DOCSLIB.ORG

Lot 6 Arden Winch

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Lot 6 Arden Winch Lot 6 - Corporate Wear & Uniforms – Arden Winch & Co Ltd Catalogue no./ Description Unit Price (exc vat) Product Code Comments/ Warranty/ Guarantee Polo Shirts Womens Sustainably Sourced S/S Polo Shirt, 100% cotton, pique knit cotton polo shirt, 2 button placket, various colours & sizes. Each £3.67 UC112 180 gram 100% cotton XS-5XL Womens S/S Polo Shirt, 180gsm, 65% polyester, 35% cotton, V-neckline, various colours & sizes. Each £3.00 UC105 190gsm size XS-4XL Womens Poloshirt, 220gsm, 60% cotton, 40% polyester, slimline fit, five button front placket, various colours & sizes. Each £3.67 UC106 220gsm size XS-4XL Premier Womens S/S Poloshirt, 230gsm, 65% polyester, 35% cotton, 3 button placket, two- ply pre-twisted yarn, various colours & sizes. Each £4.94 UC102 250gsm size XS-4XL Mens Sustainably Sourced S/S Polo Shirt, 100% cotton, pique knit cotton polo shirt, 3 button placket, various colours & sizes. Each £3.67 UC112 180 gram 100% cotton XS-5XL Mens S/S Polo Shirt, 220gsm, 65% Polyester, 35% Cotton, 3 button placket, various colours & sizes. Each £3.67 UC101 220gsm size XS-4XL Mens S/S Polo Shirt, 180gsm, 65% polyester, 35% cotton, 2 button placket, various colours & sizes. Each £3.00 UC105 190gsm size XS-4XL Mens S/S Poloshirt, 190gsm, 50% polyester, 50%, various colours & sizes. Each £3.00 UC105 190gsm size XS-4XL Premier Mens S/S Polo Stud Shirt, 200gsm, 65% polyester, 35% cotton, 3 rustfree ring studded placket, various colours & sizes. Each £3.47 UC109 200gsm size XS-4XL Premier Mens S/S Poloshirt, 230gsm, 65% polyester, 35% cotton, two-ply pre- twisted yarn, 3 button placket, various colours & sizes. Each £4.94 UC102 250gsm size XS-4XL Unisex S/S Poloshirt, 195gsm, 100% polyester, ribbed collar, three stud front placket, various colours & sizes. Each £5.55 UC121 Size S-3XL Unisex S/S Poloshirt, 180gsm, 65% polyester, 35% cotton, ribbed collar and cuffs, 3 button front placket, various colours & sizes. Each £3.00 UC105 190gsm size XS-4XL Unisex S/S Poloshirt, 195gsm, 65% cotton, 35% polyester, ribbed collar and cuffs, 3 button front placket, various colours & sizes. Each £3.47 UC109 200gsm size XS-4XL Unisex S/S Poloshirt, 190gsm, 60% cotton, 40% polyester, 2 button front placket, various colours & sizes. Each £3.00 UC105 190gsm size XS-4XL Unisex L/S Poloshirt, 220gsm, 100% cotton, ribbed collar & cuffs, two button front placket, various colours & sizes. Each £6.47 UC113 250gsm 50% cotton 50% Poly. Premier Unisex S/S Poloshirt, 245gsm, 100% combed cotton, 3 button front placket, various colours Each £5.00 UC104 250gsm size XS-3XL Sweatshirts Crew Neck Sweatshirt, 260gsm, 65% polyester, 35% cotton, ribbed cuffs, neck & hem, various colours & sizes. Each £5.34 UC203 300gsm size XS-4XL Crew Neck Sweatshirt, 300gsm, 65% polyester, 35% cotton, ribbed cuffs, neck & hem, various colours & sizes. Each £5.34 UC203 300gsm size XS-4XL Crew Neck Sweatshirt, 300gsm 50% polyester, 50% cotton, various colours & sizes. Each £5.34 UC203 300gsm size XS-4XL Unisex Hooded Sweatshirt, 285gsm, 65% cotton, 35% polyester, fleece lining, drawcord hood, front pocket, ribbed cuff & hem, various colours & sizes. Each £7.10 UC502 300gsm size XS-4XL Unisex Sweatshirt, 285gsm, 65% cotton, 35% polyester, ribbed cuffs, neck &hem, various colours & sizes. Each £5.34 UC203 300gsm size XS-4XL Unisex Crew Neck Sweatshirt, 270gsm, 70% cotton, 30% polyester, ribbed cuffs, neck & hem, various colours & sizes. Each £5.34 UC203 300gsm size XS-4XL Shirts Mandarin Puff Sleeve Blouse , 65% polyester, 35% cotoon, semi fitted, capped puff sleeve with button detail, gathers into front yoke, princess panel shaping, side slits, various colours & VXFB2210 Simon sizes. Each £22.79 J various colours S/S Classic Collar Blouse, 100gsm, 65% polyester, 35% cotton, breast pocket, double back yoke, various colours & sizes. Each £6.95 5350-15 Edinburgh Size 6-30 S/S Flat Collar Blouse, 100gsm, 65% polyester, 35% cotton, side vents, various colours & sizes. Each £10.27 JC762 Heidi Size 8-28 6 colours S/S Open Neck Collar Blouse, 100gsm, 60% cotton, 40% polyester, end on end weave, semi fitted cut, side vents, various colours & sizes. Each £6.64 JC996 Hannah Size 8-30 12 colours 3/4 Sleeve Blouse, 100gsm, 60% cotton, 40% polyester, semi fitted cut, side vents, JC3400 3/4 various colours & sizes. Each £6.96 Hannah Size 8-30 3 colours L/S Classic Collar Blouse, 100gsm, 65% polyester, 35% cotton, breast pocket, double back yoke, various colours & sizes. Each £6.95 5360-15 Edinburgh Size 6-30 9 colours L/S Open Collar Blouse, 100gsm, 60% cotton, 40% polyester, end on end weave, semi fitted cut, side vents, two way cuff, various colours & sizes. Each £6.96 JC997 Hannah Size 8-30 5 colours S/S Convertible Collar Blouse, 115gsm, 67% polyester, 33% cotton, various colours & sizes. Each £10.27 JC762 Heidi Size 8-28 6 colours L/S Convertible Collar Blouse, 115gsm, 67% polyester, 33% cotton, various colours & sizes. Each £11.07 JC862 Heidi Size 8-28 6 colours Stud S/S Shirt, top fused collar, cuffs & pocket flaps, various colours & sizes. Each £9.75 JC960 Co-op Classic Collar S/S Shirt, 100gsm, 65% polyester, 35% cotton, two breast pockets with flaps & buttons, double back yoke, 5300-15 various colours & sizes. Each £7.14 Manchester Size 18.5-23 £8.20 Classic Collar S/S Shirt, 100gsm, 65% polyester, 35% cotton, two breast pockets, double back yoke, various colours & 5300-15 sizes. Each £7.14 Manchester Size 18.5-23 £8.20 S/S Shirt, 140gsm, 15% polyester, 85% cotton, wrinkle free, various colours & sizes. Each £12.60 J947M Russell Size S-4XL 4 colours S/S Button Collar Shirt, 100gsm, 65% polyester, 35% cotton, breast pocket, various colours & sizes. Each £6.94 5100-15 Oxford Size 18.5-23 £7.14 S/S Pilot Shirt, 120gsm, 65% polyester, 35% cotton, classic collar, 2 breast pockets with flaps & buttons, left with pen division, double back yoke, epaulette bars, various colours & sizes. Each £9.06 J2566 Mega Pilot 125GSM size 14-22 collar L/S Cutaway Collar Shirt, 100gsm, 65% polyester, 35% cotton, double back yoke, various colours & sizes. Each £13.02 KK118 Size 15-18.5" collar 3 colours L/S Button Collar Shirt, 100gsm, 65% polyester, 35% cotton, breast pocket, various colours & sizes. Each £7.77 5110-15 Oxford Size £7.94 L/S Classic Collar Shirt, 100gsm, 65% polyester, 35% cotton, breast pocket, double back yoke, various colours & 5310-15 sizes. Each £7.80 Manchester Size 18.5-23 £8.87 Unisex S/S Shirt, 100gsm, 60% cotton, 40% polyester, end on end weave, breast pocket with pen division, various colours & 5300-15 sizes. Each £7.14 Manchester Size 18.5-23 £8.20 Unisex S/S Shirt, 100gsm, 55% cotton, 45% polyester, breast pocket with pen 5300-15 division, various colours & sizes. Each £7.14 Manchester Size 18.5-23 £8.20 L/S Maternity Blouse, 60% cotton, 35% polyester, 5% lycra/elastane, open collar, deep cuff, gathers at lower bust and over tummy, self fabric tie detail, various VXFB2990 Simon colours & sizes. Each £29.99 J T-Shirts Sustainably Sourced Womens T-Shirt, single jersey cotton t-shirt, ribbed neck line, v-neck, 100% cotton, various colours & sizes. Each £1.98 SS057 FOTL Size 8-16 6 Colours Womens T-Shirt, 150gsm, 100% cotton single jersey fabric, flattening V- neckline, various colours & sizes. Each £4.07 H7132 Hanes Size 8-20 7 colours Womens Trim Tee, 180gsm single jersey, 100% combed cotton, slimline fit, narrow rib on neck & cuff, various colours & sizes. Each £2.88 J101F Jerzess Size 10-16 13 colours Sustainably Sourced Mens T-Shirt, 100% cotton, single jersey cotton t-shirt, ribbed neck line, crew neck, various colours & sizes. Each £1.91 SS030 FOTL Size S-3XL 27 colours Mens T-Shirt, 150gsm, 100% cotton single jersey fabric, crew neck, various colours & sizes. Each £1.91 SS030 FOTL Size S-3XL 27 colours Mens Trim Tee, 180gsm single jersey, 100% combed cotton, slimline fit, narrow rib on neck & cuff, various colours & sizes. Each £2.34 SS120 FOTL Size S-3XL 8 colours Unisex T-Shirt, 195gsm, 65% polyester, 35% cotton, crew neck, single jersey knit, reinforced neck seam, tapered shoulders, various colours & sizes. Each £3.70 1005-15 Goshawk Size XS-5XL 7 colours Unisex T-Shirt, 190gsm, 100% cotton, short sleeved, crew neck, various colours & sizes. Each £1.81 SS008 FOTL 195 gsm Size S-3XL 8 colours Unisex T-Shirt, 200gsm, 92% cotton, 8% lycra, v-neck, various colours & sizes. Each £1.81 SS008 FOTL 195 gsm Size S-3XL 8 colours 3/4 Sleeve Maternity Wrap Top, 95% polyester, 5% elastane, v-neck, slashed cuff, rouched detail at lower breast and over tummy, fabric tie, various colours & VXFB2990 Simon sizes. Each £29.99 J Jackets/ Fleeces/Cardigans/Jumpers Womens 3-in-1 Jacket, waterproof fabric outer jacket, Detachable 250gsm fleece inner, concealed hood, various colours & Size S-XXL Navy & Black with contrast sizes. Each £22.20 S571 Elgin Ladies fleece Womens Jacket, 210gsm, 65% polyester, 35% cotton, stud front, two breast & lower pockets, double action back, various colours & sizes. Each £14.95 C859 Portwest Size S-3XL 6 colours Womens 3-in-1 Jacket, concealed hood with adjuster, adjustable shockcord hem, Inner can be worn on its own, various Regatta Lady colours & sizes. Each £38.40 Benson Size S-XXL Womens Two Button Jacket, 100% polyester, collar & rever, two button fastening, two jetted pockets with flaps, Navy or Black size22-28 + 15%, size 28 fully lined, various colours & sizes. Each £34.67 Danielle Skopes +20% 3 button fastening Womens Collarless Jacket, 100% polyester, three button fastening, two jetted pockets with flaps, fully lined, various colours & sizes.
Load more

Recommended publications
  • Convertible Collar Construction
    Convertible Collar Construction Directory Click any image to go to that section Yoke/Facing Options: Intro and Gallery By far the most common set-up for a The purpose of this introductory section is to convertible-collar shirt is that it has front facings feature and compare the range of other options and a yoke, and that these two details don’t touch, also, if less commonly, in use beyond this classic as in the example at right. one, before I proceed to work step-by-step through a handful of useful variants . Many other possible That is, the facings don’t extend far enough combinations, and of course, variations on the towards the shoulders at the neckline that they’ll ones here, are conceiveable and may suit your meet with or join to the fronts of the yoke layers. As project better, so feel free to experiment. a result, the yoke construction steps aren’t integrated into the collar steps and are completed, in front at least, before the collar is begun, so the options for using the yoke as a back facing are eliminated. The steps for this classic arrangement are described below in Variation #5, in the Front Facing Only category. Collar Insertion Options Step-By-Step No Yoke or Facings Required Front facings Only Front and Back Facings, or Yoke Used as Facing Variation 1: Collar Applied as Band Variation 3: Collar’s Back Neckline Edge-Stitched Variation 6: Back Facings 1 3 and Facings Secured at Shoulder Seams 6 Options: Options: 1. Edge-stitched neckline 2.
    [Show full text]
  • EDES PRICE IDENTIFIERS Gradesseven and Eight Is Exploring
    DOCUMENT RESUME' ED 1.17 554 95 % CE 006 263 -AUTHOR Morn, Fern M., Ed. TITLE Home Economics Curriculum for Grades 7-8-9. INSTITUTION Appleton Public Schools, Wis. SPONS AGENCY Office of Education (DHx,T), Washington, D.C. REPORT NO VT-102.-441 BUREAU NO 5-4192/H102 PUB DATE 75 NOTE '780p. ,AVAILABLE FROM Appleton Public Schools' VocatiOnal Edlication Office, 120 E. Harris'Street, Appleton, Wisconsin 54811 ($6.n0) EDES PRICE MF-St.50 HC:-$42.19 Plus Postage DESCRIPTORS Articulation (Program) ;Child. Developtentt Clothing InStruction; *Curriculum Guides; Family Life Education; Foods Instruction; *Home Econeticp Education; Housing; *Instructional Materials;.*Junio High Schools; Learning Activities; Nutrition Instruction; Personal Growth; Testt IDENTIFIERS Wisconsin (Appleton) ABSTRACT The curriculum guide is the result of a project to develop, field test, analyze, and revise,tbe junior high level home economics course offerings Dor Appleton public schools. The theme.for gradesseven and eight is exploring your world and inclIdes five topics:(1) family, stressing personalitylpvelopment and communicating with and understanding other; (2) foods,, presenting nutrition instruction in the four basic food groups, meal planning, use,l)f recipes, manners, and table setting;(3) world of children, discussing the responsibilities of the*care of children; (4) ,clothing, emphasizing personal grooming and clothing care with special attention given to basic sewing skills; and (5) housing, encouraging the' student's sense of responsibility for their owp 'rooms. These five topics are repeated fpr grade nine under the heading of "Focus on Teen-LifeEach topic follows the format course introduction, conceptual structure,including pergprmce objectives; unit, consisting of content, learning experiences, and eiraluative exercises; appendix; and bibliography.
    [Show full text]
  • Zipper Placket for Sweater EN
    ZIPPER PLACKET FOR SWEATER OTTOBRE design® 7/2018, design 3 Stitch the collar to the neckline before constructing the zipper 3. Open zipper. Pin left zipper half to wrong side of left placket placket. The length of the finished placket from the top edge of edge, sandwiching binding in between so that zipper tape the collar to the bottom of the placket is 22 cm. Each placket covers edge of binding. Stitch zipper half in place from its binding includes 10 mm seam allowances at both ends. wrong side close to zipper teeth, using zipper foot. Preparation: Stitch zipper extensions to bottom end of 4. Fold top end of placket binding in three: First wrap binding zipper right sides together, sandwiching zipper in between. over zipper teeth to right side of zipper, then turn seam Fold extension pieces wrong sides together and stitch their allowance to wrong side of binding (see illustration 2). Stitch outer edges together, enclosing bottom end of zipper. Turn and across top end of binding. Trim seam allowances and turn top pin top ends of zipper tapes to right side of zipper and end of binding right side out. machine-baste them in position along their outer edges. 5. Turn seam allowance at long edge of binding to wrong side, 1. Stitch guide stitching along side and bottom edges of zipper pin turned-under edge to right side of placket and stitch close placket with straight stitch, observing pattern markings. Slash to edge (on wrong side, this stitching runs along outer edge of placket opening. Note that a triangular seam allowance is zipper tape).
    [Show full text]
  • Placket Construction Options
    Placket Construction Options 1 Type1: Two Separate Bound Edges on a rectangular stitching box The key to this structure is that the bindings are initially stitched only to the seam allowances on each side, and NOT stitched across the end, of the clipped box, which means that they, and the clipped triangle at the bottom, remain loose and can be arranged before the nal nishing to go on either side of the fabric, as well as either over or under the other, after joining them at the sides. The widths and lengths of the bindings and the space between the sides of the clipped box determine all the other options available in this most exible of all the placket types I know of. Variation 1: Both bindings t inside the stitching box If you cut the bindings so the nished, folded widths of both are equal to or smaller than the space between the initial stitching lines, as shown above, you can arrange both ends at the clipped corners to all go on one side of the fabric (right or wrong side), along with the clipped triangle on the garment. You’ll get the best results if the underlapping binding is slightly smaller than the overlapping one. This can be man- aged by taking slightly deeper seam allowances when you join this piece, so they can initially be cut from the same strip. Or, you can place one end on each side with the Both ends on RS One end on RS, Both ends on WS triangle sandwiched in between.
    [Show full text]
  • Lapped Zipper Lapped Zippers Are Often Found on Skirts at the Waistband
    Sewing Technique: Lapped Zipper Lapped zippers are often found on skirts at the waistband. A lapped zipper is constructed so that the zipper is not visible. The zipper will remain closed throughout the process of inserting the zipper. All sewing is done on the inside of the garment except for topstitching. Remember to always keep the needle positioned between the zipper foot and the zipper teeth when sewing. NOTE: Throughout this tutorial, the term “placket” will be used. A placket is the fabric that surrounds and reinforces fasteners in a garment. In this instance, the fastener referred to in this tutorial is a zipper. STEP 1: On the wrong side of the fabric, measure and mark the placket opening BASTING where the zipper STITCH will be placed. Do this by measuring from the top of the garment down along the seam to the zipper bottom stop. Take into consideration the REGULAR composition of garment and if there will be a waistband or MACHINE STITCH any other special feature at the top of the zipper. Mark the placement of the bottom stop with a marking pencil. STEP 2: While sewing the seam, machine stitch the seam closed until the marked point of the bottom of the zipper, backstitch, then switch to a basting stitch for the distance of the placket seam. Press seam allowance open. $-05)*/( CONSTRUCTION 6UBI4UBUFJTBOBóSNBUJWFBDUJPOFRVBMPQQPSUVOJUZJOTUJUVUJPO STEP 3: Replace sewing machine foot with a zipper foot. Place zipper face down with the teeth centered on the pressed open seam on the inside of the garment, matching top and bottom stops with marks.
    [Show full text]
  • Lapped Zippers
    Lapped Zippers 12.250 Page 1 Suitable for the left side of garments or at the center back, a lapped zipper application has a fabric "flap" to cover the zipper tape. When placed on the side, the lap is from front to back; on a center back application, the lap is placed on the left side of the garment. Up Top Seams Right A lapped zipper application can be open at To begin installing a lapped zipper, the top for skirts or pants, or it may be determine the seam opening based on the closed, as in the underarm side seam of a zipper teeth length and the necessary dress. clearance needed at the upper edge for seaming (see above). When planning the zipper application, consider the zipper upper finish. If there's a Stitch the garment seam up to the facing at the upper edge, the zipper pull determined length and anchor the stitching needs to end about 1/2" below the by backtacking. Change the stitch length to seamline. If it's to be crossed by a basting (6 stitches per inch) and stitch the waistband seam, the zipper pull should be seam where the zipper will go. just below the seamline. Press the seam open. If it's a curved seam, Foot News (1) such as at a hipline, press over a tailor's ham to avoid flattening. A zipper foot allows the needle to be on the side of the actual foot section so you can If the seam requires finishing to prevent stitch closer to the zipper teeth.
    [Show full text]
  • Front Placket for a Shirt Without a Collar
    FRONT PLACKET FOR A SHIRT WITHOUT A COLLAR OTTOBREOTTOBRE design®design® 6/20206/2020 Before constructing the placket, the placket opening on the garment has been slashed for 4 cm starting from the neckline and the neckline has been finished with a bias-cut facing. This placket tutorial has been designed for a garment sewn from lightweight cotton or linen fabric (e.g. double gauze fabric, poplin or linen chambray). Transfer pattern markings for placket on front panel and sew guide stitching around marked placket opening along dashed line. Cut button bands and stitch placket with even 10 mm seam allowances. The terms "inner"/"outer" and "left"/"right" refer to the garment when worn. 2 cm When making a placket on design 3 or 1 29 in issue 6/2020, use the button band pattern that is printed on page 4 of this tutorial instead of the pattern on the magazine pattern sheet. Print the pattern out on A4-size or Letter-size paper. Make sure that the print scaling is set to 100%. 1. Slash placket opening along center-front 1 cm line to within 10 mm from bottom of placket. 2 cm Clip diagonally into corners of guide stitching RS to form a triangle at bottom of placket. Left Right (outer) (inner) 2 cm 2 cm 2 2. Fuse interfacing to wrong side of outer WS WS halves of button bands. Fold button bands in half lengthwise and press creases. © OTTOBRE design® | STUDIO TUUMAT OY reproducing them by any means or in any form is exclusively The designs, instructions and patterns are only intended for reserved for the copyright holder.
    [Show full text]
  • Child's Sweatshirt Makeover
    Child’s Sweatshirt Makeover By Lorine Mason Materials Lay a small plate or other circular object on the front • Child's sweatshirt side of the shirt, so that the outer edge touches the • 1/8 yard cotton fabric for front placket/ruffle bottom and the center front edge of the sweatshirt. • Elastic: 6 inches 3/4-inch-wide and 14 inches Draw a line around the plate between the bottom 1/4-inch-wide of the sweatshirt and center front edge to round the • Two 1/2-inch buttons corner (see Diagram C). Repeat on opposite side. • Three snap sets Cut along the drawn lines through the front layer of • Basic sewing tools and supplies the sweatshirt only (see Diagram D). • Optional embellishments: fabric paint, paintbrush, two complementary fabric scraps, five decorative Cut a 3 x 45-inch strip of cotton fabric. Fold strip buttons in half lengthwise, right sides together, and stitch • Construction Diagrams across each of the short ends using a 1/4-inch seam. Turn right side out and press. Sew two rows of Instructions gathering stiches running parallel to each other at Lay a ruler across the body of the sweatshirt, 1/8-inch and 1/4-inch intervals. This strip will become measuring and marking 8 inches down from the the front placket and hemline ruffle (see Diagram E). underarm seams of sweatshirt along each side. Fold the fabric strip in half widthwise and mark Connect the marks with ruler and cut through center with a pin. Pin the center point of the fabric both the front and back layers of the sweatshirt to strip to the center back of the sweatshirt along the remove the excess length.
    [Show full text]
  • Teamfood HACCP Clothing for the Food Industry
    teamFOOD HACCP clothing for the food industry foodNorm foodRisk classes The protective function of workwear must correspond to the food hygiene risk and the type of work. When choosing medium and dark colours these should be selected so that any hygiene-relevant soiling occurring during work can be easily visibly recognised. Risk class 1 Low hygiene risk = Dealing with non-perishable Provides guidance and aims to make foodstuffs or ingredients it easier to adhere to regulatory • The protective function of the workwear with regard to the conditions of hygiene with regard to foodstuff may be low, if the foodstuff workwear when dealing with is sufficiently protected by packaging and/or an additional foodstuffs. further processing step will be taken by the manufacturer or Applies to all areas in which the consumer. foodstuffs are manufactured, handled or will be placed on the market. Risk class 2 Provides instructions for the manufacturing, selection, usage and High hygiene risk reprocessing of workwear in food processing facilities taking the = Dealing with unpackaged, perishable special requirements of the foodstuffs or ingredients respective workplace into • High protective function of the workwear is primarily consideration. required, where the foodstuffs will not be processed Objective: Avoiding adversely further and micro organisms in or on the foodstuff may impacting foodstuffs to protect the multiply. health of consumers. Risk class 3 Highest hygiene risk = Dealing with unpackaged, ready-to-eat, highly perishable foodstuffs. • The
    [Show full text]
  • 4-H 224 Clothing : Level 2 Rose Marie Tondl
    University of Nebraska - Lincoln DigitalCommons@University of Nebraska - Lincoln Historical Materials from University of Nebraska- Extension Lincoln Extension 186 4-H 224 Clothing : Level 2 Rose Marie Tondl Follow this and additional works at: http://digitalcommons.unl.edu/extensionhist Tondl, Rose Marie, "4-H 224 Clothing : Level 2" (186). Historical Materials from University of Nebraska-Lincoln Extension. 4876. http://digitalcommons.unl.edu/extensionhist/4876 This Article is brought to you for free and open access by the Extension at DigitalCommons@University of Nebraska - Lincoln. It has been accepted for inclusion in Historical Materials from University of Nebraska-Lincoln Extension by an authorized administrator of DigitalCommons@University of Nebraska - Lincoln. (1 f'C:, RD2178 32478 Nebraska Cooperative Extension 4-H 224 eyr I 5 .533 f/tJ ~/II /f;L n_o,-- :2!). y LEVEL 2 Issued in furtherance of Cooperative Extension work, Acts of May 8 and June 30, 1914, in cooperation with the U.S. Department of Agriculture. Leo E. Lucas, Director of Cooperative Extension, University of Nebraska, Institute of Agriculture and Natural Resources . Cooperative Extension provides information and educational programs to all people without regard to race , color, national origin , sex or handicap. Clothing Level 2 Project Planning and Evaluation Sheet Name ________________ 4-H Age ____ Year ____ Years in 4-H ____Name of Club----------------- Signature of leader or parent ___________________ I plan to do From this activity, Comments: these activities I learned: 1 2 3 4 5 6 Presentations or community service activities _______________ 2 THING~ LE EL 2 By Rose Marie Tomil, Extension Clothing Specialist --------------------------------·--------------- WHAT YOU'll DO IN THIS PROJECT So far you have worked with the sewing machine, fabric, and patterns.
    [Show full text]
  • Buttons & Buttonholes
    CT-MMB.189 BUTTONS & BUTTONHOLES BUTTONS Selection Button selection depends on the type and style Buttons can be fascinating, functional, and of the garment. Buttons should be selected fashionable. They are fascinating because of their BEFORE making buttonholes or button loops. many sizes, shapes, colors, and designs. They are Consider the following when making your functional because they are one of the major selection: methods of opening and closing garments. Buttons are fashionable because they also decorate and $ The pattern will have a suggested size which enhance apparel & other items. was determined as the pattern was being made. If the button size is changed, so must the size of the button and buttonhole placket. $ Weight of fabric B Heavy fabric needs heavier and larger buttons; lighter fabric needs lighter and smaller buttons. $ Fabric design B Buttons can blend with the History fabric OR they can call attention to the area. The term is from the French word, bouton, To call attention to the area use solid colored meaning a round object. Since the 13th century, buttons on prints and patterned buttons on buttons have been used as fasteners. Before that, solid color fabrics. they were used more for their decorative and symbolic value. Today, buttons continue to be used as decoration, but their placement once served a useful purpose. For instance buttons on the back of men’s coats served as a way to fasten coat tails up out of the $ Use a smooth, flat-textured button on smooth way when riding on horseback. During Frederick textured fabrics. Shiny buttons are best on the Great=s reign, it was customary for three decorative, shiny fabrics.
    [Show full text]
  • Bound Plackets
    CT-MMB.218 Bound Plackets Plackets are used to finish garment openings and allow dressing ease. They are used at necklines with neckbands, sleeves with cuffs, and at waistlines with waistbands. Plackets may also be used as design elements at pant and skirt hems. Continuous Lap Placket The continuous lap placket can be used on sleeves, at the back of a neckline, or below a back button opening especially on children’s wear. The placket binding may be cut on the straight grain or bias from the same fabric as the garment being made. It should be cut 1 ¼ inches wide and be one inch longer than twice the length of the placket opening. Press ¼ inch under along one long edge of the binding. Prepare the placket opening by transferring the pattern marking to the garment. Following the marking; stitch with small machine stitches (15 stitches per inch)to reinforce the opening. Taking one or two stitches across the point of the marking will make cutting the opening easier. Cut the opening between the stitched lines all the way to the point being careful not to clip the reinforcement stitches. (Figure 1) Spread the cut area open and place the right side of the placket binding to the wrong side of the garment. Pin the reinforcement stitching ¼ inch from the edge of the binding. Sew ¼ inch seam just outside of the reinforcement stitching. (Figure 2) Bring folded edge of binding to front covering the previous stitching and sew close to the fold. (Figure 3) Fold placket into place, lapping binding evenly by folding binding under on the overlap.
    [Show full text]