you Accepts Weaver-style rings. Use on .22 mount a scope on your Taurus LR only, not for use on .32 Magnum guns. ab 1 Tracker. Also great for red-dot SPECS: Extruded aluminum, black or silver, anodized, matte finish. 4 /2" 7 optics. Integral recoil lug fits (11cm) long, /8" (22mm) wide, 1.3 oz. (38 g) wt. Includes mounting screws. into rear sight notch for a rock #957-000-043 Silver Single Six Mount, 7E33L29 . $ 36.99 ALLCHIN S & W R E V O LV E R M I N I S T S LSP S&W 41 LONG SCOPE BASE solid hold that prevents scope movement. Requires removing rear #957-000-042 Black Single Six Mount, 7E33F29 . 36.99 sight. No drilling or tapping required. ab RINGS & BASES 1 5 SCOPE MOUNT SPECS: Aluminum, silver, matte finish. 4 /2" (11.4cm) long, /16" (7.8mm) high S&W REVOLVER - Low profile and Extra Long For from bottom to top of mount. 1.3 oz. (36.8g) weight. Includes mounting Precise Eye Relief lightweight. Fits newer, factory drilled Mount A Mini Red Dot On Any screws. Fits .22 LR, .22 Mag, .17 HMR. and tapped K, L and N frame revolvers; Pre-Drilled S&W Revolver Six inch long rail lets #957-000-076 Tracker Scope Mount, 7E32B29 .
    [Show full text]
  • VLTOR's Keymod™ Accessories
    Installation Instructions for VLTOR’s KeyMod™ Accessories VLTOR Weapon Systems Phone: 520-408-1944 3735 N. Romero Road Fax: 520-293-8807 Tucson, Arizona 85705 Email: [email protected] Improper installation can result in damage. Do not attempt installation if your are not familiar with the firearm, tools and techniques involved. You are responsible for any damage or injury resulting from the improper use or installation of this product. Copyright 2014 - VLTOR Weapon System, all rights are reserved. These instructions apply to all of VLTOR’s KeyMod™ Grip Panels, Rail Sections and QD Mounts, including the following: • KM-RAILSKeyMod™ Rail Kit • KM-SR9 KeyMod™ Slimline Single • KM-RAIL2KeyMod™ 2” Rail Section Rail 9” Grip Panel • KM-RAIL4KeyMod™ 4” Rail Section • KM-DR12KeyMod™ Slimline Double • KM-RAIL6KeyMod™ 6” Rail Section Rail 12” Grip Panel • KM-MG6KeyMod™ Modular 6” • KM-QDF KeyMod™ Quick Detachable Grip Panel Sling Swivel Mount, Rotational • KM-MG8KeyMod™ Modular 8” • KM-QDLKeyMod™ Quick Detachable Grip Panel Sling Swivel Mount, Anti-Rotational ****** ALWAYS ENSURE THAT THE FIREARM IS UNLOADED PRIOR TO ****** ****** INSTALLATION****** 1. With the screws loosened but not removed, place the mount onto the handguard section desired. Drop the screws into the large end of the KeyMod™ slot. The foot of the KeyMod™ screw will be facing the small end of the KeyMod™ slot. 2. Slide the mount forward until it stops. Press down on the mount to ensure it is flush to the handguard and tighten down the screws. Installation Tips • When installing multiple KeyMod™ accessories, start with the forward most accessory. • Note- the KM-QDF will not install into the forward most position.
    [Show full text]
  • SMITH-WESSON.COM M&P 15 SPOR T II RIFLES ™ See M&P®15
    8 WIN 30 HISPER W 00 3 IN m NAT 308 W 6m O .5 5 R 3 PE • 6-Position, Adjustable Stock 00 WHIS ® ® • Magpul MBUS Rear Sight O T 5. A • Forged, Integral Trigger Guard 56 mm N • Forward Assist & Dust Cover II RIFLES M&P 15 SPORT • Chromed Firing Pin DMO REE OR ® MODEL SKU ® C • Armornite Finish on Barrel - Interior and Exterior .5 M&P®15 SPORT™ II 10202 6 5.56mm NATO/223 REM R ® O 30 Round PMAG 6 O .5 CREEDM 16” Threaded Barrel, 1 in 9”, 6 Groove ™ SPECIFICATIONS 6.5 CREEDMOOR 8 WIN 30 HISPER W 00 3 IN m NAT 308 W 6m O .5 5 R • Fixed Stock E 30 SP • Magpul® MBUS® Rear Sight 0 WHI O T • Forged, Integral Trigger Guard 5. A 56 mm N • Forward Assist & Dust Cover • Chromed Firing Pin ® • Armornite Finish on Barrel - Interior and Exterior DMO MODEL SKU REE OR C .5 M&P®15 SPORT™ II 10203 COMPLIANT FOR SALE IN NJ 6 5.56mm NATO/223 REM R O 10 Round O 6.5 M 16” Barrel, 1 in 9”, 6 Groove CREED SPECIFICATIONS 6.5 CREEDMOOR SMITH-WESSON.COM 8 WIN 30 HISPER W 00 3 IN m NAT 308 W 6m O .5 5 R • 6-Position, Adjustable Stock 3 PE 00 WHIS • Magpul® MBUS® Rear Sight O T 5. A • Forged, Integral Trigger Guard 56 mm N • Forward Assist & Dust Cover MODEL SKU • Chromed Firing Pin ® DMO REE OR ® ™ • Armornite Finish on Barrel - Interior and Exterior C .5 M&P 15 SPORT II 11616 6 COMPLIANT FOR SALE IN CO 5.56mm NATO/223 REM 10 Round R O 6 O 16” Threaded Barrel, 1 in 9”, 6 Groove .5 CREEDM ® ™ SPECIFICATIONS See M&P 15 SPORT II Availability on Page 36 27 6.5 CREEDMOOR ® Built to perform for multiple uses and under various conditions, the M&P 15 rifl e forms the intersection between lightweight and rugged.
    [Show full text]