DOCSLIB.ORG

SMITH-WESSON.COM M&P 15 SPOR T II RIFLES ™ See M&P®15

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
SMITH-WESSON.COM M&P 15 SPOR T II RIFLES ™ See M&P®15 8 WIN 30 HISPER W 00 3 IN m NAT 308 W 6m O .5 5 R 3 PE • 6-Position, Adjustable Stock 00 WHIS ® ® • Magpul MBUS Rear Sight O T 5. A • Forged, Integral Trigger Guard 56 mm N • Forward Assist & Dust Cover II RIFLES M&P 15 SPORT • Chromed Firing Pin DMO REE OR ® MODEL SKU ® C • Armornite Finish on Barrel - Interior and Exterior .5 M&P®15 SPORT™ II 10202 6 5.56mm NATO/223 REM R ® O 30 Round PMAG 6 O .5 CREEDM 16” Threaded Barrel, 1 in 9”, 6 Groove ™ SPECIFICATIONS 6.5 CREEDMOOR 8 WIN 30 HISPER W 00 3 IN m NAT 308 W 6m O .5 5 R • Fixed Stock E 30 SP • Magpul® MBUS® Rear Sight 0 WHI O T • Forged, Integral Trigger Guard 5. A 56 mm N • Forward Assist & Dust Cover • Chromed Firing Pin ® • Armornite Finish on Barrel - Interior and Exterior DMO MODEL SKU REE OR C .5 M&P®15 SPORT™ II 10203 COMPLIANT FOR SALE IN NJ 6 5.56mm NATO/223 REM R O 10 Round O 6.5 M 16” Barrel, 1 in 9”, 6 Groove CREED SPECIFICATIONS 6.5 CREEDMOOR SMITH-WESSON.COM 8 WIN 30 HISPER W 00 3 IN m NAT 308 W 6m O .5 5 R • 6-Position, Adjustable Stock 3 PE 00 WHIS • Magpul® MBUS® Rear Sight O T 5. A • Forged, Integral Trigger Guard 56 mm N • Forward Assist & Dust Cover MODEL SKU • Chromed Firing Pin ® DMO REE OR ® ™ • Armornite Finish on Barrel - Interior and Exterior C .5 M&P 15 SPORT II 11616 6 COMPLIANT FOR SALE IN CO 5.56mm NATO/223 REM 10 Round R O 6 O 16” Threaded Barrel, 1 in 9”, 6 Groove .5 CREEDM ® ™ SPECIFICATIONS See M&P 15 SPORT II Availability on Page 36 27 6.5 CREEDMOOR ® Built to perform for multiple uses and under various conditions, the M&P 15 rifl e forms the intersection between lightweight and rugged. Chambered 8 WIN 30 ® in 5.56mm NATO/.223 or .300 Whisper®, the M&P®15 rifl e is an ideal modern sporting rifl e for competitive sport shooting, hunting and other practical ISPE M&P 15 RIFLES H R ® W applications. Control, comfort and certainty are yours with the M&P 15 rifl e line. 00 3 IN m NAT 308 W 6m O .5 5 R 3 PE 00 WHIS O T 5. A 56 mm N • 5R Rifl ing for Superior Accuracy and Easier Cleaning • S&W®/Magpul® Co-Branded Lower Receiver DMO ® REE OR C • Magpul Original Equipment Slimline .5 NEW 6 • Patented S&W® Flash Suppressor MODEL SKU • Magpul® MOE® SL™ Grip, 6-Position Mil-Spec Stock and ® ® R O M&P 15 MOE SL MID 11512 Mid-Length Handguard 6 O .5 CREEDM 8 WIN 5.56mm NATO/223 REM • Folding MBUS® Rear Sight 30 ® 30 Round PMAG® • 2” M-LOK® Polymer Picatinny-Style Rail Panel Included ISPE ® WH R 00 16” 4150 CMV Barrel, 1 in 8”, 5R Rifl ing • Armornite Finish on Barrel - Interior and Exterior 3 SPECIFICATIONS M&P 15 RIFLES • Chromed Firing Pin BLACK IN m NAT 308 W MID-LENGTH GAS SYSTEM 6m O 6.5 .5 CREEDMOOR 5 R 3 PE 00 WHIS O ® ® 5 T SMITH & WESSON /MAGPUL .5 A 6 mm N CO-BRANDED, FORGED LOWER RECEIVER • 5R Rifl ing for Superior Accuracy and Easier Cleaning • S&W®/Magpul® Co-Branded Lower Receiver DMO ® REE OR • Magpul Original Equipment Slimline C NEW .5 • Patented S&W® Flash Suppressor 6 MODEL SKU • Magpul® MOE® SL™ Grip, 6-Position Mil-Spec Stock and ® ® R M&P 15 MOE SL MID 11513 Mid-Length Handguard O 6 O ® .5 CREEDM 5.56mm NATO/223 REM • Folding MBUS Rear Sight 8 WIN 30 30 Round PMAG® • 2” M-LOK® Polymer Picatinny-Style Rail Panel Included ® HISPER 16” 4150 CMV Barrel, 1 in 8”, 5R Rifl ing • Armornite Finish on Barrel - Interior and Exterior W 00 3 SPECIFICATIONS FLAT DARK EARTH • Chromed Firing Pin IN MID-LENGTH GAS SYSTEM m NAT 308 W 6.5 6m O CREEDMOOR .5 5 R 3 PE 00 WHIS O T 5. A 56 mm N • 5R Rifl ing for Superior Accuracy and Easier Cleaning • S&W®/Magpul® Co-Branded Lower Receiver ® ® ® DMAGPULMO MOE SL HANDGUARD • Magpul Original Equipment Slimline REE OR NEW C ® .5 • Patented S&W Flash Suppressor 6 MODEL SKU • Magpul® MOE® SL™ Grip, 6-Position Mil-Spec Stock and M&P®15 MOE SL® MID 11553 Mid-Length Handguard R O ® 6 O 5.56mm NATO/223 REM • Folding MBUS Rear Sight .5 CREEDM ® ® • 2” M-LOK Polymer Picatinny-Style Rail Panel Included 8 WIN 30 Round PMAG 30 16” 4150 CMV Barrel, 1 in 8”, 5R Rifl ing • Armornite® Finish on Barrel - Interior and Exterior SPECIFICATIONS ISPE STEALTH GREY • Chromed Firing Pin WH R 00 MID-LENGTH GAS SYSTEM 3 6.5 IN CREEDMOOR m NAT 308 W 6m O .5 5 R 3 PE 00 WHIS O T 5. A 56 mm N SMITH-WESSON.COM • 5R Rifl ing for Superior Accuracy and Easier Cleaning • VTAC®/Troy 13” BattleRail® Alpha Rail® Free-Float Handguard ® DMO • Patented S&W Flash Suppressor REE OR MODEL SKU C .5 ® 6 M&P®15 VTAC® II 811025 • Geissele Super-V Trigger • Viking Tactics® Light Mount, Tactical Sling, 5.56mm NATO/223 REM LPSM Low Profi le Sling Mount R ® ® ® O 30 Round PMAG 6 VTACO /TROY 13” BATTLERAIL • VLTOR® iMod 6-Position Stock .5 CREEDM ALPHA RAIL® FREE-FLOAT HANDGUARD 16” 4150 CMV Barrel, 1 in 8”, 5R Rifl ing • Armornite® Finish on Barrel - Interior and Exterior SPECIFICATIONS MID-LENGTH GAS SYSTEM 28 • Chromed Firing Pin See M&P®15 Rifl e Availability on Pages 36-37 6.5 CREEDMOOR 8 WIN ® 30 HISPER W M&P 15 RIFLES 00 3 IN m NAT 308 W 6m O .5 5 R 3 PE 00 WHIS O T 5. A 56 mm N • Removable Carry Handle • Chrome Lined Barrel Bore & Chamber M&P 15 RIFLES ® DMO • Armornite Finish on Barrel - Interior and Exterior REE OR NEW C .5 • 6-Position, Telescopic Stock 6 MODEL SKU • Chromed Firing Pin ® M&P®15 11511 R O 6 O 5.56mm NATO/223 REM .5 CREEDM 8 WIN 30 30 Round PMAG® HISPER 16” Barrel, 1 in 7”, 6 Groove W 00 3 SPECIFICATIONS CARRY HANDLE/REAR SIGHT 30 WIN m NATO ADJUSTABLE UP TO 6008 METERS 6.5 6m .5 CREEDMOOR 5 R 3 PE 00 WHIS O T 5. A 56 mm N • Troy Carbine-Length Quad Rail Handguard • Troy Rear Folding Battle Sight • Chrome Lined Barrel Bore & Chamber DMO REE OR C .5 • 6-Position, Telescopic Stock 6 MODEL SKU • Chromed Firing Pin M&P®15X 811008 R O 6. MO 8 WIN 5.56mm NATO/223 REM 5 CREED 30 ® 30 Round PMAG ISTROYPE CARBINE-LENGTH HANDGUARD 16” Barrel, 1 in 9”, 6 Groove WH R 00 3 SPECIFICATIONS IN m NAT 308 W 6m O 6.5 .5 5 CREEDMOOR R 3 PE 00 WHIS O T 5. A 56 mm N • New, M&P Slim, Aluminum Carbine-Length Handguard with Magpul® M-LOK® ® DMO • 2” M-LOK Aluminum Picatinny-Style Rail Panel Included REE OR NEW C .5 • Picatinny-Style Top Rail 6 MODEL SKU • Forged, Integral Trigger Guard ® ® ® M&P 15X with M-LOK 11535 • Armornite Finish on Barrel - Interior and Exterior R O 6 O 5.56mm NATO/223 REM • 6-Position, Telescopic Stock .5 CREEDM SMITH-WESSON.COM ® ® • Chromed Firing Pin NEW, M&P SLIM, ALUMINUM8 WIN 30 Round PMAG 30 16” Barrel, 1 in 8”, 5R Rifl ing CARBINE-LENGTH HANDGUARD WITH SPECIFICATIONS HISPER ® ® W MAGPUL M-LOK 00 3 6.5 IN CREEDMOOR m NAT 308 W 6m O .5 5 R 3 PE 00 WHIS O T 5. A 56 mm N • Magpul® MOE® 6-Position, Telescopic Stock • Magpul® MBUS® Sights ® ® • Magpul MOE Grip DMO REE OR MODEL SKU ® C .5 • Troy Alpha Rail Free-Float Handguard 6 M&P®15 TS 811024 • Permanent Smith Vortex Flash Suppressor 5.56mm NATO/223 REM • Chrome Lined Barrel Bore & Chamber R ® O ® • Chromed Firing Pin TROY ALPHA6 ORAIL FREE-FLOAT HANDGUARD 30 Round PMAG .5 CREEDM 14.5” 4150 CMV Barrel, 1 in 7”, 5R Rifl ing SPECIFICATIONS 16” BARREL – INCLUDING PINNED AND WELDED FLASH HIDER See M&P®15 Rifl e Availability on Pages 36-37 29 6.5 CREEDMOOR 8 WIN 30 HISPER W 00 3 IN m NAT 308 W 6m O .5 5 R ® 3 PE 00 WHIS O M&P 15 RIFLES T 5. A 56 mm N • Lightweight Contoured Barrel Profi le NEW • 5R Rifl ing for Superior Accuracy and Easier Cleaning ® ® DMO • Magpul MBUS Sights REE OR MODEL SKU C .5 ® 6 M&P®15T with M-LOK® 11600 • 13” M&P Slim Modular Free-Float Handguard with Magpul® M-LOK® Capability 5.56mm NATO/223 REM • Forged, Integral Trigger Guard R ® O 30 Round PMAG ® 6. MO • Armornite Finish on Barrel - Interior and Exterior 5 CREED 16” Barrel, 1 in 8”, 5R Rifl ing • 6-Position, Telescopic Stock SPECIFICATIONS MID-LENGTH GAS SYSTEM ® 8 WIN • Patented S&W Flash Suppressor 30 ISPER WH ® 00 13” M&P3 SLIM MODULAR FREE-FLOAT HANDGUARD6.5 WITH ® ® CREEDMOOR MAGPUL M-LOK CAPABILITYN ® I m NAT 308 W 6m O .5 5 R E 300 ISP M&P 15T RIFLES WH O T 5. A 56 mm N ® NEW • Crimson Trace LiNQ System • Lightweight Contoured Barrel Profi le MODEL SKU DMO • 5R Rifl ing for Superior Accuracy and Easier Cleaning REE OR C ® ® ® ® .5 M&P 15T with M-LOK 11777 • Magpul MBUS Sights 6 ® with Crimson Trace® LiNQ™ System • 13” M&P Slim Modular Free-Float Handguard with Magpul® M-LOK® Capability Crimson Trace’s patented Instinctive R O 5.56mm NATO/223 REM ™ 6 O Activation laser system operation button • Forged, Integral Trigger Guard .5 DM ® CREE 30 Round PMAG ® SPECIFICATIONS is found on the front of the pistol grip.
Load more

Recommended publications
  • Instruction for Vector Optics Tactical Bipod Mounts ATTENTION: Make Sure Firearm Is Unloaded Universal Picatinny Style
    Instruction for Vector Optics Tactical Bipod Mounts ATTENTION: Make sure firearm is unloaded Universal Picatinny Style Fit 21mm weaver and picatinny rail Press down the lockable button to open or folder the bipod Turn and release the leg sleeve, the spring loaded leg will be extended, then fasten the leg sleeve again To retract the leg, loosen the leg sleeve, push back the leg to the end, retighten the leg sleeve again Solid rubber feet avoid slipping With barrel mount adapter Stud Connection Style Stud connection mount for sling attachment Press the button to release the spring loaded leg If need to retract the extendable leg, just press the button again and push the leg back Solid rubber feet avoid slipping With weaver picatinny mount adapter. To use the adapter, remove the bipod tiny rubber sleeve, clamp into the adapter stud hole. Fasten the bottom nut. Swivel Stud Connection Style Swivel stud connection mount for sling swivel attachment Press the button to release the spring loaded leg 15 inch bipod, press first button and pull the extendable legs, press last button to release the spring loaded leg If need to retract the extendable leg, just press the button again and push the leg back Solid rubber feet avoid slipping Weaver picatinny mount adapter. To use the adapter, remove the bipod tiny rubber sleeve, clamp into the adapter stud hole. Fasten the bottom nut. Swing-able design for leveling on uneven ground. Select proper angle and fasten thumb nut to lock the position www.scvector.biz www.scvector.com .
    [Show full text]
  • The AK47: Full Auto Conversion for Dummies by Royi “Uncle Ro” Eltink Author of “Uncle Ro’ Extreme Survival” and “The Paramilitary Commando” Series
    The AK47: Full Auto Conversion for Dummies By Royi “Uncle Ro” Eltink Author of “Uncle Ro’ Extreme Survival” and “The Paramilitary Commando” series. Disclaimer: This is for educational purposes only! The author fully disclaims anything the reader does with this information. In some countries and places this information can be prohibited by law, you act on your own responsibility now. An AK47 and his happy owner Preamble The AK47 has an long and infamous history, as the world’s bestseller on the gun market, it has seen every conflict since its introduction in 1947. It is cheap, easy to manufacture and maintain and anyone who can hold a rifle and pull a trigger can be an expert on this weapon in an half hour. Of course, every respectable nation on this planet has build one or two versions of the Russian rifle, famous are the Chinese, German, Finnish (Valmet), Israeli (Galil), South-African and the Dutch…..and many more I did not mention. Let’s begin with an wishlist Of course, you cant just read this thing and finish reading and ending up with an full auto AK.. You have to get you’re hands on a couple of things first. You need the normal civil, sports, version of the AK47 or an AKM. Further you might want to have: - Proper license for all these things, and the thing you are going to build - Full auto parts set, I will point out how to make an template to fit these in. - Full auto bolt carrier in those models who don’t have one.
    [Show full text]
  • The European Bronze Age Sword……………………………………………….21
    48-JLS-0069 The Virtual Armory Interactive Qualifying Project Proposal Submitted to the Faculty of the WORCESTER POLYTECHNIC INSTITUTE in partial fulfillment of the requirements for graduation by _____________________________ ____________________________ Patrick Feeney Jennifer Baulier _____________________________ Ian Fite February 18th 2013 Professor Jeffrey L. Forgeng. Major Advisor Keywords: Higgins Armory, Arms and Armor, QR Code 1 Abstract This project explored the potential of QR technology to provide interactive experiences at museums. The team developed content for selected objects at the Higgins Armory Museum. QR codes installed next to these artifacts allow visitors to access a variety of minigames and fact pages using their mobile devices. Facts for the object are selected randomly from a pool, making the experience different each time the code is scanned, and the pool adapts based on artifacts visited, personalizing the experience. 2 Contents Contents........................................................................................................................... 3 Figures..............................................................................................................................6 Introduction ……………………………………………......................................................... 9 Double Edged Swords In Europe………………………………………………………...21 The European Bronze Age Sword……………………………………………….21 Ancient edged weapons prior to the Bronze Age………………………..21 Uses of European Bronze Age swords, general trends, and common innovations
    [Show full text]
  • Rings & Bases 249-269
    ALLCHIN S&W REVOLVER MINI STS HIGH STANDARD TARGET PISTOLS RINGS & BASES INDEX SCOPE MOUNT UNIVERSAL SCOPE MOUNT Fitting & Custom Components ...268-269 Rifle ..........................251-268 Mount A Mini Red Dot On Any Factory Part Ensures A RINGS & BASES Handgun ...................... 249-250 Shotgun ........................250-251 Pre-Drilled S&W Revolver Perfect Fit Easy-to-install mount lets you Lightweight alumi- upgrade any pre-drilled S&W revolver num mount with multiple WEIGAND COMBAT with a small red dot sight. Machined cross-slots for Weaver-style rings allows proper scope eye relief. aluminum construction offers durability Weighs only 2 oz., won’t affect balance. TORX screws resist strip- ® recoil pins to prevent “scope flyoff," and and weight savings. Mount body align- ping. Requires no gunsmithing. ab HANDGUN SCOPEMOUNTS 1 accepts Weaver-style rings or mount ment holes accept C-More STS, Burris SPECS: Aluminum, Hard Anodized Finish. 6" (15.2cm) x /2" (12.7mm). Wt TAURUS TRACKER SCOPE MOUNT systems such as used on Tasco 40mm Fastfire, JPoint, Optima 2000, Leupold Delta Point, Sig and most = 2 oz, Black. Fits: Olympic OM, M Grip, .22 Short; Supermatic Citation - Precision-machined, aluminum red dot optics. Super Redhawk .44 other small red dot sights. Positions red dot over the rear sight and SC-M, M Grip, .22; Supermatic Tournament SK-M, M Grip, .22; Supermatic scope mount accepts Weaver-style Mag fits only the .44 Magnum and can as close to the bore as possible for fast target acquisition. ab Trophy STR-M, M Grip, .22; Victor VCT-M, M Grip, .22 rings to let you mount a scope on your be installed without removing the front and rear sights.
    [Show full text]
  • Spuhr 2021 Isms™ Catalog
    2021 SPUHR 2021 ISMS™ CATALOG IDEAL SCOPE MOUNT SYSTEM™ 1 ABOUT THIS CATALOG Thank you for your interest in our products! This catalog contains the full assortment of scope mounts and separate rings that make up the ISMS™ product family. The order of presentation is from the lowest mount with no tilt to the highest with maximum tilt from the smallest ring size/tube diameter to the largest. If you cannot find a specific mount you are looking for, and you have a special requirement to fill, we are able to provide mounting solutions outside of our normal product range in this catalog. Such projects do require a minimum volume of 50 units. To make this catalog as universal as possible it does not contain any prices, but we have included all measurements and the weights of the products when mounted. We hope you will find this catalog to your liking and we welcome any feedback you may have. If you want to see more of our capabilities, please visit our website www.spuhr.com or www.spuhr.biz. Yours sincerely, Håkan Spuhr 2 CONTENT ABOUT THIS CATALOG ........................................................................................... 1 ABOUT ISMS ........................................................................................................... 3 PICATINNY MOUNTS .............................................................................................. 4 30 mm Unimounts .................................................................................................. 4 34 mm Unimounts .................................................................................................
    [Show full text]
  • Ar15 Semi—Automatic Instruction/ Safety Manual Caution
    AR15 SEMI—AUTOMATIC INSTRUCTION/ SAFETY MANUAL CAUTION: USE ONLY CLEAN, DRY, ORIGINAL, HIGH QUALITY COMMERCIALLY MANUFACTURED AMMUNITION IN GOOD CONDITON which is appropriate to the caliber of your firearm. We do not recommend the use of remanufactured or hand loaded ammunition because it may cause severe damage to yourself and/ or your rifle. Page 1 SECTION 1 PRECAUTIONS READ AND UNDERSTAND ALL THE FOLLOWING PRECAUTIONS BEFORE REMOVING THIS FIREARM FROM ITS PACKAGE. ! WARNING: IF THIS FIREARM IS CARELESSLY OR IMPROPERLY HANDLED, UNINTENTIONAL DISCHARGE COULD RESULT AND COULD CAUSE INJURY, DEATH, OR DAMAGE TO PROPERTY. CAUTION: PRIOR TO LOADING AND FIRING, CAREFULLY READ THIS INSTRUCTION MANUAL WHICH GIVES BASIC ADVICE ON THE PROPER HANDLING AND FUNCTIONING OF THIS RADICAL FIREARMS SYSTEM. However, your safety and the safety of others (including your family) depends on your mature compliance with that advice, and your adoption, development and constant employment of safe practices. If unfamiliar with firearms, seek further advice through safe handling courses run by your local gun clubs, NRA approved instructor, or similar qualified organizations. Page 2 NOTICE: Radical Firearms shall not be responsible for injury, death, or damage to property resulting from either intentional or accidental discharge of this firearm, or from its function when used for purposes or subjected to treatment for which it was not designed. Radical Firearms will not honor claims involving this firearm which result from careless or improper handling, unauthorized adjustment or parts replacement, corrosion, neglect, or the use of wrong caliber ammunition, or the use of ammunition other than original high quality commercially manufactured ammunition in good condition, or any combination thereof.
    [Show full text]
  • Manson Precision Receiver Accurizing System
    Manson Precision Receiver Accurizing System Rhomboidal and pavid Slim reinterred her sundries feign or municipalizes estimably. Bewhiskered and dorsiventral Shurlock often disorientates some suspiration jeopardously or gumshoe therapeutically. Toothsome Ned sometimes climb-downs any hypogyny objectivize thriftily. Austenite molecular structure in receiver accurizing your order to impact forging die was attached to It has a receiver accurizing and precision machined hand when needed. National Match Rifle, Serial No. Ups For Remington Centerfire Rifles MAGAZINE CLIP is best carrying cases for extra ammo; they spoke right knowledge the gun. Available in precision manufacturing, deeply serrated face! Winchester receiver accurizing system and precision receiver, butt plate screw only received and the systems, the barrel bore. Sold had designed by the receiver accurizing kit! If they are precision. Even directional change the receiver accurizing system for precise, fulton armory operating rod rail hand and flexibility. The replacement magazine followers should have three neat and evenly spaced spot welds attaching the stop to the follower. End to match category will enlarge due to. The magazines were rotated for even use and the rate of fire was measured during one of the twenty round bursts. It is precision receiver accurizing system was unable to do so you wont need to work was a manson. He fled to the jungle the same day. SPECS: Aluminum, anodized, red. The reamer has a FLOATING pilot that measures approx. Bush and receiver. SPECS: Stainless steel, belt finish. Tactical Forums discussion board www. Low maintenance, Parkerized finish resists corrosion and matches the rest of your rifle. This corn is therefore excellent turnover and fluctuate barely ever used.
    [Show full text]
  • Weaver Mounts Chart
    WEAVER MOUNTS CHART WEAVER Top Mount Ring Height Guide Dovetail Ring Height Guide Ring Size Saddle Height Fits Objective Ring Size Saddle Height Fits Objective 1" Low 0.089 Thru 38mm 1" Low 0.150 Up to 40mm 1" Medium 0.169 Thru 40mm 1" Medium 0.270 Thru 50mm 1" High 0.332 Thru 44mm 1" High 0.400 Thru 56mm 1" X-High 0.560 Thru 50mm 1" X-High 0.520 Over 56mm 1" See-Thru 0.750 Thru 50mm 30mm Medium 0.320 Thru 56mm 30mm Low 0.288 Thru 33mm 30mm High 0.490 Over 56mm 30mm High 0.500 Thru 44mm 1" Medium .22 Rings 0.262 Thru 40mm 1" Tip-Off 0.250 Thru 36mm 1" High .22 Rings 0.392 Thru 44mm 1" Tip-Off See-Thru 0.750 Thru 50mm 1" X-High .22 Rings 0.512 Thru 50mm Note: Chart applies to Grand Slam, Sure Grip, Detachable, Quad Lock and Lever Lok 1" Medium Mod 77/22 & No 1 0.453 Thru 50mm Rings. 1" Medium Mod 77 Stepped Thru 50mm 1' High Mod 77 Stepped Thru 56mm Note: Chart applies to Dovetail Rings. Tactical Style Ring Height Guide Ring Size Saddle Height Fits Objective Ring Size Saddle Height Fits Objective 1" Med .280" Thru 40mm 30MM High .490" Thru 44mm 1" High .400" Thru 44mm 30MM X-High .610" Thru 56mm 1" X-High .520" Thru 50mm 34MM Low 0.327 Thru 24mm 1" XX-High .640" Thru 56mm 34MM High .0.577" Thru 44mm 30MM Low .250" Thru 38mm 34MM XX-High 0.827" Thru 56mm 30MM Med .370" Thru 40mm ® SIDE GRAND SLAM® GRAND SLAM® WEAVER® ALUMINUM TOP MOUNT BASES MULTI-SLOT BASES STEEL LOCK COMPLETE WEAVER MOUNT SEE-THRU MOUNT MOUNT STEEL TOP MOUNT BASES DOVETAIL BASES APPLICATIONS CHART RINGS SYSTEMS NOTES STANDARD 2-PC BASES EXTENSION BASES 1-PC 1-PC 1-PC USE
    [Show full text]
  • Summary Description Semi-Automatic Sporting Rifle SIG-AMT Cal
    - Summary Description Semi-Automatic Sporting Rifle SIG-AMT cal. 7.62x51 mm (.308 Win.) Swiss Industrial Company CH- 8212 Neuhausen Rhine Falls/Switzerland Phone 053/81555 Telex 76156 sig ch - 3 - Contents l. Weapon theory Page l.l. Designation and purpose 5 1.2. Main components and accessories 6- 7 1.3. Dismantling and assembly 9 1.4. Cleaning and maintenance ll 1.5. Functional checks 12 2. Manipulation 2.1. Loading, reloading, unloading 13-14 2.2. Positions of firing, using normal ammunition 14 2.3. Sight adjustments 16 3. Technical data 17-18 - 4 - - 5 - l. Weapon theory 1.1. Designation and purpose The semi-automatic sporting rifle SIG-AMT is a delayed blow-back weapon with stationary barrel and semi-rigid breech. The cartridges are fed from magazines of 5, 10 or 20 rounds. A considerably reduced recoil and the bipod which lends the rifle a firm support, improves accuracy of aim in all types of fire. Next to the normal trigger, in latched neutral position, is a winter trigger. This can be un­ latched and shifted into engagement to allow firing in mittens. In the head of the breech casing is a loading indicator, affording a visual check as to whe­ ther the weapon is loaded or unloaded. - 6 - - 7 - 1.2. Main components Accessories The principal parts of the weapon are: - Magazines for 5, 10 or 20 rounds - Barrel, bolted firmly to the breech casing. - Sling Pull-through with string and wire brush Breech casing with 2 lock heads, carrying - Loading indicator holder handle, loading indicator, bolt, rear sight and cartridge ejector opening.
    [Show full text]
  • CASV Handguard for the FAL Rifle Note: the CASV-FAL System Will Not Fit on Rifles Using the G1 Or Similarly Profiled Barrels
    CASV Handguard for the FAL Rifle Note: The CASV-FAL System will not fit on rifles using the G1 or similarly profiled barrels Improper installation can result in damage. Do not attempt installation if you are not familiar with the firearm, tools and techniques mentioned. You are responsible for any damage or READ injury resulting from the improper use THIS! or installation of this product. Ensure the rifle is CLEAR and SAFE! Before installation, read Instructions, Warnings and Notes. NOTE: Make sure that the firearm is unloaded and safe before proceeding – if you are unsure of how, or uncomfortable with the proper clearing and safe handling of the firearm, do not proceed! We recommend that the installation of this part be done only by a qualified gunsmith or agency armorer. 1. Before proceeding, please inspect the handguard assembly and hardware to ensure that you are familiar with all of the parts. 1 - Upper handguard Assembly 2 - Lower handguard Assembly 3 - Forward mounting screw retaining clip 4 - Forward mounting screw 5 - Rear mounting cross screw 6 - Rear mounting clamping nut 7 - Upper Handguard retaining screws (6 for FAS, 8 for FAL) 8 - Picatinny Accessory Rails & Screws 2. Install the lower handguard section by sliding it over the front sight gas block, and rearward over the handguard retainer. After the lower section is in place, install the forward mounting screw from the right side of the handguard, ensuring that it goes through the front sight gas block. Note: only snug the screw enough to hold the lower handguard section in place. 3.
    [Show full text]
  • (12) United States Patent (10) Patent N0.: US 6,594,938 B2 Horton (45) Date of Patent: Jul
    US006594938B2 (12) United States Patent (10) Patent N0.: US 6,594,938 B2 Horton (45) Date of Patent: Jul. 22, 2003 (54) FRONT INTERFACING DETACHABLE 5,941,006 A * 8/1999 Horton ...................... .. 42/124 SCOPE MOUNT 6,250,008 B1 * 6/2001 Silver ...................... .. 42/70.01 6,269,577 B1 * 8/2001 Hardy . .. 42/127 (76) Inventor: JohnMonnceno’ ' Wiley FL(US)Horton, 32344430 Satsuma Ave., 6,427,374 B1 Z:* 8/2002 giwonskiVaianiaumann ......................... e a ~. ~ ~ ~ ~ ~~ .. 42/85 ( * ) Notice: Subject to any disclaimer, the term of this FOREIGN PATENT DOCUMENTS patent is extended or adjusted under 35 U_S_C_ 154(k)) by 0 days' W0 WO 99/63295 * 12/1999 * . (21) Appl. N0.: 09/963,852 cued by exammer (22) Filed: Sep_ 26’ 2001 Primary Examiner—Michael~ J. Carone Assistant Examiner—John Richardson (65) Prior Publication Data (74) Attorney, Agent, or Firm—J. Wiley Horton US 2003/0056417 A1 Mar. 27, 2003 (57) ABSTRACT (52) US. Cl. ................................ ... 42/127;. .. 42/72; 42/90; AOperated using only one alatching mechanism_ The mount 42/124; 42/125; 42/126; 42/141; 42/111; uses a front base attached to the ring of a ri?e receiver and 89/3704; 89/3709; 89/3713; 89/3716 a rear base attached to the bridge of a ri?e receiver. The of Search ............................ .. 90, upper surfaces of both the front and rear bases Open into a ‘12/125, 126, 127, 111, 141; 89/3704, 3709, pair of slots. A separate scope mount is attached to a scope 37-13, 37-16 sight by conventional means. TWo sets of lugs descend from the loWer surfaces of this scope mount.
    [Show full text]
  • 2020 Product Catalog Tm
    TM 2020 PRODUCT CATALOG TM SENTRY Products Group. We Live to Protect! 2 We are proud to introduce our 2020 product assortment featuring new products, new categories and further expansion of our tactical nylon line. While the nylon line had seen steady growth, a visit from a key customer in the summer of 2019 changed the pace of our development creating a combination of lightweight and configurable components with the flexibility to meet changing mission demands. For the latest project check out the Gunnar Series Plate carrier featured on page 10. Along with our nylon line developments the hybrid Hexmag magazine which combined the best attributes of metal and polymer technologies was launched to support the Glock 17. Additional platforms are in the works as we continue to expand the Hexmag line up. Whether you protect your home, family, or country, our commitment to you is simple – we will continue to produce the best, most innovative product on the market to enhance your experience. We are so confident that we back each product with a hassle- free Lifetime Warranty, protecting your investment. From the team at SENTRY, thank you for your support and confidence. TABLE OF CONTENTS MAGAZINES . .4-7 ON GUN ACCESSORIES . 8-9 PLATE CARRIER AND ACCESSORIES . 10-13 BELTS AND POUCHES . 14-21 SLINGS. .22-23 OPTIC COVERS. .24-29 FIREARM COVERS . .30-33 CLEANING AND LUBRICATION. .34-39 BAGS. .40-41 OEM PROGRAMS. .42-43 3 When every round counts™ 4 ™ POLYHEX2 The proprietary advanced composite that all Hexmag magazines are made from delivers superior strength and reliable performance across the modern sporting rifle and pistol spectrum.
    [Show full text]